freebsd-nq/sys/i386/bios/apm.c
Bruce Evans 97e156674d Don't include <sys/tty.h> in drivers that aren't tty drivers or in general
files that don't depend on the internals of <sys/tty.h>
1995-07-16 10:13:08 +00:00

997 lines
22 KiB
C

/*
* APM (Advanced Power Management) BIOS Device Driver
*
* Copyright (c) 1994 UKAI, Fumitoshi.
* Copyright (c) 1994-1995 by HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
*
* This software may be used, modified, copied, and distributed, in
* both source and binary form provided that the above copyright and
* these terms are retained. Under no circumstances is the author
* responsible for the proper functioning of this software, nor does
* the author assume any responsibility for damages incurred with its
* use.
*
* Sep, 1994 Implemented on FreeBSD 1.1.5.1R (Toshiba AVS001WD)
*
* $Id: apm.c,v 1.12 1995/05/30 07:58:06 rgrimes Exp $
*/
#include "apm.h"
#if NAPM > 0
#ifdef __FreeBSD__
#include <sys/param.h>
#include "conf.h"
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/ioctl.h>
#include <sys/file.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include "i386/isa/isa.h"
#include "i386/isa/isa_device.h"
#include <machine/apm_bios.h>
#include <machine/segments.h>
#include <machine/clock.h>
#include <vm/vm.h>
#include <sys/syslog.h>
#include "apm_setup.h"
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
#include <mach/std_types.h>
#include <sys/types.h>
#include <sys/time.h>
#include <device/conf.h>
#include <device/errno.h>
#include <device/tty.h>
#include <device/io_req.h>
#include <kern/time_out.h>
#include <i386/ipl.h>
#include <i386/pio.h>
#include <i386/seg.h>
#include <i386/machspl.h>
#include <chips/busses.h>
#include <i386at/apm_bios.h>
#include <i386at/apm_setup.h>
#include <i386at/apm_segments.h>
#endif /* MACH_KERNEL */
/* static data */
struct apm_softc {
int initialized, active, halt_cpu;
u_int minorversion, majorversion;
u_int cs32_base, cs16_base, ds_base;
u_int cs_limit, ds_limit;
u_int cs_entry;
u_int intversion;
int idle_cpu, disabled, disengaged;
struct apmhook sc_suspend;
struct apmhook sc_resume;
};
static struct apm_softc apm_softc[NAPM];
static struct apm_softc *master_softc = NULL; /* XXX */
struct apmhook *hook[NAPM_HOOK]; /* XXX */
#ifdef APM_SLOWSTART
int apm_slowstart = 0;
int apm_ss_cnt = 0;
static int apm_slowstart_p = 0;
int apm_slowstart_stat = 0;
#endif /* APM_SLOWSTART */
#ifdef MACH_KERNEL
extern struct fake_descriptor gdt[GDTSZ];
extern void fix_desc(struct fake_descriptor *, int);
#endif /* MACH_KERNEL */
#define is_enabled(foo) ((foo) ? "enabled" : "disabled")
/* Map version number to integer (keeps ordering of version numbers) */
#define INTVERSION(major, minor) ((major)*100 + (minor))
#ifdef __FreeBSD__
static timeout_t apm_timeout;
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
static void apm_timeout(void *);
#endif /* MACH_KERNEL */
/* setup APM GDT discriptors */
static void
setup_apm_gdt(u_int code32_base, u_int code16_base, u_int data_base, u_int code_limit, u_int data_limit)
{
#ifdef __FreeBSD__
/* setup 32bit code segment */
gdt_segs[GAPMCODE32_SEL].ssd_base = code32_base;
gdt_segs[GAPMCODE32_SEL].ssd_limit = code_limit;
/* setup 16bit code segment */
gdt_segs[GAPMCODE16_SEL].ssd_base = code16_base;
gdt_segs[GAPMCODE16_SEL].ssd_limit = code_limit;
/* setup data segment */
gdt_segs[GAPMDATA_SEL ].ssd_base = data_base;
gdt_segs[GAPMDATA_SEL ].ssd_limit = data_limit;
/* reflect these changes on physical GDT */
ssdtosd(gdt_segs + GAPMCODE32_SEL, &gdt[GAPMCODE32_SEL].sd);
ssdtosd(gdt_segs + GAPMCODE16_SEL, &gdt[GAPMCODE16_SEL].sd);
ssdtosd(gdt_segs + GAPMDATA_SEL , &gdt[GAPMDATA_SEL ].sd);
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
/* setup 32bit code segment */
gdt[sel_idx(GAPMCODE32_SEL)].offset = code32_base;
gdt[sel_idx(GAPMCODE32_SEL)].lim_or_seg = code_limit;
gdt[sel_idx(GAPMCODE32_SEL)].size_or_wdct = SZ_32;
gdt[sel_idx(GAPMCODE32_SEL)].access = ACC_P | ACC_PL_K | ACC_CODE_R;
/* setup 16bit code segment */
gdt[sel_idx(GAPMCODE16_SEL)].offset = code16_base;
gdt[sel_idx(GAPMCODE16_SEL)].lim_or_seg = code_limit;
gdt[sel_idx(GAPMCODE16_SEL)].size_or_wdct = 0;
gdt[sel_idx(GAPMCODE16_SEL)].access = ACC_P | ACC_PL_K | ACC_CODE_R;
/* setup data segment */
gdt[sel_idx(GAPMDATA_SEL )].offset = data_base;
gdt[sel_idx(GAPMDATA_SEL )].lim_or_seg = data_limit;
gdt[sel_idx(GAPMDATA_SEL )].size_or_wdct = 0;
gdt[sel_idx(GAPMDATA_SEL )].access = ACC_P | ACC_PL_K | ACC_DATA_W;
/* reflect these changes on physical GDT */
fix_desc(gdt + sel_idx(GAPMCODE32_SEL), 1);
fix_desc(gdt + sel_idx(GAPMCODE16_SEL), 1);
fix_desc(gdt + sel_idx(GAPMDATA_SEL) , 1);
#endif /* MACH_KERNEL */
}
/* 48bit far pointer */
struct addr48 {
u_long offset;
u_short segment;
} apm_addr;
int apm_errno;
inline
int
apm_int(u_long *eax, u_long *ebx, u_long *ecx)
{
u_long cf;
__asm ("pushl %%ebp
pushl %%edx
pushl %%esi
xorl %3,%3
movl %3,%%esi
lcall _apm_addr
jnc 1f
incl %3
1:
popl %%esi
popl %%edx
popl %%ebp"
: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=D" (cf)
: "0" (*eax), "1" (*ebx), "2" (*ecx)
);
apm_errno = ((*eax) >> 8) & 0xff;
return cf;
}
/* enable/disable power management */
static int
apm_enable_disable_pm(struct apm_softc *sc, int enable)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_ENABLEDISABLEPM;
if (sc->intversion >= INTVERSION(1, 1)) {
ebx = PMDV_ALLDEV;
} else {
ebx = 0xffff; /* APM version 1.0 only */
}
ecx = enable;
return apm_int(&eax, &ebx, &ecx);
}
/* Tell APM-BIOS that WE will do 1.1 and see what they say... */
static void
apm_driver_version(void)
{
u_long eax, ebx, ecx, i;
#ifdef APM_DEBUG
eax = (APM_BIOS<<8) | APM_INSTCHECK;
ebx = 0x0;
ecx = 0x0101;
i = apm_int(&eax, &ebx, &ecx);
printf("[%04lx %04lx %04lx %ld %02x]\n",
eax, ebx, ecx, i, apm_errno);
#endif
eax = (APM_BIOS << 8) | APM_DRVVERSION;
ebx = 0x0;
ecx = 0x0101;
if(!apm_int(&eax, &ebx, &ecx))
apm_version = eax & 0xffff;
#ifdef APM_DEBUG
eax = (APM_BIOS << 8) | APM_INSTCHECK;
ebx = 0x0;
ecx = 0x0101;
i = apm_int(&eax, &ebx, &ecx);
printf("[%04lx %04lx %04lx %ld %02x]\n",
eax, ebx, ecx, i, apm_errno);
#endif
}
/* engage/disengage power management (APM 1.1 or later) */
static int
apm_engage_disengage_pm(struct apm_softc *sc, int engage)
{
u_long eax, ebx, ecx, i;
eax = (APM_BIOS << 8) | APM_ENGAGEDISENGAGEPM;
ebx = PMDV_ALLDEV;
ecx = engage;
i = apm_int(&eax, &ebx, &ecx);
return i;
}
/* get PM event */
static u_int
apm_getevent(struct apm_softc *sc)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_GETPMEVENT;
ebx = 0;
ecx = 0;
if (apm_int(&eax, &ebx, &ecx))
return PMEV_NOEVENT;
return ebx & 0xffff;
}
/* suspend entire system */
static int
apm_suspend_system(struct apm_softc *sc)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_SETPWSTATE;
ebx = PMDV_ALLDEV;
ecx = PMST_SUSPEND;
__asm("cli");
if (apm_int(&eax, &ebx, &ecx)) {
__asm("sti");
printf("Entire system suspend failure: errcode = %ld\n",
0xff & (eax >> 8));
return 1;
}
__asm("sti");
return 0;
}
/* Display control */
/*
* Experimental implementation: My laptop machine can't handle this function
* If your laptop can control the display via APM, please inform me.
* HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
*/
int
apm_display_off(void)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_SETPWSTATE;
ebx = PMDV_2NDSTORAGE0;
ecx = PMST_STANDBY;
if (apm_int(&eax, &ebx, &ecx)) {
printf("Display off failure: errcode = %ld\n",
0xff & (eax >> 8));
return 1;
}
return 0;
}
/* APM Battery low handler */
static void
apm_battery_low(struct apm_softc *sc)
{
printf("\007\007 * * * BATTERY IS LOW * * * \007\007");
}
/* APM hook manager */
static struct apmhook *
apm_add_hook(struct apmhook **list, struct apmhook *ah)
{
int s;
struct apmhook *p, *prev;
#if 0
printf("Add hook \"%s\"\n", ah->ah_name);
#endif
s = splhigh();
if (ah == NULL) {
panic("illegal apm_hook!");
}
prev = NULL;
for (p = *list; p != NULL; prev = p, p = p->ah_next) {
if (p->ah_order > ah->ah_order) {
break;
}
}
if (prev == NULL) {
ah->ah_next = *list;
*list = ah;
} else {
ah->ah_next = prev->ah_next;
prev->ah_next = ah;
}
splx(s);
return ah;
}
static void
apm_del_hook(struct apmhook **list, struct apmhook *ah)
{
int s;
struct apmhook *p, *prev;
s = splhigh();
prev = NULL;
for (p = *list; p != NULL; prev = p, p = p->ah_next) {
if (p == ah) {
goto deleteit;
}
}
panic("Tried to delete unregistered apm_hook.");
goto nosuchnode;
deleteit:
if (prev != NULL) {
prev->ah_next = p->ah_next;
} else {
*list = p->ah_next;
}
nosuchnode:
splx(s);
}
/* APM driver calls some functions automatically */
static void
apm_execute_hook(struct apmhook *list)
{
struct apmhook *p;
for (p = list; p != NULL; p = p->ah_next) {
#if 0
printf("Execute APM hook \"%s.\"\n", p->ah_name);
#endif
if ((*(p->ah_fun))(p->ah_arg)) {
printf("Warning: APM hook \"%s\" failed", p->ah_name);
}
}
}
/* establish an apm hook */
struct apmhook *
apm_hook_establish(int apmh, struct apmhook *ah)
{
if (apmh < 0 || apmh >= NAPM_HOOK)
return NULL;
return apm_add_hook(&hook[apmh], ah);
}
/* disestablish an apm hook */
void
apm_hook_disestablish(int apmh, struct apmhook *ah)
{
if (apmh < 0 || apmh >= NAPM_HOOK)
return;
apm_del_hook(&hook[apmh], ah);
}
static struct timeval suspend_time;
static struct timeval diff_time;
static int
apm_default_resume(struct apm_softc *sc)
{
#ifdef __FreeBSD__
int pl;
u_int second, minute, hour;
struct timeval resume_time, tmp_time;
/* modified for adjkerntz */
pl = splsoftclock();
inittodr(0); /* adjust time to RTC */
microtime(&resume_time);
tmp_time = time; /* because 'time' is volatile */
timevaladd(&tmp_time, &diff_time);
time = tmp_time;
splx(pl);
second = resume_time.tv_sec - suspend_time.tv_sec;
hour = second / 3600;
second %= 3600;
minute = second / 60;
second %= 60;
log(LOG_NOTICE, "resumed from suspended mode (slept %02d:%02d:%02d)\n",
hour, minute, second);
#endif /* __FreeBSD__ */
return 0;
}
static int
apm_default_suspend(void)
{
#ifdef __FreeBSD__
int pl;
pl = splsoftclock();
microtime(&diff_time);
inittodr(0);
microtime(&suspend_time);
timevalsub(&diff_time, &suspend_time);
splx(pl);
#if 0
printf("diff_time = %d:%d\n", diff_time.tv_sec, diff_time.tv_usec);
#endif
#endif /* __FreeBSD__ */
return 0;
}
static void apm_processevent(struct apm_softc *);
/*
* Public interface to the suspend/resume:
*
* Execute suspend and resume hook before and after sleep, respectively.
*
*/
void
apm_suspend(void)
{
struct apm_softc *sc;
sc = master_softc; /* XXX */
if (!sc)
return;
if (sc->initialized) {
apm_execute_hook(hook[APM_HOOK_SUSPEND]);
apm_suspend_system(sc);
apm_processevent(sc);
}
}
void
apm_resume(void)
{
struct apm_softc *sc;
sc = master_softc; /* XXX */
if (!sc)
return;
if (sc->initialized) {
apm_execute_hook(hook[APM_HOOK_RESUME]);
}
}
/* get APM information */
static int
apm_get_info(struct apm_softc *sc, apm_info_t aip)
{
u_long eax, ebx, ecx;
eax = (APM_BIOS << 8) | APM_GETPWSTATUS;
ebx = PMDV_ALLDEV;
ecx = 0;
if (apm_int(&eax, &ebx, &ecx))
return 1;
aip->ai_acline = (ebx >> 8) & 0xff;
aip->ai_batt_stat = ebx & 0xff;
aip->ai_batt_life = ecx & 0xff;
aip->ai_major = (u_int)sc->majorversion;
aip->ai_minor = (u_int)sc->minorversion;
return 0;
}
/* inform APM BIOS that CPU is idle */
void
apm_cpu_idle(void)
{
struct apm_softc *sc = master_softc; /* XXX */
if (sc->idle_cpu) {
if (sc->active) {
__asm ("movw $0x5305, %ax; lcall _apm_addr");
}
}
/*
* Some APM implementation halts CPU in BIOS, whenever
* "CPU-idle" function are invoked, but swtch() of
* FreeBSD halts CPU, therefore, CPU is halted twice
* in the sched loop. It makes the interrupt latency
* terribly long and be able to cause a serious problem
* in interrupt processing. We prevent it by removing
* "hlt" operation from swtch() and managed it under
* APM driver.
*/
/*
* UKAI Note: on NetBSD, idle() called from cpu_switch()
* doesn't halt CPU, so halt_cpu may not need on NetBSD/i386
* or only "sti" operation would be needed.
*/
if (!sc->active || sc->halt_cpu) {
__asm("sti ; hlt"); /* wait for interrupt */
}
}
/* inform APM BIOS that CPU is busy */
void
apm_cpu_busy(void)
{
struct apm_softc *sc = master_softc; /* XXX */
if (sc->idle_cpu && sc->active) {
__asm("movw $0x5306, %ax; lcall _apm_addr");
}
}
/*
* APM timeout routine:
*
* This routine is automatically called by timer once per second.
*/
static void
apm_timeout(void *arg)
{
struct apm_softc *sc = arg;
apm_processevent(sc);
timeout(apm_timeout, (void *)sc, hz - 1 ); /* More than 1 Hz */
}
/* enable APM BIOS */
static void
apm_event_enable(struct apm_softc *sc)
{
#ifdef APM_DEBUG
printf("called apm_event_enable()\n");
#endif
if (sc->initialized) {
sc->active = 1;
apm_timeout(sc);
}
}
/* disable APM BIOS */
static void
apm_event_disable(struct apm_softc *sc)
{
#ifdef APM_DEBUG
printf("called apm_event_disable()\n");
#endif
if (sc->initialized) {
untimeout(apm_timeout, NULL);
sc->active = 0;
}
}
/* halt CPU in scheduling loop */
static void
apm_halt_cpu(struct apm_softc *sc)
{
if (sc->initialized) {
sc->halt_cpu = 1;
}
#ifdef APM_SLOWSTART
apm_slowstart = 0;
#endif /* APM_SLOWSTART */
}
/* don't halt CPU in scheduling loop */
static void
apm_not_halt_cpu(struct apm_softc *sc)
{
if (sc->initialized) {
sc->halt_cpu = 0;
}
#ifdef APM_SLOWSTART
apm_slowstart = apm_slowstart_p;
#endif /* APM_SLOWSTART */
}
/* device driver definitions */
#ifdef __FreeBSD__
int apmprobe (struct isa_device *);
int apmattach(struct isa_device *);
struct isa_driver apmdriver = {
apmprobe, apmattach, "apm" };
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
int apmprobe(vm_offset_t, struct bus_ctlr *);
void apmattach(struct bus_device *);
static struct bus_device *apminfo[NAPM];
static vm_offset_t apmstd[NAPM] = { 0 };
struct bus_driver apmdriver = {
apmprobe, 0, apmattach, 0, apmstd, "apm", apminfo, 0, 0, 0};
#endif /* MACH_KERNEL */
/*
* probe APM (dummy):
*
* APM probing routine is placed on locore.s and apm_init.S because
* this process forces the CPU to turn to real mode or V86 mode.
* Current version uses real mode, but on future version, we want
* to use V86 mode in APM initialization.
*/
int
#ifdef __FreeBSD__
apmprobe(struct isa_device *dvp)
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
apmprobe(vm_offset_t port, struct bus_ctlr *devc)
#endif /* MACH_KERNEL */
{
#ifdef __FreeBSD__
int unit = dvp->id_unit;
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
int unit = devc->unit;
#endif /* MACH_KERNEL */
struct apm_softc *sc = &apm_softc[unit];
switch (apm_version) {
case APMINI_CANTFIND:
/* silent */
return 0;
case APMINI_NOT32BIT:
printf("apm%d: 32bit connection is not supported.\n", unit);
return 0;
case APMINI_CONNECTERR:
printf("apm%d: 32-bit connection error.\n", unit);
return 0;
}
return -1;
}
/* Process APM event */
static void
apm_processevent(struct apm_softc *sc)
{
int apm_event;
#ifdef APM_DEBUG
# define OPMEV_DEBUGMESSAGE(symbol) case symbol: \
printf("Original APM Event: " #symbol "\n");
#else
# define OPMEV_DEBUGMESSAGE(symbol) case symbol:
#endif
while (1) {
apm_event = apm_getevent(sc);
if (apm_event == PMEV_NOEVENT)
break;
switch (apm_event) {
OPMEV_DEBUGMESSAGE(PMEV_STANDBYREQ);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_SUSPENDREQ);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_USERSUSPENDREQ);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_CRITSUSPEND);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_NORMRESUME);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_CRITRESUME);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_STANDBYRESUME);
apm_resume();
break;
OPMEV_DEBUGMESSAGE(PMEV_BATTERYLOW);
apm_battery_low(sc);
apm_suspend();
break;
OPMEV_DEBUGMESSAGE(PMEV_POWERSTATECHANGE);
break;
OPMEV_DEBUGMESSAGE(PMEV_UPDATETIME);
inittodr(0); /* adjust time to RTC */
break;
default:
printf("Unknown Original APM Event 0x%x\n", apm_event);
break;
}
}
}
/*
* Attach APM:
*
* Initialize APM driver (APM BIOS itself has been initialized in locore.s)
*
* Now, unless I'm mad, (not quite ruled out yet), the APM-1.1 spec is bogus:
*
* Appendix C says under the header "APM 1.0/APM 1.1 Modal BIOS Behavior"
* that "When an APM Driver connects with an APM 1.1 BIOS, the APM 1.1 BIOS
* will default to an APM 1.0 connection. After an APM Driver calls the APM
* Driver Version function, specifying that it supports APM 1.1, and [sic!]
* APM BIOS will change its behavior to an APM 1.1 connection. If the APM
* BIOS is an APM 1.0 BIOS, the APM Driver Version function call will fail,
* and the connection will remain an APM 1.0 connection."
*
* OK so I can establish a 1.0 connection, and then tell that I'm a 1.1
* and maybe then the BIOS will tell that it too is a 1.1.
* Fine.
* Now how will I ever get the segment-limits for instance ? There is no
* way I can see that I can get a 1.1 response back from an "APM Protected
* Mode 32-bit Interface Connect" function ???
*
* Who made this, Intel and Microsoft ? -- How did you guess !
*
* /phk
*/
#ifdef __FreeBSD__
int
apmattach(struct isa_device *dvp)
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
void
apmattach(struct bus_device *dvp)
#endif /* MACH_KERNEL */
{
#ifdef __FreeBSD__
int unit = dvp->id_unit;
#define APM_KERNBASE KERNBASE
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
int unit = dvp->unit;
#define APM_KERNBASE VM_MIN_KERNEL_ADDRESS
#endif /* MACH_KERNEL */
struct apm_softc *sc = &apm_softc[unit];
int i;
master_softc = sc; /* XXX */
sc->initialized = 0;
sc->active = 0;
sc->halt_cpu = 1;
/* setup APM parameters */
sc->cs16_base = (apm_cs32_base << 4) + APM_KERNBASE;
sc->cs32_base = (apm_cs16_base << 4) + APM_KERNBASE;
sc->ds_base = (apm_ds_base << 4) + APM_KERNBASE;
sc->cs_limit = apm_cs_limit;
sc->ds_limit = apm_ds_limit;
sc->cs_entry = apm_cs_entry;
sc->idle_cpu = ((apm_flags & APM_CPUIDLE_SLOW) != 0);
sc->disabled = ((apm_flags & APM_DISABLED) != 0);
sc->disengaged = ((apm_flags & APM_DISENGAGED) != 0);
#ifdef APM_SLOWSTART
if (sc->idle_cpu) {
apm_slowstart = apm_slowstart_p = 1;
}
#endif
/* print bootstrap messages */
#ifdef APM_DEBUG
printf(" found APM BIOS version %04x\n", apm_version);
printf("apm%d: Code32 0x%08x, Code16 0x%08x, Data 0x%08x\n",
unit, sc->cs32_base, sc->cs16_base, sc->ds_base);
printf("apm%d: Code entry 0x%08x, Idling CPU %s, Management %s\n",
unit, sc->cs_entry, is_enabled(sc->idle_cpu),
is_enabled(!sc->disabled));
printf("apm%d: CS_limit=%x, DS_limit=%x\n",
unit, sc->cs_limit, sc->ds_limit);
#endif /* APM_DEBUG */
sc->cs_limit = 0xffff;
sc->ds_limit = 0xffff;
/* setup GDT */
setup_apm_gdt(sc->cs32_base, sc->cs16_base, sc->ds_base,
sc->cs_limit, sc->ds_limit);
/* setup entry point 48bit pointer */
#ifdef __FreeBSD__
apm_addr.segment = GSEL(GAPMCODE32_SEL, SEL_KPL);
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
apm_addr.segment = GAPMCODE32_SEL;
#endif /* MACH_KERNEL */
apm_addr.offset = sc->cs_entry;
/* Try to kick bios into 1.1 mode */
apm_driver_version();
sc->minorversion = ((apm_version & 0x00f0) >> 4) * 10 +
((apm_version & 0x000f) >> 0);
sc->majorversion = ((apm_version & 0xf000) >> 12) * 10 +
((apm_version & 0x0f00) >> 8);
sc->intversion = INTVERSION(sc->majorversion, sc->minorversion);
if (sc->intversion >= INTVERSION(1, 1)) {
printf("apm%d: Engaged control %s\n",
unit, is_enabled(!sc->disengaged));
}
printf(" found APM BIOS version %d.%d\n",
sc->majorversion, sc->minorversion);
printf("apm%d: Idling CPU %s\n", unit, is_enabled(sc->idle_cpu));
/* enable power management */
if (sc->disabled) {
if (apm_enable_disable_pm(sc, 1)) {
printf("Warning: APM enable function failed! [%x]\n",
apm_errno);
}
}
/* engage power managment (APM 1.1 or later) */
if (sc->intversion >= INTVERSION(1, 1) && sc->disengaged) {
if (apm_engage_disengage_pm(sc, 1)) {
printf("Warning: APM engage function failed [%x]\n",
apm_errno);
}
}
/* default suspend hook */
sc->sc_suspend.ah_fun = apm_default_suspend;
sc->sc_suspend.ah_arg = sc;
sc->sc_suspend.ah_name = "default suspend";
sc->sc_suspend.ah_order = APM_MAX_ORDER;
/* default resume hook */
sc->sc_resume.ah_fun = apm_default_resume;
sc->sc_resume.ah_arg = sc;
sc->sc_resume.ah_name = "default resume";
sc->sc_resume.ah_order = APM_MIN_ORDER;
apm_hook_establish(APM_HOOK_SUSPEND, &sc->sc_suspend);
apm_hook_establish(APM_HOOK_RESUME , &sc->sc_resume);
apm_event_enable(sc);
sc->initialized = 1;
#ifdef __FreeBSD__
return 0;
#endif /* __FreeBSD__ */
}
#ifdef __FreeBSD__
int
apmopen(dev_t dev, int flag, int fmt, struct proc *p)
{
struct apm_softc *sc = &apm_softc[minor(dev)];
if (minor(dev) >= NAPM) {
return (ENXIO);
}
if (!sc->initialized) {
return ENXIO;
}
return 0;
}
int
apmclose(dev_t dev, int flag, int fmt, struct proc *p)
{
return 0;
}
int
apmioctl(dev_t dev, int cmd, caddr_t addr, int flag, struct proc *p)
{
struct apm_softc *sc = &apm_softc[minor(dev)];
int error = 0;
int pl;
#ifdef APM_DEBUG
printf("APM ioctl: minor = %d, cmd = 0x%x\n", minor(dev), cmd);
#endif
if (minor(dev) >= NAPM) {
return ENXIO;
}
if (!sc->initialized) {
return ENXIO;
}
switch (cmd) {
case APMIO_SUSPEND:
apm_suspend();
break;
case APMIO_GETINFO:
if (apm_get_info(sc, (apm_info_t)addr)) {
error = ENXIO;
}
break;
case APMIO_ENABLE:
apm_event_enable(sc);
break;
case APMIO_DISABLE:
apm_event_disable(sc);
break;
case APMIO_HALTCPU:
apm_halt_cpu(sc);
break;
case APMIO_NOTHALTCPU:
apm_not_halt_cpu(sc);
break;
case APMIO_DISPLAYOFF:
if (apm_display_off()) {
error = ENXIO;
}
break;
default:
error = EINVAL;
break;
}
return error;
}
#endif /* __FreeBSD__ */
#ifdef MACH_KERNEL
io_return_t apmopen(dev_t dev, int flag, io_req_t ior)
{
int result;
result = ENXIO;
return result;
}
io_return_t apmclose(dev_t dev, int flag)
{
return 0;
}
io_return_t apmgetstat(dev_t dev, int flavor, int *data, u_int *count)
{
}
io_return_t apmsetstat(dev_t dev, int flavor, int *data, u_int count)
{
}
#endif /* MACH_KERNEL */
#endif /* NAPM > 0 */