freebsd-nq/sys/isa/kbdio.h
Kazutaka YOKOTA cc7495b5c1 Move IO_PSMSIZE from kbdio.h to isareg.h.
While I am here, correct the values for IO_MDASIZE and IO_CGASIZE; they
  should be 12 rather than 16.
1999-01-06 05:49:30 +00:00

208 lines
6.7 KiB
C

/*-
* Copyright (c) 1996 Kazutaka YOKOTA (yokota@zodiac.mech.utsunomiya-u.ac.jp)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: kbdio.h,v 1.8 1998/08/06 09:15:53 dfr Exp $
* from: i386/isa kbdio.h,v 1.7
*/
#ifndef _I386_ISA_KBDIO_H_
#define _I386_ISA_KBDIO_H_
/* constants */
/* I/O ports */
#ifdef PC98
#define KBD_STATUS_PORT 2 /* status port, read */
#define KBD_COMMAND_PORT 2 /* controller command port, write */
#define KBD_DATA_PORT 0 /* data port, read/write
* also used as keyboard command
* and mouse command port
*/
#else
#define KBD_STATUS_PORT 4 /* status port, read */
#define KBD_COMMAND_PORT 4 /* controller command port, write */
#define KBD_DATA_PORT 0 /* data port, read/write
* also used as keyboard command
* and mouse command port
*/
#endif /* PC98 */
/* controller commands (sent to KBD_COMMAND_PORT) */
#define KBDC_SET_COMMAND_BYTE 0x0060
#define KBDC_GET_COMMAND_BYTE 0x0020
#define KBDC_WRITE_TO_AUX 0x00d4
#define KBDC_DISABLE_AUX_PORT 0x00a7
#define KBDC_ENABLE_AUX_PORT 0x00a8
#define KBDC_TEST_AUX_PORT 0x00a9
#define KBDC_DIAGNOSE 0x00aa
#define KBDC_TEST_KBD_PORT 0x00ab
#define KBDC_DISABLE_KBD_PORT 0x00ad
#define KBDC_ENABLE_KBD_PORT 0x00ae
/* controller command byte (set by KBDC_SET_COMMAND_BYTE) */
#define KBD_TRANSLATION 0x0040
#define KBD_RESERVED_BITS 0x0004
#define KBD_OVERRIDE_KBD_LOCK 0x0008
#define KBD_ENABLE_KBD_PORT 0x0000
#define KBD_DISABLE_KBD_PORT 0x0010
#define KBD_ENABLE_AUX_PORT 0x0000
#define KBD_DISABLE_AUX_PORT 0x0020
#define KBD_ENABLE_AUX_INT 0x0002
#define KBD_DISABLE_AUX_INT 0x0000
#define KBD_ENABLE_KBD_INT 0x0001
#define KBD_DISABLE_KBD_INT 0x0000
#define KBD_KBD_CONTROL_BITS (KBD_DISABLE_KBD_PORT | KBD_ENABLE_KBD_INT)
#define KBD_AUX_CONTROL_BITS (KBD_DISABLE_AUX_PORT | KBD_ENABLE_AUX_INT)
/* keyboard device commands (sent to KBD_DATA_PORT) */
#define KBDC_RESET_KBD 0x00ff
#define KBDC_ENABLE_KBD 0x00f4
#define KBDC_DISABLE_KBD 0x00f5
#define KBDC_SET_DEFAULTS 0x00f6
#define KBDC_SEND_DEV_ID 0x00f2
#define KBDC_SET_LEDS 0x00ed
#define KBDC_ECHO 0x00ee
#define KBDC_SET_SCANCODE_SET 0x00f0
#define KBDC_SET_TYPEMATIC 0x00f3
/* aux device commands (sent to KBD_DATA_PORT) */
#define PSMC_RESET_DEV 0x00ff
#define PSMC_ENABLE_DEV 0x00f4
#define PSMC_DISABLE_DEV 0x00f5
#define PSMC_SET_DEFAULTS 0x00f6
#define PSMC_SEND_DEV_ID 0x00f2
#define PSMC_SEND_DEV_STATUS 0x00e9
#define PSMC_SEND_DEV_DATA 0x00eb
#define PSMC_SET_SCALING11 0x00e6
#define PSMC_SET_SCALING21 0x00e7
#define PSMC_SET_RESOLUTION 0x00e8
#define PSMC_SET_STREAM_MODE 0x00ea
#define PSMC_SET_REMOTE_MODE 0x00f0
#define PSMC_SET_SAMPLING_RATE 0x00f3
/* PSMC_SET_RESOLUTION argument */
#define PSMD_RES_LOW 0 /* typically 25ppi */
#define PSMD_RES_MEDIUM_LOW 1 /* typically 50ppi */
#define PSMD_RES_MEDIUM_HIGH 2 /* typically 100ppi (default) */
#define PSMD_RES_HIGH 3 /* typically 200ppi */
#define PSMD_MAX_RESOLUTION PSMD_RES_HIGH
/* PSMC_SET_SAMPLING_RATE */
#define PSMD_MAX_RATE 255 /* FIXME: not sure if it's possible */
/* status bits (KBD_STATUS_PORT) */
#ifdef PC98
#define KBDS_BUFFER_FULL 0x0002
#define KBDS_ANY_BUFFER_FULL 0x0002
#define KBDS_KBD_BUFFER_FULL 0x0002
#define KBDS_AUX_BUFFER_FULL 0x0002
#else
#define KBDS_BUFFER_FULL 0x0021
#define KBDS_ANY_BUFFER_FULL 0x0001
#define KBDS_KBD_BUFFER_FULL 0x0001
#define KBDS_AUX_BUFFER_FULL 0x0021
#endif
#define KBDS_INPUT_BUFFER_FULL 0x0002
/* return code */
#define KBD_ACK 0x00fa
#define KBD_RESEND 0x00fe
#define KBD_RESET_DONE 0x00aa
#define KBD_RESET_FAIL 0x00fc
#define KBD_DIAG_DONE 0x0055
#define KBD_DIAG_FAIL 0x00fd
#define KBD_ECHO 0x00ee
#define PSM_ACK 0x00fa
#define PSM_RESEND 0x00fe
#define PSM_RESET_DONE 0x00aa
#define PSM_RESET_FAIL 0x00fc
/* aux device ID */
#define PSM_MOUSE_ID 0
#define PSM_BALLPOINT_ID 2
#define PSM_INTELLI_ID 3
#ifdef KERNEL
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
/* types/structures */
typedef caddr_t KBDC;
/* function prototypes */
KBDC kbdc_open __P((int port));
int kbdc_lock __P((KBDC kbdc, int lock));
int kbdc_data_ready __P((KBDC kbdc));
int write_controller_command __P((KBDC kbdc,int c));
int write_controller_data __P((KBDC kbdc,int c));
int write_kbd_command __P((KBDC kbdc,int c));
int write_aux_command __P((KBDC kbdc,int c));
int send_kbd_command __P((KBDC kbdc,int c));
int send_aux_command __P((KBDC kbdc,int c));
int send_kbd_command_and_data __P((KBDC kbdc,int c,int d));
int send_aux_command_and_data __P((KBDC kbdc,int c,int d));
int read_controller_data __P((KBDC kbdc));
int read_kbd_data __P((KBDC kbdc));
int read_kbd_data_no_wait __P((KBDC kbdc));
int read_aux_data __P((KBDC kbdc));
int read_aux_data_no_wait __P((KBDC kbdc));
void empty_kbd_buffer __P((KBDC kbdc, int t));
void empty_aux_buffer __P((KBDC kbdc, int t));
void empty_both_buffers __P((KBDC kbdc, int t));
int reset_kbd __P((KBDC kbdc));
int reset_aux_dev __P((KBDC kbdc));
int test_controller __P((KBDC kbdc));
int test_kbd_port __P((KBDC kbdc));
int test_aux_port __P((KBDC kbdc));
int kbdc_get_device_mask __P((KBDC kbdc));
void kbdc_set_device_mask __P((KBDC kbdc, int mask));
int get_controller_command_byte __P((KBDC kbdc));
int set_controller_command_byte __P((KBDC kbdc, int command, int flag));
#endif /* KERNEL */
#endif /* !_I386_ISA_KBDIO_H_ */