freebsd-nq/sys/dev/iwm/if_iwm_debug.h
Kyle Evans 9a949c99e6 iwm - Improve firmware Time Event handling.
* This is a mix of the OpenBSD Git 7fd9664469d1b717a307eebd74aeececbd3c41cc
change, and syncing with the Linux iwlwifi code.

Taken-From: Linux iwlwifi, and OpenBSD

Submitted by:	Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from:	DragonFlyBSD (706a3044afd27c3fecfdf57bec1695310e53e228)
2019-01-24 03:47:04 +00:00

63 lines
2.7 KiB
C

/*-
* Copyright (c) 2015 Adrian Chadd <adrian@FreeBSD.org>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
* $FreeBSD$
*/
#ifndef __IF_IWM_DEBUG_H__
#define __IF_IWM_DEBUG_H__
#ifdef IWM_DEBUG
enum {
IWM_DEBUG_XMIT = 0x00000001, /* basic xmit operation */
IWM_DEBUG_RECV = 0x00000002, /* basic recv operation */
IWM_DEBUG_STATE = 0x00000004, /* 802.11 state transitions */
IWM_DEBUG_TXPOW = 0x00000008, /* tx power processing */
IWM_DEBUG_RESET = 0x00000010, /* reset processing */
IWM_DEBUG_OPS = 0x00000020, /* iwm_ops processing */
IWM_DEBUG_BEACON = 0x00000040, /* beacon handling */
IWM_DEBUG_WATCHDOG = 0x00000080, /* watchdog timeout */
IWM_DEBUG_INTR = 0x00000100, /* ISR */
IWM_DEBUG_CALIBRATE = 0x00000200, /* periodic calibration */
IWM_DEBUG_NODE = 0x00000400, /* node management */
IWM_DEBUG_LED = 0x00000800, /* led management */
IWM_DEBUG_CMD = 0x00001000, /* cmd submission */
IWM_DEBUG_TXRATE = 0x00002000, /* TX rate debugging */
IWM_DEBUG_PWRSAVE = 0x00004000, /* Power save operations */
IWM_DEBUG_SCAN = 0x00008000, /* Scan related operations */
IWM_DEBUG_STATS = 0x00010000, /* Statistics updates */
IWM_DEBUG_FIRMWARE_TLV = 0x00020000, /* Firmware TLV parsing */
IWM_DEBUG_TRANS = 0x00040000, /* Transport layer (eg PCIe) */
IWM_DEBUG_EEPROM = 0x00080000, /* EEPROM/channel information */
IWM_DEBUG_TEMP = 0x00100000, /* Thermal Sensor handling */
IWM_DEBUG_FW = 0x00200000, /* Firmware management */
IWM_DEBUG_LAR = 0x00400000, /* Location Aware Regulatory */
IWM_DEBUG_TE = 0x00800000, /* Time Event handling */
IWM_DEBUG_REGISTER = 0x20000000, /* print chipset register */
IWM_DEBUG_TRACE = 0x40000000, /* Print begin and start driver function */
IWM_DEBUG_FATAL = 0x80000000, /* fatal errors */
IWM_DEBUG_ANY = 0xffffffff
};
#define IWM_DPRINTF(sc, m, fmt, ...) do { \
if (sc->sc_debug & (m)) \
device_printf(sc->sc_dev, fmt, ##__VA_ARGS__); \
} while (0)
#else
#define IWM_DPRINTF(sc, m, fmt, ...) do { (void) sc; } while (0)
#endif
#endif /* __IF_IWM_DEBUG_H__ */