496 lines
12 KiB
C
496 lines
12 KiB
C
/*
|
|
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
#include <i386/isa/pcibus.h>
|
|
|
|
#ifdef PCI_COMPAT
|
|
/* XXX this is a terrible hack, which keeps the Tekram AMD SCSI driver happy */
|
|
#define cfgmech pci_mechanism
|
|
int cfgmech;
|
|
#else
|
|
static int cfgmech;
|
|
#endif /* PCI_COMPAT */
|
|
static int devmax;
|
|
|
|
/* enable configuration space accesses and return data port address */
|
|
|
|
static int
|
|
pci_cfgenable(unsigned bus, unsigned slot, unsigned func, int reg, int bytes)
|
|
{
|
|
int dataport = 0;
|
|
|
|
if (bus <= PCI_BUSMAX
|
|
&& slot < devmax
|
|
&& func <= PCI_FUNCMAX
|
|
&& reg <= PCI_REGMAX
|
|
&& bytes != 3
|
|
&& (unsigned) bytes <= 4
|
|
&& (reg & (bytes -1)) == 0) {
|
|
switch (cfgmech) {
|
|
case 1:
|
|
outl(CONF1_ADDR_PORT, (1 << 31)
|
|
| (bus << 16) | (slot << 11)
|
|
| (func << 8) | (reg & ~0x03));
|
|
dataport = CONF1_DATA_PORT + (reg & 0x03);
|
|
break;
|
|
case 2:
|
|
outb(CONF2_ENABLE_PORT, 0xf0 | (func << 1));
|
|
outb(CONF2_FORWARD_PORT, bus);
|
|
dataport = 0xc000 | (slot << 8) | reg;
|
|
break;
|
|
}
|
|
}
|
|
return (dataport);
|
|
}
|
|
|
|
/* disable configuration space accesses */
|
|
|
|
static void
|
|
pci_cfgdisable(void)
|
|
{
|
|
switch (cfgmech) {
|
|
case 1:
|
|
outl(CONF1_ADDR_PORT, 0);
|
|
break;
|
|
case 2:
|
|
outb(CONF2_ENABLE_PORT, 0);
|
|
outb(CONF2_FORWARD_PORT, 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* read configuration space register */
|
|
|
|
int
|
|
pci_cfgread(pcicfgregs *cfg, int reg, int bytes)
|
|
{
|
|
int data = -1;
|
|
int port;
|
|
|
|
port = pci_cfgenable(cfg->bus, cfg->slot, cfg->func, reg, bytes);
|
|
|
|
if (port != 0) {
|
|
switch (bytes) {
|
|
case 1:
|
|
data = inb(port);
|
|
break;
|
|
case 2:
|
|
data = inw(port);
|
|
break;
|
|
case 4:
|
|
data = inl(port);
|
|
break;
|
|
}
|
|
pci_cfgdisable();
|
|
}
|
|
return (data);
|
|
}
|
|
|
|
/* write configuration space register */
|
|
|
|
void
|
|
pci_cfgwrite(pcicfgregs *cfg, int reg, int data, int bytes)
|
|
{
|
|
int port;
|
|
|
|
port = pci_cfgenable(cfg->bus, cfg->slot, cfg->func, reg, bytes);
|
|
if (port != 0) {
|
|
switch (bytes) {
|
|
case 1:
|
|
outb(port, data);
|
|
break;
|
|
case 2:
|
|
outw(port, data);
|
|
break;
|
|
case 4:
|
|
outl(port, data);
|
|
break;
|
|
}
|
|
pci_cfgdisable();
|
|
}
|
|
}
|
|
|
|
/* check whether the configuration mechanism has been correct identified */
|
|
|
|
static int
|
|
pci_cfgcheck(int maxdev)
|
|
{
|
|
u_char device;
|
|
|
|
if (bootverbose)
|
|
printf("pci_cfgcheck:\tdevice ");
|
|
|
|
for (device = 0; device < maxdev; device++) {
|
|
unsigned id, class, header;
|
|
if (bootverbose)
|
|
printf("%d ", device);
|
|
|
|
id = inl(pci_cfgenable(0, device, 0, 0, 4));
|
|
if (id == 0 || id == -1)
|
|
continue;
|
|
|
|
class = inl(pci_cfgenable(0, device, 0, 8, 4)) >> 8;
|
|
if (bootverbose)
|
|
printf("[class=%06x] ", class);
|
|
if (class == 0 || (class & 0xf870ff) != 0)
|
|
continue;
|
|
|
|
header = inb(pci_cfgenable(0, device, 0, 14, 1));
|
|
if (bootverbose)
|
|
printf("[hdr=%02x] ", header);
|
|
if ((header & 0x7e) != 0)
|
|
continue;
|
|
|
|
if (bootverbose)
|
|
printf("is there (id=%08x)\n", id);
|
|
|
|
pci_cfgdisable();
|
|
return (1);
|
|
}
|
|
if (bootverbose)
|
|
printf("-- nothing found\n");
|
|
|
|
pci_cfgdisable();
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
pci_cfgopen(void)
|
|
{
|
|
unsigned long mode1res,oldval1;
|
|
unsigned char mode2res,oldval2;
|
|
|
|
oldval1 = inl(CONF1_ADDR_PORT);
|
|
|
|
if (bootverbose) {
|
|
printf("pci_open(1):\tmode 1 addr port (0x0cf8) is 0x%08lx\n",
|
|
oldval1);
|
|
}
|
|
|
|
if ((oldval1 & CONF1_ENABLE_MSK) == 0) {
|
|
|
|
cfgmech = 1;
|
|
devmax = 32;
|
|
|
|
outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK);
|
|
outb(CONF1_ADDR_PORT +3, 0);
|
|
mode1res = inl(CONF1_ADDR_PORT);
|
|
outl(CONF1_ADDR_PORT, oldval1);
|
|
|
|
if (bootverbose)
|
|
printf("pci_open(1a):\tmode1res=0x%08lx (0x%08lx)\n",
|
|
mode1res, CONF1_ENABLE_CHK);
|
|
|
|
if (mode1res) {
|
|
if (pci_cfgcheck(32))
|
|
return (cfgmech);
|
|
}
|
|
|
|
outl(CONF1_ADDR_PORT, CONF1_ENABLE_CHK1);
|
|
mode1res = inl(CONF1_ADDR_PORT);
|
|
outl(CONF1_ADDR_PORT, oldval1);
|
|
|
|
if (bootverbose)
|
|
printf("pci_open(1b):\tmode1res=0x%08lx (0x%08lx)\n",
|
|
mode1res, CONF1_ENABLE_CHK1);
|
|
|
|
if ((mode1res & CONF1_ENABLE_MSK1) == CONF1_ENABLE_RES1) {
|
|
if (pci_cfgcheck(32))
|
|
return (cfgmech);
|
|
}
|
|
}
|
|
|
|
oldval2 = inb(CONF2_ENABLE_PORT);
|
|
|
|
if (bootverbose) {
|
|
printf("pci_open(2):\tmode 2 enable port (0x0cf8) is 0x%02x\n",
|
|
oldval2);
|
|
}
|
|
|
|
if ((oldval2 & 0xf0) == 0) {
|
|
|
|
cfgmech = 2;
|
|
devmax = 16;
|
|
|
|
outb(CONF2_ENABLE_PORT, CONF2_ENABLE_CHK);
|
|
mode2res = inb(CONF2_ENABLE_PORT);
|
|
outb(CONF2_ENABLE_PORT, oldval2);
|
|
|
|
if (bootverbose)
|
|
printf("pci_open(2a):\tmode2res=0x%02x (0x%02x)\n",
|
|
mode2res, CONF2_ENABLE_CHK);
|
|
|
|
if (mode2res == CONF2_ENABLE_RES) {
|
|
if (bootverbose)
|
|
printf("pci_open(2a):\tnow trying mechanism 2\n");
|
|
|
|
if (pci_cfgcheck(16))
|
|
return (cfgmech);
|
|
}
|
|
}
|
|
|
|
cfgmech = 0;
|
|
devmax = 0;
|
|
return (cfgmech);
|
|
}
|
|
|
|
static devclass_t pcib_devclass;
|
|
|
|
static const char *
|
|
nexus_pcib_is_host_bridge(pcicfgregs *cfg,
|
|
u_int32_t id, u_int8_t class, u_int8_t subclass,
|
|
u_int8_t *busnum)
|
|
{
|
|
const char *s = NULL;
|
|
static u_int8_t pxb[4]; /* hack for 450nx */
|
|
|
|
*busnum = 0;
|
|
|
|
switch (id) {
|
|
case 0x12258086:
|
|
s = "Intel 824?? host to PCI bridge";
|
|
/* XXX This is a guess */
|
|
*busnum = pci_cfgread(cfg, 0x41, 1);
|
|
break;
|
|
case 0x71808086:
|
|
s = "Intel 82443LX (440 LX) host to PCI bridge";
|
|
break;
|
|
case 0x71908086:
|
|
s = "Intel 82443BX (440 BX) host to PCI bridge";
|
|
break;
|
|
case 0x71928086:
|
|
s = "Intel 82443BX host to PCI bridge (AGP disabled)";
|
|
break;
|
|
case 0x71a08086:
|
|
s = "Intel 82443GX host to PCI bridge";
|
|
break;
|
|
case 0x71a18086:
|
|
s = "Intel 82443GX host to AGP bridge";
|
|
break;
|
|
case 0x71a28086:
|
|
s = "Intel 82443GX host to PCI bridge (AGP disabled)";
|
|
break;
|
|
case 0x84c48086:
|
|
s = "Intel 82454KX/GX (Orion) host to PCI bridge";
|
|
*busnum = pci_cfgread(cfg, 0x4a, 1);
|
|
break;
|
|
case 0x84ca8086:
|
|
/*
|
|
* For the 450nx chipset, there is a whole bundle of
|
|
* things pretending to be host bridges. The MIOC will
|
|
* be seen first and isn't really a pci bridge (the
|
|
* actual busses are attached to the PXB's). We need to
|
|
* read the registers of the MIOC to figure out the
|
|
* bus numbers for the PXB channels.
|
|
*
|
|
* Since the MIOC doesn't have a pci bus attached, we
|
|
* pretend it wasn't there.
|
|
*/
|
|
pxb[0] = pci_cfgread(cfg, 0xd0, 1); /* BUSNO[0] */
|
|
pxb[1] = pci_cfgread(cfg, 0xd1, 1) + 1; /* SUBA[0]+1 */
|
|
pxb[2] = pci_cfgread(cfg, 0xd3, 1); /* BUSNO[1] */
|
|
pxb[3] = pci_cfgread(cfg, 0xd4, 1) + 1; /* SUBA[1]+1 */
|
|
return NULL;
|
|
case 0x84cb8086:
|
|
switch (cfg->slot) {
|
|
case 0x12:
|
|
s = "Intel 82454NX PXB#0, Bus#A";
|
|
*busnum = pxb[0];
|
|
break;
|
|
case 0x13:
|
|
s = "Intel 82454NX PXB#0, Bus#B";
|
|
*busnum = pxb[1];
|
|
break;
|
|
case 0x14:
|
|
s = "Intel 82454NX PXB#1, Bus#A";
|
|
*busnum = pxb[2];
|
|
break;
|
|
case 0x15:
|
|
s = "Intel 82454NX PXB#1, Bus#B";
|
|
*busnum = pxb[3];
|
|
break;
|
|
}
|
|
break;
|
|
|
|
/* SiS -- vendor 0x1039 */
|
|
case 0x04961039:
|
|
s = "SiS 85c496";
|
|
break;
|
|
case 0x04061039:
|
|
s = "SiS 85c501";
|
|
break;
|
|
case 0x06011039:
|
|
s = "SiS 85c601";
|
|
break;
|
|
case 0x55911039:
|
|
s = "SiS 5591 host to PCI bridge";
|
|
break;
|
|
case 0x00011039:
|
|
s = "SiS 5591 host to AGP bridge";
|
|
break;
|
|
|
|
/* VLSI -- vendor 0x1004 */
|
|
case 0x00051004:
|
|
s = "VLSI 82C592 Host to PCI bridge";
|
|
break;
|
|
|
|
/* XXX Here is MVP3, I got the datasheet but NO M/B to test it */
|
|
/* totally. Please let me know if anything wrong. -F */
|
|
/* XXX need info on the MVP3 -- any takers? */
|
|
case 0x05981106:
|
|
s = "VIA 82C598MVP (Apollo MVP3) host bridge";
|
|
break;
|
|
|
|
/* AcerLabs -- vendor 0x10b9 */
|
|
/* Funny : The datasheet told me vendor id is "10b8",sub-vendor */
|
|
/* id is '10b9" but the register always shows "10b9". -Foxfair */
|
|
case 0x154110b9:
|
|
s = "AcerLabs M1541 (Aladdin-V) PCI host bridge";
|
|
break;
|
|
|
|
/* OPTi -- vendor 0x1045 */
|
|
case 0xc8221045:
|
|
s = "OPTi 82C822 host to PCI Bridge";
|
|
break;
|
|
|
|
/* Ross (?) -- vendor 0x1166 */
|
|
case 0x00051166:
|
|
s = "Ross (?) host to PCI bridge";
|
|
/* just guessing the secondary bus register number ... */
|
|
*busnum = pci_cfgread(cfg, 0x45, 1);
|
|
break;
|
|
|
|
/* Integrated Micro Solutions -- vendor 0x10e0 */
|
|
case 0x884910e0:
|
|
s = "Integrated Micro Solutions VL Bridge";
|
|
break;
|
|
|
|
default:
|
|
if (class == PCIC_BRIDGE && subclass == PCIS_BRIDGE_HOST)
|
|
s = "Host to PCI bridge";
|
|
break;
|
|
}
|
|
|
|
return s;
|
|
}
|
|
|
|
/*
|
|
* Scan the first pci bus for host-pci bridges and add pcib instances
|
|
* to the nexus for each bridge.
|
|
*/
|
|
static void
|
|
nexus_pcib_identify(driver_t *driver, device_t parent)
|
|
{
|
|
pcicfgregs probe;
|
|
|
|
if (pci_cfgopen() == 0)
|
|
return;
|
|
probe.hose = 0;
|
|
probe.bus = 0;
|
|
for (probe.slot = 0; probe.slot <= PCI_SLOTMAX; probe.slot++) {
|
|
int pcifunchigh = 0;
|
|
for (probe.func = 0;
|
|
probe.func <= pcifunchigh;
|
|
probe.func++) {
|
|
/*
|
|
* Read the IDs and class from the device.
|
|
*/
|
|
u_int32_t id;
|
|
u_int8_t class, subclass, busnum;
|
|
device_t child;
|
|
const char *s;
|
|
|
|
id = pci_cfgread(&probe, PCIR_DEVVENDOR, 4);
|
|
if (id == -1)
|
|
continue;
|
|
class = pci_cfgread(&probe, PCIR_CLASS, 1);
|
|
subclass = pci_cfgread(&probe, PCIR_SUBCLASS, 1);
|
|
|
|
s = nexus_pcib_is_host_bridge(&probe, id,
|
|
class, subclass,
|
|
&busnum);
|
|
if (s) {
|
|
/*
|
|
* Add at priority 100 to make sure we
|
|
* go after any motherboard resources
|
|
*/
|
|
child = BUS_ADD_CHILD(parent, 100,
|
|
"pcib", busnum);
|
|
device_set_desc(child, s);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
nexus_pcib_probe(device_t dev)
|
|
{
|
|
if (pci_cfgopen() != 0) {
|
|
device_add_child(dev, "pci", device_get_unit(dev), 0);
|
|
return 0;
|
|
}
|
|
return ENXIO;
|
|
}
|
|
|
|
static device_method_t nexus_pcib_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, nexus_pcib_identify),
|
|
DEVMETHOD(device_probe, nexus_pcib_probe),
|
|
DEVMETHOD(device_attach, bus_generic_attach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
|
|
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t nexus_pcib_driver = {
|
|
"pcib",
|
|
nexus_pcib_methods,
|
|
1,
|
|
};
|
|
|
|
DRIVER_MODULE(pcib, nexus, nexus_pcib_driver, pcib_devclass, 0, 0);
|