6ea2fbe9be
cardbus bridge init routine for all cardbuses. This routine attempts to compensate for BIOSes that do not setup the cardbus bridge into legacy mode. Since this is becoming more common, and cardbus pci cards have appeared on the market, this makes sense. Do some TI113x specific initialization. This came in as part of the patch. Report TI1[1234]XX specific config registers protected by bootverbose. Minor code cleanup while I'm here. I've also removed the unused code present in the original patches, and cleaned it up slightly in places as well. The original patches supported more than one card, but these patches support just one. We should likely revisit this in the future. This makes the Compaq card that Walnut Creek CD purchased for me work in my bouncer box. This is a MFC candidate. However, I'd like to get some airtime on these patches on as many laptops as possible before doing the MFC. It does change things somewhat. In theory, apart from the minor TI tweaks, this shouldn't change anything if the bridge is in legacy mode already. Submitted by: sanpei@sanpei.org (MIHIRA Yoshiro)
151 lines
6.8 KiB
C
151 lines
6.8 KiB
C
/*
|
|
* Copyright (c) 1997 Ted Faber
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Absolutely no warranty of function or purpose is made by the author
|
|
* Ted Faber.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* PCI/CardBus Device IDs */
|
|
#define PCI_DEVICE_ID_PCIC_OZ6729 0x67291217ul
|
|
#define PCI_DEVICE_ID_PCIC_OZ6730 0x673A1217ul
|
|
#define PCI_DEVICE_ID_PCIC_CLPD6729 0x11001013ul
|
|
#define PCI_DEVICE_ID_PCIC_CLPD6832 0x11101013ul
|
|
#define PCI_DEVICE_ID_PCIC_TI1130 0xac12104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1131 0xac15104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1220 0xac17104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1221 0xac19104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1250 0xac16104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1251 0xac1d104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1251B 0xac1f104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1225 0xac1c104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1410 0xac50104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1420 0xac51104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1450 0xac1b104cul
|
|
#define PCI_DEVICE_ID_PCIC_TI1451 0xac52104cul
|
|
#define PCI_DEVICE_ID_TOSHIBA_TOPIC95 0x060a1179ul
|
|
#define PCI_DEVICE_ID_TOSHIBA_TOPIC97 0x060f1179ul
|
|
#define PCI_DEVICE_ID_RICOH_RL5C465 0x04651180ul
|
|
#define PCI_DEVICE_ID_RICOH_RL5C475 0x04751180ul
|
|
#define PCI_DEVICE_ID_RICOH_RL5C476 0x04761180ul
|
|
#define PCI_DEVICE_ID_RICOH_RL5C478 0x04781180ul
|
|
|
|
/* CL-PD6832 CardBus defines */
|
|
#define CLPD6832_IO_BASE0 0x002c
|
|
#define CLPD6832_IO_LIMIT0 0x0030
|
|
#define CLPD6832_IO_BASE1 0x0034
|
|
#define CLPD6832_IO_LIMIT1 0x0038
|
|
#define CLPD6832_BRIDGE_CONTROL 0x003c
|
|
#define CLPD6832_LEGACY_16BIT_IOADDR 0x0044
|
|
#define CLPD6832_SOCKET 0x004c
|
|
|
|
/* Configuration constants */
|
|
#define CLPD6832_BCR_MGMT_IRQ_ENA 0x08000000
|
|
#define CLPD6832_BCR_ISA_IRQ 0x00800000
|
|
#define CLPD6832_COMMAND_DEFAULTS 0x00000045
|
|
#define CLPD6832_NUM_REGS 2
|
|
|
|
/* End of CL-PD6832 defines */
|
|
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
|
#define TI113X_PCI_SYSTEM_CONTROL 0x80 /* System Control */
|
|
#define TI113X_PCI_RETRY_STATUS 0x90 /* Retry Status */
|
|
#define TI113X_PCI_CARD_CONTROL 0x91 /* Card Control */
|
|
#define TI113X_PCI_DEVICE_CONTROL 0x92 /* Device Control */
|
|
#define TI113X_PCI_BUFFER_CONTROL 0x93 /* Buffer Control */
|
|
#define TI113X_PCI_SOCKET_DMA0 0x94 /* Socket DMA Register 0 */
|
|
#define TI113X_PCI_SOCKET_DMA1 0x98 /* Socket DMA Register 1 */
|
|
|
|
/* Card control register (TI113X_SYSTEM_CONTROL == 0x80) */
|
|
#define TI113X_SYSCNTL_VCC_PROTECT 0x00200000u
|
|
#define TI113X_SYSCNTL_CLKRUN_SEL 0x00000080u
|
|
#define TI113X_SYSCNTL_PWRSAVINGS 0x00000040u
|
|
#define TI113X_SYSCNTL_KEEP_CLK 0x00000002u
|
|
#define TI113X_SYSCNTL_CLKRUN_ENA 0x00000001u
|
|
|
|
/* Card control register (TI113X_CARD_CONTROL == 0x91) */
|
|
#define TI113X_CARDCNTL_RING_ENA 0x80u
|
|
#define TI113X_CARDCNTL_ZOOM_VIDEO 0x40u
|
|
#define TI113X_CARDCNTL_PCI_IRQ_ENA 0x20u
|
|
#define TI113X_CARDCNTL_PCI_IREQ 0x10u
|
|
#define TI113X_CARDCNTL_PCI_CSC 0x08u
|
|
#define TI113X_CARDCNTL_MASK (TI113X_CARDCNTL_PCI_IRQ_ENA | TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
|
#define TI113X_FUNC0_VALID TI113X_CARDCNTL_MASK
|
|
#define TI113X_FUNC1_VALID (TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
|
/* Reserved bit 0x04u */
|
|
#define TI113X_CARDCNTL_SPKR_ENA 0x02u
|
|
#define TI113X_CARDCNTL_INT 0x01u
|
|
|
|
/* Device control register (TI113X_DEVICE_CONTROL == 0x92) */
|
|
#define TI113X_DEVCNTL_5V_SOCKET 0x40u
|
|
#define TI113X_DEVCNTL_3V_SOCKET 0x20u
|
|
#define TI113X_DEVCNTL_INTR_MASK 0x06u
|
|
#define TI113X_DEVCNTL_INTR_NONE 0x00u
|
|
#define TI113X_DEVCNTL_INTR_ISA 0x02u
|
|
#define TI113X_DEVCNTL_INTR_SERIAL 0x04u
|
|
/* TI112X specific code */
|
|
#define TI12XX_DEVCNTL_INTR_ALLSERIAL 0x06u
|
|
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
|
#define TI113X_ExCA_IO_OFFSET0 0x36 /* Offset of I/O window */
|
|
#define TI113X_ExCA_IO_OFFSET1 0x38 /* Offset of I/O window */
|
|
#define TI113X_ExCA_MEM_WINDOW_PAGE 0x3C /* Memory Window Page */
|
|
|
|
/* sanpei */
|
|
|
|
/* For Bridge Control register (CB_PCI_BRIDGE_CTRL) */
|
|
#define CB_BCR_CB_RESET 0x0040
|
|
#define CB_BCR_INT_EXCA 0x0080
|
|
/* PCI Configuration Registers (common) */
|
|
#define CB_PCI_VENDOR_ID 0x00 /* vendor ID */
|
|
#define CB_PCI_DEVICE_ID 0x02 /* device ID */
|
|
#define CB_PCI_COMMAND 0x04 /* PCI command */
|
|
#define CB_PCI_STATUS 0x06 /* PCI status */
|
|
#define CB_PCI_REVISION_ID 0x08 /* PCI revision ID */
|
|
#define CB_PCI_CLASS 0x09 /* PCI class code */
|
|
#define CB_PCI_CACHE_LINE_SIZE 0x0c /* Cache line size */
|
|
#define CB_PCI_LATENCY 0x0d /* PCI latency timer */
|
|
#define CB_PCI_HEADER_TYPE 0x0e /* PCI header type */
|
|
#define CB_PCI_BIST 0x0f /* Built-in self test */
|
|
#define CB_PCI_SOCKET_BASE 0x10 /* Socket/ExCA base address reg. */
|
|
#define CB_PCI_CB_STATUS 0x16 /* CardBus Status */
|
|
#define CB_PCI_PCI_BUS_NUM 0x18 /* PCI bus number */
|
|
#define CB_PCI_CB_BUS_NUM 0x19 /* CardBus bus number */
|
|
#define CB_PCI_CB_SUB_BUS_NUM 0x1A /* Subordinate CardBus bus number */
|
|
#define CB_PCI_CB_LATENCY 0x1A /* CardBus latency timer */
|
|
#define CB_PCI_MEMBASE0 0x1C /* Memory base register 0 */
|
|
#define CB_PCI_MEMLIMIT0 0x20 /* Memory limit register 0 */
|
|
#define CB_PCI_MEMBASE1 0x24 /* Memory base register 1 */
|
|
#define CB_PCI_MEMLIMIT1 0x28 /* Memory limit register 1 */
|
|
#define CB_PCI_IOBASE0 0x2C /* I/O base register 0 */
|
|
#define CB_PCI_IOLIMIT0 0x30 /* I/O limit register 0 */
|
|
#define CB_PCI_IOBASE1 0x34 /* I/O base register 1 */
|
|
#define CB_PCI_IOLIMIT1 0x38 /* I/O limit register 1 */
|
|
#define CB_PCI_INT_LINE 0x3C /* Interrupt Line */
|
|
#define CB_PCI_INT_PIN 0x3D /* Interrupt Pin */
|
|
#define CB_PCI_BRIDGE_CTRL 0x3E /* Bridge Control */
|
|
#define CB_PCI_SUBSYS_VENDOR_ID 0x40 /* Subsystem Vendor ID */
|
|
#define CB_PCI_SUBSYS_ID 0x42 /* Subsystem ID */
|
|
#define CB_PCI_LEGACY16_IOADDR 0x44 /* Legacy 16bit I/O address */
|