d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7716c3a1f9
freebsd-nq/sys/netinet/sctp.h
Randall Stewart 9f22f50039 - Found a problem in non-blocking sends. When 
sending, once the locks are all unlocked to
  do the copy's in, its possible that other
  events could then raise the number of bytes
  outstanding pushing it so not all the message
  would fit. This would then cause us to send
  only part of the message. This fix makes it
  so we keep a "reserved" amount that can be
  kept in mind when making calculations to send.
- rcv msg args with a NULL/NULL for to/tolen will return an error incorrectly
  for the 1-2-1 model.
- We were not doing 0 len return correctly and not setting cantrcv more
  correctly. Previouly we "fixed" this area by taking out the socantrcv
  since we then could not get the data out. The correct rix is to still
  flag the socket but alow a by-pass route to continue to read until
  all data is consumed.

MFC after:	1 week
2007-12-04 14:41:48 +00:00

542 lines
18 KiB
C
Raw Blame History

/*-
* Copyright (c) 2001-2007, by Cisco Systems, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $KAME: sctp.h,v 1.18 2005/03/06 16:04:16 itojun Exp $ */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#ifndef _NETINET_SCTP_H_
#define _NETINET_SCTP_H_
#include <sys/types.h>
/*
* SCTP protocol - RFC2960.
*/
struct sctphdr {
uint16_t src_port; /* source port */
uint16_t dest_port; /* destination port */
uint32_t v_tag; /* verification tag of packet */
uint32_t checksum; /* Adler32 C-Sum */
/* chunks follow... */
}
__attribute__((packed));
/*
* SCTP Chunks
*/
struct sctp_chunkhdr {
uint8_t chunk_type; /* chunk type */
uint8_t chunk_flags; /* chunk flags */
uint16_t chunk_length; /* chunk length */
/* optional params follow */
} __attribute__((packed));
/*
* SCTP chunk parameters
*/
struct sctp_paramhdr {
uint16_t param_type; /* parameter type */
uint16_t param_length; /* parameter length */
} __attribute__((packed));
/*
* user socket options: socket API defined
*/
/*
* read-write options
*/
#define SCTP_RTOINFO 0x00000001
#define SCTP_ASSOCINFO 0x00000002
#define SCTP_INITMSG 0x00000003
#define SCTP_NODELAY 0x00000004
#define SCTP_AUTOCLOSE 0x00000005
#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006
#define SCTP_PRIMARY_ADDR 0x00000007
#define SCTP_ADAPTATION_LAYER 0x00000008
/* same as above */
#define SCTP_ADAPTION_LAYER 0x00000008
#define SCTP_DISABLE_FRAGMENTS 0x00000009
#define SCTP_PEER_ADDR_PARAMS 0x0000000a
#define SCTP_DEFAULT_SEND_PARAM 0x0000000b
/* ancillary data/notification interest options */
#define SCTP_EVENTS 0x0000000c
/* Without this applied we will give V4 and V6 addresses on a V6 socket */
#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d
#define SCTP_MAXSEG 0x0000000e
#define SCTP_DELAYED_SACK 0x0000000f
#define SCTP_FRAGMENT_INTERLEAVE 0x00000010
#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011
/* authentication support */
#define SCTP_AUTH_CHUNK 0x00000012
#define SCTP_AUTH_KEY 0x00000013
#define SCTP_HMAC_IDENT 0x00000014
#define SCTP_AUTH_ACTIVE_KEY 0x00000015
#define SCTP_AUTH_DELETE_KEY 0x00000016
#define SCTP_USE_EXT_RCVINFO 0x00000017
#define SCTP_AUTO_ASCONF 0x00000018 /* rw */
#define SCTP_MAXBURST 0x00000019 /* rw */
#define SCTP_MAX_BURST 0x00000019 /* rw */
/* assoc level context */
#define SCTP_CONTEXT 0x0000001a /* rw */
/* explict EOR signalling */
#define SCTP_EXPLICIT_EOR 0x0000001b
/*
* read-only options
*/
#define SCTP_STATUS 0x00000100
#define SCTP_GET_PEER_ADDR_INFO 0x00000101
/* authentication support */
#define SCTP_PEER_AUTH_CHUNKS 0x00000102
#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103
#define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */
#define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */
/*
* user socket options: BSD implementation specific
*/
/*
* Blocking I/O is enabled on any TCP type socket by default. For the UDP
* model if this is turned on then the socket buffer is shared for send
* resources amongst all associations. The default for the UDP model is that
* is SS_NBIO is set. Which means all associations have a seperate send
* limit BUT they will NOT ever BLOCK instead you will get an error back
* EAGAIN if you try to send to much. If you want the blocking symantics you
* set this option at the cost of sharing one socket send buffer size amongst
* all associations. Peeled off sockets turn this option off and block. But
* since both TCP and peeled off sockets have only one assoc per socket this
* is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP
* model OR peeled off UDP model, but we do allow you to do so. You just use
* the normal syscall to toggle SS_NBIO the way you want.
*
* Blocking I/O is controled by the SS_NBIO flag on the socket state so_state
* field.
*/
/* these should probably go into sockets API */
#define SCTP_RESET_STREAMS 0x00001004 /* wo */
/* here on down are more implementation specific */
#define SCTP_SET_DEBUG_LEVEL 0x00001005
#define SCTP_CLR_STAT_LOG 0x00001007
/* CMT ON/OFF socket option */
#define SCTP_CMT_ON_OFF 0x00001200
#define SCTP_CMT_USE_DAC 0x00001201
/* JRS - Pluggable Congestion Control Socket option */
#define SCTP_PLUGGABLE_CC 0x00001202
/* read only */
#define SCTP_GET_SNDBUF_USE 0x00001101
#define SCTP_GET_STAT_LOG 0x00001103
#define SCTP_PCB_STATUS 0x00001104
#define SCTP_GET_NONCE_VALUES 0x00001105
/* Special hook for dynamically setting primary for all assoc's,
* this is a write only option that requires root privledge.
*/
#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001
/* VRF (virtual router feature) and multi-VRF support
* options. VRF's provide splits within a router
* that give the views of multiple routers. A
* standard host, without VRF support, is just
* a single VRF. If VRF's are supported then
* the transport must be VRF aware. This means
* that every socket call coming in must be directed
* within the endpoint to one of the VRF's it belongs
* to. The endpoint, before binding, may select
* the "default" VRF it is in by using a set socket
* option with SCTP_VRF_ID. This will also
* get propegated to the default VRF. Once the
* endpoint binds an address then it CANNOT add
* additional VRF's to become a Multi-VRF endpoint.
*
* Before BINDING additional VRF's can be added with
* the SCTP_ADD_VRF_ID call or deleted with
* SCTP_DEL_VRF_ID.
*
* Associations are ALWAYS contained inside a single
* VRF. They cannot reside in two (or more) VRF's. Incoming
* packets, assuming the router is VRF aware, can always
* tell us what VRF they arrived on. A host not supporting
* any VRF's will find that the packets always arrived on the
* single VRF that the host has.
*
*/
#define SCTP_VRF_ID 0x00003001
#define SCTP_ADD_VRF_ID 0x00003002
#define SCTP_GET_VRF_IDS 0x00003003
#define SCTP_GET_ASOC_VRF 0x00003004
#define SCTP_DEL_VRF_ID 0x00003005
/*
* If you enable packet logging you can get
* a poor mans ethereal output in binary
* form. Note this is a compile option to
* the kernel, SCTP_PACKET_LOGGING, and
* without it in your kernel you
* will get a EOPNOTSUPP
*/
#define SCTP_GET_PACKET_LOG 0x00004001
/*
* hidden implementation specific options these are NOT user visible (should
* move out of sctp.h)
*/
/* sctp_bindx() flags as hidden socket options */
#define SCTP_BINDX_ADD_ADDR 0x00008001
#define SCTP_BINDX_REM_ADDR 0x00008002
/* Hidden socket option that gets the addresses */
#define SCTP_GET_PEER_ADDRESSES 0x00008003
#define SCTP_GET_LOCAL_ADDRESSES 0x00008004
/* return the total count in bytes needed to hold all local addresses bound */
#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005
/* Return the total count in bytes needed to hold the remote address */
#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006
/* hidden option for connectx */
#define SCTP_CONNECT_X 0x00008007
/* hidden option for connectx_delayed, part of sendx */
#define SCTP_CONNECT_X_DELAYED 0x00008008
#define SCTP_CONNECT_X_COMPLETE 0x00008009
/* hidden socket option based sctp_peeloff */
#define SCTP_PEELOFF 0x0000800a
/* the real worker for sctp_getaddrlen() */
#define SCTP_GET_ADDR_LEN 0x0000800b
/* temporary workaround for Apple listen() issue, no args used */
#define SCTP_LISTEN_FIX 0x0000800c
/* Debug things that need to be purged */
#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00
/* JRS - Supported congestion control modules for pluggable
* congestion control
*/
/* Standard TCP Congestion Control */
#define SCTP_CC_RFC2581 0x00000000
/* High Speed TCP Congestion Control (Floyd) */
#define SCTP_CC_HSTCP 0x00000001
/* HTCP Congestion Control */
#define SCTP_CC_HTCP 0x00000002
/* fragment interleave constants
* setting must be one of these or
* EINVAL returned.
*/
#define SCTP_FRAG_LEVEL_0 0x00000000
#define SCTP_FRAG_LEVEL_1 0x00000001
#define SCTP_FRAG_LEVEL_2 0x00000002
/*
* user state values
*/
#define SCTP_CLOSED 0x0000
#define SCTP_BOUND 0x1000
#define SCTP_LISTEN 0x2000
#define SCTP_COOKIE_WAIT 0x0002
#define SCTP_COOKIE_ECHOED 0x0004
#define SCTP_ESTABLISHED 0x0008
#define SCTP_SHUTDOWN_SENT 0x0010
#define SCTP_SHUTDOWN_RECEIVED 0x0020
#define SCTP_SHUTDOWN_ACK_SENT 0x0040
#define SCTP_SHUTDOWN_PENDING 0x0080
/*
* SCTP operational error codes (user visible)
*/
#define SCTP_CAUSE_NO_ERROR 0x0000
#define SCTP_CAUSE_INVALID_STREAM 0x0001
#define SCTP_CAUSE_MISSING_PARAM 0x0002
#define SCTP_CAUSE_STALE_COOKIE 0x0003
#define SCTP_CAUSE_OUT_OF_RESC 0x0004
#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005
#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006
#define SCTP_CAUSE_INVALID_PARAM 0x0007
#define SCTP_CAUSE_UNRECOG_PARAM 0x0008
#define SCTP_CAUSE_NO_USER_DATA 0x0009
#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a
#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b
#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c
#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d
/* Error causes from RFC5061 */
#define SCTP_CAUSE_DELETING_LAST_ADDR 0xa0
#define SCTP_CAUSE_RESOURCE_SHORTAGE 0xa1
#define SCTP_CAUSE_DELETING_SRC_ADDR 0xa2
#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0xa3
#define SCTP_CAUSE_REQUEST_REFUSED 0xa4
/* Error causes from RFC4895 */
#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105
/*
* error cause parameters (user visisble)
*/
struct sctp_error_cause {
uint16_t code;
uint16_t length;
/* optional cause-specific info may follow */
} __attribute__((packed));
struct sctp_error_invalid_stream {
struct sctp_error_cause cause; /* code=SCTP_ERROR_INVALID_STRE
* AM */
uint16_t stream_id; /* stream id of the DATA in error */
uint16_t reserved;
} __attribute__((packed));
struct sctp_error_missing_param {
struct sctp_error_cause cause; /* code=SCTP_ERROR_MISSING_PARA
* M */
uint32_t num_missing_params; /* number of missing
* parameters */
/* uint16_t param_type's follow */
} __attribute__((packed));
struct sctp_error_stale_cookie {
struct sctp_error_cause cause; /* code=SCTP_ERROR_STALE_COOKIE
* */
uint32_t stale_time; /* time in usec of staleness */
} __attribute__((packed));
struct sctp_error_out_of_resource {
struct sctp_error_cause cause; /* code=SCTP_ERROR_OUT_OF_RESOU
* RCES */
} __attribute__((packed));
struct sctp_error_unresolv_addr {
struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRESOLVABLE
* _ADDR */
} __attribute__((packed));
struct sctp_error_unrecognized_chunk {
struct sctp_error_cause cause; /* code=SCTP_ERROR_UNRECOG_CHUN
* K */
struct sctp_chunkhdr ch; /* header from chunk in error */
} __attribute__((packed));
/*
* Main SCTP chunk types we place these here so natd and f/w's in user land
* can find them.
*/
/************0x00 series ***********/
#define SCTP_DATA 0x00
#define SCTP_INITIATION 0x01
#define SCTP_INITIATION_ACK 0x02
#define SCTP_SELECTIVE_ACK 0x03
#define SCTP_HEARTBEAT_REQUEST 0x04
#define SCTP_HEARTBEAT_ACK 0x05
#define SCTP_ABORT_ASSOCIATION 0x06
#define SCTP_SHUTDOWN 0x07
#define SCTP_SHUTDOWN_ACK 0x08
#define SCTP_OPERATION_ERROR 0x09
#define SCTP_COOKIE_ECHO 0x0a
#define SCTP_COOKIE_ACK 0x0b
#define SCTP_ECN_ECHO 0x0c
#define SCTP_ECN_CWR 0x0d
#define SCTP_SHUTDOWN_COMPLETE 0x0e
/* RFC4895 */
#define SCTP_AUTHENTICATION 0x0f
/************0x40 series ***********/
/************0x80 series ***********/
/* RFC5061 */
#define SCTP_ASCONF_ACK 0x80
/* draft-ietf-stewart-pktdrpsctp */
#define SCTP_PACKET_DROPPED 0x81
/* draft-ietf-stewart-strreset-xxx */
#define SCTP_STREAM_RESET 0x82
/* RFC4820 */
#define SCTP_PAD_CHUNK 0x84
/************0xc0 series ***********/
/* RFC3758 */
#define SCTP_FORWARD_CUM_TSN 0xc0
/* RFC5061 */
#define SCTP_ASCONF 0xc1
/* ABORT and SHUTDOWN COMPLETE FLAG */
#define SCTP_HAD_NO_TCB 0x01
/* Packet dropped flags */
#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB
#define SCTP_BADCRC 0x02
#define SCTP_PACKET_TRUNCATED 0x04
#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite
* time */
#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst
* in sat */
/* Data Chuck Specific Flags */
#define SCTP_DATA_FRAG_MASK 0x03
#define SCTP_DATA_MIDDLE_FRAG 0x00
#define SCTP_DATA_LAST_FRAG 0x01
#define SCTP_DATA_FIRST_FRAG 0x02
#define SCTP_DATA_NOT_FRAG 0x03
#define SCTP_DATA_UNORDERED 0x04
/* ECN Nonce: SACK Chunk Specific Flags */
#define SCTP_SACK_NONCE_SUM 0x01
/* CMT DAC algorithm SACK flag */
#define SCTP_SACK_CMT_DAC 0x80
/*
* PCB flags (in sctp_flags bitmask).
* Note the features and flags are meant
* for use by netstat.
*/
#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001
#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002
#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004
#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008
#define SCTP_PCB_FLAGS_UNBOUND 0x00000010
#define SCTP_PCB_FLAGS_LISTENING 0x00000020
#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000
#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000
#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000
/* TCP model support */
#define SCTP_PCB_FLAGS_CONNECTED 0x00200000
#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000
#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000
#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000
#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000
#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000
#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x08000000
#define SCTP_PCB_FLAGS_BLOCKING_IO 0x10000000
#define SCTP_PCB_FLAGS_SOCKET_GONE 0x20000000
#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x40000000
/* flags to copy to new PCB */
#define SCTP_PCB_COPY_FLAGS 0x0e000004
/*
* PCB Features (in sctp_features bitmask)
*/
#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x00000002
#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x00000004
#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x00000008
#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x00000010
#define SCTP_PCB_FLAGS_DO_ASCONF 0x00000020
#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x00000040
#define SCTP_PCB_FLAGS_ZERO_COPY_ACTIVE 0x00000080
/* socket options */
#define SCTP_PCB_FLAGS_NODELAY 0x00000100
#define SCTP_PCB_FLAGS_AUTOCLOSE 0x00000200
#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x00000400
#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x00000800
#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x00001000
#define SCTP_PCB_FLAGS_RECVPEERERR 0x00002000
#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x00004000
#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x00008000
#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x00010000
#define SCTP_PCB_FLAGS_PDAPIEVNT 0x00020000
#define SCTP_PCB_FLAGS_AUTHEVNT 0x00040000
#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x00080000
#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x00100000
#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x00400000
/*-
* mobility_features parameters (by micchie).Note
* these features are applied against the
* sctp_mobility_features flags.. not the sctp_features
* flags.
*/
#define SCTP_MOBILITY_BASE 0x00000001
#define SCTP_MOBILITY_FASTHANDOFF 0x00000002
#define SCTP_MOBILITY_PRIM_DELETED 0x00000004
#define SCTP_SMALLEST_PMTU 512 /* smallest pmtu allowed when disabling PMTU
* discovery */
#include <netinet/sctp_uio.h>
/* This dictates the size of the packet
* collection buffer. This only applies
* if SCTP_PACKET_LOGGING is enabled in
* your config.
*/
#define SCTP_PACKET_LOG_SIZE 65536
/* Maximum delays and such a user can set for options that
* take ms.
*/
#define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */
#define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */
#define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */
/* Types of logging/KTR tracing that can be enabled via the
* sysctl net.inet.sctp.sctp_logging. You must also enable
* SUBSYS tracing.
* Note that you must have the SCTP option in the kernel
* to enable these as well.
*/
#define SCTP_BLK_LOGGING_ENABLE 0x00000001
#define SCTP_CWND_MONITOR_ENABLE 0x00000002
#define SCTP_CWND_LOGGING_ENABLE 0x00000004
#define SCTP_EARLYFR_LOGGING_ENABLE 0x00000010
#define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020
#define SCTP_FR_LOGGING_ENABLE 0x00000040
#define SCTP_LOCK_LOGGING_ENABLE 0x00000080
#define SCTP_MAP_LOGGING_ENABLE 0x00000100
#define SCTP_MBCNT_LOGGING_ENABLE 0x00000200
#define SCTP_MBUF_LOGGING_ENABLE 0x00000400
#define SCTP_NAGLE_LOGGING_ENABLE 0x00000800
#define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000
#define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000
#define SCTP_SACK_LOGGING_ENABLE 0x00004000
#define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000
#define SCTP_SB_LOGGING_ENABLE 0x00010000
#define SCTP_STR_LOGGING_ENABLE 0x00020000
#define SCTP_WAKE_LOGGING_ENABLE 0x00040000
#define SCTP_LOG_MAXBURST_ENABLE 0x00080000
#define SCTP_LOG_RWND_ENABLE 0x00100000
#define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000
#define SCTP_LTRACE_CHUNK_ENABLE 0x00400000
#define SCTP_LTRACE_ERROR_ENABLE 0x00800000
#define SCTP_LAST_PACKET_TRACING 0x01000000
#define SCTP_THRESHOLD_LOGGING 0x02000000
#define SCTP_LOG_AT_SEND_2_SCTP 0x04000000
#define SCTP_LOG_AT_SEND_2_OUTQ 0x08000000
#endif /* !_NETINET_SCTP_H_ */
Reference in New Issue View Git Blame Copy Permalink