freebsd-nq/etc/rc.initdiskless
Poul-Henning Kamp edf28a672b When using this in non-NFSroot circumstances, mount -t nfs may
return empty.  Add a dummy element to prevent the alternate action
of the shell builtin "set"
2004-04-27 15:42:34 +00:00

324 lines
10 KiB
Bash

#!/bin/sh
#
# Copyright (c) 1999 Matt Dillon
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#
# $FreeBSD$
#
# REQUIRE: preseedrandom
# PROVIDE: initdiskless
# KEYWORD: FreeBSD nojail
# On entry to this script the entire system consists of a read-only root
# mounted via NFS. The kernel has run BOOTP and configured an interface
# (otherwise it would not have been able to mount the NFS root!)
#
# We use the contents of /conf to create and populate memory filesystems
# that are mounted on top of this root to implement the writable
# (and host-specific) parts of the root filesystem, and other volatile
# filesystems.
#
# The hierarchy in /conf has the form /conf/T/M/ where M are directories
# for which memory filesystems will be created and filled,
# and T is one of the "template" directories below:
#
# base universal base, typically a replica of the original root;
# default secondary universal base, typically overriding some
# of the files in the original root;
# ${ipba} where ${ipba} is the assigned broadcast IP address
# ${class} where ${class} is a list of directories supplied by
# bootp/dhcp through the T134 option.
# ${ipba} and ${class} are typicall used to configure features
# for group of diskless clients, or even individual features;
# ${ip} where ${ip} is the machine's assigned IP address, typically
# used to set host-specific features;
#
# Template directories are scanned in the order they are listed above,
# with each sucessive directory overriding (merged into) the previous one;
# non-existing directories are ignored.
#
# The existence of a directory /conf/T/M causes this script to create a
# memory filesystem mounted as /M on the client.
#
# Some files in /conf have special meaning, namely:
#
# Filename Action
# ----------------------------------------------------------------
# /conf/T/M/remount
# The contents of the file is a mount command. E.g. if
# /conf/1.2.3.4/foo/remount contains "mount -o ro /dev/ad0s3",
# then /dev/ad0s3 will be be mounted on /conf/1.2.3.4/foo/
#
# /conf/T/M/diskless_remount
# The contents of the file points to an NFS filesystem. E.g. if
# /conf/base/etc/diskless_remount contains "foo.com:/etc",
# then foo.com:/etc will be be mounted on /conf/base/etc/
# If the file contains a pathname starting with "/", then
# the root path is prepended to it; this allows relocation of
# the root filesystem withouth changing configuration files.
#
# /conf/T/M/md_size
# The contents of the file specifies the size of the memory
# filesystem to be created, in 512 byte blocks.
# The default size is 10240 blocks (5MB). E.g. if
# /conf/base/etc/md_size contains "30000" then a 15MB MFS
# will be created. In case of multiple entries for the same
# directory M, the last one in the scanning order is used.
# NOTE: If you only need to create a memory filesystem but not
# initialize it from a template, it is preferrable to specify
# it in fstab e.g. as "md /tmp mfs -s=30m,rw 0 0"
#
# /conf/T/SUBDIR.cpio.gz
# The file is cpio'd into /SUBDIR (and a memory filesystem is
# created for /SUBDIR if necessary). The presence of this file
# prevents the copy from /conf/T/SUBDIR/
#
# /conf/T/SUBDIR.remove
# The list of paths contained in the file are rm -rf'd
# relative to /SUBDIR.
#
# You will almost universally want to create the following files under /conf
#
# File Content
# ---------------------------- ------------------------------------------
# /conf/base/etc/md_size size of /etc filesystem
# /conf/base/diskless_remount "/etc"
# /conf/default/etc/rc.conf generic diskless config parameters
# /conf/default/etc/fstab generic diskless fstab e.g. like this
#
# foo:/root_part / nfs ro 0 0
# foo:/usr_part /usr nfs ro 0 0
# foo:/home_part /home nfs rw 0 0
# md /tmp mfs -s=30m,rw 0 0
# md /var mfs -s=30m,rw 0 0
# proc /proc procfs rw 0 0
#
# plus, possibly, overrides for password files etc.
#
# NOTE! /var, /tmp, and /dev will be typically created elsewhere, e.g.
# as entries in the fstab as above.
# Those filesystems should not be specified in /conf.
#
# (end of documentation, now get to the real code)
dlv=`/sbin/sysctl -n vfs.nfs.diskless_valid 2> /dev/null`
[ ${dlv:=0} -eq 0 ] && [ ! -f /etc/diskless ] && exit 0
# chkerr:
#
# Routine to check for error
#
# checks error code and drops into shell on failure.
# if shell exits, terminates script as well as /etc/rc.
#
chkerr() {
case $1 in
0)
;;
*)
echo "$2 failed: dropping into /bin/sh"
/bin/sh
# RESUME
;;
esac
}
# Create a generic memory disk
#
mount_md() {
/sbin/mdmfs -i 4096 -s $1 -M md $2
}
# Create the memory filesystem if it has not already been created
#
create_md() {
if [ "x`eval echo \\$md_created_$1`" = "x" ]; then
if [ "x`eval echo \\$md_size_$1`" = "x" ]; then
md_size=10240
else
md_size=`eval echo \\$md_size_$1`
fi
mount_md $md_size /$1
/bin/chmod 755 /$1
eval md_created_$1=created
fi
}
# DEBUGGING
#
# set -v
# Figure out our interface and IP.
#
bootp_ifc=""
bootp_ipa=""
bootp_ipbca=""
if [ ${dlv:=0} -ne 0 ] ; then
iflist=`ifconfig -l`
for i in ${iflist} ; do
set `ifconfig ${i}`
while [ $# -ge 1 ] ; do
if [ "${bootp_ifc}" = "" -a "$1" = "inet" ] ; then
bootp_ifc=${i} ; bootp_ipa=${2} ; shift
fi
if [ "${bootp_ipbca}" = "" -a "$1" = "broadcast" ] ; then
bootp_ipbca=$2; shift
fi
shift
done
if [ "${bootp_ifc}" != "" ] ; then
break
fi
done
# Insert the directories passed with the T134 bootp cookie
# in the list of paths used for templates.
i="`/sbin/sysctl -n kern.bootp_cookie`"
[ "${i}" != "" ] && bootp_ipbca="${bootp_ipbca} ${i}"
echo "Interface ${bootp_ifc} IP-Address ${bootp_ipa} Broadcast ${bootp_ipbca}"
fi
# Figure out our NFS root path
#
# The 'x' is there in case the list is empty.
set x `mount -t nfs`
while [ $# -ge 1 ] ; do
if [ "$2" = "on" -a "$3" = "/" ]; then
nfsroot="$1"
break
fi
shift
done
# The list of directories with template files
templates="base default ${bootp_ipbca} ${bootp_ipa}"
# The list of filesystems to umount after the copy
to_umount=""
# If /conf/diskless_remount exists, remount all of /conf. This allows
# multiple roots to share the same conf files.
if [ -d /conf -a -f /conf/diskless_remount ]; then
nfspt=`/bin/cat /conf/diskless_remount`
if [ `expr "$nfspt" : '\(.\)'` = "/" ]; then
nfspt="${nfsroot}${nfspt}"
fi
mount_nfs $nfspt /conf
chkerr $? "mount_nfs $nfspt /conf"
to_umount="/conf"
fi
# Resolve templates in /conf/base, /conf/default, /conf/${bootp_ipbca},
# and /conf/${bootp_ipa}. For each subdirectory found within these
# directories:
#
# - calculate memory filesystem sizes. If the subdirectory (prior to
# NFS remounting) contains the file 'md_size', the contents specified
# in 512 byte sectors will be used to size the memory filesystem. Otherwise
# 8192 sectors (4MB) is used.
#
# - handle NFS remounts. If the subdirectory contains the file
# diskless_remount, the contents of the file is NFS mounted over
# the directory. For example /conf/base/etc/diskless_remount
# might contain 'myserver:/etc'. NFS remounts allow you to avoid
# having to dup your system directories in /conf. Your server must
# be sure to export those filesystems -alldirs, however.
# If the diskless_remount file contains a string beginning with a
# '/' it is assumed that the local nfsroot should be prepended to
# it before attemping to the remount. This allows the root to be
# relocated without needing to change the remount files.
#
for i in ${templates} ; do
for j in /conf/$i/* ; do
# memory filesystem size specification
#
subdir=${j##*/}
if [ -d $j -a -f $j/md_size ]; then
eval md_size_$subdir=`cat $j/md_size`
fi
# remount
#
if [ -d $j -a -f $j/remount ]; then
nfspt=`/bin/cat $j/remount`
$nfspt $j
chkerr $? "$nfspt $j"
to_umount="${to_umount} $j" # XXX hope it is really a mount!
fi
# NFS remount
#
if [ -d $j -a -f $j/diskless_remount ]; then
nfspt=`/bin/cat $j/diskless_remount`
if [ `expr "$nfspt" : '\(.\)'` = "/" ]; then
nfspt="${nfsroot}${nfspt}"
fi
mount_nfs $nfspt $j
chkerr $? "mount_nfs $nfspt $j"
to_umount="${to_umount} $j"
fi
done
done
# - Create all required MFS filesystems and populate them from
# our templates. Support both a direct template and a dir.cpio.gz
# archive. Support dir.remove files containing a list of relative
# paths to remove.
#
# The dir.cpio.gz form is there to make the copy process more efficient,
# so if the cpio archive is present, it prevents the files from dir/
# from being copied.
for i in ${templates} ; do
for j in /conf/$i/* ; do
subdir=${j##*/}
if [ -d $j -a ! -f $j.cpio.gz ]; then
create_md $subdir
cp -Rp $j/* /$subdir
fi
done
for j in /conf/$i/*.cpio.gz ; do
subdir=${j%*.cpio.gz}
subdir=${subdir##*/}
if [ -f $j ]; then
create_md $subdir
echo "Loading /$subdir from cpio archive $j"
(cd / ; /stand/gzip -d < $j | /stand/cpio --extract -d )
fi
done
for j in /conf/$i/*.remove ; do
subdir=${j%*.remove}
subdir=${subdir##*/}
if [ -f $j ]; then
# doubly sure it is a memory disk before rm -rf'ing
create_md $subdir
(cd /$subdir; rm -rf `/bin/cat $j`)
fi
done
done
# umount partitions used to fill the memory filesystems
[ -n "${to_umount}" ] && umount $to_umount