d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7843bd031a
freebsd-nq/sys/dev/wtap/if_wtap.c
Monthadar Al Jaberi 398228fc82 wtap should not set the IEEE80211_F_DATAPAD flag; 
Approved by: adrian (mentor)
2012-12-18 16:15:20 +00:00

923 lines
22 KiB
C
Raw Blame History

/*-
* Copyright (c) 2010-2011 Monthadar Al Jaberi, TerraNet AB
* All rights reserved.
*
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD$
*/
#include "if_wtapvar.h"
#include <sys/uio.h> /* uio struct */
#include <sys/jail.h>
#include <net/if_var.h>
#include <net/vnet.h>
#include <net80211/ieee80211_ratectl.h>
#include "if_medium.h"
/*
* This _requires_ vimage to be useful.
*/
#ifndef VIMAGE
#error if_wtap requires VIMAGE.
#endif /* VIMAGE */
/* device for IOCTL and read/write for debuggin purposes */
/* Function prototypes */
static d_open_t wtap_node_open;
static d_close_t wtap_node_close;
static d_write_t wtap_node_write;
static d_ioctl_t wtap_node_ioctl;
static struct cdevsw wtap_cdevsw = {
.d_version = D_VERSION,
.d_flags = 0,
.d_open = wtap_node_open,
.d_close = wtap_node_close,
.d_write = wtap_node_write,
.d_ioctl = wtap_node_ioctl,
.d_name = "wtapnode",
};
static int
wtap_node_open(struct cdev *dev, int oflags, int devtype, struct thread *p)
{
int err = 0;
uprintf("Opened device \"echo\" successfully.\n");
return(err);
}
static int
wtap_node_close(struct cdev *dev, int fflag, int devtype, struct thread *p)
{
uprintf("Closing device \"echo.\"\n");
return(0);
}
static int
wtap_node_write(struct cdev *dev, struct uio *uio, int ioflag)
{
int err = 0;
struct mbuf *m;
struct ifnet *ifp;
struct wtap_softc *sc;
uint8_t buf[1024];
int buf_len;
uprintf("write device %s \"echo.\"\n", devtoname(dev));
buf_len = MIN(uio->uio_iov->iov_len, 1024);
err = copyin(uio->uio_iov->iov_base, buf, buf_len);
if (err != 0) {
uprintf("Write failed: bad address!\n");
return (err);
}
MGETHDR(m, M_NOWAIT, MT_DATA);
m_copyback(m, 0, buf_len, buf);
CURVNET_SET(TD_TO_VNET(curthread));
IFNET_RLOCK_NOSLEEP();
TAILQ_FOREACH(ifp, &V_ifnet, if_link) {
printf("ifp->if_xname = %s\n", ifp->if_xname);
if(strcmp(devtoname(dev), ifp->if_xname) == 0){
printf("found match, correspoding wtap = %s\n",
ifp->if_xname);
sc = (struct wtap_softc *)ifp->if_softc;
printf("wtap id = %d\n", sc->id);
wtap_inject(sc, m);
}
}
IFNET_RUNLOCK_NOSLEEP();
CURVNET_RESTORE();
return(err);
}
int
wtap_node_ioctl(struct cdev *dev, u_long cmd, caddr_t data,
int fflag, struct thread *td)
{
int error = 0;
switch(cmd) {
default:
DWTAP_PRINTF("Unkown WTAP IOCTL\n");
error = EINVAL;
}
return error;
}
static int wtap_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_bpf_params *params);
static int
wtap_medium_enqueue(struct wtap_vap *avp, struct mbuf *m)
{
return medium_transmit(avp->av_md, avp->id, m);
}
static int
wtap_media_change(struct ifnet *ifp)
{
DWTAP_PRINTF("%s\n", __func__);
int error = ieee80211_media_change(ifp);
/* NB: only the fixed rate can change and that doesn't need a reset */
return (error == ENETRESET ? 0 : error);
}
/*
* Intercept management frames to collect beacon rssi data
* and to do ibss merges.
*/
static void
wtap_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m,
int subtype, int rssi, int nf)
{
struct ieee80211vap *vap = ni->ni_vap;
#if 0
DWTAP_PRINTF("[%d] %s\n", myath_id(ni), __func__);
#endif
WTAP_VAP(vap)->av_recv_mgmt(ni, m, subtype, rssi, nf);
}
static int
wtap_reset_vap(struct ieee80211vap *vap, u_long cmd)
{
DWTAP_PRINTF("%s\n", __func__);
return 0;
}
static void
wtap_beacon_update(struct ieee80211vap *vap, int item)
{
struct ieee80211_beacon_offsets *bo = &WTAP_VAP(vap)->av_boff;
DWTAP_PRINTF("%s\n", __func__);
setbit(bo->bo_flags, item);
}
/*
* Allocate and setup an initial beacon frame.
*/
static int
wtap_beacon_alloc(struct wtap_softc *sc, struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct wtap_vap *avp = WTAP_VAP(vap);
DWTAP_PRINTF("[%s] %s\n", ether_sprintf(ni->ni_macaddr), __func__);
/*
* NB: the beacon data buffer must be 32-bit aligned;
* we assume the mbuf routines will return us something
* with this alignment (perhaps should assert).
*/
avp->beacon = ieee80211_beacon_alloc(ni, &avp->av_boff);
if (avp->beacon == NULL) {
printf("%s: cannot get mbuf\n", __func__);
return ENOMEM;
}
callout_init(&avp->av_swba, 0);
avp->bf_node = ieee80211_ref_node(ni);
return 0;
}
static void
wtap_beacon_config(struct wtap_softc *sc, struct ieee80211vap *vap)
{
DWTAP_PRINTF("%s\n", __func__);
}
static void
wtap_beacon_intrp(void *arg)
{
struct wtap_vap *avp = arg;
struct ieee80211vap *vap = arg;
struct mbuf *m;
if (vap->iv_state < IEEE80211_S_RUN) {
DWTAP_PRINTF("Skip beacon, not running, state %d", vap->iv_state);
return ;
}
DWTAP_PRINTF("[%d] beacon intrp\n", avp->id); //burst mode
/*
* Update dynamic beacon contents. If this returns
* non-zero then we need to remap the memory because
* the beacon frame changed size (probably because
* of the TIM bitmap).
*/
m = m_dup(avp->beacon, M_NOWAIT);
if (ieee80211_beacon_update(avp->bf_node, &avp->av_boff, m, 0)) {
printf("%s, need to remap the memory because the beacon frame"
" changed size.\n",__func__);
}
if (ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_tx(vap, m);
#if 0
medium_transmit(avp->av_md, avp->id, m);
#endif
wtap_medium_enqueue(avp, m);
callout_schedule(&avp->av_swba, avp->av_bcinterval);
}
static int
wtap_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct ieee80211com *ic = vap->iv_ic;
struct wtap_softc *sc = ic->ic_ifp->if_softc;
struct wtap_vap *avp = WTAP_VAP(vap);
struct ieee80211_node *ni = NULL;
int error;
DWTAP_PRINTF("%s\n", __func__);
ni = ieee80211_ref_node(vap->iv_bss);
/*
* Invoke the parent method to do net80211 work.
*/
error = avp->av_newstate(vap, nstate, arg);
if (error != 0)
goto bad;
if (nstate == IEEE80211_S_RUN) {
/* NB: collect bss node again, it may have changed */
ieee80211_free_node(ni);
ni = ieee80211_ref_node(vap->iv_bss);
switch (vap->iv_opmode) {
case IEEE80211_M_MBSS:
error = wtap_beacon_alloc(sc, ni);
if (error != 0)
goto bad;
wtap_beacon_config(sc, vap);
callout_reset(&avp->av_swba, avp->av_bcinterval,
wtap_beacon_intrp, vap);
break;
default:
goto bad;
}
} else if (nstate == IEEE80211_S_INIT) {
callout_stop(&avp->av_swba);
}
ieee80211_free_node(ni);
return 0;
bad:
printf("%s: bad\n", __func__);
ieee80211_free_node(ni);
return error;
}
static void
wtap_bmiss(struct ieee80211vap *vap)
{
struct wtap_vap *avp = (struct wtap_vap *)vap;
DWTAP_PRINTF("%s\n", __func__);
avp->av_bmiss(vap);
}
static struct ieee80211vap *
wtap_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ],
int unit, enum ieee80211_opmode opmode, int flags,
const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct wtap_softc *sc = ic->ic_ifp->if_softc;
struct ieee80211vap *vap;
struct wtap_vap *avp;
int error;
struct ieee80211_node *ni;
DWTAP_PRINTF("%s\n", __func__);
avp = malloc(sizeof(struct wtap_vap), M_80211_VAP, M_NOWAIT | M_ZERO);
if (avp == NULL)
return (NULL);
avp->id = sc->id;
avp->av_md = sc->sc_md;
avp->av_bcinterval = msecs_to_ticks(BEACON_INTRERVAL + 100*sc->id);
vap = (struct ieee80211vap *) avp;
error = ieee80211_vap_setup(ic, vap, name, unit, IEEE80211_M_MBSS,
flags | IEEE80211_CLONE_NOBEACONS, bssid, mac);
if (error) {
free(avp, M_80211_VAP);
return (NULL);
}
/* override various methods */
avp->av_recv_mgmt = vap->iv_recv_mgmt;
vap->iv_recv_mgmt = wtap_recv_mgmt;
vap->iv_reset = wtap_reset_vap;
vap->iv_update_beacon = wtap_beacon_update;
avp->av_newstate = vap->iv_newstate;
vap->iv_newstate = wtap_newstate;
avp->av_bmiss = vap->iv_bmiss;
vap->iv_bmiss = wtap_bmiss;
/* complete setup */
ieee80211_vap_attach(vap, wtap_media_change, ieee80211_media_status);
avp->av_dev = make_dev(&wtap_cdevsw, 0, UID_ROOT, GID_WHEEL, 0600,
"%s", (const char *)ic->ic_ifp->if_xname);
/* TODO this is a hack to force it to choose the rate we want */
ni = ieee80211_ref_node(vap->iv_bss);
ni->ni_txrate = 130;
ieee80211_free_node(ni);
return vap;
}
static void
wtap_vap_delete(struct ieee80211vap *vap)
{
struct wtap_vap *avp = WTAP_VAP(vap);
DWTAP_PRINTF("%s\n", __func__);
destroy_dev(avp->av_dev);
callout_stop(&avp->av_swba);
ieee80211_vap_detach(vap);
free((struct wtap_vap*) vap, M_80211_VAP);
}
/* NB: This function is not used.
* I had the problem of the queue
* being empty all the time.
* Maybe I am setting the queue wrong?
*/
static void
wtap_start(struct ifnet *ifp)
{
struct ieee80211com *ic = ifp->if_l2com;
struct ifnet *icifp = ic->ic_ifp;
struct wtap_softc *sc = icifp->if_softc;
struct ieee80211_node *ni;
struct mbuf *m;
DWTAP_PRINTF("my_start, with id=%u\n", sc->id);
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0 || sc->up == 0)
return;
for (;;) {
if(IFQ_IS_EMPTY(&ifp->if_snd)){
printf("queue empty, just trying to see "
"if the other queue is empty\n");
#if 0
printf("queue for id=1, %u\n",
IFQ_IS_EMPTY(&global_mscs[1]->ifp->if_snd));
printf("queue for id=0, %u\n",
IFQ_IS_EMPTY(&global_mscs[0]->ifp->if_snd));
#endif
break;
}
IFQ_DEQUEUE(&ifp->if_snd, m);
if (m == NULL) {
printf("error dequeueing from ifp->snd\n");
break;
}
ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
/*
* Check for fragmentation. If this frame
* has been broken up verify we have enough
* buffers to send all the fragments so all
* go out or none...
*/
#if 0
STAILQ_INIT(&frags);
#endif
if ((m->m_flags & M_FRAG)){
printf("dont support frags\n");
ifp->if_oerrors++;
return;
}
ifp->if_opackets++;
if(wtap_raw_xmit(ni, m, NULL) < 0){
printf("error raw_xmiting\n");
ifp->if_oerrors++;
return;
}
}
}
static int
wtap_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
#if 0
DWTAP_PRINTF("%s\n", __func__);
uprintf("%s, command %lu\n", __func__, cmd);
#endif
#define IS_RUNNING(ifp) \
((ifp->if_flags & IFF_UP) && (ifp->if_drv_flags & IFF_DRV_RUNNING))
struct ieee80211com *ic = ifp->if_l2com;
struct wtap_softc *sc = ifp->if_softc;
struct ifreq *ifr = (struct ifreq *)data;
int error = 0;
switch (cmd) {
case SIOCSIFFLAGS:
//printf("%s: %s\n", __func__, "SIOCSIFFLAGS");
if (IS_RUNNING(ifp)) {
DWTAP_PRINTF("running\n");
#if 0
/*
* To avoid rescanning another access point,
* do not call ath_init() here. Instead,
* only reflect promisc mode settings.
*/
//ath_mode_init(sc);
#endif
} else if (ifp->if_flags & IFF_UP) {
DWTAP_PRINTF("up\n");
sc->up = 1;
#if 0
/*
* Beware of being called during attach/detach
* to reset promiscuous mode. In that case we
* will still be marked UP but not RUNNING.
* However trying to re-init the interface
* is the wrong thing to do as we've already
* torn down much of our state. There's
* probably a better way to deal with this.
*/
//if (!sc->sc_invalid)
// ath_init(sc); /* XXX lose error */
#endif
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ieee80211_start_all(ic);
} else {
DWTAP_PRINTF("stoping\n");
#if 0
ath_stop_locked(ifp);
#ifdef notyet
/* XXX must wakeup in places like ath_vap_delete */
if (!sc->sc_invalid)
ath_hal_setpower(sc->sc_ah, HAL_PM_FULL_SLEEP);
#endif
#endif
}
break;
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
#if 0
DWTAP_PRINTF("%s: %s\n", __func__, "SIOCGIFMEDIA|SIOCSIFMEDIA");
#endif
error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
break;
case SIOCGIFADDR:
#if 0
DWTAP_PRINTF("%s: %s\n", __func__, "SIOCGIFADDR");
#endif
error = ether_ioctl(ifp, cmd, data);
break;
default:
DWTAP_PRINTF("%s: %s [%lu]\n", __func__, "EINVAL", cmd);
error = EINVAL;
break;
}
return error;
#undef IS_RUNNING
}
static void
wtap_init(void *arg){
DWTAP_PRINTF("%s\n", __func__);
}
static void
wtap_scan_start(struct ieee80211com *ic)
{
#if 0
DWTAP_PRINTF("%s\n", __func__);
#endif
}
static void
wtap_scan_end(struct ieee80211com *ic)
{
#if 0
DWTAP_PRINTF("%s\n", __func__);
#endif
}
static void
wtap_set_channel(struct ieee80211com *ic)
{
#if 0
DWTAP_PRINTF("%s\n", __func__);
#endif
}
static int
wtap_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_bpf_params *params)
{
#if 0
DWTAP_PRINTF("%s, %p\n", __func__, m);
#endif
struct ieee80211vap *vap = ni->ni_vap;
struct wtap_vap *avp = WTAP_VAP(vap);
if (ieee80211_radiotap_active_vap(vap)) {
ieee80211_radiotap_tx(vap, m);
}
if (m->m_flags & M_TXCB)
ieee80211_process_callback(ni, m, 0);
ieee80211_free_node(ni);
return wtap_medium_enqueue(avp, m);
}
void
wtap_inject(struct wtap_softc *sc, struct mbuf *m)
{
struct wtap_buf *bf = (struct wtap_buf *)malloc(sizeof(struct wtap_buf),
M_WTAP_RXBUF, M_NOWAIT | M_ZERO);
KASSERT(bf != NULL, ("could not allocated a new wtap_buf\n"));
bf->m = m;
mtx_lock(&sc->sc_mtx);
STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list);
taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask);
mtx_unlock(&sc->sc_mtx);
}
void
wtap_rx_deliver(struct wtap_softc *sc, struct mbuf *m)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct ieee80211_node *ni;
int type;
#if 0
DWTAP_PRINTF("%s\n", __func__);
#endif
DWTAP_PRINTF("[%d] receiving m=%p\n", sc->id, m);
if (m == NULL) { /* NB: shouldn't happen */
if_printf(ifp, "%s: no mbuf!\n", __func__);
}
ifp->if_ipackets++;
ieee80211_dump_pkt(ic, mtod(m, caddr_t), 0,0,0);
/*
* Locate the node for sender, track state, and then
* pass the (referenced) node up to the 802.11 layer
* for its use.
*/
ni = ieee80211_find_rxnode_withkey(ic,
mtod(m, const struct ieee80211_frame_min *),IEEE80211_KEYIX_NONE);
if (ni != NULL) {
/*
* Sending station is known, dispatch directly.
*/
type = ieee80211_input(ni, m, 1<<7, 10);
ieee80211_free_node(ni);
} else {
type = ieee80211_input_all(ic, m, 1<<7, 10);
}
}
static void
wtap_rx_proc(void *arg, int npending)
{
struct wtap_softc *sc = (struct wtap_softc *)arg;
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct mbuf *m;
struct ieee80211_node *ni;
int type;
struct wtap_buf *bf;
#if 0
DWTAP_PRINTF("%s\n", __func__);
#endif
for(;;) {
mtx_lock(&sc->sc_mtx);
bf = STAILQ_FIRST(&sc->sc_rxbuf);
if (bf == NULL) {
mtx_unlock(&sc->sc_mtx);
return;
}
STAILQ_REMOVE_HEAD(&sc->sc_rxbuf, bf_list);
mtx_unlock(&sc->sc_mtx);
KASSERT(bf != NULL, ("wtap_buf is NULL\n"));
m = bf->m;
DWTAP_PRINTF("[%d] receiving m=%p\n", sc->id, bf->m);
if (m == NULL) { /* NB: shouldn't happen */
if_printf(ifp, "%s: no mbuf!\n", __func__);
free(bf, M_WTAP_RXBUF);
return;
}
ifp->if_ipackets++;
#if 0
ieee80211_dump_pkt(ic, mtod(m, caddr_t), 0,0,0);
#endif
/*
* Locate the node for sender, track state, and then
* pass the (referenced) node up to the 802.11 layer
* for its use.
*/
ni = ieee80211_find_rxnode_withkey(ic,
mtod(m, const struct ieee80211_frame_min *),
IEEE80211_KEYIX_NONE);
if (ni != NULL) {
/*
* Sending station is known, dispatch directly.
*/
#if 0
ieee80211_radiotap_rx(ni->ni_vap, m);
#endif
type = ieee80211_input(ni, m, 1<<7, 10);
ieee80211_free_node(ni);
} else {
#if 0
ieee80211_radiotap_rx_all(ic, m);
#endif
type = ieee80211_input_all(ic, m, 1<<7, 10);
}
/* The mbufs are freed by the Net80211 stack */
free(bf, M_WTAP_RXBUF);
}
}
static void
wtap_newassoc(struct ieee80211_node *ni, int isnew)
{
DWTAP_PRINTF("%s\n", __func__);
}
/*
* Callback from the 802.11 layer to update WME parameters.
*/
static int
wtap_wme_update(struct ieee80211com *ic)
{
DWTAP_PRINTF("%s\n", __func__);
return 0;
}
static void
wtap_update_mcast(struct ifnet *ifp)
{
DWTAP_PRINTF("%s\n", __func__);
}
static void
wtap_update_promisc(struct ifnet *ifp)
{
DWTAP_PRINTF("%s\n", __func__);
}
static int
wtap_if_transmit(struct ifnet *ifp, struct mbuf *m)
{
struct ieee80211_node *ni =
(struct ieee80211_node *) m->m_pkthdr.rcvif;
struct ieee80211vap *vap = ni->ni_vap;
struct wtap_vap *avp = WTAP_VAP(vap);
if(ni == NULL){
printf("m->m_pkthdr.rcvif is NULL we cant radiotap_tx\n");
}else{
if (ieee80211_radiotap_active_vap(vap))
ieee80211_radiotap_tx(vap, m);
}
if (m->m_flags & M_TXCB)
ieee80211_process_callback(ni, m, 0);
ieee80211_free_node(ni);
return wtap_medium_enqueue(avp, m);
}
static struct ieee80211_node *
wtap_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct ieee80211_node *ni;
DWTAP_PRINTF("%s\n", __func__);
ni = malloc(sizeof(struct ieee80211_node), M_80211_NODE,
M_NOWAIT|M_ZERO);
ni->ni_txrate = 130;
return ni;
}
static void
wtap_node_free(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct wtap_softc *sc = ic->ic_ifp->if_softc;
DWTAP_PRINTF("%s\n", __func__);
sc->sc_node_free(ni);
}
int32_t
wtap_attach(struct wtap_softc *sc, const uint8_t *macaddr)
{
struct ifnet *ifp;
struct ieee80211com *ic;
char wtap_name[] = {'w','T','a','p',sc->id,
'_','t','a','s','k','q','\0'};
DWTAP_PRINTF("%s\n", __func__);
ifp = if_alloc(IFT_IEEE80211);
if (ifp == NULL) {
printf("can not if_alloc()\n");
return -1;
}
ic = ifp->if_l2com;
if_initname(ifp, "wtap", sc->id);
sc->sc_ifp = ifp;
sc->up = 0;
STAILQ_INIT(&sc->sc_rxbuf);
sc->sc_tq = taskqueue_create(wtap_name, M_NOWAIT | M_ZERO,
taskqueue_thread_enqueue, &sc->sc_tq);
taskqueue_start_threads(&sc->sc_tq, 1, PI_SOFT, "%s taskQ",
ifp->if_xname);
TASK_INIT(&sc->sc_rxtask, 0, wtap_rx_proc, sc);
ifp->if_softc = sc;
ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST;
ifp->if_start = wtap_start;
ifp->if_ioctl = wtap_ioctl;
ifp->if_init = wtap_init;
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
IFQ_SET_READY(&ifp->if_snd);
ic->ic_ifp = ifp;
ic->ic_phytype = IEEE80211_T_DS;
ic->ic_opmode = IEEE80211_M_MBSS;
ic->ic_caps = IEEE80211_C_MBSS;
ic->ic_max_keyix = 128; /* A value read from Atheros ATH_KEYMAX */
ic->ic_regdomain.regdomain = SKU_ETSI;
ic->ic_regdomain.country = CTRY_SWEDEN;
ic->ic_regdomain.location = 1; /* Indoors */
ic->ic_regdomain.isocc[0] = 'S';
ic->ic_regdomain.isocc[1] = 'E';
ic->ic_nchans = 1;
ic->ic_channels[0].ic_flags = IEEE80211_CHAN_B;
ic->ic_channels[0].ic_freq = 2412;
ieee80211_ifattach(ic, macaddr);
#if 0
/* new prototype hook-ups */
msc->if_input = ifp->if_input;
ifp->if_input = myath_if_input;
msc->if_output = ifp->if_output;
ifp->if_output = myath_if_output;
#endif
sc->if_transmit = ifp->if_transmit;
ifp->if_transmit = wtap_if_transmit;
/* override default methods */
ic->ic_newassoc = wtap_newassoc;
#if 0
ic->ic_updateslot = myath_updateslot;
#endif
ic->ic_wme.wme_update = wtap_wme_update;
ic->ic_vap_create = wtap_vap_create;
ic->ic_vap_delete = wtap_vap_delete;
ic->ic_raw_xmit = wtap_raw_xmit;
ic->ic_update_mcast = wtap_update_mcast;
ic->ic_update_promisc = wtap_update_promisc;
sc->sc_node_alloc = ic->ic_node_alloc;
ic->ic_node_alloc = wtap_node_alloc;
sc->sc_node_free = ic->ic_node_free;
ic->ic_node_free = wtap_node_free;
#if 0
ic->ic_node_getsignal = myath_node_getsignal;
#endif
ic->ic_scan_start = wtap_scan_start;
ic->ic_scan_end = wtap_scan_end;
ic->ic_set_channel = wtap_set_channel;
ieee80211_radiotap_attach(ic,
&sc->sc_tx_th.wt_ihdr, sizeof(sc->sc_tx_th),
WTAP_TX_RADIOTAP_PRESENT,
&sc->sc_rx_th.wr_ihdr, sizeof(sc->sc_rx_th),
WTAP_RX_RADIOTAP_PRESENT);
/* Work here, we must find a way to populate the rate table */
#if 0
if(ic->ic_rt == NULL){
printf("no table for ic_curchan\n");
ic->ic_rt = ieee80211_get_ratetable(&ic->ic_channels[0]);
}
printf("ic->ic_rt =%p\n", ic->ic_rt);
printf("rate count %d\n", ic->ic_rt->rateCount);
uint8_t code = ic->ic_rt->info[0].dot11Rate;
uint8_t cix = ic->ic_rt->info[0].ctlRateIndex;
uint8_t ctl_rate = ic->ic_rt->info[cix].dot11Rate;
printf("code=%d, cix=%d, ctl_rate=%d\n", code, cix, ctl_rate);
uint8_t rix0 = ic->ic_rt->rateCodeToIndex[130];
uint8_t rix1 = ic->ic_rt->rateCodeToIndex[132];
uint8_t rix2 = ic->ic_rt->rateCodeToIndex[139];
uint8_t rix3 = ic->ic_rt->rateCodeToIndex[150];
printf("rix0 %u,rix1 %u,rix2 %u,rix3 %u\n", rix0,rix1,rix2,rix3);
printf("lpAckDuration=%u\n", ic->ic_rt->info[0].lpAckDuration);
printf("rate=%d\n", ic->ic_rt->info[0].rateKbps);
#endif
return 0;
}
int32_t
wtap_detach(struct wtap_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
DWTAP_PRINTF("%s\n", __func__);
ieee80211_ageq_drain(&ic->ic_stageq);
ieee80211_ifdetach(ic);
if_free(ifp);
return 0;
}
void
wtap_resume(struct wtap_softc *sc)
{
DWTAP_PRINTF("%s\n", __func__);
}
void
wtap_suspend(struct wtap_softc *sc)
{
DWTAP_PRINTF("%s\n", __func__);
}
void
wtap_shutdown(struct wtap_softc *sc)
{
DWTAP_PRINTF("%s\n", __func__);
}
void
wtap_intr(struct wtap_softc *sc)
{
DWTAP_PRINTF("%s\n", __func__);
}
Reference in New Issue View Git Blame Copy Permalink