freebsd-nq/sys/sparc64/pci/ofw_pci.c
Thomas Moestl ed2f312db5 Reverse the quirk table entry for swizzling on a missing interrupt map;
this is now done on all machines except for some known problematic ones.

Add an additional guard to make sure that the interrupt numbers are
in the correct range before swizzling. This should catch any remaining
models for which the swizzle is inappropriate.

Correct the swizzle calculation to account for the fact that the parent
interrupt numbers to be swizzled are 1-based.

Approved by:	re
2002-12-01 23:06:14 +00:00

324 lines
9.7 KiB
C

/*
* Copyright (c) 1999, 2000 Matthew R. Green
* All rights reserved.
* Copyright 2001 by Thomas Moestl <tmm@FreeBSD.org>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: NetBSD: psycho.c,v 1.35 2001/09/10 16:17:06 eeh Exp
*
* $FreeBSD$
*/
#include "opt_ofw_pci.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/ofw/ofw_pci.h>
#include <dev/ofw/openfirm.h>
#include <sparc64/pci/ofw_pci.h>
#include <machine/ofw_bus.h>
#include <machine/ver.h>
#include "pcib_if.h"
u_int8_t pci_bus_cnt;
phandle_t *pci_bus_map;
int pci_bus_map_sz;
#define OPQ_NO_SWIZZLE 1
static struct ofw_pci_quirk {
char *opq_model;
int opq_quirks;
} ofw_pci_quirks[] = {
{ "SUNW,Ultra-4", OPQ_NO_SWIZZLE },
{ "SUNW,Ultra-1-Engine", OPQ_NO_SWIZZLE },
};
#define OPQ_NENT (sizeof(ofw_pci_quirks) / sizeof(ofw_pci_quirks[0]))
static int pci_quirks;
#define OFW_PCI_PCIBUS "pci"
#define PCI_BUS_MAP_INC 10
int
ofw_pci_orb_callback(phandle_t node, u_int8_t *pintptr, int pintsz,
u_int8_t *pregptr, int pregsz, u_int8_t **rintr, int *terminate)
{
struct ofw_pci_register preg;
u_int32_t pintr, intr;
char type[32];
if (pintsz != sizeof(u_int32_t))
return (-1);
bcopy(pintptr, &pintr, sizeof(pintr));
if ((pci_quirks & OPQ_NO_SWIZZLE) == 0 && pregsz >= sizeof(preg) &&
OF_getprop(node, "device_type", type, sizeof(type)) != -1 &&
strcmp(type, OFW_PCI_PCIBUS) == 0 && pintr >= 1 && pintr <= 4) {
/*
* Handle a quirk found on some Netra t1 models: there exist
* PCI bridges without interrupt maps, where we apparently must
* do the PCI swizzle and continue to map on at the parent.
*/
bcopy(pregptr, &preg, sizeof(preg));
intr = (OFW_PCI_PHYS_HI_DEVICE(preg.phys_hi) + pintr + 3) %
4 + 1;
*rintr = malloc(sizeof(intr), M_OFWPROP, M_WAITOK);
bcopy(&intr, *rintr, sizeof(intr));
*terminate = 0;
return (sizeof(intr));
}
return (-1);
}
u_int32_t
ofw_pci_route_intr(phandle_t node, u_int32_t ign)
{
u_int32_t rv;
rv = ofw_bus_route_intr(node, ORIP_NOINT, ofw_pci_orb_callback);
if (rv == ORIR_NOTFOUND)
return (255);
/*
* Some machines (notably the SPARCengine Ultra AX) have no mappings
* at all, but use complete interrupt vector number including the IGN.
* Catch this case and remove the IGN.
*/
if (rv > ign)
rv -= ign;
return (rv);
}
u_int8_t
ofw_pci_alloc_busno(phandle_t node)
{
phandle_t *om;
int osz;
u_int8_t n;
n = pci_bus_cnt++;
/* Establish a mapping between bus numbers and device nodes. */
if (n >= pci_bus_map_sz) {
osz = pci_bus_map_sz;
om = pci_bus_map;
pci_bus_map_sz = n + PCI_BUS_MAP_INC;
pci_bus_map = malloc(sizeof(*pci_bus_map) * pci_bus_map_sz,
M_DEVBUF, M_WAITOK | M_ZERO);
if (om != NULL) {
bcopy(om, pci_bus_map, sizeof(*om) * osz);
free(om, M_DEVBUF);
}
}
pci_bus_map[n] = node;
return (n);
}
/*
* Initialize bridge bus numbers for bridges that implement the primary,
* secondary and subordinate bus number registers.
*/
void
ofw_pci_binit(device_t busdev, struct ofw_pci_bdesc *obd)
{
#ifdef OFW_PCI_DEBUG
printf("PCI-PCI bridge at %u/%u/%u: setting bus #s to %u/%u/%u\n",
obd->obd_bus, obd->obd_slot, obd->obd_func, obd->obd_bus,
obd->obd_secbus, obd->obd_subbus);
#endif /* OFW_PCI_DEBUG */
PCIB_WRITE_CONFIG(busdev, obd->obd_bus, obd->obd_slot, obd->obd_func,
PCIR_PRIBUS_1, obd->obd_bus, 1);
PCIB_WRITE_CONFIG(busdev, obd->obd_bus, obd->obd_slot, obd->obd_func,
PCIR_SECBUS_1, obd->obd_secbus, 1);
PCIB_WRITE_CONFIG(busdev, obd->obd_bus, obd->obd_slot, obd->obd_func,
PCIR_SUBBUS_1, obd->obd_subbus, 1);
}
/*
* Walk the PCI bus hierarchy, starting with the root PCI bus and descending
* through bridges, and initialize the interrupt line and latency timer
* configuration registers of attached devices using firmware information,
* as well as the the bus numbers and ranges of the bridges.
*/
void
ofw_pci_init(device_t dev, phandle_t bushdl, u_int32_t ign,
struct ofw_pci_bdesc *obd)
{
struct ofw_pci_register pcir;
struct ofw_pci_bdesc subobd, *tobd;
phandle_t node;
char type[32];
int i, intr, freemap;
u_int slot, busno, func, sub, lat;
/* Initialize the quirk list. */
for (i = 0; i < OPQ_NENT; i++) {
if (strcmp(sparc64_model, ofw_pci_quirks[i].opq_model) == 0) {
pci_quirks = ofw_pci_quirks[i].opq_quirks;
break;
}
}
if ((node = OF_child(bushdl)) == 0)
return;
freemap = 0;
busno = obd->obd_secbus;
do {
if (node == -1)
panic("ofw_pci_init_intr: OF_child failed");
if (OF_getprop(node, "device_type", type, sizeof(type)) == -1)
type[0] = '\0';
else
type[sizeof(type) - 1] = '\0';
if (OF_getprop(node, "reg", &pcir, sizeof(pcir)) == -1)
panic("ofw_pci_init: OF_getprop failed");
slot = OFW_PCI_PHYS_HI_DEVICE(pcir.phys_hi);
func = OFW_PCI_PHYS_HI_FUNCTION(pcir.phys_hi);
if (strcmp(type, OFW_PCI_PCIBUS) == 0) {
/*
* This is a pci-pci bridge, initalize the bus number and
* recurse to initialize the child bus. The hierarchy is
* usually at most 2 levels deep, so recursion is
* feasible.
*/
subobd.obd_bus = busno;
subobd.obd_slot = slot;
subobd.obd_func = func;
sub = ofw_pci_alloc_busno(node);
subobd.obd_secbus = subobd.obd_subbus = sub;
/* Assume this bridge is mostly standard conforming. */
subobd.obd_init = ofw_pci_binit;
subobd.obd_super = obd;
/*
* Need to change all subordinate bus registers of the
* bridges above this one now so that configuration
* transactions will get through.
*/
for (tobd = obd; tobd != NULL; tobd = tobd->obd_super) {
tobd->obd_subbus = sub;
tobd->obd_init(dev, tobd);
}
subobd.obd_init(dev, &subobd);
#ifdef OFW_PCI_DEBUG
device_printf(dev, "%s: descending to "
"subordinate PCI bus\n", __func__);
#endif /* OFW_PCI_DEBUG */
ofw_pci_init(dev, node, ign, &subobd);
} else {
/*
* Initialize the latency timer register for
* busmaster devices to work properly. This is another
* task which the firmware does not always perform.
* The Min_Gnt register can be used to compute it's
* recommended value: it contains the desired latency
* in units of 1/4 us. To calculate the correct latency
* timer value, a bus clock of 33 and no wait states
* should be assumed.
*/
lat = PCIB_READ_CONFIG(dev, busno, slot, func,
PCIR_MINGNT, 1) * 33 / 4;
if (lat != 0) {
#ifdef OFW_PCI_DEBUG
printf("device %d/%d/%d: latency timer %d -> "
"%d\n", busno, slot, func,
PCIB_READ_CONFIG(dev, busno, slot, func,
PCIR_LATTIMER, 1), lat);
#endif /* OFW_PCI_DEBUG */
PCIB_WRITE_CONFIG(dev, busno, slot, func,
PCIR_LATTIMER, imin(lat, 255), 1);
}
/* Initialize the intline registers. */
if ((intr = ofw_pci_route_intr(node, ign)) != 255) {
#ifdef OFW_PCI_DEBUG
device_printf(dev, "%s: mapping intr for "
"%d/%d/%d to %d (preset was %d)\n",
__func__, busno, slot, func, intr,
(int)PCIB_READ_CONFIG(dev, busno, slot,
func, PCIR_INTLINE, 1));
#endif /* OFW_PCI_DEBUG */
PCIB_WRITE_CONFIG(dev, busno, slot, func,
PCIR_INTLINE, intr, 1);
} else {
#ifdef OFW_PCI_DEBUG
device_printf(dev, "%s: no interrupt "
"mapping found for %d/%d/%d (preset %d)\n",
__func__, busno, slot, func,
(int)PCIB_READ_CONFIG(dev, busno, slot,
func, PCIR_INTLINE, 1));
#endif /* OFW_PCI_DEBUG */
/*
* The firmware initializes to 0 instead of
* 255.
*/
PCIB_WRITE_CONFIG(dev, busno, slot, func,
PCIR_INTLINE, 255, 1);
}
}
} while ((node = OF_peer(node)) != 0);
}
phandle_t
ofw_pci_find_node(int bus, int slot, int func)
{
phandle_t node, bnode;
struct ofw_pci_register pcir;
/*
* Retrieve the bus node from the mapping that was created on
* initialization. The bus numbers the firmware uses cannot be trusted,
* so they might have needed to be changed and this is necessary.
*/
if (bus >= pci_bus_map_sz)
return (0);
bnode = pci_bus_map[bus];
if (bnode == 0)
return (0);
for (node = OF_child(bnode); node != 0 && node != -1;
node = OF_peer(node)) {
if (OF_getprop(node, "reg", &pcir, sizeof(pcir)) == -1)
continue;
if (OFW_PCI_PHYS_HI_DEVICE(pcir.phys_hi) == slot &&
OFW_PCI_PHYS_HI_FUNCTION(pcir.phys_hi) == func)
return (node);
}
return (0);
}
phandle_t
ofw_pci_node(device_t dev)
{
return (ofw_pci_find_node(pci_get_bus(dev), pci_get_slot(dev),
pci_get_function(dev)));
}