8900f4b872
in the CAM XPT bus traversal code, and a number of other periph level issues. cam_periph.h, cam_periph.c: Modify cam_periph_acquire() to test the CAM_PERIPH_INVALID flag prior to allowing a reference count to be gained on a peripheral. Callers of this function will receive CAM_REQ_CMP_ERR status in the situation of attempting to reference an invalidated periph. This guarantees that a peripheral scheduled for a deferred free will not be accessed during its wait for destruction. Panic during attempts to drop a reference count on a peripheral that already has a zero reference count. In cam_periph_list(), use a local sbuf with SBUF_FIXEDLEN set so that mallocs do not occur while the xpt topology lock is held, regardless of the allocation policy of the passed in sbuf. Add a new routine, cam_periph_release_locked_buses(), that can be called when the caller already holds the CAM topology lock. Add some extra debugging for duplicate peripheral allocations in cam_periph_alloc(). Treat CAM_DEV_NOT_THERE much the same as a selection timeout (AC_LOST_DEVICE is emitted), but forgo retries. cam_xpt.c: Revamp the way the EDT traversal code does locking and reference counting. This was broken, since it assumed that the EDT would not change during traversal, but that assumption is no longer valid. So, to prevent devices from going away while we traverse the EDT, make sure we properly lock everything and hold references on devices that we are using. The two peripheral driver traversal routines should be examined. xptpdperiphtraverse() holds the topology lock for the entire time it runs. xptperiphtraverse() is now locked properly, but only holds the topology lock while it is traversing the list, and not while the traversal function is running. The bus locking code in xptbustraverse() should also be revisited at a later time, since it is complex and should probably be simplified. scsi_da.c: Pay attention to the return value from cam_periph_acquire(). Return 0 always from daclose() even if the disk is now gone. Add some rudimentary error injection support. scsi_sg.c: Fix reference counting in the sg(4) driver. The sg driver was calling cam_periph_release() on close, but never called cam_periph_acquire() (which increments the reference count) on open. The periph code correctly complained that the sg(4) driver was trying to decrement the refcount when it was already 0. Sponsored by: Spectra Logic MFC after: 2 weeks
1010 lines
23 KiB
C
1010 lines
23 KiB
C
/*-
|
|
* Copyright (c) 2007 Scott Long
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* scsi_sg peripheral driver. This driver is meant to implement the Linux
|
|
* SG passthrough interface for SCSI.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/types.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/ioccom.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/uio.h>
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_periph.h>
|
|
#include <cam/cam_queue.h>
|
|
#include <cam/cam_xpt_periph.h>
|
|
#include <cam/cam_debug.h>
|
|
#include <cam/cam_sim.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
#include <cam/scsi/scsi_message.h>
|
|
#include <cam/scsi/scsi_sg.h>
|
|
|
|
#include <compat/linux/linux_ioctl.h>
|
|
|
|
typedef enum {
|
|
SG_FLAG_OPEN = 0x01,
|
|
SG_FLAG_LOCKED = 0x02,
|
|
SG_FLAG_INVALID = 0x04
|
|
} sg_flags;
|
|
|
|
typedef enum {
|
|
SG_STATE_NORMAL
|
|
} sg_state;
|
|
|
|
typedef enum {
|
|
SG_RDWR_FREE,
|
|
SG_RDWR_INPROG,
|
|
SG_RDWR_DONE
|
|
} sg_rdwr_state;
|
|
|
|
typedef enum {
|
|
SG_CCB_RDWR_IO,
|
|
SG_CCB_WAITING
|
|
} sg_ccb_types;
|
|
|
|
#define ccb_type ppriv_field0
|
|
#define ccb_rdwr ppriv_ptr1
|
|
|
|
struct sg_rdwr {
|
|
TAILQ_ENTRY(sg_rdwr) rdwr_link;
|
|
int tag;
|
|
int state;
|
|
int buf_len;
|
|
char *buf;
|
|
union ccb *ccb;
|
|
union {
|
|
struct sg_header hdr;
|
|
struct sg_io_hdr io_hdr;
|
|
} hdr;
|
|
};
|
|
|
|
struct sg_softc {
|
|
sg_state state;
|
|
sg_flags flags;
|
|
struct devstat *device_stats;
|
|
TAILQ_HEAD(, sg_rdwr) rdwr_done;
|
|
struct cdev *dev;
|
|
int sg_timeout;
|
|
int sg_user_timeout;
|
|
uint8_t pd_type;
|
|
union ccb saved_ccb;
|
|
};
|
|
|
|
static d_open_t sgopen;
|
|
static d_close_t sgclose;
|
|
static d_ioctl_t sgioctl;
|
|
static d_write_t sgwrite;
|
|
static d_read_t sgread;
|
|
|
|
static periph_init_t sginit;
|
|
static periph_ctor_t sgregister;
|
|
static periph_oninv_t sgoninvalidate;
|
|
static periph_dtor_t sgcleanup;
|
|
static periph_start_t sgstart;
|
|
static void sgasync(void *callback_arg, uint32_t code,
|
|
struct cam_path *path, void *arg);
|
|
static void sgdone(struct cam_periph *periph, union ccb *done_ccb);
|
|
static int sgsendccb(struct cam_periph *periph, union ccb *ccb);
|
|
static int sgsendrdwr(struct cam_periph *periph, union ccb *ccb);
|
|
static int sgerror(union ccb *ccb, uint32_t cam_flags,
|
|
uint32_t sense_flags);
|
|
static void sg_scsiio_status(struct ccb_scsiio *csio,
|
|
u_short *hoststat, u_short *drvstat);
|
|
|
|
static int scsi_group_len(u_char cmd);
|
|
|
|
static struct periph_driver sgdriver =
|
|
{
|
|
sginit, "sg",
|
|
TAILQ_HEAD_INITIALIZER(sgdriver.units), /* gen */ 0
|
|
};
|
|
PERIPHDRIVER_DECLARE(sg, sgdriver);
|
|
|
|
static struct cdevsw sg_cdevsw = {
|
|
.d_version = D_VERSION,
|
|
.d_flags = D_NEEDGIANT,
|
|
.d_open = sgopen,
|
|
.d_close = sgclose,
|
|
.d_ioctl = sgioctl,
|
|
.d_write = sgwrite,
|
|
.d_read = sgread,
|
|
.d_name = "sg",
|
|
};
|
|
|
|
static int sg_version = 30125;
|
|
|
|
static void
|
|
sginit(void)
|
|
{
|
|
cam_status status;
|
|
|
|
/*
|
|
* Install a global async callback. This callback will receive aync
|
|
* callbacks like "new device found".
|
|
*/
|
|
status = xpt_register_async(AC_FOUND_DEVICE, sgasync, NULL, NULL);
|
|
|
|
if (status != CAM_REQ_CMP) {
|
|
printf("sg: Failed to attach master async callbac "
|
|
"due to status 0x%x!\n", status);
|
|
}
|
|
}
|
|
|
|
static void
|
|
sgoninvalidate(struct cam_periph *periph)
|
|
{
|
|
struct sg_softc *softc;
|
|
|
|
softc = (struct sg_softc *)periph->softc;
|
|
|
|
/*
|
|
* Deregister any async callbacks.
|
|
*/
|
|
xpt_register_async(0, sgasync, periph, periph->path);
|
|
|
|
softc->flags |= SG_FLAG_INVALID;
|
|
|
|
/*
|
|
* XXX Return all queued I/O with ENXIO.
|
|
* XXX Handle any transactions queued to the card
|
|
* with XPT_ABORT_CCB.
|
|
*/
|
|
|
|
if (bootverbose) {
|
|
xpt_print(periph->path, "lost device\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
sgcleanup(struct cam_periph *periph)
|
|
{
|
|
struct sg_softc *softc;
|
|
|
|
softc = (struct sg_softc *)periph->softc;
|
|
if (bootverbose)
|
|
xpt_print(periph->path, "removing device entry\n");
|
|
devstat_remove_entry(softc->device_stats);
|
|
cam_periph_unlock(periph);
|
|
destroy_dev(softc->dev);
|
|
cam_periph_lock(periph);
|
|
free(softc, M_DEVBUF);
|
|
}
|
|
|
|
static void
|
|
sgasync(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
|
|
{
|
|
struct cam_periph *periph;
|
|
|
|
periph = (struct cam_periph *)callback_arg;
|
|
|
|
switch (code) {
|
|
case AC_FOUND_DEVICE:
|
|
{
|
|
struct ccb_getdev *cgd;
|
|
cam_status status;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
if (cgd == NULL)
|
|
break;
|
|
|
|
if (cgd->protocol != PROTO_SCSI)
|
|
break;
|
|
|
|
/*
|
|
* Allocate a peripheral instance for this device and
|
|
* start the probe process.
|
|
*/
|
|
status = cam_periph_alloc(sgregister, sgoninvalidate,
|
|
sgcleanup, sgstart, "sg",
|
|
CAM_PERIPH_BIO, cgd->ccb_h.path,
|
|
sgasync, AC_FOUND_DEVICE, cgd);
|
|
if ((status != CAM_REQ_CMP) && (status != CAM_REQ_INPROG)) {
|
|
const struct cam_status_entry *entry;
|
|
|
|
entry = cam_fetch_status_entry(status);
|
|
printf("sgasync: Unable to attach new device "
|
|
"due to status %#x: %s\n", status, entry ?
|
|
entry->status_text : "Unknown");
|
|
}
|
|
break;
|
|
}
|
|
default:
|
|
cam_periph_async(periph, code, path, arg);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static cam_status
|
|
sgregister(struct cam_periph *periph, void *arg)
|
|
{
|
|
struct sg_softc *softc;
|
|
struct ccb_getdev *cgd;
|
|
struct ccb_pathinq cpi;
|
|
int no_tags;
|
|
|
|
cgd = (struct ccb_getdev *)arg;
|
|
if (periph == NULL) {
|
|
printf("sgregister: periph was NULL!!\n");
|
|
return (CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
if (cgd == NULL) {
|
|
printf("sgregister: no getdev CCB, can't register device\n");
|
|
return (CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
softc = malloc(sizeof(*softc), M_DEVBUF, M_ZERO | M_NOWAIT);
|
|
if (softc == NULL) {
|
|
printf("sgregister: Unable to allocate softc\n");
|
|
return (CAM_REQ_CMP_ERR);
|
|
}
|
|
|
|
softc->state = SG_STATE_NORMAL;
|
|
softc->pd_type = SID_TYPE(&cgd->inq_data);
|
|
softc->sg_timeout = SG_DEFAULT_TIMEOUT / SG_DEFAULT_HZ * hz;
|
|
softc->sg_user_timeout = SG_DEFAULT_TIMEOUT;
|
|
TAILQ_INIT(&softc->rdwr_done);
|
|
periph->softc = softc;
|
|
|
|
bzero(&cpi, sizeof(cpi));
|
|
xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL);
|
|
cpi.ccb_h.func_code = XPT_PATH_INQ;
|
|
xpt_action((union ccb *)&cpi);
|
|
|
|
/*
|
|
* We pass in 0 for all blocksize, since we don't know what the
|
|
* blocksize of the device is, if it even has a blocksize.
|
|
*/
|
|
cam_periph_unlock(periph);
|
|
no_tags = (cgd->inq_data.flags & SID_CmdQue) == 0;
|
|
softc->device_stats = devstat_new_entry("sg",
|
|
periph->unit_number, 0,
|
|
DEVSTAT_NO_BLOCKSIZE
|
|
| (no_tags ? DEVSTAT_NO_ORDERED_TAGS : 0),
|
|
softc->pd_type |
|
|
XPORT_DEVSTAT_TYPE(cpi.transport) |
|
|
DEVSTAT_TYPE_PASS,
|
|
DEVSTAT_PRIORITY_PASS);
|
|
|
|
/* Register the device */
|
|
softc->dev = make_dev(&sg_cdevsw, periph->unit_number,
|
|
UID_ROOT, GID_OPERATOR, 0600, "%s%d",
|
|
periph->periph_name, periph->unit_number);
|
|
if (periph->unit_number < 26) {
|
|
(void)make_dev_alias(softc->dev, "sg%c",
|
|
periph->unit_number + 'a');
|
|
} else {
|
|
(void)make_dev_alias(softc->dev, "sg%c%c",
|
|
((periph->unit_number / 26) - 1) + 'a',
|
|
(periph->unit_number % 26) + 'a');
|
|
}
|
|
cam_periph_lock(periph);
|
|
softc->dev->si_drv1 = periph;
|
|
|
|
/*
|
|
* Add as async callback so that we get
|
|
* notified if this device goes away.
|
|
*/
|
|
xpt_register_async(AC_LOST_DEVICE, sgasync, periph, periph->path);
|
|
|
|
if (bootverbose)
|
|
xpt_announce_periph(periph, NULL);
|
|
|
|
return (CAM_REQ_CMP);
|
|
}
|
|
|
|
static void
|
|
sgstart(struct cam_periph *periph, union ccb *start_ccb)
|
|
{
|
|
struct sg_softc *softc;
|
|
|
|
softc = (struct sg_softc *)periph->softc;
|
|
|
|
switch (softc->state) {
|
|
case SG_STATE_NORMAL:
|
|
start_ccb->ccb_h.ccb_type = SG_CCB_WAITING;
|
|
SLIST_INSERT_HEAD(&periph->ccb_list, &start_ccb->ccb_h,
|
|
periph_links.sle);
|
|
periph->immediate_priority = CAM_PRIORITY_NONE;
|
|
wakeup(&periph->ccb_list);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
sgdone(struct cam_periph *periph, union ccb *done_ccb)
|
|
{
|
|
struct sg_softc *softc;
|
|
struct ccb_scsiio *csio;
|
|
|
|
softc = (struct sg_softc *)periph->softc;
|
|
csio = &done_ccb->csio;
|
|
switch (csio->ccb_h.ccb_type) {
|
|
case SG_CCB_WAITING:
|
|
/* Caller will release the CCB */
|
|
wakeup(&done_ccb->ccb_h.cbfcnp);
|
|
return;
|
|
case SG_CCB_RDWR_IO:
|
|
{
|
|
struct sg_rdwr *rdwr;
|
|
int state;
|
|
|
|
devstat_end_transaction(softc->device_stats,
|
|
csio->dxfer_len,
|
|
csio->tag_action & 0xf,
|
|
((csio->ccb_h.flags & CAM_DIR_MASK) ==
|
|
CAM_DIR_NONE) ? DEVSTAT_NO_DATA :
|
|
(csio->ccb_h.flags & CAM_DIR_OUT) ?
|
|
DEVSTAT_WRITE : DEVSTAT_READ,
|
|
NULL, NULL);
|
|
|
|
rdwr = done_ccb->ccb_h.ccb_rdwr;
|
|
state = rdwr->state;
|
|
rdwr->state = SG_RDWR_DONE;
|
|
wakeup(rdwr);
|
|
break;
|
|
}
|
|
default:
|
|
panic("unknown sg CCB type");
|
|
}
|
|
}
|
|
|
|
static int
|
|
sgopen(struct cdev *dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct sg_softc *softc;
|
|
int error = 0;
|
|
|
|
periph = (struct cam_periph *)dev->si_drv1;
|
|
if (periph == NULL)
|
|
return (ENXIO);
|
|
|
|
if (cam_periph_acquire(periph) != CAM_REQ_CMP)
|
|
return (ENXIO);
|
|
|
|
/*
|
|
* Don't allow access when we're running at a high securelevel.
|
|
*/
|
|
error = securelevel_gt(td->td_ucred, 1);
|
|
if (error) {
|
|
cam_periph_release(periph);
|
|
return (error);
|
|
}
|
|
|
|
cam_periph_lock(periph);
|
|
|
|
softc = (struct sg_softc *)periph->softc;
|
|
if (softc->flags & SG_FLAG_INVALID) {
|
|
cam_periph_unlock(periph);
|
|
cam_periph_release(periph);
|
|
return (ENXIO);
|
|
}
|
|
|
|
if ((softc->flags & SG_FLAG_OPEN) == 0) {
|
|
softc->flags |= SG_FLAG_OPEN;
|
|
cam_periph_unlock(periph);
|
|
} else {
|
|
/* Device closes aren't symmetrical, fix up the refcount. */
|
|
cam_periph_unlock(periph);
|
|
cam_periph_release(periph);
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
sgclose(struct cdev *dev, int flag, int fmt, struct thread *td)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct sg_softc *softc;
|
|
|
|
periph = (struct cam_periph *)dev->si_drv1;
|
|
if (periph == NULL)
|
|
return (ENXIO);
|
|
|
|
cam_periph_lock(periph);
|
|
|
|
softc = (struct sg_softc *)periph->softc;
|
|
softc->flags &= ~SG_FLAG_OPEN;
|
|
|
|
cam_periph_unlock(periph);
|
|
cam_periph_release(periph);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sgioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, struct thread *td)
|
|
{
|
|
union ccb *ccb;
|
|
struct ccb_scsiio *csio;
|
|
struct cam_periph *periph;
|
|
struct sg_softc *softc;
|
|
struct sg_io_hdr req;
|
|
int dir, error;
|
|
|
|
periph = (struct cam_periph *)dev->si_drv1;
|
|
if (periph == NULL)
|
|
return (ENXIO);
|
|
|
|
cam_periph_lock(periph);
|
|
|
|
softc = (struct sg_softc *)periph->softc;
|
|
error = 0;
|
|
|
|
switch (cmd) {
|
|
case LINUX_SCSI_GET_BUS_NUMBER: {
|
|
int busno;
|
|
|
|
busno = xpt_path_path_id(periph->path);
|
|
error = copyout(&busno, arg, sizeof(busno));
|
|
break;
|
|
}
|
|
case LINUX_SCSI_GET_IDLUN: {
|
|
struct scsi_idlun idlun;
|
|
struct cam_sim *sim;
|
|
|
|
idlun.dev_id = xpt_path_target_id(periph->path);
|
|
sim = xpt_path_sim(periph->path);
|
|
idlun.host_unique_id = sim->unit_number;
|
|
error = copyout(&idlun, arg, sizeof(idlun));
|
|
break;
|
|
}
|
|
case SG_GET_VERSION_NUM:
|
|
case LINUX_SG_GET_VERSION_NUM:
|
|
error = copyout(&sg_version, arg, sizeof(sg_version));
|
|
break;
|
|
case SG_SET_TIMEOUT:
|
|
case LINUX_SG_SET_TIMEOUT: {
|
|
u_int user_timeout;
|
|
|
|
error = copyin(arg, &user_timeout, sizeof(u_int));
|
|
if (error == 0) {
|
|
softc->sg_user_timeout = user_timeout;
|
|
softc->sg_timeout = user_timeout / SG_DEFAULT_HZ * hz;
|
|
}
|
|
break;
|
|
}
|
|
case SG_GET_TIMEOUT:
|
|
case LINUX_SG_GET_TIMEOUT:
|
|
/*
|
|
* The value is returned directly to the syscall.
|
|
*/
|
|
td->td_retval[0] = softc->sg_user_timeout;
|
|
error = 0;
|
|
break;
|
|
case SG_IO:
|
|
case LINUX_SG_IO:
|
|
error = copyin(arg, &req, sizeof(req));
|
|
if (error)
|
|
break;
|
|
|
|
if (req.cmd_len > IOCDBLEN) {
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (req.iovec_count != 0) {
|
|
error = EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
ccb = cam_periph_getccb(periph, CAM_PRIORITY_NORMAL);
|
|
csio = &ccb->csio;
|
|
|
|
error = copyin(req.cmdp, &csio->cdb_io.cdb_bytes,
|
|
req.cmd_len);
|
|
if (error) {
|
|
xpt_release_ccb(ccb);
|
|
break;
|
|
}
|
|
|
|
switch(req.dxfer_direction) {
|
|
case SG_DXFER_TO_DEV:
|
|
dir = CAM_DIR_OUT;
|
|
break;
|
|
case SG_DXFER_FROM_DEV:
|
|
dir = CAM_DIR_IN;
|
|
break;
|
|
case SG_DXFER_TO_FROM_DEV:
|
|
dir = CAM_DIR_IN | CAM_DIR_OUT;
|
|
break;
|
|
case SG_DXFER_NONE:
|
|
default:
|
|
dir = CAM_DIR_NONE;
|
|
break;
|
|
}
|
|
|
|
cam_fill_csio(csio,
|
|
/*retries*/1,
|
|
sgdone,
|
|
dir|CAM_DEV_QFRZDIS,
|
|
MSG_SIMPLE_Q_TAG,
|
|
req.dxferp,
|
|
req.dxfer_len,
|
|
req.mx_sb_len,
|
|
req.cmd_len,
|
|
req.timeout);
|
|
|
|
error = sgsendccb(periph, ccb);
|
|
if (error) {
|
|
req.host_status = DID_ERROR;
|
|
req.driver_status = DRIVER_INVALID;
|
|
xpt_release_ccb(ccb);
|
|
break;
|
|
}
|
|
|
|
req.status = csio->scsi_status;
|
|
req.masked_status = (csio->scsi_status >> 1) & 0x7f;
|
|
sg_scsiio_status(csio, &req.host_status, &req.driver_status);
|
|
req.resid = csio->resid;
|
|
req.duration = csio->ccb_h.timeout;
|
|
req.info = 0;
|
|
|
|
error = copyout(&req, arg, sizeof(req));
|
|
if ((error == 0) && (csio->ccb_h.status & CAM_AUTOSNS_VALID)
|
|
&& (req.sbp != NULL)) {
|
|
req.sb_len_wr = req.mx_sb_len - csio->sense_resid;
|
|
error = copyout(&csio->sense_data, req.sbp,
|
|
req.sb_len_wr);
|
|
}
|
|
|
|
xpt_release_ccb(ccb);
|
|
break;
|
|
|
|
case SG_GET_RESERVED_SIZE:
|
|
case LINUX_SG_GET_RESERVED_SIZE: {
|
|
int size = 32768;
|
|
|
|
error = copyout(&size, arg, sizeof(size));
|
|
break;
|
|
}
|
|
|
|
case SG_GET_SCSI_ID:
|
|
case LINUX_SG_GET_SCSI_ID:
|
|
{
|
|
struct sg_scsi_id id;
|
|
|
|
id.host_no = cam_sim_path(xpt_path_sim(periph->path));
|
|
id.channel = xpt_path_path_id(periph->path);
|
|
id.scsi_id = xpt_path_target_id(periph->path);
|
|
id.lun = xpt_path_lun_id(periph->path);
|
|
id.scsi_type = softc->pd_type;
|
|
id.h_cmd_per_lun = 1;
|
|
id.d_queue_depth = 1;
|
|
id.unused[0] = 0;
|
|
id.unused[1] = 0;
|
|
|
|
error = copyout(&id, arg, sizeof(id));
|
|
break;
|
|
}
|
|
|
|
case SG_EMULATED_HOST:
|
|
case SG_SET_TRANSFORM:
|
|
case SG_GET_TRANSFORM:
|
|
case SG_GET_NUM_WAITING:
|
|
case SG_SCSI_RESET:
|
|
case SG_GET_REQUEST_TABLE:
|
|
case SG_SET_KEEP_ORPHAN:
|
|
case SG_GET_KEEP_ORPHAN:
|
|
case SG_GET_ACCESS_COUNT:
|
|
case SG_SET_FORCE_LOW_DMA:
|
|
case SG_GET_LOW_DMA:
|
|
case SG_GET_SG_TABLESIZE:
|
|
case SG_SET_FORCE_PACK_ID:
|
|
case SG_GET_PACK_ID:
|
|
case SG_SET_RESERVED_SIZE:
|
|
case SG_GET_COMMAND_Q:
|
|
case SG_SET_COMMAND_Q:
|
|
case SG_SET_DEBUG:
|
|
case SG_NEXT_CMD_LEN:
|
|
case LINUX_SG_EMULATED_HOST:
|
|
case LINUX_SG_SET_TRANSFORM:
|
|
case LINUX_SG_GET_TRANSFORM:
|
|
case LINUX_SG_GET_NUM_WAITING:
|
|
case LINUX_SG_SCSI_RESET:
|
|
case LINUX_SG_GET_REQUEST_TABLE:
|
|
case LINUX_SG_SET_KEEP_ORPHAN:
|
|
case LINUX_SG_GET_KEEP_ORPHAN:
|
|
case LINUX_SG_GET_ACCESS_COUNT:
|
|
case LINUX_SG_SET_FORCE_LOW_DMA:
|
|
case LINUX_SG_GET_LOW_DMA:
|
|
case LINUX_SG_GET_SG_TABLESIZE:
|
|
case LINUX_SG_SET_FORCE_PACK_ID:
|
|
case LINUX_SG_GET_PACK_ID:
|
|
case LINUX_SG_SET_RESERVED_SIZE:
|
|
case LINUX_SG_GET_COMMAND_Q:
|
|
case LINUX_SG_SET_COMMAND_Q:
|
|
case LINUX_SG_SET_DEBUG:
|
|
case LINUX_SG_NEXT_CMD_LEN:
|
|
default:
|
|
#ifdef CAMDEBUG
|
|
printf("sgioctl: rejecting cmd 0x%lx\n", cmd);
|
|
#endif
|
|
error = ENODEV;
|
|
break;
|
|
}
|
|
|
|
cam_periph_unlock(periph);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
sgwrite(struct cdev *dev, struct uio *uio, int ioflag)
|
|
{
|
|
union ccb *ccb;
|
|
struct cam_periph *periph;
|
|
struct ccb_scsiio *csio;
|
|
struct sg_softc *sc;
|
|
struct sg_header *hdr;
|
|
struct sg_rdwr *rdwr;
|
|
u_char cdb_cmd;
|
|
char *buf;
|
|
int error = 0, cdb_len, buf_len, dir;
|
|
|
|
periph = dev->si_drv1;
|
|
rdwr = malloc(sizeof(*rdwr), M_DEVBUF, M_WAITOK | M_ZERO);
|
|
hdr = &rdwr->hdr.hdr;
|
|
|
|
/* Copy in the header block and sanity check it */
|
|
if (uio->uio_resid < sizeof(*hdr)) {
|
|
error = EINVAL;
|
|
goto out_hdr;
|
|
}
|
|
error = uiomove(hdr, sizeof(*hdr), uio);
|
|
if (error)
|
|
goto out_hdr;
|
|
|
|
ccb = xpt_alloc_ccb();
|
|
if (ccb == NULL) {
|
|
error = ENOMEM;
|
|
goto out_hdr;
|
|
}
|
|
csio = &ccb->csio;
|
|
|
|
/*
|
|
* Copy in the CDB block. The designers of the interface didn't
|
|
* bother to provide a size for this in the header, so we have to
|
|
* figure it out ourselves.
|
|
*/
|
|
if (uio->uio_resid < 1)
|
|
goto out_ccb;
|
|
error = uiomove(&cdb_cmd, 1, uio);
|
|
if (error)
|
|
goto out_ccb;
|
|
if (hdr->twelve_byte)
|
|
cdb_len = 12;
|
|
else
|
|
cdb_len = scsi_group_len(cdb_cmd);
|
|
/*
|
|
* We've already read the first byte of the CDB and advanced the uio
|
|
* pointer. Just read the rest.
|
|
*/
|
|
csio->cdb_io.cdb_bytes[0] = cdb_cmd;
|
|
error = uiomove(&csio->cdb_io.cdb_bytes[1], cdb_len - 1, uio);
|
|
if (error)
|
|
goto out_ccb;
|
|
|
|
/*
|
|
* Now set up the data block. Again, the designers didn't bother
|
|
* to make this reliable.
|
|
*/
|
|
buf_len = uio->uio_resid;
|
|
if (buf_len != 0) {
|
|
buf = malloc(buf_len, M_DEVBUF, M_WAITOK | M_ZERO);
|
|
error = uiomove(buf, buf_len, uio);
|
|
if (error)
|
|
goto out_buf;
|
|
dir = CAM_DIR_OUT;
|
|
} else if (hdr->reply_len != 0) {
|
|
buf = malloc(hdr->reply_len, M_DEVBUF, M_WAITOK | M_ZERO);
|
|
buf_len = hdr->reply_len;
|
|
dir = CAM_DIR_IN;
|
|
} else {
|
|
buf = NULL;
|
|
buf_len = 0;
|
|
dir = CAM_DIR_NONE;
|
|
}
|
|
|
|
cam_periph_lock(periph);
|
|
sc = periph->softc;
|
|
xpt_setup_ccb(&ccb->ccb_h, periph->path, CAM_PRIORITY_NORMAL);
|
|
cam_fill_csio(csio,
|
|
/*retries*/1,
|
|
sgdone,
|
|
dir|CAM_DEV_QFRZDIS,
|
|
MSG_SIMPLE_Q_TAG,
|
|
buf,
|
|
buf_len,
|
|
SG_MAX_SENSE,
|
|
cdb_len,
|
|
sc->sg_timeout);
|
|
|
|
/*
|
|
* Send off the command and hope that it works. This path does not
|
|
* go through sgstart because the I/O is supposed to be asynchronous.
|
|
*/
|
|
rdwr->buf = buf;
|
|
rdwr->buf_len = buf_len;
|
|
rdwr->tag = hdr->pack_id;
|
|
rdwr->ccb = ccb;
|
|
rdwr->state = SG_RDWR_INPROG;
|
|
ccb->ccb_h.ccb_rdwr = rdwr;
|
|
ccb->ccb_h.ccb_type = SG_CCB_RDWR_IO;
|
|
TAILQ_INSERT_TAIL(&sc->rdwr_done, rdwr, rdwr_link);
|
|
error = sgsendrdwr(periph, ccb);
|
|
cam_periph_unlock(periph);
|
|
return (error);
|
|
|
|
out_buf:
|
|
free(buf, M_DEVBUF);
|
|
out_ccb:
|
|
xpt_free_ccb(ccb);
|
|
out_hdr:
|
|
free(rdwr, M_DEVBUF);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
sgread(struct cdev *dev, struct uio *uio, int ioflag)
|
|
{
|
|
struct ccb_scsiio *csio;
|
|
struct cam_periph *periph;
|
|
struct sg_softc *sc;
|
|
struct sg_header *hdr;
|
|
struct sg_rdwr *rdwr;
|
|
u_short hstat, dstat;
|
|
int error, pack_len, reply_len, pack_id;
|
|
|
|
periph = dev->si_drv1;
|
|
|
|
/* XXX The pack len field needs to be updated and written out instead
|
|
* of discarded. Not sure how to do that.
|
|
*/
|
|
uio->uio_rw = UIO_WRITE;
|
|
if ((error = uiomove(&pack_len, 4, uio)) != 0)
|
|
return (error);
|
|
if ((error = uiomove(&reply_len, 4, uio)) != 0)
|
|
return (error);
|
|
if ((error = uiomove(&pack_id, 4, uio)) != 0)
|
|
return (error);
|
|
uio->uio_rw = UIO_READ;
|
|
|
|
cam_periph_lock(periph);
|
|
sc = periph->softc;
|
|
search:
|
|
TAILQ_FOREACH(rdwr, &sc->rdwr_done, rdwr_link) {
|
|
if (rdwr->tag == pack_id)
|
|
break;
|
|
}
|
|
if ((rdwr == NULL) || (rdwr->state != SG_RDWR_DONE)) {
|
|
if (msleep(rdwr, periph->sim->mtx, PCATCH, "sgread", 0) == ERESTART)
|
|
return (EAGAIN);
|
|
goto search;
|
|
}
|
|
TAILQ_REMOVE(&sc->rdwr_done, rdwr, rdwr_link);
|
|
cam_periph_unlock(periph);
|
|
|
|
hdr = &rdwr->hdr.hdr;
|
|
csio = &rdwr->ccb->csio;
|
|
sg_scsiio_status(csio, &hstat, &dstat);
|
|
hdr->host_status = hstat;
|
|
hdr->driver_status = dstat;
|
|
hdr->target_status = csio->scsi_status >> 1;
|
|
|
|
switch (hstat) {
|
|
case DID_OK:
|
|
case DID_PASSTHROUGH:
|
|
case DID_SOFT_ERROR:
|
|
hdr->result = 0;
|
|
break;
|
|
case DID_NO_CONNECT:
|
|
case DID_BUS_BUSY:
|
|
case DID_TIME_OUT:
|
|
hdr->result = EBUSY;
|
|
break;
|
|
case DID_BAD_TARGET:
|
|
case DID_ABORT:
|
|
case DID_PARITY:
|
|
case DID_RESET:
|
|
case DID_BAD_INTR:
|
|
case DID_ERROR:
|
|
default:
|
|
hdr->result = EIO;
|
|
break;
|
|
}
|
|
|
|
if (dstat == DRIVER_SENSE) {
|
|
bcopy(&csio->sense_data, hdr->sense_buffer,
|
|
min(csio->sense_len, SG_MAX_SENSE));
|
|
#ifdef CAMDEBUG
|
|
scsi_sense_print(csio);
|
|
#endif
|
|
}
|
|
|
|
error = uiomove(&hdr->result, sizeof(*hdr) -
|
|
offsetof(struct sg_header, result), uio);
|
|
if ((error == 0) && (hdr->result == 0))
|
|
error = uiomove(rdwr->buf, rdwr->buf_len, uio);
|
|
|
|
cam_periph_lock(periph);
|
|
xpt_free_ccb(rdwr->ccb);
|
|
cam_periph_unlock(periph);
|
|
free(rdwr->buf, M_DEVBUF);
|
|
free(rdwr, M_DEVBUF);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
sgsendccb(struct cam_periph *periph, union ccb *ccb)
|
|
{
|
|
struct sg_softc *softc;
|
|
struct cam_periph_map_info mapinfo;
|
|
int error, need_unmap = 0;
|
|
|
|
softc = periph->softc;
|
|
if (((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE)
|
|
&& (ccb->csio.data_ptr != NULL)) {
|
|
bzero(&mapinfo, sizeof(mapinfo));
|
|
|
|
/*
|
|
* cam_periph_mapmem calls into proc and vm functions that can
|
|
* sleep as well as trigger I/O, so we can't hold the lock.
|
|
* Dropping it here is reasonably safe.
|
|
*/
|
|
cam_periph_unlock(periph);
|
|
error = cam_periph_mapmem(ccb, &mapinfo);
|
|
cam_periph_lock(periph);
|
|
if (error)
|
|
return (error);
|
|
need_unmap = 1;
|
|
}
|
|
|
|
error = cam_periph_runccb(ccb,
|
|
sgerror,
|
|
CAM_RETRY_SELTO,
|
|
SF_RETRY_UA,
|
|
softc->device_stats);
|
|
|
|
if (need_unmap)
|
|
cam_periph_unmapmem(ccb, &mapinfo);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
sgsendrdwr(struct cam_periph *periph, union ccb *ccb)
|
|
{
|
|
struct sg_softc *softc;
|
|
|
|
softc = periph->softc;
|
|
devstat_start_transaction(softc->device_stats, NULL);
|
|
xpt_action(ccb);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
sgerror(union ccb *ccb, uint32_t cam_flags, uint32_t sense_flags)
|
|
{
|
|
struct cam_periph *periph;
|
|
struct sg_softc *softc;
|
|
|
|
periph = xpt_path_periph(ccb->ccb_h.path);
|
|
softc = (struct sg_softc *)periph->softc;
|
|
|
|
return (cam_periph_error(ccb, cam_flags, sense_flags,
|
|
&softc->saved_ccb));
|
|
}
|
|
|
|
static void
|
|
sg_scsiio_status(struct ccb_scsiio *csio, u_short *hoststat, u_short *drvstat)
|
|
{
|
|
int status;
|
|
|
|
status = csio->ccb_h.status;
|
|
|
|
switch (status & CAM_STATUS_MASK) {
|
|
case CAM_REQ_CMP:
|
|
*hoststat = DID_OK;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_REQ_CMP_ERR:
|
|
*hoststat = DID_ERROR;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_REQ_ABORTED:
|
|
*hoststat = DID_ABORT;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_REQ_INVALID:
|
|
*hoststat = DID_ERROR;
|
|
*drvstat = DRIVER_INVALID;
|
|
break;
|
|
case CAM_DEV_NOT_THERE:
|
|
*hoststat = DID_BAD_TARGET;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_SEL_TIMEOUT:
|
|
*hoststat = DID_NO_CONNECT;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_CMD_TIMEOUT:
|
|
*hoststat = DID_TIME_OUT;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_SCSI_STATUS_ERROR:
|
|
*hoststat = DID_ERROR;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_SCSI_BUS_RESET:
|
|
*hoststat = DID_RESET;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_UNCOR_PARITY:
|
|
*hoststat = DID_PARITY;
|
|
*drvstat = 0;
|
|
break;
|
|
case CAM_SCSI_BUSY:
|
|
*hoststat = DID_BUS_BUSY;
|
|
*drvstat = 0;
|
|
break;
|
|
default:
|
|
*hoststat = DID_ERROR;
|
|
*drvstat = DRIVER_ERROR;
|
|
}
|
|
|
|
if (status & CAM_AUTOSNS_VALID)
|
|
*drvstat = DRIVER_SENSE;
|
|
}
|
|
|
|
static int
|
|
scsi_group_len(u_char cmd)
|
|
{
|
|
int len[] = {6, 10, 10, 12, 12, 12, 10, 10};
|
|
int group;
|
|
|
|
group = (cmd >> 5) & 0x7;
|
|
return (len[group]);
|
|
}
|
|
|