8919d7d4e7
Like the PNIC, we have to copy packet headers in the receive handler because the chip will only DMA to longword aligned buffers. Also do some mindor cleanups.
2480 lines
59 KiB
C
2480 lines
59 KiB
C
/*
|
|
* Copyright (c) 1997, 1998
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id: if_mx.c,v 1.37 1999/04/01 02:00:04 wpaul Exp $
|
|
*/
|
|
|
|
/*
|
|
* Macronix PMAC fast ethernet PCI NIC driver
|
|
*
|
|
* Written by Bill Paul <wpaul@ctr.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The Macronix 98713, 98715 and 98725 chips are still more tulip clones.
|
|
* The 98713 has an internal transceiver and an MII bus for external PHYs.
|
|
* The other two chips have only the internal transceiver. All have
|
|
* support for built-in autonegotiation. Additionally, there are 98713A
|
|
* and 98715A chips which support power management. The 98725 chip
|
|
* supports power management as well.
|
|
*
|
|
* Datasheets for the Macronix parts can be obtained from www.macronix.com.
|
|
* Note however that the datasheets do not describe the TX and RX
|
|
* descriptor structures or the setup frame format(s). For this, you should
|
|
* obtain a DEC 21x4x datasheet from developer.intel.com. The Macronix
|
|
* chips look to be fairly straightforward tulip clones, except for
|
|
* the NWAY support.
|
|
*/
|
|
|
|
#include "bpfilter.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#include <vm/vm.h> /* for vtophys */
|
|
#include <vm/pmap.h> /* for vtophys */
|
|
#include <machine/clock.h> /* for DELAY */
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus_memio.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <pci/pcireg.h>
|
|
#include <pci/pcivar.h>
|
|
|
|
#define MX_USEIOSPACE
|
|
|
|
/* #define MX_BACKGROUND_AUTONEG */
|
|
|
|
#include <pci/if_mxreg.h>
|
|
|
|
#ifndef lint
|
|
static const char rcsid[] =
|
|
"$Id: if_mx.c,v 1.37 1999/04/01 02:00:04 wpaul Exp $";
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static struct mx_type mx_devs[] = {
|
|
{ MX_VENDORID, MX_DEVICEID_98713,
|
|
"Macronix 98713 10/100BaseTX" },
|
|
{ MX_VENDORID, MX_DEVICEID_98713,
|
|
"Macronix 98713A 10/100BaseTX" },
|
|
{ MX_VENDORID, MX_DEVICEID_987x5,
|
|
"Macronix 98715/98715A 10/100BaseTX" },
|
|
{ MX_VENDORID, MX_DEVICEID_987x5,
|
|
"Macronix 98725 10/100BaseTX" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
/*
|
|
* Various supported PHY vendors/types and their names. Note that
|
|
* this driver will work with pretty much any MII-compliant PHY,
|
|
* so failure to positively identify the chip is not a fatal error.
|
|
*/
|
|
|
|
static struct mx_type mx_phys[] = {
|
|
{ TI_PHY_VENDORID, TI_PHY_10BT, "<TI ThunderLAN 10BT (internal)>" },
|
|
{ TI_PHY_VENDORID, TI_PHY_100VGPMI, "<TI TNETE211 100VG Any-LAN>" },
|
|
{ NS_PHY_VENDORID, NS_PHY_83840A, "<National Semiconductor DP83840A>"},
|
|
{ LEVEL1_PHY_VENDORID, LEVEL1_PHY_LXT970, "<Level 1 LXT970>" },
|
|
{ INTEL_PHY_VENDORID, INTEL_PHY_82555, "<Intel 82555>" },
|
|
{ SEEQ_PHY_VENDORID, SEEQ_PHY_80220, "<SEEQ 80220>" },
|
|
{ 0, 0, "<MII-compliant physical interface>" }
|
|
};
|
|
|
|
static unsigned long mx_count = 0;
|
|
static const char *mx_probe __P((pcici_t, pcidi_t));
|
|
static void mx_attach __P((pcici_t, int));
|
|
|
|
static int mx_newbuf __P((struct mx_softc *,
|
|
struct mx_chain_onefrag *));
|
|
static int mx_encap __P((struct mx_softc *, struct mx_chain *,
|
|
struct mbuf *));
|
|
|
|
static void mx_rxeof __P((struct mx_softc *));
|
|
static void mx_rxeoc __P((struct mx_softc *));
|
|
static void mx_txeof __P((struct mx_softc *));
|
|
static void mx_txeoc __P((struct mx_softc *));
|
|
static void mx_intr __P((void *));
|
|
static void mx_start __P((struct ifnet *));
|
|
static int mx_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
static void mx_init __P((void *));
|
|
static void mx_stop __P((struct mx_softc *));
|
|
static void mx_watchdog __P((struct ifnet *));
|
|
static void mx_shutdown __P((int, void *));
|
|
static int mx_ifmedia_upd __P((struct ifnet *));
|
|
static void mx_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
static void mx_delay __P((struct mx_softc *));
|
|
static void mx_eeprom_idle __P((struct mx_softc *));
|
|
static void mx_eeprom_putbyte __P((struct mx_softc *, int));
|
|
static void mx_eeprom_getword __P((struct mx_softc *, int, u_int16_t *));
|
|
static void mx_read_eeprom __P((struct mx_softc *, caddr_t, int,
|
|
int, int));
|
|
|
|
static void mx_mii_writebit __P((struct mx_softc *, int));
|
|
static int mx_mii_readbit __P((struct mx_softc *));
|
|
static void mx_mii_sync __P((struct mx_softc *));
|
|
static void mx_mii_send __P((struct mx_softc *, u_int32_t, int));
|
|
static int mx_mii_readreg __P((struct mx_softc *, struct mx_mii_frame *));
|
|
static int mx_mii_writereg __P((struct mx_softc *, struct mx_mii_frame *));
|
|
static u_int16_t mx_phy_readreg __P((struct mx_softc *, int));
|
|
static void mx_phy_writereg __P((struct mx_softc *, int, int));
|
|
|
|
static void mx_autoneg_xmit __P((struct mx_softc *));
|
|
static void mx_autoneg_mii __P((struct mx_softc *, int, int));
|
|
static void mx_autoneg __P((struct mx_softc *, int, int));
|
|
static void mx_setmode_mii __P((struct mx_softc *, int));
|
|
static void mx_setmode __P((struct mx_softc *, int, int));
|
|
static void mx_getmode_mii __P((struct mx_softc *));
|
|
static void mx_setcfg __P((struct mx_softc *, int));
|
|
static u_int32_t mx_calchash __P((caddr_t));
|
|
static void mx_setfilt __P((struct mx_softc *));
|
|
static void mx_reset __P((struct mx_softc *));
|
|
static int mx_list_rx_init __P((struct mx_softc *));
|
|
static int mx_list_tx_init __P((struct mx_softc *));
|
|
|
|
#define MX_SETBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) | x)
|
|
|
|
#define MX_CLRBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) & ~x)
|
|
|
|
#define SIO_SET(x) \
|
|
CSR_WRITE_4(sc, MX_SIO, \
|
|
CSR_READ_4(sc, MX_SIO) | x)
|
|
|
|
#define SIO_CLR(x) \
|
|
CSR_WRITE_4(sc, MX_SIO, \
|
|
CSR_READ_4(sc, MX_SIO) & ~x)
|
|
|
|
static void mx_delay(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
int idx;
|
|
|
|
for (idx = (300 / 33) + 1; idx > 0; idx--)
|
|
CSR_READ_4(sc, MX_BUSCTL);
|
|
}
|
|
|
|
static void mx_eeprom_idle(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
CSR_WRITE_4(sc, MX_SIO, MX_SIO_EESEL);
|
|
mx_delay(sc);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_ROMCTL_READ);
|
|
mx_delay(sc);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_EE_CS);
|
|
mx_delay(sc);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
|
|
for (i = 0; i < 25; i++) {
|
|
MX_CLRBIT(sc, MX_SIO, MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
}
|
|
|
|
MX_CLRBIT(sc, MX_SIO, MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
MX_CLRBIT(sc, MX_SIO, MX_SIO_EE_CS);
|
|
mx_delay(sc);
|
|
CSR_WRITE_4(sc, MX_SIO, 0x00000000);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Send a read command and address to the EEPROM, check for ACK.
|
|
*/
|
|
static void mx_eeprom_putbyte(sc, addr)
|
|
struct mx_softc *sc;
|
|
int addr;
|
|
{
|
|
register int d, i;
|
|
|
|
d = addr | MX_EECMD_READ;
|
|
|
|
/*
|
|
* Feed in each bit and stobe the clock.
|
|
*/
|
|
for (i = 0x400; i; i >>= 1) {
|
|
if (d & i) {
|
|
SIO_SET(MX_SIO_EE_DATAIN);
|
|
} else {
|
|
SIO_CLR(MX_SIO_EE_DATAIN);
|
|
}
|
|
mx_delay(sc);
|
|
SIO_SET(MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
SIO_CLR(MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
static void mx_eeprom_getword(sc, addr, dest)
|
|
struct mx_softc *sc;
|
|
int addr;
|
|
u_int16_t *dest;
|
|
{
|
|
register int i;
|
|
u_int16_t word = 0;
|
|
|
|
/* Force EEPROM to idle state. */
|
|
mx_eeprom_idle(sc);
|
|
|
|
/* Enter EEPROM access mode. */
|
|
CSR_WRITE_4(sc, MX_SIO, MX_SIO_EESEL);
|
|
mx_delay(sc);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_ROMCTL_READ);
|
|
mx_delay(sc);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_EE_CS);
|
|
mx_delay(sc);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
|
|
/*
|
|
* Send address of word we want to read.
|
|
*/
|
|
mx_eeprom_putbyte(sc, addr);
|
|
|
|
/*
|
|
* Start reading bits from EEPROM.
|
|
*/
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
SIO_SET(MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
if (CSR_READ_4(sc, MX_SIO) & MX_SIO_EE_DATAOUT)
|
|
word |= i;
|
|
mx_delay(sc);
|
|
SIO_CLR(MX_SIO_EE_CLK);
|
|
mx_delay(sc);
|
|
}
|
|
|
|
/* Turn off EEPROM access mode. */
|
|
mx_eeprom_idle(sc);
|
|
|
|
*dest = word;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
static void mx_read_eeprom(sc, dest, off, cnt, swap)
|
|
struct mx_softc *sc;
|
|
caddr_t dest;
|
|
int off;
|
|
int cnt;
|
|
int swap;
|
|
{
|
|
int i;
|
|
u_int16_t word = 0, *ptr;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
mx_eeprom_getword(sc, off + i, &word);
|
|
ptr = (u_int16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The following two routines are taken from the Macronix 98713
|
|
* Application Notes pp.19-21.
|
|
*/
|
|
/*
|
|
* Write a bit to the MII bus.
|
|
*/
|
|
static void mx_mii_writebit(sc, bit)
|
|
struct mx_softc *sc;
|
|
int bit;
|
|
{
|
|
if (bit)
|
|
CSR_WRITE_4(sc, MX_SIO, MX_SIO_ROMCTL_WRITE|MX_SIO_MII_DATAOUT);
|
|
else
|
|
CSR_WRITE_4(sc, MX_SIO, MX_SIO_ROMCTL_WRITE);
|
|
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_MII_CLK);
|
|
MX_CLRBIT(sc, MX_SIO, MX_SIO_MII_CLK);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a bit from the MII bus.
|
|
*/
|
|
static int mx_mii_readbit(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
CSR_WRITE_4(sc, MX_SIO, MX_SIO_ROMCTL_READ|MX_SIO_MII_DIR);
|
|
CSR_READ_4(sc, MX_SIO);
|
|
MX_SETBIT(sc, MX_SIO, MX_SIO_MII_CLK);
|
|
MX_CLRBIT(sc, MX_SIO, MX_SIO_MII_CLK);
|
|
if (CSR_READ_4(sc, MX_SIO) & MX_SIO_MII_DATAIN)
|
|
return(1);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Sync the PHYs by setting data bit and strobing the clock 32 times.
|
|
*/
|
|
static void mx_mii_sync(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
CSR_WRITE_4(sc, MX_SIO, MX_SIO_ROMCTL_WRITE);
|
|
|
|
for (i = 0; i < 32; i++)
|
|
mx_mii_writebit(sc, 1);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Clock a series of bits through the MII.
|
|
*/
|
|
static void mx_mii_send(sc, bits, cnt)
|
|
struct mx_softc *sc;
|
|
u_int32_t bits;
|
|
int cnt;
|
|
{
|
|
int i;
|
|
|
|
for (i = (0x1 << (cnt - 1)); i; i >>= 1)
|
|
mx_mii_writebit(sc, bits & i);
|
|
}
|
|
|
|
/*
|
|
* Read an PHY register through the MII.
|
|
*/
|
|
static int mx_mii_readreg(sc, frame)
|
|
struct mx_softc *sc;
|
|
struct mx_mii_frame *frame;
|
|
|
|
{
|
|
int i, ack, s;
|
|
|
|
s = splimp();
|
|
|
|
/*
|
|
* Set up frame for RX.
|
|
*/
|
|
frame->mii_stdelim = MX_MII_STARTDELIM;
|
|
frame->mii_opcode = MX_MII_READOP;
|
|
frame->mii_turnaround = 0;
|
|
frame->mii_data = 0;
|
|
|
|
/*
|
|
* Sync the PHYs.
|
|
*/
|
|
mx_mii_sync(sc);
|
|
|
|
/*
|
|
* Send command/address info.
|
|
*/
|
|
mx_mii_send(sc, frame->mii_stdelim, 2);
|
|
mx_mii_send(sc, frame->mii_opcode, 2);
|
|
mx_mii_send(sc, frame->mii_phyaddr, 5);
|
|
mx_mii_send(sc, frame->mii_regaddr, 5);
|
|
|
|
#ifdef notdef
|
|
/* Idle bit */
|
|
mx_mii_writebit(sc, 1);
|
|
mx_mii_writebit(sc, 0);
|
|
#endif
|
|
|
|
/* Check for ack */
|
|
ack = mx_mii_readbit(sc);
|
|
|
|
/*
|
|
* Now try reading data bits. If the ack failed, we still
|
|
* need to clock through 16 cycles to keep the PHY(s) in sync.
|
|
*/
|
|
if (ack) {
|
|
for(i = 0; i < 16; i++) {
|
|
mx_mii_readbit(sc);
|
|
}
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
if (!ack) {
|
|
if (mx_mii_readbit(sc))
|
|
frame->mii_data |= i;
|
|
}
|
|
}
|
|
|
|
fail:
|
|
|
|
mx_mii_writebit(sc, 0);
|
|
mx_mii_writebit(sc, 0);
|
|
|
|
splx(s);
|
|
|
|
if (ack)
|
|
return(1);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Write to a PHY register through the MII.
|
|
*/
|
|
static int mx_mii_writereg(sc, frame)
|
|
struct mx_softc *sc;
|
|
struct mx_mii_frame *frame;
|
|
|
|
{
|
|
int s;
|
|
|
|
s = splimp();
|
|
/*
|
|
* Set up frame for TX.
|
|
*/
|
|
|
|
frame->mii_stdelim = MX_MII_STARTDELIM;
|
|
frame->mii_opcode = MX_MII_WRITEOP;
|
|
frame->mii_turnaround = MX_MII_TURNAROUND;
|
|
|
|
/*
|
|
* Sync the PHYs.
|
|
*/
|
|
mx_mii_sync(sc);
|
|
|
|
mx_mii_send(sc, frame->mii_stdelim, 2);
|
|
mx_mii_send(sc, frame->mii_opcode, 2);
|
|
mx_mii_send(sc, frame->mii_phyaddr, 5);
|
|
mx_mii_send(sc, frame->mii_regaddr, 5);
|
|
mx_mii_send(sc, frame->mii_turnaround, 2);
|
|
mx_mii_send(sc, frame->mii_data, 16);
|
|
|
|
/* Idle bit. */
|
|
mx_mii_writebit(sc, 0);
|
|
mx_mii_writebit(sc, 0);
|
|
|
|
splx(s);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static u_int16_t mx_phy_readreg(sc, reg)
|
|
struct mx_softc *sc;
|
|
int reg;
|
|
{
|
|
struct mx_mii_frame frame;
|
|
u_int32_t cfg;
|
|
|
|
bzero((char *)&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = sc->mx_phy_addr;
|
|
frame.mii_regaddr = reg;
|
|
cfg = CSR_READ_4(sc, MX_NETCFG);
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_PORTSEL);
|
|
mx_mii_readreg(sc, &frame);
|
|
CSR_WRITE_4(sc, MX_NETCFG, cfg);
|
|
|
|
return(frame.mii_data);
|
|
}
|
|
|
|
static void mx_phy_writereg(sc, reg, data)
|
|
struct mx_softc *sc;
|
|
int reg;
|
|
int data;
|
|
{
|
|
struct mx_mii_frame frame;
|
|
u_int32_t cfg;
|
|
|
|
bzero((char *)&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = sc->mx_phy_addr;
|
|
frame.mii_regaddr = reg;
|
|
frame.mii_data = data;
|
|
|
|
cfg = CSR_READ_4(sc, MX_NETCFG);
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_PORTSEL);
|
|
mx_mii_writereg(sc, &frame);
|
|
CSR_WRITE_4(sc, MX_NETCFG, cfg);
|
|
|
|
return;
|
|
}
|
|
|
|
#define MX_POLY 0xEDB88320
|
|
#define MX_BITS 9
|
|
|
|
static u_int32_t mx_calchash(addr)
|
|
caddr_t addr;
|
|
{
|
|
u_int32_t idx, bit, data, crc;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (idx = 0; idx < 6; idx++) {
|
|
for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
|
|
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? MX_POLY : 0);
|
|
}
|
|
|
|
return (crc & ((1 << MX_BITS) - 1));
|
|
}
|
|
|
|
/*
|
|
* Initiate an autonegotiation session.
|
|
*/
|
|
static void mx_autoneg_xmit(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
u_int16_t phy_sts;
|
|
|
|
mx_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET);
|
|
DELAY(500);
|
|
while(mx_phy_readreg(sc, PHY_BMCR)
|
|
& PHY_BMCR_RESET);
|
|
|
|
phy_sts = mx_phy_readreg(sc, PHY_BMCR);
|
|
phy_sts |= PHY_BMCR_AUTONEGENBL|PHY_BMCR_AUTONEGRSTR;
|
|
mx_phy_writereg(sc, PHY_BMCR, phy_sts);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Invoke autonegotiation on a PHY.
|
|
*/
|
|
static void mx_autoneg_mii(sc, flag, verbose)
|
|
struct mx_softc *sc;
|
|
int flag;
|
|
int verbose;
|
|
{
|
|
u_int16_t phy_sts = 0, media, advert, ability;
|
|
struct ifnet *ifp;
|
|
struct ifmedia *ifm;
|
|
|
|
ifm = &sc->ifmedia;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ifm->ifm_media = IFM_ETHER | IFM_AUTO;
|
|
|
|
/*
|
|
* The 100baseT4 PHY on the 3c905-T4 has the 'autoneg supported'
|
|
* bit cleared in the status register, but has the 'autoneg enabled'
|
|
* bit set in the control register. This is a contradiction, and
|
|
* I'm not sure how to handle it. If you want to force an attempt
|
|
* to autoneg for 100baseT4 PHYs, #define FORCE_AUTONEG_TFOUR
|
|
* and see what happens.
|
|
*/
|
|
#ifndef FORCE_AUTONEG_TFOUR
|
|
/*
|
|
* First, see if autoneg is supported. If not, there's
|
|
* no point in continuing.
|
|
*/
|
|
phy_sts = mx_phy_readreg(sc, PHY_BMSR);
|
|
if (!(phy_sts & PHY_BMSR_CANAUTONEG)) {
|
|
if (verbose)
|
|
printf("mx%d: autonegotiation not supported\n",
|
|
sc->mx_unit);
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
switch (flag) {
|
|
case MX_FLAG_FORCEDELAY:
|
|
/*
|
|
* XXX Never use this option anywhere but in the probe
|
|
* routine: making the kernel stop dead in its tracks
|
|
* for three whole seconds after we've gone multi-user
|
|
* is really bad manners.
|
|
*/
|
|
mx_autoneg_xmit(sc);
|
|
DELAY(5000000);
|
|
break;
|
|
case MX_FLAG_SCHEDDELAY:
|
|
/*
|
|
* Wait for the transmitter to go idle before starting
|
|
* an autoneg session, otherwise mx_start() may clobber
|
|
* our timeout, and we don't want to allow transmission
|
|
* during an autoneg session since that can screw it up.
|
|
*/
|
|
if (sc->mx_cdata.mx_tx_head != NULL) {
|
|
sc->mx_want_auto = 1;
|
|
return;
|
|
}
|
|
mx_autoneg_xmit(sc);
|
|
ifp->if_timer = 5;
|
|
sc->mx_autoneg = 1;
|
|
sc->mx_want_auto = 0;
|
|
return;
|
|
break;
|
|
case MX_FLAG_DELAYTIMEO:
|
|
ifp->if_timer = 0;
|
|
sc->mx_autoneg = 0;
|
|
break;
|
|
default:
|
|
printf("mx%d: invalid autoneg flag: %d\n", sc->mx_unit, flag);
|
|
return;
|
|
}
|
|
|
|
if (mx_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_AUTONEGCOMP) {
|
|
if (verbose)
|
|
printf("mx%d: autoneg complete, ", sc->mx_unit);
|
|
phy_sts = mx_phy_readreg(sc, PHY_BMSR);
|
|
} else {
|
|
if (verbose)
|
|
printf("mx%d: autoneg not complete, ", sc->mx_unit);
|
|
}
|
|
|
|
media = mx_phy_readreg(sc, PHY_BMCR);
|
|
|
|
/* Link is good. Report modes and set duplex mode. */
|
|
if (mx_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT) {
|
|
if (verbose)
|
|
printf("link status good ");
|
|
advert = mx_phy_readreg(sc, PHY_ANAR);
|
|
ability = mx_phy_readreg(sc, PHY_LPAR);
|
|
|
|
if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_T4;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(100baseT4)\n");
|
|
} else if (advert & PHY_ANAR_100BTXFULL &&
|
|
ability & PHY_ANAR_100BTXFULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media |= PHY_BMCR_DUPLEX;
|
|
printf("(full-duplex, 100Mbps)\n");
|
|
} else if (advert & PHY_ANAR_100BTXHALF &&
|
|
ability & PHY_ANAR_100BTXHALF) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(half-duplex, 100Mbps)\n");
|
|
} else if (advert & PHY_ANAR_10BTFULL &&
|
|
ability & PHY_ANAR_10BTFULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media |= PHY_BMCR_DUPLEX;
|
|
printf("(full-duplex, 10Mbps)\n");
|
|
} else if (advert & PHY_ANAR_10BTHALF &&
|
|
ability & PHY_ANAR_10BTHALF) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(half-duplex, 10Mbps)\n");
|
|
}
|
|
|
|
media &= ~PHY_BMCR_AUTONEGENBL;
|
|
|
|
/* Set ASIC's duplex mode to match the PHY. */
|
|
mx_setcfg(sc, media);
|
|
mx_phy_writereg(sc, PHY_BMCR, media);
|
|
} else {
|
|
if (verbose)
|
|
printf("no carrier\n");
|
|
}
|
|
|
|
mx_init(sc);
|
|
|
|
if (sc->mx_tx_pend) {
|
|
sc->mx_autoneg = 0;
|
|
sc->mx_tx_pend = 0;
|
|
mx_start(ifp);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Invoke autoneg using internal NWAY.
|
|
*/
|
|
static void mx_autoneg(sc, flag, verbose)
|
|
struct mx_softc *sc;
|
|
int flag;
|
|
int verbose;
|
|
{
|
|
u_int32_t media, ability;
|
|
struct ifnet *ifp;
|
|
struct ifmedia *ifm;
|
|
|
|
ifm = &sc->ifmedia;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ifm->ifm_media = IFM_ETHER | IFM_AUTO;
|
|
|
|
switch (flag) {
|
|
case MX_FLAG_FORCEDELAY:
|
|
/*
|
|
* XXX Never use this option anywhere but in the probe
|
|
* routine: making the kernel stop dead in its tracks
|
|
* for three whole seconds after we've gone multi-user
|
|
* is really bad manners.
|
|
*/
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_PORTSEL);
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_FULLDUPLEX);
|
|
MX_SETBIT(sc, MX_10BTCTRL, MX_TCTL_AUTONEGENBL);
|
|
MX_SETBIT(sc, MX_10BTCTRL, MX_ASTAT_TXDISABLE);
|
|
DELAY(5000000);
|
|
break;
|
|
case MX_FLAG_SCHEDDELAY:
|
|
/*
|
|
* Wait for the transmitter to go idle before starting
|
|
* an autoneg session, otherwise mx_start() may clobber
|
|
* our timeout, and we don't want to allow transmission
|
|
* during an autoneg session since that can screw it up.
|
|
*/
|
|
if (sc->mx_cdata.mx_tx_head != NULL) {
|
|
sc->mx_want_auto = 1;
|
|
return;
|
|
}
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_PORTSEL);
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_FULLDUPLEX);
|
|
MX_SETBIT(sc, MX_10BTCTRL, MX_TCTL_AUTONEGENBL);
|
|
MX_SETBIT(sc, MX_10BTCTRL, MX_ASTAT_TXDISABLE);
|
|
ifp->if_timer = 5;
|
|
sc->mx_autoneg = 1;
|
|
sc->mx_want_auto = 0;
|
|
return;
|
|
break;
|
|
case MX_FLAG_DELAYTIMEO:
|
|
ifp->if_timer = 0;
|
|
sc->mx_autoneg = 0;
|
|
break;
|
|
default:
|
|
printf("mx%d: invalid autoneg flag: %d\n", sc->mx_unit, flag);
|
|
return;
|
|
}
|
|
|
|
if ((CSR_READ_4(sc, MX_10BTSTAT) & MX_TSTAT_ANEGSTAT) ==
|
|
MX_ASTAT_AUTONEGCMP) {
|
|
if (verbose)
|
|
printf("mx%d: autoneg complete, ", sc->mx_unit);
|
|
} else {
|
|
if (verbose)
|
|
printf("mx%d: autoneg not complete, ", sc->mx_unit);
|
|
}
|
|
|
|
media = CSR_READ_4(sc, MX_NETCFG);
|
|
|
|
/* Link is good. Report modes and set duplex mode. */
|
|
if (!(CSR_READ_4(sc, MX_10BTSTAT) & MX_TSTAT_LS10) ||
|
|
!(CSR_READ_4(sc, MX_10BTSTAT) & MX_TSTAT_LS100)) {
|
|
if (verbose)
|
|
printf("link status good ");
|
|
ability = CSR_READ_4(sc, MX_NWAYSTAT);
|
|
if (ability & MX_NWAY_100BT4) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_T4;
|
|
media |= MX_NETCFG_PORTSEL|MX_NETCFG_PCS|
|
|
MX_NETCFG_SCRAMBLER;
|
|
media &= ~(MX_NETCFG_FULLDUPLEX|MX_NETCFG_SPEEDSEL);
|
|
printf("(100baseT4)\n");
|
|
} else if (ability & MX_NWAY_100BTFULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
media |= MX_NETCFG_PORTSEL|MX_NETCFG_PCS|
|
|
MX_NETCFG_SCRAMBLER;
|
|
media |= MX_NETCFG_FULLDUPLEX;
|
|
media &= ~MX_NETCFG_SPEEDSEL;
|
|
printf("(full-duplex, 100Mbps)\n");
|
|
} else if (ability & MX_NWAY_100BTHALF) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
media |= MX_NETCFG_PORTSEL|MX_NETCFG_PCS|
|
|
MX_NETCFG_SCRAMBLER;
|
|
media &= ~(MX_NETCFG_FULLDUPLEX|MX_NETCFG_SPEEDSEL);
|
|
printf("(half-duplex, 100Mbps)\n");
|
|
} else if (ability & MX_NWAY_10BTFULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
media &= ~MX_NETCFG_PORTSEL;
|
|
media |= (MX_NETCFG_FULLDUPLEX|MX_NETCFG_SPEEDSEL);
|
|
printf("(full-duplex, 10Mbps)\n");
|
|
} else {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
media &= ~MX_NETCFG_PORTSEL;
|
|
media &= ~MX_NETCFG_FULLDUPLEX;
|
|
media |= MX_NETCFG_SPEEDSEL;
|
|
printf("(half-duplex, 10Mbps)\n");
|
|
}
|
|
|
|
CSR_WRITE_4(sc, MX_NETCFG, media);
|
|
MX_CLRBIT(sc, MX_10BTCTRL, MX_TCTL_AUTONEGENBL);
|
|
} else {
|
|
if (verbose)
|
|
printf("no carrier\n");
|
|
}
|
|
|
|
mx_init(sc);
|
|
|
|
if (sc->mx_tx_pend) {
|
|
sc->mx_autoneg = 0;
|
|
sc->mx_tx_pend = 0;
|
|
mx_start(ifp);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void mx_getmode_mii(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
u_int16_t bmsr;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
bmsr = mx_phy_readreg(sc, PHY_BMSR);
|
|
if (bootverbose)
|
|
printf("mx%d: PHY status word: %x\n", sc->mx_unit, bmsr);
|
|
|
|
/* fallback */
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
|
|
if (bmsr & PHY_BMSR_10BTHALF) {
|
|
if (bootverbose)
|
|
printf("mx%d: 10Mbps half-duplex mode supported\n",
|
|
sc->mx_unit);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_10BTFULL) {
|
|
if (bootverbose)
|
|
printf("mx%d: 10Mbps full-duplex mode supported\n",
|
|
sc->mx_unit);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_100BTXHALF) {
|
|
if (bootverbose)
|
|
printf("mx%d: 100Mbps half-duplex mode supported\n",
|
|
sc->mx_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_HDX, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_100BTXFULL) {
|
|
if (bootverbose)
|
|
printf("mx%d: 100Mbps full-duplex mode supported\n",
|
|
sc->mx_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
}
|
|
|
|
/* Some also support 100BaseT4. */
|
|
if (bmsr & PHY_BMSR_100BT4) {
|
|
if (bootverbose)
|
|
printf("mx%d: 100baseT4 mode supported\n", sc->mx_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_T4, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_T4;
|
|
#ifdef FORCE_AUTONEG_TFOUR
|
|
if (bootverbose)
|
|
printf("mx%d: forcing on autoneg support for BT4\n",
|
|
sc->mx_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0 NULL):
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO;
|
|
#endif
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_CANAUTONEG) {
|
|
if (bootverbose)
|
|
printf("mx%d: autoneg supported\n", sc->mx_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set speed and duplex mode.
|
|
*/
|
|
static void mx_setmode_mii(sc, media)
|
|
struct mx_softc *sc;
|
|
int media;
|
|
{
|
|
u_int16_t bmcr;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/*
|
|
* If an autoneg session is in progress, stop it.
|
|
*/
|
|
if (sc->mx_autoneg) {
|
|
printf("mx%d: canceling autoneg session\n", sc->mx_unit);
|
|
ifp->if_timer = sc->mx_autoneg = sc->mx_want_auto = 0;
|
|
bmcr = mx_phy_readreg(sc, PHY_BMCR);
|
|
bmcr &= ~PHY_BMCR_AUTONEGENBL;
|
|
mx_phy_writereg(sc, PHY_BMCR, bmcr);
|
|
}
|
|
|
|
printf("mx%d: selecting MII, ", sc->mx_unit);
|
|
|
|
bmcr = mx_phy_readreg(sc, PHY_BMCR);
|
|
|
|
bmcr &= ~(PHY_BMCR_AUTONEGENBL|PHY_BMCR_SPEEDSEL|
|
|
PHY_BMCR_DUPLEX|PHY_BMCR_LOOPBK);
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_T4) {
|
|
printf("100Mbps/T4, half-duplex\n");
|
|
bmcr |= PHY_BMCR_SPEEDSEL;
|
|
bmcr &= ~PHY_BMCR_DUPLEX;
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_TX) {
|
|
printf("100Mbps, ");
|
|
bmcr |= PHY_BMCR_SPEEDSEL;
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_10_T) {
|
|
printf("10Mbps, ");
|
|
bmcr &= ~PHY_BMCR_SPEEDSEL;
|
|
}
|
|
|
|
if ((media & IFM_GMASK) == IFM_FDX) {
|
|
printf("full duplex\n");
|
|
bmcr |= PHY_BMCR_DUPLEX;
|
|
} else {
|
|
printf("half duplex\n");
|
|
bmcr &= ~PHY_BMCR_DUPLEX;
|
|
}
|
|
|
|
mx_setcfg(sc, bmcr);
|
|
mx_phy_writereg(sc, PHY_BMCR, bmcr);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set speed and duplex mode on internal transceiver.
|
|
*/
|
|
static void mx_setmode(sc, media, verbose)
|
|
struct mx_softc *sc;
|
|
int media;
|
|
int verbose;
|
|
{
|
|
struct ifnet *ifp;
|
|
u_int32_t mode;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/*
|
|
* If an autoneg session is in progress, stop it.
|
|
*/
|
|
if (sc->mx_autoneg) {
|
|
printf("mx%d: canceling autoneg session\n", sc->mx_unit);
|
|
ifp->if_timer = sc->mx_autoneg = sc->mx_want_auto = 0;
|
|
MX_CLRBIT(sc, MX_10BTCTRL, MX_TCTL_AUTONEGENBL);
|
|
}
|
|
|
|
if (verbose)
|
|
printf("mx%d: selecting NWAY, ", sc->mx_unit);
|
|
|
|
mode = CSR_READ_4(sc, MX_NETCFG);
|
|
|
|
mode &= ~(MX_NETCFG_FULLDUPLEX|MX_NETCFG_PORTSEL|
|
|
MX_NETCFG_PCS|MX_NETCFG_SCRAMBLER|MX_NETCFG_SPEEDSEL);
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_T4) {
|
|
if (verbose)
|
|
printf("100Mbps/T4, half-duplex\n");
|
|
mode |= MX_NETCFG_PORTSEL|MX_NETCFG_PCS|MX_NETCFG_SCRAMBLER;
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_TX) {
|
|
if (verbose)
|
|
printf("100Mbps, ");
|
|
mode |= MX_NETCFG_PORTSEL|MX_NETCFG_PCS|MX_NETCFG_SCRAMBLER;
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_10_T) {
|
|
if (verbose)
|
|
printf("10Mbps, ");
|
|
mode &= ~MX_NETCFG_PORTSEL;
|
|
mode |= MX_NETCFG_SPEEDSEL;
|
|
}
|
|
|
|
if ((media & IFM_GMASK) == IFM_FDX) {
|
|
if (verbose)
|
|
printf("full duplex\n");
|
|
mode |= MX_NETCFG_FULLDUPLEX;
|
|
} else {
|
|
if (verbose)
|
|
printf("half duplex\n");
|
|
mode &= ~MX_NETCFG_FULLDUPLEX;
|
|
}
|
|
|
|
CSR_WRITE_4(sc, MX_NETCFG, mode);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Programming the receiver filter on the tulip/PMAC is gross. You
|
|
* have to construct a special setup frame and download it to the
|
|
* chip via the transmit DMA engine. This routine is also somewhat
|
|
* gross, as the setup frame is sent synchronously rather than putting
|
|
* on the transmit queue. The transmitter has to be stopped, then we
|
|
* can download the frame and wait for the 'owned' bit to clear.
|
|
*
|
|
* We always program the chip using 'hash perfect' mode, i.e. one perfect
|
|
* address (our node address) and a 512-bit hash filter for multicast
|
|
* frames. We also sneak the broadcast address into the hash filter since
|
|
* we need that too.
|
|
*/
|
|
void mx_setfilt(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
struct mx_desc *sframe;
|
|
u_int32_t h, *sp;
|
|
struct ifmultiaddr *ifma;
|
|
struct ifnet *ifp;
|
|
int i;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_TX_ON);
|
|
MX_SETBIT(sc, MX_ISR, MX_ISR_TX_IDLE);
|
|
|
|
sframe = &sc->mx_cdata.mx_sframe;
|
|
sp = (u_int32_t *)&sc->mx_cdata.mx_sbuf;
|
|
bzero((char *)sp, MX_SFRAME_LEN);
|
|
|
|
sframe->mx_next = vtophys(&sc->mx_ldata->mx_tx_list[0]);
|
|
sframe->mx_data = vtophys(&sc->mx_cdata.mx_sbuf);
|
|
sframe->mx_ctl = MX_SFRAME_LEN | MX_TXCTL_TLINK |
|
|
MX_TXCTL_SETUP | MX_FILTER_HASHPERF;
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_RX_PROMISC);
|
|
else
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_RX_PROMISC);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI)
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_RX_ALLMULTI);
|
|
|
|
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
|
|
ifma = ifma->ifma_link.le_next) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = mx_calchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
sp[h >> 4] |= 1 << (h & 0xF);
|
|
}
|
|
|
|
if (ifp->if_flags & IFF_BROADCAST) {
|
|
h = mx_calchash((caddr_t)ðerbroadcastaddr);
|
|
sp[h >> 4] |= 1 << (h & 0xF);
|
|
}
|
|
|
|
sp[39] = ((u_int16_t *)sc->arpcom.ac_enaddr)[0];
|
|
sp[40] = ((u_int16_t *)sc->arpcom.ac_enaddr)[1];
|
|
sp[41] = ((u_int16_t *)sc->arpcom.ac_enaddr)[2];
|
|
|
|
CSR_WRITE_4(sc, MX_TXADDR, vtophys(sframe));
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_TX_ON);
|
|
sframe->mx_status = MX_TXSTAT_OWN;
|
|
CSR_WRITE_4(sc, MX_TXSTART, 0xFFFFFFFF);
|
|
|
|
/*
|
|
* Wait for chip to clear the 'own' bit.
|
|
*/
|
|
for (i = 0; i < MX_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (sframe->mx_status != MX_TXSTAT_OWN)
|
|
break;
|
|
}
|
|
|
|
if (i == MX_TIMEOUT)
|
|
printf("mx%d: failed to send setup frame\n", sc->mx_unit);
|
|
|
|
MX_SETBIT(sc, MX_ISR, MX_ISR_TX_NOBUF|MX_ISR_TX_IDLE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* In order to fiddle with the
|
|
* 'full-duplex' and '100Mbps' bits in the netconfig register, we
|
|
* first have to put the transmit and/or receive logic in the idle state.
|
|
*/
|
|
static void mx_setcfg(sc, bmcr)
|
|
struct mx_softc *sc;
|
|
int bmcr;
|
|
{
|
|
int i, restart = 0;
|
|
|
|
if (CSR_READ_4(sc, MX_NETCFG) & (MX_NETCFG_TX_ON|MX_NETCFG_RX_ON)) {
|
|
restart = 1;
|
|
MX_CLRBIT(sc, MX_NETCFG, (MX_NETCFG_TX_ON|MX_NETCFG_RX_ON));
|
|
|
|
for (i = 0; i < MX_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (CSR_READ_4(sc, MX_ISR) & MX_ISR_TX_IDLE)
|
|
break;
|
|
}
|
|
|
|
if (i == MX_TIMEOUT)
|
|
printf("mx%d: failed to force tx and "
|
|
"rx to idle state\n", sc->mx_unit);
|
|
|
|
}
|
|
|
|
if (bmcr & PHY_BMCR_SPEEDSEL) {
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_SPEEDSEL);
|
|
if (sc->mx_phy_addr == 0) {
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_PORTSEL|
|
|
MX_NETCFG_PCS|MX_NETCFG_SCRAMBLER);
|
|
}
|
|
} else
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_SPEEDSEL);
|
|
|
|
if (bmcr & PHY_BMCR_DUPLEX)
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_FULLDUPLEX);
|
|
else
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_FULLDUPLEX);
|
|
|
|
if (restart)
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_TX_ON|MX_NETCFG_RX_ON);
|
|
|
|
return;
|
|
}
|
|
|
|
static void mx_reset(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
MX_SETBIT(sc, MX_BUSCTL, MX_BUSCTL_RESET);
|
|
|
|
for (i = 0; i < MX_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_4(sc, MX_BUSCTL) & MX_BUSCTL_RESET))
|
|
break;
|
|
}
|
|
if (i == MX_TIMEOUT)
|
|
printf("mx%d: reset never completed!\n", sc->mx_unit);
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(1000);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Probe for a Macronix PMAC chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
* We do a little bit of extra work to identify the exact type of
|
|
* chip. The MX98713 and MX98713A have the same PCI vendor/device ID,
|
|
* but different revision IDs. The same is true for 98715/98715A
|
|
* chips and the 98725. This doesn't affect a whole lot, but it
|
|
* lets us tell the user exactly what type of device they have
|
|
* in the probe output.
|
|
*/
|
|
static const char *
|
|
mx_probe(config_id, device_id)
|
|
pcici_t config_id;
|
|
pcidi_t device_id;
|
|
{
|
|
struct mx_type *t;
|
|
u_int32_t rev;
|
|
|
|
t = mx_devs;
|
|
|
|
while(t->mx_name != NULL) {
|
|
if ((device_id & 0xFFFF) == t->mx_vid &&
|
|
((device_id >> 16) & 0xFFFF) == t->mx_did) {
|
|
/* Check the PCI revision */
|
|
rev = pci_conf_read(config_id, MX_PCI_REVID) & 0xFF;
|
|
if (t->mx_did == MX_DEVICEID_98713 &&
|
|
rev >= MX_REVISION_98713A)
|
|
t++;
|
|
if (t->mx_did == MX_DEVICEID_987x5 &&
|
|
rev >= MX_REVISION_98725)
|
|
t++;
|
|
return(t->mx_name);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(NULL);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static void
|
|
mx_attach(config_id, unit)
|
|
pcici_t config_id;
|
|
int unit;
|
|
{
|
|
int s, i;
|
|
#ifndef MX_USEIOSPACE
|
|
vm_offset_t pbase, vbase;
|
|
#endif
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
u_int32_t command;
|
|
struct mx_softc *sc;
|
|
struct ifnet *ifp;
|
|
int media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
unsigned int round;
|
|
caddr_t roundptr;
|
|
struct mx_type *p;
|
|
u_int16_t phy_vid, phy_did, phy_sts, mac_offset = 0;
|
|
u_int32_t revision, pci_id;
|
|
|
|
s = splimp();
|
|
|
|
sc = malloc(sizeof(struct mx_softc), M_DEVBUF, M_NOWAIT);
|
|
if (sc == NULL) {
|
|
printf("mx%d: no memory for softc struct!\n", unit);
|
|
goto fail;
|
|
}
|
|
bzero(sc, sizeof(struct mx_softc));
|
|
|
|
/*
|
|
* Handle power management nonsense.
|
|
*/
|
|
|
|
command = pci_conf_read(config_id, MX_PCI_CAPID) & 0x000000FF;
|
|
if (command == 0x01) {
|
|
|
|
command = pci_conf_read(config_id, MX_PCI_PWRMGMTCTRL);
|
|
if (command & MX_PSTATE_MASK) {
|
|
u_int32_t iobase, membase, irq;
|
|
|
|
/* Save important PCI config data. */
|
|
iobase = pci_conf_read(config_id, MX_PCI_LOIO);
|
|
membase = pci_conf_read(config_id, MX_PCI_LOMEM);
|
|
irq = pci_conf_read(config_id, MX_PCI_INTLINE);
|
|
|
|
/* Reset the power state. */
|
|
printf("mx%d: chip is in D%d power mode "
|
|
"-- setting to D0\n", unit, command & MX_PSTATE_MASK);
|
|
command &= 0xFFFFFFFC;
|
|
pci_conf_write(config_id, MX_PCI_PWRMGMTCTRL, command);
|
|
|
|
/* Restore PCI config data. */
|
|
pci_conf_write(config_id, MX_PCI_LOIO, iobase);
|
|
pci_conf_write(config_id, MX_PCI_LOMEM, membase);
|
|
pci_conf_write(config_id, MX_PCI_INTLINE, irq);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
command = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG);
|
|
command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
|
|
pci_conf_write(config_id, PCI_COMMAND_STATUS_REG, command);
|
|
command = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG);
|
|
|
|
#ifdef MX_USEIOSPACE
|
|
if (!(command & PCIM_CMD_PORTEN)) {
|
|
printf("mx%d: failed to enable I/O ports!\n", unit);
|
|
free(sc, M_DEVBUF);
|
|
goto fail;
|
|
}
|
|
|
|
if (!pci_map_port(config_id, MX_PCI_LOIO,
|
|
(u_short *)&(sc->mx_bhandle))) {
|
|
printf ("mx%d: couldn't map ports\n", unit);
|
|
goto fail;
|
|
}
|
|
#ifdef __i386__
|
|
sc->mx_btag = I386_BUS_SPACE_IO;
|
|
#endif
|
|
#ifdef __alpha__
|
|
sc->mx_btag = ALPHA_BUS_SPACE_IO;
|
|
#endif
|
|
#else
|
|
if (!(command & PCIM_CMD_MEMEN)) {
|
|
printf("mx%d: failed to enable memory mapping!\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
if (!pci_map_mem(config_id, MX_PCI_LOMEM, &vbase, &pbase)) {
|
|
printf ("mx%d: couldn't map memory\n", unit);
|
|
goto fail;
|
|
}
|
|
#ifdef __i386__
|
|
sc->mx_btag = I386_BUS_SPACE_MEM;
|
|
#endif
|
|
#ifdef __alpha__
|
|
sc->mx_btag = ALPHA_BUS_SPACE_MEM;
|
|
#endif
|
|
sc->mx_bhandle = vbase;
|
|
#endif
|
|
|
|
/* Allocate interrupt */
|
|
if (!pci_map_int(config_id, mx_intr, sc, &net_imask)) {
|
|
printf("mx%d: couldn't map interrupt\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
/* Need this info to decide on a chip type. */
|
|
revision = pci_conf_read(config_id, MX_PCI_REVID) & 0x000000FF;
|
|
pci_id = (pci_conf_read(config_id,MX_PCI_VENDOR_ID) >> 16) & 0x0000FFFF;
|
|
|
|
if (pci_id == MX_DEVICEID_98713 && revision < MX_REVISION_98713A)
|
|
sc->mx_type = MX_TYPE_98713;
|
|
else if (pci_id == MX_DEVICEID_98713 && revision >= MX_REVISION_98713A)
|
|
sc->mx_type = MX_TYPE_98713A;
|
|
else
|
|
sc->mx_type = MX_TYPE_987x5;
|
|
|
|
/* Reset the adapter. */
|
|
mx_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
mx_read_eeprom(sc, (caddr_t)&mac_offset,
|
|
(MX_EE_NODEADDR_OFFSET / 2), 1, 0);
|
|
mx_read_eeprom(sc, (caddr_t)&eaddr, (mac_offset / 2), 3, 0);
|
|
|
|
/*
|
|
* A PMAC chip was detected. Inform the world.
|
|
*/
|
|
printf("mx%d: Ethernet address: %6D\n", unit, eaddr, ":");
|
|
|
|
sc->mx_unit = unit;
|
|
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
|
|
sc->mx_ldata_ptr = malloc(sizeof(struct mx_list_data) + 8,
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (sc->mx_ldata_ptr == NULL) {
|
|
free(sc, M_DEVBUF);
|
|
printf("mx%d: no memory for list buffers!\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
sc->mx_ldata = (struct mx_list_data *)sc->mx_ldata_ptr;
|
|
round = (unsigned int)sc->mx_ldata_ptr & 0xF;
|
|
roundptr = sc->mx_ldata_ptr;
|
|
for (i = 0; i < 8; i++) {
|
|
if (round % 8) {
|
|
round++;
|
|
roundptr++;
|
|
}
|
|
break;
|
|
}
|
|
sc->mx_ldata = (struct mx_list_data *)roundptr;
|
|
bzero(sc->mx_ldata, sizeof(struct mx_list_data));
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "mx";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = mx_ioctl;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = mx_start;
|
|
ifp->if_watchdog = mx_watchdog;
|
|
ifp->if_init = mx_init;
|
|
ifp->if_baudrate = 10000000;
|
|
ifp->if_snd.ifq_maxlen = MX_TX_LIST_CNT - 1;
|
|
|
|
if (sc->mx_type == MX_TYPE_98713) {
|
|
if (bootverbose)
|
|
printf("mx%d: probing for a PHY\n", sc->mx_unit);
|
|
for (i = MX_PHYADDR_MIN; i < MX_PHYADDR_MAX + 1; i++) {
|
|
if (bootverbose)
|
|
printf("mx%d: checking address: %d\n",
|
|
sc->mx_unit, i);
|
|
sc->mx_phy_addr = i;
|
|
mx_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET);
|
|
DELAY(500);
|
|
while(mx_phy_readreg(sc, PHY_BMCR)
|
|
& PHY_BMCR_RESET);
|
|
if ((phy_sts = mx_phy_readreg(sc, PHY_BMSR)))
|
|
break;
|
|
}
|
|
if (phy_sts) {
|
|
phy_vid = mx_phy_readreg(sc, PHY_VENID);
|
|
phy_did = mx_phy_readreg(sc, PHY_DEVID);
|
|
if (bootverbose)
|
|
printf("mx%d: found PHY at address %d, ",
|
|
sc->mx_unit, sc->mx_phy_addr);
|
|
if (bootverbose)
|
|
printf("vendor id: %x device id: %x\n",
|
|
phy_vid, phy_did);
|
|
p = mx_phys;
|
|
while(p->mx_vid) {
|
|
if (phy_vid == p->mx_vid &&
|
|
(phy_did | 0x000F) == p->mx_did) {
|
|
sc->mx_pinfo = p;
|
|
break;
|
|
}
|
|
p++;
|
|
}
|
|
if (sc->mx_pinfo == NULL)
|
|
sc->mx_pinfo = &mx_phys[PHY_UNKNOWN];
|
|
if (bootverbose)
|
|
printf("mx%d: PHY type: %s\n",
|
|
sc->mx_unit, sc->mx_pinfo->mx_name);
|
|
} else {
|
|
#ifdef DIAGNOSTIC
|
|
printf("mx%d: MII without any phy!\n", sc->mx_unit);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Do ifmedia setup.
|
|
*/
|
|
ifmedia_init(&sc->ifmedia, 0, mx_ifmedia_upd, mx_ifmedia_sts);
|
|
|
|
if (sc->mx_type == MX_TYPE_98713 && sc->mx_pinfo != NULL) {
|
|
mx_getmode_mii(sc);
|
|
mx_autoneg_mii(sc, MX_FLAG_FORCEDELAY, 1);
|
|
} else {
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_HDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
mx_autoneg(sc, MX_FLAG_FORCEDELAY, 1);
|
|
}
|
|
|
|
media = sc->ifmedia.ifm_media;
|
|
mx_stop(sc);
|
|
|
|
ifmedia_set(&sc->ifmedia, media);
|
|
|
|
/*
|
|
* Call MI attach routines.
|
|
*/
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
|
|
#if NBPFILTER > 0
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
#endif
|
|
at_shutdown(mx_shutdown, sc, SHUTDOWN_POST_SYNC);
|
|
|
|
fail:
|
|
splx(s);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int mx_list_tx_init(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
struct mx_chain_data *cd;
|
|
struct mx_list_data *ld;
|
|
int i;
|
|
|
|
cd = &sc->mx_cdata;
|
|
ld = sc->mx_ldata;
|
|
for (i = 0; i < MX_TX_LIST_CNT; i++) {
|
|
cd->mx_tx_chain[i].mx_ptr = &ld->mx_tx_list[i];
|
|
if (i == (MX_TX_LIST_CNT - 1))
|
|
cd->mx_tx_chain[i].mx_nextdesc =
|
|
&cd->mx_tx_chain[0];
|
|
else
|
|
cd->mx_tx_chain[i].mx_nextdesc =
|
|
&cd->mx_tx_chain[i + 1];
|
|
}
|
|
|
|
cd->mx_tx_free = &cd->mx_tx_chain[0];
|
|
cd->mx_tx_tail = cd->mx_tx_head = NULL;
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them. Note that
|
|
* we arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int mx_list_rx_init(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
struct mx_chain_data *cd;
|
|
struct mx_list_data *ld;
|
|
int i;
|
|
|
|
cd = &sc->mx_cdata;
|
|
ld = sc->mx_ldata;
|
|
|
|
for (i = 0; i < MX_RX_LIST_CNT; i++) {
|
|
cd->mx_rx_chain[i].mx_ptr =
|
|
(volatile struct mx_desc *)&ld->mx_rx_list[i];
|
|
if (mx_newbuf(sc, &cd->mx_rx_chain[i]) == ENOBUFS)
|
|
return(ENOBUFS);
|
|
if (i == (MX_RX_LIST_CNT - 1)) {
|
|
cd->mx_rx_chain[i].mx_nextdesc = &cd->mx_rx_chain[0];
|
|
ld->mx_rx_list[i].mx_next =
|
|
vtophys(&ld->mx_rx_list[0]);
|
|
} else {
|
|
cd->mx_rx_chain[i].mx_nextdesc = &cd->mx_rx_chain[i + 1];
|
|
ld->mx_rx_list[i].mx_next =
|
|
vtophys(&ld->mx_rx_list[i + 1]);
|
|
}
|
|
}
|
|
|
|
cd->mx_rx_head = &cd->mx_rx_chain[0];
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
* Note: the length fields are only 11 bits wide, which means the
|
|
* largest size we can specify is 2047. This is important because
|
|
* MCLBYTES is 2048, so we have to subtract one otherwise we'll
|
|
* overflow the field and make a mess.
|
|
*/
|
|
static int mx_newbuf(sc, c)
|
|
struct mx_softc *sc;
|
|
struct mx_chain_onefrag *c;
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("mx%d: no memory for rx list -- packet dropped!\n",
|
|
sc->mx_unit);
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
printf("mx%d: no memory for rx list -- packet dropped!\n",
|
|
sc->mx_unit);
|
|
m_freem(m_new);
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
c->mx_mbuf = m_new;
|
|
c->mx_ptr->mx_status = MX_RXSTAT;
|
|
c->mx_ptr->mx_data = vtophys(mtod(m_new, caddr_t));
|
|
c->mx_ptr->mx_ctl = MX_RXCTL_RLINK | (MCLBYTES - 1);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static void mx_rxeof(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct mx_chain_onefrag *cur_rx;
|
|
int total_len = 0;
|
|
u_int32_t rxstat;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
while(!((rxstat = sc->mx_cdata.mx_rx_head->mx_ptr->mx_status) &
|
|
MX_RXSTAT_OWN)) {
|
|
#ifdef __alpha__
|
|
struct mbuf *m0 = NULL;
|
|
#endif
|
|
cur_rx = sc->mx_cdata.mx_rx_head;
|
|
sc->mx_cdata.mx_rx_head = cur_rx->mx_nextdesc;
|
|
|
|
/*
|
|
* If an error occurs, update stats, clear the
|
|
* status word and leave the mbuf cluster in place:
|
|
* it should simply get re-used next time this descriptor
|
|
* comes up in the ring.
|
|
*/
|
|
if (rxstat & MX_RXSTAT_RXERR) {
|
|
ifp->if_ierrors++;
|
|
if (rxstat & MX_RXSTAT_COLLSEEN)
|
|
ifp->if_collisions++;
|
|
cur_rx->mx_ptr->mx_status = MX_RXSTAT;
|
|
cur_rx->mx_ptr->mx_ctl =
|
|
MX_RXCTL_RLINK | (MCLBYTES - 1);
|
|
continue;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
m = cur_rx->mx_mbuf;
|
|
total_len = MX_RXBYTES(cur_rx->mx_ptr->mx_status);
|
|
|
|
/*
|
|
* XXX The Macronix chips includes the CRC with every
|
|
* received frame, and there's no way to turn this
|
|
* behavior off (at least, I can't find anything in
|
|
* the manual that explains how to do it) so we have
|
|
* to trim off the CRC manually.
|
|
*/
|
|
total_len -= ETHER_CRC_LEN;
|
|
|
|
/*
|
|
* Try to conjure up a new mbuf cluster. If that
|
|
* fails, it means we have an out of memory condition and
|
|
* should leave the buffer in place and continue. This will
|
|
* result in a lost packet, but there's little else we
|
|
* can do in this situation.
|
|
*/
|
|
if (mx_newbuf(sc, cur_rx) == ENOBUFS) {
|
|
ifp->if_ierrors++;
|
|
cur_rx->mx_ptr->mx_status = MX_RXSTAT;
|
|
cur_rx->mx_ptr->mx_ctl =
|
|
MX_RXCTL_RLINK | (MCLBYTES - 1);
|
|
continue;
|
|
}
|
|
|
|
#ifdef __alpha__
|
|
/*
|
|
* Deal with alignment on alpha.
|
|
*/
|
|
MGETHDR(m0, M_DONTWAIT, MT_DATA);
|
|
if (m0 == NULL) {
|
|
ifp->if_ierrors++;
|
|
cur_rx->mx_ptr->mx_status = MX_RXSTAT;
|
|
cur_rx->mx_ptr->mx_ctl =
|
|
MX_RXCTL_RLINK | (MCLBYTES - 1);
|
|
bzero((char *)mtod(cur_rx->mx_mbuf, char *), MCLBYTES);
|
|
continue;
|
|
}
|
|
|
|
m0->m_data += 2;
|
|
if (total_len <= (MHLEN - 2)) {
|
|
bcopy(mtod(m, caddr_t), mtod(m0, caddr_t), total_len); m_freem(m);
|
|
m = m0;
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
} else {
|
|
bcopy(mtod(m, caddr_t), mtod(m0, caddr_t), (MHLEN - 2));
|
|
m->m_len = total_len - (MHLEN - 2);
|
|
m->m_data += (MHLEN - 2);
|
|
m0->m_next = m;
|
|
m0->m_len = (MHLEN - 2);
|
|
m = m0;
|
|
m->m_pkthdr.len = total_len;
|
|
}
|
|
#else
|
|
m->m_pkthdr.len = m->m_len = total_len;
|
|
#endif
|
|
ifp->if_ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Handle BPF listeners. Let the BPF user see the packet, but
|
|
* don't pass it up to the ether_input() layer unless it's
|
|
* a broadcast packet, multicast packet, matches our ethernet
|
|
* address or the interface is in promiscuous mode.
|
|
*/
|
|
if (ifp->if_bpf) {
|
|
bpf_mtap(ifp, m);
|
|
if (ifp->if_flags & IFF_PROMISC &&
|
|
(bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
|
|
ETHER_ADDR_LEN) &&
|
|
(eh->ether_dhost[0] & 1) == 0)) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
}
|
|
#endif
|
|
/* Remove header from mbuf and pass it on. */
|
|
m_adj(m, sizeof(struct ether_header));
|
|
ether_input(ifp, eh, m);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
void mx_rxeoc(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
|
|
mx_rxeof(sc);
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_RX_ON);
|
|
CSR_WRITE_4(sc, MX_RXADDR, vtophys(sc->mx_cdata.mx_rx_head->mx_ptr));
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_RX_ON);
|
|
CSR_WRITE_4(sc, MX_RXSTART, 0xFFFFFFFF);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
static void mx_txeof(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
struct mx_chain *cur_tx;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Clear the timeout timer. */
|
|
ifp->if_timer = 0;
|
|
|
|
if (sc->mx_cdata.mx_tx_head == NULL)
|
|
return;
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
while(sc->mx_cdata.mx_tx_head->mx_mbuf != NULL) {
|
|
u_int32_t txstat;
|
|
|
|
cur_tx = sc->mx_cdata.mx_tx_head;
|
|
txstat = MX_TXSTATUS(cur_tx);
|
|
|
|
if ((txstat & MX_TXSTAT_OWN) || MX_TXOWN(cur_tx) == MX_UNSENT)
|
|
break;
|
|
|
|
if (txstat & MX_TXSTAT_ERRSUM) {
|
|
ifp->if_oerrors++;
|
|
if (txstat & MX_TXSTAT_EXCESSCOLL)
|
|
ifp->if_collisions++;
|
|
if (txstat & MX_TXSTAT_LATECOLL)
|
|
ifp->if_collisions++;
|
|
}
|
|
|
|
ifp->if_collisions += (txstat & MX_TXSTAT_COLLCNT) >> 3;
|
|
|
|
ifp->if_opackets++;
|
|
m_freem(cur_tx->mx_mbuf);
|
|
cur_tx->mx_mbuf = NULL;
|
|
|
|
if (sc->mx_cdata.mx_tx_head == sc->mx_cdata.mx_tx_tail) {
|
|
sc->mx_cdata.mx_tx_head = NULL;
|
|
sc->mx_cdata.mx_tx_tail = NULL;
|
|
break;
|
|
}
|
|
|
|
sc->mx_cdata.mx_tx_head = cur_tx->mx_nextdesc;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* TX 'end of channel' interrupt handler.
|
|
*/
|
|
static void mx_txeoc(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ifp->if_timer = 0;
|
|
|
|
if (sc->mx_cdata.mx_tx_head == NULL) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
sc->mx_cdata.mx_tx_tail = NULL;
|
|
if (sc->mx_want_auto) {
|
|
if (sc->mx_type == MX_TYPE_98713 &&
|
|
sc->mx_pinfo != NULL)
|
|
mx_autoneg_mii(sc, MX_FLAG_DELAYTIMEO, 1);
|
|
else
|
|
mx_autoneg(sc, MX_FLAG_DELAYTIMEO, 1);
|
|
}
|
|
} else {
|
|
if (MX_TXOWN(sc->mx_cdata.mx_tx_head) == MX_UNSENT) {
|
|
MX_TXOWN(sc->mx_cdata.mx_tx_head) = MX_TXSTAT_OWN;
|
|
ifp->if_timer = 5;
|
|
CSR_WRITE_4(sc, MX_TXSTART, 0xFFFFFFFF);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void mx_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct mx_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int32_t status;
|
|
|
|
sc = arg;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Supress unwanted interrupts */
|
|
if (!(ifp->if_flags & IFF_UP)) {
|
|
mx_stop(sc);
|
|
return;
|
|
}
|
|
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_4(sc, MX_IMR, 0x00000000);
|
|
|
|
for (;;) {
|
|
status = CSR_READ_4(sc, MX_ISR);
|
|
if (status)
|
|
CSR_WRITE_4(sc, MX_ISR, status);
|
|
|
|
if ((status & MX_INTRS) == 0)
|
|
break;
|
|
|
|
if (status & MX_ISR_TX_OK)
|
|
mx_txeof(sc);
|
|
|
|
if (status & MX_ISR_TX_NOBUF)
|
|
mx_txeoc(sc);
|
|
|
|
if (status & MX_ISR_TX_IDLE) {
|
|
mx_txeof(sc);
|
|
if (sc->mx_cdata.mx_tx_head != NULL) {
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_TX_ON);
|
|
CSR_WRITE_4(sc, MX_TXSTART, 0xFFFFFFFF);
|
|
}
|
|
}
|
|
|
|
if (status & MX_ISR_TX_UNDERRUN) {
|
|
u_int32_t cfg;
|
|
cfg = CSR_READ_4(sc, MX_NETCFG);
|
|
if ((cfg & MX_NETCFG_TX_THRESH) == MX_TXTHRESH_160BYTES)
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_STORENFWD);
|
|
else
|
|
CSR_WRITE_4(sc, MX_NETCFG, cfg + 0x4000);
|
|
}
|
|
|
|
if (status & MX_ISR_RX_OK)
|
|
mx_rxeof(sc);
|
|
|
|
if ((status & MX_ISR_RX_WATDOGTIMEO)
|
|
|| (status & MX_ISR_RX_NOBUF))
|
|
mx_rxeoc(sc);
|
|
|
|
if (status & MX_ISR_BUS_ERR) {
|
|
mx_reset(sc);
|
|
mx_init(sc);
|
|
}
|
|
}
|
|
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, MX_IMR, MX_INTRS);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL) {
|
|
mx_start(ifp);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int mx_encap(sc, c, m_head)
|
|
struct mx_softc *sc;
|
|
struct mx_chain *c;
|
|
struct mbuf *m_head;
|
|
{
|
|
int frag = 0;
|
|
volatile struct mx_desc *f = NULL;
|
|
int total_len;
|
|
struct mbuf *m;
|
|
|
|
/*
|
|
* Start packing the mbufs in this chain into
|
|
* the fragment pointers. Stop when we run out
|
|
* of fragments or hit the end of the mbuf chain.
|
|
*/
|
|
m = m_head;
|
|
total_len = 0;
|
|
|
|
for (m = m_head, frag = 0; m != NULL; m = m->m_next) {
|
|
if (m->m_len != 0) {
|
|
if (frag == MX_MAXFRAGS)
|
|
break;
|
|
total_len += m->m_len;
|
|
f = &c->mx_ptr->mx_frag[frag];
|
|
f->mx_ctl = MX_TXCTL_TLINK | m->m_len;
|
|
if (frag == 0) {
|
|
f->mx_status = 0;
|
|
f->mx_ctl |= MX_TXCTL_FIRSTFRAG;
|
|
} else
|
|
f->mx_status = MX_TXSTAT_OWN;
|
|
f->mx_next = vtophys(&c->mx_ptr->mx_frag[frag + 1]);
|
|
f->mx_data = vtophys(mtod(m, vm_offset_t));
|
|
frag++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle special case: we ran out of fragments,
|
|
* but we have more mbufs left in the chain. Copy the
|
|
* data into an mbuf cluster. Note that we don't
|
|
* bother clearing the values in the other fragment
|
|
* pointers/counters; it wouldn't gain us anything,
|
|
* and would waste cycles.
|
|
*/
|
|
if (m != NULL) {
|
|
struct mbuf *m_new = NULL;
|
|
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("mx%d: no memory for tx list", sc->mx_unit);
|
|
return(1);
|
|
}
|
|
if (m_head->m_pkthdr.len > MHLEN) {
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
m_freem(m_new);
|
|
printf("mx%d: no memory for tx list",
|
|
sc->mx_unit);
|
|
return(1);
|
|
}
|
|
}
|
|
m_copydata(m_head, 0, m_head->m_pkthdr.len,
|
|
mtod(m_new, caddr_t));
|
|
m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
|
|
m_freem(m_head);
|
|
m_head = m_new;
|
|
f = &c->mx_ptr->mx_frag[0];
|
|
f->mx_status = 0;
|
|
f->mx_data = vtophys(mtod(m_new, caddr_t));
|
|
f->mx_ctl = total_len = m_new->m_len;
|
|
f->mx_ctl |= MX_TXCTL_TLINK|MX_TXCTL_FIRSTFRAG;
|
|
frag = 1;
|
|
}
|
|
|
|
|
|
if (total_len < MX_MIN_FRAMELEN) {
|
|
f = &c->mx_ptr->mx_frag[frag];
|
|
f->mx_ctl = MX_MIN_FRAMELEN - total_len;
|
|
f->mx_data = vtophys(&sc->mx_cdata.mx_pad);
|
|
f->mx_ctl |= MX_TXCTL_TLINK;
|
|
f->mx_status = MX_TXSTAT_OWN;
|
|
frag++;
|
|
}
|
|
|
|
c->mx_mbuf = m_head;
|
|
c->mx_lastdesc = frag - 1;
|
|
MX_TXCTL(c) |= MX_TXCTL_LASTFRAG;
|
|
MX_TXNEXT(c) = vtophys(&c->mx_nextdesc->mx_ptr->mx_frag[0]);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit lists. We also save a
|
|
* copy of the pointers since the transmit list fragment pointers are
|
|
* physical addresses.
|
|
*/
|
|
|
|
static void mx_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct mx_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
struct mx_chain *cur_tx = NULL, *start_tx;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
if (sc->mx_autoneg) {
|
|
sc->mx_tx_pend = 1;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Check for an available queue slot. If there are none,
|
|
* punt.
|
|
*/
|
|
if (sc->mx_cdata.mx_tx_free->mx_mbuf != NULL) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
|
|
start_tx = sc->mx_cdata.mx_tx_free;
|
|
|
|
while(sc->mx_cdata.mx_tx_free->mx_mbuf == NULL) {
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/* Pick a descriptor off the free list. */
|
|
cur_tx = sc->mx_cdata.mx_tx_free;
|
|
sc->mx_cdata.mx_tx_free = cur_tx->mx_nextdesc;
|
|
|
|
/* Pack the data into the descriptor. */
|
|
mx_encap(sc, cur_tx, m_head);
|
|
if (cur_tx != start_tx)
|
|
MX_TXOWN(cur_tx) = MX_TXSTAT_OWN;
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, cur_tx->mx_mbuf);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* If there are no frames queued, bail.
|
|
*/
|
|
if (cur_tx == NULL)
|
|
return;
|
|
|
|
/*
|
|
* Place the request for the upload interrupt
|
|
* in the last descriptor in the chain. This way, if
|
|
* we're chaining several packets at once, we'll only
|
|
* get an interupt once for the whole chain rather than
|
|
* once for each packet.
|
|
*/
|
|
MX_TXCTL(cur_tx) |= MX_TXCTL_FINT;
|
|
sc->mx_cdata.mx_tx_tail = cur_tx;
|
|
|
|
if (sc->mx_cdata.mx_tx_head == NULL) {
|
|
sc->mx_cdata.mx_tx_head = start_tx;
|
|
MX_TXOWN(start_tx) = MX_TXSTAT_OWN;
|
|
CSR_WRITE_4(sc, MX_TXSTART, 0xFFFFFFFF);
|
|
} else {
|
|
MX_TXOWN(start_tx) = MX_UNSENT;
|
|
}
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
|
|
return;
|
|
}
|
|
|
|
static void mx_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct mx_softc *sc = xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
u_int16_t phy_bmcr = 0;
|
|
int s;
|
|
|
|
if (sc->mx_autoneg)
|
|
return;
|
|
|
|
s = splimp();
|
|
|
|
if (sc->mx_pinfo != NULL)
|
|
phy_bmcr = mx_phy_readreg(sc, PHY_BMCR);
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
mx_stop(sc);
|
|
mx_reset(sc);
|
|
|
|
/*
|
|
* Set cache alignment and burst length.
|
|
*/
|
|
CSR_WRITE_4(sc, MX_BUSCTL, MX_BUSCTL_CONFIG);
|
|
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_NO_RXCRC);
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_HEARTBEAT);
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_STORENFWD);
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_TX_BACKOFF);
|
|
|
|
/*
|
|
* The app notes for the 98713 and 98715A say that
|
|
* in order to have the chips operate properly, a magic
|
|
* number must be written to CSR16. Macronix does not
|
|
* document the meaning of these bits so there's no way
|
|
* to know exactly what they mean. The 98713 has a magic
|
|
* number all its own; the rest all use a different one.
|
|
*/
|
|
MX_CLRBIT(sc, MX_MAGICPACKET, 0xFFFF0000);
|
|
if (sc->mx_type == MX_TYPE_98713)
|
|
MX_SETBIT(sc, MX_MAGICPACKET, MX_MAGIC_98713);
|
|
else
|
|
MX_SETBIT(sc, MX_MAGICPACKET, MX_MAGIC_98715);
|
|
|
|
if (sc->mx_pinfo != NULL) {
|
|
MX_SETBIT(sc, MX_WATCHDOG, MX_WDOG_JABBERDIS);
|
|
mx_setcfg(sc, mx_phy_readreg(sc, PHY_BMCR));
|
|
} else
|
|
mx_setmode(sc, sc->ifmedia.ifm_media, 0);
|
|
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_TX_THRESH);
|
|
MX_CLRBIT(sc, MX_NETCFG, MX_NETCFG_SPEEDSEL);
|
|
|
|
if (IFM_SUBTYPE(sc->ifmedia.ifm_media) == IFM_10_T)
|
|
MX_SETBIT(sc, MX_NETCFG, MX_TXTHRESH_160BYTES);
|
|
else
|
|
MX_SETBIT(sc, MX_NETCFG, MX_TXTHRESH_72BYTES);
|
|
|
|
/* Init circular RX list. */
|
|
if (mx_list_rx_init(sc) == ENOBUFS) {
|
|
printf("mx%d: initialization failed: no "
|
|
"memory for rx buffers\n", sc->mx_unit);
|
|
mx_stop(sc);
|
|
(void)splx(s);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Init tx descriptors.
|
|
*/
|
|
mx_list_tx_init(sc);
|
|
|
|
/*
|
|
* Load the address of the RX list.
|
|
*/
|
|
CSR_WRITE_4(sc, MX_RXADDR, vtophys(sc->mx_cdata.mx_rx_head->mx_ptr));
|
|
|
|
/*
|
|
* Load the RX/multicast filter.
|
|
*/
|
|
mx_setfilt(sc);
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_4(sc, MX_IMR, MX_INTRS);
|
|
CSR_WRITE_4(sc, MX_ISR, 0xFFFFFFFF);
|
|
|
|
/* Enable receiver and transmitter. */
|
|
MX_SETBIT(sc, MX_NETCFG, MX_NETCFG_TX_ON|MX_NETCFG_RX_ON);
|
|
CSR_WRITE_4(sc, MX_RXSTART, 0xFFFFFFFF);
|
|
|
|
/* Restore state of BMCR */
|
|
if (sc->mx_pinfo != NULL)
|
|
mx_phy_writereg(sc, PHY_BMCR, phy_bmcr);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
(void)splx(s);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int mx_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct mx_softc *sc;
|
|
struct ifmedia *ifm;
|
|
|
|
sc = ifp->if_softc;
|
|
ifm = &sc->ifmedia;
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return(EINVAL);
|
|
|
|
if (sc->mx_type == MX_TYPE_98713 && sc->mx_pinfo != NULL) {
|
|
if (IFM_SUBTYPE(ifm->ifm_media) == IFM_AUTO)
|
|
mx_autoneg_mii(sc, MX_FLAG_SCHEDDELAY, 1);
|
|
else
|
|
mx_setmode_mii(sc, ifm->ifm_media);
|
|
} else {
|
|
if (IFM_SUBTYPE(ifm->ifm_media) == IFM_AUTO)
|
|
mx_autoneg(sc, MX_FLAG_SCHEDDELAY, 1);
|
|
else
|
|
mx_setmode(sc, ifm->ifm_media, 1);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void mx_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct mx_softc *sc;
|
|
u_int16_t advert = 0, ability = 0;
|
|
u_int32_t media = 0;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (sc->mx_type != MX_TYPE_98713 || sc->mx_pinfo == NULL) {
|
|
media = CSR_READ_4(sc, MX_NETCFG);
|
|
if (media & MX_NETCFG_PORTSEL)
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX;
|
|
else
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T;
|
|
if (media & MX_NETCFG_FULLDUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
return;
|
|
}
|
|
|
|
if (!(mx_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_AUTONEGENBL)) {
|
|
if (mx_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_SPEEDSEL)
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX;
|
|
else
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T;
|
|
if (mx_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_DUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
return;
|
|
}
|
|
|
|
ability = mx_phy_readreg(sc, PHY_LPAR);
|
|
advert = mx_phy_readreg(sc, PHY_ANAR);
|
|
if (advert & PHY_ANAR_100BT4 &&
|
|
ability & PHY_ANAR_100BT4) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_T4;
|
|
} else if (advert & PHY_ANAR_100BTXFULL &&
|
|
ability & PHY_ANAR_100BTXFULL) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
} else if (advert & PHY_ANAR_100BTXHALF &&
|
|
ability & PHY_ANAR_100BTXHALF) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
} else if (advert & PHY_ANAR_10BTFULL &&
|
|
ability & PHY_ANAR_10BTFULL) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
} else if (advert & PHY_ANAR_10BTHALF &&
|
|
ability & PHY_ANAR_10BTHALF) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int mx_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct mx_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
int s, error = 0;
|
|
|
|
s = splimp();
|
|
|
|
switch(command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
mx_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
mx_stop(sc);
|
|
}
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
mx_init(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
(void)splx(s);
|
|
|
|
return(error);
|
|
}
|
|
|
|
static void mx_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct mx_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
if (sc->mx_autoneg) {
|
|
if (sc->mx_type == MX_TYPE_98713 && sc->mx_pinfo != NULL)
|
|
mx_autoneg_mii(sc, MX_FLAG_DELAYTIMEO, 1);
|
|
else
|
|
mx_autoneg(sc, MX_FLAG_DELAYTIMEO, 1);
|
|
return;
|
|
}
|
|
|
|
ifp->if_oerrors++;
|
|
printf("mx%d: watchdog timeout\n", sc->mx_unit);
|
|
|
|
if (sc->mx_pinfo == NULL) {
|
|
if (!(CSR_READ_4(sc, MX_10BTSTAT) & MX_TSTAT_LS10) ||
|
|
!(CSR_READ_4(sc, MX_10BTSTAT) & MX_TSTAT_LS100))
|
|
printf("mx%d: no carrier - transceiver "
|
|
"cable problem?\n", sc->mx_unit);
|
|
} else {
|
|
if (!(mx_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT))
|
|
printf("mx%d: no carrier - transceiver "
|
|
"cable problem?\n", sc->mx_unit);
|
|
}
|
|
|
|
mx_stop(sc);
|
|
mx_reset(sc);
|
|
mx_init(sc);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
mx_start(ifp);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void mx_stop(sc)
|
|
struct mx_softc *sc;
|
|
{
|
|
register int i;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
|
|
MX_CLRBIT(sc, MX_NETCFG, (MX_NETCFG_RX_ON|MX_NETCFG_TX_ON));
|
|
CSR_WRITE_4(sc, MX_IMR, 0x00000000);
|
|
CSR_WRITE_4(sc, MX_TXADDR, 0x00000000);
|
|
CSR_WRITE_4(sc, MX_RXADDR, 0x00000000);
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < MX_RX_LIST_CNT; i++) {
|
|
if (sc->mx_cdata.mx_rx_chain[i].mx_mbuf != NULL) {
|
|
m_freem(sc->mx_cdata.mx_rx_chain[i].mx_mbuf);
|
|
sc->mx_cdata.mx_rx_chain[i].mx_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero((char *)&sc->mx_ldata->mx_rx_list,
|
|
sizeof(sc->mx_ldata->mx_rx_list));
|
|
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < MX_TX_LIST_CNT; i++) {
|
|
if (sc->mx_cdata.mx_tx_chain[i].mx_mbuf != NULL) {
|
|
m_freem(sc->mx_cdata.mx_tx_chain[i].mx_mbuf);
|
|
sc->mx_cdata.mx_tx_chain[i].mx_mbuf = NULL;
|
|
}
|
|
}
|
|
|
|
bzero((char *)&sc->mx_ldata->mx_tx_list,
|
|
sizeof(sc->mx_ldata->mx_tx_list));
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static void mx_shutdown(howto, arg)
|
|
int howto;
|
|
void *arg;
|
|
{
|
|
struct mx_softc *sc = (struct mx_softc *)arg;
|
|
|
|
mx_stop(sc);
|
|
|
|
return;
|
|
}
|
|
|
|
static struct pci_device mx_device = {
|
|
"mx",
|
|
mx_probe,
|
|
mx_attach,
|
|
&mx_count,
|
|
NULL
|
|
};
|
|
DATA_SET(pcidevice_set, mx_device);
|