freebsd-nq/release/doc/zh_CN.GB2312/hardware/common/dev.sgml
2006-06-14 15:32:50 +00:00

954 lines
22 KiB
Plaintext
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<!--
The FreeBSD Simplified Chinese Project
Original Revision: 1.299
-->
<!--
The "Supported Devices" section of the release notes.
Generally processor-independent, with conditional text
inclusion handling any architecture-dependent text.
Within each subsection describing a class of hardware
(i.e. Ethernet interfaces), list broad groups of devices
alphabetically as paragraphs sorted alphabetically (frequently
these groups will be arranged by manufacturer, i.e. 3Com
Ethernet interfaces).
Where applicable, a "Miscellaneous" section may follow all
other named sections.
These guidelines are not hard-and-fast rules, and exceptions
will occur. Following these guidelines (vague as they may be)
is highly recommended to try to keep the formatting of
this section consistent.
We give manpage references using the &man entities where
possible. If a driver has no manpage (and consequently no
&man entity, we simply give the name of the driver).
Please avoid doing &man entity conversions unless you
know for sure that an entity and manpage exist; sweeps through
this file to fix "missed" conversions are likely to break the
build.
-->
<sect1 id="support">
<sect1info>
<pubdate>$FreeBSD$</pubdate>
</sect1info>
<title>支持的硬件</title>
<para>这一节描述了目前已知的被 &os 在
&arch.print; 平台上支持的硬件。 其他配置可能也能用, 只是尚未测试过。
我们鼓励您对这份列表的内容进行反馈、 更新和修正。</para>
<para>这份列表尽可能包含了驱动程序能够适用的一类设备。
如果驱动程序在 &os; 基本安装包中有联机手册 (绝大多数应该有)
则会在这里引用。 支持的具体设备或控制器型号等等,
可以在联机手册中找到。</para>
<note>
<para>设备列表是直接从 &os; 联机手册中生成的。 这意味着一些设备,
如果它们被多种不同的驱动程序支持的话, 可能会相应地出现多次。</para>
</note>
<sect2 id="disk">
<title>磁盘控制器</title>
<para arch="i386,alpha,sparc64,ia64,pc98,amd64">IDE/ATA 控制器 (&man.ata.4; 驱动程序)</para>
<para arch="pc98">IDE/ATA 控制器 (wdc 驱动程序)
<itemizedlist>
<listitem>
<para>板载 IDE 控制器</para>
</listitem>
</itemizedlist>
</para>
&hwlist.aac;
&hwlist.adv;
&hwlist.adw;
&hwlist.aha;
&hwlist.ahb;
&hwlist.ahc;
&hwlist.ahd;
&hwlist.aic;
&hwlist.amd;
&hwlist.amr;
&hwlist.arcmsr;
&hwlist.asr;
&hwlist.bt;
&hwlist.ciss;
&hwlist.ct;
&hwlist.dpt;
<note>
<para arch="i386,amd64">支持从这种控制器启动。 但 EISA
卡目前并不支持。</para>
<para arch="alpha">由于 SRM 的限制, 不支持从这种控制器启动。</para>
</note>
&hwlist.esp;
&hwlist.hptmv;
&hwlist.ida;
&hwlist.iir;
&hwlist.ips;
&hwlist.isp;
&hwlist.mfi;
&hwlist.mlx;
<note>
<para arch="i386,amd64">能够支持从这些控制器启动。 不支持 EISA
适配器。</para>
<para arch="alpha">由于 SRM 的限制, 不支持从这些控制器启动。
Digital/Compaq 为 Alpha 系统作为 StorageWorks 系列一部分出售的 DAC960
控制器, 例如 KZPSC 或 KZPAC 可以从 SRM 启动。 注意这些卡使用
2.x 的固件。 目前尚不知道新版固件是否能配合 SRM 启动。</para>
</note>
&hwlist.mly;
&hwlist.mpt;
&hwlist.ncr;
&hwlist.ncv;
&hwlist.nsp;
&hwlist.pst;
&hwlist.stg;
&hwlist.sym;
&hwlist.trm;
&hwlist.twa;
&hwlist.twe;
&hwlist.vpo;
<para arch="i386">wds(4) 驱动程序支持 WD7000 SCSI 控制器</para>
<para>所有支持的 SCSI 控制器都提供了完整的
SCSI-I, SCSI-II, 和 SCSI-III 设备支持, 包括硬盘, 光盘,
磁带机 (包括 DAT, 8mm Exabyte, Mammoth, 以及 DLT), 盘柜,
处理器目标设备 以及 CD-ROM 驱动器。 支持 CD-ROM 命令的
WORM 设备则提供了只读的支持
(例如 &man.cd.4;)。 WORM/CD-R/CD-RW 写操作的支持由
&man.cdrecord.1; 提供, 它是 Ports Collection 中
<filename role="package">sysutils/cdrtools</filename> port
的一部分。</para>
<para>目前, 对以下 CD-ROM 文件系统类型提供支持:
<itemizedlist>
<listitem>
<para>SCSI 接口 (也包括 ProAudio Spectrum 和
SoundBlaster SCSI) (&man.cd.4;)</para>
</listitem>
<listitem arch="i386">
<para>Sony 专有接口 (所有型号) (&man.scd.4;)</para>
</listitem>
<listitem>
<para>ATAPI IDE 接口 (&man.acd.4;)</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386">以下设备不再维护了:
<itemizedlist>
<listitem>
<para>Mitsumi 专有的 CD-ROM 接口 (所有型号) (&man.mcd.4;)</para>
</listitem>
</itemizedlist>
</para>
</sect2>
<sect2 id="ethernet">
<title>以太网接口</title>
&hwlist.aue;
&hwlist.axe;
&hwlist.bce;
<para arch="i386,amd64">基于 Broadcom BCM4401 的高速以太网适配器
(&man.bfe.4; 驱动程序)</para>
&hwlist.bge;
&hwlist.cdce;
<para arch="i386,amd64">基于 Crystal Semiconductor CS89x0 的 NIC
(&man.cs.4; 驱动程序)
</para>
&hwlist.cue;
&hwlist.dc;
&hwlist.de;
&hwlist.ed;
&hwlist.em;
&hwlist.ep;
&hwlist.ex;
&hwlist.fe;
&hwlist.fxp;
&hwlist.gem;
&hwlist.hme;
&hwlist.ie;
&hwlist.ixgb;
&hwlist.kue;
&hwlist.lge;
&hwlist.mxge;
&hwlist.my;
&hwlist.nge;
&hwlist.nve;
&hwlist.pcn;
&hwlist.re;
&hwlist.rl;
&hwlist.rue;
&hwlist.sf;
&hwlist.sis;
&hwlist.sk;
&hwlist.sn;
&hwlist.snc;
&hwlist.ste;
&hwlist.ti;
&hwlist.tl;
<para arch="i386,pc98,amd64">基于 SMC 83c17x (EPIC) 的以太网 NIC (&man.tx.4; 驱动程序)
</para>
&hwlist.txp;
&hwlist.udav;
&hwlist.vge;
&hwlist.vr;
&hwlist.vx;
&hwlist.wb;
&hwlist.xe;
&hwlist.xl;
</sect2>
<sect2 id="tokenring">
<title>Token Ring Interfaces</title>
&hwlist.oltr;
</sect2>
<sect2 id="fddi">
<title>FDDI 接口</title>
<para arch="i386,pc98,alpha">DEC DEFPA PCI (&man.fpa.4; 驱动程序)</para>
<para arch="i386">DEC DEFEA EISA (&man.fpa.4; 驱动程序)</para>
</sect2>
<sect2 id="atm">
<title>ATM 接口</title>
<para arch="i386,pc98">基于 Midway 的 ATM 接口 (&man.en.4;
驱动程序)</para>
<para arch="i386,pc98,sparc64">FORE Systems, Inc. PCA-200E ATM PCI
适配器 (hfa 和 &man.fatm.4; 驱动程序)</para>
<para arch="i386,pc98">基于 IDT NICStAR 77201/211 的 ATM 适配器 (&man.idt.4;
驱动程序)</para>
<para arch="i386,pc98,sparc64">FORE Systems, Inc. HE155 和 HE622
ATM 接口 (&man.hatm.4; 驱动程序)</para>
<para arch="i386,pc98">基于 IDT77252 的 ATM 卡 (&man.patm.4;
驱动程序)</para>
</sect2>
<sect2 id="wlan">
<title>无线网络接口</title>
<para arch="i386">NCR / AT&amp;T / Lucent Technologies WaveLan T1-speed
ISA/radio LAN 卡 (&man.wl.4; 驱动程序)</para>
<para arch="i386,pc98,amd64">Lucent Technologies WaveLAN/IEEE 802.11b
无线网络适配器以及软件通用型的采用 Lucent Hermes, Intersil
PRISM-II, Intersil PRISM-2.5, Intersil Prism-3, 和 Symbol
Spectrum24 芯片组的网卡 (&man.wi.4; 驱动程序)
</para>
<para arch="i386,pc98,amd64">Cisco/Aironet 802.11b 无线网络适配器 (&man.an.4; 驱动程序)
</para>
<para arch="i386,pc98">Raytheon Raylink 2.4GHz 无线网络适配器 (&man.ray.4; 驱动程序)
</para>
&hwlist.awi;
&hwlist.cnw;
&hwlist.ath;
</sect2>
<sect2 id="misc-network">
<title>其他网络设备</title>
&hwlist.ce;
&hwlist.cx;
&hwlist.cp;
&hwlist.ctau;
<para arch="i386">Granch SBNI12 点对点通讯适配器
(&man.sbni.4; 驱动程序)
</para>
<para arch="i386">Granch SBNI16 SHDSL 调制解调器 (&man.sbsh.4;
驱动程序)</para>
&hwlist.cm;
</sect2>
<sect2 id="isdn">
<title>ISDN 接口</title>
<para arch="i386">AcerISDN P10 ISA PnP (实验性的)</para>
<para arch="i386">Asuscom ISDNlink 128K ISA</para>
<para arch="i386">ASUSCOM P-IN100-ST-D (以及其他基于 Winbond W6692 的卡)</para>
<para arch="i386">AVM
<itemizedlist>
<listitem>
<para>A1</para>
</listitem>
<listitem>
<para>B1 ISA (在 V2.0 上测试过)</para>
</listitem>
<listitem>
<para>B1 PCI (在 V4.0 上测试过)</para>
</listitem>
<listitem>
<para>Fritz!Card classic</para>
</listitem>
<listitem>
<para>Fritz!Card PnP</para>
</listitem>
<listitem>
<para>Fritz!Card PCI</para>
</listitem>
<listitem>
<para>Fritz!Card PCI, Version 2</para>
</listitem>
<listitem>
<para>T1</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386">Creatix
<itemizedlist>
<listitem>
<para>ISDN-S0</para>
</listitem>
<listitem>
<para>ISDN-S0 P&amp;P</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386">Compaq Microcom 610 ISDN (Compaq series PSB2222I) ISA PnP</para>
<para arch="i386">Dr. Neuhaus Niccy Go@ 及兼容</para>
<para arch="i386">Dynalink IS64PPH 和 IS64PPH+</para>
<para arch="i386">Eicon Diehl DIVA 2.0 和 2.02</para>
<para arch="i386">ELSA
<itemizedlist>
<listitem>
<para>ELSA PCC-16</para>
</listitem>
<listitem>
<para>QuickStep 1000pro ISA</para>
</listitem>
<listitem>
<para>MicroLink ISDN/PCI</para>
</listitem>
<listitem>
<para>QuickStep 1000pro PCI</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386">ITK ix1 Micro ( &lt; V.3, 非 PnP 版本 )</para>
<para arch="i386">Sedlbauer Win Speed</para>
<para arch="i386">Siemens I-Surf 2.0</para>
<para arch="i386">TELEINT ISDN SPEED No.1 (试验性支持)</para>
<para arch="i386">Teles
<itemizedlist>
<listitem>
<para>S0/8</para>
</listitem>
<listitem>
<para>S0/16</para>
</listitem>
<listitem>
<para>S0/16.3</para>
</listitem>
<listitem>
<para>S0/16.3 PnP</para>
</listitem>
<listitem>
<para>16.3c ISA PnP (试验性支持)</para>
</listitem>
<listitem>
<para>Teles PCI-TJ</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386">Traverse Technologies NETjet-S PCI</para>
<para arch="i386">USRobotics Sportster ISDN TA intern</para>
<para arch="i386">基于 Winbond W6692 的 PCI 卡</para>
</sect2>
<sect2 id="serial">
<title>串口</title>
<para arch="i386,alpha,amd64"><quote>PC 标准</quote> 基于 8250、 16450 以及基于 16550 的串口 (&man.sio.4; 驱动程序)</para>
&hwlist.uart;
&hwlist.scc;
<para arch="i386,alpha,amd64">使用共享 IRQ 的 AST 4 口串口卡</para>
<para arch="i386">ARNET 串口卡 (&man.ar.4; 驱动程序)
<itemizedlist>
<listitem>
<para>使用共享 IRQ 的 ARNET 8 口串口卡</para>
</listitem>
<listitem>
<para>ARNET (现在是 Digiboard) Sync 570/i 高速串口</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386">Boca 多口串口卡
<itemizedlist>
<listitem>
<para>Boca BB1004 4-口串口卡
(<emphasis>不</emphasis> 支持调制解调器)</para>
</listitem>
<listitem>
<para>Boca IOAT66 6-口串口卡 (支持调制解调器)</para>
</listitem>
<listitem>
<para>Boca BB1008 8-口串口卡
(<emphasis>不</emphasis> 支持调制解调器)</para>
</listitem>
<listitem>
<para>Boca BB2016 16-口串口卡 (支持调制解调器)</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386,alpha">Comtrol Rocketport 卡 (&man.rp.4; 驱动程序)</para>
<para arch="i386">Cyclades Cyclom-Y 串口板 (&man.cy.4; 驱动程序)</para>
<para arch="i386">使用共享 IRQ 的 STB 4 口串口卡</para>
<para arch="i386">DigiBoard 智能串口卡 (digi 驱动程序)
</para>
<para arch="i386,ia64,amd64">基于 PCI 的多口串口板 (&man.puc.4;
驱动程序)
<itemizedlist>
<listitem arch="i386,amd64">
<para>Actiontech 56K PCI</para>
</listitem>
<listitem arch="i386,amd64">
<para>Avlab Technology, PCI IO 2S 和 PCI IO 4S</para>
</listitem>
<listitem arch="i386,amd64">
<para>Comtrol RocketPort 550</para>
</listitem>
<listitem arch="i386,amd64">
<para>Decision Computers PCCOM 4-多口串口 和 双口 RS232/422/485</para>
</listitem>
<listitem arch="ia64">
<para>Diva Serial (GSP) 多口 UART</para>
</listitem>
<listitem arch="i386,amd64">
<para>Dolphin Peripherals 4025/4035/4036</para>
</listitem>
<listitem arch="i386,amd64">
<para>IC Book Labs Dreadnought 16x Lite 和 Pro</para>
</listitem>
<listitem arch="i386,amd64">
<para>Lava Computers 2SP-PCI/DSerial-PCI/Quattro-PCI/Octopus-550</para>
</listitem>
<listitem arch="i386,amd64">
<para>Middle Digital, Weasle 串口</para>
</listitem>
<listitem arch="i386,amd64">
<para>Moxa Industio CP-114, Smartio C104H-PCI 和 C168H/PCI</para>
</listitem>
<listitem arch="i386,amd64">
<para>NEC PK-UG-X001 和 PK-UG-X008</para>
</listitem>
<listitem arch="i386,amd64">
<para>Netmos NM9835 PCI-2S-550</para>
</listitem>
<listitem arch="i386,amd64">
<para>Oxford Semiconductor OX16PCI954 PCI UART</para>
</listitem>
<listitem arch="i386,amd64">
<para>Syba Tech SD-LAB PCI-4S2P-550-ECP</para>
</listitem>
<listitem arch="i386,amd64">
<para>SIIG Cyber I/O PCI 16C550/16C650/16C850</para>
</listitem>
<listitem arch="i386,amd64">
<para>SIIG Cyber 2P1S PCI 16C550/16C650/16C850</para>
</listitem>
<listitem arch="i386,amd64">
<para>SIIG Cyber 2S1P PCI 16C550/16C650/16C850</para>
</listitem>
<listitem arch="i386,amd64">
<para>SIIG Cyber 4S PCI 16C550/16C650/16C850</para>
</listitem>
<listitem arch="i386,amd64">
<para>SIIG Cyber Serial (Single 和 Dual) PCI 16C550/16C650/16C850</para>
</listitem>
<listitem arch="i386,amd64">
<para>Syba Tech Ltd. PCI-4S2P-550-ECP</para>
</listitem>
<listitem arch="i386,amd64">
<para>Titan PCI-200H 和 PCI-800H</para>
</listitem>
<listitem arch="i386,amd64">
<para>US Robotics (3Com) 3CP5609 调制解调器</para>
</listitem>
<listitem arch="i386,amd64">
<para>VScom PCI-400 和 PCI-800</para>
</listitem>
</itemizedlist>
</para>
&hwlist.rc;
&hwlist.sr;
<para arch="i386,amd64">支持 Specialix SI/XIO/SX 多口串口卡, 同时包括较旧的
SIHOST2.x 以及 <quote>增强型</quote> (基于 transputer
也就是 JET 的) 宿主卡 (ISA、 EISA 和 PCI 接口)
注意, 最新的 SX+ PCI 卡目前还不支持。
(&man.si.4; 驱动程序)</para>
<para arch="pc98">内置串口 (&man.sio.4; 驱动程序)
<itemizedlist>
<listitem>
<para>PC-9801 板载</para>
</listitem>
<listitem>
<para>PC-9821 第二 CCU (flags 0x12000000)</para>
</listitem>
</itemizedlist>
</para>
<para arch="pc98">NEC PC-9861K, PC-9801-101 和 Midori-Denshi MDC-926Rs (&man.sio.4; 驱动程序)
<itemizedlist>
<listitem>
<para>COM2 (flags 0x01000000)</para>
</listitem>
<listitem>
<para>COM3 (flags 0x02000000)</para>
</listitem>
</itemizedlist>
</para>
<para arch="pc98">NEC PC-9801-120 (&man.sio.4; 驱动程序)</para>
<note arch="pc98">
<para>需要在内核配置中指定 "flags 0x11000000"。</para>
</note>
<para arch="pc98">Microcore MC-16550, MC-16550II, MC-RS98 (&man.sio.4; 驱动程序)</para>
<note arch="pc98">
<para>需要在内核配置中指定 "flags 0x14000?01"。</para>
</note>
<para arch="pc98">Media Intelligent RSB-2000, RSB-3000 and AIWA B98-02 (&man.sio.4; 驱动程序)</para>
<note arch="pc98">
<para>需要在内核配置中指定 "flags 0x15000?01"。</para>
</note>
<para arch="pc98">Media Intelligent RSB-384 (&man.sio.4; 驱动程序)</para>
<note arch="pc98">
<para>需要在内核配置中指定 "flags 0x16000001"。</para>
</note>
<para arch="pc98">I-O DATA RSA-98III (&man.sio.4; 驱动程序)</para>
<note arch="pc98">
<para>需要在内核配置中指定 "flags 0x18000?01"。</para>
</note>
<para arch="pc98">Hayes ESP98 (&man.sio.4; 驱动程序)</para>
<note arch="pc98">
<para>需要在内核配置中指定 "options COM_ESP" 和 "flags 0x19000000"。</para>
</note>
</sect2>
<sect2 id="sound">
<title>声音设备</title>
&hwlist.snd.ad1816;
&hwlist.snd.als4000;
&hwlist.snd.atiixp;
&hwlist.snd.audiocs;
&hwlist.snd.cmi;
&hwlist.snd.cs4281;
&hwlist.snd.csa;
&hwlist.snd.ds1;
&hwlist.snd.emu10k1;
&hwlist.snd.es137x;
&hwlist.snd.ess;
&hwlist.snd.fm801;
&hwlist.snd.gusc;
&hwlist.snd.ich;
&hwlist.snd.maestro;
&hwlist.snd.maestro3;
&hwlist.snd.mss;
&hwlist.snd.neomagic;
&hwlist.snd.sbc;
&hwlist.snd.solo;
&hwlist.snd.t4dwave;
&hwlist.snd.via8233;
&hwlist.snd.via82c686;
&hwlist.snd.vibes;
<para arch="pc98">NEC PC-9801-73, 86 及兼容 (nss 驱动程序)
<itemizedlist>
<listitem>
<para>NEC A-MATE 内置声音</para>
</listitem>
<listitem>
<para>Q-Vision WaveStar, WaveMaster</para>
</listitem>
</itemizedlist>
</para>
<para arch="pc98">NEC X-MATE, CanBe, ValueStar 内置 (mss 驱动程序)</para>
<para arch="pc98">Creative Technologies SoundBlaster(98) (&man.sb.4;
驱动程序)</para>
<para arch="pc98">I-O DATA CD-BOX (&man.sb.4; 驱动程序)</para>
<para arch="pc98">MPU-401 及兼容接口 (mpu 驱动)
<itemizedlist>
<listitem>
<para>Q-Vision WaveStar</para>
</listitem>
</itemizedlist>
</para>
</sect2>
<sect2 id="camera">
<title>照相机和视频捕捉设备</title>
&hwlist.bktr;
<para arch="i386">Connectix QuickCam</para>
</sect2>
<sect2 id="usb">
<title>USB 设备</title>
<para arch="alpha,i386,ia64,pc98,amd64">&os; 能够支持一系列 USB 外设;
已知能够正确使用的设备在这节列出。 由于 USB 设备天生的通用性,
除了少量比较有个性的设备之外, 同一类型的设备几乎都能被支持,
即使在这里没有明确地列出。</para>
<note arch="alpha,i386,ia64,pc98,amd64">
<para>USB 以太网适配器可以在 <link
linkend="ethernet">以太网接口</link> 一节找到。</para>
</note>
<note arch="alpha,i386,ia64,pc98,amd64">
<para>USB 蓝牙适配器可以在 <link
linkend="bluetooth">蓝牙</link> 一节找到。</para>
</note>
&hwlist.ohci;
&hwlist.uhci;
<para arch="i386,ia64,pc98,amd64">采用 EHCI 接口的 USB 2.0
控制器 (&man.ehci.4; 驱动程序)</para>
<para arch="i386,ia64,pc98,alpha,amd64">集线器
</para>
<para arch="i386,ia64,pc98,alpha,amd64">键盘 (&man.ukbd.4; 驱动程序)
</para>
<para arch="i386,pc98,amd64">其他
<itemizedlist>
<listitem>
<para>Assist Computer Systems PC Camera C-M1</para>
</listitem>
<listitem>
<para>ActiveWire I/O 板</para>
</listitem>
<listitem>
<para>Creative Technology Video Blaster WebCam Plus</para>
</listitem>
<listitem>
<para>D-Link DSB-R100 USB Radio (&man.ufm.4; 驱动程序)</para>
</listitem>
<listitem>
<para>Mirunet AlphaCam Plus</para>
</listitem>
</itemizedlist>
</para>
&hwlist.urio;
&hwlist.umodem;
<para arch="i386,ia64,pc98,alpha,amd64">鼠标器 (&man.ums.4; 驱动程序)
</para>
&hwlist.ulpt;
&hwlist.ubsa;
&hwlist.ubser;
&hwlist.uftdi;
&hwlist.uplcom;
&hwlist.umct;
&hwlist.uscanner;
&hwlist.umass;
<para arch="i386,pc98,amd64">声音设备 (&man.uaudio.4; 驱动程序)
</para>
&hwlist.uvisor;
</sect2>
<sect2 id="firewire">
<title>IEEE 1394 (火线) 设备</title>
&hwlist.fwohci;
<para arch="i386,sparc64,amd64">串行总线协议 2 (SBP-2)
存储设备 (&man.sbp.4; 驱动程序)</para>
</sect2>
<sect2 id="bluetooth">
<title>蓝牙设备</title>
&hwlist.ng.bt3c;
&hwlist.ng.ubt;
</sect2>
<sect2 id="crypto-accel">
<title>密码学加速器</title>
&hwlist.hifn;
&hwlist.safe;
&hwlist.ubsec;
</sect2>
<sect2 id="misc">
<title>其他</title>
<para arch="i386,pc98,amd64">FAX-Modem/PCCARD
<itemizedlist>
<listitem>
<para>MELCO IGM-PCM56K/IGM-PCM56KH</para>
</listitem>
<listitem>
<para>Nokia Card Phone 2.0 (gsm900/dcs1800 HSCSD 终端)</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386,pc98,alpha,amd64">软驱 (&man.fdc.4; 驱动程序)</para>
<para arch="i386,alpha,amd64">VGA-兼容 显示卡
(&man.vga.4; 驱动程序)
<note>
<para>关于特定显卡与 <application>Xorg</application> 的兼容信息,
可以在 <ulink
url="http://www.x.org/"></ulink> 找到。</para>
</note>
</para>
<para arch="i386,pc98,alpha,ia64,amd64">键盘包括:
<itemizedlist>
<listitem arch="i386,alpha">
<para>AT-风格的 键盘 (&man.atkbd.4; 驱动程序)</para>
</listitem>
<listitem arch="i386,alpha,amd64">
<para>PS/2 键盘 (&man.atkbd.4; 驱动程序)</para>
</listitem>
<listitem arch="pc98">
<para>标准键盘</para>
</listitem>
<listitem arch="i386,pc98,alpha,ia64,amd64">
<para>USB 键盘 (&man.ukbd.4; 驱动程序)</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386,pc98,alpha,ia64,amd64">定点设备包括:
<itemizedlist>
<listitem arch="i386,pc98,amd64">
<para>总线鼠标和兼容设备 (&man.mse.4; 驱动程序)</para>
</listitem>
<listitem arch="i386,alpha,amd64">
<para>PS/2 鼠标和兼容设备, 也包括一系列笔记本定点设备
(&man.psm.4; 驱动程序)</para>
</listitem>
<listitem>
<para>串口鼠标和兼容设备</para>
</listitem>
<listitem arch="i386,pc98,alpha,ia64,amd64">
<para>USB 鼠标 (&man.ums.4; 驱动程序)</para>
</listitem>
</itemizedlist>
<note>
<para>&man.moused.8; 提供了如何在 &os; 中使用定点设备的进一步信息。
关于如何在 <application>Xorg</application> 中使用这类设备的信息, 可以在
<ulink url="http://www.x.org/"></ulink> 找到。</para>
</note>
</para>
<para arch="i386,alpha,amd64"><quote>PC 标准</quote> 并口 (&man.ppc.4; 驱动程序)</para>
<para arch="pc98"><quote>PC-9821 标准</quote> 并口 (&man.ppc.4; 驱动程序)</para>
<para arch="i386,amd64">PC-兼容 游戏杆 (&man.joy.4; 驱动程序)</para>
<para arch="pc98">SoundBlaster(98) 的游戏杆接口 (&man.joy.4;
驱动程序)</para>
<para arch="i386,pc98">PHS Data Communication Card/PCCARD
<itemizedlist>
<listitem>
<para>NTT DoCoMo P-in Comp@ct</para>
</listitem>
<listitem>
<para>Panasonic KX-PH405</para>
</listitem>
<listitem>
<para>SII MC-P200</para>
</listitem>
</itemizedlist>
</para>
<para arch="i386">基于 Xilinx XC6200 的可重配置硬件卡, 与
<ulink url="http://www.vcc.com/">Virtual
Computers</ulink> 的 HOT1 兼容 (xrpu 驱动程序)。</para>
<para arch="pc98">NEC PC-98 笔记本的电源管理控制器 (pmc
驱动程序)</para>
<para arch="sparc64">OpenFirmware 控制台 (ofwcons 驱动程序)</para>
</sect2>
</sect1>