freebsd-nq/share/doc/psd/01.cacm/p2

.\" This module is believed to contain source code proprietary to AT&T.
.\" Use and redistribution is subject to the Berkeley Software License
.\" Agreement and your Software Agreement with AT&T (Western Electric).
.\"
.\"	@(#)p2	8.1 (Berkeley) 6/8/93
.\"
.\" $FreeBSD$
.SH
3.6 I/O calls
.PP
The system calls to do I/O are designed to eliminate
the differences between the various devices and styles of
access.
There is no distinction between ``random''
and ``sequential'' I/O, nor is any logical record size imposed
by the system.
The size of an ordinary file is determined
by the number of bytes written on it;
no predetermination of the size of a file is necessary
or possible.
.PP
To illustrate the essentials of I/O,
some of the basic calls are
summarized below
in an anonymous language that will
indicate the required parameters without getting into the
underlying
complexities.
Each call to the system may potentially result in an error
return, which for simplicity is not represented
in the calling sequence.
.PP
To read or write a file assumed to exist already, it must
be opened by the following call:
.P1
filep = open\|(\|name, flag\|)
.P2
where
.UL name
indicates the name of the file.
An arbitrary path name may be given.
The
.UL flag
argument indicates whether the file is to be read, written,
or ``updated,'' that is, read and written simultaneously.
.PP
The returned value
.UL filep
is called a
.IT "file descriptor" .
It is a small integer used to identify the file
in subsequent calls to read, write,
or otherwise manipulate the file.
.PP
To create a new file or completely rewrite an old one,
there is a
.UL create
system call that
creates the given file if it does not exist,
or truncates it to zero length
if it does exist;
.UL create
also opens the new file for writing
and, like
.UL open ,
returns a file descriptor.
.PP
The file system maintains no locks visible to the user, nor is there any
restriction on the number of users who may have a file
open for reading or writing.
Although it is possible for the contents of a file
to become scrambled when two users write on it simultaneously,
in practice difficulties do not arise.
We take the view that locks are neither
necessary nor sufficient, in our environment,
to prevent interference between users of the same file.
They are unnecessary because we are not
faced with large, single-file data bases
maintained by independent processes.
They are insufficient because
locks in the ordinary sense, whereby
one user is prevented from writing on a file that another
user is reading,
cannot prevent confusion
when, for example, both users are editing
a file with an editor that makes
a copy of the file being edited.
.PP
There are, however,
sufficient internal interlocks to maintain
the logical consistency of the file system
when two users engage simultaneously in
activities such as writing on
the same file,
creating files in the same directory,
or deleting each other's open files.
.PP
Except as indicated below, reading and writing
are sequential.
This means that if a particular
byte in the file was the last byte written (or read),
the next I/O call implicitly refers to the
immediately following byte.
For each open file there is a pointer, maintained
inside the system,
that indicates the next byte to be read
or written.
If
.IT n
bytes are read or written, the pointer advances
by
.IT n
bytes.
.PP
Once a file is open, the following calls
may be used:
.P1
n = read\|(\|filep, buffer, count\|)
n = write\|(\|filep, buffer, count\|)
.P2
Up to
.UL count
bytes are transmitted between the file specified
by
.UL filep
and the byte array
specified by
.UL buffer .
The returned value
.UL n
is the number of bytes actually transmitted.
In the
.UL write
case,
.UL n
is the same as
.UL count
except under exceptional conditions, such as I/O errors or
end of physical medium on special files;
in a
.UL read ,
however,
.UL n
may without error be less than
.UL count .
If the read pointer is so near the end of the
file that reading
.UL count
characters
would cause reading beyond the end, only sufficient
bytes are transmitted to reach the end of the
file;
also, typewriter-like terminals
never return more than one line of input.
When a
.UL read
call returns with
.UL n
equal
to zero, the end of the file has been reached.
For disk files this occurs when the read pointer
becomes equal to the current
size of the file.
It is possible to generate an end-of-file
from a terminal by use of an escape
sequence that depends on the device used.
.PP
Bytes written affect only those parts of a file implied by
the position of the write pointer and the
count; no other part of the file
is changed.
If the last byte lies beyond the end of the file, the
file is made to grow as needed.
.PP
To do random (direct-access) I/O
it is only necessary to move the read or write pointer
to the appropriate location in the file.
.P1
location = lseek\|(\|filep, offset, base\|)
.P2
The pointer
associated with
.UL filep
is moved to a position
.UL offset
bytes from the beginning of the file, from the current position
of the pointer, or from the end of the file,
depending on
.UL base.
.UL \&offset
may be negative.
For some devices (e.g., paper
tape and
terminals) seek calls are
ignored.
The actual offset from the beginning of the file
to which the pointer was moved is returned
in
.UL location .
.PP
There are several additional system entries
having to do with I/O and with the file
system that will not be discussed.
For example:
close a file,
get the status of a file,
change the protection mode or the owner
of a file,
create a directory,
make a link to an existing file,
delete a file.
.SH
IV. IMPLEMENTATION OF THE FILE SYSTEM
.PP
As mentioned in Section 3.2 above, a directory entry contains
only a name for the associated file and a pointer to the
file itself.
This pointer is an integer called the
.IT i-number
(for index number)
of the file.
When the file is accessed,
its i-number is used as an index into
a system table (the
.IT i-list \|)
stored in a known
part of the device on which
the directory resides.
The entry found thereby (the file's
.IT i-node \|)
contains
the description of the file:
.IP i
the user and group-\*sID\*n of its owner
.IP ii
its protection bits
.IP iii
the physical disk or tape addresses for the file contents
.IP iv
its size
.IP v
time of creation, last use, and last modification
.IP vi
the number of links to the file, that is, the number of times it appears in a directory
.IP vii
a code indicating whether the file is a directory, an ordinary file, or a special file.
.LP
The purpose of an
.UL open
or
.UL create
system call is to turn the path name given by the user
into an i-number
by searching the explicitly or implicitly named directories.
Once a file is open,
its device, i-number, and read/write pointer are stored in a system table
indexed by the file descriptor returned by the
.UL open
or
.UL create .
Thus, during a subsequent
call to read or write the
file,
the descriptor
may be easily related to the information necessary to access the file.
.PP
When a new file is created,
an i-node is allocated for it and a directory entry is made
that contains the name of the file and the i-node
number.
Making a link to an existing file involves
creating a directory entry with the new name,
copying the i-number from the original file entry,
and incrementing the link-count field of the i-node.
Removing (deleting) a file is done by
decrementing the
link-count of the i-node specified by its directory entry
and erasing the directory entry.
If the link-count drops to 0,
any disk blocks in the file
are freed and the i-node is de-allocated.
.PP
The space on all disks that
contain a file system is divided into a number of
512-byte
blocks logically addressed from 0 up to a limit that
depends on the device.
There is space in the i-node of each file for 13 device addresses.
For nonspecial files,
the first 10 device addresses point at the first
10 blocks of the file.
If the file is larger than 10 blocks,
the 11 device address points to an
indirect block containing up to 128 addresses
of additional blocks in the file.
Still larger files use the twelfth device address
of the i-node to point to
a double-indirect block naming
128 indirect blocks,
each
pointing to 128 blocks of the file.
If required,
the thirteenth device address is
a triple-indirect block.
Thus files may conceptually grow to
[\|(10+128+128\u\s62\s0\d+128\u\s63\s0\d)\*m512\|] bytes.
Once opened,
bytes numbered below 5120 can be read with a single
disk access;
bytes in the range 5120 to 70,656
require two accesses;
bytes in the range 70,656
to 8,459,264
require three accesses;
bytes from there to the
largest file
(1,082,201,088)
require four accesses.
In practice,
a device cache mechanism
(see below)
proves effective in eliminating
most of the indirect fetches.
.PP
The foregoing discussion applies to ordinary files.
When an I/O request is made to a file whose i-node indicates that it
is special,
the last 12 device address words are immaterial,
and the first specifies
an internal
.IT "device name" ,
which is interpreted as a pair of numbers
representing,
respectively, a device type
and subdevice number.
The device type indicates which
system routine will deal with I/O on that device;
the subdevice number selects, for example, a disk drive
attached to a particular controller or one of several
similar terminal interfaces.
.PP
In this environment, the implementation of the
.UL mount
system call (Section 3.4) is quite straightforward.
.UL \&mount
maintains a system table whose
argument is the i-number and device name of the
ordinary file specified
during the
.UL mount ,
and whose corresponding value is the
device name of the indicated special file.
This table is searched for each i-number/device pair
that turns up while a path name is being scanned
during an
.UL open
or
.UL create ;
if a match is found,
the i-number is replaced by the i-number of the root
directory
and the device name is replaced by the table value.
.PP
To the user, both reading and writing of files appear to
be synchronous and unbuffered.
That is, immediately after
return from a
.UL read
call the data are available; conversely,
after a
.UL write
the user's workspace may be reused.
In fact, the system maintains a rather complicated
buffering mechanism that reduces greatly the number
of I/O operations required to access a file.
Suppose a
.UL write
call is made specifying transmission
of a single byte.
The system
will search its buffers to see
whether the affected disk block currently resides in main memory;
if not, it will be read in from the device.
Then the affected byte is replaced in the buffer and an
entry is made in a list of blocks to be written.
The return from the
.UL write
call may then take place,
although the actual I/O may not be completed until a later time.
Conversely, if a single byte is read, the system determines
whether the secondary storage block in which the byte is located is already
in one of the system's buffers; if so, the byte can be returned immediately.
If not, the block is read into a buffer and the byte picked out.
.PP
The system recognizes when
a program has
made accesses to
sequential blocks of a file,
and asynchronously
pre-reads the next block.
This significantly reduces
the running time of most programs
while adding little to
system overhead.
.PP
A program that reads or writes files in units of 512 bytes
has an advantage over a program that reads or writes
a single byte at a time, but the gain is not immense;
it comes mainly from the avoidance of system overhead.
If a program is used rarely or does
no great volume of I/O, it may quite reasonably
read and write in units as small as it wishes.
.PP
The notion of the i-list is an unusual feature
of
.UX .
In practice, this method of organizing the file system
has proved quite reliable and easy to deal with.
To the system itself, one of its strengths is
the fact that each file has a short, unambiguous name
related in a simple way to the protection, addressing,
and other information needed to access the file.
It also permits a quite simple and rapid
algorithm for checking the consistency of a file system,
for example, verification
that the portions of each device containing useful information
and those free to be allocated are disjoint and together
exhaust the space on the device.
This algorithm is independent
of the directory hierarchy, because it need only scan
the linearly organized i-list.
At the same time the notion of the i-list induces certain
peculiarities not found in other file system organizations.
For example, there is the question of who is to be charged
for the space a file occupies,
because all directory entries for a file have equal status.
Charging the owner of a file is unfair in general,
for one user may create a file, another may link to
it, and the first user may delete the file.
The first user is still the owner of the
file, but it should be charged
to the second user.
The simplest reasonably fair algorithm
seems to be to spread the charges
equally among users who have links to a file.
Many installations
avoid the
issue by not charging any fees at all.