7b98f0d91f
Added support for the bops->check_events() interface which was added in the 2.6.38 kernel to replace bops->media_changed(). Fully implementing this functionality allows the volume resize code to rely on revalidate_disk(), which is the preferred mechanism, and removes the need to use check_disk_size_change(). In order for bops->check_events() to lookup the zvol_state_t stored in the disk->private_data the zvol_state_lock needs to be held. Since the check events interface may poll the mutex has been converted to a rwlock for better concurrently. The rwlock need only be taken as a writer in the zvol_free() path when disk->private_data is set to NULL. The configure checks for the block_device_operations structure were consolidated in a single kernel-block-device-operations.m4 file. The ZFS_AC_KERNEL_BDEV_BLOCK_DEVICE_OPERATIONS configure checks and assoicated dead code was removed. This interface was added to the 2.6.28 kernel which predates the oldest supported 2.6.32 kernel and will therefore always be available. Updated maximum Linux version in META file. The 4.17 kernel was released on 2018-06-03 and ZoL is compatible with the finalized kernel. Reviewed-by: Boris Protopopov <boris.protopopov@actifio.com> Reviewed-by: Sara Hartse <sara.hartse@delphix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #7611
675 lines
18 KiB
Plaintext
675 lines
18 KiB
Plaintext
dnl #
|
|
dnl # Default ZFS kernel configuration
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_CONFIG_KERNEL], [
|
|
ZFS_AC_KERNEL
|
|
ZFS_AC_QAT
|
|
ZFS_AC_TEST_MODULE
|
|
ZFS_AC_KERNEL_MISC_MINOR
|
|
ZFS_AC_KERNEL_OBJTOOL
|
|
ZFS_AC_KERNEL_CONFIG
|
|
ZFS_AC_KERNEL_CTL_NAME
|
|
ZFS_AC_KERNEL_PDE_DATA
|
|
ZFS_AC_KERNEL_SET_FS_PWD_WITH_CONST
|
|
ZFS_AC_KERNEL_2ARGS_VFS_FSYNC
|
|
ZFS_AC_KERNEL_FS_STRUCT_SPINLOCK
|
|
ZFS_AC_KERNEL_KUIDGID_T
|
|
ZFS_AC_KERNEL_FALLOCATE
|
|
ZFS_AC_KERNEL_2ARGS_ZLIB_DEFLATE_WORKSPACESIZE
|
|
ZFS_AC_KERNEL_RWSEM_SPINLOCK_IS_RAW
|
|
ZFS_AC_KERNEL_RWSEM_ACTIVITY
|
|
ZFS_AC_KERNEL_RWSEM_ATOMIC_LONG_COUNT
|
|
ZFS_AC_KERNEL_SCHED_RT_HEADER
|
|
ZFS_AC_KERNEL_SCHED_SIGNAL_HEADER
|
|
ZFS_AC_KERNEL_IO_SCHEDULE_TIMEOUT
|
|
ZFS_AC_KERNEL_4ARGS_VFS_GETATTR
|
|
ZFS_AC_KERNEL_3ARGS_VFS_GETATTR
|
|
ZFS_AC_KERNEL_2ARGS_VFS_GETATTR
|
|
ZFS_AC_KERNEL_USLEEP_RANGE
|
|
ZFS_AC_KERNEL_KMEM_CACHE_ALLOCFLAGS
|
|
ZFS_AC_KERNEL_KMEM_CACHE_CREATE_USERCOPY
|
|
ZFS_AC_KERNEL_WAIT_ON_BIT
|
|
ZFS_AC_KERNEL_WAIT_QUEUE_ENTRY_T
|
|
ZFS_AC_KERNEL_WAIT_QUEUE_HEAD_ENTRY
|
|
ZFS_AC_KERNEL_INODE_LOCK
|
|
ZFS_AC_KERNEL_GROUP_INFO_GID
|
|
ZFS_AC_KERNEL_WRITE
|
|
ZFS_AC_KERNEL_READ
|
|
ZFS_AC_KERNEL_TIMER_FUNCTION_TIMER_LIST
|
|
ZFS_AC_KERNEL_DECLARE_EVENT_CLASS
|
|
ZFS_AC_KERNEL_CURRENT_BIO_TAIL
|
|
ZFS_AC_KERNEL_SUPER_USER_NS
|
|
ZFS_AC_KERNEL_SUBMIT_BIO
|
|
ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS_CHECK_EVENTS
|
|
ZFS_AC_KERNEL_BLOCK_DEVICE_OPERATIONS_RELEASE_VOID
|
|
ZFS_AC_KERNEL_TYPE_FMODE_T
|
|
ZFS_AC_KERNEL_3ARG_BLKDEV_GET
|
|
ZFS_AC_KERNEL_BLKDEV_GET_BY_PATH
|
|
ZFS_AC_KERNEL_OPEN_BDEV_EXCLUSIVE
|
|
ZFS_AC_KERNEL_LOOKUP_BDEV
|
|
ZFS_AC_KERNEL_INVALIDATE_BDEV_ARGS
|
|
ZFS_AC_KERNEL_BDEV_LOGICAL_BLOCK_SIZE
|
|
ZFS_AC_KERNEL_BDEV_PHYSICAL_BLOCK_SIZE
|
|
ZFS_AC_KERNEL_BIO_BVEC_ITER
|
|
ZFS_AC_KERNEL_BIO_FAILFAST_DTD
|
|
ZFS_AC_KERNEL_BIO_SET_DEV
|
|
ZFS_AC_KERNEL_REQ_FAILFAST_MASK
|
|
ZFS_AC_KERNEL_REQ_OP_DISCARD
|
|
ZFS_AC_KERNEL_REQ_OP_SECURE_ERASE
|
|
ZFS_AC_KERNEL_REQ_OP_FLUSH
|
|
ZFS_AC_KERNEL_BIO_BI_OPF
|
|
ZFS_AC_KERNEL_BIO_END_IO_T_ARGS
|
|
ZFS_AC_KERNEL_BIO_BI_STATUS
|
|
ZFS_AC_KERNEL_BIO_RW_BARRIER
|
|
ZFS_AC_KERNEL_BIO_RW_DISCARD
|
|
ZFS_AC_KERNEL_BLK_QUEUE_BDI
|
|
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_CLEAR
|
|
ZFS_AC_KERNEL_BLK_QUEUE_FLAG_SET
|
|
ZFS_AC_KERNEL_BLK_QUEUE_FLUSH
|
|
ZFS_AC_KERNEL_BLK_QUEUE_MAX_HW_SECTORS
|
|
ZFS_AC_KERNEL_BLK_QUEUE_MAX_SEGMENTS
|
|
ZFS_AC_KERNEL_BLK_QUEUE_HAVE_BIO_RW_UNPLUG
|
|
ZFS_AC_KERNEL_BLK_QUEUE_HAVE_BLK_PLUG
|
|
ZFS_AC_KERNEL_GET_DISK_AND_MODULE
|
|
ZFS_AC_KERNEL_GET_DISK_RO
|
|
ZFS_AC_KERNEL_GET_GENDISK
|
|
ZFS_AC_KERNEL_HAVE_BIO_SET_OP_ATTRS
|
|
ZFS_AC_KERNEL_GENERIC_READLINK_GLOBAL
|
|
ZFS_AC_KERNEL_DISCARD_GRANULARITY
|
|
ZFS_AC_KERNEL_CONST_XATTR_HANDLER
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_NAME
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_GET
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_SET
|
|
ZFS_AC_KERNEL_XATTR_HANDLER_LIST
|
|
ZFS_AC_KERNEL_INODE_OWNER_OR_CAPABLE
|
|
ZFS_AC_KERNEL_POSIX_ACL_FROM_XATTR_USERNS
|
|
ZFS_AC_KERNEL_POSIX_ACL_RELEASE
|
|
ZFS_AC_KERNEL_SET_CACHED_ACL_USABLE
|
|
ZFS_AC_KERNEL_POSIX_ACL_CHMOD
|
|
ZFS_AC_KERNEL_POSIX_ACL_EQUIV_MODE_WANTS_UMODE_T
|
|
ZFS_AC_KERNEL_POSIX_ACL_VALID_WITH_NS
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_PERMISSION
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_PERMISSION_WITH_NAMEIDATA
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_CHECK_ACL
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_CHECK_ACL_WITH_FLAGS
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_GET_ACL
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_SET_ACL
|
|
ZFS_AC_KERNEL_INODE_OPERATIONS_GETATTR
|
|
ZFS_AC_KERNEL_INODE_SET_FLAGS
|
|
ZFS_AC_KERNEL_INODE_SET_IVERSION
|
|
ZFS_AC_KERNEL_GET_ACL_HANDLE_CACHE
|
|
ZFS_AC_KERNEL_SHOW_OPTIONS
|
|
ZFS_AC_KERNEL_FILE_INODE
|
|
ZFS_AC_KERNEL_FILE_DENTRY
|
|
ZFS_AC_KERNEL_FSYNC
|
|
ZFS_AC_KERNEL_EVICT_INODE
|
|
ZFS_AC_KERNEL_DIRTY_INODE_WITH_FLAGS
|
|
ZFS_AC_KERNEL_NR_CACHED_OBJECTS
|
|
ZFS_AC_KERNEL_FREE_CACHED_OBJECTS
|
|
ZFS_AC_KERNEL_FALLOCATE
|
|
ZFS_AC_KERNEL_AIO_FSYNC
|
|
ZFS_AC_KERNEL_MKDIR_UMODE_T
|
|
ZFS_AC_KERNEL_LOOKUP_NAMEIDATA
|
|
ZFS_AC_KERNEL_CREATE_NAMEIDATA
|
|
ZFS_AC_KERNEL_GET_LINK
|
|
ZFS_AC_KERNEL_PUT_LINK
|
|
ZFS_AC_KERNEL_TMPFILE
|
|
ZFS_AC_KERNEL_TRUNCATE_RANGE
|
|
ZFS_AC_KERNEL_AUTOMOUNT
|
|
ZFS_AC_KERNEL_ENCODE_FH_WITH_INODE
|
|
ZFS_AC_KERNEL_COMMIT_METADATA
|
|
ZFS_AC_KERNEL_CLEAR_INODE
|
|
ZFS_AC_KERNEL_SETATTR_PREPARE
|
|
ZFS_AC_KERNEL_INSERT_INODE_LOCKED
|
|
ZFS_AC_KERNEL_D_MAKE_ROOT
|
|
ZFS_AC_KERNEL_D_OBTAIN_ALIAS
|
|
ZFS_AC_KERNEL_D_PRUNE_ALIASES
|
|
ZFS_AC_KERNEL_D_SET_D_OP
|
|
ZFS_AC_KERNEL_D_REVALIDATE_NAMEIDATA
|
|
ZFS_AC_KERNEL_CONST_DENTRY_OPERATIONS
|
|
ZFS_AC_KERNEL_TRUNCATE_SETSIZE
|
|
ZFS_AC_KERNEL_6ARGS_SECURITY_INODE_INIT_SECURITY
|
|
ZFS_AC_KERNEL_CALLBACK_SECURITY_INODE_INIT_SECURITY
|
|
ZFS_AC_KERNEL_FST_MOUNT
|
|
ZFS_AC_KERNEL_SHRINK
|
|
ZFS_AC_KERNEL_SHRINK_CONTROL_HAS_NID
|
|
ZFS_AC_KERNEL_SHRINK_CONTROL_STRUCT
|
|
ZFS_AC_KERNEL_SHRINKER_CALLBACK
|
|
ZFS_AC_KERNEL_S_INSTANCES_LIST_HEAD
|
|
ZFS_AC_KERNEL_S_D_OP
|
|
ZFS_AC_KERNEL_BDI
|
|
ZFS_AC_KERNEL_SET_NLINK
|
|
ZFS_AC_KERNEL_ELEVATOR_CHANGE
|
|
ZFS_AC_KERNEL_5ARG_SGET
|
|
ZFS_AC_KERNEL_LSEEK_EXECUTE
|
|
ZFS_AC_KERNEL_VFS_ITERATE
|
|
ZFS_AC_KERNEL_VFS_RW_ITERATE
|
|
ZFS_AC_KERNEL_GENERIC_WRITE_CHECKS
|
|
ZFS_AC_KERNEL_KMAP_ATOMIC_ARGS
|
|
ZFS_AC_KERNEL_FOLLOW_DOWN_ONE
|
|
ZFS_AC_KERNEL_MAKE_REQUEST_FN
|
|
ZFS_AC_KERNEL_GENERIC_IO_ACCT_3ARG
|
|
ZFS_AC_KERNEL_GENERIC_IO_ACCT_4ARG
|
|
ZFS_AC_KERNEL_FPU
|
|
ZFS_AC_KERNEL_KUID_HELPERS
|
|
ZFS_AC_KERNEL_MODULE_PARAM_CALL_CONST
|
|
ZFS_AC_KERNEL_RENAME_WANTS_FLAGS
|
|
ZFS_AC_KERNEL_HAVE_GENERIC_SETXATTR
|
|
ZFS_AC_KERNEL_CURRENT_TIME
|
|
ZFS_AC_KERNEL_GLOBAL_PAGE_STATE
|
|
ZFS_AC_KERNEL_ACL_HAS_REFCOUNT
|
|
ZFS_AC_KERNEL_USERNS_CAPABILITIES
|
|
|
|
AS_IF([test "$LINUX_OBJ" != "$LINUX"], [
|
|
KERNEL_MAKE="$KERNEL_MAKE O=$LINUX_OBJ"
|
|
])
|
|
|
|
AC_SUBST(KERNEL_MAKE)
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect name used for Module.symvers file in kernel
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_MODULE_SYMVERS], [
|
|
modpost=$LINUX/scripts/Makefile.modpost
|
|
AC_MSG_CHECKING([kernel file name for module symbols])
|
|
AS_IF([test "x$enable_linux_builtin" != xyes -a -f "$modpost"], [
|
|
AS_IF([grep -q Modules.symvers $modpost], [
|
|
LINUX_SYMBOLS=Modules.symvers
|
|
], [
|
|
LINUX_SYMBOLS=Module.symvers
|
|
])
|
|
|
|
AS_IF([test ! -f "$LINUX_OBJ/$LINUX_SYMBOLS"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the kernel devel package for your distribution
|
|
*** is installed. If you are building with a custom kernel, make sure the
|
|
*** kernel is configured, built, and the '--with-linux=PATH' configure
|
|
*** option refers to the location of the kernel source.])
|
|
])
|
|
], [
|
|
LINUX_SYMBOLS=NONE
|
|
])
|
|
AC_MSG_RESULT($LINUX_SYMBOLS)
|
|
AC_SUBST(LINUX_SYMBOLS)
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect the kernel to be built against
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL], [
|
|
AC_ARG_WITH([linux],
|
|
AS_HELP_STRING([--with-linux=PATH],
|
|
[Path to kernel source]),
|
|
[kernelsrc="$withval"])
|
|
|
|
AC_ARG_WITH(linux-obj,
|
|
AS_HELP_STRING([--with-linux-obj=PATH],
|
|
[Path to kernel build objects]),
|
|
[kernelbuild="$withval"])
|
|
|
|
AC_MSG_CHECKING([kernel source directory])
|
|
AS_IF([test -z "$kernelsrc"], [
|
|
AS_IF([test -e "/lib/modules/$(uname -r)/source"], [
|
|
headersdir="/lib/modules/$(uname -r)/source"
|
|
sourcelink=$(readlink -f "$headersdir")
|
|
], [test -e "/lib/modules/$(uname -r)/build"], [
|
|
headersdir="/lib/modules/$(uname -r)/build"
|
|
sourcelink=$(readlink -f "$headersdir")
|
|
], [
|
|
sourcelink=$(ls -1d /usr/src/kernels/* \
|
|
/usr/src/linux-* \
|
|
2>/dev/null | grep -v obj | tail -1)
|
|
])
|
|
|
|
AS_IF([test -n "$sourcelink" && test -e ${sourcelink}], [
|
|
kernelsrc=`readlink -f ${sourcelink}`
|
|
], [
|
|
kernelsrc="[Not found]"
|
|
])
|
|
], [
|
|
AS_IF([test "$kernelsrc" = "NONE"], [
|
|
kernsrcver=NONE
|
|
])
|
|
withlinux=yes
|
|
])
|
|
|
|
AC_MSG_RESULT([$kernelsrc])
|
|
AS_IF([test ! -d "$kernelsrc"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the kernel devel package for your distribution
|
|
*** is installed and then try again. If that fails, you can specify the
|
|
*** location of the kernel source with the '--with-linux=PATH' option.])
|
|
])
|
|
|
|
AC_MSG_CHECKING([kernel build directory])
|
|
AS_IF([test -z "$kernelbuild"], [
|
|
AS_IF([test x$withlinux != xyes -a -e "/lib/modules/$(uname -r)/build"], [
|
|
kernelbuild=`readlink -f /lib/modules/$(uname -r)/build`
|
|
], [test -d ${kernelsrc}-obj/${target_cpu}/${target_cpu}], [
|
|
kernelbuild=${kernelsrc}-obj/${target_cpu}/${target_cpu}
|
|
], [test -d ${kernelsrc}-obj/${target_cpu}/default], [
|
|
kernelbuild=${kernelsrc}-obj/${target_cpu}/default
|
|
], [test -d `dirname ${kernelsrc}`/build-${target_cpu}], [
|
|
kernelbuild=`dirname ${kernelsrc}`/build-${target_cpu}
|
|
], [
|
|
kernelbuild=${kernelsrc}
|
|
])
|
|
])
|
|
AC_MSG_RESULT([$kernelbuild])
|
|
|
|
AC_MSG_CHECKING([kernel source version])
|
|
utsrelease1=$kernelbuild/include/linux/version.h
|
|
utsrelease2=$kernelbuild/include/linux/utsrelease.h
|
|
utsrelease3=$kernelbuild/include/generated/utsrelease.h
|
|
AS_IF([test -r $utsrelease1 && fgrep -q UTS_RELEASE $utsrelease1], [
|
|
utsrelease=linux/version.h
|
|
], [test -r $utsrelease2 && fgrep -q UTS_RELEASE $utsrelease2], [
|
|
utsrelease=linux/utsrelease.h
|
|
], [test -r $utsrelease3 && fgrep -q UTS_RELEASE $utsrelease3], [
|
|
utsrelease=generated/utsrelease.h
|
|
])
|
|
|
|
AS_IF([test "$utsrelease"], [
|
|
kernsrcver=`(echo "#include <$utsrelease>";
|
|
echo "kernsrcver=UTS_RELEASE") |
|
|
cpp -I $kernelbuild/include |
|
|
grep "^kernsrcver=" | cut -d \" -f 2`
|
|
|
|
AS_IF([test -z "$kernsrcver"], [
|
|
AC_MSG_RESULT([Not found])
|
|
AC_MSG_ERROR([*** Cannot determine kernel version.])
|
|
])
|
|
], [
|
|
AC_MSG_RESULT([Not found])
|
|
if test "x$enable_linux_builtin" != xyes; then
|
|
AC_MSG_ERROR([*** Cannot find UTS_RELEASE definition.])
|
|
else
|
|
AC_MSG_ERROR([
|
|
*** Cannot find UTS_RELEASE definition.
|
|
*** Please run 'make prepare' inside the kernel source tree.])
|
|
fi
|
|
])
|
|
|
|
AC_MSG_RESULT([$kernsrcver])
|
|
|
|
LINUX=${kernelsrc}
|
|
LINUX_OBJ=${kernelbuild}
|
|
LINUX_VERSION=${kernsrcver}
|
|
|
|
AC_SUBST(LINUX)
|
|
AC_SUBST(LINUX_OBJ)
|
|
AC_SUBST(LINUX_VERSION)
|
|
|
|
ZFS_AC_MODULE_SYMVERS
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect the QAT module to be built against
|
|
dnl # QAT provides hardware acceleration for data compression:
|
|
dnl # https://01.org/intel-quickassist-technology
|
|
dnl # * Download and install QAT driver from the above link
|
|
dnl # * Start QAT driver in your system:
|
|
dnl # service qat_service start
|
|
dnl # * Enable QAT in ZFS, e.g.:
|
|
dnl # ./configure --with-qat=<qat-driver-path>/QAT1.6
|
|
dnl # make
|
|
dnl # * Set GZIP compression in ZFS dataset:
|
|
dnl # zfs set compression = gzip <dataset>
|
|
dnl # Then the data written to this ZFS pool is compressed
|
|
dnl # by QAT accelerator automatically, and de-compressed by
|
|
dnl # QAT when read from the pool.
|
|
dnl # * Get QAT hardware statistics by:
|
|
dnl # cat /proc/icp_dh895xcc_dev/qat
|
|
dnl # * To disable QAT:
|
|
dnl # insmod zfs.ko zfs_qat_disable=1
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_QAT], [
|
|
AC_ARG_WITH([qat],
|
|
AS_HELP_STRING([--with-qat=PATH],
|
|
[Path to qat source]),
|
|
AS_IF([test "$withval" = "yes"],
|
|
AC_MSG_ERROR([--with-qat=PATH requires a PATH]),
|
|
[qatsrc="$withval"]))
|
|
|
|
AC_ARG_WITH([qat-obj],
|
|
AS_HELP_STRING([--with-qat-obj=PATH],
|
|
[Path to qat build objects]),
|
|
[qatbuild="$withval"])
|
|
|
|
AS_IF([test ! -z "${qatsrc}"], [
|
|
AC_MSG_CHECKING([qat source directory])
|
|
AC_MSG_RESULT([$qatsrc])
|
|
QAT_SRC="${qatsrc}/quickassist"
|
|
AS_IF([ test ! -e "$QAT_SRC/include/cpa.h"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the qat driver package is installed
|
|
*** and specify the location of the qat source with the
|
|
*** '--with-qat=PATH' option then try again. Failed to
|
|
*** find cpa.h in:
|
|
${QAT_SRC}/include])
|
|
])
|
|
])
|
|
|
|
AS_IF([test ! -z "${qatsrc}"], [
|
|
AC_MSG_CHECKING([qat build directory])
|
|
AS_IF([test -z "$qatbuild"], [
|
|
qatbuild="${qatsrc}/build"
|
|
])
|
|
|
|
AC_MSG_RESULT([$qatbuild])
|
|
QAT_OBJ=${qatbuild}
|
|
AS_IF([ ! test -e "$QAT_OBJ/icp_qa_al.ko" && ! test -e "$QAT_OBJ/qat_api.ko"], [
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the qat driver is installed then try again.
|
|
*** Failed to find icp_qa_al.ko or qat_api.ko in:
|
|
$QAT_OBJ])
|
|
])
|
|
|
|
AC_SUBST(QAT_SRC)
|
|
AC_SUBST(QAT_OBJ)
|
|
|
|
AC_DEFINE(HAVE_QAT, 1,
|
|
[qat is enabled and existed])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Detect the name used for the QAT Module.symvers file.
|
|
dnl #
|
|
AS_IF([test ! -z "${qatsrc}"], [
|
|
AC_MSG_CHECKING([qat file for module symbols])
|
|
QAT_SYMBOLS=$QAT_SRC/lookaside/access_layer/src/Module.symvers
|
|
|
|
AS_IF([test -r $QAT_SYMBOLS], [
|
|
AC_MSG_RESULT([$QAT_SYMBOLS])
|
|
AC_SUBST(QAT_SYMBOLS)
|
|
],[
|
|
AC_MSG_ERROR([
|
|
*** Please make sure the qat driver is installed then try again.
|
|
*** Failed to find Module.symvers in:
|
|
$QAT_SYMBOLS])
|
|
])
|
|
])
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Basic toolchain sanity check.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_TEST_MODULE], [
|
|
AC_MSG_CHECKING([whether modules can be built])
|
|
ZFS_LINUX_TRY_COMPILE([],[],[
|
|
AC_MSG_RESULT([yes])
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
if test "x$enable_linux_builtin" != xyes; then
|
|
AC_MSG_ERROR([*** Unable to build an empty module.])
|
|
else
|
|
AC_MSG_ERROR([
|
|
*** Unable to build an empty module.
|
|
*** Please run 'make scripts' inside the kernel source tree.])
|
|
fi
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Certain kernel build options are not supported. These must be
|
|
dnl # detected at configure time and cause a build failure. Otherwise
|
|
dnl # modules may be successfully built that behave incorrectly.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG], [
|
|
AS_IF([test "x$cross_compiling" != xyes], [
|
|
AC_RUN_IFELSE([
|
|
AC_LANG_PROGRAM([
|
|
#include "$LINUX/include/linux/license.h"
|
|
], [
|
|
return !license_is_gpl_compatible("$ZFS_META_LICENSE");
|
|
])
|
|
], [
|
|
AC_DEFINE([ZFS_IS_GPL_COMPATIBLE], [1],
|
|
[Define to 1 if GPL-only symbols can be used])
|
|
], [
|
|
])
|
|
])
|
|
|
|
ZFS_AC_KERNEL_CONFIG_THREAD_SIZE
|
|
ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC
|
|
ZFS_AC_KERNEL_CONFIG_TRIM_UNUSED_KSYMS
|
|
ZFS_AC_KERNEL_CONFIG_ZLIB_INFLATE
|
|
ZFS_AC_KERNEL_CONFIG_ZLIB_DEFLATE
|
|
])
|
|
|
|
dnl #
|
|
dnl # Check configured THREAD_SIZE
|
|
dnl #
|
|
dnl # The stack size will vary by architecture, but as of Linux 3.15 on x86_64
|
|
dnl # the default thread stack size was increased to 16K from 8K. Therefore,
|
|
dnl # on newer kernels and some architectures stack usage optimizations can be
|
|
dnl # conditionally applied to improve performance without negatively impacting
|
|
dnl # stability.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_THREAD_SIZE], [
|
|
AC_MSG_CHECKING([whether kernel was built with 16K or larger stacks])
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#include <linux/module.h>
|
|
],[
|
|
#if (THREAD_SIZE < 16384)
|
|
#error "THREAD_SIZE is less than 16K"
|
|
#endif
|
|
],[
|
|
AC_MSG_RESULT([yes])
|
|
AC_DEFINE(HAVE_LARGE_STACKS, 1, [kernel has large stacks])
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Check CONFIG_DEBUG_LOCK_ALLOC
|
|
dnl #
|
|
dnl # This is typically only set for debug kernels because it comes with
|
|
dnl # a performance penalty. However, when it is set it maps the non-GPL
|
|
dnl # symbol mutex_lock() to the GPL-only mutex_lock_nested() symbol.
|
|
dnl # This will cause a failure at link time which we'd rather know about
|
|
dnl # at compile time.
|
|
dnl #
|
|
dnl # Since we plan to pursue making mutex_lock_nested() a non-GPL symbol
|
|
dnl # with the upstream community we add a check to detect this case.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_DEBUG_LOCK_ALLOC], [
|
|
|
|
ZFS_LINUX_CONFIG([DEBUG_LOCK_ALLOC], [
|
|
AC_MSG_CHECKING([whether mutex_lock() is GPL-only])
|
|
tmp_flags="$EXTRA_KCFLAGS"
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
|
|
MODULE_LICENSE("$ZFS_META_LICENSE");
|
|
],[
|
|
struct mutex lock;
|
|
|
|
mutex_init(&lock);
|
|
mutex_lock(&lock);
|
|
mutex_unlock(&lock);
|
|
],[
|
|
AC_MSG_RESULT(no)
|
|
],[
|
|
AC_MSG_RESULT(yes)
|
|
AC_MSG_ERROR([
|
|
*** Kernel built with CONFIG_DEBUG_LOCK_ALLOC which is incompatible
|
|
*** with the CDDL license and will prevent the module linking stage
|
|
*** from succeeding. You must rebuild your kernel without this
|
|
*** option enabled.])
|
|
])
|
|
EXTRA_KCFLAGS="$tmp_flags"
|
|
], [])
|
|
])
|
|
|
|
dnl #
|
|
dnl # Check CONFIG_TRIM_UNUSED_KSYMS
|
|
dnl #
|
|
dnl # Verify the kernel has CONFIG_TRIM_UNUSED_KSYMS disabled.
|
|
dnl #
|
|
AC_DEFUN([ZFS_AC_KERNEL_CONFIG_TRIM_UNUSED_KSYMS], [
|
|
AC_MSG_CHECKING([whether CONFIG_TRIM_UNUSED_KSYM is disabled])
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#if defined(CONFIG_TRIM_UNUSED_KSYMS)
|
|
#error CONFIG_TRIM_UNUSED_KSYMS not defined
|
|
#endif
|
|
],[ ],[
|
|
AC_MSG_RESULT([yes])
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
AC_MSG_ERROR([
|
|
*** This kernel has unused symbols trimming enabled, please disable.
|
|
*** Rebuild the kernel with CONFIG_TRIM_UNUSED_KSYMS=n set.])
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_CONFTEST_H
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_CONFTEST_H], [
|
|
cat - <<_ACEOF >conftest.h
|
|
$1
|
|
_ACEOF
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_CONFTEST_C
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_CONFTEST_C], [
|
|
cat confdefs.h - <<_ACEOF >conftest.c
|
|
$1
|
|
_ACEOF
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LANG_PROGRAM(C)([PROLOGUE], [BODY])
|
|
dnl #
|
|
m4_define([ZFS_LANG_PROGRAM], [
|
|
$1
|
|
int
|
|
main (void)
|
|
{
|
|
dnl Do *not* indent the following line: there may be CPP directives.
|
|
dnl Don't move the `;' right after for the same reason.
|
|
$2
|
|
;
|
|
return 0;
|
|
}
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_COMPILE_IFELSE / like AC_COMPILE_IFELSE
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_COMPILE_IFELSE], [
|
|
m4_ifvaln([$1], [ZFS_LINUX_CONFTEST_C([$1])])
|
|
m4_ifvaln([$6], [ZFS_LINUX_CONFTEST_H([$6])], [ZFS_LINUX_CONFTEST_H([])])
|
|
rm -Rf build && mkdir -p build && touch build/conftest.mod.c
|
|
echo "obj-m := conftest.o" >build/Makefile
|
|
modpost_flag=''
|
|
test "x$enable_linux_builtin" = xyes && modpost_flag='modpost=true' # fake modpost stage
|
|
AS_IF(
|
|
[AC_TRY_COMMAND(cp conftest.c conftest.h build && make [$2] -C $LINUX_OBJ EXTRA_CFLAGS="-Werror $FRAME_LARGER_THAN $EXTRA_KCFLAGS" $ARCH_UM M=$PWD/build $modpost_flag) >/dev/null && AC_TRY_COMMAND([$3])],
|
|
[$4],
|
|
[_AC_MSG_LOG_CONFTEST m4_ifvaln([$5],[$5])]
|
|
)
|
|
rm -Rf build
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_TRY_COMPILE like AC_TRY_COMPILE
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_TRY_COMPILE],
|
|
[ZFS_LINUX_COMPILE_IFELSE(
|
|
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
|
|
[modules],
|
|
[test -s build/conftest.o],
|
|
[$3], [$4])
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_CONFIG
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_CONFIG],
|
|
[AC_MSG_CHECKING([whether kernel was built with CONFIG_$1])
|
|
ZFS_LINUX_TRY_COMPILE([
|
|
#include <linux/module.h>
|
|
],[
|
|
#ifndef CONFIG_$1
|
|
#error CONFIG_$1 not #defined
|
|
#endif
|
|
],[
|
|
AC_MSG_RESULT([yes])
|
|
$2
|
|
],[
|
|
AC_MSG_RESULT([no])
|
|
$3
|
|
])
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_CHECK_SYMBOL_EXPORT
|
|
dnl # check symbol exported or not
|
|
dnl #
|
|
AC_DEFUN([ZFS_CHECK_SYMBOL_EXPORT], [
|
|
grep -q -E '[[[:space:]]]$1[[[:space:]]]' \
|
|
$LINUX_OBJ/$LINUX_SYMBOLS 2>/dev/null
|
|
rc=$?
|
|
if test $rc -ne 0; then
|
|
export=0
|
|
for file in $2; do
|
|
grep -q -E "EXPORT_SYMBOL.*($1)" \
|
|
"$LINUX/$file" 2>/dev/null
|
|
rc=$?
|
|
if test $rc -eq 0; then
|
|
export=1
|
|
break;
|
|
fi
|
|
done
|
|
if test $export -eq 0; then :
|
|
$4
|
|
else :
|
|
$3
|
|
fi
|
|
else :
|
|
$3
|
|
fi
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_TRY_COMPILE_SYMBOL
|
|
dnl # like ZFS_LINUX_TRY_COMPILE, except ZFS_CHECK_SYMBOL_EXPORT
|
|
dnl # is called if not compiling for builtin
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_TRY_COMPILE_SYMBOL], [
|
|
ZFS_LINUX_TRY_COMPILE([$1], [$2], [rc=0], [rc=1])
|
|
if test $rc -ne 0; then :
|
|
$6
|
|
else
|
|
if test "x$enable_linux_builtin" != xyes; then
|
|
ZFS_CHECK_SYMBOL_EXPORT([$3], [$4], [rc=0], [rc=1])
|
|
fi
|
|
if test $rc -ne 0; then :
|
|
$6
|
|
else :
|
|
$5
|
|
fi
|
|
fi
|
|
])
|
|
|
|
dnl #
|
|
dnl # ZFS_LINUX_TRY_COMPILE_HEADER
|
|
dnl # like ZFS_LINUX_TRY_COMPILE, except the contents conftest.h are
|
|
dnl # provided via the fifth parameter
|
|
dnl #
|
|
AC_DEFUN([ZFS_LINUX_TRY_COMPILE_HEADER],
|
|
[ZFS_LINUX_COMPILE_IFELSE(
|
|
[AC_LANG_SOURCE([ZFS_LANG_PROGRAM([[$1]], [[$2]])])],
|
|
[modules],
|
|
[test -s build/conftest.o],
|
|
[$3], [$4], [$5])
|
|
])
|