d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7de1daeb93
freebsd-nq/sbin/camcontrol/fwdownload.c
Kenneth D. Merry 0e358df062 Revamp camcontrol(8) fwdownload support and add the opcodes subcommand. 
The significant changes and bugs fixed here are:

1. Fixed a bug in the progress display code:

   When the user's filename is too big, or his terminal width is too
   small, the progress code could wind up using a negative number for
   the length of the "stars" that it uses to indicate progress.

   This negative value was assigned to an unsigned variable, resulting
   in a very large positive value.

   The result is that we wound up writing garbage from memory to the
   user's terminal.

   With an 80 column terminal, a file name length of more than 35
   characters would generate this problem.

   To address this, we now set a minimum progress bar length, and
   truncate the user's file name as needed.

   This has been tested with large filenames and small terminals, and
   at least produces reasonable results.  If the terminal is too
   narrow, the progress display takes up an additional line with each
   update, but this is more user friendly than writing garbage to the
   tty.

2. SATA drives connected via a SATA controller didn't have SCSI Inquiry
   data populated in struct cam_device.  This meant that the code in
   fw_get_vendor() in fwdownload.c would try to match a zero-length
   vendor ID, and so return the first entry in the vendor table.  (Which
   used to be HITACHI.)  Fixed by grabbing identify data, passing the
   identify buffer into fw_get_vendor(), and matching against the model
   name.

3. SATA drives connected via a SAS controller do have Inquiry data
   populated.  The table included a couple of entries -- "ATA ST" and
   "ATA HDS", intended to handle Seagate and Hitachi SATA drives attached
   via a SAS controller.  SCSI to ATA translation layers use a vendor
   ID of "ATA" (which is standard), and then the model name from the ATA
   identify data as the SCSI product name when they are returning data on
   SATA disks.  The cam_strmatch code will match the first part of the
   string (because the length it is given is the length of the vendor,
   "ATA"), and return 0 (i.e. a match).  So all SATA drives attached to
   a SAS controller would be programmed using the Seagate method
   (WRITE BUFFER mode 7) of SCSI firmware downloading.

4. Issue #2 above covered up a bug in fw_download_img() -- if the
   maximum packet size in the vendor table was 0, it tried to default
   to a packet size of 32K.  But then it didn't actually succeed in
   doing that, because it set the packet size to the value that was
   in the vendor table (0).  Now that we actually have ATA attached
   drives fall use the VENDOR_ATA case, we need a reasonable default
   packet size.  So this is fixed to properly set the default packet size.

5. Add support for downloading firmware to IBM LTO drives, and add a
   firmware file validation method to make sure that the firmware
   file matches the drive type.  IBM tape drives include a Load ID and
   RU name in their vendor-specific VPD page 0x3.  Those should match
   the IDs in the header of the firmware file to insure that the
   proper firmware file is loaded.

6. This also adds a new -q option to the camcontrol fwdownload
   subcommand to suppress informational output.  When -q is used in
   combination with -y, the firmware upgrade will happen without
   prompting and without output except if an error condition occurs.

7. Re-add support for printing out SCSI inquiry information when
   asking the user to confirm that they want to download firmware, and
   add printing of ATA Identify data if it is a SATA disk.  This was
   removed in r237281 when support for flashing ATA disks was added.

8. Add a new camcontrol(8) "opcodes" subcommand, and use the
   underlying code to get recommended timeout values for drive
   firmware downloads.

   Many SCSI devices support the REPORT SUPPORTED OPERATION CODES
   command, and some support the optional timeout descriptor that
   specifies nominal and recommended timeouts for the commands
   supported by the device.

   The new camcontrol opcodes subcommand allows displaying all
   opcodes supported by a drive, information about which fields
   in a SCSI CDB are actually used by a given SCSI device, and the
   nominal and recommended timeout values for each command.

   Since firmware downloads can take a long time in some devices, and
   the time varies greatly between different types of devices, take
   advantage of the infrastructure used by the camcontrol opcodes
   subcommand to determine the best timeout to use for the WRITE
   BUFFER command in SCSI device firmware downloads.

   If the device recommends a timeout, it is likely to be more
   accurate than the default 50 second timeout used by the firmware
   download code.  If the user specifies a timeout, it will override
   the default or device recommended timeout.  If the device doesn't
   support timeout descriptors, we fall back to the default.

9. Instead of downloading firmware to SATA drives behind a SAS controller
   using WRITE BUFFER, use the SCSI ATA PASS-THROUGH command to compose
   an ATA DOWNLOAD MICROCODE command and it to the drive.  The previous
   version of this code attempted to send a SCSI WRITE BUFFER command to
   SATA drives behind a SAS controller.  Although that is part of the
   SAT-3 spec, it doesn't work with the parameters used with LSI
   controllers at least.

10.Add a new mechanism for making common ATA passthrough and
   ATA-behind-SCSI passthrough commands.

   The existing camcontrol(8) ATA command mechanism checks the device
   type on every command executed.  That works fine for individual
   commands, but is cumbersome for things like a firmware download
   that send a number of commands.

   The fwdownload code detects the device type up front, and then
   sends the appropriate commands.

11.In simulation mode (-s), if the user specifies the -v flag, print out
   the SCSI CDB or ATA registers that would be sent to the drive.  This will
   aid in debugging any firmware download issues.

sbin/camcontrol/fwdownload.c:
	Add a device type to the fw_vendor structure, so that we can
	specify different download methods for different devices from the
	same vendor.  In this case, IBM hard drives (from when they
	still made hard drives) and tape drives.

	Add a tur_status field to the fw_vendor structure so that we can
	specify whether the drive to be upgraded should be ready, not
	ready, or whether it doesn't matter.  Add the corresponding
	capability in fw_download_img().

	Add comments describing each of the vendor table fields.

	Add HGST and SmrtStor to the supported SCSI vendors list.

	In fw_get_vendor(), look at ATA identify data if we have a SATA
	device to try to identify what the drive vendor is.

	Add IBM firmware file validation.  This gets VPD page 0x3, and
	compares the Load ID and RU name in the page to the values
	included in the header.  The validation code will refuse to load
	a firmware file if the values don't match.  This does allow the
	user to attempt a downgrade; whether or not it succeeds will
	likely depend on the drive settings.

	Add a -q option, and disable all informative output
	(progress bars, etc.) when this is enabled.

	Re-add the inquiry in the confirmation dialog so the user has
	a better idea of which device he is talking to.  Add support for
	displaying ATA identify data.

	Don't automatically disable confirmation in simulation (-s) mode.
	This allows the user to see the inquiry or identify data in the
	dialog, and see exactly what they would see when the command
	actually runs.  Also, in simulation mode, if the user specifies
	the -v flag, print out the SCSI CDB or ATA registers that would
	be sent to the drive.  This will aid in debugging any firmware
	download issues.

	Add a timeout field and timeout type to the firmware download
	vendor table.  This allows specifying a default timeout and allows
	specifying whether we should attempt to probe for a recommended
	timeout from the drive.

	Add a new fuction, fw_get_timeout(), that will determine
	which timeout to use for the WRITE BUFFER command.  If the
	user specifies a timeout, we always use that.  Otherwise,
	we will use the drive recommended timeout, if available,
	and fall back to the default when a drive recommended
	timeout isn't available.

	When we prompt the user, tell him what timeout we're going
	to use, and the source of the timeout.

	Revamp the way SATA devices are handled.

	In fwdownload(), use the new get_device_type() function to
	determine what kind of device we're talking to.

	Allow firmware downloads to any SATA device, but restrict
	SCSI downloads to known devices.  (The latter is not a
	change in behavior.)

	Break out the "ready" check from fw_download_img() into a
	new subfunction, fw_check_device_ready().  This sends the
	appropriate command to the device in question -- a TEST
	UNIT READY or an IDENTIFY.  The IDENTIFY for SATA devices
 	a SAT layer is done using the SCSI ATA PASS-THROUGH
	command.

	Use the new build_ata_cmd() function to build either a SCSI or
	ATA I/O CCB to issue the DOWNLOAD MICROCODE command to SATA
	devices.  build_ata_cmd() figures looks at the devtype argument
	and fills in the correct CCB type and CDB or ATA registers.

	Revamp the vendor table to remove the previous
	vendor-specific ATA entries and use a generic ATA vendor
	placeholder.  We currently use the same method for all ATA
	drives, although we may have to add vendor-specific
	behavior once we test this with more drives.

sbin/camcontrol/progress.c:
	In progress_draw(), make barlength a signed value so that
	we can easily detect a negative value.

	If barlength (the length of the progress bar) would wind up
	negative due to a small TTY width or a large filename,
	set the bar length to the new minimum (10 stars) and
	truncate the user's filename.  We will truncate it down to
	0 characters if necessary.

	Calculate a new prefix_len variable (user's filename length)
	and use it as the precision when printing the filename.

sbin/camcontrol/camcontrol.c:
	Implement a new camcontrol(8) subcommand, "opcodes".  The
	opcodes subcommand allows displaying the entire list of
	SCSI commands supported by a device, or details on an
	individual command.  In either case, it can display
	nominal and recommended timeout values.

	Add the scsiopcodes() function, which calls the new
	scsigetopcodes() function to fetch opcode data from a
	drive.

	Add two new functions, scsiprintoneopcode() and
	scsiprintopcodes(), which print information about one
	opcode or all opcodes, respectively.

	Remove the get_disk_type() function.  It is no longer used.

	Add a new function, dev_has_vpd_page(), that fetches the
	supported INQUIRY VPD list from a device and tells the
	caller whether the requested VPD page is available.

	Add a new function, get_device_type(), that returns a more
	precise device type than the old get_disk_type() function.
	The get_disk_type() function only distinguished between
	SCSI and ATA devices, and SATA devices behind a SCSI to ATA
	translation layer were considered to be "SCSI".

	get_device_type() offers a third type, CC_DT_ATA_BEHIND_SCSI.
	We need to know this to know whether to attempt to send ATA
	passthrough commands.  If the device has the ATA
	Information VPD page (0x89), then it is an ATA device
	behind a SCSI to ATA translation layer.

	Remove the type argument from the fwdownload() subcommand.

	Add a new function, build_ata_cmd(), that will take one set
	of common arguments and build either a SCSI or ATA I/O CCB,
	depending on the device type passed in.

sbin/camcontrol/camcontrol.h:
	Add a prototype for scsigetopcodes().

	Add a new enumeration, camcontrol_devtype.

	Add prototypes for dev_has_vpd_page(), get_device_type()
	and build_ata_cmd().

	Remove the type argument from the fwdownload() subcommand.

sbin/camcontrol/camcontrol.8
	Explain that the fwdownload subcommand will use the drive
	recommended timeout if available, and that the user can
	override the timeout.

	Document the new opcodes subcommand.

	Explain that we will attempt to download firmware to any
	SATA device.

	Document supported SCSI vendors, and models tested if known.

	Explain the commands used to download firmware for the
	three different drive and controller combinations.

	Document that the -v flag in simulation mode for the fwdownload
	subcommand will print out the SCSI CDBs or ATA registers that would
	be used.

sys/cam/scsi/scsi_all.h:
	Add new bit definitions for the one opcode descriptor for
	the REPORT SUPPORTED OPCODES command.

	Add a function prototype for scsi_report_supported_opcodes().

sys/cam/scsi/scsi_all.c:
	Add a new CDB building function, scsi_report_supported_opcodes().

Sponsored by:	Spectra Logic
MFC after:	1 week
2015-08-20 16:07:51 +00:00

1037 lines
29 KiB
C
Raw Blame History

/*-
* Copyright (c) 2011 Sandvine Incorporated. All rights reserved.
* Copyright (c) 2002-2011 Andre Albsmeier <andre@albsmeier.net>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This software is derived from Andre Albsmeier's fwprog.c which contained
* the following note:
*
* Many thanks goes to Marc Frajola <marc@terasolutions.com> from
* TeraSolutions for the initial idea and his programme for upgrading
* the firmware of I*M DDYS drives.
*/
/*
* BEWARE:
*
* The fact that you see your favorite vendor listed below does not
* imply that your equipment won't break when you use this software
* with it. It only means that the firmware of at least one device type
* of each vendor listed has been programmed successfully using this code.
*
* The -s option simulates a download but does nothing apart from that.
* It can be used to check what chunk sizes would have been used with the
* specified device.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <sys/stat.h>
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <camlib.h>
#include "progress.h"
#include "camcontrol.h"
#define WB_TIMEOUT 50000 /* 50 seconds */
typedef enum {
VENDOR_HGST,
VENDOR_HITACHI,
VENDOR_HP,
VENDOR_IBM,
VENDOR_PLEXTOR,
VENDOR_QUALSTAR,
VENDOR_QUANTUM,
VENDOR_SAMSUNG,
VENDOR_SEAGATE,
VENDOR_SMART,
VENDOR_ATA,
VENDOR_UNKNOWN
} fw_vendor_t;
/*
* FW_TUR_READY: The drive must return good status for a test unit ready.
*
* FW_TUR_NOT_READY: The drive must return not ready status for a test unit
* ready. You may want this in a removable media drive.
*
* FW_TUR_NA: It doesn't matter whether the drive is ready or not.
* This may be the case for a removable media drive.
*/
typedef enum {
FW_TUR_NONE,
FW_TUR_READY,
FW_TUR_NOT_READY,
FW_TUR_NA
} fw_tur_status;
/*
* FW_TIMEOUT_DEFAULT: Attempt to probe for a WRITE BUFFER timeout
* value from the drive. If we get an answer,
* use the Recommended timeout. Otherwise,
* use the default value from the table.
*
* FW_TIMEOUT_DEV_REPORTED: The timeout value was probed directly from
* the device.
*
* FW_TIMEOUT_NO_PROBE: Do not ask the device for a WRITE BUFFER
* timeout value. Use the device-specific
* value.
*
* FW_TIMEOUT_USER_SPEC: The user specified a timeout on the command
* line with the -t option. This overrides any
* probe or default timeout.
*/
typedef enum {
FW_TIMEOUT_DEFAULT,
FW_TIMEOUT_DEV_REPORTED,
FW_TIMEOUT_NO_PROBE,
FW_TIMEOUT_USER_SPEC
} fw_timeout_type;
/*
* type: Enumeration for the particular vendor.
*
* pattern: Pattern to match for the Vendor ID from the SCSI
* Inquiry data.
*
* dev_type: SCSI device type to match, or T_ANY to match any
* device from the given vendor. Note that if there
* is a specific device type listed for a particular
* vendor, it must be listed before a T_ANY entry.
*
* max_pkt_size: Maximum packet size when talking to a device. Note
* that although large data sizes may be supported by
* the target device, they may not be supported by the
* OS or the controller.
*
* cdb_byte2: This specifies byte 2 (byte 1 when counting from 0)
* of the CDB. This is generally the WRITE BUFFER mode.
*
* cdb_byte2_last: This specifies byte 2 for the last chunk of the
* download.
*
* inc_cdb_buffer_id: Increment the buffer ID by 1 for each chunk sent
* down to the drive.
*
* inc_cdb_offset: Increment the offset field in the CDB with the byte
* offset into the firmware file.
*
* tur_status: Pay attention to whether the device is ready before
* upgrading the firmware, or not. See above for the
* values.
*/
struct fw_vendor {
fw_vendor_t type;
const char *pattern;
int dev_type;
int max_pkt_size;
u_int8_t cdb_byte2;
u_int8_t cdb_byte2_last;
int inc_cdb_buffer_id;
int inc_cdb_offset;
fw_tur_status tur_status;
int timeout_ms;
fw_timeout_type timeout_type;
};
/*
* Vendor notes:
*
* HGST: The packets need to be sent in multiples of 4K.
*
* IBM: For LTO and TS drives, the buffer ID is ignored in mode 7 (and
* some other modes). It treats the request as a firmware download.
* The offset (and therefore the length of each chunk sent) needs
* to be a multiple of the offset boundary specified for firmware
* (buffer ID 4) in the read buffer command. At least for LTO-6,
* that seems to be 0, but using a 32K chunk size should satisfy
* most any alignment requirement.
*
* SmrtStor: Mode 5 is also supported, but since the firmware is 400KB or
* so, we can't fit it in a single request in most cases.
*/
static struct fw_vendor vendors_list[] = {
{VENDOR_HGST, "HGST", T_DIRECT,
0x1000, 0x07, 0x07, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_HITACHI, "HITACHI", T_ANY,
0x8000, 0x05, 0x05, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_HP, "HP", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_IBM, "IBM", T_SEQUENTIAL,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_NA, 300 * 1000, FW_TIMEOUT_DEFAULT},
{VENDOR_IBM, "IBM", T_ANY,
0x8000, 0x05, 0x05, 1, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_PLEXTOR, "PLEXTOR", T_ANY,
0x2000, 0x04, 0x05, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_QUALSTAR, "QUALSTAR", T_ANY,
0x2030, 0x05, 0x05, 0, 0, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_QUANTUM, "QUANTUM", T_ANY,
0x2000, 0x04, 0x05, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SAMSUNG, "SAMSUNG", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SEAGATE, "SEAGATE", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
{VENDOR_SMART, "SmrtStor", T_DIRECT,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT, FW_TIMEOUT_DEFAULT},
/*
* We match any ATA device. This is really just a placeholder,
* since we won't actually send a WRITE BUFFER with any of the
* listed parameters. If a SATA device is behind a SAS controller,
* the SCSI to ATA translation code (at least for LSI) doesn't
* generaly translate a SCSI WRITE BUFFER into an ATA DOWNLOAD
* MICROCODE command. So, we use the SCSI ATA PASS_THROUGH command
* to send the ATA DOWNLOAD MICROCODE command instead.
*/
{VENDOR_ATA, "ATA", T_ANY,
0x8000, 0x07, 0x07, 0, 1, FW_TUR_READY, WB_TIMEOUT,
FW_TIMEOUT_NO_PROBE},
{VENDOR_UNKNOWN, NULL, T_ANY,
0x0000, 0x00, 0x00, 0, 0, FW_TUR_NONE, WB_TIMEOUT, FW_TIMEOUT_DEFAULT}
};
struct fw_timeout_desc {
fw_timeout_type timeout_type;
const char *timeout_desc;
};
static const struct fw_timeout_desc fw_timeout_desc_table[] = {
{ FW_TIMEOUT_DEFAULT, "the default" },
{ FW_TIMEOUT_DEV_REPORTED, "recommended by this particular device" },
{ FW_TIMEOUT_NO_PROBE, "the default" },
{ FW_TIMEOUT_USER_SPEC, "what was specified on the command line" }
};
#ifndef ATA_DOWNLOAD_MICROCODE
#define ATA_DOWNLOAD_MICROCODE 0x92
#endif
#define USE_OFFSETS_FEATURE 0x3
#ifndef LOW_SECTOR_SIZE
#define LOW_SECTOR_SIZE 512
#endif
#define ATA_MAKE_LBA(o, p) \
((((((o) / LOW_SECTOR_SIZE) >> 8) & 0xff) << 16) | \
((((o) / LOW_SECTOR_SIZE) & 0xff) << 8) | \
((((p) / LOW_SECTOR_SIZE) >> 8) & 0xff))
#define ATA_MAKE_SECTORS(p) (((p) / 512) & 0xff)
#ifndef UNKNOWN_MAX_PKT_SIZE
#define UNKNOWN_MAX_PKT_SIZE 0x8000
#endif
static struct fw_vendor *fw_get_vendor(struct cam_device *cam_dev,
struct ata_params *ident_buf);
static int fw_get_timeout(struct cam_device *cam_dev, struct fw_vendor *vp,
int retry_count, int timeout);
static int fw_validate_ibm(struct cam_device *dev, int retry_count,
int timeout, int fd, char *buf,
const char *fw_img_path, int quiet);
static char *fw_read_img(struct cam_device *dev, int retry_count,
int timeout, int quiet, const char *fw_img_path,
struct fw_vendor *vp, int *num_bytes);
static int fw_check_device_ready(struct cam_device *dev,
camcontrol_devtype devtype,
struct fw_vendor *vp, int printerrors,
int timeout);
static int fw_download_img(struct cam_device *cam_dev,
struct fw_vendor *vp, char *buf, int img_size,
int sim_mode, int printerrors, int quiet,
int retry_count, int timeout, const char */*name*/,
camcontrol_devtype devtype);
/*
* Find entry in vendors list that belongs to
* the vendor of given cam device.
*/
static struct fw_vendor *
fw_get_vendor(struct cam_device *cam_dev, struct ata_params *ident_buf)
{
char vendor[42];
struct fw_vendor *vp;
if (cam_dev == NULL)
return (NULL);
if (ident_buf != NULL) {
cam_strvis((u_char *)vendor, ident_buf->model,
sizeof(ident_buf->model), sizeof(vendor));
for (vp = vendors_list; vp->pattern != NULL; vp++) {
if (vp->type == VENDOR_ATA)
return (vp);
}
} else {
cam_strvis((u_char *)vendor, (u_char *)cam_dev->inq_data.vendor,
sizeof(cam_dev->inq_data.vendor), sizeof(vendor));
}
for (vp = vendors_list; vp->pattern != NULL; vp++) {
if (!cam_strmatch((const u_char *)vendor,
(const u_char *)vp->pattern, strlen(vendor))) {
if ((vp->dev_type == T_ANY)
|| (vp->dev_type == SID_TYPE(&cam_dev->inq_data)))
break;
}
}
return (vp);
}
static int
fw_get_timeout(struct cam_device *cam_dev, struct fw_vendor *vp,
int retry_count, int timeout)
{
struct scsi_report_supported_opcodes_one *one;
struct scsi_report_supported_opcodes_timeout *td;
uint8_t *buf = NULL;
uint32_t fill_len = 0, cdb_len = 0, rec_timeout = 0;
int retval = 0;
/*
* If the user has specified a timeout on the command line, we let
* him override any default or probed value.
*/
if (timeout != 0) {
vp->timeout_type = FW_TIMEOUT_USER_SPEC;
vp->timeout_ms = timeout;
goto bailout;
}
/*
* Check to see whether we should probe for a timeout for this
* device.
*/
if (vp->timeout_type == FW_TIMEOUT_NO_PROBE)
goto bailout;
retval = scsigetopcodes(/*device*/ cam_dev,
/*opcode_set*/ 1,
/*opcode*/ WRITE_BUFFER,
/*show_sa_errors*/ 1,
/*sa_set*/ 0,
/*service_action*/ 0,
/*timeout_desc*/ 1,
/*retry_count*/ retry_count,
/*timeout*/ 10000,
/*verbose*/ 0,
/*fill_len*/ &fill_len,
/*data_ptr*/ &buf);
/*
* It isn't an error if we can't get a timeout descriptor. We just
* continue on with the default timeout.
*/
if (retval != 0) {
retval = 0;
goto bailout;
}
/*
* Even if the drive didn't return a SCSI error, if we don't have
* enough data to contain the one opcode descriptor, the CDB
* structure and a timeout descriptor, we don't have the timeout
* value we're looking for. So we'll just fall back to the
* default value.
*/
if (fill_len < (sizeof(*one) + sizeof(struct scsi_write_buffer) +
sizeof(*td)))
goto bailout;
one = (struct scsi_report_supported_opcodes_one *)buf;
/*
* If the drive claims to not support the WRITE BUFFER command...
* fall back to the default timeout value and let things fail on
* the actual firmware download.
*/
if ((one->support & RSO_ONE_SUP_MASK) == RSO_ONE_SUP_NOT_SUP)
goto bailout;
cdb_len = scsi_2btoul(one->cdb_length);
td = (struct scsi_report_supported_opcodes_timeout *)
&buf[sizeof(*one) + cdb_len];
rec_timeout = scsi_4btoul(td->recommended_time);
/*
* If the recommended timeout is 0, then the device has probably
* returned a bogus value.
*/
if (rec_timeout == 0)
goto bailout;
/* CAM timeouts are in ms */
rec_timeout *= 1000;
vp->timeout_ms = rec_timeout;
vp->timeout_type = FW_TIMEOUT_DEV_REPORTED;
bailout:
return (retval);
}
#define SVPD_IBM_FW_DESIGNATION 0x03
/*
* IBM LTO and TS tape drives have an INQUIRY VPD page 0x3 with the following
* format:
*/
struct fw_ibm_tape_fw_designation {
uint8_t device;
uint8_t page_code;
uint8_t reserved;
uint8_t length;
uint8_t ascii_length;
uint8_t reserved2[3];
uint8_t load_id[4];
uint8_t fw_rev[4];
uint8_t ptf_number[4];
uint8_t patch_number[4];
uint8_t ru_name[8];
uint8_t lib_seq_num[5];
};
/*
* The firmware for IBM tape drives has the following header format. The
* load_id and ru_name in the header file should match what is returned in
* VPD page 0x3.
*/
struct fw_ibm_tape_fw_header {
uint8_t unspec[4];
uint8_t length[4]; /* Firmware and header! */
uint8_t load_id[4];
uint8_t fw_rev[4];
uint8_t reserved[8];
uint8_t ru_name[8];
};
static int
fw_validate_ibm(struct cam_device *dev, int retry_count, int timeout, int fd,
char *buf, const char *fw_img_path, int quiet)
{
union ccb *ccb;
struct fw_ibm_tape_fw_designation vpd_page;
struct fw_ibm_tape_fw_header *header;
char drive_rev[sizeof(vpd_page.fw_rev) + 1];
char file_rev[sizeof(vpd_page.fw_rev) + 1];
int retval = 1;
ccb = cam_getccb(dev);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
goto bailout;
}
/* cam_getccb cleans up the header, caller has to zero the payload */
bzero(&(&ccb->ccb_h)[1],
sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr));
bzero(&vpd_page, sizeof(vpd_page));
scsi_inquiry(&ccb->csio,
/*retries*/ retry_count,
/*cbfcnp*/ NULL,
/* tag_action */ MSG_SIMPLE_Q_TAG,
/* inq_buf */ (u_int8_t *)&vpd_page,
/* inq_len */ sizeof(vpd_page),
/* evpd */ 1,
/* page_code */ SVPD_IBM_FW_DESIGNATION,
/* sense_len */ SSD_FULL_SIZE,
/* timeout */ timeout ? timeout : 5000);
/* Disable freezing the device queue */
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
if (retry_count != 0)
ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER;
if (cam_send_ccb(dev, ccb) < 0) {
warn("error getting firmware designation page");
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
cam_freeccb(ccb);
goto bailout;
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
goto bailout;
}
/*
* Read the firmware header only.
*/
if (read(fd, buf, sizeof(*header)) != sizeof(*header)) {
warn("unable to read %zu bytes from %s", sizeof(*header),
fw_img_path);
goto bailout;
}
/* Rewind the file back to 0 for the full file read. */
if (lseek(fd, 0, SEEK_SET) == -1) {
warn("Unable to lseek");
goto bailout;
}
header = (struct fw_ibm_tape_fw_header *)buf;
bzero(drive_rev, sizeof(drive_rev));
bcopy(vpd_page.fw_rev, drive_rev, sizeof(vpd_page.fw_rev));
bzero(file_rev, sizeof(file_rev));
bcopy(header->fw_rev, file_rev, sizeof(header->fw_rev));
if (quiet == 0) {
fprintf(stdout, "Current Drive Firmware version: %s\n",
drive_rev);
fprintf(stdout, "Firmware File version: %s\n", file_rev);
}
/*
* For IBM tape drives the load ID and RU name reported by the
* drive should match what is in the firmware file.
*/
if (bcmp(vpd_page.load_id, header->load_id,
MIN(sizeof(vpd_page.load_id), sizeof(header->load_id))) != 0) {
warnx("Drive Firmware load ID 0x%x does not match firmware "
"file load ID 0x%x", scsi_4btoul(vpd_page.load_id),
scsi_4btoul(header->load_id));
goto bailout;
}
if (bcmp(vpd_page.ru_name, header->ru_name,
MIN(sizeof(vpd_page.ru_name), sizeof(header->ru_name))) != 0) {
warnx("Drive Firmware RU name 0x%jx does not match firmware "
"file RU name 0x%jx",
(uintmax_t)scsi_8btou64(vpd_page.ru_name),
(uintmax_t)scsi_8btou64(header->ru_name));
goto bailout;
}
if (quiet == 0)
fprintf(stdout, "Firmware file is valid for this drive.\n");
retval = 0;
bailout:
cam_freeccb(ccb);
return (retval);
}
/*
* Allocate a buffer and read fw image file into it
* from given path. Number of bytes read is stored
* in num_bytes.
*/
static char *
fw_read_img(struct cam_device *dev, int retry_count, int timeout, int quiet,
const char *fw_img_path, struct fw_vendor *vp, int *num_bytes)
{
int fd;
struct stat stbuf;
char *buf;
off_t img_size;
int skip_bytes = 0;
if ((fd = open(fw_img_path, O_RDONLY)) < 0) {
warn("Could not open image file %s", fw_img_path);
return (NULL);
}
if (fstat(fd, &stbuf) < 0) {
warn("Could not stat image file %s", fw_img_path);
goto bailout1;
}
if ((img_size = stbuf.st_size) == 0) {
warnx("Zero length image file %s", fw_img_path);
goto bailout1;
}
if ((buf = malloc(img_size)) == NULL) {
warnx("Could not allocate buffer to read image file %s",
fw_img_path);
goto bailout1;
}
/* Skip headers if applicable. */
switch (vp->type) {
case VENDOR_SEAGATE:
if (read(fd, buf, 16) != 16) {
warn("Could not read image file %s", fw_img_path);
goto bailout;
}
if (lseek(fd, 0, SEEK_SET) == -1) {
warn("Unable to lseek");
goto bailout;
}
if ((strncmp(buf, "SEAGATE,SEAGATE ", 16) == 0) ||
(img_size % 512 == 80))
skip_bytes = 80;
break;
case VENDOR_QUALSTAR:
skip_bytes = img_size % 1030;
break;
case VENDOR_IBM: {
if (vp->dev_type != T_SEQUENTIAL)
break;
if (fw_validate_ibm(dev, retry_count, timeout, fd, buf,
fw_img_path, quiet) != 0)
goto bailout;
break;
}
default:
break;
}
if (skip_bytes != 0) {
fprintf(stdout, "Skipping %d byte header.\n", skip_bytes);
if (lseek(fd, skip_bytes, SEEK_SET) == -1) {
warn("Could not lseek");
goto bailout;
}
img_size -= skip_bytes;
}
/* Read image into a buffer. */
if (read(fd, buf, img_size) != img_size) {
warn("Could not read image file %s", fw_img_path);
goto bailout;
}
*num_bytes = img_size;
close(fd);
return (buf);
bailout:
free(buf);
bailout1:
close(fd);
*num_bytes = 0;
return (NULL);
}
/*
* Returns 0 for "success", where success means that the device has met the
* requirement in the vendor structure for being ready or not ready when
* firmware is downloaded.
*
* Returns 1 for a failure to be ready to accept a firmware download.
* (e.g., a drive needs to be ready, but returns not ready)
*
* Returns -1 for any other failure.
*/
static int
fw_check_device_ready(struct cam_device *dev, camcontrol_devtype devtype,
struct fw_vendor *vp, int printerrors, int timeout)
{
union ccb *ccb;
int retval = 0;
int16_t *ptr = NULL;
size_t dxfer_len = 0;
if ((ccb = cam_getccb(dev)) == NULL) {
warnx("Could not allocate CCB");
retval = -1;
goto bailout;
}
bzero(&(&ccb->ccb_h)[1],
sizeof(union ccb) - sizeof(struct ccb_hdr));
if (devtype != CC_DT_SCSI) {
dxfer_len = sizeof(struct ata_params);
ptr = (uint16_t *)malloc(dxfer_len);
if (ptr == NULL) {
warnx("can't malloc memory for identify");
retval = -1;
goto bailout;
}
bzero(ptr, dxfer_len);
}
switch (devtype) {
case CC_DT_SCSI:
scsi_test_unit_ready(&ccb->csio,
/*retries*/ 0,
/*cbfcnp*/ NULL,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ 5000);
break;
case CC_DT_ATA_BEHIND_SCSI:
case CC_DT_ATA: {
build_ata_cmd(ccb,
/*retries*/ 1,
/*flags*/ CAM_DIR_IN,
/*tag_action*/ MSG_SIMPLE_Q_TAG,
/*protocol*/ AP_PROTO_PIO_IN,
/*ata_flags*/ AP_FLAG_BYT_BLOK_BYTES |
AP_FLAG_TLEN_SECT_CNT |
AP_FLAG_TDIR_FROM_DEV,
/*features*/ 0,
/*sector_count*/ (uint8_t) dxfer_len,
/*lba*/ 0,
/*command*/ ATA_ATA_IDENTIFY,
/*data_ptr*/ (uint8_t *)ptr,
/*dxfer_len*/ dxfer_len,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ? timeout : 30 * 1000,
/*is48bit*/ 0,
/*devtype*/ devtype);
break;
}
default:
warnx("Unknown disk type %d", devtype);
retval = -1;
goto bailout;
break; /*NOTREACHED*/
}
ccb->ccb_h.flags |= CAM_DEV_QFRZDIS;
retval = cam_send_ccb(dev, ccb);
if (retval != 0) {
warn("error sending %s CCB", (devtype == CC_DT_SCSI) ?
"Test Unit Ready" : "Identify");
retval = -1;
goto bailout;
}
if (((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
&& (vp->tur_status == FW_TUR_READY)) {
warnx("Device is not ready");
if (printerrors)
cam_error_print(dev, ccb, CAM_ESF_ALL,
CAM_EPF_ALL, stderr);
retval = 1;
goto bailout;
} else if (((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP)
&& (vp->tur_status == FW_TUR_NOT_READY)) {
warnx("Device cannot have media loaded when firmware is "
"downloaded");
retval = 1;
goto bailout;
}
bailout:
if (ccb != NULL)
cam_freeccb(ccb);
return (retval);
}
/*
* Download firmware stored in buf to cam_dev. If simulation mode
* is enabled, only show what packet sizes would be sent to the
* device but do not sent any actual packets
*/
static int
fw_download_img(struct cam_device *cam_dev, struct fw_vendor *vp,
char *buf, int img_size, int sim_mode, int printerrors, int quiet,
int retry_count, int timeout, const char *imgname,
camcontrol_devtype devtype)
{
struct scsi_write_buffer cdb;
progress_t progress;
int size = 0;
union ccb *ccb = NULL;
int pkt_count = 0;
int max_pkt_size;
u_int32_t pkt_size = 0;
char *pkt_ptr = buf;
u_int32_t offset;
int last_pkt = 0;
int retval = 0;
/*
* Check to see whether the device is ready to accept a firmware
* download.
*/
retval = fw_check_device_ready(cam_dev, devtype, vp, printerrors,
timeout);
if (retval != 0)
goto bailout;
if ((ccb = cam_getccb(cam_dev)) == NULL) {
warnx("Could not allocate CCB");
retval = 1;
goto bailout;
}
bzero(&(&ccb->ccb_h)[1],
sizeof(union ccb) - sizeof(struct ccb_hdr));
max_pkt_size = vp->max_pkt_size;
if (max_pkt_size == 0)
max_pkt_size = UNKNOWN_MAX_PKT_SIZE;
pkt_size = max_pkt_size;
progress_init(&progress, imgname, size = img_size);
/* Download single fw packets. */
do {
if (img_size <= max_pkt_size) {
last_pkt = 1;
pkt_size = img_size;
}
progress_update(&progress, size - img_size);
if (((sim_mode == 0) && (quiet == 0))
|| ((sim_mode != 0) && (printerrors == 0)))
progress_draw(&progress);
bzero(&cdb, sizeof(cdb));
switch (devtype) {
case CC_DT_SCSI:
cdb.opcode = WRITE_BUFFER;
cdb.control = 0;
/* Parameter list length. */
scsi_ulto3b(pkt_size, &cdb.length[0]);
offset = vp->inc_cdb_offset ? (pkt_ptr - buf) : 0;
scsi_ulto3b(offset, &cdb.offset[0]);
cdb.byte2 = last_pkt ? vp->cdb_byte2_last :
vp->cdb_byte2;
cdb.buffer_id = vp->inc_cdb_buffer_id ? pkt_count : 0;
/* Zero out payload of ccb union after ccb header. */
bzero(&(&ccb->ccb_h)[1],
sizeof(struct ccb_scsiio) - sizeof(struct ccb_hdr));
/*
* Copy previously constructed cdb into ccb_scsiio
* struct.
*/
bcopy(&cdb, &ccb->csio.cdb_io.cdb_bytes[0],
sizeof(struct scsi_write_buffer));
/* Fill rest of ccb_scsiio struct. */
cam_fill_csio(&ccb->csio, /* ccb_scsiio*/
retry_count, /* retries*/
NULL, /* cbfcnp*/
CAM_DIR_OUT | CAM_DEV_QFRZDIS, /* flags*/
CAM_TAG_ACTION_NONE, /* tag_action*/
(u_char *)pkt_ptr, /* data_ptr*/
pkt_size, /* dxfer_len*/
SSD_FULL_SIZE, /* sense_len*/
sizeof(struct scsi_write_buffer), /* cdb_len*/
timeout ? timeout : WB_TIMEOUT); /* timeout*/
break;
case CC_DT_ATA:
case CC_DT_ATA_BEHIND_SCSI: {
uint32_t off;
off = (uint32_t)(pkt_ptr - buf);
build_ata_cmd(ccb,
/*retry_count*/ retry_count,
/*flags*/ CAM_DIR_OUT | CAM_DEV_QFRZDIS,
/*tag_action*/ CAM_TAG_ACTION_NONE,
/*protocol*/ AP_PROTO_PIO_OUT,
/*ata_flags*/ AP_FLAG_BYT_BLOK_BYTES |
AP_FLAG_TLEN_SECT_CNT |
AP_FLAG_TDIR_TO_DEV,
/*features*/ USE_OFFSETS_FEATURE,
/*sector_count*/ ATA_MAKE_SECTORS(pkt_size),
/*lba*/ ATA_MAKE_LBA(off, pkt_size),
/*command*/ ATA_DOWNLOAD_MICROCODE,
/*data_ptr*/ (uint8_t *)pkt_ptr,
/*dxfer_len*/ pkt_size,
/*sense_len*/ SSD_FULL_SIZE,
/*timeout*/ timeout ? timeout : WB_TIMEOUT,
/*is48bit*/ 0,
/*devtype*/ devtype);
break;
}
default:
warnx("Unknown device type %d", devtype);
retval = 1;
goto bailout;
break; /*NOTREACHED*/
}
if (!sim_mode) {
/* Execute the command. */
if (cam_send_ccb(cam_dev, ccb) < 0 ||
(ccb->ccb_h.status & CAM_STATUS_MASK) !=
CAM_REQ_CMP) {
warnx("Error writing image to device");
if (printerrors)
cam_error_print(cam_dev, ccb,
CAM_ESF_ALL, CAM_EPF_ALL, stderr);
retval = 1;
goto bailout;
}
} else if (printerrors) {
cam_error_print(cam_dev, ccb, CAM_ESF_COMMAND, 0,
stdout);
}
/* Prepare next round. */
pkt_count++;
pkt_ptr += pkt_size;
img_size -= pkt_size;
} while(!last_pkt);
bailout:
if (quiet == 0)
progress_complete(&progress, size - img_size);
if (ccb != NULL)
cam_freeccb(ccb);
return (retval);
}
int
fwdownload(struct cam_device *device, int argc, char **argv,
char *combinedopt, int printerrors, int retry_count, int timeout)
{
struct fw_vendor *vp;
char *fw_img_path = NULL;
struct ata_params *ident_buf = NULL;
camcontrol_devtype devtype;
char *buf = NULL;
int img_size;
int c;
int sim_mode = 0;
int confirmed = 0;
int quiet = 0;
int retval = 0;
while ((c = getopt(argc, argv, combinedopt)) != -1) {
switch (c) {
case 'f':
fw_img_path = optarg;
break;
case 'q':
quiet = 1;
break;
case 's':
sim_mode = 1;
break;
case 'y':
confirmed = 1;
break;
default:
break;
}
}
if (fw_img_path == NULL)
errx(1, "you must specify a firmware image file using -f "
"option");
retval = get_device_type(device, retry_count, timeout, printerrors,
&devtype);
if (retval != 0)
errx(1, "Unable to determine device type");
if ((devtype == CC_DT_ATA)
|| (devtype == CC_DT_ATA_BEHIND_SCSI)) {
union ccb *ccb;
ccb = cam_getccb(device);
if (ccb == NULL) {
warnx("couldn't allocate CCB");
retval = 1;
goto bailout;
}
if (ata_do_identify(device, retry_count, timeout, ccb,
&ident_buf) != 0) {
cam_freeccb(ccb);
retval = 1;
goto bailout;
}
} else if (devtype != CC_DT_SCSI)
errx(1, "Unsupported device type %d", devtype);
vp = fw_get_vendor(device, ident_buf);
/*
* Bail out if we have an unknown vendor and this isn't an ATA
* disk. For a SCSI disk, we have no chance of working properly
* with the default values in the VENDOR_UNKNOWN case. For an ATA
* disk connected via an ATA transport, we may work for drives that
* support the ATA_DOWNLOAD_MICROCODE command.
*/
if (((vp == NULL)
|| (vp->type == VENDOR_UNKNOWN))
&& (devtype == CC_DT_SCSI))
errx(1, "Unsupported device");
retval = fw_get_timeout(device, vp, retry_count, timeout);
if (retval != 0) {
warnx("Unable to get a firmware download timeout value");
goto bailout;
}
buf = fw_read_img(device, retry_count, timeout, quiet, fw_img_path,
vp, &img_size);
if (buf == NULL) {
retval = 1;
goto bailout;
}
if (!confirmed) {
fprintf(stdout, "You are about to download firmware image (%s)"
" into the following device:\n",
fw_img_path);
if (devtype == CC_DT_SCSI) {
if (scsidoinquiry(device, argc, argv, combinedopt, 0,
5000) != 0) {
warnx("Error sending inquiry");
retval = 1;
goto bailout;
}
} else {
printf("%s%d: ", device->device_name,
device->dev_unit_num);
ata_print_ident(ident_buf);
camxferrate(device);
free(ident_buf);
}
fprintf(stdout, "Using a timeout of %u ms, which is %s.\n",
vp->timeout_ms,
fw_timeout_desc_table[vp->timeout_type].timeout_desc);
fprintf(stdout, "\nIt may damage your drive. ");
if (!get_confirmation()) {
retval = 1;
goto bailout;
}
}
if ((sim_mode != 0) && (quiet == 0))
fprintf(stdout, "Running in simulation mode\n");
if (fw_download_img(device, vp, buf, img_size, sim_mode, printerrors,
quiet, retry_count, vp->timeout_ms, fw_img_path, devtype) != 0) {
fprintf(stderr, "Firmware download failed\n");
retval = 1;
goto bailout;
} else if (quiet == 0)
fprintf(stdout, "Firmware download successful\n");
bailout:
free(buf);
return (retval);
}
Reference in New Issue View Git Blame Copy Permalink