d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
7e1770a7bb
freebsd-nq/sys/dev/isp/isp_stds.h
Matt Jacob 387d8239fb ----------- 
MISC CHANGES

Add a new async event- ISP_TARGET_NOTIFY_ACK, that will guarantee
eventual delivery of a NOTIFY ACK. This is tons better than just
ignoring the return from isp_notify_ack and hoping for the best.

Clean up the lower level lun enable code to be a bit more sensible.

Fix a botch in isp_endcmd which was messing up the sense data.

Fix notify ack for SRR to use a sensible error code in the case
of a reject.

Clean up and make clear what kind of firmware we've loaded and
what capabilities it has.
-----------
FULL (252 byte) SENSE DATA

In CTIOs for the ISP, there's only a limimted amount of space
to load SENSE DATA for associated CHECK CONDITIONS (24 or 26
bytes). This makes it difficult to send full SENSE DATA that can
be up to 252 bytes.

Implement MODE 2 responses which have us build the FCP Response
in system memory which the ISP will put onto the wire directly.

On the initiator side, the same problem occurs in that a command
status response only has a limited amount of space for SENSE DATA.
This data is supplemented by status continuation responses that
the ISP pushes onto the response queue after the status response.
We now pull them all together so that full sense data can be
returned to the periph driver.

This is supported on 23XX, 24XX and 25XX cards.

This is also preparation for doing >16 byte CDBs.

-----------
FC TAPE

Implement full FC-TAPE on both initiator and target mode side.  This
capability is driven by firmware loaded, board type, board NVRAM
settings, or hint configuration options to enable or disable. This
is supported for 23XX, 24XX and 25XX cards.

On the initiator side, we pretty much just have to generate a command
reference number for each command we send out. This is FCP-4 compliant
in that we do this per ITL nexus to generate the allowed 1 thru 255
CRN.

In order to support the target side of FC-TAPE, we now pay attention
to more of the PRLI word 3 parameters which will tell us whether
an initiator wants confirmed responses. While we're at it, we'll
pay attention to the initiator view too and report it.

On sending back CTIOs, we will notice whether the initiator wants
confirmed responses and we'll set up flags to do so.

If a response or data frame is lost the initiator sends us an SRR
(Sequence Retransmit Request) ELS which shows up as an SRR notify
and all outstanding CTIOs are nuked with SRR Received status. The
SRR notify contains the offset that the initiator wants us to restart
the data transfer from or to retransmit the response frame.

If the ISP driver still has the CCB around for which the data segment
or response applies, it will retransmit.

However, we typically don't know about a lost data frame until we
send the FCP Response and the initiator totes up counters for data
moved and notices missing segments. In this case we've already
completed the data CCBs already and sent themn back up to the periph
driver.  Because there's no really clean mechanism yet in CAM to
handle this, a hack has been put into place to complete the CTIO
CCB with the CAM_MESSAGE_RECV status which will have a MODIFY DATA
POINTER extended message in it. The internal ISP target groks this
and ctl(8) will be modified to deal with this as well.

At any rate, the data is retransmitted and an an FCP response is
sent. The whole point here is to successfully complete a command
so that you don't have to depend on ULP (SCSI) to have to recover,
which in the case of tape is not really possible (hence the name
FC-TAPE).

Sponsored by: Spectralogic
MFC after:	1 month
2012-07-28 20:06:29 +00:00

290 lines
7.7 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*-
* Copyright (c) 1997-2009 by Matthew Jacob
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* Structures that derive directly from public standards.
*/
#ifndef _ISP_STDS_H
#define _ISP_STDS_H
/*
* FC Frame Header
*
* Source: dpANS-X3.xxx-199x, section 18 (AKA FC-PH-2)
*
*/
typedef struct {
uint8_t r_ctl;
uint8_t d_id[3];
uint8_t cs_ctl;
uint8_t s_id[3];
uint8_t type;
uint8_t f_ctl[3];
uint8_t seq_id;
uint8_t df_ctl;
uint16_t seq_cnt;
uint16_t ox_id;
uint16_t rx_id;
uint32_t parameter;
} fc_hdr_t;
/*
* FCP_CMND_IU Payload
*
* Source: NICTS T10, Project 1144D, Revision 07a, Section 9 (AKA fcp2-r07a)
*
* Notes:
* When additional cdb length is defined in fcp_cmnd_alen_datadir,
* bits 2..7, the actual cdb length is 16 + ((fcp_cmnd_alen_datadir>>2)*4),
* with the datalength following in MSB format just after.
*/
typedef struct {
uint8_t fcp_cmnd_lun[8];
uint8_t fcp_cmnd_crn;
uint8_t fcp_cmnd_task_attribute;
uint8_t fcp_cmnd_task_management;
uint8_t fcp_cmnd_alen_datadir;
union {
struct {
uint8_t fcp_cmnd_cdb[16];
uint32_t fcp_cmnd_dl;
} sf;
struct {
uint8_t fcp_cmnd_cdb[1];
} lf;
} cdb_dl;
} fcp_cmnd_iu_t;
#define FCP_CMND_TASK_ATTR_SIMPLE 0x00
#define FCP_CMND_TASK_ATTR_HEAD 0x01
#define FCP_CMND_TASK_ATTR_ORDERED 0x02
#define FCP_CMND_TASK_ATTR_ACA 0x04
#define FCP_CMND_TASK_ATTR_UNTAGGED 0x05
#define FCP_CMND_TASK_ATTR_MASK 0x07
#define FCP_CMND_ADDTL_CDBLEN_SHIFT 2
#define FCP_CMND_DATA_WRITE 0x01
#define FCP_CMND_DATA_READ 0x02
#define FCP_CMND_DATA_DIR_MASK 0x03
#define FCP_CMND_TMF_CLEAR_ACA 0x40
#define FCP_CMND_TMF_TGT_RESET 0x20
#define FCP_CMND_TMF_LUN_RESET 0x10
#define FCP_CMND_TMF_CLEAR_TASK_SET 0x04
#define FCP_CMND_TMF_ABORT_TASK_SET 0x02
/*
* Basic CT IU Header
*
* Source: X3.288-199x Generic Services 2 Rev 5.3 (FC-GS-2) Section 4.3.1
*/
typedef struct {
uint8_t ct_revision;
uint8_t ct_in_id[3];
uint8_t ct_fcs_type;
uint8_t ct_fcs_subtype;
uint8_t ct_options;
uint8_t ct_reserved0;
uint16_t ct_cmd_resp;
uint16_t ct_bcnt_resid;
uint8_t ct_reserved1;
uint8_t ct_reason;
uint8_t ct_explanation;
uint8_t ct_vunique;
} ct_hdr_t;
#define CT_REVISION 1
#define CT_FC_TYPE_FC 0xFC
#define CT_FC_SUBTYPE_NS 0x02
/*
* RFT_ID Requet CT_IU
*
* Source: NCITS xxx-200x Generic Services- 5 Rev 8.5 Section 5.2.5.30
*/
typedef struct {
ct_hdr_t rftid_hdr;
uint8_t rftid_reserved;
uint8_t rftid_portid[3];
uint32_t rftid_fc4types[8];
} rft_id_t;
/*
* FCP Response IU and bits of interest
* Source: NCITS T10, Project 1828D, Revision 02b (aka FCP4r02b)
*/
typedef struct {
uint8_t fcp_rsp_reserved[8];
uint16_t fcp_rsp_status_qualifier; /* SAM-5 Status Qualifier */
uint8_t fcp_rsp_bits;
uint8_t fcp_rsp_scsi_status; /* SAM-5 SCSI Status Byte */
uint32_t fcp_rsp_resid;
uint32_t fcp_rsp_snslen;
uint32_t fcp_rsp_rsplen;
/*
* In the bytes that follow, it's going to be
* FCP RESPONSE INFO (max 8 bytes, possibly 0)
* FCP SENSE INFO (if any)
* FCP BIDIRECTIONAL READ RESID (if any)
*/
uint8_t fcp_rsp_extra[0];
} fcp_rsp_iu_t;
#define MIN_FCP_RESPONSE_SIZE 24
#define FCP_BIDIR_RSP 0x80 /* Bi-Directional response */
#define FCP_BIDIR_RESID_UNDERFLOW 0x40
#define FCP_BIDIR_RESID_OVERFLOW 0x20
#define FCP_CONF_REQ 0x10
#define FCP_RESID_UNDERFLOW 0x08
#define FCP_RESID_OVERFLOW 0x04
#define FCP_SNSLEN_VALID 0x02
#define FCP_RSPLEN_VALID 0x01
#define FCP_MAX_RSPLEN 0x08
/*
* FCP Response Code Definitions
* Source: NCITS T10, Project 1144D, Revision 08 (aka FCP2r08)
*/
#define FCP_RSPNS_CODE_OFFSET 3
#define FCP_RSPNS_TMF_DONE 0
#define FCP_RSPNS_DLBRSTX 1
#define FCP_RSPNS_BADCMND 2
#define FCP_RSPNS_EROFS 3
#define FCP_RSPNS_TMF_REJECT 4
#define FCP_RSPNS_TMF_FAILED 5
#define FCP_RSPNS_TMF_SUCCEEDED 8
#define FCP_RSPNS_TMF_INCORRECT_LUN 9
/*
* R_CTL field definitions
*
* Bits 31-28 are ROUTING
* Bits 27-24 are INFORMATION
*
* These are nibble values, not bits
*/
#define R_CTL_ROUTE_DATA 0x00
#define R_CTL_ROUTE_ELS 0x02
#define R_CTL_ROUTE_FC4_LINK 0x03
#define R_CTL_ROUTE_VDATA 0x04
#define R_CTL_ROUTE_EXENDED 0x05
#define R_CTL_ROUTE_BASIC 0x08
#define R_CTL_ROUTE_LINK 0x0c
#define R_CTL_ROUTE_EXT_ROUTING 0x0f
#define R_CTL_INFO_UNCATEGORIZED 0x00
#define R_CTL_INFO_SOLICITED_DATA 0x01
#define R_CTL_INFO_UNSOLICITED_CONTROL 0x02
#define R_CTL_INFO_SOLICITED_CONTROL 0x03
#define R_CTL_INFO_UNSOLICITED_DATA 0x04
#define R_CTL_INFO_DATA_DESCRIPTOR 0x05
#define R_CTL_INFO_UNSOLICITED_COMMAND 0x06
#define R_CTL_INFO_COMMAND_STATUS 0x07
#define MAKE_RCTL(a, b) (((a) << 4) | (b))
/* unconverted miscellany */
/*
* Basic FC Link Service defines
*/
/* #define ABTS MAKE_RCTL(R_CTL_ROUTE_BASIC, R_CTL_INFO_SOLICITED_DATA) */
#define BA_ACC MAKE_RCTL(R_CTL_ROUTE_BASIC, R_CTL_INFO_UNSOLICITED_DATA) /* of ABORT */
#define BA_RJT MAKE_RCTL(R_CTL_ROUTE_BASIC, R_CTL_INFO_DATA_DESCRIPTOR) /* of ABORT */
/*
* Link Service Accept/Reject
*/
#define LS_ACC 0x8002
#define LS_RJT 0x8001
/*
* FC ELS Codes- bits 31-24 of the first payload word of an ELS frame.
*/
#define PLOGI 0x03
#define FLOGI 0x04
#define LOGO 0x05
#define ABTX 0x06
#define PRLI 0x20
#define PRLO 0x21
#define SCN 0x22
#define TPRLO 0x24
#define PDISC 0x50
#define ADISC 0x52
#define RNC 0x53
/*
* PRLI Word 3 definitions
* FPC4-r02b January, 2011
*/
#define PRLI_WD3_ENHANCED_DISCOVERY (1 << 11)
#define PRLI_WD3_REC_SUPPORT (1 << 10)
#define PRLI_WD3_TASK_RETRY_IDENTIFICATION_REQUESTED (1 << 9)
#define PRLI_WD3_RETRY (1 << 8)
#define PRLI_WD3_CONFIRMED_COMPLETION_ALLOWED (1 << 7)
#define PRLI_WD3_DATA_OVERLAY_ALLOWED (1 << 6)
#define PRLI_WD3_INITIATOR_FUNCTION (1 << 5)
#define PRLI_WD3_TARGET_FUNCTION (1 << 4)
#define PRLI_WD3_READ_FCP_XFER_RDY_DISABLED (1 << 1) /* definitely supposed to be set */
#define PRLI_WD3_WRITE_FCP_XFER_RDY_DISABLED (1 << 0)
/*
* FC4 defines
*/
#define FC4_IP 5 /* ISO/EEC 8802-2 LLC/SNAP */
#define FC4_SCSI 8 /* SCSI-3 via Fibre Channel Protocol (FCP) */
#define FC4_FC_SVC 0x20 /* Fibre Channel Services */
#ifndef MSG_ABORT
#define MSG_ABORT 0x06
#endif
#ifndef MSG_BUS_DEV_RESET
#define MSG_BUS_DEV_RESET 0x0c
#endif
#ifndef MSG_ABORT_TAG
#define MSG_ABORT_TAG 0x0d
#endif
#ifndef MSG_CLEAR_QUEUE
#define MSG_CLEAR_QUEUE 0x0e
#endif
#ifndef MSG_REL_RECOVERY
#define MSG_REL_RECOVERY 0x10
#endif
#ifndef MSG_TERM_IO_PROC
#define MSG_TERM_IO_PROC 0x11
#endif
#ifndef MSG_LUN_RESET
#define MSG_LUN_RESET 0x17
#endif
#endif /* _ISP_STDS_H */
Reference in New Issue View Git Blame Copy Permalink