freebsd-nq/sys/dev/qlnx/qlnxe/spad_layout.h
2020-09-01 21:57:33 +00:00

213 lines
10 KiB
C

/*
* Copyright (c) 2017-2018 Cavium, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
/****************************************************************************
* Name: spad_layout.h
*
* Description: Global definitions
*
* Created: 01/09/2013
*
****************************************************************************/
/*
* Spad Layout NVM CFG MCP public
*==========================================================================================================
* MCP_REG_SCRATCH REG_RD(MISC_REG_GEN_PURP_CR0) REG_RD(MISC_REG_SHARED_MEM_ADDR)
* +------------------+ +-------------------------+ +-------------------+
* | Num Sections(4B)|Currently 4 | Num Sections(4B) | | Num Sections(4B)|Currently 6
* +------------------+ +-------------------------+ +-------------------+
* | Offsize(Trace) |4B -+ +-- | Offset(NVM_CFG1) | | Offsize(drv_mb) |
* +-| Offsize(NVM_CFG) |4B | | | (Size is fixed) | | Offsize(mfw_mb) |
*+-|-| Offsize(Public) |4B | +-> +-------------------------+ | Offsize(global) |
*| | | Offsize(Private) |4B | | | | Offsize(path) |
*| | +------------------+ <--+ | nvm_cfg1_glob | | Offsize(port) |
*| | | | +-------------------------+ | Offsize(func) |
*| | | Trace | | nvm_cfg1_path 0 | +-------------------+
*| +>+------------------+ | nvm_cfg1_path 1 | | drv_mb PF0/2/4..|8 Funcs of engine0
*| | | +-------------------------+ | drv_mb PF1/3/5..|8 Funcs of engine1
*| | NVM_CFG | | nvm_cfg1_port 0 | +-------------------+
*+-> +------------------+ | .... | | mfw_mb PF0/2/4..|8 Funcs of engine0
* | | | nvm_cfg1_port 3 | | mfw_mb PF1/3/5..|8 Funcs of engine1
* | Public Data | +-------------------------+ +-------------------+
* +------------------+ 8 Funcs of Engine 0| nvm_cfg1_func PF0/2/4/..| | |
* | | 8 Funcs of Engine 1| nvm_cfg1_func PF1/3/5/..| | public_global |
* | Private Data | +-------------------------+ +-------------------+
* +------------------+ | public_path 0 |
* | Code | | public_path 1 |
* | Static Area | +-------------------+
* +--- ---+ | public_port 0 |
* | Code | | .... |
* | PIM Area | | public_port 3 |
* +------------------+ +-------------------+
* | public_func 0/2/4.|8 Funcs of engine0
* | public_func 1/3/5.|8 Funcs of engine1
* +-------------------+
*/
#ifndef SPAD_LAYOUT_H
#define SPAD_LAYOUT_H
#ifndef MDUMP_PARSE_TOOL
#define PORT_0 0
#define PORT_1 1
#define PORT_2 2
#define PORT_3 3
#include "mcp_public.h"
#include "mfw_hsi.h"
#include "nvm_cfg.h"
#ifdef MFW
#include "mcp_private.h"
#endif
extern struct spad_layout g_spad;
/* TBD - Consider renaming to MCP_STATIC_SPAD_SIZE, since the real size includes another 64kb */
#define MCP_SPAD_SIZE 0x00028000 /* 160 KB */
#define SPAD_OFFSET(addr) (((u32)addr - (u32)CPU_SPAD_BASE))
#endif /* MDUMP_PARSE_TOOL */
#define TO_OFFSIZE(_offset, _size) \
(u32)((((u32)(_offset) >> 2) << OFFSIZE_OFFSET_OFFSET) | \
(((u32)(_size) >> 2) << OFFSIZE_SIZE_OFFSET))
enum spad_sections {
SPAD_SECTION_TRACE,
SPAD_SECTION_NVM_CFG,
SPAD_SECTION_PUBLIC,
SPAD_SECTION_PRIVATE,
SPAD_SECTION_MAX /* Cannot be modified anymore since ROM relying on this size !! */
};
#ifndef MDUMP_PARSE_TOOL
struct spad_layout {
struct nvm_cfg nvm_cfg;
struct mcp_public_data public_data;
#ifdef MFW /* Drivers will not be compiled with this flag. */
/* Linux should remove this appearance at all. */
struct mcp_private_data private_data;
#endif
};
#endif /* MDUMP_PARSE_TOOL */
#define STRUCT_OFFSET(f) (STATIC_INIT_BASE + __builtin_offsetof(struct static_init, f))
/* This section is located at a fixed location in the beginning of the scratchpad,
* to ensure that the MCP trace is not run over during MFW upgrade.
* All the rest of data has a floating location which differs from version to version,
* and is pointed by the mcp_meta_data below.
* Moreover, the spad_layout section is part of the MFW firmware, and is loaded with it
* from nvram in order to clear this portion.
*/
struct static_init {
u32 num_sections; /* 0xe20000 */
offsize_t sections[SPAD_SECTION_MAX]; /* 0xe20004 */
#define SECTION(_sec_) *((offsize_t*)(STRUCT_OFFSET(sections[_sec_])))
#ifdef SECURE_BOOT
u32 tim_sha256[8]; /* Used by E5 ROM. Do not relocate */
u32 rom_status_code; /* Used by E5 ROM. Do not relocate */
u32 secure_running_mfw; /* Instead of the one after the trace_buffer */ /* Used by E5 ROM. Do not relocate */
#define SECURE_RUNNING_MFW *((u32*)(STRUCT_OFFSET(secure_running_mfw)))
#endif
struct mcp_trace trace; /* 0xe20014 */
#ifdef MFW
#define MCP_TRACE_P ((struct mcp_trace*)(STRUCT_OFFSET(trace)))
u8 trace_buffer[MCP_TRACE_SIZE]; /* 0xe20030 */
#define MCP_TRACE_BUF ((u8*)(STRUCT_OFFSET(trace_buffer)))
/* running_mfw has the same definition as in nvm_map.h.
* This bit indicate both the running dir, and the running bundle.
* It is set once when the LIM is loaded.
*/
u32 running_mfw; /* 0xe20830 */
#define RUNNING_MFW *((u32*)(STRUCT_OFFSET(running_mfw)))
u32 build_time; /* 0xe20834 */
#define MFW_BUILD_TIME *((u32*)(STRUCT_OFFSET(build_time)))
u32 reset_type; /* 0xe20838 */
#define RESET_TYPE *((u32*)(STRUCT_OFFSET(reset_type)))
u32 mfw_secure_mode; /* 0xe2083c */
#define MFW_SECURE_MODE *((u32*)(STRUCT_OFFSET(mfw_secure_mode)))
u16 pme_status_pf_bitmap; /* 0xe20840 */
#define PME_STATUS_PF_BITMAP *((u16*)(STRUCT_OFFSET(pme_status_pf_bitmap)))
u16 pme_enable_pf_bitmap;
#define PME_ENABLE_PF_BITMAP *((u16*)(STRUCT_OFFSET(pme_enable_pf_bitmap)))
u32 mim_nvm_addr; /* 0xe20844 */
u32 mim_start_addr; /* 0xe20848 */
u32 ah_pcie_link_params; /* 0xe20850 Stores PCIe link configuration at start, so they can be used later also for Hot-Reset, without the need to re-reading them from nvm cfg. */
#define AH_PCIE_LINK_PARAMS_LINK_SPEED_MASK (0x000000ff)
#define AH_PCIE_LINK_PARAMS_LINK_SPEED_OFFSET (0)
#define AH_PCIE_LINK_PARAMS_LINK_WIDTH_MASK (0x0000ff00)
#define AH_PCIE_LINK_PARAMS_LINK_WIDTH_OFFSET (8)
#define AH_PCIE_LINK_PARAMS_ASPM_MODE_MASK (0x00ff0000)
#define AH_PCIE_LINK_PARAMS_ASPM_MODE_OFFSET (16)
#define AH_PCIE_LINK_PARAMS_ASPM_CAP_MASK (0xff000000)
#define AH_PCIE_LINK_PARAMS_ASPM_CAP_OFFSET (24)
#define AH_PCIE_LINK_PARAMS *((u32*)(STRUCT_OFFSET(ah_pcie_link_params)))
u32 flags; /* 0xe20850 */
#define M_GLOB_FLAGS *((u32*)(STRUCT_OFFSET(flags)))
#define FLAGS_VAUX_REQUIRED (1 << 0)
#define FLAGS_WAIT_AVS_READY (1 << 1)
#define FLAGS_FAILURE_ISSUED (1 << 2)
#define FLAGS_FAILURE_DETECTED (1 << 3)
#define FLAGS_VAUX (1 << 4)
#define FLAGS_PERST_ASSERT_OCCURED (1 << 5)
#define FLAGS_HOT_RESET_STEP2 (1 << 6)
#define FLAGS_MSIX_SYNC_ALLOWED (1 << 7)
#define FLAGS_PROGRAM_PCI_COMPLETED (1 << 8)
#define FLAGS_SMBUS_AUX_MODE (1 << 9)
#define FLAGS_PEND_SMBUS_VMAIN_TO_AUX (1 << 10)
#define FLAGS_NVM_CFG_EFUSE_FAILURE (1 << 11)
#define FLAGS_POWER_TRANSITION (1 << 12)
#define FLAGS_MCTP_CHECK_PUMA_TIMEOUT (1 << 13)
#define FLAGS_MCTP_TX_PLDM_UPDATE (1 << 14)
#define FLAGS_MCTP_SENSOR_EVENT (1 << 15)
#define FLAGS_PMBUS_ERROR (1 << 28)
#define FLAGS_OS_DRV_LOADED (1 << 29)
#define FLAGS_OVER_TEMP_OCCUR (1 << 30)
#define FLAGS_FAN_FAIL_OCCUR (1 << 31)
u32 rsrv_persist[4]; /* Persist reserved for MFW upgrades */ /* 0xe20854 */
#endif /* MFW */
};
#ifndef MDUMP_PARSE_TOOL
#define NVM_CFG1(x) g_spad.nvm_cfg.cfg1.x
#define NVM_GLOB(x) NVM_CFG1(glob).x
#define NVM_GLOB_VAL(n, m, o) ((NVM_GLOB(n) & m) >> o)
#endif /* MDUMP_PARSE_TOOL */
#endif /* SPAD_LAYOUT_H */