88cbf0f746
Pulled firmware_ids.h from firmwaresrc and applied genfwdef script. Submitted by: Richard Houldsworth <rhouldsworth at solarflare.com> Reviewed by: gnn Sponsored by: Solarflare Communications, Inc. MFC after: 2 days Differential Revision: https://reviews.freebsd.org/D4897
784 lines
24 KiB
C
784 lines
24 KiB
C
/*-
|
|
* Copyright (c) 2012-2015 Solarflare Communications Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
|
|
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* The views and conclusions contained in the software and documentation are
|
|
* those of the authors and should not be interpreted as representing official
|
|
* policies, either expressed or implied, of the FreeBSD Project.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* These structures define the layouts for the TLV items stored in static and
|
|
* dynamic configuration partitions in NVRAM for EF10 (Huntington etc.).
|
|
*
|
|
* They contain the same sort of information that was kept in the
|
|
* siena_mc_static_config_hdr_t and siena_mc_dynamic_config_hdr_t structures
|
|
* (defined in <ci/mgmt/mc_flash_layout.h> and <ci/mgmt/mc_dynamic_cfg.h>) for
|
|
* Siena.
|
|
*
|
|
* These are used directly by the MC and should also be usable directly on host
|
|
* systems which are little-endian and do not do strange things with structure
|
|
* padding. (Big-endian host systems will require some byte-swapping.)
|
|
*
|
|
* -----
|
|
*
|
|
* Please refer to SF-108797-SW for a general overview of the TLV partition
|
|
* format.
|
|
*
|
|
* -----
|
|
*
|
|
* The current tag IDs have a general structure: with the exception of the
|
|
* special values defined in the document, they are of the form 0xLTTTNNNN,
|
|
* where:
|
|
*
|
|
* - L is a location, indicating where this tag is expected to be found:
|
|
* 0 for static configuration, or 1 for dynamic configuration. Other
|
|
* values are reserved.
|
|
*
|
|
* - TTT is a type, which is just a unique value. The same type value
|
|
* might appear in both locations, indicating a relationship between
|
|
* the items (e.g. static and dynamic VPD below).
|
|
*
|
|
* - NNNN is an index of some form. Some item types are per-port, some
|
|
* are per-PF, some are per-partition-type.
|
|
*
|
|
* -----
|
|
*
|
|
* As with the previous Siena structures, each structure here is laid out
|
|
* carefully: values are aligned to their natural boundary, with explicit
|
|
* padding fields added where necessary. (No, technically this does not
|
|
* absolutely guarantee portability. But, in practice, compilers are generally
|
|
* sensible enough not to introduce completely pointless padding, and it works
|
|
* well enough.)
|
|
*/
|
|
|
|
|
|
#ifndef CI_MGMT_TLV_LAYOUT_H
|
|
#define CI_MGMT_TLV_LAYOUT_H
|
|
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* General structure (defined by SF-108797-SW)
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
|
|
/* The "end" tag.
|
|
*
|
|
* (Note that this is *not* followed by length or value fields: anything after
|
|
* the tag itself is irrelevant.)
|
|
*/
|
|
|
|
#define TLV_TAG_END (0xEEEEEEEE)
|
|
|
|
|
|
/* Other special reserved tag values.
|
|
*/
|
|
|
|
#define TLV_TAG_SKIP (0x00000000)
|
|
#define TLV_TAG_INVALID (0xFFFFFFFF)
|
|
|
|
|
|
/* TLV partition header.
|
|
*
|
|
* In a TLV partition, this must be the first item in the sequence, at offset
|
|
* 0.
|
|
*/
|
|
|
|
#define TLV_TAG_PARTITION_HEADER (0xEF10DA7A)
|
|
|
|
struct tlv_partition_header {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t type_id;
|
|
uint16_t reserved;
|
|
uint32_t generation;
|
|
uint32_t total_length;
|
|
};
|
|
|
|
|
|
/* TLV partition trailer.
|
|
*
|
|
* In a TLV partition, this must be the last item in the sequence, immediately
|
|
* preceding the TLV_TAG_END word.
|
|
*/
|
|
|
|
#define TLV_TAG_PARTITION_TRAILER (0xEF101A57)
|
|
|
|
struct tlv_partition_trailer {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t generation;
|
|
uint32_t checksum;
|
|
};
|
|
|
|
|
|
/* Appendable TLV partition header.
|
|
*
|
|
* In an appendable TLV partition, this must be the first item in the sequence,
|
|
* at offset 0. (Note that, unlike the configuration partitions, there is no
|
|
* trailer before the TLV_TAG_END word.)
|
|
*/
|
|
|
|
#define TLV_TAG_APPENDABLE_PARTITION_HEADER (0xEF10ADA7)
|
|
|
|
struct tlv_appendable_partition_header {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t type_id;
|
|
uint16_t reserved;
|
|
};
|
|
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* Configuration items
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
|
|
/* NIC global capabilities.
|
|
*/
|
|
|
|
#define TLV_TAG_GLOBAL_CAPABILITIES (0x00010000)
|
|
|
|
struct tlv_global_capabilities {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t flags;
|
|
};
|
|
|
|
|
|
/* Siena-style per-port MAC address allocation.
|
|
*
|
|
* There are <count> addresses, starting at <base_address> and incrementing
|
|
* by adding <stride> to the low-order byte(s).
|
|
*
|
|
* (See also TLV_TAG_GLOBAL_MAC for an alternative, specifying a global pool
|
|
* of contiguous MAC addresses for the firmware to allocate as it sees fit.)
|
|
*/
|
|
|
|
#define TLV_TAG_PORT_MAC(port) (0x00020000 + (port))
|
|
|
|
struct tlv_port_mac {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t base_address[6];
|
|
uint16_t reserved;
|
|
uint16_t count;
|
|
uint16_t stride;
|
|
};
|
|
|
|
|
|
/* Static VPD.
|
|
*
|
|
* This is the portion of VPD which is set at manufacturing time and not
|
|
* expected to change. It is formatted as a standard PCI VPD block. There are
|
|
* global and per-pf TLVs for this, the global TLV is new for Medford and is
|
|
* used in preference to the per-pf TLV.
|
|
*/
|
|
|
|
#define TLV_TAG_PF_STATIC_VPD(pf) (0x00030000 + (pf))
|
|
|
|
struct tlv_pf_static_vpd {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t bytes[];
|
|
};
|
|
|
|
#define TLV_TAG_GLOBAL_STATIC_VPD (0x001f0000)
|
|
|
|
struct tlv_global_static_vpd {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t bytes[];
|
|
};
|
|
|
|
|
|
/* Dynamic VPD.
|
|
*
|
|
* This is the portion of VPD which may be changed (e.g. by firmware updates).
|
|
* It is formatted as a standard PCI VPD block. There are global and per-pf TLVs
|
|
* for this, the global TLV is new for Medford and is used in preference to the
|
|
* per-pf TLV.
|
|
*/
|
|
|
|
#define TLV_TAG_PF_DYNAMIC_VPD(pf) (0x10030000 + (pf))
|
|
|
|
struct tlv_pf_dynamic_vpd {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t bytes[];
|
|
};
|
|
|
|
#define TLV_TAG_GLOBAL_DYNAMIC_VPD (0x10200000)
|
|
|
|
struct tlv_global_dynamic_vpd {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t bytes[];
|
|
};
|
|
|
|
|
|
/* "DBI" PCI config space changes.
|
|
*
|
|
* This is a set of edits made to the default PCI config space values before
|
|
* the device is allowed to enumerate. There are global and per-pf TLVs for
|
|
* this, the global TLV is new for Medford and is used in preference to the
|
|
* per-pf TLV.
|
|
*/
|
|
|
|
#define TLV_TAG_PF_DBI(pf) (0x00040000 + (pf))
|
|
|
|
struct tlv_pf_dbi {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
struct {
|
|
uint16_t addr;
|
|
uint16_t byte_enables;
|
|
uint32_t value;
|
|
} items[];
|
|
};
|
|
|
|
|
|
#define TLV_TAG_GLOBAL_DBI (0x00210000)
|
|
|
|
struct tlv_global_dbi {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
struct {
|
|
uint16_t addr;
|
|
uint16_t byte_enables;
|
|
uint32_t value;
|
|
} items[];
|
|
};
|
|
|
|
|
|
/* Partition subtype codes.
|
|
*
|
|
* A subtype may optionally be stored for each type of partition present in
|
|
* the NVRAM. For example, this may be used to allow a generic firmware update
|
|
* utility to select a specific variant of firmware for a specific variant of
|
|
* board.
|
|
*
|
|
* The description[] field is an optional string which is returned in the
|
|
* MC_CMD_NVRAM_METADATA response if present.
|
|
*/
|
|
|
|
#define TLV_TAG_PARTITION_SUBTYPE(type) (0x00050000 + (type))
|
|
|
|
struct tlv_partition_subtype {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t subtype;
|
|
uint8_t description[];
|
|
};
|
|
|
|
|
|
/* Partition version codes.
|
|
*
|
|
* A version may optionally be stored for each type of partition present in
|
|
* the NVRAM. This provides a standard way of tracking the currently stored
|
|
* version of each of the various component images.
|
|
*/
|
|
|
|
#define TLV_TAG_PARTITION_VERSION(type) (0x10060000 + (type))
|
|
|
|
struct tlv_partition_version {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t version_w;
|
|
uint16_t version_x;
|
|
uint16_t version_y;
|
|
uint16_t version_z;
|
|
};
|
|
|
|
/* Global PCIe configuration */
|
|
|
|
#define TLV_TAG_GLOBAL_PCIE_CONFIG (0x10070000)
|
|
|
|
struct tlv_pcie_config {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
int16_t max_pf_number; /**< Largest PF RID (lower PFs may be hidden) */
|
|
uint16_t pf_aper; /**< BIU aperture for PF BAR2 */
|
|
uint16_t vf_aper; /**< BIU aperture for VF BAR0 */
|
|
uint16_t int_aper; /**< BIU aperture for PF BAR4 and VF BAR2 */
|
|
#define TLV_MAX_PF_DEFAULT (-1) /* Use FW default for largest PF RID */
|
|
#define TLV_APER_DEFAULT (0xFFFF) /* Use FW default for a given aperture */
|
|
};
|
|
|
|
/* Per-PF configuration. Note that not all these fields are necessarily useful
|
|
* as the apertures are constrained by the BIU settings (the one case we do
|
|
* use is to make BAR2 bigger than the BIU thinks to reserve space), but we can
|
|
* tidy things up later */
|
|
|
|
#define TLV_TAG_PF_PCIE_CONFIG(pf) (0x10080000 + (pf))
|
|
|
|
struct tlv_per_pf_pcie_config {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t vfs_total;
|
|
uint8_t port_allocation;
|
|
uint16_t vectors_per_pf;
|
|
uint16_t vectors_per_vf;
|
|
uint8_t pf_bar0_aperture;
|
|
uint8_t pf_bar2_aperture;
|
|
uint8_t vf_bar0_aperture;
|
|
uint8_t vf_base;
|
|
uint16_t supp_pagesz;
|
|
uint16_t msix_vec_base;
|
|
};
|
|
|
|
|
|
/* Development ONLY. This is a single TLV tag for all the gubbins
|
|
* that can be set through the MC command-line other than the PCIe
|
|
* settings. This is a temporary measure. */
|
|
#define TLV_TAG_TMP_GUBBINS (0x10090000) /* legacy symbol - do not use */
|
|
#define TLV_TAG_TMP_GUBBINS_HUNT TLV_TAG_TMP_GUBBINS
|
|
|
|
struct tlv_tmp_gubbins {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
/* Consumed by dpcpu.c */
|
|
uint64_t tx0_tags; /* Bitmap */
|
|
uint64_t tx1_tags; /* Bitmap */
|
|
uint64_t dl_tags; /* Bitmap */
|
|
uint32_t flags;
|
|
#define TLV_DPCPU_TX_STRIPE (1) /* No longer used, has no effect */
|
|
#define TLV_DPCPU_BIU_TAGS (2) /* Use BIU tag manager */
|
|
#define TLV_DPCPU_TX0_TAGS (4) /* tx0_tags is valid */
|
|
#define TLV_DPCPU_TX1_TAGS (8) /* tx1_tags is valid */
|
|
#define TLV_DPCPU_DL_TAGS (16) /* dl_tags is valid */
|
|
/* Consumed by features.c */
|
|
uint32_t dut_features; /* All 1s -> leave alone */
|
|
int8_t with_rmon; /* 0 -> off, 1 -> on, -1 -> leave alone */
|
|
/* Consumed by clocks_hunt.c */
|
|
int8_t clk_mode; /* 0 -> off, 1 -> on, -1 -> leave alone */
|
|
/* Consumed by sram.c */
|
|
int8_t rx_dc_size; /* -1 -> leave alone */
|
|
int8_t tx_dc_size;
|
|
int16_t num_q_allocs;
|
|
};
|
|
|
|
/* Global port configuration
|
|
*
|
|
* This is now deprecated in favour of a platform-provided default
|
|
* and dynamic config override via tlv_global_port_options.
|
|
*/
|
|
#define TLV_TAG_GLOBAL_PORT_CONFIG (0x000a0000)
|
|
|
|
struct tlv_global_port_config {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t ports_per_core;
|
|
uint32_t max_port_speed;
|
|
};
|
|
|
|
|
|
/* Firmware options.
|
|
*
|
|
* This is intended for user-configurable selection of optional firmware
|
|
* features and variants.
|
|
*
|
|
* Initially, this consists only of the satellite CPU firmware variant
|
|
* selection, but this tag could be extended in the future (using the
|
|
* tag length to determine whether additional fields are present).
|
|
*/
|
|
|
|
#define TLV_TAG_FIRMWARE_OPTIONS (0x100b0000)
|
|
|
|
struct tlv_firmware_options {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t firmware_variant;
|
|
#define TLV_FIRMWARE_VARIANT_DRIVER_SELECTED (0xffffffff)
|
|
|
|
/* These are the values for overriding the driver's choice; the definitions
|
|
* are taken from MCDI so that they don't get out of step. Include
|
|
* <ci/mgmt/mc_driver_pcol.h> or the equivalent from your driver's tree if
|
|
* you need to use these constants.
|
|
*/
|
|
#define TLV_FIRMWARE_VARIANT_FULL_FEATURED MC_CMD_FW_FULL_FEATURED
|
|
#define TLV_FIRMWARE_VARIANT_LOW_LATENCY MC_CMD_FW_LOW_LATENCY
|
|
#define TLV_FIRMWARE_VARIANT_PACKED_STREAM MC_CMD_FW_PACKED_STREAM
|
|
#define TLV_FIRMWARE_VARIANT_HIGH_TX_RATE MC_CMD_FW_HIGH_TX_RATE
|
|
#define TLV_FIRMWARE_VARIANT_PACKED_STREAM_HASH_MODE_1 \
|
|
MC_CMD_FW_PACKED_STREAM_HASH_MODE_1
|
|
};
|
|
|
|
/* Voltage settings
|
|
*
|
|
* Intended for boards with A0 silicon where the core voltage may
|
|
* need tweaking. Most likely set once when the pass voltage is
|
|
* determined. */
|
|
|
|
#define TLV_TAG_0V9_SETTINGS (0x000c0000)
|
|
|
|
struct tlv_0v9_settings {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t flags; /* Boards with high 0v9 settings may need active cooling */
|
|
#define TLV_TAG_0V9_REQUIRES_FAN (1)
|
|
uint16_t target_voltage; /* In millivolts */
|
|
/* Since the limits are meant to be centred to the target (and must at least
|
|
* contain it) they need setting as well. */
|
|
uint16_t warn_low; /* In millivolts */
|
|
uint16_t warn_high; /* In millivolts */
|
|
uint16_t panic_low; /* In millivolts */
|
|
uint16_t panic_high; /* In millivolts */
|
|
};
|
|
|
|
|
|
/* Clock configuration */
|
|
|
|
#define TLV_TAG_CLOCK_CONFIG (0x000d0000) /* legacy symbol - do not use */
|
|
#define TLV_TAG_CLOCK_CONFIG_HUNT TLV_TAG_CLOCK_CONFIG
|
|
|
|
struct tlv_clock_config {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t clk_sys; /* MHz */
|
|
uint16_t clk_dpcpu; /* MHz */
|
|
uint16_t clk_icore; /* MHz */
|
|
uint16_t clk_pcs; /* MHz */
|
|
};
|
|
|
|
#define TLV_TAG_CLOCK_CONFIG_MEDFORD (0x00100000)
|
|
|
|
struct tlv_clock_config_medford {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t clk_sys; /* MHz */
|
|
uint16_t clk_mc; /* MHz */
|
|
uint16_t clk_rmon; /* MHz */
|
|
uint16_t clk_vswitch; /* MHz */
|
|
uint16_t clk_dpcpu; /* MHz */
|
|
uint16_t clk_pcs; /* MHz */
|
|
};
|
|
|
|
|
|
/* EF10-style global pool of MAC addresses.
|
|
*
|
|
* There are <count> addresses, starting at <base_address>, which are
|
|
* contiguous. Firmware is responsible for allocating addresses from this
|
|
* pool to ports / PFs as appropriate.
|
|
*/
|
|
|
|
#define TLV_TAG_GLOBAL_MAC (0x000e0000)
|
|
|
|
struct tlv_global_mac {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t base_address[6];
|
|
uint16_t reserved1;
|
|
uint16_t count;
|
|
uint16_t reserved2;
|
|
};
|
|
|
|
#define TLV_TAG_ATB_0V9_TARGET (0x000f0000) /* legacy symbol - do not use */
|
|
#define TLV_TAG_ATB_0V9_TARGET_HUNT TLV_TAG_ATB_0V9_TARGET
|
|
|
|
/* The target value for the 0v9 power rail measured on-chip at the
|
|
* analogue test bus */
|
|
struct tlv_0v9_atb_target {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t millivolts;
|
|
uint16_t reserved;
|
|
};
|
|
|
|
/* Global PCIe configuration, second revision. This represents the visible PFs
|
|
* by a bitmap rather than having the number of the highest visible one. As such
|
|
* it can (for a 16-PF chip) represent a superset of what TLV_TAG_GLOBAL_PCIE_CONFIG
|
|
* can and it should be used in place of that tag in future (but compatibility with
|
|
* the old tag will be left in the firmware indefinitely). */
|
|
|
|
#define TLV_TAG_GLOBAL_PCIE_CONFIG_R2 (0x10100000)
|
|
|
|
struct tlv_pcie_config_r2 {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t visible_pfs; /**< Bitmap of visible PFs */
|
|
uint16_t pf_aper; /**< BIU aperture for PF BAR2 */
|
|
uint16_t vf_aper; /**< BIU aperture for VF BAR0 */
|
|
uint16_t int_aper; /**< BIU aperture for PF BAR4 and VF BAR2 */
|
|
};
|
|
|
|
/* Dynamic port mode.
|
|
*
|
|
* Allows selecting alternate port configuration for platforms that support it
|
|
* (e.g. 1x40G vs 2x10G on Milano, 1x40G vs 4x10G on Medford). This affects the
|
|
* number of externally visible ports (and, hence, PF to port mapping), so must
|
|
* be done at boot time.
|
|
*
|
|
* This tag supercedes tlv_global_port_config.
|
|
*/
|
|
|
|
#define TLV_TAG_GLOBAL_PORT_MODE (0x10110000)
|
|
|
|
struct tlv_global_port_mode {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t port_mode;
|
|
#define TLV_PORT_MODE_DEFAULT (0xffffffff) /* Default for given platform */
|
|
#define TLV_PORT_MODE_10G (0) /* 10G, single SFP/10G-KR */
|
|
#define TLV_PORT_MODE_40G (1) /* 40G, single QSFP/40G-KR */
|
|
#define TLV_PORT_MODE_10G_10G (2) /* 2x10G, dual SFP/10G-KR or single QSFP */
|
|
#define TLV_PORT_MODE_40G_40G (3) /* 40G + 40G, dual QSFP/40G-KR (Greenport, Medford) */
|
|
#define TLV_PORT_MODE_10G_10G_10G_10G (4) /* 2x10G + 2x10G, quad SFP/10G-KR or dual QSFP (Greenport, Medford) */
|
|
#define TLV_PORT_MODE_10G_10G_10G_10G_Q (5) /* 4x10G, single QSFP, cage 0 (Medford) */
|
|
#define TLV_PORT_MODE_40G_10G_10G (6) /* 1x40G + 2x10G, dual QSFP (Greenport, Medford) */
|
|
#define TLV_PORT_MODE_10G_10G_40G (7) /* 2x10G + 1x40G, dual QSFP (Greenport, Medford) */
|
|
#define TLV_PORT_MODE_10G_10G_10G_10G_Q2 (8) /* 4x10G, single QSFP, cage 1 (Medford) */
|
|
#define TLV_PORT_MODE_MAX TLV_PORT_MODE_10G_10G_10G_10G_Q2
|
|
};
|
|
|
|
/* Type of the v-switch created implicitly by the firmware */
|
|
|
|
#define TLV_TAG_VSWITCH_TYPE(port) (0x10120000 + (port))
|
|
|
|
struct tlv_vswitch_type {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t vswitch_type;
|
|
#define TLV_VSWITCH_TYPE_DEFAULT (0xffffffff) /* Firmware default; equivalent to no TLV present for a given port */
|
|
#define TLV_VSWITCH_TYPE_NONE (0)
|
|
#define TLV_VSWITCH_TYPE_VLAN (1)
|
|
#define TLV_VSWITCH_TYPE_VEB (2)
|
|
#define TLV_VSWITCH_TYPE_VEPA (3)
|
|
#define TLV_VSWITCH_TYPE_MUX (4)
|
|
#define TLV_VSWITCH_TYPE_TEST (5)
|
|
};
|
|
|
|
/* A VLAN tag for the v-port created implicitly by the firmware */
|
|
|
|
#define TLV_TAG_VPORT_VLAN_TAG(pf) (0x10130000 + (pf))
|
|
|
|
struct tlv_vport_vlan_tag {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t vlan_tag;
|
|
#define TLV_VPORT_NO_VLAN_TAG (0xFFFFFFFF) /* Default in the absence of TLV for a given PF */
|
|
};
|
|
|
|
/* Offset to be applied to the 0v9 setting, wherever it came from */
|
|
|
|
#define TLV_TAG_ATB_0V9_OFFSET (0x10140000)
|
|
|
|
struct tlv_0v9_atb_offset {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
int16_t offset_millivolts;
|
|
uint16_t reserved;
|
|
};
|
|
|
|
/* A privilege mask given on reset to all non-admin PCIe functions (that is other than first-PF-per-port).
|
|
* The meaning of particular bits is defined in mcdi_ef10.yml under MC_CMD_PRIVILEGE_MASK, see also bug 44583.
|
|
* TLV_TAG_PRIVILEGE_MASK_ADD specifies bits that should be added (ORed) to firmware default while
|
|
* TLV_TAG_PRIVILEGE_MASK_REM specifies bits that should be removed (ANDed) from firmware default:
|
|
* Initial_privilege_mask = (firmware_default_mask | privilege_mask_add) & ~privilege_mask_rem */
|
|
|
|
#define TLV_TAG_PRIVILEGE_MASK (0x10150000) /* legacy symbol - do not use */
|
|
|
|
struct tlv_privilege_mask { /* legacy structure - do not use */
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t privilege_mask;
|
|
};
|
|
|
|
#define TLV_TAG_PRIVILEGE_MASK_ADD (0x10150000)
|
|
|
|
struct tlv_privilege_mask_add {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t privilege_mask_add;
|
|
};
|
|
|
|
#define TLV_TAG_PRIVILEGE_MASK_REM (0x10160000)
|
|
|
|
struct tlv_privilege_mask_rem {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t privilege_mask_rem;
|
|
};
|
|
|
|
/* Additional privileges given to all PFs.
|
|
* This tag takes precedence over TLV_TAG_PRIVILEGE_MASK_REM. */
|
|
|
|
#define TLV_TAG_PRIVILEGE_MASK_ADD_ALL_PFS (0x10190000)
|
|
|
|
struct tlv_privilege_mask_add_all_pfs {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t privilege_mask_add;
|
|
};
|
|
|
|
/* Additional privileges given to a selected PF.
|
|
* This tag takes precedence over TLV_TAG_PRIVILEGE_MASK_REM. */
|
|
|
|
#define TLV_TAG_PRIVILEGE_MASK_ADD_SINGLE_PF(pf) (0x101A0000 + (pf))
|
|
|
|
struct tlv_privilege_mask_add_single_pf {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t privilege_mask_add;
|
|
};
|
|
|
|
/* Turning on/off the PFIOV mode.
|
|
* This tag only takes effect if TLV_TAG_VSWITCH_TYPE is missing or set to DEFAULT. */
|
|
|
|
#define TLV_TAG_PFIOV(port) (0x10170000 + (port))
|
|
|
|
struct tlv_pfiov {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t pfiov;
|
|
#define TLV_PFIOV_OFF (0) /* Default */
|
|
#define TLV_PFIOV_ON (1)
|
|
};
|
|
|
|
/* Multicast filter chaining mode selection.
|
|
*
|
|
* When enabled, multicast packets are delivered to all recipients of all
|
|
* matching multicast filters, with the exception that IP multicast filters
|
|
* will steal traffic from MAC multicast filters on a per-function basis.
|
|
* (New behaviour.)
|
|
*
|
|
* When disabled, multicast packets will always be delivered only to the
|
|
* recipients of the highest priority matching multicast filter.
|
|
* (Legacy behaviour.)
|
|
*
|
|
* The DEFAULT mode (which is the same as the tag not being present at all)
|
|
* is equivalent to ENABLED in production builds, and DISABLED in eftest
|
|
* builds.
|
|
*
|
|
* This option is intended to provide run-time control over this feature
|
|
* while it is being stabilised and may be withdrawn at some point in the
|
|
* future; the new behaviour is intended to become the standard behaviour.
|
|
*/
|
|
|
|
#define TLV_TAG_MCAST_FILTER_CHAINING (0x10180000)
|
|
|
|
struct tlv_mcast_filter_chaining {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t mode;
|
|
#define TLV_MCAST_FILTER_CHAINING_DEFAULT (0xffffffff)
|
|
#define TLV_MCAST_FILTER_CHAINING_DISABLED (0)
|
|
#define TLV_MCAST_FILTER_CHAINING_ENABLED (1)
|
|
};
|
|
|
|
|
|
/* Pacer rate limit per PF */
|
|
#define TLV_TAG_RATE_LIMIT(pf) (0x101b0000 + (pf))
|
|
|
|
struct tlv_rate_limit {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t rate_mbps;
|
|
};
|
|
|
|
|
|
/* OCSD Enable/Disable
|
|
*
|
|
* This setting allows OCSD to be disabled. This is a requirement for HP
|
|
* servers to support PCI passthrough for virtualization.
|
|
*
|
|
* The DEFAULT mode (which is the same as the tag not being present) is
|
|
* equivalent to ENABLED.
|
|
*
|
|
* This option is not used by the MCFW, and is entirely handled by the various
|
|
* drivers that support OCSD, by reading the setting before they attempt
|
|
* to enable OCSD.
|
|
*
|
|
* bit0: OCSD Disabled/Enabled
|
|
*/
|
|
|
|
#define TLV_TAG_OCSD (0x101C0000)
|
|
|
|
struct tlv_ocsd {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t mode;
|
|
#define TLV_OCSD_DISABLED 0
|
|
#define TLV_OCSD_ENABLED 1 /* Default */
|
|
};
|
|
|
|
/* Descriptor cache config.
|
|
*
|
|
* Sets the sizes of the TX and RX descriptor caches as a power of 2. It also
|
|
* sets the total number of VIs. When the number of VIs is reduced VIs are taken
|
|
* away from the highest numbered port first, so a vi_count of 1024 means 1024
|
|
* VIs on the first port and 0 on the second (on a Torino).
|
|
*/
|
|
|
|
#define TLV_TAG_DESCRIPTOR_CACHE_CONFIG (0x101d0000)
|
|
|
|
struct tlv_descriptor_cache_config {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t rx_desc_cache_size;
|
|
uint8_t tx_desc_cache_size;
|
|
uint16_t vi_count;
|
|
};
|
|
#define TLV_DESC_CACHE_DEFAULT (0xff)
|
|
#define TLV_VI_COUNT_DEFAULT (0xffff)
|
|
|
|
/* RX event merging config (read batching).
|
|
*
|
|
* Sets the global maximum number of events for the merging bins, and the
|
|
* global timeout configuration for the bins.
|
|
*/
|
|
|
|
#define TLV_TAG_RX_EVENT_MERGING_CONFIG (0x101e0000)
|
|
|
|
struct tlv_rx_event_merging_config {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint32_t max_events;
|
|
#define TLV_RX_EVENT_MERGING_CONFIG_MAX_EVENTS_MAX ((1 << 4) - 1)
|
|
uint32_t timeout_ns;
|
|
};
|
|
#define TLV_RX_EVENT_MERGING_MAX_EVENTS_DEFAULT 7
|
|
#define TLV_RX_EVENT_MERGING_TIMEOUT_NS_DEFAULT 8740
|
|
|
|
#define TLV_TAG_PCIE_LINK_SETTINGS (0x101f0000)
|
|
struct tlv_pcie_link_settings {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint16_t gen; /* Target PCIe generation: 1, 2, 3 */
|
|
uint16_t width; /* Number of lanes */
|
|
};
|
|
|
|
#define TLV_TAG_LICENSE (0x20800000)
|
|
|
|
typedef struct tlv_license {
|
|
uint32_t tag;
|
|
uint32_t length;
|
|
uint8_t data[];
|
|
} tlv_license_t;
|
|
|
|
#endif /* CI_MGMT_TLV_LAYOUT_H */
|