7b778b5e61
This introduce an xxxFS_BOOT for each of the rootable filesystems. (Presently not required, but encouraged to allow a smooth move of option *FS to opt_dontuse.h later.) LFS is temporarily disabled, and will be re-enabled tomorrow.
1180 lines
31 KiB
C
1180 lines
31 KiB
C
|
|
/*
|
|
* GPIB driver for FreeBSD.
|
|
* Version 0.1 (No interrupts, no DMA)
|
|
* Supports National Instruments AT-GPIB and AT-GPIB/TNT boards.
|
|
* (AT-GPIB not tested, but it should work)
|
|
*
|
|
* Written by Fred Cawthorne (fcawth@delphi.umd.edu)
|
|
* Some sections were based partly on the lpt driver.
|
|
* (some remnants may remain)
|
|
*
|
|
* This software is distributed with NO WARRANTIES, not even the implied
|
|
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* The author grants any other persons or organizations permission to use
|
|
* or modify this software as long as this message is kept with the software,
|
|
* all derivative works or modified versions.
|
|
*
|
|
*
|
|
*/
|
|
/*Please read the README file for usage information*/
|
|
|
|
#include "gp.h"
|
|
|
|
#if NGP > 0
|
|
|
|
#include "opt_devfs.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#ifdef DEVFS
|
|
#include <sys/devfsext.h>
|
|
#endif /*DEVFS*/
|
|
|
|
#include <i386/isa/gpibreg.h>
|
|
#include <i386/isa/gpib.h>
|
|
#include <i386/isa/isa_device.h>
|
|
|
|
#define MIN(a,b) ((a < b) ? a : b)
|
|
|
|
#define GPIBPRI (PZERO+8)|PCATCH
|
|
#define SLEEP_MAX 1000
|
|
#define SLEEP_MIN 4
|
|
|
|
|
|
|
|
static int initgpib(void);
|
|
static void closegpib(void);
|
|
static int sendgpibfifo(unsigned char device,char *data,int count);
|
|
static int sendrawgpibfifo(unsigned char device,char *data,int count);
|
|
static int readgpibfifo(unsigned char device,char *data,int count);
|
|
#if 0
|
|
static void showregs(void);
|
|
#endif
|
|
static void enableremote(unsigned char device);
|
|
static void gotolocal(unsigned char device);
|
|
static void menableremote(unsigned char *device);
|
|
static void mgotolocal(unsigned char *device);
|
|
static void mtrigger(unsigned char *device);
|
|
static void trigger(unsigned char device);
|
|
static char spoll(unsigned char device);
|
|
|
|
static int gpprobe(struct isa_device *dvp);
|
|
static int gpattach(struct isa_device *dvp);
|
|
|
|
struct isa_driver gpdriver = {gpprobe, gpattach, "gp"};
|
|
|
|
static d_open_t gpopen;
|
|
static d_close_t gpclose;
|
|
static d_write_t gpwrite;
|
|
static d_ioctl_t gpioctl;
|
|
|
|
#define CDEV_MAJOR 44
|
|
static struct cdevsw gp_cdevsw =
|
|
{ gpopen, gpclose, noread, gpwrite, /*44*/
|
|
gpioctl, nostop, nullreset, nodevtotty,/* GPIB */
|
|
seltrue, nommap, NULL, "gp", NULL, -1 };
|
|
|
|
#define BUFSIZE 1024
|
|
#define ATTACHED 0x08
|
|
#define OPEN 0x04
|
|
#define INIT 0x02
|
|
|
|
|
|
static struct gpib_softc {
|
|
char *sc_cp; /* current data to send */
|
|
int sc_count; /* bytes queued in sc_inbuf */
|
|
int sc_type; /* Type of gpib controller */
|
|
u_char sc_flags; /* flags (open and internal) */
|
|
char sc_unit; /* gpib device number */
|
|
char *sc_inbuf; /* buffer for data */
|
|
#ifdef DEVFS
|
|
void *devfs_token; /* handle for devfs entry */
|
|
#endif
|
|
} gpib_sc; /* only support one of these? */
|
|
static int oldcount;
|
|
static char oldbytes[2];
|
|
/*Probe routine*/
|
|
/*This needs to be changed to be a bit more robust*/
|
|
static int
|
|
gpprobe(struct isa_device *dvp)
|
|
{
|
|
int status;
|
|
struct gpib_softc *sc = &gpib_sc;
|
|
|
|
|
|
gpib_port = dvp->id_iobase;
|
|
status=1;
|
|
sc->sc_type=3;
|
|
if ((inb(KSR)&0xF7)==0x34) sc->sc_type=3;
|
|
else if ((inb(KSR)&0xF7)==0x24) sc->sc_type=2;
|
|
else if ((inb(KSR)&0xF7)==0x14) sc->sc_type=1;
|
|
else status=0;
|
|
|
|
return (status);
|
|
}
|
|
|
|
/*
|
|
* gpattach()
|
|
* Attach device and print the type of card to the screen.
|
|
*/
|
|
static int
|
|
gpattach(isdp)
|
|
struct isa_device *isdp;
|
|
{
|
|
struct gpib_softc *sc = &gpib_sc;
|
|
|
|
sc->sc_unit = isdp->id_unit;
|
|
if (sc->sc_type==3)
|
|
printf ("gp%d: type AT-GPIB/TNT\n",sc->sc_unit);
|
|
if (sc->sc_type==2)
|
|
printf ("gp%d: type AT-GPIB chip NAT4882B\n",sc->sc_unit);
|
|
if (sc->sc_type==1)
|
|
printf ("gp%d: type AT-GPIB chip NAT4882A\n",sc->sc_unit);
|
|
sc->sc_flags |=ATTACHED;
|
|
|
|
#ifdef DEVFS
|
|
sc->devfs_token =
|
|
devfs_add_devswf(&gp_cdevsw, 0, DV_CHR, 0, 0, 0600, "gp");
|
|
#endif
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* gpopen()
|
|
* New open on device.
|
|
*
|
|
* More than 1 open is not allowed on the entire device.
|
|
* i.e. even if gpib5 is open, we can't open another minor device
|
|
*/
|
|
static int
|
|
gpopen(dev, flags, fmt, p)
|
|
dev_t dev;
|
|
int flags;
|
|
int fmt;
|
|
struct proc *p;
|
|
{
|
|
struct gpib_softc *sc = &gpib_sc;
|
|
u_char unit;
|
|
int status;
|
|
|
|
unit= minor(dev);
|
|
|
|
/* minor number out of limits ? */
|
|
if (unit >= 32)
|
|
return (ENXIO);
|
|
|
|
/* Attached ? */
|
|
if (!(sc->sc_flags&ATTACHED)) { /* not attached */
|
|
return(ENXIO);
|
|
}
|
|
|
|
/* Already open */
|
|
if (sc->sc_flags&OPEN) { /* too late .. */
|
|
return(EBUSY);
|
|
}
|
|
|
|
/* Have memory for buffer? */
|
|
sc->sc_inbuf = malloc(BUFSIZE, M_DEVBUF, M_WAITOK);
|
|
if (sc->sc_inbuf == 0)
|
|
return(ENOMEM);
|
|
|
|
if (initgpib()) return(EBUSY);
|
|
sc->sc_flags |= OPEN;
|
|
sc->sc_count = 0;
|
|
oldcount=0;
|
|
if (unit!=0) { /*Someone is trying to access an actual device*/
|
|
/*So.. we'll address it to listen*/
|
|
enableremote(unit);
|
|
do {
|
|
status=inb(ISR2);
|
|
}
|
|
while (!(status&8)&&tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1)==EWOULDBLOCK);
|
|
|
|
outb(CDOR,(unit&31)+32);/*address device to listen*/
|
|
|
|
do
|
|
status=inb(ISR2);
|
|
while (!(status&8)&&tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1)==EWOULDBLOCK);
|
|
outb (CDOR,64); /*Address controller (me) to talk*/
|
|
do status=inb(ISR2);
|
|
|
|
while (!(status&8)&&tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1)==EWOULDBLOCK);
|
|
outb(AUXMR,gts); /*Set to Standby (Controller)*/
|
|
|
|
|
|
do
|
|
status=inb(ISR1);
|
|
while (!(status&2)&&tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1)==EWOULDBLOCK);
|
|
/*Set up the TURBO488 registers*/
|
|
outb(IMR2,0x30); /*we have to enable DMA (0x30) for turbo488 to work*/
|
|
outb(CNT0,0); /*NOTE this does not enable DMA to the host computer!!*/
|
|
outb(CNT1,0);
|
|
outb(CNT2,0);
|
|
outb(CNT3,0);
|
|
outb(CMDR,0x20);
|
|
outb(CFG,0x47); /* 16 bit, write, fifo B first, TMOE TIM */
|
|
outb(CMDR,0x10); /*RESET fifos*/
|
|
outb(CMDR,0x04); /*Tell TURBO488 to GO*/
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* gpclose()
|
|
* Close gpib device.
|
|
*/
|
|
static int
|
|
gpclose(dev, flags, fmt, p)
|
|
dev_t dev;
|
|
int flags;
|
|
int fmt;
|
|
struct proc *p;
|
|
{
|
|
struct gpib_softc *sc = &gpib_sc;
|
|
unsigned char unit;
|
|
unsigned char status;
|
|
|
|
unit=minor(dev);
|
|
if (unit!=0) { /*Here we need to send the last character with EOS*/
|
|
/*and unaddress the listening device*/
|
|
|
|
|
|
status=EWOULDBLOCK;
|
|
|
|
/*Wait for fifo to become empty*/
|
|
do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while ((inb(ISR3)&0x04)&&status==EWOULDBLOCK); /*Fifo is not empty*/
|
|
|
|
outb(CMDR,0x08); /*Issue STOP to TURBO488*/
|
|
|
|
/*Wait for DONE and STOP*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR3)&0x11)&&status==EWOULDBLOCK); /*not done and stop*/
|
|
|
|
/*Shut down TURBO488 */
|
|
outb(IMR2,0x00); /*DISABLE DMA to turbo488*/
|
|
outb(CMDR,0x20); /*soft reset turbo488*/
|
|
outb(CMDR,0x10); /*reset fifos*/
|
|
|
|
|
|
/*Send last byte with EOI set*/
|
|
/*Send second to last byte if there are 2 bytes left*/
|
|
if (status==EWOULDBLOCK) {
|
|
|
|
do
|
|
if (!(inb(ISR1)&2)) status=tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&2)&&(status==EWOULDBLOCK));
|
|
if (oldcount==2){
|
|
outb(CDOR,oldbytes[0]); /*Send second to last byte*/
|
|
while (!(inb(ISR1)&2)&&(status==EWOULDBLOCK));
|
|
status=tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1);
|
|
}
|
|
|
|
outb(AUXMR,seoi); /*Set EOI for the last byte*/
|
|
outb(AUXMR,0x5E); /*Clear SYNC*/
|
|
if (oldcount==1)
|
|
outb(CDOR,oldbytes[0]);
|
|
else
|
|
if (oldcount==2)
|
|
outb(CDOR,oldbytes[1]);
|
|
else {
|
|
outb (CDOR,13); /*Send a CR.. we've got trouble*/
|
|
printf("gpib: Warning: gpclose called with nothing left in buffer\n");
|
|
}
|
|
}
|
|
|
|
do
|
|
if (!(inb(ISR1)&2)) status=tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&2)&&(status==EWOULDBLOCK));
|
|
|
|
|
|
if (!(inb(ISR1)&2)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&2)&&status==EWOULDBLOCK);
|
|
|
|
|
|
outb(AUXMR,tca); /* Regain full control of the bus*/
|
|
|
|
|
|
do
|
|
status=inb(ISR2);
|
|
while (!(status&8)&&tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1)==EWOULDBLOCK);
|
|
outb(CDOR,63); /*unlisten*/
|
|
do
|
|
status=inb(ISR2);
|
|
while (!(status&8)&&tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1)==EWOULDBLOCK);
|
|
outb(AUXMR,0x5E); /*Clear SYNC*/
|
|
outb (CDOR,95);/*untalk*/
|
|
do
|
|
status=inb(ISR2);
|
|
while (!(status&8)&&tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1)==EWOULDBLOCK);
|
|
/*gotolocal(minor(dev));*/
|
|
}
|
|
closegpib();
|
|
sc->sc_flags = ATTACHED;
|
|
free(sc->sc_inbuf, M_DEVBUF);
|
|
sc->sc_inbuf = 0; /* Sanity */
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* gpwrite()
|
|
* Copy from user's buffer, then write to GPIB device referenced
|
|
* by minor(dev).
|
|
*/
|
|
static int
|
|
gpwrite(dev, uio, ioflag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int ioflag;
|
|
{
|
|
int err,count;
|
|
|
|
/* main loop */
|
|
while ((gpib_sc.sc_count = MIN(BUFSIZE-1, uio->uio_resid)) > 0) {
|
|
/* If there were >1 bytes left over, send them */
|
|
if (oldcount==2)
|
|
sendrawgpibfifo(minor(dev),oldbytes,2);
|
|
|
|
/*If there was 1 character left, put it at the beginning
|
|
of the new buffer*/
|
|
if (oldcount==1){
|
|
(gpib_sc.sc_inbuf)[0]=oldbytes[0];
|
|
gpib_sc.sc_cp = gpib_sc.sc_inbuf;
|
|
/* get from user-space */
|
|
uiomove(gpib_sc.sc_inbuf+1, gpib_sc.sc_count, uio);
|
|
gpib_sc.sc_count++;
|
|
}
|
|
else {
|
|
gpib_sc.sc_cp = gpib_sc.sc_inbuf;
|
|
/* get from user-space */
|
|
uiomove(gpib_sc.sc_inbuf, gpib_sc.sc_count, uio);
|
|
}
|
|
|
|
/*NOTE we always leave one byte in case this is the last write
|
|
so close can send EOI with the last byte There may be 2 bytes
|
|
since we are doing 16 bit transfers.(note the -1 in the count below)*/
|
|
/*If count<=2 we'll either pick it up on the next write or on close*/
|
|
if (gpib_sc.sc_count>2) {
|
|
count = sendrawgpibfifo(minor(dev),gpib_sc.sc_cp,gpib_sc.sc_count-1);
|
|
err=!count;
|
|
if (err)
|
|
return(1);
|
|
oldcount=gpib_sc.sc_count-count; /*Set # of remaining bytes*/
|
|
gpib_sc.sc_count-=count;
|
|
gpib_sc.sc_cp+=count; /*point char pointer to remaining bytes*/
|
|
}
|
|
else oldcount=gpib_sc.sc_count;
|
|
oldbytes[0]=gpib_sc.sc_cp[0];
|
|
if (oldcount==2)
|
|
oldbytes[1]=gpib_sc.sc_cp[1];
|
|
}
|
|
return(0);
|
|
}
|
|
/* Here is how you would usually access a GPIB device
|
|
An exception would be a plotter or printer that you can just
|
|
write to using a minor device = its GPIB address */
|
|
|
|
static int
|
|
gpioctl(dev_t dev, int cmd, caddr_t data, int flags, struct proc *p)
|
|
{
|
|
struct gpibdata *gd = (struct gpibdata *)data;
|
|
int error,result;
|
|
error = 0;
|
|
|
|
switch (cmd) {
|
|
case GPIBWRITE:
|
|
sendgpibfifo(gd->address,gd->data,*(gd->count));
|
|
error=0;
|
|
break;
|
|
case GPIBREAD:
|
|
result=readgpibfifo(gd->address,gd->data,*(gd->count));
|
|
*(gd->count)=result;
|
|
error=0;
|
|
break;
|
|
case GPIBINIT:
|
|
initgpib();
|
|
error=0;
|
|
break;
|
|
case GPIBTRIGGER:
|
|
trigger(gd->address);
|
|
error=0;
|
|
break;
|
|
case GPIBREMOTE:
|
|
enableremote(gd->address);
|
|
error=0;
|
|
break;
|
|
case GPIBLOCAL:
|
|
gotolocal(gd->address);
|
|
error=0;
|
|
break;
|
|
|
|
case GPIBMTRIGGER:
|
|
mtrigger(gd->data);
|
|
error=0;
|
|
break;
|
|
case GPIBMREMOTE:
|
|
menableremote(gd->data);
|
|
error=0;
|
|
break;
|
|
case GPIBMLOCAL:
|
|
mgotolocal(gd->data);
|
|
error=0;
|
|
break;
|
|
case GPIBSPOLL:
|
|
*(gd->data)=spoll(gd->address);
|
|
error=0;
|
|
break;
|
|
default:
|
|
error = ENODEV;
|
|
}
|
|
|
|
return(error);
|
|
}
|
|
|
|
|
|
|
|
|
|
#if 0
|
|
/*Just in case you want a dump of the registers...*/
|
|
|
|
static void showregs() {
|
|
printf ("NAT4882:\n");
|
|
printf ("ISR1=%X\t",inb(ISR1));
|
|
printf ("ISR2=%X\t",inb(ISR2));
|
|
printf ("SPSR=%X\t",inb(SPSR));
|
|
printf ("KSR =%X\t",inb(KSR));
|
|
printf ("ADSR=%X\t",inb(ADSR));
|
|
printf ("CPTR=%X\t",inb(CPTR));
|
|
printf ("SASR=%X\t",inb(SASR));
|
|
printf ("ADR0=%X\t",inb(ADR0));
|
|
printf ("ISR0=%X\t",inb(ISR0));
|
|
printf ("ADR1=%X\t",inb(ADR1));
|
|
printf ("BSR =%X\n",inb(BSR));
|
|
|
|
printf ("Turbo488\n");
|
|
printf ("STS1=%X ",inb(STS1));
|
|
printf ("STS2=%X ",inb(STS2));
|
|
printf ("ISR3=%X ",inb(ISR3));
|
|
printf ("CNT0=%X ",inb(CNT0));
|
|
printf ("CNT1=%X ",inb(CNT1));
|
|
printf ("CNT2=%X ",inb(CNT2));
|
|
printf ("CNT3=%X ",inb(CNT3));
|
|
printf ("IMR3=%X ",inb(IMR3));
|
|
printf ("TIMER=%X\n",inb(TIMER));
|
|
|
|
|
|
}
|
|
#endif
|
|
/*Set up the NAT4882 and TURBO488 registers */
|
|
/*This will be nonsense to you unless you have a data sheet from
|
|
National Instruments. They should give you one if you call them*/
|
|
|
|
static int
|
|
initgpib() {
|
|
outb(CMDR,0x20);
|
|
outb(CFG,0x16);
|
|
outb(IMR3,0);
|
|
outb(CMDR,0x10);
|
|
outb(CNT0,0);
|
|
outb(CNT1,0);
|
|
outb(CNT2,0);
|
|
outb(CNT3,0);
|
|
outb(INTR,0); /* Put interrupt line in tri-state mode??*/
|
|
outb(AUXMR,chip_reset);
|
|
|
|
outb(IMR1,0x10); /* send interrupt to TURBO488 when END received*/
|
|
outb(IMR2,0);
|
|
outb(IMR0,0x90); /* Do we want nba here too??? */
|
|
outb(ADMR,1);
|
|
outb(ADR,0);
|
|
outb(ADR,128);
|
|
outb(AUXMR,0xE9);
|
|
outb(AUXMR,0x49);
|
|
outb(AUXMR,0x70);
|
|
outb(AUXMR,0xD0);
|
|
outb(AUXMR,0xA0);
|
|
|
|
outb(EOSR,10); /*set EOS message to newline*/
|
|
/*should I make the default to interpret END as EOS?*/
|
|
/*It isn't now. The following changes this*/
|
|
outb(AUXMR,0x80); /*No special EOS handling*/
|
|
/*outb(AUXMR,0x88) */ /* Transmit END with EOS*/
|
|
/*outb(AUXMR,0x84) */ /* Set END on EOS received*/
|
|
/*outb(AUXMR,0x8C) */ /* Do both of the above*/
|
|
|
|
|
|
/* outb(AUXMR,hldi); */ /*Perform RFD Holdoff for all data in*/
|
|
/*Not currently supported*/
|
|
|
|
outb(AUXMR,pon);
|
|
outb(AUXMR,sic_rsc);
|
|
tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
|
|
outb(AUXMR,sic_rsc_off);
|
|
|
|
return(0);
|
|
|
|
|
|
}
|
|
|
|
/*This is kind of Brute force.. But it works*/
|
|
|
|
static void
|
|
closegpib()
|
|
{
|
|
outb(AUXMR,chip_reset);
|
|
}
|
|
|
|
/*GPIB ROUTINES:
|
|
These will also make little sense unless you have a data sheet.
|
|
Note that the routines with an "m" in the beginning are for
|
|
accessing multiple devices in one call*/
|
|
|
|
|
|
/*This is one thing I could not figure out how to do correctly.
|
|
I tried to use the auxilary command to enable remote, but it
|
|
never worked. Here, I bypass everything and write to the BSR
|
|
to enable the remote line. NOTE that these lines are effectively
|
|
"OR'ed" with the actual lines, so writing a 1 to the bit in the BSR
|
|
forces the GPIB line true, no matter what the fancy circuitry of the
|
|
NAT4882 wants to do with it*/
|
|
|
|
static void
|
|
enableremote(unsigned char device)
|
|
{
|
|
int status;
|
|
|
|
status=EWOULDBLOCK;
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb(BSR,1); /*Set REN bit on GPIB*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb(CDOR,(device&31)+32); /*address device to listen*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb (CDOR,63); /*Unaddress device*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
}
|
|
/*This does not release the REM line on the gpib port, because if it did,
|
|
all the remote devices would go to local mode. This only sends the
|
|
gotolocal message to one device. Currently, REM is always held true
|
|
after enableremote is called, and is reset only on a close of the
|
|
gpib device */
|
|
|
|
static void
|
|
gotolocal(unsigned char device)
|
|
{ int status;
|
|
status=EWOULDBLOCK;
|
|
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb(CDOR,(device&31)+32);
|
|
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb(AUXMR,0x5E); /*Clear SYNC*/
|
|
outb (CDOR,1);
|
|
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb(AUXMR,0x5E);
|
|
outb (CDOR,63);/*unaddress device*/
|
|
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
}
|
|
|
|
|
|
static void
|
|
menableremote(unsigned char *device)
|
|
{
|
|
int status, counter = 0;
|
|
|
|
status=EWOULDBLOCK;
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb(BSR,1); /*Set REN bit on GPIB*/
|
|
do
|
|
{
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb(CDOR,(device[counter]&31)+32); /*address device to listen*/
|
|
counter++;
|
|
}
|
|
while (device[counter]<32);
|
|
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb (CDOR,63); /*Unaddress device*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
}
|
|
|
|
static void
|
|
mgotolocal(unsigned char *device)
|
|
{ int status;
|
|
int counter=0;
|
|
status=EWOULDBLOCK;
|
|
if (device[counter]<32) do {
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb(CDOR,(device[counter]&31)+32);
|
|
counter++;
|
|
} while (device[counter]<32);
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb(AUXMR,0x5E); /*Clear SYNC*/
|
|
outb (CDOR,1);
|
|
|
|
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb(AUXMR,0x5E);
|
|
outb (CDOR,63);/*unaddress device*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",2);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
|
|
}
|
|
/*Trigger a device. What happens depends on how the device is
|
|
configured. */
|
|
|
|
static void
|
|
trigger(unsigned char device)
|
|
{ int status;
|
|
|
|
status=EWOULDBLOCK;
|
|
if (device<32) {
|
|
if (!(inb(ISR2)&0x08)) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb(CDOR,(device&31)+32); /*address device to listen*/
|
|
if (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
outb (CDOR,8); /*send GET*/
|
|
|
|
if (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb (AUXMR,0x5E);
|
|
outb (CDOR,63);/*unaddress device*/
|
|
if (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
|
|
}
|
|
}
|
|
|
|
/*Trigger multiple devices by addressing them all to listen, and then
|
|
sending GET*/
|
|
|
|
static void
|
|
mtrigger(unsigned char *device)
|
|
{ int status=EWOULDBLOCK;
|
|
int counter=0;
|
|
if(device[0]<32){
|
|
do {
|
|
if (device[counter]<32)
|
|
if (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb(CDOR,(device[counter]&31)+32); /*address device to listen*/
|
|
counter++;
|
|
}
|
|
while (device[counter]<32);
|
|
if (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb (CDOR,8); /*send GET*/
|
|
|
|
if (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
outb (AUXMR,0x5E);
|
|
outb (CDOR,63);/*unaddress device*/
|
|
if (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR2)&0x08)&&status==EWOULDBLOCK); /*Wait to send next cmd*/
|
|
|
|
|
|
}
|
|
}
|
|
|
|
/*This is not used now, but it should work with NI's 8 bit gpib board
|
|
since it does not use the TURBO488 registers at all */
|
|
|
|
|
|
/*Send data through the TURBO488 FIFOS to a device that is already
|
|
addressed to listen. This is used by the write call when someone is
|
|
writing to a printer or plotter, etc... */
|
|
/*The last byte of each write is held off until either the next
|
|
write or close, so it can be sent with EOI set*/
|
|
|
|
static int
|
|
sendrawgpibfifo(unsigned char device,char *data,int count)
|
|
{
|
|
int status;
|
|
int counter;
|
|
int fifopos;
|
|
int sleeptime;
|
|
|
|
|
|
sleeptime=SLEEP_MIN;
|
|
counter=0;
|
|
|
|
|
|
fifopos=0;
|
|
|
|
status=EWOULDBLOCK;
|
|
do {
|
|
/*Wait for fifo to become not full if it is full */
|
|
sleeptime=SLEEP_MIN;
|
|
if (!(inb(ISR3)&0x08)) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",sleeptime);
|
|
if (sleeptime<SLEEP_MAX) sleeptime=sleeptime*2;
|
|
}
|
|
while (!(inb(ISR3)&0x08)&&(status==EWOULDBLOCK)); /*Fifo is full*/
|
|
|
|
if((count>1)&&(inb(ISR3)&0x08)){
|
|
outw(FIFOB,*(unsigned*)(data+counter));
|
|
/* printf ("gpib: sent:%c,%c\n",data[counter],data[counter+1]);*/
|
|
|
|
counter+=2;
|
|
count-=2;
|
|
}
|
|
}
|
|
while ((count>1)&&(status==EWOULDBLOCK));
|
|
/*The write routine and close routine must check if there is 1
|
|
byte left and handle it accordingly*/
|
|
|
|
|
|
/*Return the number of bytes written to the device*/
|
|
return(counter);
|
|
|
|
|
|
|
|
}
|
|
|
|
static int
|
|
sendgpibfifo(unsigned char device,char *data,int count)
|
|
{
|
|
int status;
|
|
int counter;
|
|
int fifopos;
|
|
int sleeptime;
|
|
|
|
outb(IMR2,0x30); /*we have to enable DMA (0x30) for turbo488 to work*/
|
|
outb(CNT0,0);
|
|
outb(CNT1,0);
|
|
outb(CNT2,0);
|
|
outb(CNT3,0);
|
|
status=EWOULDBLOCK;
|
|
if (!(inb(ISR2)&8)) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(CDOR,(device&31)+32);/*address device to listen*/
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
outb (CDOR,64); /*Address controller (me) to talk*/
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(AUXMR,gts); /*Set to Standby (Controller)*/
|
|
fifopos=0;
|
|
|
|
sleeptime=SLEEP_MIN;
|
|
counter=0;
|
|
|
|
|
|
fifopos=0;
|
|
|
|
outb(CMDR,0x20);
|
|
outb(CFG,0x47); /* 16 bit, write, fifo B first, TMOE TIM */
|
|
outb(CMDR,0x10); /*RESET fifos*/
|
|
outb(CCRG,seoi); /*program to send EOI at end*/
|
|
outb(CMDR,0x04); /*Tell TURBO488 to GO*/
|
|
status=EWOULDBLOCK;
|
|
do {
|
|
/*Wait for fifo to become not full if it is full */
|
|
sleeptime=SLEEP_MIN;
|
|
if (!(inb(ISR3)&0x08)) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",sleeptime);
|
|
if (sleeptime<SLEEP_MAX) sleeptime=sleeptime*2;
|
|
}
|
|
while (!(inb(ISR3)&0x08)&&(status==EWOULDBLOCK)); /*Fifo is full*/
|
|
|
|
if((count>1)&&(inb(ISR3)&0x08)){
|
|
/*if(count==2) outb(CFG,15+0x40); *//*send eoi when done*/
|
|
outw(FIFOB,*(unsigned*)(data+counter));
|
|
|
|
counter+=2;
|
|
count-=2;
|
|
}
|
|
}
|
|
while ((count>2)&&(status==EWOULDBLOCK));
|
|
|
|
if (count==2&&status==EWOULDBLOCK) {
|
|
/*Wait for fifo to become not full*/
|
|
if(status==EWOULDBLOCK&&!(inb(ISR3)&0x08)) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",SLEEP_MIN);
|
|
}
|
|
while (!(inb(ISR3)&0x08)&&status==EWOULDBLOCK); /*Fifo is full*/
|
|
/*outb(CFG,0x40+15);*//*send eoi when done*/
|
|
outb(FIFOB,data[counter]);
|
|
counter++;
|
|
count--;
|
|
}
|
|
|
|
|
|
/*outb(CMDR,0x04);*/
|
|
|
|
/*Wait for fifo to become empty*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while ((inb(ISR3)&0x04)&&status==EWOULDBLOCK); /*Fifo is not empty*/
|
|
|
|
outb(CMDR,0x08); /*Issue STOP to TURBO488*/
|
|
|
|
/*Wait for DONE and STOP*/
|
|
if (status==EWOULDBLOCK) do {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while (!(inb(ISR3)&0x11)&&status==EWOULDBLOCK); /*not done and stop*/
|
|
|
|
outb(IMR2,0x00); /*we have to enable DMA (0x30) for turbo488 to work*/
|
|
outb(CMDR,0x20); /*soft reset turbo488*/
|
|
outb(CMDR,0x10); /*reset fifos*/
|
|
|
|
|
|
/*Send last byte with EOI set*/
|
|
/*Here EOI is handled correctly since the string to be sent */
|
|
/*is actually all sent during the ioctl. (See above)*/
|
|
|
|
if (count==1&&status==EWOULDBLOCK) { /*Count should always=1 here*/
|
|
|
|
do
|
|
if (!(inb(ISR1)&2)) status=tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&2)&&(status==EWOULDBLOCK));
|
|
|
|
outb(AUXMR,seoi); /*Set EOI for the last byte*/
|
|
outb(AUXMR,0x5E); /*Clear SYNC*/
|
|
outb(CDOR,data[counter]);
|
|
counter++;
|
|
count--;
|
|
}
|
|
|
|
do
|
|
if (!(inb(ISR1)&2)) status=tsleep((caddr_t)&gpib_sc, GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&2)&&(status==EWOULDBLOCK));
|
|
|
|
|
|
if (!(inb(ISR1)&2)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&2)&&status==EWOULDBLOCK);
|
|
outb(AUXMR,tca); /* Regain full control of the bus*/
|
|
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(CDOR,63); /*unlisten*/
|
|
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
|
|
outb(AUXMR,0x5E); /*Clear SYNC*/
|
|
outb (CDOR,95);/*untalk*/
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
|
|
return(counter);
|
|
|
|
|
|
|
|
}
|
|
|
|
static int
|
|
readgpibfifo(unsigned char device,char *data,int count)
|
|
{
|
|
int status;
|
|
int status2 = 0;
|
|
int status1;
|
|
int counter;
|
|
int fifopos;
|
|
unsigned inword;
|
|
|
|
outb(IMR2,0x30); /*we have to enable DMA (0x30) for turbo488 to work*/
|
|
/*outb(IMR3,0x1F);
|
|
outb(INTR,1); */
|
|
outb(CMDR,0x20);
|
|
|
|
outb(CFG,14+0x60+1); /* Halt on int,read, fifo B first, CCEN TMOE TIM */
|
|
outb(CMDR,0x10); /*RESET fifos*/
|
|
outb(CCRG,tcs); /*program to tcs at end*/
|
|
outb(CMDR,0x08);/*STOP??*/
|
|
|
|
|
|
|
|
status=EWOULDBLOCK;
|
|
do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb (CDOR,32); /*Address controller (me) to listen*/
|
|
|
|
do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(CDOR,(device&31)+64);/*address device to talk*/
|
|
|
|
|
|
do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(AUXMR,gts); /*Set to Standby (Controller)*/
|
|
|
|
counter=0;
|
|
fifopos=0;
|
|
|
|
outb(CMDR,0x04); /*Tell TURBO488 to GO*/
|
|
|
|
|
|
do {
|
|
status1=inb(ISR3);
|
|
if (!(status1&0x01)&&(status1&0x04)){
|
|
status2=inb(STS2);
|
|
inword=inw(FIFOB);
|
|
*(unsigned*)(data+counter)=inword;
|
|
/* printf ("Read:%c,%c\n",data[counter],data[counter+1]);*/
|
|
counter+=2;
|
|
}
|
|
else {
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",4);
|
|
}
|
|
}
|
|
while (!(status1&0x01)&&status==EWOULDBLOCK);
|
|
if(!(status2 & 0x04)){ /*Only 1 byte came in on last 16 bit transfer*/
|
|
data[counter-1]=0;
|
|
counter--; }
|
|
else
|
|
data[counter]=0;
|
|
outb(CMDR,0x08); /*send STOP*/
|
|
|
|
do{
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
}
|
|
while(!(inb(ISR3)&0x11)&&status==EWOULDBLOCK); /*wait for DONE and STOP*/
|
|
outb(AUXMR,0x55);
|
|
|
|
outb(IMR2,0x00); /*we have to enable DMA (0x30) for turbo488 to work*/
|
|
outb(CMDR,0x20); /*soft reset turbo488*/
|
|
outb(CMDR,0x10); /*reset fifos*/
|
|
|
|
/* do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&2));*/
|
|
outb(AUXMR,tca); /* Regain full control of the bus*/
|
|
|
|
|
|
do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
outb(CDOR,63); /*unlisten*/
|
|
|
|
do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(AUXMR,0x5E); /*Clear SYNC*/
|
|
outb (CDOR,95);/*untalk*/
|
|
do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
return(counter);
|
|
|
|
|
|
}
|
|
|
|
|
|
/* Return the status byte from device */
|
|
static char
|
|
spoll(unsigned char device)
|
|
{
|
|
int status=EWOULDBLOCK;
|
|
unsigned int statusbyte;
|
|
|
|
if (!(inb(ISR2)&8)) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(CDOR,(device&31)+64);/*address device to talk*/
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb (CDOR,32); /*Address controller (me) to listen*/
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
outb(AUXMR,0x5E);
|
|
outb (CDOR,0x18); /*Send SPE (serial poll enable)*/
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
/*wait for bus to be synced*/
|
|
if (!(inb(ISR0)&1)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR0)&1)&&status==EWOULDBLOCK);
|
|
|
|
outb(AUXMR,gts); /*Set to Standby (Controller)*/
|
|
|
|
if (!(inb(ISR1)&1)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR1)&1)&&status==EWOULDBLOCK);
|
|
outb(AUXMR,0x5E);
|
|
outb(AUXMR,tcs); /* Take control after next read*/
|
|
statusbyte=inb(DIR);
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(CDOR,0x19); /*SPD (serial poll disable)*/
|
|
|
|
/*wait for bus to be synced*/
|
|
if (!(inb(ISR0)&1)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR0)&1)&&status==EWOULDBLOCK);
|
|
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
outb(CDOR,95); /*untalk*/
|
|
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
outb(AUXMR,0x5E);
|
|
outb (CDOR,63);/*unlisten*/
|
|
if (!(inb(ISR2)&8)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR2)&8)&&status==EWOULDBLOCK);
|
|
|
|
/*wait for bus to be synced*/
|
|
if (!(inb(ISR0)&1)&&status==EWOULDBLOCK) do
|
|
status=tsleep((caddr_t)&gpib_sc,GPIBPRI,"gpibpoll",1);
|
|
while (!(inb(ISR0)&1)&&status==EWOULDBLOCK);
|
|
|
|
|
|
return(statusbyte);
|
|
|
|
|
|
}
|
|
|
|
|
|
static gp_devsw_installed = 0;
|
|
|
|
static void
|
|
gp_drvinit(void *unused)
|
|
{
|
|
dev_t dev;
|
|
|
|
if( ! gp_devsw_installed ) {
|
|
dev = makedev(CDEV_MAJOR, 0);
|
|
cdevsw_add(&dev,&gp_cdevsw, NULL);
|
|
gp_devsw_installed = 1;
|
|
}
|
|
}
|
|
|
|
SYSINIT(gpdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,gp_drvinit,NULL)
|
|
|
|
|
|
#endif /* NGPIB > 0 */
|