freebsd-nq/sys/netinet/in_pcb.c
Peter Wemm 33b3ac0633 Make the default behavior of local port assignment match traditional
systems (my last change did not mix well with some firewall
configurations).  As much as I dislike firewalls, this is one thing I
I was not prepared to break by default.. :-)

Allow the user to nominate one of three ranges of port numbers as
candidates for selecting a local address to replace a zero port number.
The ranges are selected via a setsockopt(s, IPPROTO_IP, IP_PORTRANGE, &arg)
call.  The three ranges are: default, high (to bypass firewalls) and
low (to get a port below 1024).

The default and high port ranges are sysctl settable under sysctl
net.inet.ip.portrange.*

This code also fixes a potential deadlock if the system accidently ran out
of local port addresses. It'd drop into an infinite while loop.

The secure port selection (for root) should reduce overheads and increase
reliability of rlogin/rlogind/rsh/rshd if they are modified to take
advantage of it.

Partly suggested by: pst
Reviewed by: wollman
1996-02-22 21:32:23 +00:00

695 lines
19 KiB
C

/*
* Copyright (c) 1982, 1986, 1991, 1993, 1995
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in_pcb.c 8.4 (Berkeley) 5/24/95
* $Id: in_pcb.c,v 1.16 1996/01/19 08:00:58 peter Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/time.h>
#include <sys/proc.h>
#include <sys/queue.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/route.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/in_pcb.h>
#include <netinet/in_var.h>
#include <netinet/ip_var.h>
struct in_addr zeroin_addr;
/*
* These configure the range of local port addresses assigned to
* "unspecified" outgoing connections/packets/whatever.
*/
static int ipport_firstauto = IPPORT_RESERVED; /* 1024 */
static int ipport_lastauto = IPPORT_USERRESERVED; /* 5000 */
static int ipport_hifirstauto = IPPORT_HIFIRSTAUTO; /* 40000 */
static int ipport_hilastauto = IPPORT_HILASTAUTO; /* 44999 */
SYSCTL_NODE(_net_inet_ip, IPPROTO_IP, portrange, CTLFLAG_RW, 0, "IP Ports");
SYSCTL_INT(_net_inet_ip_portrange, OID_AUTO, first, CTLFLAG_RW,
&ipport_firstauto, 0, "");
SYSCTL_INT(_net_inet_ip_portrange, OID_AUTO, last, CTLFLAG_RW,
&ipport_lastauto, 0, "");
SYSCTL_INT(_net_inet_ip_portrange, OID_AUTO, hifirst, CTLFLAG_RW,
&ipport_hifirstauto, 0, "");
SYSCTL_INT(_net_inet_ip_portrange, OID_AUTO, hilast, CTLFLAG_RW,
&ipport_hilastauto, 0, "");
static void in_pcbinshash __P((struct inpcb *));
static void in_rtchange __P((struct inpcb *, int));
int
in_pcballoc(so, pcbinfo)
struct socket *so;
struct inpcbinfo *pcbinfo;
{
register struct inpcb *inp;
int s;
MALLOC(inp, struct inpcb *, sizeof(*inp), M_PCB, M_NOWAIT);
if (inp == NULL)
return (ENOBUFS);
bzero((caddr_t)inp, sizeof(*inp));
inp->inp_pcbinfo = pcbinfo;
inp->inp_socket = so;
s = splnet();
LIST_INSERT_HEAD(pcbinfo->listhead, inp, inp_list);
in_pcbinshash(inp);
splx(s);
so->so_pcb = (caddr_t)inp;
return (0);
}
int
in_pcbbind(inp, nam)
register struct inpcb *inp;
struct mbuf *nam;
{
register struct socket *so = inp->inp_socket;
struct inpcbhead *head = inp->inp_pcbinfo->listhead;
unsigned short *lastport = &inp->inp_pcbinfo->lastport;
struct sockaddr_in *sin;
struct proc *p = curproc; /* XXX */
u_short lport = 0;
int wild = 0, reuseport = (so->so_options & SO_REUSEPORT);
int error;
if (in_ifaddr == 0)
return (EADDRNOTAVAIL);
if (inp->inp_lport || inp->inp_laddr.s_addr != INADDR_ANY)
return (EINVAL);
if ((so->so_options & (SO_REUSEADDR|SO_REUSEPORT)) == 0 &&
((so->so_proto->pr_flags & PR_CONNREQUIRED) == 0 ||
(so->so_options & SO_ACCEPTCONN) == 0))
wild = INPLOOKUP_WILDCARD;
if (nam) {
sin = mtod(nam, struct sockaddr_in *);
if (nam->m_len != sizeof (*sin))
return (EINVAL);
#ifdef notdef
/*
* We should check the family, but old programs
* incorrectly fail to initialize it.
*/
if (sin->sin_family != AF_INET)
return (EAFNOSUPPORT);
#endif
lport = sin->sin_port;
if (IN_MULTICAST(ntohl(sin->sin_addr.s_addr))) {
/*
* Treat SO_REUSEADDR as SO_REUSEPORT for multicast;
* allow complete duplication of binding if
* SO_REUSEPORT is set, or if SO_REUSEADDR is set
* and a multicast address is bound on both
* new and duplicated sockets.
*/
if (so->so_options & SO_REUSEADDR)
reuseport = SO_REUSEADDR|SO_REUSEPORT;
} else if (sin->sin_addr.s_addr != INADDR_ANY) {
sin->sin_port = 0; /* yech... */
if (ifa_ifwithaddr((struct sockaddr *)sin) == 0)
return (EADDRNOTAVAIL);
}
if (lport) {
struct inpcb *t;
/* GROSS */
if (ntohs(lport) < IPPORT_RESERVED &&
(error = suser(p->p_ucred, &p->p_acflag)))
return (EACCES);
t = in_pcblookup(head, zeroin_addr, 0,
sin->sin_addr, lport, wild);
if (t && (reuseport & t->inp_socket->so_options) == 0)
return (EADDRINUSE);
}
inp->inp_laddr = sin->sin_addr;
}
if (lport == 0) {
ushort first, last;
int count;
if (inp->inp_flags & INP_HIGHPORT) {
first = ipport_hifirstauto; /* sysctl */
last = ipport_hilastauto;
} else if (inp->inp_flags & INP_LOWPORT) {
if (error = suser(p->p_ucred, &p->p_acflag))
return (EACCES);
first = IPPORT_RESERVED - 1; /* 1023 */
last = 1;
} else {
first = ipport_firstauto; /* sysctl */
last = ipport_lastauto;
}
/*
* Simple check to ensure all ports are not used up causing
* a deadlock here.
*
* We split the two cases (up and down) so that the direction
* is not being tested on each round of the loop.
*/
if (first > last) {
/*
* counting down
*/
count = first - last;
do {
if (count-- <= 0) /* completely used? */
return (EADDRNOTAVAIL);
--*lastport;
if (*lastport > first || *lastport < last)
*lastport = first;
lport = htons(*lastport);
} while (in_pcblookup(head,
zeroin_addr, 0, inp->inp_laddr, lport, wild));
} else {
/*
* counting up
*/
count = last - first;
do {
if (count-- <= 0) /* completely used? */
return (EADDRNOTAVAIL);
++*lastport;
if (*lastport < first || *lastport > last)
*lastport = first;
lport = htons(*lastport);
} while (in_pcblookup(head,
zeroin_addr, 0, inp->inp_laddr, lport, wild));
}
}
inp->inp_lport = lport;
in_pcbrehash(inp);
return (0);
}
/*
* Transform old in_pcbconnect() into an inner subroutine for new
* in_pcbconnect(): Do some validity-checking on the remote
* address (in mbuf 'nam') and then determine local host address
* (i.e., which interface) to use to access that remote host.
*
* This preserves definition of in_pcbconnect(), while supporting a
* slightly different version for T/TCP. (This is more than
* a bit of a kludge, but cleaning up the internal interfaces would
* have forced minor changes in every protocol).
*/
int
in_pcbladdr(inp, nam, plocal_sin)
register struct inpcb *inp;
struct mbuf *nam;
struct sockaddr_in **plocal_sin;
{
struct in_ifaddr *ia;
register struct sockaddr_in *sin = mtod(nam, struct sockaddr_in *);
if (nam->m_len != sizeof (*sin))
return (EINVAL);
if (sin->sin_family != AF_INET)
return (EAFNOSUPPORT);
if (sin->sin_port == 0)
return (EADDRNOTAVAIL);
if (in_ifaddr) {
/*
* If the destination address is INADDR_ANY,
* use the primary local address.
* If the supplied address is INADDR_BROADCAST,
* and the primary interface supports broadcast,
* choose the broadcast address for that interface.
*/
#define satosin(sa) ((struct sockaddr_in *)(sa))
#define sintosa(sin) ((struct sockaddr *)(sin))
#define ifatoia(ifa) ((struct in_ifaddr *)(ifa))
if (sin->sin_addr.s_addr == INADDR_ANY)
sin->sin_addr = IA_SIN(in_ifaddr)->sin_addr;
else if (sin->sin_addr.s_addr == (u_long)INADDR_BROADCAST &&
(in_ifaddr->ia_ifp->if_flags & IFF_BROADCAST))
sin->sin_addr = satosin(&in_ifaddr->ia_broadaddr)->sin_addr;
}
if (inp->inp_laddr.s_addr == INADDR_ANY) {
register struct route *ro;
ia = (struct in_ifaddr *)0;
/*
* If route is known or can be allocated now,
* our src addr is taken from the i/f, else punt.
*/
ro = &inp->inp_route;
if (ro->ro_rt &&
(satosin(&ro->ro_dst)->sin_addr.s_addr !=
sin->sin_addr.s_addr ||
inp->inp_socket->so_options & SO_DONTROUTE)) {
RTFREE(ro->ro_rt);
ro->ro_rt = (struct rtentry *)0;
}
if ((inp->inp_socket->so_options & SO_DONTROUTE) == 0 && /*XXX*/
(ro->ro_rt == (struct rtentry *)0 ||
ro->ro_rt->rt_ifp == (struct ifnet *)0)) {
/* No route yet, so try to acquire one */
ro->ro_dst.sa_family = AF_INET;
ro->ro_dst.sa_len = sizeof(struct sockaddr_in);
((struct sockaddr_in *) &ro->ro_dst)->sin_addr =
sin->sin_addr;
rtalloc(ro);
}
/*
* If we found a route, use the address
* corresponding to the outgoing interface
* unless it is the loopback (in case a route
* to our address on another net goes to loopback).
*/
if (ro->ro_rt && !(ro->ro_rt->rt_ifp->if_flags & IFF_LOOPBACK))
ia = ifatoia(ro->ro_rt->rt_ifa);
if (ia == 0) {
u_short fport = sin->sin_port;
sin->sin_port = 0;
ia = ifatoia(ifa_ifwithdstaddr(sintosa(sin)));
if (ia == 0)
ia = ifatoia(ifa_ifwithnet(sintosa(sin)));
sin->sin_port = fport;
if (ia == 0)
ia = in_ifaddr;
if (ia == 0)
return (EADDRNOTAVAIL);
}
/*
* If the destination address is multicast and an outgoing
* interface has been set as a multicast option, use the
* address of that interface as our source address.
*/
if (IN_MULTICAST(ntohl(sin->sin_addr.s_addr)) &&
inp->inp_moptions != NULL) {
struct ip_moptions *imo;
struct ifnet *ifp;
imo = inp->inp_moptions;
if (imo->imo_multicast_ifp != NULL) {
ifp = imo->imo_multicast_ifp;
for (ia = in_ifaddr; ia; ia = ia->ia_next)
if (ia->ia_ifp == ifp)
break;
if (ia == 0)
return (EADDRNOTAVAIL);
}
}
/*
* Don't do pcblookup call here; return interface in plocal_sin
* and exit to caller, that will do the lookup.
*/
*plocal_sin = &ia->ia_addr;
}
return(0);
}
/*
* Outer subroutine:
* Connect from a socket to a specified address.
* Both address and port must be specified in argument sin.
* If don't have a local address for this socket yet,
* then pick one.
*/
int
in_pcbconnect(inp, nam)
register struct inpcb *inp;
struct mbuf *nam;
{
struct sockaddr_in *ifaddr;
register struct sockaddr_in *sin = mtod(nam, struct sockaddr_in *);
int error;
/*
* Call inner routine, to assign local interface address.
*/
if (error = in_pcbladdr(inp, nam, &ifaddr))
return(error);
if (in_pcblookuphash(inp->inp_pcbinfo, sin->sin_addr, sin->sin_port,
inp->inp_laddr.s_addr ? inp->inp_laddr : ifaddr->sin_addr,
inp->inp_lport) != NULL)
return (EADDRINUSE);
if (inp->inp_laddr.s_addr == INADDR_ANY) {
if (inp->inp_lport == 0)
(void)in_pcbbind(inp, (struct mbuf *)0);
inp->inp_laddr = ifaddr->sin_addr;
}
inp->inp_faddr = sin->sin_addr;
inp->inp_fport = sin->sin_port;
in_pcbrehash(inp);
return (0);
}
void
in_pcbdisconnect(inp)
struct inpcb *inp;
{
inp->inp_faddr.s_addr = INADDR_ANY;
inp->inp_fport = 0;
in_pcbrehash(inp);
if (inp->inp_socket->so_state & SS_NOFDREF)
in_pcbdetach(inp);
}
void
in_pcbdetach(inp)
struct inpcb *inp;
{
struct socket *so = inp->inp_socket;
int s;
so->so_pcb = 0;
sofree(so);
if (inp->inp_options)
(void)m_free(inp->inp_options);
if (inp->inp_route.ro_rt)
rtfree(inp->inp_route.ro_rt);
ip_freemoptions(inp->inp_moptions);
s = splnet();
LIST_REMOVE(inp, inp_hash);
LIST_REMOVE(inp, inp_list);
splx(s);
FREE(inp, M_PCB);
}
void
in_setsockaddr(inp, nam)
register struct inpcb *inp;
struct mbuf *nam;
{
register struct sockaddr_in *sin;
nam->m_len = sizeof (*sin);
sin = mtod(nam, struct sockaddr_in *);
bzero((caddr_t)sin, sizeof (*sin));
sin->sin_family = AF_INET;
sin->sin_len = sizeof(*sin);
sin->sin_port = inp->inp_lport;
sin->sin_addr = inp->inp_laddr;
}
void
in_setpeeraddr(inp, nam)
struct inpcb *inp;
struct mbuf *nam;
{
register struct sockaddr_in *sin;
nam->m_len = sizeof (*sin);
sin = mtod(nam, struct sockaddr_in *);
bzero((caddr_t)sin, sizeof (*sin));
sin->sin_family = AF_INET;
sin->sin_len = sizeof(*sin);
sin->sin_port = inp->inp_fport;
sin->sin_addr = inp->inp_faddr;
}
/*
* Pass some notification to all connections of a protocol
* associated with address dst. The local address and/or port numbers
* may be specified to limit the search. The "usual action" will be
* taken, depending on the ctlinput cmd. The caller must filter any
* cmds that are uninteresting (e.g., no error in the map).
* Call the protocol specific routine (if any) to report
* any errors for each matching socket.
*
* Must be called at splnet.
*/
void
in_pcbnotify(head, dst, fport_arg, laddr, lport_arg, cmd, notify)
struct inpcbhead *head;
struct sockaddr *dst;
u_int fport_arg, lport_arg;
struct in_addr laddr;
int cmd;
void (*notify) __P((struct inpcb *, int));
{
register struct inpcb *inp, *oinp;
struct in_addr faddr;
u_short fport = fport_arg, lport = lport_arg;
int errno, s;
if ((unsigned)cmd > PRC_NCMDS || dst->sa_family != AF_INET)
return;
faddr = ((struct sockaddr_in *)dst)->sin_addr;
if (faddr.s_addr == INADDR_ANY)
return;
/*
* Redirects go to all references to the destination,
* and use in_rtchange to invalidate the route cache.
* Dead host indications: notify all references to the destination.
* Otherwise, if we have knowledge of the local port and address,
* deliver only to that socket.
*/
if (PRC_IS_REDIRECT(cmd) || cmd == PRC_HOSTDEAD) {
fport = 0;
lport = 0;
laddr.s_addr = 0;
if (cmd != PRC_HOSTDEAD)
notify = in_rtchange;
}
errno = inetctlerrmap[cmd];
s = splnet();
for (inp = head->lh_first; inp != NULL;) {
if (inp->inp_faddr.s_addr != faddr.s_addr ||
inp->inp_socket == 0 ||
(lport && inp->inp_lport != lport) ||
(laddr.s_addr && inp->inp_laddr.s_addr != laddr.s_addr) ||
(fport && inp->inp_fport != fport)) {
inp = inp->inp_list.le_next;
continue;
}
oinp = inp;
inp = inp->inp_list.le_next;
if (notify)
(*notify)(oinp, errno);
}
splx(s);
}
/*
* Check for alternatives when higher level complains
* about service problems. For now, invalidate cached
* routing information. If the route was created dynamically
* (by a redirect), time to try a default gateway again.
*/
void
in_losing(inp)
struct inpcb *inp;
{
register struct rtentry *rt;
struct rt_addrinfo info;
if ((rt = inp->inp_route.ro_rt)) {
inp->inp_route.ro_rt = 0;
bzero((caddr_t)&info, sizeof(info));
info.rti_info[RTAX_DST] =
(struct sockaddr *)&inp->inp_route.ro_dst;
info.rti_info[RTAX_GATEWAY] = rt->rt_gateway;
info.rti_info[RTAX_NETMASK] = rt_mask(rt);
rt_missmsg(RTM_LOSING, &info, rt->rt_flags, 0);
if (rt->rt_flags & RTF_DYNAMIC)
(void) rtrequest(RTM_DELETE, rt_key(rt),
rt->rt_gateway, rt_mask(rt), rt->rt_flags,
(struct rtentry **)0);
else
/*
* A new route can be allocated
* the next time output is attempted.
*/
rtfree(rt);
}
}
/*
* After a routing change, flush old routing
* and allocate a (hopefully) better one.
*/
static void
in_rtchange(inp, errno)
register struct inpcb *inp;
int errno;
{
if (inp->inp_route.ro_rt) {
rtfree(inp->inp_route.ro_rt);
inp->inp_route.ro_rt = 0;
/*
* A new route can be allocated the next time
* output is attempted.
*/
}
}
struct inpcb *
in_pcblookup(head, faddr, fport_arg, laddr, lport_arg, flags)
struct inpcbhead *head;
struct in_addr faddr, laddr;
u_int fport_arg, lport_arg;
int flags;
{
register struct inpcb *inp, *match = NULL;
int matchwild = 3, wildcard;
u_short fport = fport_arg, lport = lport_arg;
int s;
s = splnet();
for (inp = head->lh_first; inp != NULL; inp = inp->inp_list.le_next) {
if (inp->inp_lport != lport)
continue;
wildcard = 0;
if (inp->inp_faddr.s_addr != INADDR_ANY) {
if (faddr.s_addr == INADDR_ANY)
wildcard++;
else if (inp->inp_faddr.s_addr != faddr.s_addr ||
inp->inp_fport != fport)
continue;
} else {
if (faddr.s_addr != INADDR_ANY)
wildcard++;
}
if (inp->inp_laddr.s_addr != INADDR_ANY) {
if (laddr.s_addr == INADDR_ANY)
wildcard++;
else if (inp->inp_laddr.s_addr != laddr.s_addr)
continue;
} else {
if (laddr.s_addr != INADDR_ANY)
wildcard++;
}
if (wildcard && (flags & INPLOOKUP_WILDCARD) == 0)
continue;
if (wildcard < matchwild) {
match = inp;
matchwild = wildcard;
if (matchwild == 0) {
break;
}
}
}
splx(s);
return (match);
}
/*
* Lookup PCB in hash list.
*/
struct inpcb *
in_pcblookuphash(pcbinfo, faddr, fport_arg, laddr, lport_arg)
struct inpcbinfo *pcbinfo;
struct in_addr faddr, laddr;
u_int fport_arg, lport_arg;
{
struct inpcbhead *head;
register struct inpcb *inp;
u_short fport = fport_arg, lport = lport_arg;
int s;
s = splnet();
/*
* First look for an exact match.
*/
head = &pcbinfo->hashbase[(faddr.s_addr + lport + fport) % pcbinfo->hashsize];
for (inp = head->lh_first; inp != NULL; inp = inp->inp_hash.le_next) {
if (inp->inp_faddr.s_addr != faddr.s_addr ||
inp->inp_fport != fport ||
inp->inp_lport != lport ||
inp->inp_laddr.s_addr != laddr.s_addr)
continue;
/*
* Move PCB to head of this hash chain so that it can be
* found more quickly in the future.
*/
if (inp != head->lh_first) {
LIST_REMOVE(inp, inp_hash);
LIST_INSERT_HEAD(head, inp, inp_hash);
}
break;
}
splx(s);
return (inp);
}
/*
* Insert PCB into hash chain. Must be called at splnet.
*/
static void
in_pcbinshash(inp)
struct inpcb *inp;
{
struct inpcbhead *head;
head = &inp->inp_pcbinfo->hashbase[(inp->inp_faddr.s_addr +
inp->inp_lport + inp->inp_fport) % inp->inp_pcbinfo->hashsize];
LIST_INSERT_HEAD(head, inp, inp_hash);
}
void
in_pcbrehash(inp)
struct inpcb *inp;
{
struct inpcbhead *head;
int s;
s = splnet();
LIST_REMOVE(inp, inp_hash);
head = &inp->inp_pcbinfo->hashbase[(inp->inp_faddr.s_addr +
inp->inp_lport + inp->inp_fport) % inp->inp_pcbinfo->hashsize];
LIST_INSERT_HEAD(head, inp, inp_hash);
splx(s);
}