d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8281556234
freebsd-nq/sys/pci/if_alreg.h
Bill Paul ab431312b4 This commit adds driver support for PCI fast ethernet cards based on the 
ADMtek AL981 "Comet" chipset. The AL981 is yet another DEC tulip clone,
except with simpler receive filter options. The AL981 has a built-in
transceiver, power management support, wake on LAN and flow control.
This chip performs extremely well; it's on par with the ASIX chipset
in terms of speed, which is pretty good (it can do 11.5MB/sec with TCP
easily).

I would have committed this driver sooner, except I ran into one problem
with the AL981 that required a workaround. When the chip is transmitting
at full speed, it will sometimes wedge if you queue a series of packets
that wrap from the end of the transmit descriptor list back to the
beginning. I can't explain why this happens, and none of the other tulip
clones behave this way. The workaround this is to just watch for the end
of the transmit ring and make sure that al_start() breaks out of its
packet queuing loop and waiting until the current batch of transmissions
completes before wrapping back to the start of the ring. Fortunately, this
does not significantly impact transmit performance.

This is one of those things that takes weeks of analysis just to come
up with two or three lines of code changes.
1999-05-21 04:37:48 +00:00

708 lines
22 KiB
C
Raw Blame History

/*
* Copyright (c) 1997, 1998, 1999
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: if_alreg.h,v 1.4 1999/05/21 00:07:34 wpaul Exp $
*/
/*
* COMET register definitions.
*/
#define AL_BUSCTL 0x00 /* bus control */
#define AL_TXSTART 0x08 /* tx start demand */
#define AL_RXSTART 0x10 /* rx start demand */
#define AL_RXADDR 0x18 /* rx descriptor list start addr */
#define AL_TXADDR 0x20 /* tx descriptor list start addr */
#define AL_ISR 0x28 /* interrupt status register */
#define AL_NETCFG 0x30 /* network config register */
#define AL_IMR 0x38 /* interrupt mask */
#define AL_FRAMESDISCARDED 0x40 /* # of discarded frames */
#define AL_SIO 0x48 /* MII and ROM/EEPROM access */
#define AL_RESERVED 0x50
#define AL_GENTIMER 0x58 /* general timer */
#define AL_GENPORT 0x60 /* general purpose port */
#define AL_WAKEUP_CTL 0x68 /* wake-up control/status register */
#define AL_WAKEUP_PAT 0x70 /* wake-up pattern data register */
#define AL_WATCHDOG 0x78 /* watchdog timer */
#define AL_ISR2 0x80 /* ISR assist register */
#define AL_IMR2 0x84 /* IRM assist register */
#define AL_COMMAND 0x88 /* command register */
#define AL_PCIPERF 0x8C /* pci perf counter */
#define AL_PWRMGMT 0x90 /* pwr management command/status */
#define AL_TXBURST 0x9C /* tx burst counter/timeout */
#define AL_FLASHPROM 0xA0 /* flash(boot) PROM port */
#define AL_PAR0 0xA4 /* station address */
#define AL_PAR1 0xA8 /* station address */
#define AL_MAR0 0xAC /* multicast hash filter */
#define AL_MAR1 0xB0 /* multicast hash filter */
#define AL_BMCR 0xB4 /* built in PHY control */
#define AL_BMSR 0xB8 /* built in PHY status */
#define AL_VENID 0xBC /* built in PHY ID0 */
#define AL_DEVID 0xC0 /* built in PHY ID1 */
#define AL_ANAR 0xC4 /* built in PHY autoneg advert */
#define AL_LPAR 0xC8 /* bnilt in PHY link part. ability */
#define AL_ANER 0xCC /* built in PHY autoneg expansion */
#define AL_PHY_MODECTL 0xD0 /* mode control */
#define AL_PHY_CONFIG 0xD4 /* config info and inter status */
#define AL_PHY_INTEN 0xD8 /* interrupto enable */
#define AL_PHY_MODECTL_100TX 0xDC /* 100baseTX control/status */
/*
* Bus control bits.
*/
#define AL_BUSCTL_RESET 0x00000001
#define AL_BUSCTL_ARBITRATION 0x00000002
#define AL_BUSCTL_SKIPLEN 0x0000007C
#define AL_BUSCTL_BIGENDIAN 0x00000080
#define AL_BUSCTL_BURSTLEN 0x00003F00
#define AL_BUSCTL_CACHEALIGN 0x0000C000
#define AL_BUSCTL_XMITPOLL 0x00060000
#define AL_BUSCTL_BUF_BIGENDIAN 0x00100000
#define AL_BUSCTL_READMULTI 0x00200000
#define AL_BUSCTL_READLINE 0x00800000
#define AL_BUSCTL_WRITEINVAL 0x01000000
#define AL_SKIPLEN_1LONG 0x00000004
#define AL_SKIPLEN_2LONG 0x00000008
#define AL_SKIPLEN_3LONG 0x00000010
#define AL_SKIPLEN_4LONG 0x00000020
#define AL_SKIPLEN_5LONG 0x00000040
#define AL_BURSTLEN_UNLIMIT 0x00000000
#define AL_BURSTLEN_1LONG 0x00000100
#define AL_BURSTLEN_2LONG 0x00000200
#define AL_BURSTLEN_4LONG 0x00000400
#define AL_BURSTLEN_8LONG 0x00000800
#define AL_BURSTLEN_16LONG 0x00001000
#define AL_BURSTLEN_32LONG 0x00002000
#define AL_CACHEALIGN_NONE 0x00000000
#define AL_CACHEALIGN_8LONG 0x00004000
#define AL_CACHEALIGN_16LONG 0x00008000
#define AL_CACHEALIGN_32LONG 0x0000C000
#define AL_TXPOLL_OFF 0x00000000
#define AL_TXPOLL_200U 0x00020000
#define AX_TXPOLL_800U 0x00040000
#define AL_TXPOLL_1600U 0x00060000
/*
* Interrupt status bits.
*/
#define AL_ISR_TX_OK 0x00000001
#define AL_ISR_TX_IDLE 0x00000002
#define AL_ISR_TX_NOBUF 0x00000004
#define AL_ISR_TX_JABBERTIMEO 0x00000008
#define AL_ISR_TX_UNDERRUN 0x00000020
#define AL_ISR_RX_OK 0x00000040
#define AL_ISR_RX_NOBUF 0x00000080
#define AL_ISR_RX_IDLE 0x00000100
#define AL_ISR_RX_WATDOGTIMEO 0x00000200
#define AL_ISR_TIMER_EXPIRED 0x00000800
#define AL_ISR_BUS_ERR 0x00002000
#define AL_ISR_ABNORMAL 0x00008000
#define AL_ISR_NORMAL 0x00010000
#define AL_ISR_RX_STATE 0x000E0000
#define AL_ISR_TX_STATE 0x00700000
#define AL_ISR_BUSERRTYPE 0x03800000
#define AL_RXSTATE_STOPPED 0x00000000 /* 000 - Stopped */
#define AL_RXSTATE_FETCH 0x00020000 /* 001 - Fetching descriptor */
#define AL_RXSTATE_ENDCHECK 0x00040000 /* 010 - check for rx end */
#define AL_RXSTATE_WAIT 0x00060000 /* 011 - waiting for packet */
#define AL_RXSTATE_SUSPEND 0x00080000 /* 100 - suspend rx */
#define AL_RXSTATE_CLOSE 0x000A0000 /* 101 - close tx desc */
#define AL_RXSTATE_FLUSH 0x000C0000 /* 110 - flush from FIFO */
#define AL_RXSTATE_DEQUEUE 0x000E0000 /* 111 - dequeue from FIFO */
#define AL_TXSTATE_RESET 0x00000000 /* 000 - reset */
#define AL_TXSTATE_FETCH 0x00100000 /* 001 - fetching descriptor */
#define AL_TXSTATE_WAITEND 0x00200000 /* 010 - wait for tx end */
#define AL_TXSTATE_READING 0x00300000 /* 011 - read and enqueue */
#define AL_TXSTATE_RSVD 0x00400000 /* 100 - reserved */
#define AL_TXSTATE_SETUP 0x00500000 /* 101 - setup packet */
#define AL_TXSTATE_SUSPEND 0x00600000 /* 110 - suspend tx */
#define AL_TXSTATE_CLOSE 0x00700000 /* 111 - close tx desc */
/*
* Network config bits.
*/
#define AL_NETCFG_RX_ON 0x00000002
#define AL_NETCFG_RX_BADFRAMES 0x00000008
#define AL_NETCFG_RX_BACKOFF 0x00000020
#define AL_NETCFG_RX_PROMISC 0x00000040
#define AL_NETCFG_RX_ALLMULTI 0x00000080
#define AL_NETCFG_OPMODE 0x00000C00
#define AL_NETCFG_FORCECOLL 0x00001000
#define AL_NETCFG_TX_ON 0x00002000
#define AL_NETCFG_TX_THRESH 0x0000C000
#define AL_NETCFG_HEARTBEAT 0x00080000 /* 0 == ON, 1 == OFF */
#define AL_NETCFG_STORENFWD 0x00200000
#define AL_OPMODE_NORM 0x00000000
#define AL_OPMODE_INTLOOP 0x00000400
#define AL_OPMODE_EXTLOOP 0x00000800
#define AL_TXTHRESH_72BYTES 0x00000000
#define AL_TXTHRESH_96BYTES 0x00004000
#define AL_TXTHRESH_128BYTES 0x00008000
#define AL_TXTHRESH_160BYTES 0x0000C000
/*
* Interrupt mask bits.
*/
#define AL_IMR_TX_OK 0x00000001
#define AL_IMR_TX_IDLE 0x00000002
#define AL_IMR_TX_NOBUF 0x00000004
#define AL_IMR_TX_JABBERTIMEO 0x00000008
#define AL_IMR_TX_UNDERRUN 0x00000020
#define AL_IMR_RX_OK 0x00000040
#define AL_IMR_RX_NOBUF 0x00000080
#define AL_IMR_RX_IDLE 0x00000100
#define AL_IMR_RX_WATDOGTIMEO 0x00000200
#define AL_IMR_TIMER_EXPIRED 0x00000800
#define AL_IMR_BUS_ERR 0x00002000
#define AL_IMR_ABNORMAL 0x00008000
#define AL_IMR_NORMAL 0x00010000
#define AL_INTRS \
(AL_IMR_RX_OK|AL_IMR_TX_OK|AL_IMR_RX_NOBUF|AL_IMR_RX_WATDOGTIMEO|\
AL_IMR_TX_NOBUF|AL_IMR_TX_UNDERRUN|AL_IMR_BUS_ERR| \
AL_IMR_ABNORMAL|AL_IMR_NORMAL|AL_IMR_TX_IDLE|AL_IMR_RX_IDLE)
/*
* Missed packer register.
*/
#define AL_MISSEDPKT_CNT 0x0000FFFF
#define AL_MISSEDPKT_OFLOW 0x00010000
/*
* Serial I/O (EEPROM/ROM) bits.
*/
#define AL_SIO_EE_CS 0x00000001 /* EEPROM chip select */
#define AL_SIO_EE_CLK 0x00000002 /* EEPROM clock */
#define AL_SIO_EE_DATAIN 0x00000004 /* EEPROM data output */
#define AL_SIO_EE_DATAOUT 0x00000008 /* EEPROM data input */
#define AL_SIO_EESEL 0x00000800
#define AL_SIO_ROMCTL_WRITE 0x00002000
#define AL_SIO_ROMCTL_READ 0x00004000
#define AL_EECMD_WRITE 0x140
#define AL_EECMD_READ 0x180
#define AL_EECMD_ERASE 0x1c0
#define AL_EE_NODEADDR_OFFSET 0x70
#define AL_EE_NODEADDR 4
/*
* General purpose timer register
*/
#define AL_TIMER_VALUE 0x0000FFFF
#define AL_TIMER_CONTINUOUS 0x00010000
/*
* Wakeup control/status register.
*/
#define AL_WU_LINKSTS 0x00000001 /* link status changed */
#define AL_WU_MAGICPKT 0x00000002 /* magic packet received */
#define AL_WU_WUPKT 0x00000004 /* wake up pkt received */
#define AL_WU_LINKSTS_ENB 0x00000100 /* enable linksts event */
#define AL_WU_MAGICPKT_ENB 0x00000200 /* enable magicpkt event */
#define AL_WU_WUPKT_ENB 0x00000400 /* enable wakeup pkt event */
#define AL_WU_LINKON_ENB 0x00010000 /* enable link on detect */
#define AL_WU_LINKOFF_ENB 0x00020000 /* enable link off detect */
#define AL_WU_WKUPMATCH_PAT5 0x02000000 /* enable wkup pat 5 match */
#define AL_WU_WKUPMATCH_PAT4 0x04000000 /* enable wkup pat 4 match */
#define AL_WU_WKUPMATCH_PAT3 0x08000000 /* enable wkup pat 3 match */
#define AL_WU_WKUPMATCH_PAT2 0x10000000 /* enable wkup pat 2 match */
#define AL_WU_WKUPMATCH_PAT1 0x20000000 /* enable wkup pat 1 match */
#define AL_WU_CRCTYPE 0x40000000 /* crc: 0=0000, 1=ffff */
/*
* Wakeup pattern structure.
*/
struct al_wu_pattern {
u_int32_t al_wu_bits[4];
};
struct al_wakeup {
struct al_wu_pattern al_wu_pat;
u_int16_t al_wu_crc1;
u_int16_t al_wu_offset1;
};
struct al_wakup_record {
struct al_wakeup al_wakeup[5];
};
/*
* Watchdog timer register.
*/
#define AL_WDOG_JABDISABLE 0x00000001
#define AL_WDOG_NONJABBER 0x00000002
#define AL_WDOG_JABCLK 0x00000004
#define AL_WDOG_RXWDOG_DIS 0x00000010
#define AL_WDOG_RXWDOG_REL 0x00000020
/*
* Assistant status register.
*/
#define AL_ISR2_ABNORMAL 0x00008000
#define AL_ISR2_NORMAL 0x00010000
#define AL_ISR2_RX_STATE 0x000E0000
#define AL_ISR2_TX_STATE 0x00700000
#define AL_ISR2_BUSERRTYPE 0x03800000
#define AL_ISR2_PAUSE 0x04000000 /* PAUSE frame received */
#define AL_ISR2_TX_DEFER 0x10000000
#define AL_ISR2_XCVR_INT 0x20000000
#define AL_ISR2_RX_EARLY 0x40000000
#define AL_ISR2_TX_EARLY 0x80000000
/*
* Assistant mask register.
*/
#define AL_IMR2_ABNORMAL 0x00008000
#define AL_IMR2_NORMAL 0x00010000
#define AL_IMR2_PAUSE 0x04000000 /* PAUSE frame received */
#define AL_IMR2_TX_DEFER 0x10000000
#define AL_IMR2_XCVR_INT 0x20000000
#define AL_IMR2_RX_EARLY 0x40000000
#define AL_IMR2_TX_EARLY 0x80000000
/*
* Command register, some bits loaded from EEPROM.
*/
#define AL_CMD_TXURUN_REC 0x00000001 /* enable TX underflow recovery */
#define AL_CMD_SOFTWARE_INT 0x00000002 /* software interrupt */
#define AL_CMD_DRT 0x0000000C /* drain receive threshold */
#define AL_CMD_RXTHRESH_ENB 0x00000010 /* rx threshold enable */
#define AL_CMD_PAUSE 0x00000020
#define AL_CMD_RST_WU_PTR 0x00000040 /* reset wakeup pattern reg. */
/* Values below loaded from EEPROM. */
#define AL_CMD_WOL_ENB 0x00040000 /* WOL enable */
#define AL_CMD_PM_ENB 0x00080000 /* pwr mgmt enable */
#define AL_CMD_RX_FIFO 0x00300000
#define AL_CMD_LED_MODE 0x00400000
#define AL_CMD_CURRENT_MODE 0x70000000
#define AL_CMD_D3COLD 0x80000000
/*
* PCI performance counter.
*/
#define AL_PCI_DW_CNT 0x000000FF
#define AL_PCI_CLK 0xFFFF0000
/*
* Power management command and status.
*/
#define AL_PWRM_PWR_STATE 0x00000003
#define AL_PWRM_PME_EN 0x00000100
#define AL_PWRM_DSEL 0x00001E00
#define AL_PWRM_DSCALE 0x00006000
#define AL_PWRM_PME_STAT 0x00008000
/*
* TX burst count / timeout register.
*/
#define AL_TXB_TIMEO 0x00000FFF
#define AL_TXB_BURSTCNT 0x0000F000
/*
* Flash PROM register.
*/
#define AL_PROM_DATA 0x0000000F
#define AL_PROM_ADDR 0x01FFFFF0
#define AL_PROM_WR_ENB 0x04000000
#define AL_PROM_BRA16_ON 0x80000000
/*
* COMET TX/RX list structure.
*/
struct al_desc {
volatile u_int32_t al_status;
volatile u_int32_t al_ctl;
volatile u_int32_t al_ptr1;
volatile u_int32_t al_ptr2;
};
#define al_data al_ptr1
#define al_next al_ptr2
#define AL_RXSTAT_FIFOOFLOW 0x00000001
#define AL_RXSTAT_CRCERR 0x00000002
#define AL_RXSTAT_DRIBBLE 0x00000004
#define AL_RXSTAT_WATCHDOG 0x00000010
#define AL_RXSTAT_FRAMETYPE 0x00000020 /* 0 == IEEE 802.3 */
#define AL_RXSTAT_COLLSEEN 0x00000040
#define AL_RXSTAT_GIANT 0x00000080
#define AL_RXSTAT_LASTFRAG 0x00000100
#define AL_RXSTAT_FIRSTFRAG 0x00000200
#define AL_RXSTAT_MULTICAST 0x00000400
#define AL_RXSTAT_RUNT 0x00000800
#define AL_RXSTAT_RXTYPE 0x00003000
#define AL_RXSTAT_RXERR 0x00008000
#define AL_RXSTAT_RXLEN 0x3FFF0000
#define AL_RXSTAT_OWN 0x80000000
#define AL_RXBYTES(x) ((x & AL_RXSTAT_RXLEN) >> 16)
#define AL_RXSTAT (AL_RXSTAT_FIRSTFRAG|AL_RXSTAT_LASTFRAG|AL_RXSTAT_OWN)
#define AL_RXCTL_BUFLEN1 0x00000FFF
#define AL_RXCTL_BUFLEN2 0x00FFF000
#define AL_RXCTL_RLAST 0x02000000
#define AL_TXSTAT_DEFER 0x00000001
#define AL_TXSTAT_UNDERRUN 0x00000002
#define AL_TXSTAT_LINKFAIL 0x00000003
#define AL_TXSTAT_COLLCNT 0x00000078
#define AL_TXSTAT_SQE 0x00000080
#define AL_TXSTAT_EXCESSCOLL 0x00000100
#define AL_TXSTAT_LATECOLL 0x00000200
#define AL_TXSTAT_NOCARRIER 0x00000400
#define AL_TXSTAT_CARRLOST 0x00000800
#define AL_TXSTAT_JABTIMEO 0x00004000
#define AL_TXSTAT_ERRSUM 0x00008000
#define AL_TXSTAT_OWN 0x80000000
#define AL_TXCTL_BUFLEN1 0x000007FF
#define AL_TXCTL_BUFLEN2 0x003FF800
#define AL_TXCTL_PAD 0x00800000
#define AL_TXCTL_TLINK 0x01000000
#define AL_TXCTL_TLAST 0x02000000
#define AL_TXCTL_NOCRC 0x04000000
#define AL_TXCTL_FIRSTFRAG 0x20000000
#define AL_TXCTL_LASTFRAG 0x40000000
#define AL_TXCTL_FINT 0x80000000
#define AL_MAXFRAGS 16
#define AL_RX_LIST_CNT 64
#define AL_TX_LIST_CNT 128
#define AL_MIN_FRAMELEN 60
/*
* A tx 'super descriptor' is actually 16 regular descriptors
* back to back.
*/
struct al_txdesc {
volatile struct al_desc al_frag[AL_MAXFRAGS];
};
#define AL_TXNEXT(x) x->al_ptr->al_frag[x->al_lastdesc].al_next
#define AL_TXSTATUS(x) x->al_ptr->al_frag[x->al_lastdesc].al_status
#define AL_TXCTL(x) x->al_ptr->al_frag[x->al_lastdesc].al_ctl
#define AL_TXDATA(x) x->al_ptr->al_frag[x->al_lastdesc].al_data
#define AL_TXOWN(x) x->al_ptr->al_frag[0].al_status
#define AL_UNSENT 0x12341234
struct al_list_data {
volatile struct al_desc al_rx_list[AL_RX_LIST_CNT];
volatile struct al_txdesc al_tx_list[AL_TX_LIST_CNT];
};
struct al_chain {
volatile struct al_txdesc *al_ptr;
struct mbuf *al_mbuf;
struct al_chain *al_nextdesc;
u_int8_t al_lastdesc;
};
struct al_chain_onefrag {
volatile struct al_desc *al_ptr;
struct mbuf *al_mbuf;
struct al_chain_onefrag *al_nextdesc;
};
struct al_chain_data {
struct al_chain_onefrag al_rx_chain[AL_RX_LIST_CNT];
struct al_chain al_tx_chain[AL_TX_LIST_CNT];
struct al_chain_onefrag *al_rx_head;
struct al_chain *al_tx_head;
struct al_chain *al_tx_tail;
struct al_chain *al_tx_free;
};
struct al_type {
u_int16_t al_vid;
u_int16_t al_did;
char *al_name;
};
struct al_mii_frame {
u_int8_t mii_stdelim;
u_int8_t mii_opcode;
u_int8_t mii_phyaddr;
u_int8_t mii_regaddr;
u_int8_t mii_turnaround;
u_int16_t mii_data;
};
/*
* MII constants
*/
#define AL_MII_STARTDELIM 0x01
#define AL_MII_READOP 0x02
#define AL_MII_WRITEOP 0x01
#define AL_MII_TURNAROUND 0x02
#define AL_FLAG_FORCEDELAY 1
#define AL_FLAG_SCHEDDELAY 2
#define AL_FLAG_DELAYTIMEO 3
struct al_softc {
struct arpcom arpcom; /* interface info */
struct ifmedia ifmedia; /* media info */
bus_space_handle_t al_bhandle; /* bus space handle */
bus_space_tag_t al_btag; /* bus space tag */
struct al_type *al_info; /* COMET adapter info */
struct al_type *al_pinfo; /* phy info */
u_int8_t al_unit; /* interface number */
u_int8_t al_type;
u_int8_t al_phy_addr; /* PHY address */
u_int8_t al_tx_pend; /* TX pending */
u_int8_t al_want_auto;
u_int8_t al_autoneg;
caddr_t al_ldata_ptr;
struct al_list_data *al_ldata;
struct al_chain_data al_cdata;
u_int8_t al_cachesize;
};
/*
* register space access macros
*/
#define CSR_WRITE_4(sc, reg, val) \
bus_space_write_4(sc->al_btag, sc->al_bhandle, reg, val)
#define CSR_WRITE_2(sc, reg, val) \
bus_space_write_2(sc->al_btag, sc->al_bbhandle, reg, val)
#define CSR_WRITE_1(sc, reg, val) \
bus_space_write_1(sc->al_btag, sc->al_bhandle, reg, val)
#define CSR_READ_4(sc, reg) \
bus_space_read_4(sc->al_btag, sc->al_bhandle, reg)
#define CSR_READ_2(sc, reg) \
bus_space_read_2(sc->al_btag, sc->al_bhandle, reg)
#define CSR_READ_1(sc, reg) \
bus_space_read_1(sc->al_btag, sc->al_bhandle, reg)
#define AL_TIMEOUT 1000
/*
* General constants that are fun to know.
*
* ADMtek PCI vendor ID
*/
#define AL_VENDORID 0x1317
/*
* AL981 device IDs.
*/
#define AL_DEVICEID_AL981 0x0981
/*
* Texas Instruments PHY identifiers
*/
#define TI_PHY_VENDORID 0x4000
#define TI_PHY_10BT 0x501F
#define TI_PHY_100VGPMI 0x502F
/*
* These ID values are for the NS DP83840A 10/100 PHY
*/
#define NS_PHY_VENDORID 0x2000
#define NS_PHY_83840A 0x5C0F
/*
* Level 1 10/100 PHY
*/
#define LEVEL1_PHY_VENDORID 0x7810
#define LEVEL1_PHY_LXT970 0x000F
/*
* Intel 82555 10/100 PHY
*/
#define INTEL_PHY_VENDORID 0x0A28
#define INTEL_PHY_82555 0x015F
/*
* SEEQ 80220 10/100 PHY
*/
#define SEEQ_PHY_VENDORID 0x0016
#define SEEQ_PHY_80220 0xF83F
/*
* PCI low memory base and low I/O base register, and
* other PCI registers.
*/
#define AL_PCI_VENDOR_ID 0x00
#define AL_PCI_DEVICE_ID 0x02
#define AL_PCI_COMMAND 0x04
#define AL_PCI_STATUS 0x06
#define AL_PCI_REVID 0x08
#define AL_PCI_CLASSCODE 0x09
#define AL_PCI_CACHELEN 0x0C
#define AL_PCI_LATENCY_TIMER 0x0D
#define AL_PCI_HEADER_TYPE 0x0E
#define AL_PCI_LOIO 0x10
#define AL_PCI_LOMEM 0x14
#define AL_PCI_BIOSROM 0x30
#define AL_PCI_INTLINE 0x3C
#define AL_PCI_INTPIN 0x3D
#define AL_PCI_MINGNT 0x3E
#define AL_PCI_MINLAT 0x0F
#define AL_PCI_RESETOPT 0x48
#define AL_PCI_EEPROM_DATA 0x4C
/* power management registers */
#define AL_PCI_CAPID 0x44 /* 8 bits */
#define AL_PCI_NEXTPTR 0x45 /* 8 bits */
#define AL_PCI_PWRMGMTCAP 0x46 /* 16 bits */
#define AL_PCI_PWRMGMTCTRL 0x48 /* 16 bits */
#define AL_PSTATE_MASK 0x0003
#define AL_PSTATE_D0 0x0000
#define AL_PSTATE_D1 0x0001
#define AL_PSTATE_D2 0x0002
#define AL_PSTATE_D3 0x0003
#define AL_PME_EN 0x0010
#define AL_PME_STATUS 0x8000
#define PHY_UNKNOWN 6
#define AL_PHYADDR_MIN 0x00
#define AL_PHYADDR_MAL 0x1F
#define PHY_BMCR 0x00
#define PHY_BMSR 0x01
#define PHY_VENID 0x02
#define PHY_DEVID 0x03
#define PHY_ANAR 0x04
#define PHY_LPAR 0x05
#define PHY_ANEXP 0x06
#define PHY_ANAR_NEXTPAGE 0x8000
#define PHY_ANAR_RSVD0 0x4000
#define PHY_ANAR_TLRFLT 0x2000
#define PHY_ANAR_RSVD1 0x1000
#define PHY_ANAR_RSVD2 0x0800
#define PHY_ANAR_RSVD3 0x0400
#define PHY_ANAR_100BT4 0x0200
#define PHY_ANAR_100BTXFULL 0x0100
#define PHY_ANAR_100BTXHALF 0x0080
#define PHY_ANAR_10BTFULL 0x0040
#define PHY_ANAR_10BTHALF 0x0020
#define PHY_ANAR_PROTO4 0x0010
#define PHY_ANAR_PROTO3 0x0008
#define PHY_ANAR_PROTO2 0x0004
#define PHY_ANAR_PROTO1 0x0002
#define PHY_ANAR_PROTO0 0x0001
/*
* These are the register definitions for the PHY (physical layer
* interface chip).
*/
/*
* PHY BMCR Basic Mode Control Register
*/
#define PHY_BMCR_RESET 0x8000
#define PHY_BMCR_LOOPBK 0x4000
#define PHY_BMCR_SPEEDSEL 0x2000
#define PHY_BMCR_AUTONEGENBL 0x1000
#define PHY_BMCR_RSVD0 0x0800 /* write as zero */
#define PHY_BMCR_ISOLATE 0x0400
#define PHY_BMCR_AUTONEGRSTR 0x0200
#define PHY_BMCR_DUPLEX 0x0100
#define PHY_BMCR_COLLTEST 0x0080
#define PHY_BMCR_RSVD1 0x0040 /* write as zero, don't care */
#define PHY_BMCR_RSVD2 0x0020 /* write as zero, don't care */
#define PHY_BMCR_RSVD3 0x0010 /* write as zero, don't care */
#define PHY_BMCR_RSVD4 0x0008 /* write as zero, don't care */
#define PHY_BMCR_RSVD5 0x0004 /* write as zero, don't care */
#define PHY_BMCR_RSVD6 0x0002 /* write as zero, don't care */
#define PHY_BMCR_RSVD7 0x0001 /* write as zero, don't care */
/*
* RESET: 1 == software reset, 0 == normal operation
* Resets status and control registers to default values.
* Relatches all hardware config values.
*
* LOOPBK: 1 == loopback operation enabled, 0 == normal operation
*
* SPEEDSEL: 1 == 100Mb/s, 0 == 10Mb/s
* Link speed is selected byt his bit or if auto-negotiation if bit
* 12 (AUTONEGENBL) is set (in which case the value of this register
* is ignored).
*
* AUTONEGENBL: 1 == Autonegotiation enabled, 0 == Autonegotiation disabled
* Bits 8 and 13 are ignored when autoneg is set, otherwise bits 8 and 13
* determine speed and mode. Should be cleared and then set if PHY configured
* for no autoneg on startup.
*
* ISOLATE: 1 == isolate PHY from MII, 0 == normal operation
*
* AUTONEGRSTR: 1 == restart autonegotiation, 0 = normal operation
*
* DUPLEX: 1 == full duplex mode, 0 == half duplex mode
*
* COLLTEST: 1 == collision test enabled, 0 == normal operation
*/
/*
* PHY, BMSR Basic Mode Status Register
*/
#define PHY_BMSR_100BT4 0x8000
#define PHY_BMSR_100BTXFULL 0x4000
#define PHY_BMSR_100BTXHALF 0x2000
#define PHY_BMSR_10BTFULL 0x1000
#define PHY_BMSR_10BTHALF 0x0800
#define PHY_BMSR_RSVD1 0x0400 /* write as zero, don't care */
#define PHY_BMSR_RSVD2 0x0200 /* write as zero, don't care */
#define PHY_BMSR_RSVD3 0x0100 /* write as zero, don't care */
#define PHY_BMSR_RSVD4 0x0080 /* write as zero, don't care */
#define PHY_BMSR_MFPRESUP 0x0040
#define PHY_BMSR_AUTONEGCOMP 0x0020
#define PHY_BMSR_REMFAULT 0x0010
#define PHY_BMSR_CANAUTONEG 0x0008
#define PHY_BMSR_LINKSTAT 0x0004
#define PHY_BMSR_JABBER 0x0002
#define PHY_BMSR_EXTENDED 0x0001
#ifdef __alpha__
#undef vtophys
#define vtophys(va) (pmap_kextract(((vm_offset_t) (va))) \
+ 1*1024*1024*1024)
#endif
Reference in New Issue View Git Blame Copy Permalink