Adrian Chadd 2b200bb4ce Extend the non-aggregate TX descriptor chain routine to be aware of: ... * the descriptor ID, and * the multi-buffer support that the EDMA chips support. This is required for successful MAC transmission of multi-descriptor frames. The MAC simply hangs if there are NULL buffers + 0 length pointers, but the descriptor did have TxMore set. This won't be done for the 11n aggregate path, as that will be modified to use the newer API (ie, ath_hal_filltxdesc() and then set first|middle| last_aggr), which will deprecate some of the current code. TODO: * Populate the numTxMaps field in the HAL, then make sure that's fetched by the driver. Then I can undo that hack. Tested: * AR9380, AP mode, TX'ing non-aggregate 802.11n frames; * AR9280, STA/AP mode, doing aggregate and non-aggregate traffic.		2012-08-15 08:14:16 +00:00
..
ath_dfs/null	In a complete lack of foresight on my part, my previous commit broke	2012-06-24 08:47:19 +00:00
ath_hal	Bump up the rate control table size to incorporate 3 stream entries.	2012-08-15 08:06:06 +00:00
ath_rate	Add a missing comma.	2012-08-15 07:50:42 +00:00
ah_osdep.c	Fix the HAL debugging to only use one bit to mark a message as unmaskable.	2012-07-01 02:34:32 +00:00
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_beacon.c	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	Add the AR9380 HAL to the TX descriptor debugging, in order to dump all	2012-08-11 22:39:27 +00:00
if_ath_debug.h	Map ATH_KTR_* to 0 when ATH_DEBUG is not defined. This effectively NOPs	2012-07-11 12:10:13 +00:00
if_ath_keycache.c	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_keycache.h	Add a 'vap' to ath_keyset().	2011-11-08 19:25:52 +00:00
if_ath_led.c	Bring over the initial 802.11n bluetooth coexistence support code.	2012-06-26 22:16:53 +00:00
if_ath_led.h	Refactor out the software LED config code into a common function, called	2011-12-26 05:46:22 +00:00
if_ath_misc.h	Break out the TX completion code into a separate function, so it can be	2012-08-14 22:32:20 +00:00
if_ath_pci.c	Flesh out a new DMA map for the EDMA TX completion status, as well	2012-07-23 02:49:25 +00:00
if_ath_rx_edma.c	Remove unnecessary debugging printf()s.	2012-08-06 22:54:10 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	Remove unnecessary debugging printf()s.	2012-08-06 22:54:10 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_sysctl.c	Dump out the TX FIFO depth.	2012-08-14 22:34:22 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tdma.c	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tdma.h	Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.	2012-05-20 02:49:42 +00:00
if_ath_tsf.h	Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].	2012-05-20 02:05:10 +00:00
if_ath_tx_edma.c	Revert the ath_tx_draintxq() method, and instead teach it the minimum	2012-08-12 00:46:15 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Shuffle the call to ath_hal_setuplasttxdesc() to _after_ the rate control	2012-07-31 17:08:29 +00:00
if_ath_tx_ht.h	Introduce TX aggregation and software TX queue management	2011-11-08 22:43:13 +00:00
if_ath_tx.c	Extend the non-aggregate TX descriptor chain routine to be aware of:	2012-08-15 08:14:16 +00:00
if_ath_tx.h	Revert the ath_tx_draintxq() method, and instead teach it the minimum	2012-08-12 00:46:15 +00:00
if_ath.c	Implement a sequential descriptor ID value and stuff it in the ath_buf.	2012-08-15 06:48:34 +00:00
if_athdfs.h	Change the ath_dfs_process_phy_err() method to take an mbuf rather than	2012-06-24 08:09:06 +00:00
if_athioctl.h	Placeholder ioctl for an upcoming rate control statistics API change.	2012-07-31 02:18:10 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Implement a sequential descriptor ID value and stuff it in the ath_buf.	2012-08-15 06:48:34 +00:00