Justin T. Gibbs 803bbd69c4 Add some useful target mode diagnostics for incoming commands ...

under the AHC_SHOW_TQIN debug flag.

2004-11-18 20:33:43 +00:00

..

aicasm

For variables that are only checked with defined(), don't provide

2004-10-24 15:33:08 +00:00

ahc_eisa.c

Add an ISA attachement to the aic7xxx driver to handle 284X controllers.

2004-08-17 00:14:31 +00:00

ahc_isa.c

Skip probe attempts for ISA PnP devices.

2004-10-15 23:39:52 +00:00

ahc_pci.c

Add an ISA attachement to the aic7xxx driver to handle 284X controllers.

2004-08-17 00:14:31 +00:00

ahd_pci.c

Convert callers to the new bus_alloc_resource_any(9) API.

2004-03-17 17:50:55 +00:00

aic7xxx_93cx6.c

ahc_eisa.c:

2003-12-17 00:02:10 +00:00

aic7xxx_93cx6.h

…

aic7xxx_inline.h

ahc_eisa.c:

2003-12-17 00:02:10 +00:00

aic7xxx_osm.c

Add an ISA attachement to the aic7xxx driver to handle 284X controllers.

2004-08-17 00:14:31 +00:00

aic7xxx_osm.h

Add an ISA attachement to the aic7xxx driver to handle 284X controllers.

2004-08-17 00:14:31 +00:00

aic7xxx_pci.c

In the PCI error interrupt handler, specify the width of the PCI configuration

2004-08-22 14:02:43 +00:00

aic7xxx.c

Add some useful target mode diagnostics for incoming commands

2004-11-18 20:33:43 +00:00

aic7xxx.h

aic7xxx.h:

2004-10-19 20:48:06 +00:00

aic7xxx.reg

ahc_eisa.c:

2003-12-17 00:02:10 +00:00

aic7xxx.seq

Extend critical section protection around portions of selection processing

2004-08-13 21:41:23 +00:00

aic79xx_inline.h

Correct a very rare case where command ordering could be compromised

2004-08-04 17:55:34 +00:00

aic79xx_osm.c

Add an ISA attachement to the aic7xxx driver to handle 284X controllers.

2004-08-17 00:14:31 +00:00

aic79xx_osm.h

Add missing <sys/module.h> includes

2004-05-30 20:08:47 +00:00

aic79xx_pci.c

Set AHD_BUSFREEREV_BUG in the bug field for Rev B chips, not the

2004-08-22 13:54:27 +00:00

aic79xx.c

Revert to basing all timeout/timer values in ms rather than us. The switch

2004-11-18 20:22:31 +00:00

aic79xx.h

Revert to basing all timeout/timer values in ms rather than us. The switch

2004-11-18 20:22:31 +00:00

aic79xx.reg

Correct a very rare case where command ordering could be compromised

2004-08-04 17:55:34 +00:00

aic79xx.seq

Correct a very rare case where command ordering could be compromised

2004-08-04 17:55:34 +00:00

aic7770.c

Remove erroneous semicolons.

2004-07-13 16:06:19 +00:00

aic_osm_lib.c

Add an ISA attachement to the aic7xxx driver to handle 284X controllers.

2004-08-17 00:14:31 +00:00

aic_osm_lib.h

Revert to basing all timeout/timer values in ms rather than us. The switch

2004-11-18 20:22:31 +00:00