freebsd-nq/share/man/man4/iic.4
Rafal Jaworowski 1aef11be0e Teach iic(4) the 'repeated start' I2C condition. This will be used by the
upcoming i2c(8) diag utility.

Reviewed by:	bms, stas
Obtained from:	Semihalf
2009-01-26 13:53:39 +00:00

189 lines
4.5 KiB
Groff

.\" Copyright (c) 2006, M. Warner Losh
.\" Copyright (c) 1998, Nicolas Souchu
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd September 6, 2006
.Dt IIC 4
.Os
.Sh NAME
.Nm iic
.Nd I2C generic I/O device driver
.Sh SYNOPSIS
.Cd "device iic"
.Pp
.In dev/iicbus/iic.h
.Sh DESCRIPTION
The
.Nm
device driver provides generic I/O to any
.Xr iicbus 4
instance.
In order to control I2C devices, use
.Pa /dev/iic?
with the
following ioctls:
.Bl -tag -width ".Dv I2CRPTSTART"
.It Dv I2CSTART
.Pq Vt "struct iiccmd"
Sends the start condition to the slave specified by the
.Va slave
element to the bus.
All other elements are ignored.
.It Dv I2CRPTSTART
.Pq Vt "struct iiccmd"
Sends the repeated start condition to the slave specified by the
.Va slave
element to the bus.
All other elements are ignored.
.It Dv I2CSTOP
No argument is passed.
Sends the stop condition to the bus.
This terminates the current transaction.
.It Dv I2CRSTCARD
.Pq Vt "struct iiccmd"
Resets the bus.
The argument is completely ignored.
.It Dv I2CWRITE
.Pq Vt "struct iiccmd"
Writes data to the
.Xr iicbus 4 .
The bus should already be started.
The
.Va slave
element is ignored.
The
.Va count
element is the number of bytes to write.
The
.Va last
element is a boolean flag.
It is non-zero when additional write commands will follow.
The
.Va buf
element is a pointer to the data to write to the bus.
.It Dv I2CREAD
.Pq Vt "struct iiccmd"
Reads data from the
.Xr iicbus 4 .
The bus should already be started.
The
.Va slave
element is ignored.
The
.Va count
element is the number of bytes to write.
The
.Va last
element is a boolean flag.
It is non-zero when additional write commands will follow.
The
.Va buf
element is a pointer to where to store the data read from the bus.
Short reads on the bus produce undefined results.
.It Dv I2CRDWR
.Pq Vt "struct iic_rdwr_data"
Generic read/write interface.
Allows for an arbitrary number of commands to be sent to
an arbitrary number of devices on the bus.
A read transfer is specified if
.Dv IIC_M_RD
is set in
.Va flags .
Otherwise the transfer is a write transfer.
The
.Va slave
element specifies the 7-bit address for the transfer.
The
.Va len
element is the length of the data.
The
.Va buf
element is a buffer for that data.
This ioctl is intended to be
.Tn Linux
compatible.
.El
.Pp
The following data structures are defined in
.In dev/iicbus/iic.h
and referenced above:
.Bd -literal -offset indent
struct iiccmd {
u_char slave;
int count;
int last;
char *buf;
};
/* Designed to be compatible with linux's struct i2c_msg */
struct iic_msg
{
uint16_t slave;
uint16_t flags;
#define IIC_M_RD 0x0001 /* read vs write */
uint16_t len; /* msg legnth */
uint8_t * buf;
};
struct iic_rdwr_data {
struct iic_msg *msgs;
uint32_t nmsgs;
};
.Ed
.Pp
It is also possible to use read/write routines, then I2C start/stop handshake is
managed by the
.Xr iicbus 4
system.
However, the address used for the read/write routines is the one
passed to last
.Dv I2CSTART
.Xr ioctl 2
to this device.
.Sh SEE ALSO
.Xr ioctl 2 ,
.Xr read 2 ,
.Xr write 2 ,
.Xr iicbus 4
.Sh HISTORY
The
.Nm
manual page first appeared in
.Fx 3.0 .
.Sh AUTHORS
.An -nosplit
This
manual page was written by
.An Nicolas Souchu
and
.An M. Warner Losh .
.Sh BUGS
Only the
.Dv I2CRDWR
.Xr ioctl 2
is thread safe.
All other interfaces suffer from some kind of race.