6d09e4f1a8
As of r178766 this driver didn't compile anymore, because it missed a switch()-statement. I'm getting tired of seeing this driver being broken for two months already. When I run `make universe', everything passes, except the BWCT kernel configuration file.
688 lines
18 KiB
C
688 lines
18 KiB
C
/*-
|
|
* Copyright (c) 2005 M. Warner Losh
|
|
* Copyright (c) 2005 Olivier Houchard
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_comconsole.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/tty.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/uart/uart.h>
|
|
#include <dev/uart/uart_cpu.h>
|
|
#include <dev/uart/uart_bus.h>
|
|
#include <arm/at91/at91rm92reg.h>
|
|
#include <arm/at91/at91_usartreg.h>
|
|
#include <arm/at91/at91_pdcreg.h>
|
|
|
|
#include "uart_if.h"
|
|
|
|
#define DEFAULT_RCLK AT91C_MASTER_CLOCK
|
|
#define USART_BUFFER_SIZE 128
|
|
|
|
/*
|
|
* High-level UART interface.
|
|
*/
|
|
struct at91_usart_rx {
|
|
bus_addr_t pa;
|
|
uint8_t buffer[USART_BUFFER_SIZE];
|
|
bus_dmamap_t map;
|
|
};
|
|
|
|
struct at91_usart_softc {
|
|
struct uart_softc base;
|
|
bus_dma_tag_t dmatag; /* bus dma tag for mbufs */
|
|
bus_dmamap_t tx_map;
|
|
uint32_t flags;
|
|
#define HAS_TIMEOUT 1
|
|
struct at91_usart_rx ping_pong[2];
|
|
struct at91_usart_rx *ping;
|
|
struct at91_usart_rx *pong;
|
|
};
|
|
|
|
#define RD4(bas, reg) \
|
|
bus_space_read_4((bas)->bst, (bas)->bsh, uart_regofs(bas, reg))
|
|
#define WR4(bas, reg, value) \
|
|
bus_space_write_4((bas)->bst, (bas)->bsh, uart_regofs(bas, reg), value)
|
|
|
|
#define SIGCHG(c, i, s, d) \
|
|
do { \
|
|
if (c) { \
|
|
i |= (i & s) ? s : s | d; \
|
|
} else { \
|
|
i = (i & s) ? (i & ~s) | d : i; \
|
|
} \
|
|
} while (0);
|
|
|
|
#define BAUD2DIVISOR(b) \
|
|
((((DEFAULT_RCLK * 10) / ((b) * 16)) + 5) / 10)
|
|
|
|
/*
|
|
* Low-level UART interface.
|
|
*/
|
|
static int at91_usart_probe(struct uart_bas *bas);
|
|
static void at91_usart_init(struct uart_bas *bas, int, int, int, int);
|
|
static void at91_usart_term(struct uart_bas *bas);
|
|
static void at91_usart_putc(struct uart_bas *bas, int);
|
|
static int at91_usart_rxready(struct uart_bas *bas);
|
|
static int at91_usart_getc(struct uart_bas *bas, struct mtx *mtx);
|
|
|
|
extern SLIST_HEAD(uart_devinfo_list, uart_devinfo) uart_sysdevs;
|
|
|
|
static int
|
|
at91_usart_param(struct uart_bas *bas, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
uint32_t mr;
|
|
|
|
/*
|
|
* Assume 3-write RS-232 configuration.
|
|
* XXX Not sure how uart will present the other modes to us, so
|
|
* XXX they are unimplemented. maybe ioctl?
|
|
*/
|
|
mr = USART_MR_MODE_NORMAL;
|
|
mr |= USART_MR_USCLKS_MCK; /* Assume MCK */
|
|
|
|
/*
|
|
* Or in the databits requested
|
|
*/
|
|
if (databits < 9)
|
|
mr &= ~USART_MR_MODE9;
|
|
switch (databits) {
|
|
case 5:
|
|
mr |= USART_MR_CHRL_5BITS;
|
|
break;
|
|
case 6:
|
|
mr |= USART_MR_CHRL_6BITS;
|
|
break;
|
|
case 7:
|
|
mr |= USART_MR_CHRL_7BITS;
|
|
break;
|
|
case 8:
|
|
mr |= USART_MR_CHRL_8BITS;
|
|
break;
|
|
case 9:
|
|
mr |= USART_MR_CHRL_8BITS | USART_MR_MODE9;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
/*
|
|
* Or in the parity
|
|
*/
|
|
switch (parity) {
|
|
case UART_PARITY_NONE:
|
|
mr |= USART_MR_PAR_NONE;
|
|
break;
|
|
case UART_PARITY_ODD:
|
|
mr |= USART_MR_PAR_ODD;
|
|
break;
|
|
case UART_PARITY_EVEN:
|
|
mr |= USART_MR_PAR_EVEN;
|
|
break;
|
|
case UART_PARITY_MARK:
|
|
mr |= USART_MR_PAR_MARK;
|
|
break;
|
|
case UART_PARITY_SPACE:
|
|
mr |= USART_MR_PAR_SPACE;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
/*
|
|
* Or in the stop bits. Note: The hardware supports 1.5 stop
|
|
* bits in async mode, but there's no way to specify that
|
|
* AFAICT. Instead, rely on the convention documented at
|
|
* http://www.lammertbies.nl/comm/info/RS-232_specs.html which
|
|
* states that 1.5 stop bits are used for 5 bit bytes and
|
|
* 2 stop bits only for longer bytes.
|
|
*/
|
|
if (stopbits == 1)
|
|
mr |= USART_MR_NBSTOP_1;
|
|
else if (databits > 5)
|
|
mr |= USART_MR_NBSTOP_2;
|
|
else
|
|
mr |= USART_MR_NBSTOP_1_5;
|
|
|
|
/*
|
|
* We want normal plumbing mode too, none of this fancy
|
|
* loopback or echo mode.
|
|
*/
|
|
mr |= USART_MR_CHMODE_NORMAL;
|
|
|
|
mr &= ~USART_MR_MSBF; /* lsb first */
|
|
mr &= ~USART_MR_CKLO_SCK; /* Don't drive SCK */
|
|
|
|
WR4(bas, USART_MR, mr);
|
|
|
|
/*
|
|
* Set the baud rate
|
|
*/
|
|
WR4(bas, USART_BRGR, BAUD2DIVISOR(baudrate));
|
|
|
|
/* XXX Need to take possible synchronous mode into account */
|
|
return (0);
|
|
}
|
|
|
|
static struct uart_ops at91_usart_ops = {
|
|
.probe = at91_usart_probe,
|
|
.init = at91_usart_init,
|
|
.term = at91_usart_term,
|
|
.putc = at91_usart_putc,
|
|
.rxready = at91_usart_rxready,
|
|
.getc = at91_usart_getc,
|
|
};
|
|
|
|
static int
|
|
at91_usart_probe(struct uart_bas *bas)
|
|
{
|
|
/* We know that this is always here */
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Initialize this device for use as a console.
|
|
*/
|
|
static void
|
|
at91_usart_init(struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
|
|
at91_usart_param(bas, baudrate, databits, stopbits, parity);
|
|
|
|
/* Reset the rx and tx buffers and turn on rx and tx */
|
|
WR4(bas, USART_CR, USART_CR_RSTSTA | USART_CR_RSTRX | USART_CR_RSTTX);
|
|
WR4(bas, USART_CR, USART_CR_RXEN | USART_CR_TXEN);
|
|
WR4(bas, USART_IDR, 0xffffffff);
|
|
}
|
|
|
|
/*
|
|
* Free resources now that we're no longer the console. This appears to
|
|
* be never called, and I'm unsure quite what to do if I am called.
|
|
*/
|
|
static void
|
|
at91_usart_term(struct uart_bas *bas)
|
|
{
|
|
/* XXX */
|
|
}
|
|
|
|
/*
|
|
* Put a character of console output (so we do it here polling rather than
|
|
* interrutp driven).
|
|
*/
|
|
static void
|
|
at91_usart_putc(struct uart_bas *bas, int c)
|
|
{
|
|
|
|
while (!(RD4(bas, USART_CSR) & USART_CSR_TXRDY))
|
|
continue;
|
|
WR4(bas, USART_THR, c);
|
|
}
|
|
|
|
/*
|
|
* Check for a character available.
|
|
*/
|
|
static int
|
|
at91_usart_rxready(struct uart_bas *bas)
|
|
{
|
|
|
|
return ((RD4(bas, USART_CSR) & USART_CSR_RXRDY) != 0 ? 1 : 0);
|
|
}
|
|
|
|
/*
|
|
* Block waiting for a character.
|
|
*/
|
|
static int
|
|
at91_usart_getc(struct uart_bas *bas, struct mtx *mtx)
|
|
{
|
|
int c;
|
|
|
|
while (!(RD4(bas, USART_CSR) & USART_CSR_RXRDY))
|
|
continue;
|
|
c = RD4(bas, USART_RHR);
|
|
c &= 0xff;
|
|
return (c);
|
|
}
|
|
|
|
static int at91_usart_bus_probe(struct uart_softc *sc);
|
|
static int at91_usart_bus_attach(struct uart_softc *sc);
|
|
static int at91_usart_bus_flush(struct uart_softc *, int);
|
|
static int at91_usart_bus_getsig(struct uart_softc *);
|
|
static int at91_usart_bus_ioctl(struct uart_softc *, int, intptr_t);
|
|
static int at91_usart_bus_ipend(struct uart_softc *);
|
|
static int at91_usart_bus_param(struct uart_softc *, int, int, int, int);
|
|
static int at91_usart_bus_receive(struct uart_softc *);
|
|
static int at91_usart_bus_setsig(struct uart_softc *, int);
|
|
static int at91_usart_bus_transmit(struct uart_softc *);
|
|
|
|
static kobj_method_t at91_usart_methods[] = {
|
|
KOBJMETHOD(uart_probe, at91_usart_bus_probe),
|
|
KOBJMETHOD(uart_attach, at91_usart_bus_attach),
|
|
KOBJMETHOD(uart_flush, at91_usart_bus_flush),
|
|
KOBJMETHOD(uart_getsig, at91_usart_bus_getsig),
|
|
KOBJMETHOD(uart_ioctl, at91_usart_bus_ioctl),
|
|
KOBJMETHOD(uart_ipend, at91_usart_bus_ipend),
|
|
KOBJMETHOD(uart_param, at91_usart_bus_param),
|
|
KOBJMETHOD(uart_receive, at91_usart_bus_receive),
|
|
KOBJMETHOD(uart_setsig, at91_usart_bus_setsig),
|
|
KOBJMETHOD(uart_transmit, at91_usart_bus_transmit),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
int
|
|
at91_usart_bus_probe(struct uart_softc *sc)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
#ifndef SKYEYE_WORKAROUNDS
|
|
static void
|
|
at91_getaddr(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
|
|
{
|
|
if (error != 0)
|
|
return;
|
|
*(bus_addr_t *)arg = segs[0].ds_addr;
|
|
}
|
|
#endif
|
|
|
|
static int
|
|
at91_usart_bus_attach(struct uart_softc *sc)
|
|
{
|
|
#ifndef SKYEYE_WORKAROUNDS
|
|
int err;
|
|
int i;
|
|
#endif
|
|
uint32_t cr;
|
|
struct at91_usart_softc *atsc;
|
|
|
|
atsc = (struct at91_usart_softc *)sc;
|
|
|
|
/*
|
|
* See if we have a TIMEOUT bit. We disable all interrupts as
|
|
* a side effect. Boot loaders may have enabled them. Since
|
|
* a TIMEOUT interrupt can't happen without other setup, the
|
|
* apparent race here can't actually happen.
|
|
*/
|
|
WR4(&sc->sc_bas, USART_IDR, 0xffffffff);
|
|
WR4(&sc->sc_bas, USART_IER, USART_CSR_TIMEOUT);
|
|
if (RD4(&sc->sc_bas, USART_IMR) & USART_CSR_TIMEOUT)
|
|
atsc->flags |= HAS_TIMEOUT;
|
|
WR4(&sc->sc_bas, USART_IDR, 0xffffffff);
|
|
|
|
sc->sc_txfifosz = USART_BUFFER_SIZE;
|
|
sc->sc_rxfifosz = USART_BUFFER_SIZE;
|
|
sc->sc_hwiflow = 0;
|
|
|
|
#ifndef SKYEYE_WORKAROUNDS
|
|
/*
|
|
* Allocate DMA tags and maps
|
|
*/
|
|
err = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
|
|
BUS_SPACE_MAXADDR, NULL, NULL, USART_BUFFER_SIZE, 1,
|
|
USART_BUFFER_SIZE, BUS_DMA_ALLOCNOW, NULL, NULL, &atsc->dmatag);
|
|
if (err != 0)
|
|
goto errout;
|
|
err = bus_dmamap_create(atsc->dmatag, 0, &atsc->tx_map);
|
|
if (err != 0)
|
|
goto errout;
|
|
if (atsc->flags & HAS_TIMEOUT) {
|
|
for (i = 0; i < 2; i++) {
|
|
err = bus_dmamap_create(atsc->dmatag, 0,
|
|
&atsc->ping_pong[i].map);
|
|
if (err != 0)
|
|
goto errout;
|
|
err = bus_dmamap_load(atsc->dmatag,
|
|
atsc->ping_pong[i].map,
|
|
atsc->ping_pong[i].buffer, sc->sc_rxfifosz,
|
|
at91_getaddr, &atsc->ping_pong[i].pa, 0);
|
|
if (err != 0)
|
|
goto errout;
|
|
bus_dmamap_sync(atsc->dmatag, atsc->ping_pong[i].map,
|
|
BUS_DMASYNC_PREREAD);
|
|
}
|
|
atsc->ping = &atsc->ping_pong[0];
|
|
atsc->pong = &atsc->ping_pong[1];
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Prime the pump with the RX buffer. We use two 64 byte bounce
|
|
* buffers here to avoid data overflow.
|
|
*/
|
|
|
|
/* Turn on rx and tx */
|
|
cr = USART_CR_RSTSTA | USART_CR_RSTRX | USART_CR_RSTTX;
|
|
WR4(&sc->sc_bas, USART_CR, cr);
|
|
WR4(&sc->sc_bas, USART_CR, USART_CR_RXEN | USART_CR_TXEN);
|
|
|
|
/*
|
|
* Setup the PDC to receive data. We use the ping-pong buffers
|
|
* so that we can more easily bounce between the two and so that
|
|
* we get an interrupt 1/2 way through the software 'fifo' we have
|
|
* to avoid overruns.
|
|
*/
|
|
if (atsc->flags & HAS_TIMEOUT) {
|
|
WR4(&sc->sc_bas, PDC_RPR, atsc->ping->pa);
|
|
WR4(&sc->sc_bas, PDC_RCR, sc->sc_rxfifosz);
|
|
WR4(&sc->sc_bas, PDC_RNPR, atsc->pong->pa);
|
|
WR4(&sc->sc_bas, PDC_RNCR, sc->sc_rxfifosz);
|
|
WR4(&sc->sc_bas, PDC_PTCR, PDC_PTCR_RXTEN);
|
|
|
|
/* Set the receive timeout to be 1.5 character times. */
|
|
WR4(&sc->sc_bas, USART_RTOR, 12);
|
|
WR4(&sc->sc_bas, USART_CR, USART_CR_STTTO);
|
|
WR4(&sc->sc_bas, USART_IER, USART_CSR_TIMEOUT |
|
|
USART_CSR_RXBUFF | USART_CSR_ENDRX);
|
|
} else {
|
|
WR4(&sc->sc_bas, USART_IER, USART_CSR_RXRDY);
|
|
}
|
|
WR4(&sc->sc_bas, USART_IER, USART_CSR_RXBRK);
|
|
#ifndef SKYEYE_WORKAROUNDS
|
|
errout:;
|
|
// XXX bad
|
|
return (err);
|
|
#else
|
|
return (0);
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
at91_usart_bus_transmit(struct uart_softc *sc)
|
|
{
|
|
#ifndef SKYEYE_WORKAROUNDS
|
|
bus_addr_t addr;
|
|
#endif
|
|
struct at91_usart_softc *atsc;
|
|
|
|
atsc = (struct at91_usart_softc *)sc;
|
|
#ifndef SKYEYE_WORKAROUNDS
|
|
if (bus_dmamap_load(atsc->dmatag, atsc->tx_map, sc->sc_txbuf,
|
|
sc->sc_txdatasz, at91_getaddr, &addr, 0) != 0)
|
|
return (EAGAIN);
|
|
bus_dmamap_sync(atsc->dmatag, atsc->tx_map, BUS_DMASYNC_PREWRITE);
|
|
#endif
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
sc->sc_txbusy = 1;
|
|
#ifndef SKYEYE_WORKAROUNDS
|
|
/*
|
|
* Setup the PDC to transfer the data and interrupt us when it
|
|
* is done. We've already requested the interrupt.
|
|
*/
|
|
WR4(&sc->sc_bas, PDC_TPR, addr);
|
|
WR4(&sc->sc_bas, PDC_TCR, sc->sc_txdatasz);
|
|
WR4(&sc->sc_bas, PDC_PTCR, PDC_PTCR_TXTEN);
|
|
WR4(&sc->sc_bas, USART_IER, USART_CSR_ENDTX);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
#else
|
|
for (int i = 0; i < sc->sc_txdatasz; i++)
|
|
at91_usart_putc(&sc->sc_bas, sc->sc_txbuf[i]);
|
|
/*
|
|
* XXX: Gross hack : Skyeye doesn't raise an interrupt once the
|
|
* transfer is done, so simulate it.
|
|
*/
|
|
WR4(&sc->sc_bas, USART_IER, USART_CSR_TXRDY);
|
|
#endif
|
|
return (0);
|
|
}
|
|
static int
|
|
at91_usart_bus_setsig(struct uart_softc *sc, int sig)
|
|
{
|
|
uint32_t new, old, cr;
|
|
struct uart_bas *bas;
|
|
|
|
do {
|
|
old = sc->sc_hwsig;
|
|
new = old;
|
|
if (sig & SER_DDTR)
|
|
SIGCHG(sig & SER_DTR, new, SER_DTR, SER_DDTR);
|
|
if (sig & SER_DRTS)
|
|
SIGCHG(sig & SER_RTS, new, SER_RTS, SER_DRTS);
|
|
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
cr = 0;
|
|
if (new & SER_DTR)
|
|
cr |= USART_CR_DTREN;
|
|
else
|
|
cr |= USART_CR_DTRDIS;
|
|
if (new & SER_RTS)
|
|
cr |= USART_CR_RTSEN;
|
|
else
|
|
cr |= USART_CR_RTSDIS;
|
|
WR4(bas, USART_CR, cr);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (0);
|
|
}
|
|
static int
|
|
at91_usart_bus_receive(struct uart_softc *sc)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
static int
|
|
at91_usart_bus_param(struct uart_softc *sc, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
|
|
return (at91_usart_param(&sc->sc_bas, baudrate, databits, stopbits,
|
|
parity));
|
|
}
|
|
|
|
static __inline void
|
|
at91_rx_put(struct uart_softc *sc, int key)
|
|
{
|
|
#if defined(KDB) && defined(ALT_BREAK_TO_DEBUGGER)
|
|
int kdb_brk;
|
|
|
|
if (sc->sc_sysdev != NULL && sc->sc_sysdev->type == UART_DEV_CONSOLE) {
|
|
if ((kdb_brk = kdb_alt_break(key, &sc->sc_altbrk)) != 0) {
|
|
switch (kdb_brk) {
|
|
case KDB_REQ_DEBUGGER:
|
|
kdb_enter(KDB_WHY_BREAK,
|
|
"Break sequence on console");
|
|
break;
|
|
case KDB_REQ_PANIC:
|
|
kdb_panic("Panic sequence on console");
|
|
break;
|
|
case KDB_REQ_REBOOT:
|
|
kdb_reboot();
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
uart_rx_put(sc, key);
|
|
}
|
|
|
|
static int
|
|
at91_usart_bus_ipend(struct uart_softc *sc)
|
|
{
|
|
int csr = RD4(&sc->sc_bas, USART_CSR);
|
|
int ipend = 0, i, len;
|
|
struct at91_usart_softc *atsc;
|
|
struct at91_usart_rx *p;
|
|
|
|
atsc = (struct at91_usart_softc *)sc;
|
|
if (csr & USART_CSR_ENDTX) {
|
|
bus_dmamap_sync(atsc->dmatag, atsc->tx_map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(atsc->dmatag, atsc->tx_map);
|
|
}
|
|
uart_lock(sc->sc_hwmtx);
|
|
if (csr & USART_CSR_TXRDY) {
|
|
if (sc->sc_txbusy)
|
|
ipend |= SER_INT_TXIDLE;
|
|
WR4(&sc->sc_bas, USART_IDR, USART_CSR_TXRDY);
|
|
}
|
|
if (csr & USART_CSR_ENDTX) {
|
|
if (sc->sc_txbusy)
|
|
ipend |= SER_INT_TXIDLE;
|
|
WR4(&sc->sc_bas, USART_IDR, USART_CSR_ENDTX);
|
|
}
|
|
|
|
/*
|
|
* Due to the contraints of the DMA engine present in the
|
|
* atmel chip, I can't just say I have a rx interrupt pending
|
|
* and do all the work elsewhere. I need to look at the CSR
|
|
* bits right now and do things based on them to avoid races.
|
|
*/
|
|
if ((atsc->flags & HAS_TIMEOUT) && (csr & USART_CSR_RXBUFF)) {
|
|
// Have a buffer overflow. Copy all data from both
|
|
// ping and pong. Insert overflow character. Reset
|
|
// ping and pong and re-enable the PDC to receive
|
|
// characters again.
|
|
bus_dmamap_sync(atsc->dmatag, atsc->ping->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_sync(atsc->dmatag, atsc->pong->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
for (i = 0; i < sc->sc_rxfifosz; i++)
|
|
at91_rx_put(sc, atsc->ping->buffer[i]);
|
|
for (i = 0; i < sc->sc_rxfifosz; i++)
|
|
at91_rx_put(sc, atsc->pong->buffer[i]);
|
|
uart_rx_put(sc, UART_STAT_OVERRUN);
|
|
csr &= ~(USART_CSR_ENDRX | USART_CSR_TIMEOUT);
|
|
WR4(&sc->sc_bas, PDC_RPR, atsc->ping->pa);
|
|
WR4(&sc->sc_bas, PDC_RCR, sc->sc_rxfifosz);
|
|
WR4(&sc->sc_bas, PDC_RNPR, atsc->pong->pa);
|
|
WR4(&sc->sc_bas, PDC_RNCR, sc->sc_rxfifosz);
|
|
WR4(&sc->sc_bas, PDC_PTCR, PDC_PTCR_RXTEN);
|
|
ipend |= SER_INT_RXREADY;
|
|
}
|
|
if ((atsc->flags & HAS_TIMEOUT) && (csr & USART_CSR_ENDRX)) {
|
|
// Shuffle data from 'ping' of ping pong buffer, but
|
|
// leave current 'pong' in place, as it has become the
|
|
// new 'ping'. We need to copy data and setup the old
|
|
// 'ping' as the new 'pong' when we're done.
|
|
bus_dmamap_sync(atsc->dmatag, atsc->ping->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
for (i = 0; i < sc->sc_rxfifosz; i++)
|
|
at91_rx_put(sc, atsc->ping->buffer[i]);
|
|
p = atsc->ping;
|
|
atsc->ping = atsc->pong;
|
|
atsc->pong = p;
|
|
WR4(&sc->sc_bas, PDC_RNPR, atsc->pong->pa);
|
|
WR4(&sc->sc_bas, PDC_RNCR, sc->sc_rxfifosz);
|
|
ipend |= SER_INT_RXREADY;
|
|
}
|
|
if ((atsc->flags & HAS_TIMEOUT) && (csr & USART_CSR_TIMEOUT)) {
|
|
// We have one partial buffer. We need to stop the
|
|
// PDC, get the number of characters left and from
|
|
// that compute number of valid characters. We then
|
|
// need to reset ping and pong and reenable the PDC.
|
|
// Not sure if there's a race here at fast baud rates
|
|
// we need to worry about.
|
|
WR4(&sc->sc_bas, PDC_PTCR, PDC_PTCR_RXTDIS);
|
|
bus_dmamap_sync(atsc->dmatag, atsc->ping->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
len = sc->sc_rxfifosz - RD4(&sc->sc_bas, PDC_RCR);
|
|
for (i = 0; i < len; i++)
|
|
at91_rx_put(sc, atsc->ping->buffer[i]);
|
|
WR4(&sc->sc_bas, PDC_RPR, atsc->ping->pa);
|
|
WR4(&sc->sc_bas, PDC_RCR, sc->sc_rxfifosz);
|
|
WR4(&sc->sc_bas, USART_CR, USART_CR_STTTO);
|
|
WR4(&sc->sc_bas, PDC_PTCR, PDC_PTCR_RXTEN);
|
|
ipend |= SER_INT_RXREADY;
|
|
}
|
|
if (!(atsc->flags & HAS_TIMEOUT) && (csr & USART_CSR_RXRDY)) {
|
|
// We have another charater in a device that doesn't support
|
|
// timeouts, so we do it one character at a time.
|
|
at91_rx_put(sc, RD4(&sc->sc_bas, USART_RHR) & 0xff);
|
|
ipend |= SER_INT_RXREADY;
|
|
}
|
|
|
|
if (csr & USART_CSR_RXBRK) {
|
|
unsigned int cr = USART_CR_RSTSTA;
|
|
|
|
ipend |= SER_INT_BREAK;
|
|
WR4(&sc->sc_bas, USART_CR, cr);
|
|
}
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (ipend);
|
|
}
|
|
static int
|
|
at91_usart_bus_flush(struct uart_softc *sc, int what)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
at91_usart_bus_getsig(struct uart_softc *sc)
|
|
{
|
|
uint32_t new, sig;
|
|
uint8_t csr;
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
csr = RD4(&sc->sc_bas, USART_CSR);
|
|
sig = 0;
|
|
if (csr & USART_CSR_CTS)
|
|
sig |= SER_CTS;
|
|
if (csr & USART_CSR_DCD)
|
|
sig |= SER_DCD;
|
|
if (csr & USART_CSR_DSR)
|
|
sig |= SER_DSR;
|
|
if (csr & USART_CSR_RI)
|
|
sig |= SER_RI;
|
|
new = sig & ~SER_MASK_DELTA;
|
|
sc->sc_hwsig = new;
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (sig);
|
|
}
|
|
|
|
static int
|
|
at91_usart_bus_ioctl(struct uart_softc *sc, int request, intptr_t data)
|
|
{
|
|
switch (request) {
|
|
case UART_IOCTL_BREAK:
|
|
case UART_IOCTL_IFLOW:
|
|
case UART_IOCTL_OFLOW:
|
|
break;
|
|
case UART_IOCTL_BAUD:
|
|
WR4(&sc->sc_bas, USART_BRGR, BAUD2DIVISOR(*(int *)data));
|
|
return (0);
|
|
}
|
|
return (EINVAL);
|
|
}
|
|
|
|
struct uart_class at91_usart_class = {
|
|
"at91_usart",
|
|
at91_usart_methods,
|
|
sizeof(struct at91_usart_softc),
|
|
.uc_ops = &at91_usart_ops,
|
|
.uc_range = 8,
|
|
.uc_rclk = DEFAULT_RCLK
|
|
};
|