freebsd-nq/sys/net80211
Adrian Chadd 8a3860d5b4 Extend the radiotap code to be aware of the size of any extra vendor
bitmaps that may occur.

The way this works is:

* the beginning of the radiotap frame has a 32 bit "radiotap" namespace
  bitmap;
* if the vendor bitmap bit is set, then the next bitmap will be interpreted
  as a vendor bitmap;
* this can keep going on and on (ie, more vendor and radiotap namespace
  bitmaps can be added) until the last bitmap with no "more bitmaps" set.

Now, the radiotap code gets its grubby fingers into the supplied
radiotap rx/tx buffer and replaces the channel configuration
for each frame.  I don't know why it's not up to the drivers themselves
to do this, but I digress.  So, if a vendor bitmap (or two, etc) exists,
the offset calculations will be all completely wrong.

This particular patch introduces ieee80211_radiotap_attachv(), which
includes the number of vendor bitmaps (well, any other bitmaps, vendor
or otherwise) between the end of the bitmap/header and the start of the
actual radiotap field entries.  This makes the radiotap calculations
"right", so it correctly calculates where to overwrite the channel
configuration.

The long term fix is to go through and make each driver update the channel
configuration, as some of the fields are already being updated.

That, however, is a longer term fix that will need each driver fixed.

I leave that as an exercise to someone in the future.
2012-06-18 02:08:04 +00:00
..
_ieee80211.h Revert r220907 and r220915. 2011-04-22 00:44:27 +00:00
ieee80211_acl.c Remove now redundant mac argument. 2011-12-17 10:32:31 +00:00
ieee80211_action.c Added Self-protected action category (including MPM). 2012-05-01 15:35:10 +00:00
ieee80211_action.h Revamp 802.11 action frame handling: 2009-07-05 17:59:19 +00:00
ieee80211_adhoc.c Fix some corner cases in the net80211 sequence number retransmission 2011-05-04 02:23:59 +00:00
ieee80211_adhoc.h
ieee80211_ageq.c Fix memset sizeofs 2011-07-07 15:41:40 +00:00
ieee80211_ageq.h
ieee80211_alq.c Re-commit this - store the alq payload in network order. 2012-03-21 03:19:50 +00:00
ieee80211_alq.h .. revert out a local change that I hadn't yet completely finished fleshing 2012-03-18 21:54:59 +00:00
ieee80211_amrr.c sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly. 2011-01-12 19:53:50 +00:00
ieee80211_amrr.h net80211 rate control framework (net80211 ratectl). 2010-04-07 15:29:13 +00:00
ieee80211_crypto_ccmp.c - Introduce IEEE80211_KEY_NOREPLAY, a per-key flag to ignore replay 2010-07-01 20:50:12 +00:00
ieee80211_crypto_none.c Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
ieee80211_crypto_tkip.c - Introduce IEEE80211_KEY_NOREPLAY, a per-key flag to ignore replay 2010-07-01 20:50:12 +00:00
ieee80211_crypto_wep.c convert MALLOC/FREE to malloc/free 2008-12-18 23:00:09 +00:00
ieee80211_crypto.c Correct handling of keys that already have a hardware/device key index: 2009-07-21 19:36:32 +00:00
ieee80211_crypto.h - Introduce IEEE80211_KEY_NOREPLAY, a per-key flag to ignore replay 2010-07-01 20:50:12 +00:00
ieee80211_ddb.c Implemented so that Mesh forwarding information lifetime is dynamic. 2012-05-01 15:47:30 +00:00
ieee80211_dfs.c Add a DFS debugging mode which is useful when doing automated DFS 2012-01-31 00:03:49 +00:00
ieee80211_dfs.h Add a DFS debugging mode which is useful when doing automated DFS 2012-01-31 00:03:49 +00:00
ieee80211_freebsd.c Correct the ordering of tid/crypto ic_name. 2012-03-27 04:15:38 +00:00
ieee80211_freebsd.h Make this code a little more portable by wrapping the mtx calls into 2010-04-14 18:29:40 +00:00
ieee80211_hostap.c Remove now redundant mac argument. 2011-12-17 10:32:31 +00:00
ieee80211_hostap.h Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
ieee80211_ht.c Fix some corner cases in the ieee80211_send_bar() handling. 2012-05-22 19:37:12 +00:00
ieee80211_ht.h Migrate the net80211 TX aggregation state to be from per-AC to per-TID. 2012-04-15 20:29:39 +00:00
ieee80211_hwmp.c Update HWMP Proactive code and mesh route flags. 2012-05-01 16:18:38 +00:00
ieee80211_input.c Added Self-protected action category (including MPM). 2012-05-01 15:35:10 +00:00
ieee80211_input.h Fix some corner cases in the net80211 sequence number retransmission 2011-05-04 02:23:59 +00:00
ieee80211_ioctl.c Add the ability to kick an existing mesh node without waiting for it 2012-01-11 17:10:27 +00:00
ieee80211_ioctl.h PREQ discovery update. 2012-05-01 16:16:20 +00:00
ieee80211_mesh.c PREQ discovery update. 2012-05-01 16:16:20 +00:00
ieee80211_mesh.h PREQ discovery update. 2012-05-01 16:16:20 +00:00
ieee80211_monitor.c
ieee80211_monitor.h
ieee80211_node.c Create a new task to handle 802.11n channel width changes. 2012-03-25 03:11:57 +00:00
ieee80211_node.h Migrate the net80211 TX aggregation state to be from per-AC to per-TID. 2012-04-15 20:29:39 +00:00
ieee80211_output.c Mesh forwarding with proxy support. 2012-05-01 15:56:26 +00:00
ieee80211_phy.c
ieee80211_phy.h
ieee80211_power.c Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs. 2011-11-07 06:44:47 +00:00
ieee80211_power.h
ieee80211_proto.c Create a new task to handle 802.11n channel width changes. 2012-03-25 03:11:57 +00:00
ieee80211_proto.h Remove now redundant mac argument. 2011-12-17 10:32:31 +00:00
ieee80211_radiotap.c Extend the radiotap code to be aware of the size of any extra vendor 2012-06-18 02:08:04 +00:00
ieee80211_radiotap.h Add a radiotap vendor header definition. 2012-02-24 05:33:11 +00:00
ieee80211_ratectl_none.c Some device drivers calculate various timing related things based on 2010-11-13 14:59:54 +00:00
ieee80211_ratectl.c Instead of using the AMRR ratectl algo as default for drivers which have 2010-11-06 18:17:20 +00:00
ieee80211_ratectl.h The ni_rctls checks are used to verify that a ratectl algo has set up 2010-11-14 09:59:52 +00:00
ieee80211_regdomain.c Add basic HT channel setup to ieee80211_init_channels(), this will be 2012-04-03 17:48:42 +00:00
ieee80211_regdomain.h
ieee80211_rssadapt.c Remove GNU-style struct initialization. 2010-06-12 07:02:43 +00:00
ieee80211_rssadapt.h net80211 rate control framework (net80211 ratectl). 2010-04-07 15:29:13 +00:00
ieee80211_scan_sta.c When setting a fixed channel on adapters with 11n support the scan 2011-08-08 16:29:07 +00:00
ieee80211_scan.c Attempt to catch scan cancellations at exactly the wrong time from occuring. 2012-03-02 02:53:43 +00:00
ieee80211_scan.h Add 802.11h quiet time element support into net80211. 2011-11-08 04:00:24 +00:00
ieee80211_sta.c Create a new task to handle 802.11n channel width changes. 2012-03-25 03:11:57 +00:00
ieee80211_sta.h
ieee80211_superg.c Migrate the net80211 TX aggregation state to be from per-AC to per-TID. 2012-04-15 20:29:39 +00:00
ieee80211_superg.h
ieee80211_tdma.c Fix the situation where net80211 is built with IEEE80211_SUPPORT_TDMA but a module 2012-01-15 19:45:23 +00:00
ieee80211_tdma.h
ieee80211_var.h Extend the radiotap code to be aware of the size of any extra vendor 2012-06-18 02:08:04 +00:00
ieee80211_wds.c Fix some corner cases in the net80211 sequence number retransmission 2011-05-04 02:23:59 +00:00
ieee80211_wds.h
ieee80211_xauth.c Multi-bss (aka vap) support for 802.11 devices. 2008-04-20 20:35:46 +00:00
ieee80211.c Create a new task to handle 802.11n channel width changes. 2012-03-25 03:11:57 +00:00
ieee80211.h Net80211s update: Mesh Gate Announcement and removal of Portal Announcement. 2012-05-01 16:14:18 +00:00