be4aa869c1
14.00.00.01-fbsd. Their description of the changes is as follows: 1. Copyright contents has been changed in all respective .c and .h files 2. Support for WRITE12 and READ12 for direct-io (warpdrive only) has been added. 3. Driver has added checks to see if Drive has READ_CAP_16 support before sending it down to the device. If SPC3_SID_PROTECT flag is set in the inquiry data, the device supports protection information, and must support the 16 byte read capacity command, otherwise continue without sending read cap 16. This will optimize driver performance, since it will not send READ_CAP_16 to the drive which does not have support of READ_CAP_16. 4. With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not use DELAY() which is busy loop implementation. It will use <msleep> (Better way to sleep without busy loop). Also from the HBA reset code path and some other places, DELAY() is replaced with msleep() or "pause()", which is based on sleep/wakeup style calls. Driver use msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP flags to avoid busy loop which is not required all the time.e.a a. While driver is getting loaded, driver calls most of the commands with NO_SLEEP. b. When Driver is functional and it needs Reinit of HBA, CAN_SLEEP flag is used. 5. <mpslsi> driver is not Endian safe. It will not work on Big Endian machines like Sparc and PowerPC platforms because it assumes it is running on a Little Endian machine. Driver code is modified such way that it does not assume CPU arch is Little Endian. a. All places where Driver interacts from HBA to Host, it converts Little Endian format to CPU format. b. All places where Driver interacts from Host to HBA, it converts CPU format to Little Endian. 6. Findout memory leaks in FreeBSD Driver and resolve those, such as memory leak in targ's luns creation/deletion. Also added additional checks to see memory allocation success/fail. 7. Add loginfo prints as debug message, i.e. When FW sends any loginfo, Driver should print those as debug message. This will help for debugging purpose. 8. There is possibility to get config request timeout. Current driver is able to detect config request timetout, but it does not do anything on config_request timeout. Driver should call mps_reinit() if any request_poll (which is called as part of config_request) is time out. 9. cdb length check is required for 32 byte CDB. Add correct mpi control value for 32 bit CDB as below while submitting SCSI IO Request to controller. mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT; 10. Check the actual status of Message unit reset (mps_message_unit_reset).Previously FreeBSD Driver just writes MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack (it just wait for 50 millisecond). So, Driver now check the status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing it to the FW. Now it also checking for whether doorbell ack uses msleep with proper sleep flags, instead of <DELAY>. 11. Previously CAM does not detect Multi-Lun Devices. In order to detect Multi-Lun Devices by CAM the driver needs following change set: a. There is "max_lun" field which Driver need to set based on hw/fw support. Currently LSI released driver does not set this field. b. Default of "max_lun" should not be 0 in OS, but it is currently set to 0 in CAM layer. c. Export max_lun capacity to 255 12. Driver will not reset target info after port enable complete and also do Device removal when Device remove from FW. The detail description is as follows a. When Driver receive WD PD add events, it will add all information in driver local data structure. b. Only for WD, we have below checks after port enable completes, where driver clear off all information retrieved at #1. if ((sc->WD_available && (sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) || (sc->WD_valid_config && (sc->WD_hide_expose == MPS_WD_HIDE_IF_VOLUME)) { // clear off target data structure. } It is mainly not to attach PDs to OS. FreeBSD does bus rescan as older Parallel scsi style. So Driver needs to handle which Drive is visible to OS. That is a reason we have to clear off targ information for PDs. Again, above logic was implemented long time ago. Similar concept we have for non-wd also. For that, LSI have introduced different logic to hide PDs. Eventually, because of above gap, when Phy goes offline, we observe below failure. That is what Driver is not doing complete removal of device with FW. (which was pointed by Scott) Apr 5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove Apr 5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe Now Driver will not reset target info after port enable complete and also will do Device removal when Device remove from FW. 13. Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID" error code on request to the Target IDs that have no devices conected at that moment. As if "CAM_TID_INVALID" error code is returned to the CAM Layaer then it results in a huge chain of errors in verbose kernel messages on boot and every hot-plug event. Submitted by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> MFC after: 3 days
469 lines
23 KiB
C
469 lines
23 KiB
C
/*-
|
|
* Copyright (c) 2011, 2012 LSI Corp.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* LSI MPT-Fusion Host Adapter FreeBSD
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Copyright (c) 2000-2012 LSI Corporation.
|
|
*
|
|
*
|
|
* Name: mpi2_tool.h
|
|
* Title: MPI diagnostic tool structures and definitions
|
|
* Creation Date: March 26, 2007
|
|
*
|
|
* mpi2_tool.h Version: 02.00.06
|
|
*
|
|
* Version History
|
|
* ---------------
|
|
*
|
|
* Date Version Description
|
|
* -------- -------- ------------------------------------------------------
|
|
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
|
|
* 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
|
|
* structures and defines.
|
|
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
|
|
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
|
|
* 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
|
|
* and reply messages.
|
|
* Added MPI2_DIAG_BUF_TYPE_EXTENDED.
|
|
* Incremented MPI2_DIAG_BUF_TYPE_COUNT.
|
|
* 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
|
|
* 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
|
|
* Post Request.
|
|
* --------------------------------------------------------------------------
|
|
*/
|
|
|
|
#ifndef MPI2_TOOL_H
|
|
#define MPI2_TOOL_H
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* Toolbox Messages
|
|
*
|
|
*****************************************************************************/
|
|
|
|
/* defines for the Tools */
|
|
#define MPI2_TOOLBOX_CLEAN_TOOL (0x00)
|
|
#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
|
|
#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
|
|
#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
|
|
#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
|
|
#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
|
|
|
|
|
|
/****************************************************************************
|
|
* Toolbox reply
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_TOOLBOX_REPLY
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 MsgLength; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U16 Reserved5; /* 0x0C */
|
|
U16 IOCStatus; /* 0x0E */
|
|
U32 IOCLogInfo; /* 0x10 */
|
|
} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY,
|
|
Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t;
|
|
|
|
|
|
/****************************************************************************
|
|
* Toolbox Clean Tool request
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U32 Flags; /* 0x0C */
|
|
} MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
|
|
Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t;
|
|
|
|
/* values for the Flags field */
|
|
#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
|
|
#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
|
|
#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
|
|
#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
|
|
#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
|
|
#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
|
|
#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
|
|
#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
|
|
#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
|
|
#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
|
|
|
|
|
|
/****************************************************************************
|
|
* Toolbox Memory Move request
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
MPI2_SGE_SIMPLE_UNION SGL; /* 0x0C */
|
|
} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
|
|
Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t;
|
|
|
|
|
|
/****************************************************************************
|
|
* Toolbox Diagnostic Data Upload request
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U8 SGLFlags; /* 0x0C */
|
|
U8 Reserved5; /* 0x0D */
|
|
U16 Reserved6; /* 0x0E */
|
|
U32 Flags; /* 0x10 */
|
|
U32 DataLength; /* 0x14 */
|
|
MPI2_SGE_SIMPLE_UNION SGL; /* 0x18 */
|
|
} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
|
|
MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
|
|
Mpi2ToolboxDiagDataUploadRequest_t,
|
|
MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t;
|
|
|
|
/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
|
|
|
|
|
|
typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER
|
|
{
|
|
U32 DiagDataLength; /* 00h */
|
|
U8 FormatCode; /* 04h */
|
|
U8 Reserved1; /* 05h */
|
|
U16 Reserved2; /* 06h */
|
|
} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
|
|
Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t;
|
|
|
|
|
|
/****************************************************************************
|
|
* Toolbox ISTWI Read Write Tool
|
|
****************************************************************************/
|
|
|
|
/* Toolbox ISTWI Read Write Tool request message */
|
|
typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U32 Reserved5; /* 0x0C */
|
|
U32 Reserved6; /* 0x10 */
|
|
U8 DevIndex; /* 0x14 */
|
|
U8 Action; /* 0x15 */
|
|
U8 SGLFlags; /* 0x16 */
|
|
U8 Reserved7; /* 0x17 */
|
|
U16 TxDataLength; /* 0x18 */
|
|
U16 RxDataLength; /* 0x1A */
|
|
U32 Reserved8; /* 0x1C */
|
|
U32 Reserved9; /* 0x20 */
|
|
U32 Reserved10; /* 0x24 */
|
|
U32 Reserved11; /* 0x28 */
|
|
U32 Reserved12; /* 0x2C */
|
|
MPI2_SGE_SIMPLE_UNION SGL; /* 0x30 */
|
|
} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
|
|
MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
|
|
Mpi2ToolboxIstwiReadWriteRequest_t,
|
|
MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t;
|
|
|
|
/* values for the Action field */
|
|
#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01)
|
|
#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02)
|
|
#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03)
|
|
#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10)
|
|
#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11)
|
|
#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12)
|
|
|
|
/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
|
|
|
|
|
|
/* Toolbox ISTWI Read Write Tool reply message */
|
|
typedef struct _MPI2_TOOLBOX_ISTWI_REPLY
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 MsgLength; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U16 Reserved5; /* 0x0C */
|
|
U16 IOCStatus; /* 0x0E */
|
|
U32 IOCLogInfo; /* 0x10 */
|
|
U8 DevIndex; /* 0x14 */
|
|
U8 Action; /* 0x15 */
|
|
U8 IstwiStatus; /* 0x16 */
|
|
U8 Reserved6; /* 0x17 */
|
|
U16 TxDataCount; /* 0x18 */
|
|
U16 RxDataCount; /* 0x1A */
|
|
} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY,
|
|
Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t;
|
|
|
|
|
|
/****************************************************************************
|
|
* Toolbox Beacon Tool request
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_TOOLBOX_BEACON_REQUEST
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U8 Reserved5; /* 0x0C */
|
|
U8 PhysicalPort; /* 0x0D */
|
|
U8 Reserved6; /* 0x0E */
|
|
U8 Flags; /* 0x0F */
|
|
} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST,
|
|
Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t;
|
|
|
|
/* values for the Flags field */
|
|
#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00)
|
|
#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01)
|
|
|
|
|
|
/****************************************************************************
|
|
* Toolbox Diagnostic CLI Tool
|
|
****************************************************************************/
|
|
|
|
#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C)
|
|
|
|
/* Toolbox Diagnostic CLI Tool request message */
|
|
typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U8 SGLFlags; /* 0x0C */
|
|
U8 Reserved5; /* 0x0D */
|
|
U16 Reserved6; /* 0x0E */
|
|
U32 DataLength; /* 0x10 */
|
|
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */
|
|
MPI2_SGE_SIMPLE_UNION SGL; /* 0x70 */
|
|
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
|
|
MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
|
|
Mpi2ToolboxDiagnosticCliRequest_t,
|
|
MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
|
|
|
|
/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
|
|
|
|
|
|
/* Toolbox Diagnostic CLI Tool reply message */
|
|
typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY
|
|
{
|
|
U8 Tool; /* 0x00 */
|
|
U8 Reserved1; /* 0x01 */
|
|
U8 MsgLength; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U16 Reserved5; /* 0x0C */
|
|
U16 IOCStatus; /* 0x0E */
|
|
U32 IOCLogInfo; /* 0x10 */
|
|
U32 ReturnedDataLength; /* 0x14 */
|
|
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
|
|
MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
|
|
Mpi2ToolboxDiagnosticCliReply_t,
|
|
MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t;
|
|
|
|
|
|
/*****************************************************************************
|
|
*
|
|
* Diagnostic Buffer Messages
|
|
*
|
|
*****************************************************************************/
|
|
|
|
|
|
/****************************************************************************
|
|
* Diagnostic Buffer Post request
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST
|
|
{
|
|
U8 ExtendedType; /* 0x00 */
|
|
U8 BufferType; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U64 BufferAddress; /* 0x0C */
|
|
U32 BufferLength; /* 0x14 */
|
|
U32 Reserved5; /* 0x18 */
|
|
U32 Reserved6; /* 0x1C */
|
|
U32 Flags; /* 0x20 */
|
|
U32 ProductSpecific[23]; /* 0x24 */
|
|
} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
|
|
Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t;
|
|
|
|
/* values for the ExtendedType field */
|
|
#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02)
|
|
|
|
/* values for the BufferType field */
|
|
#define MPI2_DIAG_BUF_TYPE_TRACE (0x00)
|
|
#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01)
|
|
#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02)
|
|
/* count of the number of buffer types */
|
|
#define MPI2_DIAG_BUF_TYPE_COUNT (0x03)
|
|
|
|
/* values for the Flags field */
|
|
#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002)
|
|
#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001)
|
|
|
|
|
|
/****************************************************************************
|
|
* Diagnostic Buffer Post reply
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_DIAG_BUFFER_POST_REPLY
|
|
{
|
|
U8 ExtendedType; /* 0x00 */
|
|
U8 BufferType; /* 0x01 */
|
|
U8 MsgLength; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U16 Reserved5; /* 0x0C */
|
|
U16 IOCStatus; /* 0x0E */
|
|
U32 IOCLogInfo; /* 0x10 */
|
|
U32 TransferLength; /* 0x14 */
|
|
} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY,
|
|
Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t;
|
|
|
|
|
|
/****************************************************************************
|
|
* Diagnostic Release request
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_DIAG_RELEASE_REQUEST
|
|
{
|
|
U8 Reserved1; /* 0x00 */
|
|
U8 BufferType; /* 0x01 */
|
|
U8 ChainOffset; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST,
|
|
Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t;
|
|
|
|
|
|
/****************************************************************************
|
|
* Diagnostic Buffer Post reply
|
|
****************************************************************************/
|
|
|
|
typedef struct _MPI2_DIAG_RELEASE_REPLY
|
|
{
|
|
U8 Reserved1; /* 0x00 */
|
|
U8 BufferType; /* 0x01 */
|
|
U8 MsgLength; /* 0x02 */
|
|
U8 Function; /* 0x03 */
|
|
U16 Reserved2; /* 0x04 */
|
|
U8 Reserved3; /* 0x06 */
|
|
U8 MsgFlags; /* 0x07 */
|
|
U8 VP_ID; /* 0x08 */
|
|
U8 VF_ID; /* 0x09 */
|
|
U16 Reserved4; /* 0x0A */
|
|
U16 Reserved5; /* 0x0C */
|
|
U16 IOCStatus; /* 0x0E */
|
|
U32 IOCLogInfo; /* 0x10 */
|
|
} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY,
|
|
Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t;
|
|
|
|
|
|
#endif
|
|
|