freebsd-nq/sys/arm/at91/at91_smc.c
Pedro F. Giffuni af3dc4a7ca sys/arm: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:04:10 +00:00

94 lines
3.3 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2014 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <arm/at91/at91reg.h>
#include <arm/at91/at91_smc.h>
#include <arm/at91/at91sam9260reg.h>
/*
* RD4HW()/WR4HW() read and write at91 hardware register space directly. They
* serve the same purpose as the RD4()/WR4() idiom you see in many drivers,
* except that those translate to bus_space calls, but in this code we need to
* access some devices before bus_space is ready to use. Of course for this to
* work the appropriate static device mappings need to be made in machdep.c.
*/
static inline uint32_t
RD4HW(uint32_t devbase, uint32_t regoff)
{
return *(volatile uint32_t *)(AT91_BASE + devbase + regoff);
}
static inline void
WR4HW(uint32_t devbase, uint32_t regoff, uint32_t val)
{
*(volatile uint32_t *)(AT91_BASE + devbase + regoff) = val;
}
void
at91_smc_setup(int id, int cs, const struct at91_smc_init *smc)
{
// Need a generic way to get this address for all SoCs... Assume 9260 for now...
uint32_t base = AT91SAM9260_SMC_BASE + SMC_CS_OFF(cs);
WR4HW(base, SMC_SETUP, SMC_SETUP_NCS_RD_SETUP(smc->ncs_rd_setup) |
SMC_SETUP_NRD_SETUP(smc->nrd_setup) |
SMC_SETUP_NCS_WR_SETUP(smc->ncs_wr_setup) |
SMC_SETUP_NWE_SETUP(smc->nwe_setup));
WR4HW(base, SMC_PULSE, SMC_PULSE_NCS_RD_PULSE(smc->ncs_rd_pulse) |
SMC_PULSE_NRD_PULSE(smc->nrd_pulse) |
SMC_PULSE_NCS_WR_PULSE(smc->ncs_wr_pulse) |
SMC_PULSE_NWE_PULSE(smc->nwe_pulse));
WR4HW(base, SMC_CYCLE, SMC_CYCLE_NRD_CYCLE(smc->nrd_cycle) |
SMC_CYCLE_NWE_CYCLE(smc->nwe_cycle));
WR4HW(base, SMC_MODE, smc->mode | SMC_MODE_TDF_CYCLES(smc->tdf_cycles));
}
void
at91_ebi_enable(int bank)
{
WR4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA, (1 << bank) |
RD4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA));
}
void
at91_ebi_disable(int bank)
{
WR4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA, ~(1 << bank) &
RD4HW(AT91SAM9260_MATRIX_BASE, AT91SAM9260_EBICSA));
}