1491 lines
53 KiB
C
1491 lines
53 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2011 Cavium Inc. (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
|
|
* * Neither the name of Cavium Inc. nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
|
|
* This Software, including technical data, may be subject to U.S. export control
|
|
* laws, including the U.S. Export Administration Act and its associated
|
|
* regulations, and may be subject to export or import regulations in other
|
|
* countries.
|
|
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
|
|
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
|
|
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
|
|
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
|
|
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
|
|
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
|
|
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
|
|
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
|
|
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Helper functions to abstract board specific data about
|
|
* network ports from the rest of the cvmx-helper files.
|
|
*
|
|
* <hr>$Revision: 70030 $<hr>
|
|
*/
|
|
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
|
|
#include <linux/module.h>
|
|
#include <asm/octeon/cvmx.h>
|
|
#include <asm/octeon/cvmx-bootinfo.h>
|
|
#include <asm/octeon/cvmx-smix-defs.h>
|
|
#include <asm/octeon/cvmx-gmxx-defs.h>
|
|
#include <asm/octeon/cvmx-asxx-defs.h>
|
|
#include <asm/octeon/cvmx-mdio.h>
|
|
#include <asm/octeon/cvmx-helper.h>
|
|
#include <asm/octeon/cvmx-helper-util.h>
|
|
#include <asm/octeon/cvmx-helper-board.h>
|
|
#include <asm/octeon/cvmx-twsi.h>
|
|
#else
|
|
#include "cvmx.h"
|
|
#include "cvmx-app-init.h"
|
|
#include "cvmx-sysinfo.h"
|
|
#include "cvmx-twsi.h"
|
|
#include "cvmx-mdio.h"
|
|
#include "cvmx-helper.h"
|
|
#include "cvmx-helper-util.h"
|
|
#include "cvmx-helper-board.h"
|
|
#include "cvmx-gpio.h"
|
|
#if !defined(__FreeBSD__) || !defined(_KERNEL)
|
|
#ifdef __U_BOOT__
|
|
# include <libfdt.h>
|
|
#else
|
|
# include "libfdt/libfdt.h"
|
|
#endif
|
|
#endif
|
|
#include "cvmx-swap.h"
|
|
#endif
|
|
|
|
/**
|
|
* cvmx_override_board_link_get(int ipd_port) is a function
|
|
* pointer. It is meant to allow customization of the process of
|
|
* talking to a PHY to determine link speed. It is called every
|
|
* time a PHY must be polled for link status. Users should set
|
|
* this pointer to a function before calling any cvmx-helper
|
|
* operations.
|
|
*/
|
|
CVMX_SHARED cvmx_helper_link_info_t (*cvmx_override_board_link_get)(int ipd_port) = NULL;
|
|
|
|
#if !defined(CVMX_BUILD_FOR_LINUX_KERNEL) && (!defined(__FreeBSD__) || !defined(_KERNEL))
|
|
|
|
static void cvmx_retry_i2c_write(int twsi_id, uint8_t dev_addr, uint16_t internal_addr, int num_bytes, int ia_width_bytes, uint64_t data)
|
|
{
|
|
int tries = 3;
|
|
int r;
|
|
do {
|
|
r = cvmx_twsix_write_ia(twsi_id, dev_addr, internal_addr, num_bytes, ia_width_bytes, data);
|
|
} while (tries-- > 0 && r < 0);
|
|
}
|
|
|
|
static int __pip_eth_node(const void *fdt_addr, int aliases, int ipd_port)
|
|
{
|
|
char name_buffer[20];
|
|
const char*pip_path;
|
|
int pip, iface, eth;
|
|
int interface_num = cvmx_helper_get_interface_num(ipd_port);
|
|
int interface_index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
|
|
pip_path = fdt_getprop(fdt_addr, aliases, "pip", NULL);
|
|
if (!pip_path)
|
|
{
|
|
cvmx_dprintf("ERROR: pip path not found in device tree\n");
|
|
return -1;
|
|
}
|
|
pip = fdt_path_offset(fdt_addr, pip_path);
|
|
if (pip < 0)
|
|
{
|
|
cvmx_dprintf("ERROR: pip not found in device tree\n");
|
|
return -1;
|
|
}
|
|
#ifdef __U_BOOT__
|
|
sprintf(name_buffer, "interface@%d", interface_num);
|
|
#else
|
|
snprintf(name_buffer, sizeof(name_buffer), "interface@%d", interface_num);
|
|
#endif
|
|
iface = fdt_subnode_offset(fdt_addr, pip, name_buffer);
|
|
if (iface < 0)
|
|
{
|
|
cvmx_dprintf("ERROR : pip intf %d not found in device tree \n",
|
|
interface_num);
|
|
return -1;
|
|
}
|
|
#ifdef __U_BOOT__
|
|
sprintf(name_buffer, "ethernet@%x", interface_index);
|
|
#else
|
|
snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", interface_index);
|
|
#endif
|
|
eth = fdt_subnode_offset(fdt_addr, iface, name_buffer);
|
|
if (eth < 0)
|
|
{
|
|
cvmx_dprintf("ERROR : pip interface@%d ethernet@%d not found in device "
|
|
"tree\n", interface_num, interface_index);
|
|
return -1;
|
|
}
|
|
return eth;
|
|
}
|
|
|
|
static int __mix_eth_node(const void *fdt_addr, int aliases, int interface_index)
|
|
{
|
|
char name_buffer[20];
|
|
const char*mix_path;
|
|
int mix;
|
|
|
|
#ifdef __U_BOOT__
|
|
sprintf(name_buffer, "mix%d", interface_index);
|
|
#else
|
|
snprintf(name_buffer, sizeof(name_buffer), "mix%d", interface_index);
|
|
#endif
|
|
mix_path = fdt_getprop(fdt_addr, aliases, name_buffer, NULL);
|
|
if (!mix_path)
|
|
{
|
|
cvmx_dprintf("ERROR: mix%d path not found in device tree\n",interface_index);
|
|
}
|
|
mix = fdt_path_offset(fdt_addr, mix_path);
|
|
if (mix < 0)
|
|
{
|
|
cvmx_dprintf("ERROR: %s not found in device tree\n", mix_path);
|
|
return -1;
|
|
}
|
|
return mix;
|
|
}
|
|
|
|
typedef struct cvmx_phy_info
|
|
{
|
|
int phy_addr;
|
|
int direct_connect;
|
|
cvmx_phy_type_t phy_type;
|
|
}cvmx_phy_info_t;
|
|
|
|
|
|
static int __mdiobus_addr_to_unit(uint32_t addr)
|
|
{
|
|
int unit = (addr >> 7) & 3;
|
|
if (!OCTEON_IS_MODEL(OCTEON_CN68XX))
|
|
unit >>= 1;
|
|
return unit;
|
|
}
|
|
/**
|
|
* Return the MII PHY address associated with the given IPD
|
|
* port. The phy address is obtained from the device tree.
|
|
*
|
|
* @param ipd_port Octeon IPD port to get the MII address for.
|
|
*
|
|
* @return MII PHY address and bus number or -1.
|
|
*/
|
|
|
|
static cvmx_phy_info_t __get_phy_info_from_dt(int ipd_port)
|
|
{
|
|
const void *fdt_addr = CASTPTR(const void *, cvmx_sysinfo_get()->fdt_addr);
|
|
uint32_t *phy_handle;
|
|
int aliases, eth, phy, phy_parent, phandle, ret;
|
|
cvmx_phy_info_t phy_info;
|
|
int mdio_unit=-1;
|
|
const char *phy_comaptible_str;
|
|
uint32_t *phy_addr_ptr;
|
|
|
|
phy_info.phy_addr = -1;
|
|
phy_info.direct_connect = -1;
|
|
phy_info.phy_type = (cvmx_phy_type_t) -1;
|
|
|
|
if (!fdt_addr)
|
|
{
|
|
cvmx_dprintf("No device tree found.\n");
|
|
return phy_info;
|
|
}
|
|
aliases = fdt_path_offset(fdt_addr, "/aliases");
|
|
if (aliases < 0) {
|
|
cvmx_dprintf("Error: No /aliases node in device tree.\n");
|
|
return phy_info;
|
|
}
|
|
if (ipd_port < 0)
|
|
{
|
|
int interface_index = ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT;
|
|
eth = __mix_eth_node(fdt_addr, aliases, interface_index) ;
|
|
}
|
|
else
|
|
{
|
|
eth = __pip_eth_node(fdt_addr, aliases, ipd_port);
|
|
}
|
|
if (eth < 0 )
|
|
{
|
|
cvmx_dprintf("ERROR : cannot find interface for ipd_port=%d\n", ipd_port);
|
|
return phy_info;
|
|
}
|
|
/* Get handle to phy */
|
|
phy_handle = (uint32_t *) fdt_getprop(fdt_addr, eth, "phy-handle", NULL);
|
|
if (!phy_handle)
|
|
{
|
|
cvmx_dprintf("ERROR : phy handle not found in device tree ipd_port=%d"
|
|
"\n", ipd_port);
|
|
return phy_info;
|
|
}
|
|
phandle = cvmx_be32_to_cpu(*phy_handle);
|
|
phy = fdt_node_offset_by_phandle(fdt_addr, phandle);
|
|
if (phy < 0)
|
|
{
|
|
cvmx_dprintf("ERROR : cannot find phy for ipd_port=%d ret=%d\n",
|
|
ipd_port, phy);
|
|
return phy_info;
|
|
}
|
|
phy_comaptible_str = (const char *) fdt_getprop(fdt_addr, phy,
|
|
"compatible", NULL);
|
|
if (!phy_comaptible_str)
|
|
{
|
|
cvmx_dprintf("ERROR : no compatible prop in phy\n");
|
|
return phy_info;
|
|
}
|
|
if (memcmp("marvell", phy_comaptible_str, strlen("marvell")) == 0)
|
|
{
|
|
phy_info.phy_type = MARVELL_GENERIC_PHY;
|
|
}
|
|
else if (memcmp("broadcom", phy_comaptible_str, strlen("broadcom")) == 0)
|
|
{
|
|
phy_info.phy_type = BROADCOM_GENERIC_PHY;
|
|
}
|
|
else
|
|
{
|
|
phy_info.phy_type = -1;
|
|
}
|
|
|
|
/* Check if PHY parent is the octeon MDIO bus. Some boards are connected
|
|
though a MUX and for them direct_connect_to_phy will be 0 */
|
|
phy_parent = fdt_parent_offset(fdt_addr, phy);
|
|
if (phy_parent < 0)
|
|
{
|
|
cvmx_dprintf("ERROR : cannot find phy parent for ipd_port=%d ret=%d\n",
|
|
ipd_port, phy_parent);
|
|
return phy_info;
|
|
}
|
|
ret = fdt_node_check_compatible(fdt_addr, phy_parent,
|
|
"cavium,octeon-3860-mdio");
|
|
if (ret == 0)
|
|
{
|
|
phy_info.direct_connect = 1 ;
|
|
uint32_t *mdio_reg_base = (uint32_t *) fdt_getprop(fdt_addr, phy_parent,"reg",0);
|
|
if (mdio_reg_base == 0)
|
|
{
|
|
cvmx_dprintf("ERROR : unable to get reg property in phy mdio\n");
|
|
return phy_info;
|
|
}
|
|
mdio_unit = __mdiobus_addr_to_unit(mdio_reg_base[1]);
|
|
//cvmx_dprintf("phy parent=%s reg_base=%08x unit=%d \n",
|
|
// fdt_get_name(fdt_addr,phy_parent, NULL), mdio_reg_base[1], mdio_unit);
|
|
}
|
|
else
|
|
{
|
|
phy_info.direct_connect = 0;
|
|
/* The PHY is not directly connected to the Octeon MDIO bus.
|
|
SE doesn't have abstractions for MDIO MUX or MDIO MUX drivers and
|
|
hence for the non direct cases code will be needed which is
|
|
board specific.
|
|
For now the the MDIO Unit is defaulted to 1.
|
|
*/
|
|
mdio_unit = 1;
|
|
}
|
|
|
|
phy_addr_ptr = (uint32_t *) fdt_getprop(fdt_addr, phy, "reg", NULL);
|
|
phy_info.phy_addr = cvmx_be32_to_cpu(*phy_addr_ptr) | mdio_unit << 8;
|
|
return phy_info;
|
|
|
|
}
|
|
|
|
/**
|
|
* Return the MII PHY address associated with the given IPD
|
|
* port. The phy address is obtained from the device tree.
|
|
*
|
|
* @param ipd_port Octeon IPD port to get the MII address for.
|
|
*
|
|
* @return MII PHY address and bus number or -1.
|
|
*/
|
|
|
|
int cvmx_helper_board_get_mii_address_from_dt(int ipd_port)
|
|
{
|
|
cvmx_phy_info_t phy_info = __get_phy_info_from_dt(ipd_port);
|
|
return phy_info.phy_addr;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* Return the MII PHY address associated with the given IPD
|
|
* port. A result of -1 means there isn't a MII capable PHY
|
|
* connected to this port. On chips supporting multiple MII
|
|
* busses the bus number is encoded in bits <15:8>.
|
|
*
|
|
* This function must be modified for every new Octeon board.
|
|
* Internally it uses switch statements based on the cvmx_sysinfo
|
|
* data to determine board types and revisions. It replies on the
|
|
* fact that every Octeon board receives a unique board type
|
|
* enumeration from the bootloader.
|
|
*
|
|
* @param ipd_port Octeon IPD port to get the MII address for.
|
|
*
|
|
* @return MII PHY address and bus number or -1.
|
|
*/
|
|
int cvmx_helper_board_get_mii_address(int ipd_port)
|
|
{
|
|
/*
|
|
* Board types we have to know at compile-time.
|
|
*/
|
|
#ifdef OCTEON_BOARD_CAPK_0100ND
|
|
switch (ipd_port) {
|
|
case 0:
|
|
return 2;
|
|
case 1:
|
|
return 3;
|
|
case 2:
|
|
/* XXX Switch PHY? */
|
|
return -1;
|
|
default:
|
|
return -1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* For board types we can determine at runtime.
|
|
*/
|
|
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
|
|
return -1;
|
|
#if !defined(CVMX_BUILD_FOR_LINUX_KERNEL) && (!defined(__FreeBSD__) || !defined(_KERNEL))
|
|
if (cvmx_sysinfo_get()->fdt_addr)
|
|
{
|
|
cvmx_phy_info_t phy_info = __get_phy_info_from_dt(ipd_port);
|
|
//cvmx_dprintf("ipd_port=%d phy_addr=%d\n", ipd_port, phy_info.phy_addr);
|
|
if (phy_info.phy_addr >= 0) return phy_info.phy_addr;
|
|
}
|
|
#endif
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_SIM:
|
|
/* Simulator doesn't have MII */
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBT3000:
|
|
case CVMX_BOARD_TYPE_EBT5800:
|
|
case CVMX_BOARD_TYPE_THUNDER:
|
|
case CVMX_BOARD_TYPE_NICPRO2:
|
|
/* Interface 0 is SPI4, interface 1 is RGMII */
|
|
if ((ipd_port >= 16) && (ipd_port < 20))
|
|
return ipd_port - 16;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_LANAI2_A:
|
|
if (ipd_port == 0)
|
|
return 0;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_LANAI2_U:
|
|
case CVMX_BOARD_TYPE_LANAI2_G:
|
|
if (ipd_port == 0)
|
|
return 0x1c;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_KODAMA:
|
|
case CVMX_BOARD_TYPE_EBH3100:
|
|
case CVMX_BOARD_TYPE_HIKARI:
|
|
case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
|
|
/* Port 0 is WAN connected to a PHY, Port 1 is GMII connected to a
|
|
switch */
|
|
if (ipd_port == 0)
|
|
return 4;
|
|
else if (ipd_port == 1)
|
|
return 9;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBH3000:
|
|
/* Board has dual SPI4 and no PHYs */
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBT5810:
|
|
/* Board has 10g PHYs hooked up to the MII controller on the
|
|
** IXF18201 MAC. The 10G PHYS use clause 45 MDIO which the CN58XX
|
|
** does not support. All MII accesses go through the IXF part. */
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBH5200:
|
|
case CVMX_BOARD_TYPE_EBH5201:
|
|
case CVMX_BOARD_TYPE_EBT5200:
|
|
/* Board has 2 management ports */
|
|
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
|
|
return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT;
|
|
/* Board has 4 SGMII ports. The PHYs start right after the MII
|
|
ports MII0 = 0, MII1 = 1, SGMII = 2-5 */
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port+2;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBH5600:
|
|
case CVMX_BOARD_TYPE_EBH5601:
|
|
case CVMX_BOARD_TYPE_EBH5610:
|
|
/* Board has 1 management port */
|
|
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
|
|
return 0;
|
|
/* Board has 8 SGMII ports. 4 connect out, two connect to a switch,
|
|
and 2 loop to each other */
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port+1;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBB5600:
|
|
{
|
|
static unsigned char qlm_switch_addr = 0;
|
|
|
|
/* Board has 1 management port */
|
|
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
|
|
return 0;
|
|
|
|
/* Board has 8 SGMII ports. 4 connected QLM1, 4 connected QLM3 */
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
{
|
|
if (qlm_switch_addr != 0x3)
|
|
{
|
|
qlm_switch_addr = 0x3; /* QLM1 */
|
|
cvmx_twsix_write_ia(0, 0x71, 0, 1, 1, qlm_switch_addr);
|
|
cvmx_wait_usec(11000); /* Let the write complete */
|
|
}
|
|
return ipd_port+1 + (1<<8);
|
|
}
|
|
else if ((ipd_port >= 16) && (ipd_port < 20))
|
|
{
|
|
if (qlm_switch_addr != 0xC)
|
|
{
|
|
qlm_switch_addr = 0xC; /* QLM3 */
|
|
cvmx_twsix_write_ia(0, 0x71, 0, 1, 1, qlm_switch_addr);
|
|
cvmx_wait_usec(11000); /* Let the write complete */
|
|
}
|
|
return ipd_port-16+1 + (1<<8);
|
|
}
|
|
else
|
|
return -1;
|
|
}
|
|
case CVMX_BOARD_TYPE_EBB6300:
|
|
/* Board has 2 management ports */
|
|
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
|
|
return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT + 4;
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port + 1 + (1<<8);
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EBB6800:
|
|
/* Board has 1 management ports */
|
|
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
|
|
return 6;
|
|
if (ipd_port >= 0x800 && ipd_port < 0x900) /* QLM 0*/
|
|
return 0x101 + ((ipd_port >> 4) & 3); /* SMI 1*/
|
|
if (ipd_port >= 0xa00 && ipd_port < 0xb00) /* QLM 2*/
|
|
return 0x201 + ((ipd_port >> 4) & 3); /* SMI 2*/
|
|
if (ipd_port >= 0xb00 && ipd_port < 0xc00) /* QLM 3*/
|
|
return 0x301 + ((ipd_port >> 4) & 3); /* SMI 3*/
|
|
if (ipd_port >= 0xc00 && ipd_port < 0xd00) /* QLM 4*/
|
|
return 0x001 + ((ipd_port >> 4) & 3); /* SMI 0*/
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_EP6300C:
|
|
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
|
|
return 0x01;
|
|
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT+1)
|
|
return 0x02;
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
{
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int mode = cvmx_helper_interface_get_mode(interface);
|
|
if (mode == CVMX_HELPER_INTERFACE_MODE_XAUI)
|
|
return ipd_port;
|
|
else if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port + 3;
|
|
else
|
|
return -1;
|
|
}
|
|
#endif
|
|
break;
|
|
case CVMX_BOARD_TYPE_CUST_NB5:
|
|
if (ipd_port == 2)
|
|
return 4;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_NIC_XLE_4G:
|
|
/* Board has 4 SGMII ports. connected QLM3(interface 1) */
|
|
if ((ipd_port >= 16) && (ipd_port < 20))
|
|
return ipd_port - 16 + 1;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_NIC_XLE_10G:
|
|
case CVMX_BOARD_TYPE_NIC10E:
|
|
return -1; /* We don't use clause 45 MDIO for anything */
|
|
case CVMX_BOARD_TYPE_NIC4E:
|
|
if (ipd_port >= 0 && ipd_port <= 3)
|
|
return (ipd_port + 0x1f) & 0x1f;
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_NIC2E:
|
|
if (ipd_port >= 0 && ipd_port <= 1)
|
|
return (ipd_port + 1);
|
|
else
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_REDWING:
|
|
return -1; /* No PHYs connected to Octeon */
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
return -1; /* No PHYs are connected to Octeon, everything is through switch */
|
|
case CVMX_BOARD_TYPE_CUST_WSX16:
|
|
if (ipd_port >= 0 && ipd_port <= 3)
|
|
return ipd_port;
|
|
else if (ipd_port >= 16 && ipd_port <= 19)
|
|
return ipd_port - 16 + 4;
|
|
else
|
|
return -1;
|
|
|
|
/* Private vendor-defined boards. */
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
/* Interface 1 is 12 BCM5482S PHYs. */
|
|
if ((ipd_port >= 16) && (ipd_port < 28))
|
|
return ipd_port - 16;
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR730:
|
|
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
|
|
return (ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT) + 0x81;
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
return ipd_port;
|
|
return -1;
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR321X:
|
|
/* Port 0 is a Marvell 88E6161 switch, ports 1 and 2 are Marvell
|
|
88E1111 interfaces. */
|
|
switch (ipd_port) {
|
|
case 0:
|
|
return 16;
|
|
case 1:
|
|
return 1;
|
|
case 2:
|
|
return 2;
|
|
default:
|
|
return -1;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* Some unknown board. Somebody forgot to update this function... */
|
|
cvmx_dprintf("%s: Unknown board type %d\n",
|
|
__FUNCTION__, cvmx_sysinfo_get()->board_type);
|
|
return -1;
|
|
}
|
|
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
|
|
EXPORT_SYMBOL(cvmx_helper_board_get_mii_address);
|
|
#endif
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Get link state of marvell PHY
|
|
*/
|
|
static cvmx_helper_link_info_t __get_marvell_phy_link_state(int phy_addr)
|
|
{
|
|
cvmx_helper_link_info_t result;
|
|
int phy_status;
|
|
|
|
result.u64 = 0;
|
|
/*All the speed information can be read from register 17 in one go.*/
|
|
phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 17);
|
|
|
|
/* If the resolve bit 11 isn't set, see if autoneg is turned off
|
|
(bit 12, reg 0). The resolve bit doesn't get set properly when
|
|
autoneg is off, so force it */
|
|
if ((phy_status & (1<<11)) == 0)
|
|
{
|
|
int auto_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0);
|
|
if ((auto_status & (1<<12)) == 0)
|
|
phy_status |= 1<<11;
|
|
}
|
|
|
|
/* Only return a link if the PHY has finished auto negotiation
|
|
and set the resolved bit (bit 11) */
|
|
if (phy_status & (1<<11))
|
|
{
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = ((phy_status>>13)&1);
|
|
switch ((phy_status>>14)&3)
|
|
{
|
|
case 0: /* 10 Mbps */
|
|
result.s.speed = 10;
|
|
break;
|
|
case 1: /* 100 Mbps */
|
|
result.s.speed = 100;
|
|
break;
|
|
case 2: /* 1 Gbps */
|
|
result.s.speed = 1000;
|
|
break;
|
|
case 3: /* Illegal */
|
|
result.u64 = 0;
|
|
break;
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Get link state of broadcom PHY
|
|
*/
|
|
static cvmx_helper_link_info_t __get_broadcom_phy_link_state(int phy_addr)
|
|
{
|
|
cvmx_helper_link_info_t result;
|
|
int phy_status;
|
|
|
|
result.u64 = 0;
|
|
/* Below we are going to read SMI/MDIO register 0x19 which works
|
|
on Broadcom parts */
|
|
phy_status = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x19);
|
|
switch ((phy_status>>8) & 0x7)
|
|
{
|
|
case 0:
|
|
result.u64 = 0;
|
|
break;
|
|
case 1:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 0;
|
|
result.s.speed = 10;
|
|
break;
|
|
case 2:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 10;
|
|
break;
|
|
case 3:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 0;
|
|
result.s.speed = 100;
|
|
break;
|
|
case 4:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 100;
|
|
break;
|
|
case 5:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 100;
|
|
break;
|
|
case 6:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 0;
|
|
result.s.speed = 1000;
|
|
break;
|
|
case 7:
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Get link state using inband status
|
|
*/
|
|
static cvmx_helper_link_info_t __get_inband_link_state(int ipd_port)
|
|
{
|
|
cvmx_helper_link_info_t result;
|
|
cvmx_gmxx_rxx_rx_inbnd_t inband_status;
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int index = cvmx_helper_get_interface_index_num(ipd_port);
|
|
|
|
result.u64 = 0;
|
|
inband_status.u64 = cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface));
|
|
result.s.link_up = inband_status.s.status;
|
|
result.s.full_duplex = inband_status.s.duplex;
|
|
switch (inband_status.s.speed)
|
|
{
|
|
case 0: /* 10 Mbps */
|
|
result.s.speed = 10;
|
|
break;
|
|
case 1: /* 100 Mbps */
|
|
result.s.speed = 100;
|
|
break;
|
|
case 2: /* 1 Gbps */
|
|
result.s.speed = 1000;
|
|
break;
|
|
case 3: /* Illegal */
|
|
result.u64 = 0;
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#if !defined(CVMX_BUILD_FOR_LINUX_KERNEL) && (!defined(__FreeBSD__) || !defined(_KERNEL))
|
|
/**
|
|
* @INTERNAL
|
|
* Switch MDIO mux to the specified port.
|
|
*/
|
|
static int __switch_mdio_mux(int ipd_port)
|
|
{
|
|
/* This method is board specific and doesn't use the device tree
|
|
information as SE doesn't implement MDIO MUX abstration */
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_EBB5600:
|
|
{
|
|
static unsigned char qlm_switch_addr = 0;
|
|
/* Board has 1 management port */
|
|
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
|
|
return 0;
|
|
/* Board has 8 SGMII ports. 4 connected QLM1, 4 connected QLM3 */
|
|
if ((ipd_port >= 0) && (ipd_port < 4))
|
|
{
|
|
if (qlm_switch_addr != 0x3)
|
|
{
|
|
qlm_switch_addr = 0x3; /* QLM1 */
|
|
cvmx_twsix_write_ia(0, 0x71, 0, 1, 1, qlm_switch_addr);
|
|
cvmx_wait_usec(11000); /* Let the write complete */
|
|
}
|
|
return ipd_port+1 + (1<<8);
|
|
}
|
|
else if ((ipd_port >= 16) && (ipd_port < 20))
|
|
{
|
|
if (qlm_switch_addr != 0xC)
|
|
{
|
|
qlm_switch_addr = 0xC; /* QLM3 */
|
|
cvmx_twsix_write_ia(0, 0x71, 0, 1, 1, qlm_switch_addr);
|
|
cvmx_wait_usec(11000); /* Let the write complete */
|
|
}
|
|
return ipd_port-16+1 + (1<<8);
|
|
}
|
|
else
|
|
return -1;
|
|
}
|
|
case CVMX_BOARD_TYPE_EBB6600:
|
|
{
|
|
static unsigned char qlm_switch_addr = 0;
|
|
int old_twsi_switch_reg;
|
|
/* Board has 2 management ports */
|
|
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) &&
|
|
(ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
|
|
return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT + 4;
|
|
if ((ipd_port >= 0) && (ipd_port < 4)) /* QLM 2 */
|
|
{
|
|
if (qlm_switch_addr != 2)
|
|
{
|
|
int tries;
|
|
qlm_switch_addr = 2;
|
|
tries = 3;
|
|
do {
|
|
old_twsi_switch_reg = cvmx_twsix_read8(0, 0x70, 0);
|
|
} while (tries-- > 0 && old_twsi_switch_reg < 0);
|
|
/* Set I2C MUX to enable port expander */
|
|
cvmx_retry_i2c_write(0, 0x70, 0, 1, 0, 8);
|
|
/* Set selecter to QLM 1 */
|
|
cvmx_retry_i2c_write(0, 0x38, 0, 1, 0, 0xff);
|
|
/* disable port expander */
|
|
cvmx_retry_i2c_write(0, 0x70, 0, 1, 0, old_twsi_switch_reg);
|
|
}
|
|
return 0x101 + ipd_port;
|
|
}
|
|
else if ((ipd_port >= 16) && (ipd_port < 20)) /* QLM 1 */
|
|
{
|
|
if (qlm_switch_addr != 1)
|
|
{
|
|
int tries;
|
|
qlm_switch_addr = 1;
|
|
tries = 3;
|
|
do {
|
|
old_twsi_switch_reg = cvmx_twsix_read8(0, 0x70, 0);
|
|
} while (tries-- > 0 && old_twsi_switch_reg < 0);
|
|
/* Set I2C MUX to enable port expander */
|
|
cvmx_retry_i2c_write(0, 0x70, 0, 1, 0, 8);
|
|
/* Set selecter to QLM 2 */
|
|
cvmx_retry_i2c_write(0, 0x38, 0, 1, 0, 0xf7);
|
|
/* disable port expander */
|
|
cvmx_retry_i2c_write(0, 0x70, 0, 1, 0, old_twsi_switch_reg);
|
|
}
|
|
return 0x101 + (ipd_port - 16);
|
|
} else
|
|
return -1;
|
|
}
|
|
case CVMX_BOARD_TYPE_EBB6100:
|
|
{
|
|
static char gpio_configured = 0;
|
|
|
|
if (!gpio_configured)
|
|
{
|
|
cvmx_gpio_cfg(3, 1);
|
|
gpio_configured = 1;
|
|
}
|
|
/* Board has 2 management ports */
|
|
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) &&
|
|
(ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
|
|
return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT + 4;
|
|
if ((ipd_port >= 0) && (ipd_port < 4)) /* QLM 2 */
|
|
{
|
|
cvmx_gpio_set(1ull << 3);
|
|
return 0x101 + ipd_port;
|
|
}
|
|
else if ((ipd_port >= 16) && (ipd_port < 20)) /* QLM 0 */
|
|
{
|
|
cvmx_gpio_clear(1ull << 3);
|
|
return 0x101 + (ipd_port - 16);
|
|
}
|
|
else
|
|
{
|
|
printf("%s: Unknown ipd port 0x%x\n", __func__, ipd_port);
|
|
return -1;
|
|
}
|
|
}
|
|
default:
|
|
{
|
|
cvmx_dprintf("ERROR : unexpected mdio switch for board=%08x\n",
|
|
cvmx_sysinfo_get()->board_type);
|
|
return -1;
|
|
}
|
|
}
|
|
/* should never get here */
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* This function is used ethernet ports link speed. This functions uses the
|
|
* device tree information to determine the phy address and type of PHY.
|
|
* The only supproted PHYs are Marvell and Broadcom.
|
|
*
|
|
* @param ipd_port IPD input port associated with the port we want to get link
|
|
* status for.
|
|
*
|
|
* @return The ports link status. If the link isn't fully resolved, this must
|
|
* return zero.
|
|
*/
|
|
|
|
cvmx_helper_link_info_t __cvmx_helper_board_link_get_from_dt(int ipd_port)
|
|
{
|
|
cvmx_helper_link_info_t result;
|
|
cvmx_phy_info_t phy_info;
|
|
|
|
result.u64 = 0;
|
|
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_SIM)
|
|
{
|
|
/* The simulator gives you a simulated 1Gbps full duplex link */
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
phy_info = __get_phy_info_from_dt(ipd_port);
|
|
//cvmx_dprintf("ipd_port=%d phy_addr=%d dc=%d type=%d \n", ipd_port,
|
|
// phy_info.phy_addr, phy_info.direct_connect, phy_info.phy_type);
|
|
if (phy_info.phy_addr < 0) return result;
|
|
|
|
if (phy_info.direct_connect == 0)
|
|
__switch_mdio_mux(ipd_port);
|
|
switch(phy_info.phy_type)
|
|
{
|
|
case BROADCOM_GENERIC_PHY:
|
|
result = __get_broadcom_phy_link_state(phy_info.phy_addr);
|
|
break;
|
|
case MARVELL_GENERIC_PHY:
|
|
result = __get_marvell_phy_link_state(phy_info.phy_addr);
|
|
break;
|
|
default:
|
|
result = __get_inband_link_state(ipd_port);
|
|
}
|
|
return result;
|
|
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* This function invokes __cvmx_helper_board_link_get_from_dt when device tree
|
|
* info is available. When the device tree information is not available then
|
|
* this function is the board specific method of determining an
|
|
* ethernet ports link speed. Most Octeon boards have Marvell PHYs
|
|
* and are handled by the fall through case. This function must be
|
|
* updated for boards that don't have the normal Marvell PHYs.
|
|
*
|
|
* This function must be modified for every new Octeon board.
|
|
* Internally it uses switch statements based on the cvmx_sysinfo
|
|
* data to determine board types and revisions. It relies on the
|
|
* fact that every Octeon board receives a unique board type
|
|
* enumeration from the bootloader.
|
|
*
|
|
* @param ipd_port IPD input port associated with the port we want to get link
|
|
* status for.
|
|
*
|
|
* @return The ports link status. If the link isn't fully resolved, this must
|
|
* return zero.
|
|
*/
|
|
cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
|
|
{
|
|
cvmx_helper_link_info_t result;
|
|
int phy_addr;
|
|
int is_broadcom_phy = 0;
|
|
|
|
#if !defined(CVMX_BUILD_FOR_LINUX_KERNEL) && (!defined(__FreeBSD__) || !defined(_KERNEL))
|
|
if (cvmx_sysinfo_get()->fdt_addr)
|
|
{
|
|
return __cvmx_helper_board_link_get_from_dt(ipd_port);
|
|
}
|
|
#endif
|
|
|
|
/* Give the user a chance to override the processing of this function */
|
|
if (cvmx_override_board_link_get)
|
|
return cvmx_override_board_link_get(ipd_port);
|
|
|
|
/* Unless we fix it later, all links are defaulted to down */
|
|
result.u64 = 0;
|
|
|
|
#if !defined(OCTEON_BOARD_CAPK_0100ND)
|
|
/* This switch statement should handle all ports that either don't use
|
|
Marvell PHYS, or don't support in-band status */
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_SIM:
|
|
/* The simulator gives you a simulated 1Gbps full duplex link */
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
case CVMX_BOARD_TYPE_LANAI2_A:
|
|
case CVMX_BOARD_TYPE_LANAI2_U:
|
|
case CVMX_BOARD_TYPE_LANAI2_G:
|
|
break;
|
|
case CVMX_BOARD_TYPE_EBH3100:
|
|
case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
|
|
/* Port 1 on these boards is always Gigabit */
|
|
if (ipd_port == 1)
|
|
{
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
/* Fall through to the generic code below */
|
|
break;
|
|
case CVMX_BOARD_TYPE_EBH5600:
|
|
case CVMX_BOARD_TYPE_EBH5601:
|
|
case CVMX_BOARD_TYPE_EBH5610:
|
|
/* Board has 1 management ports */
|
|
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
case CVMX_BOARD_TYPE_EBH5200:
|
|
case CVMX_BOARD_TYPE_EBH5201:
|
|
case CVMX_BOARD_TYPE_EBT5200:
|
|
/* Board has 2 management ports */
|
|
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
case CVMX_BOARD_TYPE_EBB6100:
|
|
case CVMX_BOARD_TYPE_EBB6300: /* Only for MII mode, with PHY addresses 0/1. Default is RGMII*/
|
|
case CVMX_BOARD_TYPE_EBB6600: /* Only for MII mode, with PHY addresses 0/1. Default is RGMII*/
|
|
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) && (ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2))
|
|
&& cvmx_helper_board_get_mii_address(ipd_port) >= 0 && cvmx_helper_board_get_mii_address(ipd_port) <= 1)
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
case CVMX_BOARD_TYPE_EP6300C:
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
case CVMX_BOARD_TYPE_CUST_NB5:
|
|
/* Port 1 on these boards is always Gigabit */
|
|
if (ipd_port == 1)
|
|
{
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
else /* The other port uses a broadcom PHY */
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
/* Port 1 on these boards is always Gigabit */
|
|
if (ipd_port == 2)
|
|
{
|
|
/* Port 2 is not hooked up */
|
|
result.u64 = 0;
|
|
return result;
|
|
}
|
|
else
|
|
{
|
|
/* Ports 0 and 1 connect to the switch */
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
case CVMX_BOARD_TYPE_NIC4E:
|
|
case CVMX_BOARD_TYPE_NIC2E:
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
/* Private vendor-defined boards. */
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR730:
|
|
/* Ports are BCM5482S */
|
|
is_broadcom_phy = 1;
|
|
break;
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR321X:
|
|
/* Port 0 connects to the switch */
|
|
if (ipd_port == 0)
|
|
{
|
|
result.s.link_up = 1;
|
|
result.s.full_duplex = 1;
|
|
result.s.speed = 1000;
|
|
return result;
|
|
}
|
|
break;
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
phy_addr = cvmx_helper_board_get_mii_address(ipd_port);
|
|
//cvmx_dprintf("ipd_port=%d phy_addr=%d broadcom=%d\n",
|
|
// ipd_port, phy_addr, is_broadcom_phy);
|
|
if (phy_addr != -1)
|
|
{
|
|
if (is_broadcom_phy)
|
|
{
|
|
result = __get_broadcom_phy_link_state(phy_addr);
|
|
}
|
|
else
|
|
{
|
|
/* This code assumes we are using a Marvell Gigabit PHY. */
|
|
result = __get_marvell_phy_link_state(phy_addr);
|
|
}
|
|
}
|
|
else if (OCTEON_IS_MODEL(OCTEON_CN3XXX) || OCTEON_IS_MODEL(OCTEON_CN58XX)
|
|
|| OCTEON_IS_MODEL(OCTEON_CN50XX))
|
|
{
|
|
/* We don't have a PHY address, so attempt to use in-band status. It is
|
|
really important that boards not supporting in-band status never get
|
|
here. Reading broken in-band status tends to do bad things */
|
|
result = __get_inband_link_state(ipd_port);
|
|
}
|
|
else
|
|
{
|
|
/* We don't have a PHY address and we don't have in-band status. There
|
|
is no way to determine the link speed. Return down assuming this
|
|
port isn't wired */
|
|
result.u64 = 0;
|
|
}
|
|
|
|
/* If link is down, return all fields as zero. */
|
|
if (!result.s.link_up)
|
|
result.u64 = 0;
|
|
|
|
return result;
|
|
}
|
|
|
|
|
|
/**
|
|
* This function as a board specific method of changing the PHY
|
|
* speed, duplex, and autonegotiation. This programs the PHY and
|
|
* not Octeon. This can be used to force Octeon's links to
|
|
* specific settings.
|
|
*
|
|
* @param phy_addr The address of the PHY to program
|
|
* @param link_flags
|
|
* Flags to control autonegotiation. Bit 0 is autonegotiation
|
|
* enable/disable to maintain backward compatibility.
|
|
* @param link_info Link speed to program. If the speed is zero and autonegotiation
|
|
* is enabled, all possible negotiation speeds are advertised.
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
int cvmx_helper_board_link_set_phy(int phy_addr, cvmx_helper_board_set_phy_link_flags_types_t link_flags,
|
|
cvmx_helper_link_info_t link_info)
|
|
{
|
|
|
|
/* Set the flow control settings based on link_flags */
|
|
if ((link_flags & set_phy_link_flags_flow_control_mask) != set_phy_link_flags_flow_control_dont_touch)
|
|
{
|
|
cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
|
|
reg_autoneg_adver.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
|
|
reg_autoneg_adver.s.asymmetric_pause = (link_flags & set_phy_link_flags_flow_control_mask) == set_phy_link_flags_flow_control_enable;
|
|
reg_autoneg_adver.s.pause = (link_flags & set_phy_link_flags_flow_control_mask) == set_phy_link_flags_flow_control_enable;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER, reg_autoneg_adver.u16);
|
|
}
|
|
|
|
/* If speed isn't set and autoneg is on advertise all supported modes */
|
|
if ((link_flags & set_phy_link_flags_autoneg) && (link_info.s.speed == 0))
|
|
{
|
|
cvmx_mdio_phy_reg_control_t reg_control;
|
|
cvmx_mdio_phy_reg_status_t reg_status;
|
|
cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
|
|
cvmx_mdio_phy_reg_extended_status_t reg_extended_status;
|
|
cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
|
|
|
|
reg_status.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_STATUS);
|
|
reg_autoneg_adver.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
|
|
reg_autoneg_adver.s.advert_100base_t4 = reg_status.s.capable_100base_t4;
|
|
reg_autoneg_adver.s.advert_10base_tx_full = reg_status.s.capable_10_full;
|
|
reg_autoneg_adver.s.advert_10base_tx_half = reg_status.s.capable_10_half;
|
|
reg_autoneg_adver.s.advert_100base_tx_full = reg_status.s.capable_100base_x_full;
|
|
reg_autoneg_adver.s.advert_100base_tx_half = reg_status.s.capable_100base_x_half;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER, reg_autoneg_adver.u16);
|
|
if (reg_status.s.capable_extended_status)
|
|
{
|
|
reg_extended_status.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_EXTENDED_STATUS);
|
|
reg_control_1000.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000);
|
|
reg_control_1000.s.advert_1000base_t_full = reg_extended_status.s.capable_1000base_t_full;
|
|
reg_control_1000.s.advert_1000base_t_half = reg_extended_status.s.capable_1000base_t_half;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000, reg_control_1000.u16);
|
|
}
|
|
reg_control.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL);
|
|
reg_control.s.autoneg_enable = 1;
|
|
reg_control.s.restart_autoneg = 1;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
|
|
}
|
|
else if ((link_flags & set_phy_link_flags_autoneg))
|
|
{
|
|
cvmx_mdio_phy_reg_control_t reg_control;
|
|
cvmx_mdio_phy_reg_status_t reg_status;
|
|
cvmx_mdio_phy_reg_autoneg_adver_t reg_autoneg_adver;
|
|
cvmx_mdio_phy_reg_control_1000_t reg_control_1000;
|
|
|
|
reg_status.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_STATUS);
|
|
reg_autoneg_adver.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER);
|
|
reg_autoneg_adver.s.advert_100base_t4 = 0;
|
|
reg_autoneg_adver.s.advert_10base_tx_full = 0;
|
|
reg_autoneg_adver.s.advert_10base_tx_half = 0;
|
|
reg_autoneg_adver.s.advert_100base_tx_full = 0;
|
|
reg_autoneg_adver.s.advert_100base_tx_half = 0;
|
|
if (reg_status.s.capable_extended_status)
|
|
{
|
|
reg_control_1000.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000);
|
|
reg_control_1000.s.advert_1000base_t_full = 0;
|
|
reg_control_1000.s.advert_1000base_t_half = 0;
|
|
}
|
|
switch (link_info.s.speed)
|
|
{
|
|
case 10:
|
|
reg_autoneg_adver.s.advert_10base_tx_full = link_info.s.full_duplex;
|
|
reg_autoneg_adver.s.advert_10base_tx_half = !link_info.s.full_duplex;
|
|
break;
|
|
case 100:
|
|
reg_autoneg_adver.s.advert_100base_tx_full = link_info.s.full_duplex;
|
|
reg_autoneg_adver.s.advert_100base_tx_half = !link_info.s.full_duplex;
|
|
break;
|
|
case 1000:
|
|
reg_control_1000.s.advert_1000base_t_full = link_info.s.full_duplex;
|
|
reg_control_1000.s.advert_1000base_t_half = !link_info.s.full_duplex;
|
|
break;
|
|
}
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_AUTONEG_ADVER, reg_autoneg_adver.u16);
|
|
if (reg_status.s.capable_extended_status)
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL_1000, reg_control_1000.u16);
|
|
reg_control.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL);
|
|
reg_control.s.autoneg_enable = 1;
|
|
reg_control.s.restart_autoneg = 1;
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
|
|
}
|
|
else
|
|
{
|
|
cvmx_mdio_phy_reg_control_t reg_control;
|
|
reg_control.u16 = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL);
|
|
reg_control.s.autoneg_enable = 0;
|
|
reg_control.s.restart_autoneg = 1;
|
|
reg_control.s.duplex = link_info.s.full_duplex;
|
|
if (link_info.s.speed == 1000)
|
|
{
|
|
reg_control.s.speed_msb = 1;
|
|
reg_control.s.speed_lsb = 0;
|
|
}
|
|
else if (link_info.s.speed == 100)
|
|
{
|
|
reg_control.s.speed_msb = 0;
|
|
reg_control.s.speed_lsb = 1;
|
|
}
|
|
else if (link_info.s.speed == 10)
|
|
{
|
|
reg_control.s.speed_msb = 0;
|
|
reg_control.s.speed_lsb = 0;
|
|
}
|
|
cvmx_mdio_write(phy_addr >> 8, phy_addr & 0xff, CVMX_MDIO_PHY_REG_CONTROL, reg_control.u16);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* This function is called by cvmx_helper_interface_probe() after it
|
|
* determines the number of ports Octeon can support on a specific
|
|
* interface. This function is the per board location to override
|
|
* this value. It is called with the number of ports Octeon might
|
|
* support and should return the number of actual ports on the
|
|
* board.
|
|
*
|
|
* This function must be modified for every new Octeon board.
|
|
* Internally it uses switch statements based on the cvmx_sysinfo
|
|
* data to determine board types and revisions. It relies on the
|
|
* fact that every Octeon board receives a unique board type
|
|
* enumeration from the bootloader.
|
|
*
|
|
* @param interface Interface to probe
|
|
* @param supported_ports
|
|
* Number of ports Octeon supports.
|
|
*
|
|
* @return Number of ports the actual board supports. Many times this will
|
|
* simple be "support_ports".
|
|
*/
|
|
int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
|
|
{
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
|
|
case CVMX_BOARD_TYPE_LANAI2_A:
|
|
case CVMX_BOARD_TYPE_LANAI2_U:
|
|
case CVMX_BOARD_TYPE_LANAI2_G:
|
|
if (interface == 0)
|
|
return 2;
|
|
break;
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
if (interface == 0)
|
|
return 2;
|
|
break;
|
|
case CVMX_BOARD_TYPE_NIC_XLE_4G:
|
|
if (interface == 0)
|
|
return 0;
|
|
break;
|
|
/* The 2nd interface on the EBH5600 is connected to the Marvel switch,
|
|
which we don't support. Disable ports connected to it */
|
|
case CVMX_BOARD_TYPE_EBH5600:
|
|
if (interface == 1)
|
|
return 0;
|
|
break;
|
|
case CVMX_BOARD_TYPE_EBB5600:
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
if (cvmx_helper_interface_get_mode(interface) == CVMX_HELPER_INTERFACE_MODE_PICMG)
|
|
return 0;
|
|
#endif
|
|
break;
|
|
case CVMX_BOARD_TYPE_EBT5810:
|
|
return 1; /* Two ports on each SPI: 1 hooked to MAC, 1 loopback
|
|
** Loopback disabled by default. */
|
|
case CVMX_BOARD_TYPE_NIC2E:
|
|
if (interface == 0)
|
|
return 2;
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
if (interface == 1)
|
|
return 12;
|
|
break;
|
|
#endif
|
|
}
|
|
#ifdef CVMX_BUILD_FOR_UBOOT
|
|
if (CVMX_HELPER_INTERFACE_MODE_SPI == cvmx_helper_interface_get_mode(interface) && getenv("disable_spi"))
|
|
return 0;
|
|
#endif
|
|
return supported_ports;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Enable packet input/output from the hardware. This function is
|
|
* called after by cvmx_helper_packet_hardware_enable() to
|
|
* perform board specific initialization. For most boards
|
|
* nothing is needed.
|
|
*
|
|
* @param interface Interface to enable
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
int __cvmx_helper_board_hardware_enable(int interface)
|
|
{
|
|
if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5)
|
|
{
|
|
if (interface == 0)
|
|
{
|
|
/* Different config for switch port */
|
|
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0);
|
|
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0);
|
|
/* Boards with gigabit WAN ports need a different setting that is
|
|
compatible with 100 Mbit settings */
|
|
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0xc);
|
|
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0xc);
|
|
}
|
|
}
|
|
else if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_LANAI2_U)
|
|
{
|
|
if (interface == 0)
|
|
{
|
|
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 16);
|
|
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 16);
|
|
}
|
|
}
|
|
else if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3010_EVB_HS5)
|
|
{
|
|
/* Broadcom PHYs require different ASX clocks. Unfortunately
|
|
many customer don't define a new board Id and simply
|
|
mangle the CN3010_EVB_HS5 */
|
|
if (interface == 0)
|
|
{
|
|
/* Some customers boards use a hacked up bootloader that identifies them as
|
|
** CN3010_EVB_HS5 evaluation boards. This leads to all kinds of configuration
|
|
** problems. Detect one case, and print warning, while trying to do the right thing.
|
|
*/
|
|
int phy_addr = cvmx_helper_board_get_mii_address(0);
|
|
if (phy_addr != -1)
|
|
{
|
|
int phy_identifier = cvmx_mdio_read(phy_addr >> 8, phy_addr & 0xff, 0x2);
|
|
/* Is it a Broadcom PHY? */
|
|
if (phy_identifier == 0x0143)
|
|
{
|
|
cvmx_dprintf("\n");
|
|
cvmx_dprintf("ERROR:\n");
|
|
cvmx_dprintf("ERROR: Board type is CVMX_BOARD_TYPE_CN3010_EVB_HS5, but Broadcom PHY found.\n");
|
|
cvmx_dprintf("ERROR: The board type is mis-configured, and software malfunctions are likely.\n");
|
|
cvmx_dprintf("ERROR: All boards require a unique board type to identify them.\n");
|
|
cvmx_dprintf("ERROR:\n");
|
|
cvmx_dprintf("\n");
|
|
cvmx_wait(1000000000);
|
|
cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 5);
|
|
cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 5);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Gets the clock type used for the USB block based on board type.
|
|
* Used by the USB code for auto configuration of clock type.
|
|
*
|
|
* @return USB clock type enumeration
|
|
*/
|
|
cvmx_helper_board_usb_clock_types_t __cvmx_helper_board_usb_get_clock_type(void)
|
|
{
|
|
#if !defined(CVMX_BUILD_FOR_LINUX_KERNEL) && (!defined(__FreeBSD__) || !defined(_KERNEL))
|
|
const void *fdt_addr = CASTPTR(const void *, cvmx_sysinfo_get()->fdt_addr);
|
|
int nodeoffset;
|
|
const void *nodep;
|
|
int len;
|
|
uint32_t speed = 0;
|
|
const char *type = NULL;
|
|
|
|
if (fdt_addr)
|
|
{
|
|
nodeoffset = fdt_path_offset(fdt_addr, "/soc/uctl");
|
|
if (nodeoffset < 0)
|
|
nodeoffset = fdt_path_offset(fdt_addr, "/soc/usbn");
|
|
|
|
if (nodeoffset >= 0)
|
|
{
|
|
nodep = fdt_getprop(fdt_addr, nodeoffset, "refclk-type", &len);
|
|
if (nodep != NULL && len > 0)
|
|
type = (const char *)nodep;
|
|
else
|
|
type = "unknown";
|
|
nodep = fdt_getprop(fdt_addr, nodeoffset, "refclk-frequency", &len);
|
|
if (nodep != NULL && len == sizeof(uint32_t))
|
|
speed = fdt32_to_cpu(*(int *)nodep);
|
|
else
|
|
speed = 0;
|
|
if (!strcmp(type, "crystal"))
|
|
{
|
|
if (speed == 0 || speed == 12000000)
|
|
return USB_CLOCK_TYPE_CRYSTAL_12;
|
|
else
|
|
printf("Warning: invalid crystal speed for USB clock type in FDT\n");
|
|
}
|
|
else if (!strcmp(type, "external"))
|
|
{
|
|
switch (speed) {
|
|
case 12000000:
|
|
return USB_CLOCK_TYPE_REF_12;
|
|
case 24000000:
|
|
return USB_CLOCK_TYPE_REF_24;
|
|
case 0:
|
|
case 48000000:
|
|
return USB_CLOCK_TYPE_REF_48;
|
|
default:
|
|
printf("Warning: invalid USB clock speed of %u hz in FDT\n", speed);
|
|
}
|
|
}
|
|
else
|
|
printf("Warning: invalid USB reference clock type \"%s\" in FDT\n", type ? type : "NULL");
|
|
}
|
|
}
|
|
#endif
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_BBGW_REF:
|
|
case CVMX_BOARD_TYPE_LANAI2_A:
|
|
case CVMX_BOARD_TYPE_LANAI2_U:
|
|
case CVMX_BOARD_TYPE_LANAI2_G:
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR321X:
|
|
#endif
|
|
#if defined(OCTEON_BOARD_CAPK_0100ND)
|
|
case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
|
|
#endif
|
|
case CVMX_BOARD_TYPE_NIC10E_66:
|
|
return USB_CLOCK_TYPE_CRYSTAL_12;
|
|
case CVMX_BOARD_TYPE_NIC10E:
|
|
return USB_CLOCK_TYPE_REF_12;
|
|
default:
|
|
break;
|
|
}
|
|
if (OCTEON_IS_MODEL(OCTEON_CN6XXX) /* Most boards except NIC10e use a 12MHz crystal */
|
|
|| OCTEON_IS_MODEL(OCTEON_CNF7XXX))
|
|
return USB_CLOCK_TYPE_CRYSTAL_12;
|
|
return USB_CLOCK_TYPE_REF_48;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Adjusts the number of available USB ports on Octeon based on board
|
|
* specifics.
|
|
*
|
|
* @param supported_ports expected number of ports based on chip type;
|
|
*
|
|
*
|
|
* @return number of available usb ports, based on board specifics.
|
|
* Return value is supported_ports if function does not
|
|
* override.
|
|
*/
|
|
int __cvmx_helper_board_usb_get_num_ports(int supported_ports)
|
|
{
|
|
switch (cvmx_sysinfo_get()->board_type)
|
|
{
|
|
case CVMX_BOARD_TYPE_NIC_XLE_4G:
|
|
case CVMX_BOARD_TYPE_NIC2E:
|
|
return 0;
|
|
}
|
|
|
|
return supported_ports;
|
|
}
|
|
|
|
|