410 lines
14 KiB
C
410 lines
14 KiB
C
/*-
|
|
* Copyright (c) 2000 - 2004 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _SYS_ATA_H_
|
|
#define _SYS_ATA_H_
|
|
|
|
#include <sys/ioccom.h>
|
|
|
|
/* ATA/ATAPI device parameters */
|
|
struct ata_params {
|
|
/*000*/ u_int16_t config; /* configuration info */
|
|
#define ATA_PROTO_MASK 0x8003
|
|
#define ATA_PROTO_ATA 0x0002
|
|
#define ATA_PROTO_ATAPI_12 0x8000
|
|
#define ATA_PROTO_ATAPI_16 0x8001
|
|
#define ATA_ATAPI_TYPE_MASK 0x1f00
|
|
#define ATA_ATAPI_TYPE_DIRECT 0x0000 /* disk/floppy */
|
|
#define ATA_ATAPI_TYPE_TAPE 0x0100 /* streaming tape */
|
|
#define ATA_ATAPI_TYPE_CDROM 0x0500 /* CD-ROM device */
|
|
#define ATA_ATAPI_TYPE_OPTICAL 0x0700 /* optical disk */
|
|
#define ATA_DRQ_MASK 0x0060
|
|
#define ATA_DRQ_SLOW 0x0000 /* cpu 3 ms delay */
|
|
#define ATA_DRQ_INTR 0x0020 /* interrupt 10 ms delay */
|
|
#define ATA_DRQ_FAST 0x0040 /* accel 50 us delay */
|
|
|
|
/*001*/ u_int16_t cylinders; /* # of cylinders */
|
|
u_int16_t reserved2;
|
|
/*003*/ u_int16_t heads; /* # heads */
|
|
u_int16_t obsolete4;
|
|
u_int16_t obsolete5;
|
|
/*006*/ u_int16_t sectors; /* # sectors/track */
|
|
/*007*/ u_int16_t vendor7[3];
|
|
/*010*/ u_int8_t serial[20]; /* serial number */
|
|
/*020*/ u_int16_t retired20;
|
|
u_int16_t retired21;
|
|
u_int16_t obsolete22;
|
|
/*023*/ u_int8_t revision[8]; /* firmware revision */
|
|
/*027*/ u_int8_t model[40]; /* model name */
|
|
/*047*/ u_int16_t sectors_intr; /* sectors per interrupt */
|
|
/*048*/ u_int16_t usedmovsd; /* double word read/write? */
|
|
/*049*/ u_int16_t capabilities1;
|
|
#define ATA_SUPPORT_DMA 0x0100
|
|
#define ATA_SUPPORT_LBA 0x0200
|
|
#define ATA_SUPPORT_OVERLAP 0x4000
|
|
|
|
/*050*/ u_int16_t capabilities2;
|
|
/*051*/ u_int16_t retired_piomode; /* PIO modes 0-2 */
|
|
#define ATA_RETIRED_PIO_MASK 0x0300
|
|
|
|
/*052*/ u_int16_t retired_dmamode; /* DMA modes */
|
|
#define ATA_RETIRED_DMA_MASK 0x0003
|
|
|
|
/*053*/ u_int16_t atavalid; /* fields valid */
|
|
#define ATA_FLAG_54_58 0x0001 /* words 54-58 valid */
|
|
#define ATA_FLAG_64_70 0x0002 /* words 64-70 valid */
|
|
#define ATA_FLAG_88 0x0004 /* word 88 valid */
|
|
|
|
/*054*/ u_int16_t obsolete54[5];
|
|
/*059*/ u_int16_t multi;
|
|
#define ATA_MULTI_VALID 0x0100
|
|
|
|
/*060*/ u_int16_t lba_size_1;
|
|
u_int16_t lba_size_2;
|
|
u_int16_t obsolete62;
|
|
/*063*/ u_int16_t mwdmamodes; /* multiword DMA modes */
|
|
/*064*/ u_int16_t apiomodes; /* advanced PIO modes */
|
|
|
|
/*065*/ u_int16_t mwdmamin; /* min. M/W DMA time/word ns */
|
|
/*066*/ u_int16_t mwdmarec; /* rec. M/W DMA time ns */
|
|
/*067*/ u_int16_t pioblind; /* min. PIO cycle w/o flow */
|
|
/*068*/ u_int16_t pioiordy; /* min. PIO cycle IORDY flow */
|
|
u_int16_t reserved69;
|
|
u_int16_t reserved70;
|
|
/*071*/ u_int16_t rlsovlap; /* rel time (us) for overlap */
|
|
/*072*/ u_int16_t rlsservice; /* rel time (us) for service */
|
|
u_int16_t reserved73;
|
|
u_int16_t reserved74;
|
|
/*075*/ u_int16_t queue;
|
|
#define ATA_QUEUE_LEN(x) ((x) & 0x001f)
|
|
|
|
u_int16_t satacapabilities;
|
|
#define ATA_SATA_GEN1 0x0002
|
|
#define ATA_SATA_GEN2 0x0004
|
|
#define ATA_SUPPORT_NCQ 0x0100
|
|
#define ATA_SUPPORT_IFPWRMNGTRCV 0x0200
|
|
|
|
u_int16_t reserved77;
|
|
u_int16_t satasupport;
|
|
#define ATA_SUPPORT_NONZERO 0x0002
|
|
#define ATA_SUPPORT_AUTOACTIVATE 0x0004
|
|
#define ATA_SUPPORT_IFPWRMNGT 0x0008
|
|
#define ATA_SUPPORT_INORDERDATA 0x0010
|
|
u_int16_t sataenabled;
|
|
|
|
/*080*/ u_int16_t version_major;
|
|
/*081*/ u_int16_t version_minor;
|
|
|
|
struct {
|
|
/*082/085*/ u_int16_t command1;
|
|
#define ATA_SUPPORT_SMART 0x0001
|
|
#define ATA_SUPPORT_SECURITY 0x0002
|
|
#define ATA_SUPPORT_REMOVABLE 0x0004
|
|
#define ATA_SUPPORT_POWERMGT 0x0008
|
|
#define ATA_SUPPORT_PACKET 0x0010
|
|
#define ATA_SUPPORT_WRITECACHE 0x0020
|
|
#define ATA_SUPPORT_LOOKAHEAD 0x0040
|
|
#define ATA_SUPPORT_RELEASEIRQ 0x0080
|
|
#define ATA_SUPPORT_SERVICEIRQ 0x0100
|
|
#define ATA_SUPPORT_RESET 0x0200
|
|
#define ATA_SUPPORT_PROTECTED 0x0400
|
|
#define ATA_SUPPORT_WRITEBUFFER 0x1000
|
|
#define ATA_SUPPORT_READBUFFER 0x2000
|
|
#define ATA_SUPPORT_NOP 0x4000
|
|
|
|
/*083/086*/ u_int16_t command2;
|
|
#define ATA_SUPPORT_MICROCODE 0x0001
|
|
#define ATA_SUPPORT_QUEUED 0x0002
|
|
#define ATA_SUPPORT_CFA 0x0004
|
|
#define ATA_SUPPORT_APM 0x0008
|
|
#define ATA_SUPPORT_NOTIFY 0x0010
|
|
#define ATA_SUPPORT_STANDBY 0x0020
|
|
#define ATA_SUPPORT_SPINUP 0x0040
|
|
#define ATA_SUPPORT_MAXSECURITY 0x0100
|
|
#define ATA_SUPPORT_AUTOACOUSTIC 0x0200
|
|
#define ATA_SUPPORT_ADDRESS48 0x0400
|
|
#define ATA_SUPPORT_OVERLAY 0x0800
|
|
#define ATA_SUPPORT_FLUSHCACHE 0x1000
|
|
#define ATA_SUPPORT_FLUSHCACHE48 0x2000
|
|
|
|
/*084/087*/ u_int16_t extension;
|
|
} support, enabled;
|
|
|
|
/*088*/ u_int16_t udmamodes; /* UltraDMA modes */
|
|
/*089*/ u_int16_t erase_time;
|
|
/*090*/ u_int16_t enhanced_erase_time;
|
|
/*091*/ u_int16_t apm_value;
|
|
/*092*/ u_int16_t master_passwd_revision;
|
|
/*093*/ u_int16_t hwres;
|
|
#define ATA_CABLE_ID 0x2000
|
|
|
|
/*094*/ u_int16_t acoustic;
|
|
#define ATA_ACOUSTIC_CURRENT(x) ((x) & 0x00ff)
|
|
#define ATA_ACOUSTIC_VENDOR(x) (((x) & 0xff00) >> 8)
|
|
|
|
/*095*/ u_int16_t stream_min_req_size;
|
|
/*096*/ u_int16_t stream_transfer_time;
|
|
/*097*/ u_int16_t stream_access_latency;
|
|
/*098*/ u_int32_t stream_granularity;
|
|
/*100*/ u_int16_t lba_size48_1;
|
|
u_int16_t lba_size48_2;
|
|
u_int16_t lba_size48_3;
|
|
u_int16_t lba_size48_4;
|
|
u_int16_t reserved104[23];
|
|
/*127*/ u_int16_t removable_status;
|
|
/*128*/ u_int16_t security_status;
|
|
u_int16_t reserved129[31];
|
|
/*160*/ u_int16_t cfa_powermode1;
|
|
u_int16_t reserved161[14];
|
|
/*176*/ u_int16_t media_serial[30];
|
|
u_int16_t reserved206[49];
|
|
/*255*/ u_int16_t integrity;
|
|
};
|
|
|
|
/* ATA transfer modes */
|
|
#define ATA_MODE_MASK 0x0f
|
|
#define ATA_DMA_MASK 0xf0
|
|
#define ATA_PIO 0x00
|
|
#define ATA_PIO0 0x08
|
|
#define ATA_PIO1 0x09
|
|
#define ATA_PIO2 0x0a
|
|
#define ATA_PIO3 0x0b
|
|
#define ATA_PIO4 0x0c
|
|
#define ATA_PIO_MAX 0x0f
|
|
#define ATA_DMA 0x10
|
|
#define ATA_WDMA0 0x20
|
|
#define ATA_WDMA1 0x21
|
|
#define ATA_WDMA2 0x22
|
|
#define ATA_UDMA0 0x40
|
|
#define ATA_UDMA1 0x41
|
|
#define ATA_UDMA2 0x42
|
|
#define ATA_UDMA3 0x43
|
|
#define ATA_UDMA4 0x44
|
|
#define ATA_UDMA5 0x45
|
|
#define ATA_UDMA6 0x46
|
|
#define ATA_SA150 0x47
|
|
#define ATA_DMA_MAX 0x4f
|
|
|
|
/* ATA commands */
|
|
#define ATA_NOP 0x00 /* NOP command */
|
|
#define ATA_NF_FLUSHQUEUE 0x00 /* flush queued cmd's */
|
|
#define ATA_NF_AUTOPOLL 0x01 /* start autopoll function */
|
|
#define ATA_ATAPI_RESET 0x08 /* reset ATAPI device */
|
|
#define ATA_READ 0x20 /* read command */
|
|
#define ATA_READ48 0x24 /* read command */
|
|
#define ATA_READ_DMA48 0x25 /* read w/DMA command */
|
|
#define ATA_READ_DMA_QUEUED48 0x26 /* read w/DMA QUEUED command */
|
|
#define ATA_READ_MUL48 0x29 /* read multi command */
|
|
#define ATA_WRITE 0x30 /* write command */
|
|
#define ATA_WRITE48 0x34 /* write command */
|
|
#define ATA_WRITE_DMA48 0x35 /* write w/DMA command */
|
|
#define ATA_WRITE_DMA_QUEUED48 0x36 /* write w/DMA QUEUED command */
|
|
#define ATA_WRITE_MUL48 0x39 /* write multi command */
|
|
#define ATA_PACKET_CMD 0xa0 /* packet command */
|
|
#define ATA_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/
|
|
#define ATA_SERVICE 0xa2 /* service command */
|
|
#define ATA_READ_MUL 0xc4 /* read multi command */
|
|
#define ATA_WRITE_MUL 0xc5 /* write multi command */
|
|
#define ATA_SET_MULTI 0xc6 /* set multi size command */
|
|
#define ATA_READ_DMA_QUEUED 0xc7 /* read w/DMA QUEUED command */
|
|
#define ATA_READ_DMA 0xc8 /* read w/DMA command */
|
|
#define ATA_WRITE_DMA 0xca /* write w/DMA command */
|
|
#define ATA_WRITE_DMA_QUEUED 0xcc /* write w/DMA QUEUED command */
|
|
#define ATA_SLEEP 0xe6 /* sleep command */
|
|
#define ATA_FLUSHCACHE 0xe7 /* flush cache to disk */
|
|
#define ATA_FLUSHCACHE48 0xea /* flush cache to disk */
|
|
#define ATA_ATA_IDENTIFY 0xec /* get ATA params */
|
|
#define ATA_SETFEATURES 0xef /* features command */
|
|
#define ATA_SF_SETXFER 0x03 /* set transfer mode */
|
|
#define ATA_SF_ENAB_WCACHE 0x02 /* enable write cache */
|
|
#define ATA_SF_DIS_WCACHE 0x82 /* disable write cache */
|
|
#define ATA_SF_ENAB_RCACHE 0xaa /* enable readahead cache */
|
|
#define ATA_SF_DIS_RCACHE 0x55 /* disable readahead cache */
|
|
#define ATA_SF_ENAB_RELIRQ 0x5d /* enable release interrupt */
|
|
#define ATA_SF_DIS_RELIRQ 0xdd /* disable release interrupt */
|
|
#define ATA_SF_ENAB_SRVIRQ 0x5e /* enable service interrupt */
|
|
#define ATA_SF_DIS_SRVIRQ 0xde /* disable service interrupt */
|
|
|
|
/* ATAPI commands */
|
|
#define ATAPI_TEST_UNIT_READY 0x00 /* check if device is ready */
|
|
#define ATAPI_REZERO 0x01 /* rewind */
|
|
#define ATAPI_REQUEST_SENSE 0x03 /* get sense data */
|
|
#define ATAPI_FORMAT 0x04 /* format unit */
|
|
#define ATAPI_READ 0x08 /* read data */
|
|
#define ATAPI_WRITE 0x0a /* write data */
|
|
#define ATAPI_WEOF 0x10 /* write filemark */
|
|
#define ATAPI_WF_WRITE 0x01
|
|
#define ATAPI_SPACE 0x11 /* space command */
|
|
#define ATAPI_SP_FM 0x01
|
|
#define ATAPI_SP_EOD 0x03
|
|
#define ATAPI_MODE_SELECT 0x15 /* mode select */
|
|
#define ATAPI_ERASE 0x19 /* erase */
|
|
#define ATAPI_MODE_SENSE 0x1a /* mode sense */
|
|
#define ATAPI_START_STOP 0x1b /* start/stop unit */
|
|
#define ATAPI_SS_LOAD 0x01
|
|
#define ATAPI_SS_RETENSION 0x02
|
|
#define ATAPI_SS_EJECT 0x04
|
|
#define ATAPI_PREVENT_ALLOW 0x1e /* media removal */
|
|
#define ATAPI_READ_FORMAT_CAPACITIES 0x23 /* get format capacities */
|
|
#define ATAPI_READ_CAPACITY 0x25 /* get volume capacity */
|
|
#define ATAPI_READ_BIG 0x28 /* read data */
|
|
#define ATAPI_WRITE_BIG 0x2a /* write data */
|
|
#define ATAPI_LOCATE 0x2b /* locate to position */
|
|
#define ATAPI_READ_POSITION 0x34 /* read position */
|
|
#define ATAPI_SYNCHRONIZE_CACHE 0x35 /* flush buf, close channel */
|
|
#define ATAPI_WRITE_BUFFER 0x3b /* write device buffer */
|
|
#define ATAPI_READ_BUFFER 0x3c /* read device buffer */
|
|
#define ATAPI_READ_SUBCHANNEL 0x42 /* get subchannel info */
|
|
#define ATAPI_READ_TOC 0x43 /* get table of contents */
|
|
#define ATAPI_PLAY_10 0x45 /* play by lba */
|
|
#define ATAPI_PLAY_MSF 0x47 /* play by MSF address */
|
|
#define ATAPI_PLAY_TRACK 0x48 /* play by track number */
|
|
#define ATAPI_PAUSE 0x4b /* pause audio operation */
|
|
#define ATAPI_READ_DISK_INFO 0x51 /* get disk info structure */
|
|
#define ATAPI_READ_TRACK_INFO 0x52 /* get track info structure */
|
|
#define ATAPI_RESERVE_TRACK 0x53 /* reserve track */
|
|
#define ATAPI_SEND_OPC_INFO 0x54 /* send OPC structurek */
|
|
#define ATAPI_MODE_SELECT_BIG 0x55 /* set device parameters */
|
|
#define ATAPI_REPAIR_TRACK 0x58 /* repair track */
|
|
#define ATAPI_READ_MASTER_CUE 0x59 /* read master CUE info */
|
|
#define ATAPI_MODE_SENSE_BIG 0x5a /* get device parameters */
|
|
#define ATAPI_CLOSE_TRACK 0x5b /* close track/session */
|
|
#define ATAPI_READ_BUFFER_CAPACITY 0x5c /* get buffer capicity */
|
|
#define ATAPI_SEND_CUE_SHEET 0x5d /* send CUE sheet */
|
|
#define ATAPI_BLANK 0xa1 /* blank the media */
|
|
#define ATAPI_SEND_KEY 0xa3 /* send DVD key structure */
|
|
#define ATAPI_REPORT_KEY 0xa4 /* get DVD key structure */
|
|
#define ATAPI_PLAY_12 0xa5 /* play by lba */
|
|
#define ATAPI_LOAD_UNLOAD 0xa6 /* changer control command */
|
|
#define ATAPI_READ_STRUCTURE 0xad /* get DVD structure */
|
|
#define ATAPI_PLAY_CD 0xb4 /* universal play command */
|
|
#define ATAPI_SET_SPEED 0xbb /* set drive speed */
|
|
#define ATAPI_MECH_STATUS 0xbd /* get changer status */
|
|
#define ATAPI_READ_CD 0xbe /* read data */
|
|
#define ATAPI_POLL_DSC 0xff /* poll DSC status bit */
|
|
|
|
struct ata_cmd {
|
|
int channel;
|
|
int device;
|
|
int cmd;
|
|
#define ATAGMAXCHANNEL 0x0101
|
|
#define ATAGPARM 0x0102
|
|
#define ATAGMODE 0x0103
|
|
#define ATASMODE 0x0104
|
|
#define ATAREQUEST 0x0108
|
|
#define ATAREINIT 0x0110
|
|
#define ATAATTACH 0x0111
|
|
#define ATADETACH 0x0112
|
|
#define ATARAIDCREATE 0x0120
|
|
#define ATARAIDDELETE 0x0121
|
|
#define ATARAIDSTATUS 0x0122
|
|
#define ATARAIDADDSPARE 0x0123
|
|
#define ATARAIDREBUILD 0x0124
|
|
#define ATAENCSTAT 0x0130
|
|
|
|
union {
|
|
int maxchan;
|
|
|
|
struct {
|
|
int type[2];
|
|
char name[2][32];
|
|
struct ata_params params[2];
|
|
} param;
|
|
|
|
struct {
|
|
int mode[2];
|
|
} mode;
|
|
|
|
struct {
|
|
union {
|
|
struct {
|
|
u_int8_t command;
|
|
u_int8_t feature;
|
|
u_int64_t lba;
|
|
u_int16_t count;
|
|
} ata;
|
|
struct {
|
|
char ccb[16];
|
|
} atapi;
|
|
} u;
|
|
caddr_t data;
|
|
int count;
|
|
int flags;
|
|
#define ATA_CMD_CONTROL 0x01
|
|
#define ATA_CMD_READ 0x02
|
|
#define ATA_CMD_WRITE 0x04
|
|
#define ATA_CMD_ATAPI 0x08
|
|
|
|
int timeout;
|
|
int error;
|
|
} request;
|
|
|
|
struct raid_setup {
|
|
int type;
|
|
#define AR_RAID0 1
|
|
#define AR_RAID1 2
|
|
#define AR_SPAN 4
|
|
|
|
int total_disks;
|
|
int disks[16];
|
|
int interleave;
|
|
int unit;
|
|
} raid_setup;
|
|
|
|
struct raid_status {
|
|
int type;
|
|
int total_disks;
|
|
int disks[16];
|
|
int interleave;
|
|
int status;
|
|
#define AR_READY 1
|
|
#define AR_DEGRADED 2
|
|
#define AR_REBUILDING 4
|
|
|
|
int progress;
|
|
} raid_status;
|
|
|
|
struct {
|
|
int disk;
|
|
} raid_spare;
|
|
|
|
struct {
|
|
int fan;
|
|
int temp;
|
|
int v05;
|
|
int v12;
|
|
} enclosure;
|
|
} u;
|
|
};
|
|
|
|
#define IOCATA _IOWR('a', 1, struct ata_cmd)
|
|
|
|
#endif /* _SYS_ATA_H_ */
|