183 lines
5.1 KiB
Groff
183 lines
5.1 KiB
Groff
.\" Copyright (c) 1995 Comtrol, Inc.
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.Dd November 15, 1995
|
|
.Os
|
|
.Dt RP 4
|
|
.Sh NAME
|
|
.Nm rp
|
|
.Nd "driver for Comtrol RocketPort Intelligent Serial Port Cards"
|
|
.Sh SYNOPSIS
|
|
.Cd "device rp"
|
|
.Cd "device rp0 at isa? port 0x180"
|
|
.Sh DESCRIPTION
|
|
This driver provides a kernel device driver for the
|
|
.Tn RocketPort
|
|
and
|
|
.Tn RocketPort RA
|
|
serial boards.
|
|
These boards provide 8, 16, or 32 high-speed serial ports
|
|
while requiring only 68 bytes of I/O space for all 8, 16,
|
|
or 32 ports, and do not require an interrupt channel.
|
|
This driver supports up to four
|
|
.Tn RocketPort
|
|
or
|
|
.Tn RocketPort RA
|
|
boards in one machine simultaneously.
|
|
If you are using four 32 port
|
|
.Tn RocketPort
|
|
boards, you can put as many as 128 intelligent serial ports
|
|
on your system.
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver supports the following speeds: 50, 75, 110, 134, 150,
|
|
200, 300, 600, 1200, 1800, 2400, 4800, 9600, 19200, 38400, 7200,
|
|
14400, 57600, 76800, 115200, and 230400.
|
|
(You must use
|
|
.Xr termios 4 ,
|
|
rather than the old style ioctl interface to use non-traditional
|
|
speeds.)
|
|
.Pp
|
|
An open on the
|
|
.Nm
|
|
driver will block until carrier is present, unless
|
|
.Dv O_NONBLOCK
|
|
or
|
|
.Dv CLOCAL
|
|
is set.
|
|
.Sh HARDWARE CONFIGURATION
|
|
The first
|
|
.Tn RocketPort
|
|
or
|
|
.Tn RocketPort RA
|
|
card requires a 68-byte contiguous block of I/O addresses,
|
|
starting at one of the following:
|
|
0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h, 0x300h, 0x340h,
|
|
0x380h.
|
|
The second, third, and fourth
|
|
.Tn RocketPort
|
|
cards require only a
|
|
64-byte contiguous block of I/O addresses, starting at one of the
|
|
above address ranges.
|
|
The I/O address range used by any of the
|
|
.Tn RocketPort
|
|
cards must not conflict with any other cards in the system,
|
|
including other
|
|
.Tn RocketPort
|
|
cards.
|
|
The starting range of the I/O ports used by each card
|
|
must match with the I/O address specified in the kernel
|
|
configuration file.
|
|
.Pp
|
|
Since the first
|
|
.Tn RocketPort
|
|
uses 68 I/O addresses, if the first card is
|
|
set to use an I/O block starting at 0x100,
|
|
it will occupy the I/O ports between 0x100 and 0x143.
|
|
This means that the second, third, or fourth
|
|
.Tn RocketPort
|
|
board may not use the block of addresses starting at 0x140,
|
|
since the first three I/O addresses of that range
|
|
are used by the first board.
|
|
This is an important point to keep in mind.
|
|
.Pp
|
|
The configuration of the
|
|
.Tn RocketPort
|
|
cards is done via the set of 8 DIP switches,
|
|
labeled SW1 on the
|
|
.Tn RocketPort
|
|
card:
|
|
.Bd -literal -offset indent
|
|
+-------------------------------+
|
|
| 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
|
|
+-------+-------+---------------+
|
|
| Unused| Card | I/O Port Block|
|
|
+-------------------------------+
|
|
.Ed
|
|
.Pp
|
|
DIP switches 7 and 8 are unused, and must be left on.
|
|
.Pp
|
|
DIP switches 6 and 5 identify the card number of each
|
|
.Tn RocketPort
|
|
card.
|
|
The first card installed in the system must have its DIP switches set
|
|
as card number one; the second card installed in the system must have
|
|
its DIP switches set as card number two; and so on.
|
|
As shipped from
|
|
the factory, DIP switches 6 and 5 are both on by default, indicating
|
|
that it is first card installed on the system:
|
|
.Bd -literal -offset indent
|
|
DIP Switches
|
|
6 5
|
|
===================
|
|
On On First Card
|
|
On Off Second Card
|
|
Off On Third Card
|
|
Off Off Fourth Card
|
|
.Ed
|
|
.Pp
|
|
DIP switches 4, 3, 2, and 1 indicate the I/O address range used by the
|
|
first
|
|
.Tn RocketPort
|
|
card.
|
|
If there are more than one
|
|
.Tn RocketPort
|
|
card installed in a system,
|
|
the second, third and fourth
|
|
.Tn RocketPort
|
|
cards must
|
|
also be set to the I/O address range used by the first
|
|
.Tn RocketPort
|
|
card;
|
|
all cards must have these DIP switches set identically
|
|
for proper operation.
|
|
As shipped from the factory, DIP switch 4 is on,
|
|
and switches 3, 2, and 1 are off by default,
|
|
indicating an I/O address range used by the first
|
|
card which starts at 0x180 and extends to 0x1C3.
|
|
.Bd -literal -offset indent
|
|
DIP Switches I/O Address Range
|
|
4 3 2 1 Used by the First Card
|
|
=====================================
|
|
On Off On Off 100-143
|
|
On Off Off On 140-183
|
|
On Off Off Off 180-1C3
|
|
Off On On Off 200-243
|
|
Off On Off On 240-283
|
|
Off On Off Off 280-2C3
|
|
Off Off On Off 300-343
|
|
Off Off Off On 340-383
|
|
Off Off Off Off 380-3C3
|
|
.Ed
|
|
.Sh FILES
|
|
.Bl -tag -width ".Pa /dev/ttyR[RSTU][0-31]"
|
|
.It Pa /dev/ttyR[RSTU][0-31]
|
|
.El
|
|
.Sh AUTHORS
|
|
.An Theodore Ts'o Aq tytso@mit.edu
|
|
.Pp
|
|
This driver was written under contract for Comtrol Corporation.
|
|
For dealer, distributor and other information regarding Comtrol
|
|
.Tn RocketPort ,
|
|
contact Comtrol Corporation at (800) 926-6876 or send email to
|
|
.Aq info@comtrol.com .
|
|
To report bugs for this driver, please send email to
|
|
.Aq bug-bsdi-rocketport@comtrol.com .
|
|
.Sh BUGS
|
|
If incoming software flow control is enabled on a 486 or Pentium
|
|
machine, and the flow control is very heavily exercised, on rare occasions
|
|
a character will get dropped.
|
|
This problem does not occur on a 386, and
|
|
it is not currently known whether the bug is in the
|
|
.Nm
|
|
driver
|
|
or in the
|
|
.Bsx
|
|
tty layer.
|
|
.\" (Although my bet is that it's in the higher-level tty layer;
|
|
.\" given the bugs I found while writing this driver, it's clear
|
|
.\" the BSD software flow control code hasn't been tested very much
|
|
.\" at all! -- TYT)
|