4297664797
commands sent to card, into the base driver module. It is now used for EISA board probes too.
276 lines
7.3 KiB
C
276 lines
7.3 KiB
C
/*
|
|
* Product specific probe and attach routines for:
|
|
* Buslogic BT-54X and BT-445 cards
|
|
*
|
|
* Copyright (c) 1998, 1999 Justin T. Gibbs
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $Id: bt_isa.c,v 1.5 1998/11/10 06:44:54 gibbs Exp $
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <i386/isa/isa_device.h>
|
|
#include <dev/buslogic/btreg.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
|
|
static int bt_isa_probe __P((struct isa_device *dev));
|
|
static int bt_isa_attach __P((struct isa_device *dev));
|
|
static void bt_isa_intr __P((void *unit));
|
|
|
|
static bus_dma_filter_t btvlbouncefilter;
|
|
static bus_dmamap_callback_t btmapsensebuffers;
|
|
|
|
struct isa_driver btdriver =
|
|
{
|
|
bt_isa_probe,
|
|
bt_isa_attach,
|
|
"bt"
|
|
};
|
|
|
|
/*
|
|
* Check if the device can be found at the port given
|
|
* and if so, set it up ready for further work
|
|
* as an argument, takes the isa_device structure from
|
|
* autoconf.c
|
|
*/
|
|
static int
|
|
bt_isa_probe(dev)
|
|
struct isa_device *dev;
|
|
{
|
|
/*
|
|
* find unit and check we have that many defined
|
|
*/
|
|
struct bt_softc *bt;
|
|
int port_index;
|
|
int max_port_index;
|
|
|
|
/*
|
|
* We ignore the unit number assigned by config to allow
|
|
* consistant numbering between PCI/EISA/ISA devices.
|
|
* This is a total kludge until we have a configuration
|
|
* manager.
|
|
*/
|
|
dev->id_unit = bt_unit;
|
|
|
|
bt = NULL;
|
|
port_index = 0;
|
|
max_port_index = BT_NUM_ISAPORTS - 1;
|
|
/*
|
|
* Bound our board search if the user has
|
|
* specified an exact port.
|
|
*/
|
|
bt_find_probe_range(dev->id_iobase, &port_index, &max_port_index);
|
|
|
|
if (port_index < 0)
|
|
return 0;
|
|
|
|
/* Attempt to find an adapter */
|
|
for (;port_index <= max_port_index; port_index++) {
|
|
struct bt_probe_info info;
|
|
u_int ioport;
|
|
|
|
ioport = bt_iop_from_bio(port_index);
|
|
|
|
/*
|
|
* Ensure this port has not already been claimed already
|
|
* by a PCI, EISA or ISA adapter.
|
|
*/
|
|
if (bt_check_probed_iop(ioport) != 0)
|
|
continue;
|
|
dev->id_iobase = ioport;
|
|
if (haveseen_isadev(dev, CC_IOADDR | CC_QUIET))
|
|
continue;
|
|
|
|
/* Allocate a softc for use during probing */
|
|
bt = bt_alloc(dev->id_unit, I386_BUS_SPACE_IO, ioport);
|
|
|
|
if (bt == NULL)
|
|
break;
|
|
|
|
/* We're going to attempt to probe it now, so mark it probed */
|
|
bt_mark_probed_bio(port_index);
|
|
|
|
if (bt_port_probe(bt, &info) != 0) {
|
|
printf("bt_isa_probe: Probe failled for card at 0x%x\n",
|
|
ioport);
|
|
bt_free(bt);
|
|
continue;
|
|
}
|
|
|
|
dev->id_drq = info.drq;
|
|
dev->id_irq = 0x1 << info.irq;
|
|
dev->id_intr = bt_isa_intr;
|
|
|
|
bt_unit++;
|
|
return (BT_NREGS);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Attach all the sub-devices we can find
|
|
*/
|
|
static int
|
|
bt_isa_attach(dev)
|
|
struct isa_device *dev;
|
|
{
|
|
struct bt_softc *bt;
|
|
bus_dma_filter_t *filter;
|
|
void *filter_arg;
|
|
bus_addr_t lowaddr;
|
|
|
|
bt = bt_softcs[dev->id_unit];
|
|
if (dev->id_drq != -1)
|
|
isa_dmacascade(dev->id_drq);
|
|
|
|
/* Allocate our parent dmatag */
|
|
filter = NULL;
|
|
filter_arg = NULL;
|
|
lowaddr = BUS_SPACE_MAXADDR_24BIT;
|
|
if (bt->model[0] == '4') {
|
|
/*
|
|
* This is a VL adapter. Typically, VL devices have access
|
|
* to the full 32bit address space. On BT-445S adapters
|
|
* prior to revision E, there is a hardware bug that causes
|
|
* corruption of transfers to/from addresses in the range of
|
|
* the BIOS modulo 16MB. The only properly functioning
|
|
* BT-445S Host Adapters have firmware version 3.37.
|
|
* If we encounter one of these adapters and the BIOS is
|
|
* installed, install a filter function for our bus_dma_map
|
|
* that will catch these accesses and bounce them to a safe
|
|
* region of memory.
|
|
*/
|
|
if (bt->bios_addr != 0
|
|
&& strcmp(bt->model, "445S") == 0
|
|
&& strcmp(bt->firmware_ver, "3.37") < 0) {
|
|
filter = btvlbouncefilter;
|
|
filter_arg = bt;
|
|
} else {
|
|
lowaddr = BUS_SPACE_MAXADDR_32BIT;
|
|
}
|
|
}
|
|
|
|
/* XXX Should be a child of the ISA or VL bus dma tag */
|
|
if (bus_dma_tag_create(/*parent*/NULL, /*alignemnt*/0, /*boundary*/0,
|
|
lowaddr, /*highaddr*/BUS_SPACE_MAXADDR,
|
|
filter, filter_arg,
|
|
/*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
|
|
/*nsegments*/BUS_SPACE_UNRESTRICTED,
|
|
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
|
|
/*flags*/0, &bt->parent_dmat) != 0) {
|
|
bt_free(bt);
|
|
return (-1);
|
|
}
|
|
|
|
if (bt_init(bt)) {
|
|
bt_free(bt);
|
|
return (-1);
|
|
}
|
|
|
|
if (lowaddr != BUS_SPACE_MAXADDR_32BIT) {
|
|
/* DMA tag for our sense buffers */
|
|
if (bus_dma_tag_create(bt->parent_dmat, /*alignment*/0,
|
|
/*boundary*/0,
|
|
/*lowaddr*/BUS_SPACE_MAXADDR,
|
|
/*highaddr*/BUS_SPACE_MAXADDR,
|
|
/*filter*/NULL, /*filterarg*/NULL,
|
|
bt->max_ccbs
|
|
* sizeof(struct scsi_sense_data),
|
|
/*nsegments*/1,
|
|
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
|
|
/*flags*/0, &bt->sense_dmat) != 0) {
|
|
bt_free(bt);
|
|
return (-1);
|
|
}
|
|
|
|
bt->init_level++;
|
|
|
|
/* Allocation of sense buffers */
|
|
if (bus_dmamem_alloc(bt->sense_dmat,
|
|
(void **)&bt->sense_buffers,
|
|
BUS_DMA_NOWAIT, &bt->sense_dmamap) != 0) {
|
|
bt_free(bt);
|
|
return (-1);
|
|
}
|
|
|
|
bt->init_level++;
|
|
|
|
/* And permanently map them */
|
|
bus_dmamap_load(bt->sense_dmat, bt->sense_dmamap,
|
|
bt->sense_buffers,
|
|
bt->max_ccbs * sizeof(*bt->sense_buffers),
|
|
btmapsensebuffers, bt, /*flags*/0);
|
|
|
|
bt->init_level++;
|
|
}
|
|
|
|
return (bt_attach(bt));
|
|
}
|
|
|
|
/*
|
|
* Handle an ISA interrupt.
|
|
* XXX should go away as soon as ISA interrupt handlers
|
|
* take a (void *) arg.
|
|
*/
|
|
static void
|
|
bt_isa_intr(void *unit)
|
|
{
|
|
struct bt_softc* arg = bt_softcs[(int)unit];
|
|
bt_intr((void *)arg);
|
|
}
|
|
|
|
#define BIOS_MAP_SIZE (16 * 1024)
|
|
|
|
static int
|
|
btvlbouncefilter(void *arg, bus_addr_t addr)
|
|
{
|
|
struct bt_softc *bt;
|
|
|
|
bt = (struct bt_softc *)arg;
|
|
|
|
addr &= BUS_SPACE_MAXADDR_24BIT;
|
|
|
|
if (addr == 0
|
|
|| (addr >= bt->bios_addr
|
|
&& addr < (bt->bios_addr + BIOS_MAP_SIZE)))
|
|
return (1);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
btmapsensebuffers(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct bt_softc* bt;
|
|
|
|
bt = (struct bt_softc*)arg;
|
|
bt->sense_buffers_physbase = segs->ds_addr;
|
|
}
|