freebsd-nq/sys/dev/cxgbe/firmware/t6fw_cfg.txt
Navdeep Parhar 305e7e925f cxgbe(4): Updates to the default and hashfilter configurations.
- Do not use nvf = 4 as it is not really supported by the firmware.
  Firmwares 1.23.3.0 and above will ignore it silently.
- Increase PF4's share of the VIs and let it use all of the RSS table.

MFC after:	2 weeks
Sponsored by:	Chelsio Communications
2019-02-25 16:28:13 +00:00

279 lines
5.8 KiB
Plaintext

# Firmware configuration file.
#
# Global limits (some are hardware limits, others are due to the firmware).
# nvi = 128 virtual interfaces
# niqflint = 1023 ingress queues with freelists and/or interrupts
# nethctrl = 64K Ethernet or ctrl egress queues
# neq = 64K egress queues of all kinds, including freelists
# nexactf = 512 MPS TCAM entries, can oversubscribe.
[global]
rss_glb_config_mode = basicvirtual
rss_glb_config_options = tnlmapen,hashtoeplitz,tnlalllkp
# PL_TIMEOUT register
pl_timeout_value = 200 # the timeout value in units of us
sge_timer_value = 1, 5, 10, 50, 100, 200 # SGE_TIMER_VALUE* in usecs
reg[0x10c4] = 0x20000000/0x20000000 # GK_CONTROL, enable 5th thread
reg[0x7dc0] = 0x0e2f8849 # TP_SHIFT_CNT
#Tick granularities in kbps
tsch_ticks = 100000, 10000, 1000, 10
filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
filterMask = protocol
tp_pmrx = 36, 512
tp_pmrx_pagesize = 64K
# TP number of RX channels (0 = auto)
tp_nrxch = 0
tp_pmtx = 46, 512
tp_pmtx_pagesize = 64K
# TP number of TX channels (0 = auto)
tp_ntxch = 0
# TP OFLD MTUs
tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600
# enable TP_OUT_CONFIG.IPIDSPLITMODE and CRXPKTENC
reg[0x7d04] = 0x00010008/0x00010008
# TP_GLOBAL_CONFIG
reg[0x7d08] = 0x00000800/0x00000800 # set IssFromCplEnable
# TP_PC_CONFIG
reg[0x7d48] = 0x00000000/0x00000400 # clear EnableFLMError
# TP_PARA_REG0
reg[0x7d60] = 0x06000000/0x07000000 # set InitCWND to 6
# cluster, lan, or wan.
tp_tcptuning = lan
# LE_DB_CONFIG
reg[0x19c04] = 0x00000000/0x00440000 # LE Server SRAM disabled
# LE IPv4 compression disabled
# LE_DB_HASH_CONFIG
reg[0x19c28] = 0x00800000/0x01f00000 # LE Hash bucket size 8,
# ULP_TX_CONFIG
reg[0x8dc0] = 0x00000104/0x00000104 # Enable ITT on PI err
# Enable more error msg for ...
# TPT error.
# ULP_RX_MISC_FEATURE_ENABLE
#reg[0x1925c] = 0x01003400/0x01003400 # iscsi tag pi bit
# Enable offset decrement after ...
# PI extraction and before DDP
# ulp insert pi source info in DIF
# iscsi_eff_offset_en
#Enable iscsi completion moderation feature
reg[0x1925c] = 0x000041c0/0x000031c0 # Enable offset decrement after
# PI extraction and before DDP.
# ulp insert pi source info in
# DIF.
# Enable iscsi hdr cmd mode.
# iscsi force cmd mode.
# Enable iscsi cmp mode.
# MC configuration
#mc_mode_brc[0] = 1 # mc0 - 1: enable BRC, 0: enable RBC
# PFs 0-3. These get 8 MSI/8 MSI-X vectors each. VFs are supported by
# these 4 PFs only.
[function "0"]
wx_caps = all
r_caps = all
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x1
[function "1"]
wx_caps = all
r_caps = all
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x2
[function "2"]
wx_caps = all
r_caps = all
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x4
[function "3"]
wx_caps = all
r_caps = all
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x8
# PF4 is the resource-rich PF that the bus/nexus driver attaches to.
# It gets 32 MSI/128 MSI-X vectors.
[function "4"]
wx_caps = all
r_caps = all
nvi = 32
rssnvi = 32
niqflint = 512
nethctrl = 1024
neq = 2048
nqpcq = 8192
nexactf = 456
cmask = all
pmask = all
ncrypto_lookaside = 16
nclip = 320
nethofld = 8192
# TCAM has 6K cells; each region must start at a multiple of 128 cell.
# Each entry in these categories takes 2 cells each. nhash will use the
# TCAM iff there is room left (that is, the rest don't add up to 3072).
nfilter = 2032
nserver = 512
nhpfilter = 0
nhash = 16384
protocol = ofld, rddp, rdmac, iscsi_initiator_pdu, iscsi_target_pdu, iscsi_t10dif, tlskeys, crypto_lookaside
tp_l2t = 4096
tp_ddp = 2
tp_ddp_iscsi = 2
tp_tls_key = 3
tp_tls_mxrxsize = 17408 # 16384 + 1024, governs max rx data, pm max xfer len, rx coalesce sizes
tp_stag = 2
tp_pbl = 5
tp_rq = 7
tp_srq = 128
# PF5 is the SCSI Controller PF. It gets 32 MSI/40 MSI-X vectors.
# Not used right now.
[function "5"]
nvi = 1
rssnvi = 0
# PF6 is the FCoE Controller PF. It gets 32 MSI/40 MSI-X vectors.
# Not used right now.
[function "6"]
nvi = 1
rssnvi = 0
# The following function, 1023, is not an actual PCIE function but is used to
# configure and reserve firmware internal resources that come from the global
# resource pool.
#
[function "1023"]
wx_caps = all
r_caps = all
nvi = 4
rssnvi = 0
cmask = all
pmask = all
nexactf = 8
nfilter = 16
# For Virtual functions, we only allow NIC functionality and we only allow
# access to one port (1 << PF). Note that because of limitations in the
# Scatter Gather Engine (SGE) hardware which checks writes to VF KDOORBELL
# and GTS registers, the number of Ingress and Egress Queues must be a power
# of 2.
#
[function "0/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x1
[function "1/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x2
[function "2/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x1
[function "3/*"]
wx_caps = 0x82
r_caps = 0x86
nvi = 1
rssnvi = 0
niqflint = 2
nethctrl = 2
neq = 4
nexactf = 2
cmask = all
pmask = 0x2
# MPS has 192K buffer space for ingress packets from the wire as well as
# loopback path of the L2 switch.
[port "0"]
dcb = none
#bg_mem = 25
#lpbk_mem = 25
hwm = 60
lwm = 15
dwm = 30
[port "1"]
dcb = none
#bg_mem = 25
#lpbk_mem = 25
hwm = 60
lwm = 15
dwm = 30
[fini]
version = 0x1
checksum = 0x4528a6ac
#
# $FreeBSD$
#