f2972d7eb8
controllers (PDC203** PDC206**). This also adds preliminary support for the Promise SX4/SX4000 but *only* as a "normal" Promise ATA controller (ATA RAID's are supported though but only RAID0, RAID1 and RAID0+1). This cuts off yet another 5-8% of the command overhead on promise controllers, making them the fastest we have ever had support for. Work is now continuing to add support for this in ATA RAID, to accellerate ATA RAID quite a bit on these controllers, and especially the SX4/SX4000 series as they have quite a few tricks in there.. This commit also adds a few fixes to the SATA code needed for proper support.
991 lines
26 KiB
C
991 lines
26 KiB
C
/*-
|
|
* Copyright (c) 1998 - 2004 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/ctype.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sema.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <vm/uma.h>
|
|
#include <machine/stdarg.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#ifdef __alpha__
|
|
#include <machine/md_var.h>
|
|
#endif
|
|
#include <geom/geom_disk.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-disk.h>
|
|
#include <dev/ata/ata-raid.h>
|
|
|
|
/* device structures */
|
|
static d_ioctl_t ata_ioctl;
|
|
static struct cdevsw ata_cdevsw = {
|
|
.d_version = D_VERSION,
|
|
.d_flags = D_NEEDGIANT,
|
|
.d_ioctl = ata_ioctl,
|
|
.d_name = "ata",
|
|
};
|
|
|
|
/* prototypes */
|
|
static void ata_shutdown(void *, int);
|
|
static int ata_getparam(struct ata_device *, u_int8_t);
|
|
static void ata_identify_devices(struct ata_channel *);
|
|
static void ata_boot_attach(void);
|
|
static void bswap(int8_t *, int);
|
|
static void btrim(int8_t *, int);
|
|
static void bpack(int8_t *, int8_t *, int);
|
|
static void ata_init(void);
|
|
|
|
/* global vars */
|
|
MALLOC_DEFINE(M_ATA, "ATA generic", "ATA driver generic layer");
|
|
struct intr_config_hook *ata_delayed_attach = NULL;
|
|
devclass_t ata_devclass;
|
|
uma_zone_t ata_zone;
|
|
int ata_wc = 1;
|
|
|
|
/* local vars */
|
|
static int ata_dma = 1;
|
|
static int atapi_dma = 0;
|
|
|
|
/* sysctl vars */
|
|
SYSCTL_NODE(_hw, OID_AUTO, ata, CTLFLAG_RD, 0, "ATA driver parameters");
|
|
TUNABLE_INT("hw.ata.ata_dma", &ata_dma);
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, ata_dma, CTLFLAG_RDTUN, &ata_dma, 0,
|
|
"ATA disk DMA mode control");
|
|
TUNABLE_INT("hw.ata.wc", &ata_wc);
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, wc, CTLFLAG_RDTUN, &ata_wc, 0,
|
|
"ATA disk write caching");
|
|
TUNABLE_INT("hw.ata.atapi_dma", &atapi_dma);
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, atapi_dma, CTLFLAG_RDTUN, &atapi_dma, 0,
|
|
"ATAPI device DMA mode control");
|
|
|
|
/*
|
|
* newbus device interface related functions
|
|
*/
|
|
int
|
|
ata_probe(device_t dev)
|
|
{
|
|
struct ata_channel *ch;
|
|
|
|
if (!dev || !(ch = device_get_softc(dev)))
|
|
return ENXIO;
|
|
|
|
if (ch->r_irq)
|
|
return EEXIST;
|
|
|
|
/* initialize the softc basics */
|
|
ch->device[MASTER].channel = ch;
|
|
ch->device[MASTER].unit = ATA_MASTER;
|
|
ch->device[MASTER].mode = ATA_PIO;
|
|
ch->device[SLAVE].channel = ch;
|
|
ch->device[SLAVE].unit = ATA_SLAVE;
|
|
ch->device[SLAVE].mode = ATA_PIO;
|
|
ch->dev = dev;
|
|
ch->state = ATA_IDLE;
|
|
|
|
/* initialise device(s) on this channel */
|
|
ch->locking(ch, ATA_LF_LOCK);
|
|
ch->hw.reset(ch);
|
|
ch->locking(ch, ATA_LF_UNLOCK);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ata_attach(device_t dev)
|
|
{
|
|
struct ata_channel *ch;
|
|
int error, rid;
|
|
|
|
if (!dev || !(ch = device_get_softc(dev)))
|
|
return ENXIO;
|
|
|
|
rid = ATA_IRQ_RID;
|
|
ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (!ch->r_irq) {
|
|
ata_printf(ch, -1, "unable to allocate interrupt\n");
|
|
return ENXIO;
|
|
}
|
|
if ((error = bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS,
|
|
ch->hw.interrupt, ch, &ch->ih))) {
|
|
ata_printf(ch, -1, "unable to setup interrupt\n");
|
|
return error;
|
|
}
|
|
|
|
if (ch->dma)
|
|
ch->dma->alloc(ch);
|
|
|
|
/* initialize queue and associated lock */
|
|
bzero(&ch->queue_mtx, sizeof(struct mtx));
|
|
mtx_init(&ch->queue_mtx, "ATA queue lock", MTX_DEF, 0);
|
|
TAILQ_INIT(&ch->ata_queue);
|
|
|
|
/* do not attach devices if we are in early boot */
|
|
if (ata_delayed_attach)
|
|
return 0;
|
|
|
|
ata_identify_devices(ch);
|
|
|
|
if (ch->device[MASTER].attach)
|
|
ch->device[MASTER].attach(&ch->device[MASTER]);
|
|
if (ch->device[SLAVE].attach)
|
|
ch->device[SLAVE].attach(&ch->device[SLAVE]);
|
|
#ifdef DEV_ATAPICAM
|
|
atapi_cam_attach_bus(ch);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ata_detach(device_t dev)
|
|
{
|
|
struct ata_channel *ch;
|
|
|
|
if (!dev || !(ch = device_get_softc(dev)) || !ch->r_irq)
|
|
return ENXIO;
|
|
|
|
/* detach devices on this channel */
|
|
if (ch->device[MASTER].detach)
|
|
ch->device[MASTER].detach(&ch->device[MASTER]);
|
|
if (ch->device[SLAVE].detach)
|
|
ch->device[SLAVE].detach(&ch->device[SLAVE]);
|
|
#ifdef DEV_ATAPICAM
|
|
atapi_cam_detach_bus(ch);
|
|
#endif
|
|
|
|
/* fail outstanding requests on this channel */
|
|
ata_fail_requests(ch, NULL);
|
|
|
|
/* flush cache and powerdown device */
|
|
if (ch->device[MASTER].param) {
|
|
if (ch->device[MASTER].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
|
|
ata_controlcmd(&ch->device[MASTER], ATA_FLUSHCACHE, 0, 0, 0);
|
|
ata_controlcmd(&ch->device[MASTER], ATA_SLEEP, 0, 0, 0);
|
|
free(ch->device[MASTER].param, M_ATA);
|
|
ch->device[MASTER].param = NULL;
|
|
}
|
|
if (ch->device[SLAVE].param) {
|
|
if (ch->device[SLAVE].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
|
|
ata_controlcmd(&ch->device[SLAVE], ATA_FLUSHCACHE, 0, 0, 0);
|
|
ata_controlcmd(&ch->device[SLAVE], ATA_SLEEP, 0, 0, 0);
|
|
free(ch->device[SLAVE].param, M_ATA);
|
|
ch->device[SLAVE].param = NULL;
|
|
}
|
|
ch->device[MASTER].mode = ATA_PIO;
|
|
ch->device[SLAVE].mode = ATA_PIO;
|
|
ch->devices = 0;
|
|
|
|
if (ch->dma)
|
|
ch->dma->free(ch);
|
|
|
|
bus_teardown_intr(dev, ch->r_irq, ch->ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
|
|
ch->r_irq = NULL;
|
|
mtx_destroy(&ch->queue_mtx);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ata_reinit(struct ata_channel *ch)
|
|
{
|
|
struct ata_request *request = ch->running;
|
|
int devices, misdev, newdev;
|
|
|
|
if (!ch->r_irq)
|
|
return ENXIO;
|
|
|
|
/* reset the HW */
|
|
if (bootverbose)
|
|
ata_printf(ch, -1, "reiniting channel ..\n");
|
|
ATA_FORCELOCK_CH(ch, ATA_CONTROL);
|
|
ch->flags |= ATA_IMMEDIATE_MODE;
|
|
ch->running = NULL;
|
|
devices = ch->devices;
|
|
ch->hw.reset(ch);
|
|
ATA_UNLOCK_CH(ch);
|
|
|
|
if (bootverbose)
|
|
ata_printf(ch, -1, "resetting done ..\n");
|
|
|
|
/* detach what left the channel during reset */
|
|
if ((misdev = devices & ~ch->devices)) {
|
|
if ((misdev & (ATA_ATA_MASTER | ATA_ATAPI_MASTER)) &&
|
|
ch->device[MASTER].detach) {
|
|
if (request && (request->device == &ch->device[MASTER])) {
|
|
request->result = ENXIO;
|
|
request->retries = 0;
|
|
}
|
|
ch->device[MASTER].detach(&ch->device[MASTER]);
|
|
ata_fail_requests(ch, &ch->device[MASTER]);
|
|
free(ch->device[MASTER].param, M_ATA);
|
|
ch->device[MASTER].param = NULL;
|
|
}
|
|
if ((misdev & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE)) &&
|
|
ch->device[SLAVE].detach) {
|
|
if (request && (request->device == &ch->device[SLAVE])) {
|
|
request->result = ENXIO;
|
|
request->retries = 0;
|
|
}
|
|
ch->device[SLAVE].detach(&ch->device[SLAVE]);
|
|
ata_fail_requests(ch, &ch->device[SLAVE]);
|
|
free(ch->device[SLAVE].param, M_ATA);
|
|
ch->device[SLAVE].param = NULL;
|
|
}
|
|
}
|
|
|
|
/* identify what is present on the channel now */
|
|
ata_identify_devices(ch);
|
|
|
|
/* attach new devices that appeared during reset */
|
|
if ((newdev = ~devices & ch->devices)) {
|
|
if ((newdev & (ATA_ATA_MASTER | ATA_ATAPI_MASTER)) &&
|
|
ch->device[MASTER].attach)
|
|
ch->device[MASTER].attach(&ch->device[MASTER]);
|
|
if ((newdev & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE)) &&
|
|
ch->device[SLAVE].attach)
|
|
ch->device[SLAVE].attach(&ch->device[SLAVE]);
|
|
}
|
|
|
|
/* restore device config and transfermode on devices */
|
|
if (ch->devices & (ATA_ATA_MASTER | ATA_ATAPI_MASTER)) {
|
|
if (ch->device[MASTER].config)
|
|
ch->device[MASTER].config(&ch->device[MASTER]);
|
|
ch->device[MASTER].setmode(&ch->device[MASTER],ch->device[MASTER].mode);
|
|
}
|
|
if (ch->devices & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE)) {
|
|
if (ch->device[SLAVE].config)
|
|
ch->device[SLAVE].config(&ch->device[SLAVE]);
|
|
ch->device[SLAVE].setmode(&ch->device[SLAVE], ch->device[SLAVE].mode);
|
|
}
|
|
|
|
#ifdef DEV_ATAPICAM
|
|
atapi_cam_reinit_bus(ch);
|
|
#endif
|
|
|
|
if (bootverbose)
|
|
ata_printf(ch, -1, "device config done ..\n");
|
|
ch->flags &= ~ATA_IMMEDIATE_MODE;
|
|
ata_start(ch);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ata_suspend(device_t dev)
|
|
{
|
|
struct ata_channel *ch;
|
|
|
|
if (!dev || !(ch = device_get_softc(dev)))
|
|
return ENXIO;
|
|
|
|
ch->locking(ch, ATA_LF_LOCK);
|
|
ATA_SLEEPLOCK_CH(ch, ATA_CONTROL);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
ata_resume(device_t dev)
|
|
{
|
|
struct ata_channel *ch;
|
|
int error;
|
|
|
|
if (!dev || !(ch = device_get_softc(dev)))
|
|
return ENXIO;
|
|
|
|
ch->locking(ch, ATA_LF_LOCK);
|
|
error = ata_reinit(ch);
|
|
ch->locking(ch, ATA_LF_UNLOCK);
|
|
ata_start(ch);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
ata_shutdown(void *arg, int howto)
|
|
{
|
|
struct ata_channel *ch;
|
|
int ctlr;
|
|
|
|
/* flush cache on all devices */
|
|
for (ctlr = 0; ctlr < devclass_get_maxunit(ata_devclass); ctlr++) {
|
|
if (!(ch = devclass_get_softc(ata_devclass, ctlr)))
|
|
continue;
|
|
if (ch->device[MASTER].param &&
|
|
ch->device[MASTER].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
|
|
ata_controlcmd(&ch->device[MASTER], ATA_FLUSHCACHE, 0, 0, 0);
|
|
if (ch->device[SLAVE].param &&
|
|
ch->device[SLAVE].param->support.command2 & ATA_SUPPORT_FLUSHCACHE)
|
|
ata_controlcmd(&ch->device[SLAVE], ATA_FLUSHCACHE, 0, 0, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* device related interfaces
|
|
*/
|
|
static int
|
|
ata_ioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, struct thread *td)
|
|
{
|
|
struct ata_cmd *iocmd = (struct ata_cmd *)addr;
|
|
device_t device = devclass_get_device(ata_devclass, iocmd->channel);
|
|
struct ata_channel *ch;
|
|
struct ata_device *atadev;
|
|
struct ata_request *request;
|
|
caddr_t buf;
|
|
int error = ENOTTY;
|
|
|
|
DROP_GIANT();
|
|
switch (iocmd->cmd) {
|
|
case ATAGMAXCHANNEL:
|
|
iocmd->u.maxchan = devclass_get_maxunit(ata_devclass);
|
|
error = 0;
|
|
break;
|
|
|
|
case ATAGPARM:
|
|
if (!device || !(ch = device_get_softc(device))) {
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
iocmd->u.param.type[MASTER] =
|
|
ch->devices & (ATA_ATA_MASTER | ATA_ATAPI_MASTER);
|
|
iocmd->u.param.type[SLAVE] =
|
|
ch->devices & (ATA_ATA_SLAVE | ATA_ATAPI_SLAVE);
|
|
if (ch->device[MASTER].name)
|
|
strcpy(iocmd->u.param.name[MASTER], ch->device[MASTER].name);
|
|
if (ch->device[SLAVE].name)
|
|
strcpy(iocmd->u.param.name[SLAVE], ch->device[SLAVE].name);
|
|
if (ch->device[MASTER].param)
|
|
bcopy(ch->device[MASTER].param, &iocmd->u.param.params[MASTER],
|
|
sizeof(struct ata_params));
|
|
if (ch->device[SLAVE].param)
|
|
bcopy(ch->device[SLAVE].param, &iocmd->u.param.params[SLAVE],
|
|
sizeof(struct ata_params));
|
|
error = 0;
|
|
break;
|
|
|
|
case ATAGMODE:
|
|
if (!device || !(ch = device_get_softc(device))) {
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
iocmd->u.mode.mode[MASTER] = ch->device[MASTER].mode;
|
|
iocmd->u.mode.mode[SLAVE] = ch->device[SLAVE].mode;
|
|
error = 0;
|
|
break;
|
|
|
|
case ATASMODE:
|
|
if (!device || !(ch = device_get_softc(device))) {
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
if (iocmd->u.mode.mode[MASTER] >= 0 && ch->device[MASTER].param)
|
|
ch->device[MASTER].setmode(&ch->device[MASTER],
|
|
iocmd->u.mode.mode[MASTER]);
|
|
iocmd->u.mode.mode[MASTER] = ch->device[MASTER].mode;
|
|
if (iocmd->u.mode.mode[SLAVE] >= 0 && ch->device[SLAVE].param)
|
|
ch->device[SLAVE].setmode(&ch->device[SLAVE],
|
|
iocmd->u.mode.mode[SLAVE]);
|
|
iocmd->u.mode.mode[SLAVE] = ch->device[SLAVE].mode;
|
|
error = 0;
|
|
break;
|
|
|
|
case ATAREQUEST:
|
|
if (!device || !(ch = device_get_softc(device))) {
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
if (!(atadev = &ch->device[iocmd->device])) {
|
|
error = ENODEV;
|
|
break;
|
|
}
|
|
if (!(buf = malloc(iocmd->u.request.count, M_ATA, M_NOWAIT))) {
|
|
error = ENOMEM;
|
|
break;
|
|
}
|
|
if (!(request = ata_alloc_request())) {
|
|
error = ENOMEM;
|
|
free(buf, M_ATA);
|
|
break;
|
|
}
|
|
if (iocmd->u.request.flags & ATA_CMD_WRITE) {
|
|
error = copyin(iocmd->u.request.data, buf, iocmd->u.request.count);
|
|
if (error) {
|
|
free(buf, M_ATA);
|
|
ata_free_request(request);
|
|
break;
|
|
}
|
|
}
|
|
|
|
request->device = atadev;
|
|
|
|
if (iocmd->u.request.flags & ATA_CMD_ATAPI) {
|
|
request->flags = ATA_R_ATAPI;
|
|
bcopy(iocmd->u.request.u.atapi.ccb, request->u.atapi.ccb, 16);
|
|
}
|
|
else {
|
|
request->u.ata.command = iocmd->u.request.u.ata.command;
|
|
request->u.ata.feature = iocmd->u.request.u.ata.feature;
|
|
request->u.ata.lba = iocmd->u.request.u.ata.lba;
|
|
request->u.ata.count = iocmd->u.request.u.ata.count;
|
|
}
|
|
|
|
request->timeout = iocmd->u.request.timeout;
|
|
request->data = buf;
|
|
request->bytecount = iocmd->u.request.count;
|
|
request->transfersize = request->bytecount;
|
|
|
|
if (iocmd->u.request.flags & ATA_CMD_CONTROL)
|
|
request->flags |= ATA_R_CONTROL;
|
|
if (iocmd->u.request.flags & ATA_CMD_READ)
|
|
request->flags |= ATA_R_READ;
|
|
if (iocmd->u.request.flags & ATA_CMD_WRITE)
|
|
request->flags |= ATA_R_WRITE;
|
|
|
|
ata_queue_request(request);
|
|
|
|
if (request->result)
|
|
iocmd->u.request.error = request->result;
|
|
else {
|
|
if (iocmd->u.request.flags & ATA_CMD_READ)
|
|
error = copyout(buf,
|
|
iocmd->u.request.data, iocmd->u.request.count);
|
|
else
|
|
error = 0;
|
|
}
|
|
free(buf, M_ATA);
|
|
ata_free_request(request);
|
|
break;
|
|
|
|
case ATAREINIT:
|
|
if (!device || !(ch = device_get_softc(device)))
|
|
return ENXIO;
|
|
error = ata_reinit(ch);
|
|
ata_start(ch);
|
|
break;
|
|
|
|
case ATAATTACH:
|
|
if (!device) {
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
/* SOS should enable channel HW on controller XXX */
|
|
error = ata_probe(device);
|
|
if (!error)
|
|
error = ata_attach(device);
|
|
break;
|
|
|
|
case ATADETACH:
|
|
if (!device) {
|
|
error = ENXIO;
|
|
break;
|
|
}
|
|
error = ata_detach(device);
|
|
/* SOS should disable channel HW on controller XXX */
|
|
break;
|
|
|
|
|
|
#ifdef DEV_ATARAID
|
|
case ATARAIDCREATE:
|
|
error = ata_raid_create(&iocmd->u.raid_setup);
|
|
break;
|
|
|
|
case ATARAIDDELETE:
|
|
error = ata_raid_delete(iocmd->channel);
|
|
break;
|
|
|
|
case ATARAIDSTATUS:
|
|
error = ata_raid_status(iocmd->channel, &iocmd->u.raid_status);
|
|
break;
|
|
|
|
case ATARAIDADDSPARE:
|
|
error = ata_raid_addspare(iocmd->channel, iocmd->u.raid_spare.disk);
|
|
break;
|
|
|
|
case ATARAIDREBUILD:
|
|
error = ata_raid_rebuild(iocmd->channel);
|
|
break;
|
|
#endif
|
|
}
|
|
PICKUP_GIANT();
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* device probe functions
|
|
*/
|
|
static int
|
|
ata_getparam(struct ata_device *atadev, u_int8_t command)
|
|
{
|
|
struct ata_request *request;
|
|
int error = ENOMEM;
|
|
|
|
if (!atadev->param)
|
|
atadev->param = malloc(sizeof(struct ata_params), M_ATA, M_NOWAIT);
|
|
if (atadev->param) {
|
|
request = ata_alloc_request();
|
|
if (request) {
|
|
int retries = 2;
|
|
while (retries-- > 0) {
|
|
request->device = atadev;
|
|
request->timeout = 5;
|
|
request->retries = -1;
|
|
request->u.ata.command = command;
|
|
request->flags = (ATA_R_READ | ATA_R_IMMEDIATE);
|
|
request->data = (caddr_t)atadev->param;
|
|
request->bytecount = sizeof(struct ata_params);
|
|
request->transfersize = DEV_BSIZE;
|
|
ata_queue_request(request);
|
|
if (!(error = request->result))
|
|
break;
|
|
}
|
|
ata_free_request(request);
|
|
}
|
|
if (!error && (isprint(atadev->param->model[0]) ||
|
|
isprint(atadev->param->model[1]))) {
|
|
struct ata_params *atacap = atadev->param;
|
|
#if BYTE_ORDER == BIG_ENDIAN
|
|
int16_t *ptr;
|
|
|
|
for (ptr = (int16_t *)atacap;
|
|
ptr < (int16_t *)atacap + sizeof(struct ata_params)/2; ptr++) {
|
|
*ptr = bswap16(*ptr);
|
|
}
|
|
#endif
|
|
if (!((atacap->model[0] == 'N' && atacap->model[1] == 'E') ||
|
|
(atacap->model[0] == 'F' && atacap->model[1] == 'X') ||
|
|
(atacap->model[0] == 'P' && atacap->model[1] == 'i')))
|
|
bswap(atacap->model, sizeof(atacap->model));
|
|
btrim(atacap->model, sizeof(atacap->model));
|
|
bpack(atacap->model, atacap->model, sizeof(atacap->model));
|
|
bswap(atacap->revision, sizeof(atacap->revision));
|
|
btrim(atacap->revision, sizeof(atacap->revision));
|
|
bpack(atacap->revision, atacap->revision, sizeof(atacap->revision));
|
|
bswap(atacap->serial, sizeof(atacap->serial));
|
|
btrim(atacap->serial, sizeof(atacap->serial));
|
|
bpack(atacap->serial, atacap->serial, sizeof(atacap->serial));
|
|
if (bootverbose)
|
|
ata_prtdev(atadev,
|
|
"pio=0x%02x wdma=0x%02x udma=0x%02x cable=%spin\n",
|
|
ata_pmode(atacap), ata_wmode(atacap),
|
|
ata_umode(atacap),
|
|
(atacap->hwres & ATA_CABLE_ID) ? "80":"40");
|
|
}
|
|
else {
|
|
if (!error)
|
|
error = ENXIO;
|
|
if (atadev->param) {
|
|
free(atadev->param, M_ATA);
|
|
atadev->param = NULL;
|
|
}
|
|
}
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
ata_identify_devices(struct ata_channel *ch)
|
|
{
|
|
if (ch->devices & ATA_ATA_SLAVE) {
|
|
if (ata_getparam(&ch->device[SLAVE], ATA_ATA_IDENTIFY))
|
|
ch->devices &= ~ATA_ATA_SLAVE;
|
|
#ifdef DEV_ATADISK
|
|
else
|
|
ch->device[SLAVE].attach = ad_attach;
|
|
#endif
|
|
}
|
|
if (ch->devices & ATA_ATAPI_SLAVE) {
|
|
if (ata_getparam(&ch->device[SLAVE], ATA_ATAPI_IDENTIFY))
|
|
ch->devices &= ~ATA_ATAPI_SLAVE;
|
|
else {
|
|
switch (ch->device[SLAVE].param->config & ATA_ATAPI_TYPE_MASK) {
|
|
#ifdef DEV_ATAPICD
|
|
case ATA_ATAPI_TYPE_CDROM:
|
|
ch->device[SLAVE].attach = acd_attach;
|
|
break;
|
|
#endif
|
|
#ifdef DEV_ATAPIFD
|
|
case ATA_ATAPI_TYPE_DIRECT:
|
|
ch->device[SLAVE].attach = afd_attach;
|
|
break;
|
|
#endif
|
|
#ifdef DEV_ATAPIST
|
|
case ATA_ATAPI_TYPE_TAPE:
|
|
ch->device[SLAVE].attach = ast_attach;
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
if (ch->devices & ATA_ATA_MASTER) {
|
|
if (ata_getparam(&ch->device[MASTER], ATA_ATA_IDENTIFY))
|
|
ch->devices &= ~ATA_ATA_MASTER;
|
|
#ifdef DEV_ATADISK
|
|
else
|
|
ch->device[MASTER].attach = ad_attach;
|
|
#endif
|
|
}
|
|
if (ch->devices & ATA_ATAPI_MASTER) {
|
|
if (ata_getparam(&ch->device[MASTER], ATA_ATAPI_IDENTIFY))
|
|
ch->devices &= ~ATA_ATAPI_MASTER;
|
|
else {
|
|
switch (ch->device[MASTER].param->config & ATA_ATAPI_TYPE_MASK) {
|
|
#ifdef DEV_ATAPICD
|
|
case ATA_ATAPI_TYPE_CDROM:
|
|
ch->device[MASTER].attach = acd_attach;
|
|
break;
|
|
#endif
|
|
#ifdef DEV_ATAPIFD
|
|
case ATA_ATAPI_TYPE_DIRECT:
|
|
ch->device[MASTER].attach = afd_attach;
|
|
break;
|
|
#endif
|
|
#ifdef DEV_ATAPIST
|
|
case ATA_ATAPI_TYPE_TAPE:
|
|
ch->device[MASTER].attach = ast_attach;
|
|
break;
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
/* setup basic transfer mode by setting PIO mode and DMA if supported */
|
|
if (ch->device[MASTER].param) {
|
|
ch->device[MASTER].setmode(&ch->device[MASTER], ATA_PIO_MAX);
|
|
if ((((ch->devices & ATA_ATAPI_MASTER) && atapi_dma &&
|
|
(ch->device[MASTER].param->config&ATA_DRQ_MASK) != ATA_DRQ_INTR)||
|
|
((ch->devices & ATA_ATA_MASTER) && ata_dma)) && ch->dma)
|
|
ch->device[MASTER].setmode(&ch->device[MASTER], ATA_DMA_MAX);
|
|
|
|
}
|
|
if (ch->device[SLAVE].param) {
|
|
ch->device[SLAVE].setmode(&ch->device[SLAVE], ATA_PIO_MAX);
|
|
if ((((ch->devices & ATA_ATAPI_SLAVE) && atapi_dma &&
|
|
(ch->device[SLAVE].param->config&ATA_DRQ_MASK) != ATA_DRQ_INTR) ||
|
|
((ch->devices & ATA_ATA_SLAVE) && ata_dma)) && ch->dma)
|
|
ch->device[SLAVE].setmode(&ch->device[SLAVE], ATA_DMA_MAX);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ata_boot_attach(void)
|
|
{
|
|
struct ata_channel *ch;
|
|
int ctlr;
|
|
|
|
/*
|
|
* run through all ata devices and look for real ATA & ATAPI devices
|
|
* using the hints we found in the early probe, this avoids some of
|
|
* the delays probing of non-exsistent devices can cause.
|
|
*/
|
|
for (ctlr=0; ctlr<devclass_get_maxunit(ata_devclass); ctlr++) {
|
|
if (!(ch = devclass_get_softc(ata_devclass, ctlr)))
|
|
continue;
|
|
ata_identify_devices(ch);
|
|
if (ch->device[MASTER].attach)
|
|
ch->device[MASTER].attach(&ch->device[MASTER]);
|
|
if (ch->device[SLAVE].attach)
|
|
ch->device[SLAVE].attach(&ch->device[SLAVE]);
|
|
#ifdef DEV_ATAPICAM
|
|
atapi_cam_attach_bus(ch);
|
|
#endif
|
|
}
|
|
#ifdef DEV_ATARAID
|
|
ata_raid_attach();
|
|
#endif
|
|
if (ata_delayed_attach) {
|
|
config_intrhook_disestablish(ata_delayed_attach);
|
|
free(ata_delayed_attach, M_TEMP);
|
|
ata_delayed_attach = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* misc support functions
|
|
*/
|
|
static void
|
|
bswap(int8_t *buf, int len)
|
|
{
|
|
u_int16_t *ptr = (u_int16_t*)(buf + len);
|
|
|
|
while (--ptr >= (u_int16_t*)buf)
|
|
*ptr = ntohs(*ptr);
|
|
}
|
|
|
|
static void
|
|
btrim(int8_t *buf, int len)
|
|
{
|
|
int8_t *ptr;
|
|
|
|
for (ptr = buf; ptr < buf+len; ++ptr)
|
|
if (!*ptr)
|
|
*ptr = ' ';
|
|
for (ptr = buf + len - 1; ptr >= buf && *ptr == ' '; --ptr)
|
|
*ptr = 0;
|
|
}
|
|
|
|
static void
|
|
bpack(int8_t *src, int8_t *dst, int len)
|
|
{
|
|
int i, j, blank;
|
|
|
|
for (i = j = blank = 0 ; i < len; i++) {
|
|
if (blank && src[i] == ' ') continue;
|
|
if (blank && src[i] != ' ') {
|
|
dst[j++] = src[i];
|
|
blank = 0;
|
|
continue;
|
|
}
|
|
if (src[i] == ' ') {
|
|
blank = 1;
|
|
if (i == 0)
|
|
continue;
|
|
}
|
|
dst[j++] = src[i];
|
|
}
|
|
if (j < len)
|
|
dst[j] = 0x00;
|
|
}
|
|
|
|
int
|
|
ata_printf(struct ata_channel *ch, int device, const char * fmt, ...)
|
|
{
|
|
va_list ap;
|
|
int ret;
|
|
|
|
if (device == -1)
|
|
ret = printf("ata%d: ", device_get_unit(ch->dev));
|
|
else {
|
|
if (ch->device[ATA_DEV(device)].name)
|
|
ret = printf("%s: ", ch->device[ATA_DEV(device)].name);
|
|
else
|
|
ret = printf("ata%d-%s: ", device_get_unit(ch->dev),
|
|
(device == ATA_MASTER) ? "master" : "slave");
|
|
}
|
|
va_start(ap, fmt);
|
|
ret += vprintf(fmt, ap);
|
|
va_end(ap);
|
|
return ret;
|
|
}
|
|
|
|
int
|
|
ata_prtdev(struct ata_device *atadev, const char * fmt, ...)
|
|
{
|
|
va_list ap;
|
|
int ret;
|
|
|
|
if (atadev->name)
|
|
ret = printf("%s: ", atadev->name);
|
|
else
|
|
ret = printf("ata%d-%s: ", device_get_unit(atadev->channel->dev),
|
|
(atadev->unit == ATA_MASTER) ? "master" : "slave");
|
|
va_start(ap, fmt);
|
|
ret += vprintf(fmt, ap);
|
|
va_end(ap);
|
|
return ret;
|
|
}
|
|
|
|
void
|
|
ata_set_name(struct ata_device *atadev, char *name, int lun)
|
|
{
|
|
atadev->name = malloc(strlen(name) + 4, M_ATA, M_NOWAIT);
|
|
if (atadev->name)
|
|
sprintf(atadev->name, "%s%d", name, lun);
|
|
}
|
|
|
|
void
|
|
ata_free_name(struct ata_device *atadev)
|
|
{
|
|
if (atadev->name)
|
|
free(atadev->name, M_ATA);
|
|
atadev->name = NULL;
|
|
}
|
|
|
|
int
|
|
ata_get_lun(u_int32_t *map)
|
|
{
|
|
int lun = ffs(~*map) - 1;
|
|
|
|
*map |= (1 << lun);
|
|
return lun;
|
|
}
|
|
|
|
int
|
|
ata_test_lun(u_int32_t *map, int lun)
|
|
{
|
|
return (*map & (1 << lun));
|
|
}
|
|
|
|
void
|
|
ata_free_lun(u_int32_t *map, int lun)
|
|
{
|
|
*map &= ~(1 << lun);
|
|
}
|
|
|
|
char *
|
|
ata_mode2str(int mode)
|
|
{
|
|
switch (mode) {
|
|
case ATA_PIO: return "BIOSPIO";
|
|
case ATA_PIO0: return "PIO0";
|
|
case ATA_PIO1: return "PIO1";
|
|
case ATA_PIO2: return "PIO2";
|
|
case ATA_PIO3: return "PIO3";
|
|
case ATA_PIO4: return "PIO4";
|
|
case ATA_DMA: return "BIOSDMA";
|
|
case ATA_WDMA0: return "WDMA0";
|
|
case ATA_WDMA1: return "WDMA1";
|
|
case ATA_WDMA2: return "WDMA2";
|
|
case ATA_UDMA0: return "UDMA16";
|
|
case ATA_UDMA1: return "UDMA25";
|
|
case ATA_UDMA2: return "UDMA33";
|
|
case ATA_UDMA3: return "UDMA40";
|
|
case ATA_UDMA4: return "UDMA66";
|
|
case ATA_UDMA5: return "UDMA100";
|
|
case ATA_UDMA6: return "UDMA133";
|
|
case ATA_SA150: return "SATA150";
|
|
default: return "???";
|
|
}
|
|
}
|
|
|
|
int
|
|
ata_pmode(struct ata_params *ap)
|
|
{
|
|
if (ap->atavalid & ATA_FLAG_64_70) {
|
|
if (ap->apiomodes & 0x02)
|
|
return ATA_PIO4;
|
|
if (ap->apiomodes & 0x01)
|
|
return ATA_PIO3;
|
|
}
|
|
if (ap->mwdmamodes & 0x04)
|
|
return ATA_PIO4;
|
|
if (ap->mwdmamodes & 0x02)
|
|
return ATA_PIO3;
|
|
if (ap->mwdmamodes & 0x01)
|
|
return ATA_PIO2;
|
|
if ((ap->retired_piomode & ATA_RETIRED_PIO_MASK) == 0x200)
|
|
return ATA_PIO2;
|
|
if ((ap->retired_piomode & ATA_RETIRED_PIO_MASK) == 0x100)
|
|
return ATA_PIO1;
|
|
if ((ap->retired_piomode & ATA_RETIRED_PIO_MASK) == 0x000)
|
|
return ATA_PIO0;
|
|
return ATA_PIO0;
|
|
}
|
|
|
|
int
|
|
ata_wmode(struct ata_params *ap)
|
|
{
|
|
if (ap->mwdmamodes & 0x04)
|
|
return ATA_WDMA2;
|
|
if (ap->mwdmamodes & 0x02)
|
|
return ATA_WDMA1;
|
|
if (ap->mwdmamodes & 0x01)
|
|
return ATA_WDMA0;
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
ata_umode(struct ata_params *ap)
|
|
{
|
|
if (ap->atavalid & ATA_FLAG_88) {
|
|
if (ap->udmamodes & 0x40)
|
|
return ATA_UDMA6;
|
|
if (ap->udmamodes & 0x20)
|
|
return ATA_UDMA5;
|
|
if (ap->udmamodes & 0x10)
|
|
return ATA_UDMA4;
|
|
if (ap->udmamodes & 0x08)
|
|
return ATA_UDMA3;
|
|
if (ap->udmamodes & 0x04)
|
|
return ATA_UDMA2;
|
|
if (ap->udmamodes & 0x02)
|
|
return ATA_UDMA1;
|
|
if (ap->udmamodes & 0x01)
|
|
return ATA_UDMA0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
ata_limit_mode(struct ata_device *atadev, int mode, int maxmode)
|
|
{
|
|
if (maxmode && mode > maxmode)
|
|
mode = maxmode;
|
|
|
|
if (mode >= ATA_UDMA0 && ata_umode(atadev->param) > 0)
|
|
return min(mode, ata_umode(atadev->param));
|
|
|
|
if (mode >= ATA_WDMA0 && ata_wmode(atadev->param) > 0)
|
|
return min(mode, ata_wmode(atadev->param));
|
|
|
|
if (mode > ata_pmode(atadev->param))
|
|
return min(mode, ata_pmode(atadev->param));
|
|
|
|
return mode;
|
|
}
|
|
|
|
static void
|
|
ata_init(void)
|
|
{
|
|
/* register controlling device */
|
|
make_dev(&ata_cdevsw, 0, UID_ROOT, GID_OPERATOR, 0600, "ata");
|
|
|
|
/* register boot attach to be run when interrupts are enabled */
|
|
if (!(ata_delayed_attach = (struct intr_config_hook *)
|
|
malloc(sizeof(struct intr_config_hook),
|
|
M_TEMP, M_NOWAIT | M_ZERO))) {
|
|
printf("ata: malloc of delayed attach hook failed\n");
|
|
return;
|
|
}
|
|
ata_delayed_attach->ich_func = (void*)ata_boot_attach;
|
|
if (config_intrhook_establish(ata_delayed_attach) != 0) {
|
|
printf("ata: config_intrhook_establish failed\n");
|
|
free(ata_delayed_attach, M_TEMP);
|
|
}
|
|
|
|
/* register handler to flush write caches on shutdown */
|
|
if ((EVENTHANDLER_REGISTER(shutdown_post_sync, ata_shutdown,
|
|
NULL, SHUTDOWN_PRI_DEFAULT)) == NULL)
|
|
printf("ata: shutdown event registration failed!\n");
|
|
|
|
/* init our UMA zone for ATA requests */
|
|
ata_zone = uma_zcreate("ata_request", sizeof(struct ata_request),
|
|
NULL, NULL, NULL, NULL, 0, 0);
|
|
}
|
|
SYSINIT(atadev, SI_SUB_DRIVERS, SI_ORDER_SECOND, ata_init, NULL)
|