956d3333ca
----------------------------- The compatibility code and/or emulators have been updated: iBCS2 now mostly uses the older syscalls. SVR4 now properly handles all signals. This has been achieved by using the new sigset_t throughout the emulator. The Linuxulator has been severely updated. Internally the new Linux sigset_t is made the default. These are then mapped to and from the new FreeBSD sigset_t. Also, rt_sigsuspend has been implemented in the Linuxulator. Implementing this syscall basicly caused all this sigset_t changing in the first place and the syscall has been used throughout the change as a means for testing. It basicly is too much work to undo the implementation so that it can later be added again. A special note on the use of sv_sigtbl and sv_sigsize in struct sysentvec: Every signal larger than sv_sigsize is not translated and is passed on to the signal handler unmodified. Signals in the range 1 upto and including sv_sigsize are translated. The rationale is that only the system defined signals need to be translated. The emulators also have been updated so that the translation tables are only indexed for valid (system defined) signals. This change also fixes the translation bug already in the SVR4 emulator.
561 lines
14 KiB
C
561 lines
14 KiB
C
/*
|
|
* Copyright (c) 1998 Mark Newton
|
|
* Copyright (c) 1994 Christos Zoulas
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/namei.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/exec.h>
|
|
#include <sys/lock.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_kern.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/pmap.h>
|
|
#include <vm/vm_map.h>
|
|
#include <vm/vm_prot.h>
|
|
#include <vm/vm_extern.h>
|
|
#include <sys/user.h>
|
|
#include <sys/filedesc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/signal.h>
|
|
#include <sys/signalvar.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mount.h>
|
|
#include <sys/sysproto.h>
|
|
#include <sys/elf32.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/cpufunc.h>
|
|
#include <machine/psl.h>
|
|
#include <machine/reg.h>
|
|
#include <machine/specialreg.h>
|
|
#include <machine/sysarch.h>
|
|
#include <machine/vm86.h>
|
|
#include <machine/vmparam.h>
|
|
|
|
#include <svr4/svr4.h>
|
|
#include <svr4/svr4_types.h>
|
|
#include <svr4/svr4_signal.h>
|
|
#include <i386/svr4/svr4_machdep.h>
|
|
#include <svr4/svr4_ucontext.h>
|
|
#include <svr4/svr4_proto.h>
|
|
#include <svr4/svr4_util.h>
|
|
#include <svr4/svr4_exec.h>
|
|
|
|
#undef sigcode
|
|
#undef szsigcode
|
|
|
|
extern int svr4_szsigcode;
|
|
extern char svr4_sigcode[];
|
|
extern int _udatasel, _ucodesel;
|
|
|
|
static void svr4_getsiginfo __P((union svr4_siginfo *, int, u_long, caddr_t));
|
|
|
|
#if !defined(__NetBSD__)
|
|
/* taken from /sys/arch/i386/include/psl.h on NetBSD-1.3 */
|
|
# define PSL_MBZ 0xffc08028
|
|
# define PSL_USERSTATIC (PSL_USER | PSL_MBZ | PSL_IOPL | PSL_NT | PSL_VM | PSL_VIF | PSL_VIP)
|
|
# define USERMODE(c, f) (ISPL(c) == SEL_UPL)
|
|
#endif
|
|
|
|
#if defined(__NetBSD__)
|
|
void
|
|
svr4_setregs(p, epp, stack)
|
|
struct proc *p;
|
|
struct exec_package *epp;
|
|
u_long stack;
|
|
{
|
|
register struct pcb *pcb = &p->p_addr->u_pcb;
|
|
|
|
pcb->pcb_savefpu.sv_env.en_cw = __SVR4_NPXCW__;
|
|
setregs(p, epp, stack, 0UL);
|
|
}
|
|
#endif /* __NetBSD__ */
|
|
|
|
void
|
|
svr4_getcontext(p, uc, mask, oonstack)
|
|
struct proc *p;
|
|
struct svr4_ucontext *uc;
|
|
sigset_t *mask;
|
|
int oonstack;
|
|
{
|
|
struct trapframe *tf = p->p_md.md_regs;
|
|
svr4_greg_t *r = uc->uc_mcontext.greg;
|
|
struct svr4_sigaltstack *s = &uc->uc_stack;
|
|
#ifdef DONE_MORE_SIGALTSTACK_WORK
|
|
struct sigacts *psp = p->p_sigacts;
|
|
struct sigaltstack *sf = &psp->ps_sigstk;
|
|
#endif
|
|
|
|
memset(uc, 0, sizeof(struct svr4_ucontext));
|
|
|
|
uc->uc_link = p->p_emuldata;
|
|
/*
|
|
* Set the general purpose registers
|
|
*/
|
|
#ifdef VM86
|
|
if (tf->tf_eflags & PSL_VM) {
|
|
r[SVR4_X86_GS] = tf->tf_vm86_gs;
|
|
r[SVR4_X86_FS] = tf->tf_vm86_fs;
|
|
r[SVR4_X86_ES] = tf->tf_vm86_es;
|
|
r[SVR4_X86_DS] = tf->tf_vm86_ds;
|
|
r[SVR4_X86_EFL] = get_vflags(p);
|
|
} else
|
|
#endif
|
|
{
|
|
#if defined(__NetBSD__)
|
|
__asm("movl %%gs,%w0" : "=r" (r[SVR4_X86_GS]));
|
|
__asm("movl %%fs,%w0" : "=r" (r[SVR4_X86_FS]));
|
|
#else
|
|
r[SVR4_X86_GS] = rgs();
|
|
r[SVR4_X86_FS] = tf->tf_fs;
|
|
#endif
|
|
r[SVR4_X86_ES] = tf->tf_es;
|
|
r[SVR4_X86_DS] = tf->tf_ds;
|
|
r[SVR4_X86_EFL] = tf->tf_eflags;
|
|
}
|
|
r[SVR4_X86_EDI] = tf->tf_edi;
|
|
r[SVR4_X86_ESI] = tf->tf_esi;
|
|
r[SVR4_X86_EBP] = tf->tf_ebp;
|
|
r[SVR4_X86_ESP] = tf->tf_esp;
|
|
r[SVR4_X86_EBX] = tf->tf_ebx;
|
|
r[SVR4_X86_EDX] = tf->tf_edx;
|
|
r[SVR4_X86_ECX] = tf->tf_ecx;
|
|
r[SVR4_X86_EAX] = tf->tf_eax;
|
|
r[SVR4_X86_TRAPNO] = tf->tf_trapno;
|
|
r[SVR4_X86_ERR] = tf->tf_err;
|
|
r[SVR4_X86_EIP] = tf->tf_eip;
|
|
r[SVR4_X86_CS] = tf->tf_cs;
|
|
r[SVR4_X86_UESP] = 0;
|
|
r[SVR4_X86_SS] = tf->tf_ss;
|
|
|
|
/*
|
|
* Set the signal stack
|
|
*/
|
|
#if DONE_MORE_SIGALTSTACK_WORK
|
|
bsd_to_svr4_sigaltstack(sf, s);
|
|
#else
|
|
s->ss_sp = (void *)(((u_long) tf->tf_esp) & ~(16384 - 1));
|
|
s->ss_size = 16384;
|
|
s->ss_flags = 0;
|
|
#endif
|
|
|
|
/*
|
|
* Set the signal mask
|
|
*/
|
|
bsd_to_svr4_sigset(mask, &uc->uc_sigmask);
|
|
|
|
/*
|
|
* Set the flags
|
|
*/
|
|
uc->uc_flags = SVR4_UC_STACK|SVR4_UC_SIGMASK|SVR4_UC_CPU;
|
|
}
|
|
|
|
|
|
/*
|
|
* Set to ucontext specified.
|
|
* has been taken. Reset signal mask and
|
|
* stack state from context.
|
|
* Return to previous pc and psl as specified by
|
|
* context left by sendsig. Check carefully to
|
|
* make sure that the user has not modified the
|
|
* psl to gain improper privileges or to cause
|
|
* a machine fault.
|
|
*/
|
|
int
|
|
svr4_setcontext(p, uc)
|
|
struct proc *p;
|
|
struct svr4_ucontext *uc;
|
|
{
|
|
struct sigacts *psp = p->p_sigacts;
|
|
register struct trapframe *tf;
|
|
svr4_greg_t *r = uc->uc_mcontext.greg;
|
|
struct svr4_sigaltstack *s = &uc->uc_stack;
|
|
struct sigaltstack *sf = &psp->ps_sigstk;
|
|
sigset_t mask;
|
|
|
|
/*
|
|
* XXX:
|
|
* Should we check the value of flags to determine what to restore?
|
|
* What to do with uc_link?
|
|
* What to do with floating point stuff?
|
|
* Should we bother with the rest of the registers that we
|
|
* set to 0 right now?
|
|
*/
|
|
|
|
if ((uc->uc_flags & SVR4_UC_CPU) == 0)
|
|
return 0;
|
|
|
|
tf = p->p_md.md_regs;
|
|
|
|
/*
|
|
* Restore register context.
|
|
*/
|
|
#ifdef VM86
|
|
if (r[SVR4_X86_EFL] & PSL_VM) {
|
|
tf->tf_vm86_gs = r[SVR4_X86_GS];
|
|
tf->tf_vm86_fs = r[SVR4_X86_FS];
|
|
tf->tf_vm86_es = r[SVR4_X86_ES];
|
|
tf->tf_vm86_ds = r[SVR4_X86_DS];
|
|
set_vflags(p, r[SVR4_X86_EFL]);
|
|
} else
|
|
#endif
|
|
{
|
|
/*
|
|
* Check for security violations. If we're returning to
|
|
* protected mode, the CPU will validate the segment registers
|
|
* automatically and generate a trap on violations. We handle
|
|
* the trap, rather than doing all of the checking here.
|
|
*/
|
|
if (((r[SVR4_X86_EFL] ^ tf->tf_eflags) & PSL_USERSTATIC) != 0 ||
|
|
!USERMODE(r[SVR4_X86_CS], r[SVR4_X86_EFL]))
|
|
return (EINVAL);
|
|
|
|
#if defined(__NetBSD__)
|
|
/* %fs and %gs were restored by the trampoline. */
|
|
#else
|
|
/* %gs was restored by the trampoline. */
|
|
tf->tf_fs = r[SVR4_X86_FS];
|
|
#endif
|
|
tf->tf_es = r[SVR4_X86_ES];
|
|
tf->tf_ds = r[SVR4_X86_DS];
|
|
tf->tf_eflags = r[SVR4_X86_EFL];
|
|
}
|
|
tf->tf_edi = r[SVR4_X86_EDI];
|
|
tf->tf_esi = r[SVR4_X86_ESI];
|
|
tf->tf_ebp = r[SVR4_X86_EBP];
|
|
tf->tf_ebx = r[SVR4_X86_EBX];
|
|
tf->tf_edx = r[SVR4_X86_EDX];
|
|
tf->tf_ecx = r[SVR4_X86_ECX];
|
|
tf->tf_eax = r[SVR4_X86_EAX];
|
|
tf->tf_trapno = r[SVR4_X86_TRAPNO];
|
|
tf->tf_err = r[SVR4_X86_ERR];
|
|
tf->tf_eip = r[SVR4_X86_EIP];
|
|
tf->tf_cs = r[SVR4_X86_CS];
|
|
tf->tf_ss = r[SVR4_X86_SS];
|
|
tf->tf_esp = r[SVR4_X86_ESP];
|
|
|
|
p->p_emuldata = uc->uc_link;
|
|
/*
|
|
* restore signal stack
|
|
*/
|
|
if (uc->uc_flags & SVR4_UC_STACK) {
|
|
svr4_to_bsd_sigaltstack(s, sf);
|
|
}
|
|
|
|
/*
|
|
* restore signal mask
|
|
*/
|
|
if (uc->uc_flags & SVR4_UC_SIGMASK) {
|
|
svr4_to_bsd_sigset(&uc->uc_sigmask, &mask);
|
|
p->p_sigmask = mask;
|
|
SIG_CANTMASK(p->p_sigmask);
|
|
}
|
|
|
|
return 0; /*EJUSTRETURN;*/
|
|
}
|
|
|
|
|
|
static void
|
|
svr4_getsiginfo(si, sig, code, addr)
|
|
union svr4_siginfo *si;
|
|
int sig;
|
|
u_long code;
|
|
caddr_t addr;
|
|
{
|
|
si->si_signo = bsd_to_svr4_sig[sig];
|
|
si->si_errno = 0;
|
|
si->si_addr = addr;
|
|
|
|
switch (code) {
|
|
case T_PRIVINFLT:
|
|
si->si_code = SVR4_ILL_PRVOPC;
|
|
si->si_trap = SVR4_T_PRIVINFLT;
|
|
break;
|
|
|
|
case T_BPTFLT:
|
|
si->si_code = SVR4_TRAP_BRKPT;
|
|
si->si_trap = SVR4_T_BPTFLT;
|
|
break;
|
|
|
|
case T_ARITHTRAP:
|
|
si->si_code = SVR4_FPE_INTOVF;
|
|
si->si_trap = SVR4_T_DIVIDE;
|
|
break;
|
|
|
|
case T_PROTFLT:
|
|
si->si_code = SVR4_SEGV_ACCERR;
|
|
si->si_trap = SVR4_T_PROTFLT;
|
|
break;
|
|
|
|
case T_TRCTRAP:
|
|
si->si_code = SVR4_TRAP_TRACE;
|
|
si->si_trap = SVR4_T_TRCTRAP;
|
|
break;
|
|
|
|
case T_PAGEFLT:
|
|
si->si_code = SVR4_SEGV_ACCERR;
|
|
si->si_trap = SVR4_T_PAGEFLT;
|
|
break;
|
|
|
|
case T_ALIGNFLT:
|
|
si->si_code = SVR4_BUS_ADRALN;
|
|
si->si_trap = SVR4_T_ALIGNFLT;
|
|
break;
|
|
|
|
case T_DIVIDE:
|
|
si->si_code = SVR4_FPE_FLTDIV;
|
|
si->si_trap = SVR4_T_DIVIDE;
|
|
break;
|
|
|
|
case T_OFLOW:
|
|
si->si_code = SVR4_FPE_FLTOVF;
|
|
si->si_trap = SVR4_T_DIVIDE;
|
|
break;
|
|
|
|
case T_BOUND:
|
|
si->si_code = SVR4_FPE_FLTSUB;
|
|
si->si_trap = SVR4_T_BOUND;
|
|
break;
|
|
|
|
case T_DNA:
|
|
si->si_code = SVR4_FPE_FLTINV;
|
|
si->si_trap = SVR4_T_DNA;
|
|
break;
|
|
|
|
case T_FPOPFLT:
|
|
si->si_code = SVR4_FPE_FLTINV;
|
|
si->si_trap = SVR4_T_FPOPFLT;
|
|
break;
|
|
|
|
case T_SEGNPFLT:
|
|
si->si_code = SVR4_SEGV_MAPERR;
|
|
si->si_trap = SVR4_T_SEGNPFLT;
|
|
break;
|
|
|
|
case T_STKFLT:
|
|
si->si_code = SVR4_ILL_BADSTK;
|
|
si->si_trap = SVR4_T_STKFLT;
|
|
break;
|
|
|
|
default:
|
|
si->si_code = 0;
|
|
si->si_trap = 0;
|
|
#ifdef DIAGNOSTIC
|
|
printf("sig %d code %ld\n", sig, code);
|
|
panic("svr4_getsiginfo");
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Send an interrupt to process.
|
|
*
|
|
* Stack is set up to allow sigcode stored
|
|
* in u. to call routine. After the handler is
|
|
* done svr4 will call setcontext for us
|
|
* with the user context we just set up, and we
|
|
* will return to the user pc, psl.
|
|
*/
|
|
void
|
|
svr4_sendsig(catcher, sig, mask, code)
|
|
sig_t catcher;
|
|
int sig;
|
|
sigset_t *mask;
|
|
u_long code;
|
|
{
|
|
register struct proc *p = curproc;
|
|
register struct trapframe *tf;
|
|
struct svr4_sigframe *fp, frame;
|
|
struct sigacts *psp = p->p_sigacts;
|
|
int oonstack;
|
|
|
|
tf = p->p_md.md_regs;
|
|
oonstack = psp->ps_sigstk.ss_flags & SS_ONSTACK;
|
|
|
|
/*
|
|
* Allocate space for the signal handler context.
|
|
*/
|
|
if ((psp->ps_flags & SAS_ALTSTACK) && !oonstack &&
|
|
SIGISMEMBER(psp->ps_sigonstack, sig)) {
|
|
fp = (struct svr4_sigframe *)((caddr_t)psp->ps_sigstk.ss_sp +
|
|
psp->ps_sigstk.ss_size - sizeof(struct svr4_sigframe));
|
|
psp->ps_sigstk.ss_flags |= SS_ONSTACK;
|
|
} else {
|
|
fp = (struct svr4_sigframe *)tf->tf_esp - 1;
|
|
}
|
|
|
|
/*
|
|
* Build the argument list for the signal handler.
|
|
* Notes:
|
|
* - we always build the whole argument list, even when we
|
|
* don't need to [when SA_SIGINFO is not set, we don't need
|
|
* to pass all sf_si and sf_uc]
|
|
* - we don't pass the correct signal address [we need to
|
|
* modify many kernel files to enable that]
|
|
*/
|
|
|
|
svr4_getcontext(p, &frame.sf_uc, mask, oonstack);
|
|
DPRINTF(("obtained ucontext\n"));
|
|
svr4_getsiginfo(&frame.sf_si, sig, code, (caddr_t) tf->tf_eip);
|
|
DPRINTF(("obtained siginfo\n"));
|
|
frame.sf_signum = frame.sf_si.si_signo;
|
|
frame.sf_sip = &fp->sf_si;
|
|
frame.sf_ucp = &fp->sf_uc;
|
|
frame.sf_handler = catcher;
|
|
#ifdef DEBUG_SVR4
|
|
printf("sig = %d, sip %p, ucp = %p, handler = %p\n",
|
|
frame.sf_signum, frame.sf_sip, frame.sf_ucp, frame.sf_handler);
|
|
#endif
|
|
|
|
if (copyout(&frame, fp, sizeof(frame)) != 0) {
|
|
/*
|
|
* Process has trashed its stack; give it an illegal
|
|
* instruction to halt it in its tracks.
|
|
*/
|
|
sigexit(p, SIGILL);
|
|
/* NOTREACHED */
|
|
}
|
|
#if defined(__NetBSD__)
|
|
/*
|
|
* Build context to run handler in.
|
|
*/
|
|
tf->tf_es = GSEL(GUSERLDT_SEL, SEL_UPL);
|
|
tf->tf_ds = GSEL(GUSERLDT_SEL, SEL_UPL);
|
|
tf->tf_eip = (int)(((char *)PS_STRINGS) -
|
|
svr4_szsigcode);
|
|
tf->tf_cs = GSEL(GUSERLDT_SEL, SEL_UPL);
|
|
|
|
tf->tf_eflags &= ~(PSL_T|PSL_VM|PSL_AC);
|
|
tf->tf_esp = (int)fp;
|
|
tf->tf_ss = GSEL(GUSERLDT_SEL, SEL_UPL);
|
|
#else
|
|
tf->tf_esp = (int)fp;
|
|
tf->tf_eip = (int)(((char *)PS_STRINGS) - *(p->p_sysent->sv_szsigcode));
|
|
tf->tf_cs = _ucodesel;
|
|
tf->tf_ds = _udatasel;
|
|
tf->tf_es = _udatasel;
|
|
tf->tf_fs = _udatasel;
|
|
tf->tf_ss = _udatasel;
|
|
#endif
|
|
}
|
|
|
|
|
|
|
|
int
|
|
svr4_sys_sysarch(p, v)
|
|
struct proc *p;
|
|
struct svr4_sys_sysarch_args *v;
|
|
{
|
|
struct svr4_sys_sysarch_args *uap = v;
|
|
#ifdef USER_LDT
|
|
caddr_t sg = stackgap_init(p->p_emul);
|
|
int error;
|
|
#endif
|
|
switch (uap->op) {
|
|
case SVR4_SYSARCH_FPHW:
|
|
return 0;
|
|
|
|
case SVR4_SYSARCH_DSCR:
|
|
#ifdef USER_LDT
|
|
{
|
|
struct i386_set_ldt_args sa, *sap;
|
|
struct sys_sysarch_args ua;
|
|
|
|
struct svr4_ssd ssd;
|
|
union descriptor bsd;
|
|
|
|
if ((error = copyin(SCARG(uap, a1), &ssd,
|
|
sizeof(ssd))) != 0) {
|
|
printf("Cannot copy arg1\n");
|
|
return error;
|
|
}
|
|
|
|
printf("s=%x, b=%x, l=%x, a1=%x a2=%x\n",
|
|
ssd.selector, ssd.base, ssd.limit,
|
|
ssd.access1, ssd.access2);
|
|
|
|
/* We can only set ldt's for now. */
|
|
if (!ISLDT(ssd.selector)) {
|
|
printf("Not an ldt\n");
|
|
return EPERM;
|
|
}
|
|
|
|
/* Oh, well we don't cleanup either */
|
|
if (ssd.access1 == 0)
|
|
return 0;
|
|
|
|
bsd.sd.sd_lobase = ssd.base & 0xffffff;
|
|
bsd.sd.sd_hibase = (ssd.base >> 24) & 0xff;
|
|
|
|
bsd.sd.sd_lolimit = ssd.limit & 0xffff;
|
|
bsd.sd.sd_hilimit = (ssd.limit >> 16) & 0xf;
|
|
|
|
bsd.sd.sd_type = ssd.access1 & 0x1f;
|
|
bsd.sd.sd_dpl = (ssd.access1 >> 5) & 0x3;
|
|
bsd.sd.sd_p = (ssd.access1 >> 7) & 0x1;
|
|
|
|
bsd.sd.sd_xx = ssd.access2 & 0x3;
|
|
bsd.sd.sd_def32 = (ssd.access2 >> 2) & 0x1;
|
|
bsd.sd.sd_gran = (ssd.access2 >> 3)& 0x1;
|
|
|
|
sa.start = IDXSEL(ssd.selector);
|
|
sa.desc = stackgap_alloc(&sg, sizeof(union descriptor));
|
|
sa.num = 1;
|
|
sap = stackgap_alloc(&sg,
|
|
sizeof(struct i386_set_ldt_args));
|
|
|
|
if ((error = copyout(&sa, sap, sizeof(sa))) != 0) {
|
|
printf("Cannot copyout args\n");
|
|
return error;
|
|
}
|
|
|
|
SCARG(&ua, op) = I386_SET_LDT;
|
|
SCARG(&ua, parms) = (char *) sap;
|
|
|
|
if ((error = copyout(&bsd, sa.desc, sizeof(bsd))) != 0) {
|
|
printf("Cannot copyout desc\n");
|
|
return error;
|
|
}
|
|
|
|
return sys_sysarch(p, &ua, retval);
|
|
}
|
|
#endif
|
|
|
|
default:
|
|
printf("svr4_sysarch(%d), a1 %p\n", uap->op,
|
|
uap->a1);
|
|
return 0;
|
|
}
|
|
}
|