freebsd with flexible iflib nic queues
9293eb399e
configured down. Formerly, IPMI communication was lost whenever the interface was not up. The reason was that the BCE_EMAC_MODE register was not configured with the correct media settings. There are two parts to the fix. First, resetting the chip in bce_reset() causes the BCE_EMAC_MODE register to be initialized to a default value that does not necessarily correspond to the actual media settings. The fix implemented here is a bit of a hack. Ideally, at the end of bce_reset() we would poll the PHY to determine the negotiated media, and then we would set the BCE_EMAC_MODE register accordingly. That is difficult, since the PHY is abstracted behind the MII layer and is not supposed to be queried directly from the MAC driver. Instead, we read the BCE_EMAC_MODE register at the beginning of bce_reset() and then restore its media bits to their original values before returning. If IPMI is up and running, then the link is already established and the BCE_EMAC_MODE register is already set appropriately when bce_reset() is called. If IPMI is not running, no harm is done by preserving the BCE_EMAC_MODE settings. The driver will set the register properly once the interface is configured up and link is established. Second, bce_miibus_statchg() is sometimes called when the link is down. In that case, the reported media settings are invalid. Formerly, the driver used them anyway to setup the BCE_EMAC_MODE register. We now avoid changing any MAC registers unless link is active and the reported media settings are valid. Submitted by: jdp Tested by: jdp MFC after: 5 days |
||
|---|---|---|
| bin | ||
| cddl | ||
| contrib | ||
| crypto | ||
| etc | ||
| games | ||
| gnu | ||
| include | ||
| kerberos5 | ||
| lib | ||
| libexec | ||
| release | ||
| rescue | ||
| sbin | ||
| secure | ||
| share | ||
| sys | ||
| tools | ||
| usr.bin | ||
| usr.sbin | ||
| COPYRIGHT | ||
| LOCKS | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc1 | ||
| ObsoleteFiles.inc | ||
| README | ||
| UPDATING | ||
This is the top level of the FreeBSD source directory. This file was last revised on: $FreeBSD$ For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information). The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree, the most commonly used one being ``world'', which rebuilds and installs everything in the FreeBSD system from the source tree except the kernel, the kernel-modules and the contents of /etc. The ``world'' target should only be used in cases where the source tree has not changed from the currently running version. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables. The ``buildkernel'' and ``installkernel'' targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags. Building a kernel is a somewhat more involved process, documentation for which can be found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html And in the config(8) man page. Note: If you want to build and install the kernel with the ``buildkernel'' and ``installkernel'' targets, you might need to build world before. More information is available in the handbook. The sample kernel configuration files reside in the sys/<arch>/conf sub-directory (assuming that you've installed the kernel sources), the file named GENERIC being the one used to build your initial installation kernel. The file NOTES contains entries and documentation for all possible devices, not just those commonly used. It is the successor of the ancient LINT file, but in contrast to LINT, it is not buildable as a kernel but a pure reference and documentation file. Source Roadmap: --------------- bin System/user commands. cddl Various commands and libraries under the Common Development and Distribution License. contrib Packages contributed by 3rd parties. crypto Cryptography stuff (see crypto/README). etc Template files for /etc. games Amusements. gnu Various commands and libraries under the GNU Public License. Please see gnu/COPYING* for more information. include System include files. kerberos5 Kerberos5 (Heimdal) package. lib System libraries. libexec System daemons. release Release building Makefile & associated tools. rescue Build system for statically linked /rescue utilities. sbin System commands. secure Cryptographic libraries and commands. share Shared resources. sys Kernel sources. tools Utilities for regression testing and miscellaneous tasks. usr.bin User commands. usr.sbin System administration commands. For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html