freebsd-nq/sys/dev/intel/spi.c
Takanori Watanabe 5efca36fbd Distinguish _CID match and _HID match and make lower priority probe
when _CID match.

Reviewed by: jhb, imp
Differential Revision:https://reviews.freebsd.org/D16468
2018-10-26 00:05:46 +00:00

535 lines
13 KiB
C

/*-
* Copyright (c) 2016 Oleksandr Tymoshenko <gonzo@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/proc.h>
#include <sys/rman.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <dev/spibus/spi.h>
#include <dev/spibus/spibusvar.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <dev/acpica/acpivar.h>
#include "spibus_if.h"
/**
* Macros for driver mutex locking
*/
#define INTELSPI_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define INTELSPI_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define INTELSPI_LOCK_INIT(_sc) \
mtx_init(&_sc->sc_mtx, device_get_nameunit((_sc)->sc_dev), \
"intelspi", MTX_DEF)
#define INTELSPI_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx)
#define INTELSPI_ASSERT_LOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED)
#define INTELSPI_ASSERT_UNLOCKED(_sc) mtx_assert(&(_sc)->sc_mtx, MA_NOTOWNED)
#define INTELSPI_WRITE(_sc, _off, _val) \
bus_write_4((_sc)->sc_mem_res, (_off), (_val))
#define INTELSPI_READ(_sc, _off) \
bus_read_4((_sc)->sc_mem_res, (_off))
#define INTELSPI_BUSY 0x1
#define TX_FIFO_THRESHOLD 2
#define RX_FIFO_THRESHOLD 2
#define CLOCK_DIV_10MHZ 5
#define DATA_SIZE_8BITS 8
#define CS_LOW 0
#define CS_HIGH 1
#define INTELSPI_SSPREG_SSCR0 0x0
#define SSCR0_SCR(n) (((n) - 1) << 8)
#define SSCR0_SSE (1 << 7)
#define SSCR0_FRF_SPI (0 << 4)
#define SSCR0_DSS(n) (((n) - 1) << 0)
#define INTELSPI_SSPREG_SSCR1 0x4
#define SSCR1_TINTE (1 << 19)
#define SSCR1_RFT(n) (((n) - 1) << 10)
#define SSCR1_RFT_MASK (0xf << 10)
#define SSCR1_TFT(n) (((n) - 1) << 6)
#define SSCR1_SPI_SPH (1 << 4)
#define SSCR1_SPI_SPO (1 << 3)
#define SSCR1_MODE_MASK (SSCR1_SPI_SPO | SSCR1_SPI_SPH)
#define SSCR1_MODE_0 (0)
#define SSCR1_MODE_1 (SSCR1_SPI_SPH)
#define SSCR1_MODE_2 (SSCR1_SPI_SPO)
#define SSCR1_MODE_3 (SSCR1_SPI_SPO | SSCR1_SPI_SPH)
#define SSCR1_TIE (1 << 1)
#define SSCR1_RIE (1 << 0)
#define INTELSPI_SSPREG_SSSR 0x8
#define SSSR_RFL_MASK (0xf << 12)
#define SSSR_TFL_MASK (0xf << 8)
#define SSSR_RNE (1 << 3)
#define SSSR_TNF (1 << 2)
#define INTELSPI_SSPREG_SSITR 0xC
#define INTELSPI_SSPREG_SSDR 0x10
#define INTELSPI_SSPREG_SSTO 0x28
#define INTELSPI_SSPREG_SSPSP 0x2C
#define INTELSPI_SSPREG_SSTSA 0x30
#define INTELSPI_SSPREG_SSRSA 0x34
#define INTELSPI_SSPREG_SSTSS 0x38
#define INTELSPI_SSPREG_SSACD 0x3C
#define INTELSPI_SSPREG_ITF 0x40
#define INTELSPI_SSPREG_SITF 0x44
#define INTELSPI_SSPREG_SIRF 0x48
#define INTELSPI_SSPREG_PRV_CLOCK_PARAMS 0x400
#define INTELSPI_SSPREG_RESETS 0x404
#define INTELSPI_SSPREG_GENERAL 0x408
#define INTELSPI_SSPREG_SSP_REG 0x40C
#define INTELSPI_SSPREG_SPI_CS_CTRL 0x418
#define SPI_CS_CTRL_CS_MASK (3)
#define SPI_CS_CTRL_SW_MODE (1 << 0)
#define SPI_CS_CTRL_HW_MODE (1 << 0)
#define SPI_CS_CTRL_CS_HIGH (1 << 1)
#define SPI_CS_CTRL_CS_LOW (0 << 1)
struct intelspi_softc {
ACPI_HANDLE sc_handle;
device_t sc_dev;
struct mtx sc_mtx;
int sc_mem_rid;
struct resource *sc_mem_res;
int sc_irq_rid;
struct resource *sc_irq_res;
void *sc_irq_ih;
struct spi_command *sc_cmd;
uint32_t sc_len;
uint32_t sc_read;
uint32_t sc_flags;
uint32_t sc_written;
};
static int intelspi_probe(device_t dev);
static int intelspi_attach(device_t dev);
static int intelspi_detach(device_t dev);
static void intelspi_intr(void *);
static int
intelspi_txfifo_full(struct intelspi_softc *sc)
{
uint32_t sssr;
INTELSPI_ASSERT_LOCKED(sc);
sssr = INTELSPI_READ(sc, INTELSPI_SSPREG_SSSR);
if (sssr & SSSR_TNF)
return (0);
return (1);
}
static int
intelspi_rxfifo_empty(struct intelspi_softc *sc)
{
uint32_t sssr;
INTELSPI_ASSERT_LOCKED(sc);
sssr = INTELSPI_READ(sc, INTELSPI_SSPREG_SSSR);
if (sssr & SSSR_RNE)
return (0);
else
return (1);
}
static void
intelspi_fill_tx_fifo(struct intelspi_softc *sc)
{
struct spi_command *cmd;
uint32_t written;
uint8_t *data;
INTELSPI_ASSERT_LOCKED(sc);
cmd = sc->sc_cmd;
while (sc->sc_written < sc->sc_len &&
!intelspi_txfifo_full(sc)) {
data = (uint8_t *)cmd->tx_cmd;
written = sc->sc_written++;
if (written >= cmd->tx_cmd_sz) {
data = (uint8_t *)cmd->tx_data;
written -= cmd->tx_cmd_sz;
}
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SSDR, data[written]);
}
}
static void
intelspi_drain_rx_fifo(struct intelspi_softc *sc)
{
struct spi_command *cmd;
uint32_t read;
uint8_t *data;
INTELSPI_ASSERT_LOCKED(sc);
cmd = sc->sc_cmd;
while (sc->sc_read < sc->sc_len &&
!intelspi_rxfifo_empty(sc)) {
data = (uint8_t *)cmd->rx_cmd;
read = sc->sc_read++;
if (read >= cmd->rx_cmd_sz) {
data = (uint8_t *)cmd->rx_data;
read -= cmd->rx_cmd_sz;
}
data[read] = INTELSPI_READ(sc, INTELSPI_SSPREG_SSDR) & 0xff;
}
}
static int
intelspi_transaction_done(struct intelspi_softc *sc)
{
int txfifo_empty;
uint32_t sssr;
INTELSPI_ASSERT_LOCKED(sc);
if (sc->sc_written != sc->sc_len ||
sc->sc_read != sc->sc_len)
return (0);
sssr = INTELSPI_READ(sc, INTELSPI_SSPREG_SSSR);
txfifo_empty = ((sssr & SSSR_TFL_MASK) == 0) &&
(sssr & SSSR_TNF);
if (txfifo_empty && !(sssr & SSSR_RNE))
return (1);
return (0);
}
static int
intelspi_transact(struct intelspi_softc *sc)
{
INTELSPI_ASSERT_LOCKED(sc);
/* TX - Fill up the FIFO. */
intelspi_fill_tx_fifo(sc);
/* RX - Drain the FIFO. */
intelspi_drain_rx_fifo(sc);
/* Check for end of transfer. */
return intelspi_transaction_done(sc);
}
static void
intelspi_intr(void *arg)
{
struct intelspi_softc *sc;
uint32_t reg;
sc = (struct intelspi_softc *)arg;
INTELSPI_LOCK(sc);
if ((sc->sc_flags & INTELSPI_BUSY) == 0) {
INTELSPI_UNLOCK(sc);
return;
}
/* Check if SSP if off */
reg = INTELSPI_READ(sc, INTELSPI_SSPREG_SSSR);
if (reg == 0xffffffffU) {
INTELSPI_UNLOCK(sc);
return;
}
/* Check for end of transfer. */
if (intelspi_transact(sc)) {
/* Disable interrupts */
reg = INTELSPI_READ(sc, INTELSPI_SSPREG_SSCR1);
reg &= ~(SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE);
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SSCR1, reg);
wakeup(sc->sc_dev);
}
INTELSPI_UNLOCK(sc);
}
static void
intelspi_init(struct intelspi_softc *sc)
{
uint32_t reg;
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SSCR0, 0);
/* Manual CS control */
reg = INTELSPI_READ(sc, INTELSPI_SSPREG_SPI_CS_CTRL);
reg &= ~(SPI_CS_CTRL_CS_MASK);
reg |= (SPI_CS_CTRL_SW_MODE | SPI_CS_CTRL_CS_HIGH);
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SPI_CS_CTRL, reg);
/* Set TX/RX FIFO IRQ threshold levels */
reg = SSCR1_TFT(TX_FIFO_THRESHOLD) | SSCR1_RFT(RX_FIFO_THRESHOLD);
/*
* Set SPI mode. This should be part of transaction or sysctl
*/
reg |= SSCR1_MODE_0;
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SSCR1, reg);
/*
* Parent clock on Minowboard Turbot is 50MHz
* divide it by 5 to set to more or less reasonable
* value. But this should be part of transaction config
* or sysctl
*/
reg = SSCR0_SCR(CLOCK_DIV_10MHZ);
/* Put SSP in SPI mode */
reg |= SSCR0_FRF_SPI;
/* Data size */
reg |= SSCR0_DSS(DATA_SIZE_8BITS);
/* Enable SSP */
reg |= SSCR0_SSE;
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SSCR0, reg);
}
static void
intelspi_set_cs(struct intelspi_softc *sc, int level)
{
uint32_t reg;
reg = INTELSPI_READ(sc, INTELSPI_SSPREG_SPI_CS_CTRL);
reg &= ~(SPI_CS_CTRL_CS_MASK);
reg |= SPI_CS_CTRL_SW_MODE;
if (level == CS_HIGH)
reg |= SPI_CS_CTRL_CS_HIGH;
else
reg |= SPI_CS_CTRL_CS_LOW;
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SPI_CS_CTRL, reg);
}
static int
intelspi_transfer(device_t dev, device_t child, struct spi_command *cmd)
{
struct intelspi_softc *sc;
int err;
uint32_t sscr1;
sc = device_get_softc(dev);
err = 0;
KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz,
("TX/RX command sizes should be equal"));
KASSERT(cmd->tx_data_sz == cmd->rx_data_sz,
("TX/RX data sizes should be equal"));
INTELSPI_LOCK(sc);
/* If the controller is in use wait until it is available. */
while (sc->sc_flags & INTELSPI_BUSY) {
err = mtx_sleep(dev, &sc->sc_mtx, 0, "intelspi", 0);
if (err == EINTR) {
INTELSPI_UNLOCK(sc);
return (err);
}
}
/* Now we have control over SPI controller. */
sc->sc_flags = INTELSPI_BUSY;
/* Save a pointer to the SPI command. */
sc->sc_cmd = cmd;
sc->sc_read = 0;
sc->sc_written = 0;
sc->sc_len = cmd->tx_cmd_sz + cmd->tx_data_sz;
/* Enable CS */
intelspi_set_cs(sc, CS_LOW);
/* Transfer as much as possible to FIFOs */
if (!intelspi_transact(sc)) {
/* If FIFO is not large enough - enable interrupts */
sscr1 = INTELSPI_READ(sc, INTELSPI_SSPREG_SSCR1);
sscr1 |= (SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE);
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SSCR1, sscr1);
/* and wait for transaction to complete */
err = mtx_sleep(dev, &sc->sc_mtx, 0, "intelspi", hz * 2);
}
/* de-asser CS */
intelspi_set_cs(sc, CS_HIGH);
/* Clear transaction details */
sc->sc_cmd = NULL;
sc->sc_read = 0;
sc->sc_written = 0;
sc->sc_len = 0;
/* Make sure the SPI engine and interrupts are disabled. */
sscr1 = INTELSPI_READ(sc, INTELSPI_SSPREG_SSCR1);
sscr1 &= ~(SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE);
INTELSPI_WRITE(sc, INTELSPI_SSPREG_SSCR1, sscr1);
/* Release the controller and wakeup the next thread waiting for it. */
sc->sc_flags = 0;
wakeup_one(dev);
INTELSPI_UNLOCK(sc);
/*
* Check for transfer timeout. The SPI controller doesn't
* return errors.
*/
if (err == EWOULDBLOCK) {
device_printf(sc->sc_dev, "transfer timeout\n");
err = EIO;
}
return (err);
}
static int
intelspi_probe(device_t dev)
{
static char *gpio_ids[] = { "80860F0E", NULL };
int rv;
if (acpi_disabled("spi") )
return (ENXIO);
rv = ACPI_ID_PROBE(device_get_parent(dev), dev, gpio_ids, NULL);
if (rv <= 0)
device_set_desc(dev, "Intel SPI Controller");
return (rv);
}
static int
intelspi_attach(device_t dev)
{
struct intelspi_softc *sc;
sc = device_get_softc(dev);
sc->sc_dev = dev;
sc->sc_handle = acpi_get_handle(dev);
INTELSPI_LOCK_INIT(sc);
sc->sc_mem_rid = 0;
sc->sc_mem_res = bus_alloc_resource_any(sc->sc_dev,
SYS_RES_MEMORY, &sc->sc_mem_rid, RF_ACTIVE);
if (sc->sc_mem_res == NULL) {
device_printf(dev, "can't allocate memory resource\n");
goto error;
}
sc->sc_irq_rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(sc->sc_dev,
SYS_RES_IRQ, &sc->sc_irq_rid, RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(dev, "can't allocate IRQ resource\n");
goto error;
}
/* Hook up our interrupt handler. */
if (bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
NULL, intelspi_intr, sc, &sc->sc_irq_ih)) {
device_printf(dev, "cannot setup the interrupt handler\n");
goto error;
}
intelspi_init(sc);
device_add_child(dev, "spibus", -1);
return (bus_generic_attach(dev));
error:
INTELSPI_LOCK_DESTROY(sc);
if (sc->sc_mem_res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY,
sc->sc_mem_rid, sc->sc_mem_res);
if (sc->sc_irq_res != NULL)
bus_release_resource(dev, SYS_RES_IRQ,
sc->sc_irq_rid, sc->sc_irq_res);
return (ENXIO);
}
static int
intelspi_detach(device_t dev)
{
struct intelspi_softc *sc;
sc = device_get_softc(dev);
INTELSPI_LOCK_DESTROY(sc);
if (sc->sc_irq_ih)
bus_teardown_intr(dev, sc->sc_irq_res, sc->sc_irq_ih);
if (sc->sc_mem_res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY,
sc->sc_mem_rid, sc->sc_mem_res);
if (sc->sc_irq_res != NULL)
bus_release_resource(dev, SYS_RES_IRQ,
sc->sc_irq_rid, sc->sc_irq_res);
return (bus_generic_detach(dev));
}
static device_method_t intelspi_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, intelspi_probe),
DEVMETHOD(device_attach, intelspi_attach),
DEVMETHOD(device_detach, intelspi_detach),
/* SPI interface */
DEVMETHOD(spibus_transfer, intelspi_transfer),
DEVMETHOD_END
};
static driver_t intelspi_driver = {
"spi",
intelspi_methods,
sizeof(struct intelspi_softc),
};
static devclass_t intelspi_devclass;
DRIVER_MODULE(intelspi, acpi, intelspi_driver, intelspi_devclass, 0, 0);
MODULE_DEPEND(intelspi, acpi, 1, 1, 1);
MODULE_DEPEND(intelspi, spibus, 1, 1, 1);