d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
935ca1ae7c
freebsd-nq/sys/dev/mps/mpi/mpi2_raid.h
Stephen McConnell ef065d89e9 - Updated all files with 2015 Avago copyright, and updated LSI's copyright 
dates.

- Changed all of the PCI device strings from LSI to Avago Technologies (LSI).

- Added a sysctl variable to control how StartStopUnit behavior works. User can
  select to spin down disks based on if disk is SSD or HDD.

- Inquiry data is required to tell if a disk will support SSU at shutdown or
  not. Due to the addition of mpssas_async, which gets Advanced Info but not
  Inquiry data, the setting of supports_SSU was moved to the
  mpssas_scsiio_complete function, which snoops for any Inquiry commands. And,
  since disks are shutdown as a target and not a LUN, this process was
  simplified by basing it on targets and not LUNs.

- Added a sysctl variable that sets the amount of time to retry after sending a
  failed SATA ID command. This helps with some bad disks and large disks that
  require a lot of time to spin up. Part of this change was to add a callout to
  handle timeouts with the SATA ID command. The callout function is called
  mpssas_ata_id_timeout(). (Fixes PR 191348)

- Changed the way resets work by allowing I/O to continue to devices that are
  not currently under a reset condition. This uses devq's instead of simq's and
  makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function
  called mpssas_prepare_tm().

- Some changes were made to reduce code duplication when getting a SAS address
  for a SATA disk.

- Fixed some formatting and whitespace.

- Bump version of mps driver to 20.00.00.00-fbsd

PR:		191348
Reviewed by:	ken, scottl
Approved by:	ken, scottl
MFC after:	2 weeks
2015-02-24 22:07:42 +00:00

336 lines
15 KiB
C
Raw Blame History

/*-
* Copyright (c) 2007-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
/*
* Copyright (c) 2007-2015 LSI Corporation.
* Copyright (c) 2013-2015 Avago Technologies
*
*
* Name: mpi2_raid.h
* Title: MPI Integrated RAID messages and structures
* Creation Date: April 26, 2007
*
* mpi2_raid.h Version: 02.00.05
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 08-31-07 02.00.01 Modifications to RAID Action request and reply,
* including the Actions and ActionData.
* 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
* 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
* the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
* can be sized by the build environment.
* 07-30-09 02.00.04 Added proper define for the Use Default Settings bit of
* VolumeCreationFlags and marked the old one as obsolete.
* 05-12-10 02.00.05 Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_RAID_H
#define MPI2_RAID_H
/*****************************************************************************
*
* Integrated RAID Messages
*
*****************************************************************************/
/****************************************************************************
* RAID Action messages
****************************************************************************/
/* ActionDataWord defines for use with MPI2_RAID_ACTION_DELETE_VOLUME action */
#define MPI2_RAID_ACTION_ADATA_KEEP_LBA0 (0x00000000)
#define MPI2_RAID_ACTION_ADATA_ZERO_LBA0 (0x00000001)
/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
/* ActionDataWord defines for use with MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES action */
#define MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD (0x00000001)
/* ActionDataWord for MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE Action */
typedef struct _MPI2_RAID_ACTION_RATE_DATA
{
U8 RateToChange; /* 0x00 */
U8 RateOrMode; /* 0x01 */
U16 DataScrubDuration; /* 0x02 */
} MPI2_RAID_ACTION_RATE_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_RATE_DATA,
Mpi2RaidActionRateData_t, MPI2_POINTER pMpi2RaidActionRateData_t;
#define MPI2_RAID_ACTION_SET_RATE_RESYNC (0x00)
#define MPI2_RAID_ACTION_SET_RATE_DATA_SCRUB (0x01)
#define MPI2_RAID_ACTION_SET_RATE_POWERSAVE_MODE (0x02)
/* ActionDataWord for MPI2_RAID_ACTION_START_RAID_FUNCTION Action */
typedef struct _MPI2_RAID_ACTION_START_RAID_FUNCTION
{
U8 RAIDFunction; /* 0x00 */
U8 Flags; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_RAID_ACTION_START_RAID_FUNCTION,
MPI2_POINTER PTR_MPI2_RAID_ACTION_START_RAID_FUNCTION,
Mpi2RaidActionStartRaidFunction_t,
MPI2_POINTER pMpi2RaidActionStartRaidFunction_t;
/* defines for the RAIDFunction field */
#define MPI2_RAID_ACTION_START_BACKGROUND_INIT (0x00)
#define MPI2_RAID_ACTION_START_ONLINE_CAP_EXPANSION (0x01)
#define MPI2_RAID_ACTION_START_CONSISTENCY_CHECK (0x02)
/* defines for the Flags field */
#define MPI2_RAID_ACTION_START_NEW (0x00)
#define MPI2_RAID_ACTION_START_RESUME (0x01)
/* ActionDataWord for MPI2_RAID_ACTION_STOP_RAID_FUNCTION Action */
typedef struct _MPI2_RAID_ACTION_STOP_RAID_FUNCTION
{
U8 RAIDFunction; /* 0x00 */
U8 Flags; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
MPI2_POINTER PTR_MPI2_RAID_ACTION_STOP_RAID_FUNCTION,
Mpi2RaidActionStopRaidFunction_t,
MPI2_POINTER pMpi2RaidActionStopRaidFunction_t;
/* defines for the RAIDFunction field */
#define MPI2_RAID_ACTION_STOP_BACKGROUND_INIT (0x00)
#define MPI2_RAID_ACTION_STOP_ONLINE_CAP_EXPANSION (0x01)
#define MPI2_RAID_ACTION_STOP_CONSISTENCY_CHECK (0x02)
/* defines for the Flags field */
#define MPI2_RAID_ACTION_STOP_ABORT (0x00)
#define MPI2_RAID_ACTION_STOP_PAUSE (0x01)
/* ActionDataWord for MPI2_RAID_ACTION_CREATE_HOT_SPARE Action */
typedef struct _MPI2_RAID_ACTION_HOT_SPARE
{
U8 HotSparePool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 DevHandle; /* 0x02 */
} MPI2_RAID_ACTION_HOT_SPARE, MPI2_POINTER PTR_MPI2_RAID_ACTION_HOT_SPARE,
Mpi2RaidActionHotSpare_t, MPI2_POINTER pMpi2RaidActionHotSpare_t;
/* ActionDataWord for MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE Action */
typedef struct _MPI2_RAID_ACTION_FW_UPDATE_MODE
{
U8 Flags; /* 0x00 */
U8 DeviceFirmwareUpdateModeTimeout; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_RAID_ACTION_FW_UPDATE_MODE,
MPI2_POINTER PTR_MPI2_RAID_ACTION_FW_UPDATE_MODE,
Mpi2RaidActionFwUpdateMode_t, MPI2_POINTER pMpi2RaidActionFwUpdateMode_t;
/* ActionDataWord defines for use with MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE action */
#define MPI2_RAID_ACTION_ADATA_DISABLE_FW_UPDATE (0x00)
#define MPI2_RAID_ACTION_ADATA_ENABLE_FW_UPDATE (0x01)
typedef union _MPI2_RAID_ACTION_DATA
{
U32 Word;
MPI2_RAID_ACTION_RATE_DATA Rates;
MPI2_RAID_ACTION_START_RAID_FUNCTION StartRaidFunction;
MPI2_RAID_ACTION_STOP_RAID_FUNCTION StopRaidFunction;
MPI2_RAID_ACTION_HOT_SPARE HotSpare;
MPI2_RAID_ACTION_FW_UPDATE_MODE FwUpdateMode;
} MPI2_RAID_ACTION_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_DATA,
Mpi2RaidActionData_t, MPI2_POINTER pMpi2RaidActionData_t;
/* RAID Action Request Message */
typedef struct _MPI2_RAID_ACTION_REQUEST
{
U8 Action; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 VolDevHandle; /* 0x04 */
U8 PhysDiskNum; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U32 Reserved3; /* 0x0C */
MPI2_RAID_ACTION_DATA ActionDataWord; /* 0x10 */
MPI2_SGE_SIMPLE_UNION ActionDataSGE; /* 0x14 */
} MPI2_RAID_ACTION_REQUEST, MPI2_POINTER PTR_MPI2_RAID_ACTION_REQUEST,
Mpi2RaidActionRequest_t, MPI2_POINTER pMpi2RaidActionRequest_t;
/* RAID Action request Action values */
#define MPI2_RAID_ACTION_INDICATOR_STRUCT (0x01)
#define MPI2_RAID_ACTION_CREATE_VOLUME (0x02)
#define MPI2_RAID_ACTION_DELETE_VOLUME (0x03)
#define MPI2_RAID_ACTION_DISABLE_ALL_VOLUMES (0x04)
#define MPI2_RAID_ACTION_ENABLE_ALL_VOLUMES (0x05)
#define MPI2_RAID_ACTION_PHYSDISK_OFFLINE (0x0A)
#define MPI2_RAID_ACTION_PHYSDISK_ONLINE (0x0B)
#define MPI2_RAID_ACTION_FAIL_PHYSDISK (0x0F)
#define MPI2_RAID_ACTION_ACTIVATE_VOLUME (0x11)
#define MPI2_RAID_ACTION_DEVICE_FW_UPDATE_MODE (0x15)
#define MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE (0x17)
#define MPI2_RAID_ACTION_SET_VOLUME_NAME (0x18)
#define MPI2_RAID_ACTION_SET_RAID_FUNCTION_RATE (0x19)
#define MPI2_RAID_ACTION_ENABLE_FAILED_VOLUME (0x1C)
#define MPI2_RAID_ACTION_CREATE_HOT_SPARE (0x1D)
#define MPI2_RAID_ACTION_DELETE_HOT_SPARE (0x1E)
#define MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED (0x20)
#define MPI2_RAID_ACTION_START_RAID_FUNCTION (0x21)
#define MPI2_RAID_ACTION_STOP_RAID_FUNCTION (0x22)
/* RAID Volume Creation Structure */
/*
* The following define can be customized for the targeted product.
*/
#ifndef MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS
#define MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS (1)
#endif
typedef struct _MPI2_RAID_VOLUME_PHYSDISK
{
U8 RAIDSetNum; /* 0x00 */
U8 PhysDiskMap; /* 0x01 */
U16 PhysDiskDevHandle; /* 0x02 */
} MPI2_RAID_VOLUME_PHYSDISK, MPI2_POINTER PTR_MPI2_RAID_VOLUME_PHYSDISK,
Mpi2RaidVolumePhysDisk_t, MPI2_POINTER pMpi2RaidVolumePhysDisk_t;
/* defines for the PhysDiskMap field */
#define MPI2_RAIDACTION_PHYSDISK_PRIMARY (0x01)
#define MPI2_RAIDACTION_PHYSDISK_SECONDARY (0x02)
typedef struct _MPI2_RAID_VOLUME_CREATION_STRUCT
{
U8 NumPhysDisks; /* 0x00 */
U8 VolumeType; /* 0x01 */
U16 Reserved1; /* 0x02 */
U32 VolumeCreationFlags; /* 0x04 */
U32 VolumeSettings; /* 0x08 */
U8 Reserved2; /* 0x0C */
U8 ResyncRate; /* 0x0D */
U16 DataScrubDuration; /* 0x0E */
U64 VolumeMaxLBA; /* 0x10 */
U32 StripeSize; /* 0x18 */
U8 Name[16]; /* 0x1C */
MPI2_RAID_VOLUME_PHYSDISK PhysDisk[MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS];/* 0x2C */
} MPI2_RAID_VOLUME_CREATION_STRUCT,
MPI2_POINTER PTR_MPI2_RAID_VOLUME_CREATION_STRUCT,
Mpi2RaidVolumeCreationStruct_t, MPI2_POINTER pMpi2RaidVolumeCreationStruct_t;
/* use MPI2_RAID_VOL_TYPE_ defines from mpi2_cnfg.h for VolumeType */
/* defines for the VolumeCreationFlags field */
#define MPI2_RAID_VOL_CREATION_DEFAULT_SETTINGS (0x80000000)
#define MPI2_RAID_VOL_CREATION_BACKGROUND_INIT (0x00000004)
#define MPI2_RAID_VOL_CREATION_LOW_LEVEL_INIT (0x00000002)
#define MPI2_RAID_VOL_CREATION_MIGRATE_DATA (0x00000001)
/* The following is an obsolete define.
* It must be shifted left 24 bits in order to set the proper bit.
*/
#define MPI2_RAID_VOL_CREATION_USE_DEFAULT_SETTINGS (0x80)
/* RAID Online Capacity Expansion Structure */
typedef struct _MPI2_RAID_ONLINE_CAPACITY_EXPANSION
{
U32 Flags; /* 0x00 */
U16 DevHandle0; /* 0x04 */
U16 Reserved1; /* 0x06 */
U16 DevHandle1; /* 0x08 */
U16 Reserved2; /* 0x0A */
} MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
MPI2_POINTER PTR_MPI2_RAID_ONLINE_CAPACITY_EXPANSION,
Mpi2RaidOnlineCapacityExpansion_t,
MPI2_POINTER pMpi2RaidOnlineCapacityExpansion_t;
/* RAID Volume Indicator Structure */
typedef struct _MPI2_RAID_VOL_INDICATOR
{
U64 TotalBlocks; /* 0x00 */
U64 BlocksRemaining; /* 0x08 */
U32 Flags; /* 0x10 */
} MPI2_RAID_VOL_INDICATOR, MPI2_POINTER PTR_MPI2_RAID_VOL_INDICATOR,
Mpi2RaidVolIndicator_t, MPI2_POINTER pMpi2RaidVolIndicator_t;
/* defines for RAID Volume Indicator Flags field */
#define MPI2_RAID_VOL_FLAGS_OP_MASK (0x0000000F)
#define MPI2_RAID_VOL_FLAGS_OP_BACKGROUND_INIT (0x00000000)
#define MPI2_RAID_VOL_FLAGS_OP_ONLINE_CAP_EXPANSION (0x00000001)
#define MPI2_RAID_VOL_FLAGS_OP_CONSISTENCY_CHECK (0x00000002)
#define MPI2_RAID_VOL_FLAGS_OP_RESYNC (0x00000003)
#define MPI2_RAID_VOL_FLAGS_OP_MDC (0x00000004)
/* RAID Action Reply ActionData union */
typedef union _MPI2_RAID_ACTION_REPLY_DATA
{
U32 Word[5];
MPI2_RAID_VOL_INDICATOR RaidVolumeIndicator;
U16 VolDevHandle;
U8 VolumeState;
U8 PhysDiskNum;
} MPI2_RAID_ACTION_REPLY_DATA, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY_DATA,
Mpi2RaidActionReplyData_t, MPI2_POINTER pMpi2RaidActionReplyData_t;
/* use MPI2_RAIDVOL0_SETTING_ defines from mpi2_cnfg.h for MPI2_RAID_ACTION_CHANGE_VOL_WRITE_CACHE action */
/* RAID Action Reply Message */
typedef struct _MPI2_RAID_ACTION_REPLY
{
U8 Action; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 VolDevHandle; /* 0x04 */
U8 PhysDiskNum; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U16 Reserved3; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
MPI2_RAID_ACTION_REPLY_DATA ActionData; /* 0x14 */
} MPI2_RAID_ACTION_REPLY, MPI2_POINTER PTR_MPI2_RAID_ACTION_REPLY,
Mpi2RaidActionReply_t, MPI2_POINTER pMpi2RaidActionReply_t;
#endif
Reference in New Issue View Git Blame Copy Permalink