freebsd-nq/sys/pci/if_en_pci.c
Archie Cobbs 2127f26023 Examine all occurrences of sprintf(), strcat(), and str[n]cpy()
for possible buffer overflow problems. Replaced most sprintf()'s
with snprintf(); for others cases, added terminating NUL bytes where
appropriate, replaced constants like "16" with sizeof(), etc.

These changes include several bug fixes, but most changes are for
maintainability's sake. Any instance where it wasn't "immediately
obvious" that a buffer overflow could not occur was made safer.

Reviewed by:	Bruce Evans <bde@zeta.org.au>
Reviewed by:	Matthew Dillon <dillon@apollo.backplane.com>
Reviewed by:	Mike Spengler <mks@networkcs.com>
1998-12-04 22:54:57 +00:00

346 lines
8.7 KiB
C

/* $NetBSD: if_en_pci.c,v 1.1 1996/06/22 02:00:31 chuck Exp $ */
/*
*
* Copyright (c) 1996 Charles D. Cranor and Washington University.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Charles D. Cranor and
* Washington University.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
*
* i f _ e n _ p c i . c
*
* author: Chuck Cranor <chuck@ccrc.wustl.edu>
* started: spring, 1996.
*
* FreeBSD PCI glue for the eni155p card.
* thanks to Matt Thomas for figuring out FreeBSD vs NetBSD vs etc.. diffs.
*/
#include "en.h"
#include "pci.h"
#if (NEN > 0) && (NPCI > 0)
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#ifndef SHUTDOWN_PRE_SYNC
/*
* device shutdown mechanism has been changed since 2.2-ALPHA.
* if SHUTDOWN_PRE_SYNC is defined in "sys/systm.h", use new one.
* otherwise, use old one.
* new: 2.2-ALPHA, 2.2-BETA, 2.2-GAMME, 2.2-RELEASE, 3.0
* old: 2.1.5, 2.1.6, 2.2-SNAP
* -- kjc
*/
#include <sys/devconf.h>
#endif
#include <sys/malloc.h>
#include <sys/socket.h>
#include <machine/clock.h> /* for DELAY */
#include <net/if.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include <dev/en/midwayreg.h>
#include <dev/en/midwayvar.h>
/*
* prototypes
*/
static void en_pci_attach __P((pcici_t, int));
static char *en_pci_probe __P((pcici_t, pcidi_t));
#ifdef SHUTDOWN_PRE_SYNC
static void en_pci_shutdown __P((int, void *));
#else
static int en_pci_shutdown __P((struct kern_devconf *, int));
#endif
/*
* local structures
*/
struct en_pci_softc {
/* bus independent stuff */
struct en_softc esc; /* includes "device" structure */
/* PCI bus glue */
void *sc_ih; /* interrupt handle */
pci_chipset_tag_t en_pc; /* for PCI calls */
};
/*
* pointers to softcs (we alloc)
*/
static struct en_pci_softc *enpcis[NEN] = {0};
extern struct cfdriver en_cd;
/*
* autoconfig structures
*/
static u_long en_pci_count;
static struct pci_device endevice = {
"en",
en_pci_probe,
en_pci_attach,
&en_pci_count,
#ifdef SHUTDOWN_PRE_SYNC
NULL,
#else
en_pci_shutdown,
#endif
};
DATA_SET (pcidevice_set, endevice);
/*
* local defines (PCI specific stuff)
*/
/*
* address of config base memory address register in PCI config space
* (this is card specific)
*/
#define PCI_CBMA 0x10
/*
* tonga (pci bridge). ENI cards only!
*/
#define EN_TONGA 0x60 /* PCI config addr of tonga reg */
#define TONGA_SWAP_DMA 0x80 /* endian swap control */
#define TONGA_SWAP_BYTE 0x40
#define TONGA_SWAP_WORD 0x20
/*
* adaptec pci bridge. ADP cards only!
*/
#define ADP_PCIREG 0x050040 /* PCI control register */
#define ADP_PCIREG_RESET 0x1 /* reset card */
#define ADP_PCIREG_IENABLE 0x2 /* interrupt enable */
#define ADP_PCIREG_SWAP_WORD 0x4 /* swap byte on slave access */
#define ADP_PCIREG_SWAP_DMA 0x8 /* swap byte on DMA */
#define PCI_VENDOR_EFFICIENTNETS 0x111a /* Efficent Networks */
#define PCI_PRODUCT_EFFICIENTNETS_ENI155PF 0x0000 /* ENI-155P ATM */
#define PCI_PRODUCT_EFFICIENTNETS_ENI155PA 0x0002 /* ENI-155P ATM */
#define PCI_VENDOR_ADP 0x9004 /* adaptec */
#define PCI_PRODUCT_ADP_AIC5900 0x5900
#define PCI_PRODUCT_ADP_AIC5905 0x5905
#define PCI_VENDOR(x) ((x) & 0xFFFF)
#define PCI_CHIPID(x) (((x) >> 16) & 0xFFFF)
#if !defined(MIDWAY_ENIONLY)
static void adp_busreset __P((void *));
/*
* bus specific reset function [ADP only!]
*/
static void adp_busreset(v)
void *v;
{
struct en_softc *sc = (struct en_softc *) v;
u_int32_t dummy;
bus_space_write_4(sc->en_memt, sc->en_base, ADP_PCIREG, ADP_PCIREG_RESET);
DELAY(1000); /* let it reset */
dummy = bus_space_read_4(sc->en_memt, sc->en_base, ADP_PCIREG);
bus_space_write_4(sc->en_memt, sc->en_base, ADP_PCIREG,
(ADP_PCIREG_SWAP_WORD|ADP_PCIREG_SWAP_DMA|ADP_PCIREG_IENABLE));
dummy = bus_space_read_4(sc->en_memt, sc->en_base, ADP_PCIREG);
if ((dummy & (ADP_PCIREG_SWAP_WORD|ADP_PCIREG_SWAP_DMA)) !=
(ADP_PCIREG_SWAP_WORD|ADP_PCIREG_SWAP_DMA))
printf("adp_busreset: Adaptec ATM did NOT reset!\n");
}
#endif
/***********************************************************************/
/*
* autoconfig stuff
*/
static char *en_pci_probe(config_id, device_id)
pcici_t config_id;
pcidi_t device_id;
{
#if !defined(MIDWAY_ADPONLY)
if (PCI_VENDOR(device_id) == PCI_VENDOR_EFFICIENTNETS &&
(PCI_CHIPID(device_id) == PCI_PRODUCT_EFFICIENTNETS_ENI155PF ||
PCI_CHIPID(device_id) == PCI_PRODUCT_EFFICIENTNETS_ENI155PA))
return "Efficient Networks ENI-155p";
#endif
#if !defined(MIDWAY_ENIONLY)
if (PCI_VENDOR(device_id) == PCI_VENDOR_ADP &&
(PCI_CHIPID(device_id) == PCI_PRODUCT_ADP_AIC5900 ||
PCI_CHIPID(device_id) == PCI_PRODUCT_ADP_AIC5905))
return "Adaptec 155 ATM";
#endif
return 0;
}
static void en_pci_attach(config_id, unit)
pcici_t config_id;
int unit;
{
struct en_softc *sc;
struct en_pci_softc *scp;
pcidi_t device_id;
int retval;
vm_offset_t pa;
if (unit >= NEN) {
printf("en%d: not configured; kernel is built for only %d device%s.\n",
unit, NEN, NEN == 1 ? "" : "s");
return;
}
scp = (struct en_pci_softc *) malloc(sizeof(*scp), M_DEVBUF, M_NOWAIT);
if (scp == NULL)
return;
bzero(scp, sizeof(*scp)); /* zero */
sc = &scp->esc;
retval = pci_map_mem(config_id, PCI_CBMA, (vm_offset_t *) &sc->en_base, &pa);
if (!retval) {
free((caddr_t) scp, M_DEVBUF);
return;
}
enpcis[unit] = scp; /* lock it in */
en_cd.cd_devs[unit] = sc; /* fake a cfdriver structure */
en_cd.cd_ndevs = NEN;
snprintf(sc->sc_dev.dv_xname, sizeof(sc->sc_dev.dv_xname), "en%d", unit);
sc->enif.if_unit = unit;
sc->enif.if_name = "en";
/*
* figure out if we are an adaptec card or not.
* XXX: why do we have to re-read PC_ID_REG when en_pci_probe already
* had that info?
*/
device_id = pci_conf_read(config_id, PCI_ID_REG);
sc->is_adaptec = (PCI_VENDOR(device_id) == PCI_VENDOR_ADP) ? 1 : 0;
#ifdef SHUTDOWN_PRE_SYNC
/*
* Add shutdown hook so that DMA is disabled prior to reboot. Not
* doing so could allow DMA to corrupt kernel memory during the
* reboot before the driver initializes.
*/
at_shutdown(en_pci_shutdown, scp, SHUTDOWN_POST_SYNC);
#endif
if (!pci_map_int(config_id, en_intr, (void *) sc, &net_imask)) {
printf("%s: couldn't establish interrupt\n", sc->sc_dev.dv_xname);
return;
}
sc->ipl = 1; /* XXX */
/*
* set up pci bridge
*/
#if !defined(MIDWAY_ENIONLY)
if (sc->is_adaptec) {
sc->en_busreset = adp_busreset;
adp_busreset(sc);
}
#endif
#if !defined(MIDWAY_ADPONLY)
if (!sc->is_adaptec) {
sc->en_busreset = NULL;
pci_conf_write(config_id, EN_TONGA, (TONGA_SWAP_DMA|TONGA_SWAP_WORD));
}
#endif
/*
* done PCI specific stuff
*/
en_attach(sc);
}
#ifdef SHUTDOWN_PRE_SYNC
static void
en_pci_shutdown(
int howto,
void *sc)
{
struct en_pci_softc *psc = (struct en_pci_softc *)sc;
en_reset(&psc->esc);
DELAY(10);
}
#else /* !SHUTDOWN_PRE_SYNC */
static int
en_pci_shutdown(kdc, force)
struct kern_devconf *kdc;
int force;
{
if (kdc->kdc_unit < NEN) {
struct en_pci_softc *psc = enpcis[kdc->kdc_unit];
if (psc) /* can it be null? */
en_reset(&psc->esc);
DELAY(10);
}
dev_detach(kdc);
return(0);
}
#endif /* !SHUTDOWN_PRE_SYNC */
#endif /* NEN > 0 && NPCI > 0 */