cd46a114fc
1. rt_check() cleanup:
rt_check() is only necessary for some address families to gain access
to the corresponding arp entry, so call it only in/near the *resolve()
routines where it is actually used -- at the moment this is
arpresolve(), nd6_storelladdr() (the call is embedded here),
and atmresolve() (the call is just before atmresolve to reduce
the number of changes).
This change will make it a lot easier to decouple the arp table
from the routing table.
There is an extra call to rt_check() in if_iso88025subr.c to
determine the routing info length. I have left it alone for
the time being.
The interface of arpresolve() and nd6_storelladdr() now changes slightly:
+ the 'rtentry' parameter (really a hint from the upper level layer)
is now passed unchanged from *_output(), so it becomes the route
to the final destination and not to the gateway.
+ the routines will return 0 if resolution is possible, non-zero
otherwise.
+ arpresolve() returns EWOULDBLOCK in case the mbuf is being held
waiting for an arp reply -- in this case the error code is masked
in the caller so the upper layer protocol will not see a failure.
2. arpcom untangling
Where possible, use 'struct ifnet' instead of 'struct arpcom' variables,
and use the IFP2AC macro to access arpcom fields.
This mostly affects the netatalk code.
=== Detailed changes: ===
net/if_arcsubr.c
rt_check() cleanup, remove a useless variable
net/if_atmsubr.c
rt_check() cleanup
net/if_ethersubr.c
rt_check() cleanup, arpcom untangling
net/if_fddisubr.c
rt_check() cleanup, arpcom untangling
net/if_iso88025subr.c
rt_check() cleanup
netatalk/aarp.c
arpcom untangling, remove a block of duplicated code
netatalk/at_extern.h
arpcom untangling
netinet/if_ether.c
rt_check() cleanup (change arpresolve)
netinet6/nd6.c
rt_check() cleanup (change nd6_storelladdr)
|
||
|---|---|---|
| .. | ||
| ah6.h | ||
| ah_aesxcbcmac.c | ||
| ah_aesxcbcmac.h | ||
| ah_core.c | ||
| ah_input.c | ||
| ah_output.c | ||
| ah.h | ||
| dest6.c | ||
| esp6.h | ||
| esp_aesctr.c | ||
| esp_aesctr.h | ||
| esp_core.c | ||
| esp_input.c | ||
| esp_output.c | ||
| esp_rijndael.c | ||
| esp_rijndael.h | ||
| esp.h | ||
| frag6.c | ||
| icmp6.c | ||
| icmp6.h | ||
| in6_cksum.c | ||
| in6_gif.c | ||
| in6_gif.h | ||
| in6_ifattach.c | ||
| in6_ifattach.h | ||
| in6_pcb.c | ||
| in6_pcb.h | ||
| in6_prefix.c | ||
| in6_prefix.h | ||
| in6_proto.c | ||
| in6_rmx.c | ||
| in6_src.c | ||
| in6_var.h | ||
| in6.c | ||
| in6.h | ||
| ip6_ecn.h | ||
| ip6_forward.c | ||
| ip6_fw.c | ||
| ip6_fw.h | ||
| ip6_id.c | ||
| ip6_input.c | ||
| ip6_mroute.c | ||
| ip6_mroute.h | ||
| ip6_output.c | ||
| ip6_var.h | ||
| ip6.h | ||
| ip6protosw.h | ||
| ipcomp6.h | ||
| ipcomp_core.c | ||
| ipcomp_input.c | ||
| ipcomp_output.c | ||
| ipcomp.h | ||
| ipsec6.h | ||
| ipsec.c | ||
| ipsec.h | ||
| mld6_var.h | ||
| mld6.c | ||
| nd6_nbr.c | ||
| nd6_rtr.c | ||
| nd6.c | ||
| nd6.h | ||
| pim6_var.h | ||
| pim6.h | ||
| raw_ip6.c | ||
| raw_ip6.h | ||
| README | ||
| route6.c | ||
| scope6_var.h | ||
| scope6.c | ||
| tcp6_var.h | ||
| udp6_output.c | ||
| udp6_usrreq.c | ||
| udp6_var.h | ||
a note to committers about KAME tree $FreeBSD$ KAME project FreeBSD IPv6/IPsec tree is from KAMEproject (http://www.kame.net/). To synchronize KAME tree and FreeBSD better today and in the future, please understand the following: - DO NOT MAKE COSTMETIC CHANGES. "Cosmetic changes" here includes tabify, untabify, removal of space at EOL, minor KNF items, and whatever adds more output lines on "diff freebsd kame". To make future synchronization easier. it is critical to preserve certain statements in the code. Also, as KAME tree supports all 4 BSDs (Free, Open, Net, BSD/OS) in single shared tree, it is not always possible to backport FreeBSD changes into KAME tree. So again, please do not make cosmetic changes. Even if you think it a right thing, that will bite KAME guys badly during upgrade attempts, and prevent us from synchronizing two trees. (you don't usually make cosmetic changes against third-party code, do you?) - REPORT CHANGES/BUGS TO KAME GUYS. It is not always possible for KAME guys to watch all the freebsd mailing list traffic, as the traffic is HUGE. So if possible, please, inform kame guys of changes you made in IPv6/IPsec related portion. Contact path would be snap-users@kame.net or KAME PR database on www.kame.net. (or to core@kame.net if it is necessary to make it confidential) Thank you for your cooperation and have a happy IPv6 life! Note: KAME-origin code is in the following locations. The above notice applies to corresponding manpages too. The list may not be complete. If you see $KAME$ in the code, it is from KAME distribution. If you see some file that is IPv6/IPsec related, it is highly possible that the file is from KAME distribution. include/ifaddrs.h lib/libc/net lib/libc/net/getaddrinfo.c lib/libc/net/getifaddrs.c lib/libc/net/getnameinfo.c lib/libc/net/ifname.c lib/libc/net/ip6opt.c lib/libc/net/map_v4v6.c lib/libc/net/name6.c lib/libftpio lib/libipsec sbin/ip6fw sbin/ping6 sbin/rtsol share/doc/IPv6 share/man/man4/ip6.4 share/man/man4/inet6.4 sys/crypto (except sys/crypto/rc4) sys/kern/uipc_mbuf2.c sys/net/if_faith.[ch] sys/net/if_gif.[ch] sys/net/if_stf.[ch] sys/net/pfkeyv2.h sys/netinet/icmp6.h sys/netinet/in_gif.[ch] sys/netinet/ip6.h sys/netinet/ip_encap.[ch] sys/netinet6 sys/netkey usr.sbin/faithd usr.sbin/gifconfig usr.sbin/ifmcstat usr.sbin/mld6query usr.sbin/ndp usr.sbin/pim6dd usr.sbin/pim6sd usr.sbin/prefix usr.sbin/rip6query usr.sbin/route6d usr.sbin/rrenumd usr.sbin/rtadvd usr.sbin/rtsold usr.sbin/scope6config usr.sbin/setkey usr.sbin/traceroute6