freebsd-nq/sys/dev/ct/ctvar.h
Yoshihiro Takahashi bedee18193 Added another wd33c93 based SCSI card driver which replaces the bs driver.
Now, default is still bs.

Submitted by:	nyan and non.
Obtained from:	NetBSD/pc98
2001-02-27 12:34:01 +00:00

128 lines
4.2 KiB
C

/* $FreeBSD$ */
/* $NecBSD: ctvar.h,v 1.4 1999/04/15 01:36:13 kmatsuda Exp $ */
/* $NetBSD$ */
/*
* [NetBSD for NEC PC-98 series]
* Copyright (c) 1995, 1996, 1997, 1998
* NetBSD/pc98 porting staff. All rights reserved.
* Copyright (c) 1995, 1996, 1997, 1998
* Naofumi HONDA. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _CTVAR_H_
#define _CTVAR_H_
/*
* ctvar.h
* Generic wd33c93 chip driver's definitions
*/
/*****************************************************************
* Host adapter structure
*****************************************************************/
struct ct_softc {
struct scsi_low_softc sc_sclow; /* generic data */
struct resource *port_res;
struct resource *mem_res;
struct resource *irq_res;
struct resource *drq_res;
bus_space_tag_t sc_iot; /* core chip ctrl port tag */
bus_space_tag_t sc_datat; /* data port tag (pio) */
bus_space_tag_t sc_memt; /* data port tag (shm) */
bus_dma_tag_t sc_dmat; /* data DMA tag */
bus_dmamap_t sc_dmamapt; /* data DMAMAP tag */
bus_space_handle_t sc_ioh;
bus_space_handle_t sc_datah;
bus_space_handle_t sc_memh;
void *sc_ih;
int sc_wc; /* weight counter */
int sc_chiprev; /* chip version */
#define CT_WD33C93_A 0x00000
#define CT_WD33C93_B 0x10000
#define CT_WD33C93_C 0x20000
int sc_xmode;
#define CT_XMODE_PIO 1
#define CT_XMODE_DMA 2
int sc_dma; /* dma transfer start */
#define CT_DMA_PIOSTART 1
#define CT_DMA_DMASTART 2
int sc_satgo; /* combination cmd start */
#define CT_SAT_GOING 1
int sc_atten; /* attention */
u_int8_t sc_creg; /* control register value */
int sc_chipclk; /* chipclk 0, 10, 15, 20 */
struct ct_synch_data {
u_int cs_period;
u_int cs_syncr;
} *sc_sdp; /* synchronous data table pt */
/*
* Machdep stuff.
*/
void *ct_hw; /* point to bshw_softc etc ... */
void (*ct_dma_xfer_start) __P((struct ct_softc *));
void (*ct_pio_xfer_start) __P((struct ct_softc *));
void (*ct_dma_xfer_stop) __P((struct ct_softc *));
void (*ct_pio_xfer_stop) __P((struct ct_softc *));
void (*ct_bus_reset) __P((struct ct_softc *));
void (*ct_synch_setup) __P((struct ct_softc *, struct lun_info *));
};
/*****************************************************************
* Target information
*****************************************************************/
struct ct_targ_info {
struct targ_info cti_ti;
u_int8_t cti_syncreg;
};
/*****************************************************************
* PROTO
*****************************************************************/
#ifdef __NetBSD__
#include <i386/Cbus/dev/ct/ct_machdep.h>
#endif
#ifdef __FreeBSD__
#include <dev/ct/ct_machdep.h>
#endif
int ctprobesubr __P((bus_space_tag_t, bus_space_handle_t ioh, u_int, int, u_int));
void ctattachsubr __P((struct ct_softc *));
int ctprint __P((void *, const char *));
int ctintr __P((void *));
#endif /* !_CTVAR_H_ */