d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
9713a7922e
freebsd-nq/sys/dev/trm/trm.c
Olivier Houchard f5ca18bc8c Merge diff between rev 1.08 and rev 1.11 of Tekram driver, this notably add 
support for Tekram DC395U2W cards.
Add a fix submitted by joerg@ to correctly report some errors to CAM.
Use bus_dma instead of the remaining vtophys().
2003-02-20 03:21:34 +00:00

3722 lines
100 KiB
C
Raw Blame History

/*
* O.S : FreeBSD CAM
* FILE NAME : trm.c
* BY : C.L. Huang (ching@tekram.com.tw)
* Erich Chen (erich@tekram.com.tw)
* Description: Device Driver for Tekram SCSI adapters
* DC395U/UW/F ,DC315/U(TRM-S1040)
* DC395U2D/U2W(TRM-S2080)
* PCI SCSI Bus Master Host Adapter
* (SCSI chip set used Tekram ASIC TRM-S1040,TRM-S2080)
*(C)Copyright 1995-2001 Tekram Technology Co.,Ltd.
*/
/*
* HISTORY:
*
* REV# DATE NAME DESCRIPTION
* 1.05 05/01/1999 ERICH CHEN First released for 3.x.x (CAM)
* 1.06 07/29/1999 ERICH CHEN Modify for NEW PCI
* 1.07 12/12/1999 ERICH CHEN Modify for 3.3.x ,DCB no free
* 1.08 06/12/2000 ERICH CHEN Modify for 4.x.x
* 1.09 11/03/2000 ERICH CHEN Modify for 4.1.R ,new sim
* 1.10 10/10/2001 Oscar Feng Fixed CAM rescan hang up bug.
* 1.11 10/13/2001 Oscar Feng Fixed wrong Async speed display bug.
*/
/*
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
/*
* Imported into FreeBSD source repository, and updated to compile under
* FreeBSD-3.0-DEVELOPMENT, by Stefan Esser <se@FreeBSD.Org>, 1996-12-17
*/
/*
* Updated to compile under FreeBSD 5.0-CURRENT by Olivier Houchard
* <doginou@ci0.org>, 2002-03-04
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/queue.h>
#if __FreeBSD_version >= 500000
#include <sys/bio.h>
#endif
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include <machine/resource.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <sys/rman.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <dev/trm/trm.h>
#define trm_reg_read8(reg) bus_space_read_1(pACB->tag, pACB->bsh, reg)
#define trm_reg_read16(reg) bus_space_read_2(pACB->tag, pACB->bsh, reg)
#define trm_reg_read32(reg) bus_space_read_4(pACB->tag, pACB->bsh, reg)
#define trm_reg_write8(value,reg) bus_space_write_1(pACB->tag, pACB->bsh,\
reg, value)
#define trm_reg_write16(value,reg) bus_space_write_2(pACB->tag, pACB->bsh,\
reg, value)
#define trm_reg_write32(value,reg) bus_space_write_4(pACB->tag, pACB->bsh,\
reg, value)
#define PCI_Vendor_ID_TEKRAM 0x1DE1
#define PCI_Device_ID_TRM_S1040 0x0391
#define PCI_DEVICEID_TRMS1040 0x03911DE1
#define PCI_DEVICEID_TRMS2080 0x03921DE1
#ifdef trm_DEBUG1
#define TRM_DPRINTF(fmt, arg...) printf("trm: " fmt, ##arg)
#else
#define TRM_DPRINTF(fmt, arg...) {}
#endif /* TRM_DEBUG */
static void trm_check_eeprom(PNVRAMTYPE pEEpromBuf,PACB pACB);
static void NVRAM_trm_read_all(PNVRAMTYPE pEEpromBuf,PACB pACB);
static u_int8_t NVRAM_trm_get_data(PACB pACB, u_int8_t bAddr);
static void NVRAM_trm_write_all(PNVRAMTYPE pEEpromBuf,PACB pACB);
static void NVRAM_trm_set_data(PACB pACB, u_int8_t bAddr, u_int8_t bData);
static void NVRAM_trm_write_cmd(PACB pACB, u_int8_t bCmd, u_int8_t bAddr);
static void NVRAM_trm_wait_30us(PACB pACB);
static void trm_Interrupt(void *vpACB);
static void trm_DataOutPhase0(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_DataInPhase0(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_CommandPhase0(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_StatusPhase0(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_MsgOutPhase0(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_MsgInPhase0(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_DataOutPhase1(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_DataInPhase1(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_CommandPhase1(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_StatusPhase1(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_MsgOutPhase1(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_MsgInPhase1(PACB pACB, PSRB pSRB,
u_int16_t * pscsi_status);
static void trm_Nop0(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status);
static void trm_Nop1(PACB pACB, PSRB pSRB, u_int16_t * pscsi_status);
static void trm_SetXferRate(PACB pACB, PSRB pSRB,PDCB pDCB);
static void trm_DataIO_transfer(PACB pACB, PSRB pSRB, u_int16_t ioDir);
static void trm_Disconnect(PACB pACB);
static void trm_Reselect(PACB pACB);
static void trm_SRBdone(PACB pACB, PDCB pDCB, PSRB pSRB);
static void trm_DoingSRB_Done(PACB pACB);
static void trm_ScsiRstDetect(PACB pACB);
static void trm_ResetSCSIBus(PACB pACB);
static void trm_RequestSense(PACB pACB, PDCB pDCB, PSRB pSRB);
static void trm_EnableMsgOutAbort2(PACB pACB, PSRB pSRB);
static void trm_EnableMsgOutAbort1(PACB pACB, PSRB pSRB);
static void trm_SendSRB(PACB pACB, PSRB pSRB);
static int trm_probe(device_t tag);
static int trm_attach(device_t tag);
static void trm_reset(PACB pACB);
static u_int16_t trm_StartSCSI(PACB pACB, PDCB pDCB, PSRB pSRB);
static int trm_initAdapter(PACB pACB, u_int16_t unit);
static void trm_initDCB(PACB pACB, PDCB pDCB, u_int16_t unit,
u_int32_t i, u_int32_t j);
static int trm_initSRB(PACB pACB);
static void trm_initACB(PACB pACB, u_int8_t adaptType, u_int16_t unit);
/* CAM SIM entry points */
#define ccb_trmsrb_ptr spriv_ptr0
#define ccb_trmacb_ptr spriv_ptr1
static void trm_action(struct cam_sim *psim, union ccb *pccb);
static void trm_poll(struct cam_sim *psim);
static void * trm_SCSI_phase0[] = {
trm_DataOutPhase0, /* phase:0 */
trm_DataInPhase0, /* phase:1 */
trm_CommandPhase0, /* phase:2 */
trm_StatusPhase0, /* phase:3 */
trm_Nop0, /* phase:4 */
trm_Nop1, /* phase:5 */
trm_MsgOutPhase0, /* phase:6 */
trm_MsgInPhase0, /* phase:7 */
};
/*
*
* stateV = (void *) trm_SCSI_phase1[phase]
*
*/
static void * trm_SCSI_phase1[] = {
trm_DataOutPhase1, /* phase:0 */
trm_DataInPhase1, /* phase:1 */
trm_CommandPhase1, /* phase:2 */
trm_StatusPhase1, /* phase:3 */
trm_Nop0, /* phase:4 */
trm_Nop1, /* phase:5 */
trm_MsgOutPhase1, /* phase:6 */
trm_MsgInPhase1, /* phase:7 */
};
NVRAMTYPE trm_eepromBuf[TRM_MAX_ADAPTER_NUM];
/*
*Fast20: 000 50ns, 20.0 Mbytes/s
* 001 75ns, 13.3 Mbytes/s
* 010 100ns, 10.0 Mbytes/s
* 011 125ns, 8.0 Mbytes/s
* 100 150ns, 6.6 Mbytes/s
* 101 175ns, 5.7 Mbytes/s
* 110 200ns, 5.0 Mbytes/s
* 111 250ns, 4.0 Mbytes/s
*
*Fast40: 000 25ns, 40.0 Mbytes/s
* 001 50ns, 20.0 Mbytes/s
* 010 75ns, 13.3 Mbytes/s
* 011 100ns, 10.0 Mbytes/s
* 100 125ns, 8.0 Mbytes/s
* 101 150ns, 6.6 Mbytes/s
* 110 175ns, 5.7 Mbytes/s
* 111 200ns, 5.0 Mbytes/s
*/
/* real period: */
u_int8_t dc395x_clock_period[] = {
12,/* 48 ns 20 MB/sec */
18,/* 72 ns 13.3 MB/sec */
25,/* 100 ns 10.0 MB/sec */
31,/* 124 ns 8.0 MB/sec */
37,/* 148 ns 6.6 MB/sec */
43,/* 172 ns 5.7 MB/sec */
50,/* 200 ns 5.0 MB/sec */
62 /* 248 ns 4.0 MB/sec */
};
u_int8_t dc395u2x_clock_period[]={
10,/* 25 ns 40.0 MB/sec */
12,/* 48 ns 20.0 MB/sec */
18,/* 72 ns 13.3 MB/sec */
25,/* 100 ns 10.0 MB/sec */
31,/* 124 ns 8.0 MB/sec */
37,/* 148 ns 6.6 MB/sec */
43,/* 172 ns 5.7 MB/sec */
50,/* 200 ns 5.0 MB/sec */
};
#define dc395x_tinfo_period dc395x_clock_period
#define dc395u2x_tinfo_period dc395u2x_clock_period
static PSRB
trm_GetSRB(PACB pACB)
{
int intflag;
PSRB pSRB;
intflag = splcam();
pSRB = pACB->pFreeSRB;
if (pSRB) {
pACB->pFreeSRB = pSRB->pNextSRB;
pSRB->pNextSRB = NULL;
}
splx(intflag);
return (pSRB);
}
static void
trm_RewaitSRB0(PDCB pDCB, PSRB pSRB)
{
PSRB psrb1;
int intflag;
intflag = splcam();
if ((psrb1 = pDCB->pWaitingSRB)) {
pSRB->pNextSRB = psrb1;
pDCB->pWaitingSRB = pSRB;
} else {
pSRB->pNextSRB = NULL;
pDCB->pWaitingSRB = pSRB;
pDCB->pWaitingLastSRB = pSRB;
}
splx(intflag);
}
static void
trm_RewaitSRB(PDCB pDCB, PSRB pSRB)
{
PSRB psrb1;
int intflag;
intflag = splcam();
pDCB->GoingSRBCnt--;
psrb1 = pDCB->pGoingSRB;
if (pSRB == psrb1)
/*
* if this SRB is GoingSRB
* remove this SRB from GoingSRB Q
*/
pDCB->pGoingSRB = psrb1->pNextSRB;
else {
/*
* if this SRB is not current GoingSRB
* remove this SRB from GoingSRB Q
*/
while (pSRB != psrb1->pNextSRB)
psrb1 = psrb1->pNextSRB;
psrb1->pNextSRB = pSRB->pNextSRB;
if (pSRB == pDCB->pGoingLastSRB)
pDCB->pGoingLastSRB = psrb1;
}
if ((psrb1 = pDCB->pWaitingSRB)) {
/*
* if WaitingSRB Q is not NULL
* Q back this SRB into WaitingSRB
*/
pSRB->pNextSRB = psrb1;
pDCB->pWaitingSRB = pSRB;
} else {
pSRB->pNextSRB = NULL;
pDCB->pWaitingSRB = pSRB;
pDCB->pWaitingLastSRB = pSRB;
}
splx(intflag);
}
static void
trm_DoWaitingSRB(PACB pACB)
{
int intflag;
PDCB ptr, ptr1;
PSRB pSRB;
intflag = splcam();
if (!(pACB->pActiveDCB) &&
!(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV))) {
ptr = pACB->pDCBRunRobin;
if (!ptr) {
ptr = pACB->pLinkDCB;
pACB->pDCBRunRobin = ptr;
}
ptr1 = ptr;
for (;ptr1 ;) {
pACB->pDCBRunRobin = ptr1->pNextDCB;
if (!(ptr1->MaxActiveCommandCnt > ptr1->GoingSRBCnt)
|| !(pSRB = ptr1->pWaitingSRB)) {
if (pACB->pDCBRunRobin == ptr)
break;
ptr1 = ptr1->pNextDCB;
} else {
if (!trm_StartSCSI(pACB, ptr1, pSRB)) {
/*
* If trm_StartSCSI return 0 :
* current interrupt status is interrupt enable
* It's said that SCSI processor is unoccupied
*/
ptr1->GoingSRBCnt++;
if (ptr1->pWaitingLastSRB == pSRB) {
ptr1->pWaitingSRB = NULL;
ptr1->pWaitingLastSRB = NULL;
} else
ptr1->pWaitingSRB = pSRB->pNextSRB;
pSRB->pNextSRB = NULL;
if (ptr1->pGoingSRB)
ptr1->pGoingLastSRB->pNextSRB = pSRB;
else
ptr1->pGoingSRB = pSRB;
ptr1->pGoingLastSRB = pSRB;
}
break;
}
}
}
splx(intflag);
return;
}
static void
trm_SRBwaiting(PDCB pDCB, PSRB pSRB)
{
if (pDCB->pWaitingSRB) {
pDCB->pWaitingLastSRB->pNextSRB = pSRB;
pDCB->pWaitingLastSRB = pSRB;
pSRB->pNextSRB = NULL;
} else {
pDCB->pWaitingSRB = pSRB;
pDCB->pWaitingLastSRB = pSRB;
}
}
static u_int32_t
trm_get_sense_bufaddr(PACB pACB, PSRB pSRB)
{
int offset;
offset = pSRB->TagNumber;
return (pACB->sense_busaddr +
(offset * sizeof(struct scsi_sense_data)));
}
static struct scsi_sense_data *
trm_get_sense_buf(PACB pACB, PSRB pSRB)
{
int offset;
offset = pSRB->TagNumber;
return (&pACB->sense_buffers[offset]);
}
static void
trm_ExecuteSRB(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
{
int flags;
PACB pACB;
PSRB pSRB;
union ccb *ccb;
u_long totalxferlen=0;
flags = splcam();
pSRB = (PSRB)arg;
ccb = pSRB->pccb;
pACB = (PACB)ccb->ccb_h.ccb_trmacb_ptr;
TRM_DPRINTF("trm_ExecuteSRB..........\n");
if (nseg != 0) {
PSEG psg;
bus_dma_segment_t *end_seg;
bus_dmasync_op_t op;
/* Copy the segments into our SG list */
end_seg = dm_segs + nseg;
psg = pSRB->pSRBSGL;
while (dm_segs < end_seg) {
psg->address = dm_segs->ds_addr;
psg->length = (u_long)dm_segs->ds_len;
totalxferlen += dm_segs->ds_len;
psg++;
dm_segs++;
}
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN) {
op = BUS_DMASYNC_PREREAD;
} else {
op = BUS_DMASYNC_PREWRITE;
}
bus_dmamap_sync(pACB->buffer_dmat, pSRB->dmamap, op);
}
pSRB->RetryCnt = 0;
pSRB->SRBTotalXferLength = totalxferlen;
pSRB->SRBSGCount = nseg;
pSRB->SRBSGIndex = 0;
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = 0;
pSRB->MsgCnt = 0;
pSRB->SRBStatus = 0;
pSRB->SRBFlag = 0;
pSRB->SRBState = 0;
pSRB->ScsiPhase = PH_BUS_FREE; /* SCSI bus free Phase */
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
if (nseg != 0)
bus_dmamap_unload(pACB->buffer_dmat, pSRB->dmamap);
pSRB->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB = pSRB;
xpt_done(ccb);
splx(flags);
return;
}
ccb->ccb_h.status |= CAM_SIM_QUEUED;
#if 0
/* XXX Need a timeout handler */
ccb->ccb_h.timeout_ch = timeout(trmtimeout, (caddr_t)srb, (ccb->ccb_h.timeout * hz) / 1000);
#endif
trm_SendSRB(pACB, pSRB);
splx(flags);
return;
}
static void
trm_SendSRB(PACB pACB, PSRB pSRB)
{
PDCB pDCB;
pDCB = pSRB->pSRBDCB;
if (!(pDCB->MaxActiveCommandCnt > pDCB->GoingSRBCnt) || (pACB->pActiveDCB)
|| (pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV))) {
TRM_DPRINTF("pDCB->MaxCommand=%d \n",pDCB->MaxActiveCommandCnt);
TRM_DPRINTF("pDCB->GoingSRBCnt=%d \n",pDCB->GoingSRBCnt);
TRM_DPRINTF("pACB->pActiveDCB=%8x \n",(u_int)pACB->pActiveDCB);
TRM_DPRINTF("pACB->ACBFlag=%x \n",pACB->ACBFlag);
trm_SRBwaiting(pDCB, pSRB);
goto SND_EXIT;
}
if (pDCB->pWaitingSRB) {
trm_SRBwaiting(pDCB, pSRB);
pSRB = pDCB->pWaitingSRB;
pDCB->pWaitingSRB = pSRB->pNextSRB;
pSRB->pNextSRB = NULL;
}
if (!trm_StartSCSI(pACB, pDCB, pSRB)) {
/*
* If trm_StartSCSI return 0 :
* current interrupt status is interrupt enable
* It's said that SCSI processor is unoccupied
*/
pDCB->GoingSRBCnt++; /* stack waiting SRB*/
if (pDCB->pGoingSRB) {
pDCB->pGoingLastSRB->pNextSRB = pSRB;
pDCB->pGoingLastSRB = pSRB;
} else {
pDCB->pGoingSRB = pSRB;
pDCB->pGoingLastSRB = pSRB;
}
} else {
/*
* If trm_StartSCSI return 1 :
* current interrupt status is interrupt disreenable
* It's said that SCSI processor has more one SRB need to do
*/
trm_RewaitSRB0(pDCB, pSRB);
}
SND_EXIT:
return;
}
static void
trm_action(struct cam_sim *psim, union ccb *pccb)
{
PACB pACB;
int actionflags;
u_int target_id,target_lun;
CAM_DEBUG(pccb->ccb_h.path, CAM_DEBUG_TRACE, ("trm_action\n"));
actionflags = splcam();
pACB = (PACB) cam_sim_softc(psim);
target_id = pccb->ccb_h.target_id;
target_lun = pccb->ccb_h.target_lun;
switch (pccb->ccb_h.func_code) {
case XPT_NOOP:
TRM_DPRINTF(" XPT_NOOP \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Execute the requested I/O operation
*/
case XPT_SCSI_IO: {
PDCB pDCB = NULL;
PSRB pSRB;
struct ccb_scsiio *pcsio;
pcsio = &pccb->csio;
TRM_DPRINTF(" XPT_SCSI_IO \n");
TRM_DPRINTF("trm: target_id= %d target_lun= %d \n"
,target_id, target_lun);
TRM_DPRINTF(
"pACB->scan_devices[target_id][target_lun]= %d \n"
,pACB->scan_devices[target_id][target_lun]);
if((pccb->ccb_h.status & CAM_STATUS_MASK) !=CAM_REQ_INPROG) {
xpt_done(pccb);
splx(actionflags);
return;
}
pDCB = &pACB->DCBarray[target_id][target_lun];
if(!(pDCB->DCBstatus & DS_IN_QUEUE)) {
pACB->scan_devices[target_id][target_lun] = 1;
trm_initDCB(pACB, pDCB, pACB->AdapterUnit,
target_id, target_lun);
}
/*
* Assign an SRB and connect it with this ccb.
*/
pSRB = trm_GetSRB(pACB);
if (!pSRB) {
/* Freeze SIMQ */
pccb->ccb_h.status = CAM_RESRC_UNAVAIL;
xpt_done(pccb);
splx(actionflags);
return;
}
pSRB->pSRBDCB = pDCB;
pccb->ccb_h.ccb_trmsrb_ptr = pSRB;
pccb->ccb_h.ccb_trmacb_ptr = pACB;
pSRB->pccb = pccb;
pSRB->ScsiCmdLen = pcsio->cdb_len;
/*
* move layer of CAM command block to layer of SCSI
* Request Block for SCSI processor command doing
*/
if((pccb->ccb_h.flags & CAM_CDB_POINTER) != 0) {
if((pccb->ccb_h.flags & CAM_CDB_PHYS) == 0) {
bcopy(pcsio->cdb_io.cdb_ptr,pSRB->CmdBlock
,pcsio->cdb_len);
} else {
pccb->ccb_h.status = CAM_REQ_INVALID;
pSRB->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB= pSRB;
xpt_done(pccb);
splx(actionflags);
return;
}
} else
bcopy(pcsio->cdb_io.cdb_bytes,
pSRB->CmdBlock, pcsio->cdb_len);
if ((pccb->ccb_h.flags & CAM_DIR_MASK)
!= CAM_DIR_NONE) {
if ((pccb->ccb_h.flags &
CAM_SCATTER_VALID) == 0) {
if ((pccb->ccb_h.flags
& CAM_DATA_PHYS) == 0) {
int vmflags;
int error;
vmflags = splsoftvm();
error = bus_dmamap_load(
pACB->buffer_dmat,
pSRB->dmamap,
pcsio->data_ptr,
pcsio->dxfer_len,
trm_ExecuteSRB,
pSRB,
0);
if (error == EINPROGRESS) {
xpt_freeze_simq(
pACB->psim,
1);
pccb->ccb_h.status |=
CAM_RELEASE_SIMQ;
}
splx(vmflags);
} else {
struct bus_dma_segment seg;
/* Pointer to physical buffer */
seg.ds_addr =
(bus_addr_t)pcsio->data_ptr;
seg.ds_len = pcsio->dxfer_len;
trm_ExecuteSRB(pSRB, &seg, 1,
0);
}
} else {
/* CAM_SCATTER_VALID */
struct bus_dma_segment *segs;
if ((pccb->ccb_h.flags &
CAM_SG_LIST_PHYS) == 0 ||
(pccb->ccb_h.flags
& CAM_DATA_PHYS) != 0) {
pSRB->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB = pSRB;
pccb->ccb_h.status =
CAM_PROVIDE_FAIL;
xpt_done(pccb);
splx(actionflags);
return;
}
/* cam SG list is physical,
* cam data is virtual
*/
segs = (struct bus_dma_segment *)
pcsio->data_ptr;
trm_ExecuteSRB(pSRB, segs,
pcsio->sglist_cnt, 1);
} /* CAM_SCATTER_VALID */
} else
trm_ExecuteSRB(pSRB, NULL, 0, 0);
}
break;
case XPT_GDEV_TYPE:
TRM_DPRINTF(" XPT_GDEV_TYPE \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
case XPT_GDEVLIST:
TRM_DPRINTF(" XPT_GDEVLIST \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Path routing inquiry
* Path Inquiry CCB
*/
case XPT_PATH_INQ: {
struct ccb_pathinq *cpi = &pccb->cpi;
TRM_DPRINTF(" XPT_PATH_INQ \n");
cpi->version_num = 1;
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = 15 ;
cpi->max_lun = pACB->max_lun; /* 7 or 0 */
cpi->initiator_id = pACB->AdaptSCSIID;
cpi->bus_id = cam_sim_bus(psim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Tekram_TRM", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(psim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(psim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(pccb);
}
break;
/*
* Release a frozen SIM queue
* Release SIM Queue
*/
case XPT_REL_SIMQ:
TRM_DPRINTF(" XPT_REL_SIMQ \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Set Asynchronous Callback Parameters
* Set Asynchronous Callback CCB
*/
case XPT_SASYNC_CB:
TRM_DPRINTF(" XPT_SASYNC_CB \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Set device type information
* Set Device Type CCB
*/
case XPT_SDEV_TYPE:
TRM_DPRINTF(" XPT_SDEV_TYPE \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* (Re)Scan the SCSI Bus
* Rescan the given bus, or bus/target/lun
*/
case XPT_SCAN_BUS:
TRM_DPRINTF(" XPT_SCAN_BUS \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Get EDT entries matching the given pattern
*/
case XPT_DEV_MATCH:
TRM_DPRINTF(" XPT_DEV_MATCH \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Turn on debugging for a bus, target or lun
*/
case XPT_DEBUG:
TRM_DPRINTF(" XPT_DEBUG \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* XPT_ABORT = 0x10, Abort the specified CCB
* Abort XPT request CCB
*/
case XPT_ABORT:
TRM_DPRINTF(" XPT_ABORT \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Reset the specified SCSI bus
* Reset SCSI Bus CCB
*/
case XPT_RESET_BUS: {
int i;
TRM_DPRINTF(" XPT_RESET_BUS \n");
trm_reset(pACB);
pACB->ACBFlag=0;
for (i=0; i<500; i++)
DELAY(1000);
pccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(pccb);
}
break;
/*
* Bus Device Reset the specified SCSI device
* Reset SCSI Device CCB
*/
case XPT_RESET_DEV:
/*
* Don't (yet?) support vendor
* specific commands.
*/
TRM_DPRINTF(" XPT_RESET_DEV \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Terminate the I/O process
* Terminate I/O Process Request CCB
*/
case XPT_TERM_IO:
TRM_DPRINTF(" XPT_TERM_IO \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Scan Logical Unit
*/
case XPT_SCAN_LUN:
TRM_DPRINTF(" XPT_SCAN_LUN \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Get/Set transfer rate/width/disconnection/tag queueing
* settings
* (GET) default/user transfer settings for the target
*/
case XPT_GET_TRAN_SETTINGS: {
struct ccb_trans_settings *cts;
int intflag;
struct trm_transinfo *tinfo;
PDCB pDCB;
TRM_DPRINTF(" XPT_GET_TRAN_SETTINGS \n");
cts = &pccb->cts;
pDCB = &pACB->DCBarray[target_id][target_lun];
intflag = splcam();
/*
* disable interrupt
*/
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) {
/* current transfer settings */
if (pDCB->tinfo.disc_tag & TRM_CUR_DISCENB)
cts->flags = CCB_TRANS_DISC_ENB;
else
cts->flags = 0;/* no tag & disconnect */
if (pDCB->tinfo.disc_tag & TRM_CUR_TAGENB)
cts->flags |= CCB_TRANS_TAG_ENB;
tinfo = &pDCB->tinfo.current;
TRM_DPRINTF("CURRENT: cts->flags= %2x \n",
cts->flags);
} else {
/* default(user) transfer settings */
if (pDCB->tinfo.disc_tag & TRM_USR_DISCENB)
cts->flags = CCB_TRANS_DISC_ENB;
else
cts->flags = 0;
if (pDCB->tinfo.disc_tag & TRM_USR_TAGENB)
cts->flags |= CCB_TRANS_TAG_ENB;
tinfo = &pDCB->tinfo.user;
TRM_DPRINTF("USER: cts->flags= %2x \n",
cts->flags);
}
cts->sync_period = tinfo->period;
cts->sync_offset = tinfo->offset;
cts->bus_width = tinfo->width;
TRM_DPRINTF("pDCB->SyncPeriod: %d \n",
pDCB->SyncPeriod);
TRM_DPRINTF("period: %d \n", tinfo->period);
TRM_DPRINTF("offset: %d \n", tinfo->offset);
TRM_DPRINTF("width: %d \n", tinfo->width);
splx(intflag);
cts->valid = CCB_TRANS_SYNC_RATE_VALID |
CCB_TRANS_SYNC_OFFSET_VALID |
CCB_TRANS_BUS_WIDTH_VALID |
CCB_TRANS_DISC_VALID |
CCB_TRANS_TQ_VALID;
pccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(pccb);
}
break;
/*
* Get/Set transfer rate/width/disconnection/tag queueing
* settings
* (Set) transfer rate/width negotiation settings
*/
case XPT_SET_TRAN_SETTINGS: {
struct ccb_trans_settings *cts;
u_int update_type;
int intflag;
PDCB pDCB;
TRM_DPRINTF(" XPT_SET_TRAN_SETTINGS \n");
cts = &pccb->cts;
update_type = 0;
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0)
update_type |= TRM_TRANS_GOAL;
if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0)
update_type |= TRM_TRANS_USER;
intflag = splcam();
pDCB = &pACB->DCBarray[target_id][target_lun];
if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) {
/*ccb disc enables */
if (update_type & TRM_TRANS_GOAL) {
if ((cts->flags & CCB_TRANS_DISC_ENB)
!= 0)
pDCB->tinfo.disc_tag
|= TRM_CUR_DISCENB;
else
pDCB->tinfo.disc_tag &=
~TRM_CUR_DISCENB;
}
if (update_type & TRM_TRANS_USER) {
if ((cts->flags & CCB_TRANS_DISC_ENB)
!= 0)
pDCB->tinfo.disc_tag
|= TRM_USR_DISCENB;
else
pDCB->tinfo.disc_tag &=
~TRM_USR_DISCENB;
}
}
if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) {
/* if ccb tag q active */
if (update_type & TRM_TRANS_GOAL) {
if ((cts->flags & CCB_TRANS_TAG_ENB)
!= 0)
pDCB->tinfo.disc_tag |=
TRM_CUR_TAGENB;
else
pDCB->tinfo.disc_tag &=
~TRM_CUR_TAGENB;
}
if (update_type & TRM_TRANS_USER) {
if ((cts->flags & CCB_TRANS_TAG_ENB)
!= 0)
pDCB->tinfo.disc_tag |=
TRM_USR_TAGENB;
else
pDCB->tinfo.disc_tag &=
~TRM_USR_TAGENB;
}
}
/* Minimum sync period factor */
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0) {
/* if ccb sync active */
/* TRM-S1040 MinSyncPeriod = 4 clocks/byte */
if ((cts->sync_period != 0) &&
(cts->sync_period < 125))
cts->sync_period = 125;
/* 1/(125*4) minsync 2 MByte/sec */
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID)
!= 0) {
if (cts->sync_offset == 0)
cts->sync_period = 0;
/* TRM-S1040 MaxSyncOffset = 15 bytes*/
if (cts->sync_offset > 15)
cts->sync_offset = 15;
}
}
if ((update_type & TRM_TRANS_USER) != 0) {
pDCB->tinfo.user.period = cts->sync_period;
pDCB->tinfo.user.offset = cts->sync_offset;
pDCB->tinfo.user.width = cts->bus_width;
}
if ((update_type & TRM_TRANS_GOAL) != 0) {
pDCB->tinfo.goal.period = cts->sync_period;
pDCB->tinfo.goal.offset = cts->sync_offset;
pDCB->tinfo.goal.width = cts->bus_width;
}
splx(intflag);
pccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(pccb);
break;
}
/*
* Calculate the geometry parameters for a device give
* the sector size and volume size.
*/
case XPT_CALC_GEOMETRY: {
struct ccb_calc_geometry *ccg;
u_int32_t size_mb;
u_int32_t secs_per_cylinder;
int extended;
TRM_DPRINTF(" XPT_CALC_GEOMETRY \n");
ccg = &pccb->ccg;
size_mb = ccg->volume_size /
((1024L * 1024L) / ccg->block_size);
extended = 1;
if (size_mb > 1024 && extended) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
pccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(pccb);
}
break;
case XPT_ENG_INQ:
TRM_DPRINTF(" XPT_ENG_INQ \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* HBA execute engine request
* This structure must match SCSIIO size
*/
case XPT_ENG_EXEC:
TRM_DPRINTF(" XPT_ENG_EXEC \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* XPT_EN_LUN = 0x30, Enable LUN as a target
* Target mode structures.
*/
case XPT_EN_LUN:
/*
* Don't (yet?) support vendor
* specific commands.
*/
TRM_DPRINTF(" XPT_EN_LUN \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Execute target I/O request
*/
case XPT_TARGET_IO:
/*
* Don't (yet?) support vendor
* specific commands.
*/
TRM_DPRINTF(" XPT_TARGET_IO \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Accept Host Target Mode CDB
*/
case XPT_ACCEPT_TARGET_IO:
/*
* Don't (yet?) support vendor
* specific commands.
*/
TRM_DPRINTF(" XPT_ACCEPT_TARGET_IO \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Continue Host Target I/O Connection
*/
case XPT_CONT_TARGET_IO:
/*
* Don't (yet?) support vendor
* specific commands.
*/
TRM_DPRINTF(" XPT_CONT_TARGET_IO \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Notify Host Target driver of event
*/
case XPT_IMMED_NOTIFY:
TRM_DPRINTF(" XPT_IMMED_NOTIFY \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* Acknowledgement of event
*/
case XPT_NOTIFY_ACK:
TRM_DPRINTF(" XPT_NOTIFY_ACK \n");
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
/*
* XPT_VUNIQUE = 0x80
*/
case XPT_VUNIQUE:
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
default:
pccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(pccb);
break;
}
splx(actionflags);
}
static void
trm_poll(struct cam_sim *psim)
{
}
static void
trm_ResetDevParam(PACB pACB)
{
PDCB pDCB, pdcb;
PNVRAMTYPE pEEpromBuf;
u_int8_t PeriodIndex;
pDCB = pACB->pLinkDCB;
if (pDCB == NULL)
return;
pdcb = pDCB;
do {
pDCB->SyncMode &= ~(SYNC_NEGO_DONE+ WIDE_NEGO_DONE);
pDCB->SyncPeriod = 0;
pDCB->SyncOffset = 0;
pEEpromBuf = &trm_eepromBuf[pACB->AdapterUnit];
pDCB->DevMode =
pEEpromBuf->NvramTarget[pDCB->TargetID].NvmTarCfg0;
pDCB->AdpMode = pEEpromBuf->NvramChannelCfg;
PeriodIndex =
pEEpromBuf->NvramTarget[pDCB->TargetID].NvmTarPeriod & 0x07;
if (pACB->AdaptType == 1) /* is U2? */
pDCB->MaxNegoPeriod = dc395u2x_clock_period[PeriodIndex];
else
pDCB->MaxNegoPeriod = dc395x_clock_period[PeriodIndex];
if ((pDCB->DevMode & NTC_DO_WIDE_NEGO) &&
(pACB->Config & HCC_WIDE_CARD))
pDCB->SyncMode |= WIDE_NEGO_ENABLE;
pDCB = pDCB->pNextDCB;
}
while (pdcb != pDCB);
}
static void
trm_RecoverSRB(PACB pACB)
{
PDCB pDCB, pdcb;
PSRB psrb, psrb2;
u_int16_t cnt, i;
pDCB = pACB->pLinkDCB;
if (pDCB == NULL)
return;
pdcb = pDCB;
do {
cnt = pdcb->GoingSRBCnt;
psrb = pdcb->pGoingSRB;
for (i = 0; i < cnt; i++) {
psrb2 = psrb;
psrb = psrb->pNextSRB;
if (pdcb->pWaitingSRB) {
psrb2->pNextSRB = pdcb->pWaitingSRB;
pdcb->pWaitingSRB = psrb2;
} else {
pdcb->pWaitingSRB = psrb2;
pdcb->pWaitingLastSRB = psrb2;
psrb2->pNextSRB = NULL;
}
}
pdcb->GoingSRBCnt = 0;
pdcb->pGoingSRB = NULL;
pdcb = pdcb->pNextDCB;
}
while (pdcb != pDCB);
}
static void
trm_reset(PACB pACB)
{
int intflag;
u_int16_t i;
TRM_DPRINTF("trm: RESET");
intflag = splcam();
trm_reg_write8(0x00, TRMREG_DMA_INTEN);
trm_reg_write8(0x00, TRMREG_SCSI_INTEN);
trm_ResetSCSIBus(pACB);
for (i = 0; i < 500; i++)
DELAY(1000);
trm_reg_write8(0x7F, TRMREG_SCSI_INTEN);
/* Enable DMA interrupt */
trm_reg_write8(EN_SCSIINTR, TRMREG_DMA_INTEN);
/* Clear DMA FIFO */
trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL);
/* Clear SCSI FIFO */
trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL);
trm_ResetDevParam(pACB);
trm_DoingSRB_Done(pACB);
pACB->pActiveDCB = NULL;
pACB->ACBFlag = 0;/* RESET_DETECT, RESET_DONE ,RESET_DEV */
trm_DoWaitingSRB(pACB);
/* Tell the XPT layer that a bus reset occured */
if (pACB->ppath != NULL)
xpt_async(AC_BUS_RESET, pACB->ppath, NULL);
splx(intflag);
return;
}
static u_int16_t
trm_StartSCSI(PACB pACB, PDCB pDCB, PSRB pSRB)
{
u_int16_t return_code;
u_int8_t scsicommand, i,command,identify_message;
u_int8_t * ptr;
union ccb *pccb;
struct ccb_scsiio *pcsio;
pccb = pSRB->pccb;
pcsio = &pccb->csio;
trm_reg_write8(pACB->AdaptSCSIID, TRMREG_SCSI_HOSTID);
trm_reg_write8(pDCB->TargetID, TRMREG_SCSI_TARGETID);
trm_reg_write8(pDCB->SyncPeriod, TRMREG_SCSI_SYNC);
trm_reg_write8(pDCB->SyncOffset, TRMREG_SCSI_OFFSET);
pSRB->ScsiPhase = PH_BUS_FREE;/* initial phase */
/* Flush FIFO */
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
identify_message = pDCB->IdentifyMsg;
if ((pSRB->CmdBlock[0] == INQUIRY) ||
(pSRB->CmdBlock[0] == REQUEST_SENSE) ||
(pSRB->SRBFlag & AUTO_REQSENSE)) {
if (((pDCB->SyncMode & WIDE_NEGO_ENABLE) &&
!(pDCB->SyncMode & WIDE_NEGO_DONE))
|| ((pDCB->SyncMode & SYNC_NEGO_ENABLE) &&
!(pDCB->SyncMode & SYNC_NEGO_DONE))) {
if (!(pDCB->IdentifyMsg & 7) ||
(pSRB->CmdBlock[0] != INQUIRY)) {
scsicommand = SCMD_SEL_ATNSTOP;
pSRB->SRBState = SRB_MSGOUT;
goto polling;
}
}
/*
* Send identify message
*/
trm_reg_write8((identify_message & 0xBF) ,TRMREG_SCSI_FIFO);
scsicommand = SCMD_SEL_ATN;
pSRB->SRBState = SRB_START_;
} else {
/* not inquiry,request sense,auto request sense */
/*
* Send identify message
*/
trm_reg_write8(identify_message,TRMREG_SCSI_FIFO);
scsicommand = SCMD_SEL_ATN;
pSRB->SRBState = SRB_START_;
if (pDCB->SyncMode & EN_TAG_QUEUING) {
/* Send Tag message */
trm_reg_write8(MSG_SIMPLE_QTAG, TRMREG_SCSI_FIFO);
trm_reg_write8(pSRB->TagNumber, TRMREG_SCSI_FIFO);
scsicommand = SCMD_SEL_ATN3;
}
}
polling:
/*
* Send CDB ..command block .........
*/
if (pSRB->SRBFlag & AUTO_REQSENSE) {
trm_reg_write8(REQUEST_SENSE, TRMREG_SCSI_FIFO);
trm_reg_write8((pDCB->IdentifyMsg << 5), TRMREG_SCSI_FIFO);
trm_reg_write8(0, TRMREG_SCSI_FIFO);
trm_reg_write8(0, TRMREG_SCSI_FIFO);
trm_reg_write8(pcsio->sense_len, TRMREG_SCSI_FIFO);
trm_reg_write8(0, TRMREG_SCSI_FIFO);
} else {
ptr = (u_int8_t *) pSRB->CmdBlock;
for (i = 0; i < pSRB->ScsiCmdLen ; i++) {
command = *ptr++;
trm_reg_write8(command,TRMREG_SCSI_FIFO);
}
}
if (trm_reg_read16(TRMREG_SCSI_STATUS) & SCSIINTERRUPT) {
/*
* If trm_StartSCSI return 1 :
* current interrupt status is interrupt disreenable
* It's said that SCSI processor has more one SRB need to do,
* SCSI processor has been occupied by one SRB.
*/
pSRB->SRBState = SRB_READY;
return_code = 1;
} else {
/*
* If trm_StartSCSI return 0 :
* current interrupt status is interrupt enable
* It's said that SCSI processor is unoccupied
*/
pSRB->ScsiPhase = SCSI_NOP1; /* SCSI bus free Phase */
pACB->pActiveDCB = pDCB;
pDCB->pActiveSRB = pSRB;
return_code = 0;
trm_reg_write16(DO_DATALATCH | DO_HWRESELECT,
TRMREG_SCSI_CONTROL);/* it's important for atn stop*/
/*
* SCSI cammand
*/
trm_reg_write8(scsicommand,TRMREG_SCSI_COMMAND);
}
return (return_code);
}
static void
trm_Interrupt(vpACB)
void *vpACB;
{
PACB pACB;
PDCB pDCB;
PSRB pSRB;
u_int16_t phase;
void (*stateV)(PACB, PSRB, u_int16_t *);
u_int16_t scsi_status=0;
u_int8_t scsi_intstatus;
pACB = vpACB;
scsi_status = trm_reg_read16(TRMREG_SCSI_STATUS);
if (!(scsi_status & SCSIINTERRUPT)) {
TRM_DPRINTF("trm_Interrupt: TRMREG_SCSI_STATUS scsi_status = NULL ,return......");
return;
}
TRM_DPRINTF("scsi_status=%2x,",scsi_status);
scsi_intstatus = trm_reg_read8(TRMREG_SCSI_INTSTATUS);
TRM_DPRINTF("scsi_intstatus=%2x,",scsi_intstatus);
if (scsi_intstatus & (INT_SELTIMEOUT | INT_DISCONNECT)) {
trm_Disconnect(pACB);
return;
}
if (scsi_intstatus & INT_RESELECTED) {
trm_Reselect(pACB);
return;
}
if (scsi_intstatus & INT_SCSIRESET) {
trm_ScsiRstDetect(pACB);
return;
}
if (scsi_intstatus & (INT_BUSSERVICE | INT_CMDDONE)) {
pDCB = pACB->pActiveDCB;
pSRB = pDCB->pActiveSRB;
if (pDCB) {
if (pDCB->DCBFlag & ABORT_DEV_)
trm_EnableMsgOutAbort1(pACB, pSRB);
}
phase = (u_int16_t) pSRB->ScsiPhase; /* phase: */
stateV = (void *) trm_SCSI_phase0[phase];
stateV(pACB, pSRB, &scsi_status);
pSRB->ScsiPhase = scsi_status & PHASEMASK;
/* phase:0,1,2,3,4,5,6,7 */
phase = (u_int16_t) scsi_status & PHASEMASK;
stateV = (void *) trm_SCSI_phase1[phase];
stateV(pACB, pSRB, &scsi_status);
}
}
static void
trm_MsgOutPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
if (pSRB->SRBState & (SRB_UNEXPECT_RESEL+SRB_ABORT_SENT))
*pscsi_status = PH_BUS_FREE;
/*.. initial phase*/
}
static void
trm_MsgOutPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
u_int8_t bval;
u_int16_t i, cnt;
u_int8_t * ptr;
PDCB pDCB;
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
pDCB = pACB->pActiveDCB;
if (!(pSRB->SRBState & SRB_MSGOUT)) {
cnt = pSRB->MsgCnt;
if (cnt) {
ptr = (u_int8_t *) pSRB->MsgOutBuf;
for (i = 0; i < cnt; i++) {
trm_reg_write8(*ptr, TRMREG_SCSI_FIFO);
ptr++;
}
pSRB->MsgCnt = 0;
if ((pDCB->DCBFlag & ABORT_DEV_) &&
(pSRB->MsgOutBuf[0] == MSG_ABORT)) {
pSRB->SRBState = SRB_ABORT_SENT;
}
} else {
bval = MSG_ABORT;
if ((pSRB->CmdBlock[0] == INQUIRY) ||
(pSRB->CmdBlock[0] == REQUEST_SENSE) ||
(pSRB->SRBFlag & AUTO_REQSENSE)) {
if (pDCB->SyncMode & SYNC_NEGO_ENABLE) {
goto mop1;
}
}
trm_reg_write8(bval, TRMREG_SCSI_FIFO);
}
} else {
mop1: /* message out phase */
if (!(pSRB->SRBState & SRB_DO_WIDE_NEGO)
&& (pDCB->SyncMode & WIDE_NEGO_ENABLE)) {
/*
* WIDE DATA TRANSFER REQUEST code (03h)
*/
pDCB->SyncMode &= ~(SYNC_NEGO_DONE | EN_ATN_STOP);
trm_reg_write8((pDCB->IdentifyMsg & 0xBF),
TRMREG_SCSI_FIFO);
trm_reg_write8(MSG_EXTENDED,TRMREG_SCSI_FIFO);
/* (01h) */
trm_reg_write8(2,TRMREG_SCSI_FIFO);
/* Message length (02h) */
trm_reg_write8(3,TRMREG_SCSI_FIFO);
/* wide data xfer (03h) */
trm_reg_write8(1,TRMREG_SCSI_FIFO);
/* width:0(8bit),1(16bit),2(32bit) */
pSRB->SRBState |= SRB_DO_WIDE_NEGO;
} else if (!(pSRB->SRBState & SRB_DO_SYNC_NEGO)
&& (pDCB->SyncMode & SYNC_NEGO_ENABLE)) {
/*
* SYNCHRONOUS DATA TRANSFER REQUEST code (01h)
*/
if (!(pDCB->SyncMode & WIDE_NEGO_DONE))
trm_reg_write8((pDCB->IdentifyMsg & 0xBF),
TRMREG_SCSI_FIFO);
trm_reg_write8(MSG_EXTENDED,TRMREG_SCSI_FIFO);
/* (01h) */
trm_reg_write8(3,TRMREG_SCSI_FIFO);
/* Message length (03h) */
trm_reg_write8(1,TRMREG_SCSI_FIFO);
/* SYNCHRONOUS DATA TRANSFER REQUEST code (01h) */
trm_reg_write8(pDCB->MaxNegoPeriod,TRMREG_SCSI_FIFO);
/* Transfer peeriod factor */
trm_reg_write8((pACB->AdaptType == 1) ? 31 : 15,
TRMREG_SCSI_FIFO);
/* REQ/ACK offset */
pSRB->SRBState |= SRB_DO_SYNC_NEGO;
}
}
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_FIFO_OUT, TRMREG_SCSI_COMMAND);
}
static void
trm_CommandPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
}
static void
trm_CommandPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
PDCB pDCB;
u_int8_t * ptr;
u_int16_t i, cnt;
union ccb *pccb;
struct ccb_scsiio *pcsio;
pccb = pSRB->pccb;
pcsio = &pccb->csio;
trm_reg_write16(DO_CLRATN | DO_CLRFIFO , TRMREG_SCSI_CONTROL);
if (!(pSRB->SRBFlag & AUTO_REQSENSE)) {
cnt = (u_int16_t) pSRB->ScsiCmdLen;
ptr = (u_int8_t *) pSRB->CmdBlock;
for (i = 0; i < cnt; i++) {
trm_reg_write8(*ptr, TRMREG_SCSI_FIFO);
ptr++;
}
} else {
trm_reg_write8(REQUEST_SENSE, TRMREG_SCSI_FIFO);
pDCB = pACB->pActiveDCB;
/* target id */
trm_reg_write8((pDCB->IdentifyMsg << 5), TRMREG_SCSI_FIFO);
trm_reg_write8(0, TRMREG_SCSI_FIFO);
trm_reg_write8(0, TRMREG_SCSI_FIFO);
/* sizeof(struct scsi_sense_data) */
trm_reg_write8(pcsio->sense_len, TRMREG_SCSI_FIFO);
trm_reg_write8(0, TRMREG_SCSI_FIFO);
}
pSRB->SRBState = SRB_COMMAND;
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop*/
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_FIFO_OUT, TRMREG_SCSI_COMMAND);
}
static void
trm_DataOutPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
PDCB pDCB;
u_int8_t TempDMAstatus,SGIndexTemp;
u_int16_t scsi_status;
PSEG pseg;
u_long TempSRBXferredLength,dLeftCounter=0;
pDCB = pSRB->pSRBDCB;
scsi_status = *pscsi_status;
if (!(pSRB->SRBState & SRB_XFERPAD)) {
if (scsi_status & PARITYERROR)
pSRB->SRBStatus |= PARITY_ERROR;
if (!(scsi_status & SCSIXFERDONE)) {
/*
* when data transfer from DMA FIFO to SCSI FIFO
* if there was some data left in SCSI FIFO
*/
dLeftCounter = (u_long)
(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x3F);
if (pDCB->SyncPeriod & WIDE_SYNC) {
/*
* if WIDE scsi SCSI FIFOCNT unit is word
* so need to * 2
*/
dLeftCounter <<= 1;
}
}
/*
* caculate all the residue data that not yet tranfered
* SCSI transfer counter + left in SCSI FIFO data
*
* .....TRM_SCSI_COUNTER (24bits)
* The counter always decrement by one for every SCSI byte
*transfer.
* .....TRM_SCSI_FIFOCNT (5bits)
* The counter is SCSI FIFO offset counter
*/
dLeftCounter += trm_reg_read32(TRMREG_SCSI_COUNTER);
if (dLeftCounter == 1) {
dLeftCounter = 0;
trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL);
}
if ((dLeftCounter == 0) ||
(scsi_status & SCSIXFERCNT_2_ZERO)) {
TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS);
while (!(TempDMAstatus & DMAXFERCOMP)) {
TempDMAstatus =
trm_reg_read8(TRMREG_DMA_STATUS);
}
pSRB->SRBTotalXferLength = 0;
} else {
/* Update SG list */
/*
* if transfer not yet complete
* there were some data residue in SCSI FIFO or
* SCSI transfer counter not empty
*/
if (pSRB->SRBTotalXferLength != dLeftCounter) {
/*
* data that had transferred length
*/
TempSRBXferredLength =
pSRB->SRBTotalXferLength - dLeftCounter;
/*
* next time to be transferred length
*/
pSRB->SRBTotalXferLength = dLeftCounter;
/*
* parsing from last time disconnect SRBSGIndex
*/
pseg =
pSRB->pSRBSGL + pSRB->SRBSGIndex;
for (SGIndexTemp = pSRB->SRBSGIndex;
SGIndexTemp < pSRB->SRBSGCount;
SGIndexTemp++) {
/*
* find last time which SG transfer be
* disconnect
*/
if (TempSRBXferredLength >=
pseg->length)
TempSRBXferredLength -=
pseg->length;
else {
/*
* update last time disconnected SG
* list
*/
pseg->length -=
TempSRBXferredLength;
/* residue data length */
pseg->address +=
TempSRBXferredLength;
/* residue data pointer */
pSRB->SRBSGIndex = SGIndexTemp;
break;
}
pseg++;
}
}
}
}
trm_reg_write8(STOPDMAXFER ,TRMREG_DMA_CONTROL);
}
static void
trm_DataOutPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
u_int16_t ioDir;
/*
* do prepare befor transfer when data out phase
*/
ioDir = XFERDATAOUT;
trm_DataIO_transfer(pACB, pSRB, ioDir);
}
static void
trm_DataInPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
u_int8_t TempDMAstatus, SGIndexTemp;
u_int16_t scsi_status;
PSEG pseg;
u_long TempSRBXferredLength,dLeftCounter = 0;
scsi_status = *pscsi_status;
if (!(pSRB->SRBState & SRB_XFERPAD)) {
if (scsi_status & PARITYERROR)
pSRB->SRBStatus |= PARITY_ERROR;
dLeftCounter += trm_reg_read32(TRMREG_SCSI_COUNTER);
if ((dLeftCounter == 0) || (scsi_status & SCSIXFERCNT_2_ZERO)) {
TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS);
while (!(TempDMAstatus & DMAXFERCOMP))
TempDMAstatus = trm_reg_read8(TRMREG_DMA_STATUS);
pSRB->SRBTotalXferLength = 0;
} else {
/*
* parsing the case:
* when a transfer not yet complete
* but be disconnected by uper layer
* if transfer not yet complete
* there were some data residue in SCSI FIFO or
* SCSI transfer counter not empty
*/
if (pSRB->SRBTotalXferLength != dLeftCounter) {
/*
* data that had transferred length
*/
TempSRBXferredLength =
pSRB->SRBTotalXferLength - dLeftCounter;
/*
* next time to be transferred length
*/
pSRB->SRBTotalXferLength = dLeftCounter;
/*
* parsing from last time disconnect SRBSGIndex
*/
pseg = pSRB->pSRBSGL + pSRB->SRBSGIndex;
for (SGIndexTemp = pSRB->SRBSGIndex;
SGIndexTemp < pSRB->SRBSGCount;
SGIndexTemp++) {
/*
* find last time which SG transfer be disconnect
*/
if (TempSRBXferredLength >= pseg->length)
TempSRBXferredLength -= pseg->length;
else {
/*
* update last time disconnected SG list
*/
pseg->length -= TempSRBXferredLength;
/* residue data length */
pseg->address += TempSRBXferredLength;
/* residue data pointer */
pSRB->SRBSGIndex = SGIndexTemp;
break;
}
pseg++;
}
}
}
}
}
static void
trm_DataInPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
u_int16_t ioDir;
/*
* do prepare befor transfer when data in phase
*/
ioDir = XFERDATAIN;
trm_DataIO_transfer(pACB, pSRB, ioDir);
}
static void
trm_DataIO_transfer(PACB pACB, PSRB pSRB, u_int16_t ioDir)
{
u_int8_t bval;
PDCB pDCB;
pDCB = pSRB->pSRBDCB;
if (pSRB->SRBSGIndex < pSRB->SRBSGCount) {
if (pSRB->SRBTotalXferLength != 0) {
/*
* load what physical address of Scatter/Gather list
table want to be transfer
*/
TRM_DPRINTF(" SG->address=%8x \n",pSRB->pSRBSGL->address);
TRM_DPRINTF(" SG->length=%8x \n",pSRB->pSRBSGL->length);
TRM_DPRINTF(" pDCB->SyncPeriod=%x \n",pDCB->SyncPeriod);
TRM_DPRINTF(" pSRB->pSRBSGL=%8x \n",(unsigned int)pSRB->pSRBSGL);
TRM_DPRINTF(" pSRB->SRBSGPhyAddr=%8x \n",pSRB->SRBSGPhyAddr);
TRM_DPRINTF(" pSRB->SRBSGIndex=%d \n",pSRB->SRBSGIndex);
TRM_DPRINTF(" pSRB->SRBSGCount=%d \n",pSRB->SRBSGCount);
TRM_DPRINTF(" pSRB->SRBTotalXferLength=%d \n",pSRB->SRBTotalXferLength);
pSRB->SRBState = SRB_DATA_XFER;
trm_reg_write32(0, TRMREG_DMA_XHIGHADDR);
trm_reg_write32(
(pSRB->SRBSGPhyAddr +
((u_long)pSRB->SRBSGIndex << 3)),
TRMREG_DMA_XLOWADDR);
/*
* load how many bytes in the Scatter/Gather
* list table
*/
trm_reg_write32(
((u_long)(pSRB->SRBSGCount - pSRB->SRBSGIndex) << 3),
TRMREG_DMA_XCNT);
/*
* load total transfer length (24bits) max value
* 16Mbyte
*/
trm_reg_write32(pSRB->SRBTotalXferLength,
TRMREG_SCSI_COUNTER);
/* Start DMA transfer */
trm_reg_write16(ioDir, TRMREG_DMA_COMMAND);
/* Start SCSI transfer */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
bval = (ioDir == XFERDATAOUT) ?
SCMD_DMA_OUT : SCMD_DMA_IN;
trm_reg_write8(bval, TRMREG_SCSI_COMMAND);
} else {
/* xfer pad */
if (pSRB->SRBSGCount) {
pSRB->AdaptStatus = H_OVER_UNDER_RUN;
pSRB->SRBStatus |= OVER_RUN;
}
if (pDCB->SyncPeriod & WIDE_SYNC)
trm_reg_write32(2,TRMREG_SCSI_COUNTER);
else
trm_reg_write32(1,TRMREG_SCSI_COUNTER);
if (ioDir == XFERDATAOUT)
trm_reg_write16(0, TRMREG_SCSI_FIFO);
else
trm_reg_read16(TRMREG_SCSI_FIFO);
pSRB->SRBState |= SRB_XFERPAD;
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
bval = (ioDir == XFERDATAOUT) ?
SCMD_FIFO_OUT : SCMD_FIFO_IN;
trm_reg_write8(bval, TRMREG_SCSI_COMMAND);
}
}
}
static void
trm_StatusPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
pSRB->TargetStatus = trm_reg_read8(TRMREG_SCSI_FIFO);
pSRB->SRBState = SRB_COMPLETED;
*pscsi_status = PH_BUS_FREE;
/*.. initial phase*/
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
}
static void
trm_StatusPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
if (trm_reg_read16(TRMREG_DMA_COMMAND) & 0x0001) {
if (!(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x40))
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
if (!(trm_reg_read16(TRMREG_DMA_FIFOCNT) & 0x8000))
trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL);
} else {
if (!(trm_reg_read16(TRMREG_DMA_FIFOCNT) & 0x8000))
trm_reg_write8(CLRXFIFO, TRMREG_DMA_CONTROL);
if (!(trm_reg_read8(TRMREG_SCSI_FIFOCNT) & 0x40))
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
}
pSRB->SRBState = SRB_STATUS;
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_COMP, TRMREG_SCSI_COMMAND);
}
/*
*scsiiom
* trm_MsgInPhase0: one of trm_SCSI_phase0[] vectors
* stateV = (void *) trm_SCSI_phase0[phase]
* if phase =7
* extended message codes:
*
* code description
*
* 02h Reserved
* 00h MODIFY DATA POINTER
* 01h SYNCHRONOUS DATA TRANSFER REQUEST
* 03h WIDE DATA TRANSFER REQUEST
* 04h - 7Fh Reserved
* 80h - FFh Vendor specific
*
*/
static void
trm_MsgInPhase0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
u_int8_t message_in_code,bIndex,message_in_tag_id;
PDCB pDCB;
PSRB pSRBTemp;
pDCB = pACB->pActiveDCB;
message_in_code = trm_reg_read8(TRMREG_SCSI_FIFO);
if (!(pSRB->SRBState & SRB_EXTEND_MSGIN)) {
if (message_in_code == MSG_DISCONNECT) {
pSRB->SRBState = SRB_DISCONNECT;
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else if (message_in_code == MSG_SAVE_PTR) {
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else if ((message_in_code == MSG_EXTENDED) ||
((message_in_code >= MSG_SIMPLE_QTAG) &&
(message_in_code <= MSG_ORDER_QTAG))) {
pSRB->SRBState |= SRB_EXTEND_MSGIN;
pSRB->MsgInBuf[0] = message_in_code;
/* extended message (01h) */
pSRB->MsgCnt = 1;
pSRB->pMsgPtr = &pSRB->MsgInBuf[1];
/* extended message length (n) */
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else if (message_in_code == MSG_REJECT_) {
/* Reject message */
if (pDCB->SyncMode & WIDE_NEGO_ENABLE) {
/* do wide nego reject */
pDCB = pSRB->pSRBDCB;
pDCB->SyncMode |= WIDE_NEGO_DONE;
pDCB->SyncMode &= ~(SYNC_NEGO_DONE |
EN_ATN_STOP | WIDE_NEGO_ENABLE);
pSRB->SRBState &= ~(SRB_DO_WIDE_NEGO+SRB_MSGIN);
if ((pDCB->SyncMode & SYNC_NEGO_ENABLE)
&& !(pDCB->SyncMode & SYNC_NEGO_DONE)) {
/* Set ATN, in case ATN was clear */
pSRB->SRBState |= SRB_MSGOUT;
trm_reg_write16(
DO_SETATN,
TRMREG_SCSI_CONTROL);
} else {
/* Clear ATN */
trm_reg_write16(
DO_CLRATN,
TRMREG_SCSI_CONTROL);
}
} else if (pDCB->SyncMode & SYNC_NEGO_ENABLE) {
/* do sync nego reject */
trm_reg_write16(DO_CLRATN,TRMREG_SCSI_CONTROL);
if (pSRB->SRBState & SRB_DO_SYNC_NEGO) {
pDCB = pSRB->pSRBDCB;
pDCB->SyncMode &=
~(SYNC_NEGO_ENABLE+SYNC_NEGO_DONE);
pDCB->SyncPeriod = 0;
pDCB->SyncOffset = 0;
/*
*
* program SCSI control register
*
*/
trm_reg_write8(pDCB->SyncPeriod,
TRMREG_SCSI_SYNC);
trm_reg_write8(pDCB->SyncOffset,
TRMREG_SCSI_OFFSET);
trm_SetXferRate(pACB,pSRB,pDCB);
}
}
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else if (message_in_code == MSG_IGNOREWIDE) {
trm_reg_write32(1, TRMREG_SCSI_COUNTER);
trm_reg_read8(TRMREG_SCSI_FIFO);
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else {
/* Restore data pointer message */
/* Save data pointer message */
/* Completion message */
/* NOP message */
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
}
} else {
/*
* Parsing incomming extented messages
*/
*pSRB->pMsgPtr = message_in_code;
pSRB->MsgCnt++;
pSRB->pMsgPtr++;
TRM_DPRINTF("pSRB->MsgInBuf[0]=%2x \n ",pSRB->MsgInBuf[0]);
TRM_DPRINTF("pSRB->MsgInBuf[1]=%2x \n ",pSRB->MsgInBuf[1]);
TRM_DPRINTF("pSRB->MsgInBuf[2]=%2x \n ",pSRB->MsgInBuf[2]);
TRM_DPRINTF("pSRB->MsgInBuf[3]=%2x \n ",pSRB->MsgInBuf[3]);
TRM_DPRINTF("pSRB->MsgInBuf[4]=%2x \n ",pSRB->MsgInBuf[4]);
if ((pSRB->MsgInBuf[0] >= MSG_SIMPLE_QTAG)
&& (pSRB->MsgInBuf[0] <= MSG_ORDER_QTAG)) {
/*
* is QUEUE tag message :
*
* byte 0:
* HEAD QUEUE TAG (20h)
* ORDERED QUEUE TAG (21h)
* SIMPLE QUEUE TAG (22h)
* byte 1:
* Queue tag (00h - FFh)
*/
if (pSRB->MsgCnt == 2) {
pSRB->SRBState = 0;
message_in_tag_id = pSRB->MsgInBuf[1];
pSRB = pDCB->pGoingSRB;
pSRBTemp = pDCB->pGoingLastSRB;
if (pSRB) {
for (;;) {
if (pSRB->TagNumber !=
message_in_tag_id) {
if (pSRB == pSRBTemp) {
goto mingx0;
}
pSRB = pSRB->pNextSRB;
} else
break;
}
if (pDCB->DCBFlag & ABORT_DEV_) {
pSRB->SRBState = SRB_ABORT_SENT;
trm_EnableMsgOutAbort1(
pACB, pSRB);
}
if (!(pSRB->SRBState & SRB_DISCONNECT)) {
TRM_DPRINTF("SRB not yet disconnect........ \n ");
goto mingx0;
}
pDCB->pActiveSRB = pSRB;
pSRB->SRBState = SRB_DATA_XFER;
} else {
mingx0:
pSRB = &pACB->TmpSRB;
pSRB->SRBState = SRB_UNEXPECT_RESEL;
pDCB->pActiveSRB = pSRB;
pSRB->MsgOutBuf[0] = MSG_ABORT_TAG;
trm_EnableMsgOutAbort2(
pACB,
pSRB);
}
}
*pscsi_status = PH_BUS_FREE;
/* .. initial phase */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else if ((pSRB->MsgInBuf[0] == MSG_EXTENDED) &&
(pSRB->MsgInBuf[2] == 3) && (pSRB->MsgCnt == 4)) {
/*
* is Wide data xfer Extended message :
* ======================================
* WIDE DATA TRANSFER REQUEST
* ======================================
* byte 0 : Extended message (01h)
* byte 1 : Extended message length (02h)
* byte 2 : WIDE DATA TRANSFER code (03h)
* byte 3 : Transfer width exponent
*/
pDCB = pSRB->pSRBDCB;
pSRB->SRBState &= ~(SRB_EXTEND_MSGIN+SRB_DO_WIDE_NEGO);
if ((pSRB->MsgInBuf[1] != 2)) {
/* Length is wrong, reject it */
pDCB->SyncMode &=
~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE);
pSRB->MsgCnt = 1;
pSRB->MsgInBuf[0] = MSG_REJECT_;
trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL);
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
}
if (pDCB->SyncMode & WIDE_NEGO_ENABLE) {
/* Do wide negoniation */
if (pSRB->MsgInBuf[3] > 2) {
/* > 32 bit */
/* reject_msg: */
pDCB->SyncMode &=
~(WIDE_NEGO_ENABLE+WIDE_NEGO_DONE);
pSRB->MsgCnt = 1;
pSRB->MsgInBuf[0] = MSG_REJECT_;
trm_reg_write16(DO_SETATN,
TRMREG_SCSI_CONTROL);
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
}
if (pSRB->MsgInBuf[3] == 2) {
pSRB->MsgInBuf[3] = 1;
/* do 16 bits */
} else {
if (!(pDCB->SyncMode
& WIDE_NEGO_DONE)) {
pSRB->SRBState &=
~(SRB_DO_WIDE_NEGO+SRB_MSGIN);
pDCB->SyncMode |=
WIDE_NEGO_DONE;
pDCB->SyncMode &=
~(SYNC_NEGO_DONE |
EN_ATN_STOP |
WIDE_NEGO_ENABLE);
if (pSRB->MsgInBuf[3] != 0) {
/* is Wide data xfer */
pDCB->SyncPeriod |=
WIDE_SYNC;
pDCB->tinfo.current.width
= MSG_EXT_WDTR_BUS_16_BIT;
pDCB->tinfo.goal.width
= MSG_EXT_WDTR_BUS_16_BIT;
}
}
}
} else
pSRB->MsgInBuf[3] = 0;
pSRB->SRBState |= SRB_MSGOUT;
trm_reg_write16(DO_SETATN,TRMREG_SCSI_CONTROL);
*pscsi_status = PH_BUS_FREE; /* .. initial phase */
/* it's important for atn stop */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/*
* SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else if ((pSRB->MsgInBuf[0] == MSG_EXTENDED) &&
(pSRB->MsgInBuf[2] == 1) && (pSRB->MsgCnt == 5)) {
/*
* is 8bit transfer Extended message :
* =================================
* SYNCHRONOUS DATA TRANSFER REQUEST
* =================================
* byte 0 : Extended message (01h)
* byte 1 : Extended message length (03)
* byte 2 : SYNCHRONOUS DATA TRANSFER code (01h)
* byte 3 : Transfer period factor
* byte 4 : REQ/ACK offset
*/
pSRB->SRBState &= ~(SRB_EXTEND_MSGIN+SRB_DO_SYNC_NEGO);
if ((pSRB->MsgInBuf[1] != 3) ||
(pSRB->MsgInBuf[2] != 1)) {
/* reject_msg: */
pSRB->MsgCnt = 1;
pSRB->MsgInBuf[0] = MSG_REJECT_;
trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL);
*pscsi_status = PH_BUS_FREE;
/* .. initial phase */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else if (!(pSRB->MsgInBuf[3]) || !(pSRB->MsgInBuf[4])) {
/* set async */
pDCB = pSRB->pSRBDCB;
/* disable sync & sync nego */
pDCB->SyncMode &=
~(SYNC_NEGO_ENABLE+SYNC_NEGO_DONE);
pDCB->SyncPeriod = 0;
pDCB->SyncOffset = 0;
pDCB->tinfo.goal.period = 0;
pDCB->tinfo.goal.offset = 0;
pDCB->tinfo.current.period = 0;
pDCB->tinfo.current.offset = 0;
pDCB->tinfo.current.width =
MSG_EXT_WDTR_BUS_8_BIT;
/*
*
* program SCSI control register
*
*/
trm_reg_write8(pDCB->SyncPeriod,TRMREG_SCSI_SYNC);
trm_reg_write8(pDCB->SyncOffset,TRMREG_SCSI_OFFSET);
trm_SetXferRate(pACB,pSRB,pDCB);
*pscsi_status = PH_BUS_FREE;
/* .. initial phase */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
return;
} else {
/* set sync */
pDCB = pSRB->pSRBDCB;
pDCB->SyncMode |=
SYNC_NEGO_ENABLE+SYNC_NEGO_DONE;
pDCB->MaxNegoPeriod = pSRB->MsgInBuf[3];
/* Transfer period factor */
pDCB->SyncOffset = pSRB->MsgInBuf[4];
/* REQ/ACK offset */
if(pACB->AdaptType == 1) {
for(bIndex = 0; bIndex < 7; bIndex++) {
if(pSRB->MsgInBuf[3] <=
dc395u2x_clock_period[bIndex]) {
pDCB->tinfo.goal.period =
dc395u2x_tinfo_period[bIndex];
pDCB->tinfo.current.period =
dc395u2x_tinfo_period[bIndex];
pDCB->tinfo.goal.offset =
pDCB->SyncOffset;
pDCB->tinfo.current.offset =
pDCB->SyncOffset;
pDCB->SyncPeriod |= (bIndex|LVDS_SYNC);
break;
}
}
} else {
for(bIndex = 0; bIndex < 7; bIndex++) {
if(pSRB->MsgInBuf[3] <=
dc395x_clock_period[bIndex]) {
pDCB->tinfo.goal.period =
dc395x_tinfo_period[bIndex];
pDCB->tinfo.current.period =
dc395x_tinfo_period[bIndex];
pDCB->tinfo.goal.offset =
pDCB->SyncOffset;
pDCB->tinfo.current.offset =
pDCB->SyncOffset;
pDCB->SyncPeriod |=
(bIndex|ALT_SYNC);
break;
}
}
}
/*
*
* program SCSI control register
*
*/
trm_reg_write8(pDCB->SyncPeriod,
TRMREG_SCSI_SYNC);
trm_reg_write8(pDCB->SyncOffset,
TRMREG_SCSI_OFFSET);
trm_SetXferRate(pACB,pSRB,pDCB);
*pscsi_status=PH_BUS_FREE;/*.. initial phase*/
trm_reg_write16(DO_DATALATCH,TRMREG_SCSI_CONTROL);/* it's important for atn stop*/
/*
** SCSI command
*/
trm_reg_write8(SCMD_MSGACCEPT,TRMREG_SCSI_COMMAND);
return;
}
}
*pscsi_status = PH_BUS_FREE;
/* .. initial phase */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop */
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
}
}
static void
trm_MsgInPhase1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
trm_reg_write16(DO_CLRFIFO, TRMREG_SCSI_CONTROL);
trm_reg_write32(1,TRMREG_SCSI_COUNTER);
if (!(pSRB->SRBState & SRB_MSGIN)) {
pSRB->SRBState &= SRB_DISCONNECT;
pSRB->SRBState |= SRB_MSGIN;
}
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop*/
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_FIFO_IN, TRMREG_SCSI_COMMAND);
}
static void
trm_Nop0(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
}
static void
trm_Nop1(PACB pACB, PSRB pSRB, u_int16_t *pscsi_status)
{
}
static void
trm_SetXferRate(PACB pACB,PSRB pSRB, PDCB pDCB)
{
union ccb *pccb;
struct ccb_trans_settings neg;
u_int16_t cnt, i;
u_int8_t bval;
PDCB pDCBTemp;
/*
* set all lun device's period , offset
*/
TRM_DPRINTF("trm_SetXferRate\n");
pccb = pSRB->pccb;
neg.sync_period = pDCB->tinfo.goal.period;
neg.sync_offset = pDCB->tinfo.goal.offset;
neg.valid = CCB_TRANS_SYNC_RATE_VALID | CCB_TRANS_SYNC_OFFSET_VALID;
xpt_setup_ccb(&neg.ccb_h, pccb->ccb_h.path, /* priority */1);
xpt_async(AC_TRANSFER_NEG, pccb->ccb_h.path, &neg);
if (!(pDCB->IdentifyMsg & 0x07)) {
pDCBTemp = pACB->pLinkDCB;
cnt = pACB->DeviceCnt;
bval = pDCB->TargetID;
for (i = 0; i < cnt; i++) {
if (pDCBTemp->TargetID == bval) {
pDCBTemp->SyncPeriod = pDCB->SyncPeriod;
pDCBTemp->SyncOffset = pDCB->SyncOffset;
pDCBTemp->SyncMode = pDCB->SyncMode;
}
pDCBTemp = pDCBTemp->pNextDCB;
}
}
return;
}
/*
* scsiiom
* trm_Interrupt
*
*
* ---SCSI bus phase
*
* PH_DATA_OUT 0x00 Data out phase
* PH_DATA_IN 0x01 Data in phase
* PH_COMMAND 0x02 Command phase
* PH_STATUS 0x03 Status phase
* PH_BUS_FREE 0x04 Invalid phase used as bus free
* PH_BUS_FREE 0x05 Invalid phase used as bus free
* PH_MSG_OUT 0x06 Message out phase
* PH_MSG_IN 0x07 Message in phase
*
*/
static void
trm_Disconnect(PACB pACB)
{
PDCB pDCB;
PSRB pSRB, psrb;
u_int16_t i,j, cnt;
u_int target_id,target_lun;
TRM_DPRINTF("trm_Disconnect...............\n ");
pDCB = pACB->pActiveDCB;
if (!pDCB) {
TRM_DPRINTF(" Exception Disconnect DCB=NULL..............\n ");
j = 400;
while (--j)
DELAY(1);
/* 1 msec */
trm_reg_write16((DO_CLRFIFO | DO_HWRESELECT),
TRMREG_SCSI_CONTROL);
return;
}
pSRB = pDCB->pActiveSRB;
/* bug pSRB=0 */
target_id = pSRB->pccb->ccb_h.target_id;
target_lun = pSRB->pccb->ccb_h.target_lun;
TRM_DPRINTF(":pDCB->pActiveSRB= %8x \n ",(u_int) pDCB->pActiveSRB);
pACB->pActiveDCB = 0;
pSRB->ScsiPhase = PH_BUS_FREE;
/* SCSI bus free Phase */
trm_reg_write16((DO_CLRFIFO | DO_HWRESELECT), TRMREG_SCSI_CONTROL);
if (pSRB->SRBState & SRB_UNEXPECT_RESEL) {
pSRB->SRBState = 0;
trm_DoWaitingSRB(pACB);
} else if (pSRB->SRBState & SRB_ABORT_SENT) {
pDCB->DCBFlag = 0;
cnt = pDCB->GoingSRBCnt;
pDCB->GoingSRBCnt = 0;
pSRB = pDCB->pGoingSRB;
for (i = 0; i < cnt; i++) {
psrb = pSRB->pNextSRB;
pSRB->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB = pSRB;
pSRB = psrb;
}
pDCB->pGoingSRB = 0;
trm_DoWaitingSRB(pACB);
} else {
if ((pSRB->SRBState & (SRB_START_+SRB_MSGOUT)) ||
!(pSRB->SRBState & (SRB_DISCONNECT+SRB_COMPLETED))) {
/* Selection time out */
if (!(pACB->scan_devices[target_id][target_lun]) &&
pSRB->CmdBlock[0] != 0x00 && /* TEST UNIT READY */
pSRB->CmdBlock[0] != INQUIRY) {
pSRB->SRBState = SRB_READY;
trm_RewaitSRB(pDCB, pSRB);
} else {
pSRB->TargetStatus = SCSI_STAT_SEL_TIMEOUT;
goto disc1;
}
} else if (pSRB->SRBState & SRB_DISCONNECT) {
/*
* SRB_DISCONNECT
*/
trm_DoWaitingSRB(pACB);
} else if (pSRB->SRBState & SRB_COMPLETED) {
disc1:
/*
* SRB_COMPLETED
*/
pDCB->pActiveSRB = 0;
pSRB->SRBState = SRB_FREE;
trm_SRBdone(pACB, pDCB, pSRB);
}
}
return;
}
static void
trm_Reselect(PACB pACB)
{
PDCB pDCB;
PSRB pSRB;
u_int16_t RselTarLunId;
TRM_DPRINTF("trm_Reselect................. \n");
pDCB = pACB->pActiveDCB;
if (pDCB) {
/* Arbitration lost but Reselection win */
pSRB = pDCB->pActiveSRB;
pSRB->SRBState = SRB_READY;
trm_RewaitSRB(pDCB, pSRB);
}
/* Read Reselected Target Id and LUN */
RselTarLunId = trm_reg_read16(TRMREG_SCSI_TARGETID) & 0x1FFF;
pDCB = pACB->pLinkDCB;
while (RselTarLunId != *((u_int16_t *) &pDCB->TargetID)) {
/* get pDCB of the reselect id */
pDCB = pDCB->pNextDCB;
}
pACB->pActiveDCB = pDCB;
if (pDCB->SyncMode & EN_TAG_QUEUING) {
pSRB = &pACB->TmpSRB;
pDCB->pActiveSRB = pSRB;
} else {
pSRB = pDCB->pActiveSRB;
if (!pSRB || !(pSRB->SRBState & SRB_DISCONNECT)) {
/*
* abort command
*/
pSRB = &pACB->TmpSRB;
pSRB->SRBState = SRB_UNEXPECT_RESEL;
pDCB->pActiveSRB = pSRB;
trm_EnableMsgOutAbort1(pACB, pSRB);
} else {
if (pDCB->DCBFlag & ABORT_DEV_) {
pSRB->SRBState = SRB_ABORT_SENT;
trm_EnableMsgOutAbort1(pACB, pSRB);
} else
pSRB->SRBState = SRB_DATA_XFER;
}
}
pSRB->ScsiPhase = PH_BUS_FREE;
/* SCSI bus free Phase */
/*
* Program HA ID, target ID, period and offset
*/
trm_reg_write8((u_int8_t) RselTarLunId,TRMREG_SCSI_TARGETID);
/* target ID */
trm_reg_write8(pACB->AdaptSCSIID,TRMREG_SCSI_HOSTID);
/* host ID */
trm_reg_write8(pDCB->SyncPeriod,TRMREG_SCSI_SYNC);
/* period */
trm_reg_write8(pDCB->SyncOffset,TRMREG_SCSI_OFFSET);
/* offset */
trm_reg_write16(DO_DATALATCH, TRMREG_SCSI_CONTROL);
/* it's important for atn stop*/
/*
* SCSI cammand
*/
trm_reg_write8(SCMD_MSGACCEPT, TRMREG_SCSI_COMMAND);
/* to rls the /ACK signal */
}
static void
trm_SRBdone(PACB pACB, PDCB pDCB, PSRB pSRB)
{
PSRB psrb;
u_int8_t bval, bval1,status;
union ccb *pccb;
struct ccb_scsiio *pcsio;
PSCSI_INQDATA ptr;
int intflag;
u_int target_id,target_lun;
PDCB pTempDCB;
pccb = pSRB->pccb;
if (pccb == NULL)
return;
pcsio = &pccb->csio;
target_id = pSRB->pccb->ccb_h.target_id;
target_lun = pSRB->pccb->ccb_h.target_lun;
if ((pccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
bus_dmasync_op_t op;
if ((pccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_POSTREAD;
else
op = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(pACB->buffer_dmat, pSRB->dmamap, op);
bus_dmamap_unload(pACB->buffer_dmat, pSRB->dmamap);
}
/*
*
* target status
*
*/
status = pSRB->TargetStatus;
pcsio->scsi_status=SCSI_STAT_GOOD;
pccb->ccb_h.status = CAM_REQ_CMP;
if (pSRB->SRBFlag & AUTO_REQSENSE) {
/*
* status of auto request sense
*/
pSRB->SRBFlag &= ~AUTO_REQSENSE;
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = SCSI_STATUS_CHECK_COND;
if (status == SCSI_STATUS_CHECK_COND) {
pccb->ccb_h.status = CAM_SEL_TIMEOUT;
goto ckc_e;
}
*((u_long *) &(pSRB->CmdBlock[0])) = pSRB->Segment0[0];
*((u_long *) &(pSRB->CmdBlock[4])) = pSRB->Segment0[1];
pSRB->SRBTotalXferLength = pSRB->Segment1[1];
pSRB->pSRBSGL->address = pSRB->SgSenseTemp.address;
pSRB->pSRBSGL->length = pSRB->SgSenseTemp.length;
pcsio->scsi_status = SCSI_STATUS_CHECK_COND;
bzero(&pcsio->sense_data, pcsio->sense_len);
bcopy(trm_get_sense_buf(pACB, pSRB), &pcsio->sense_data,
pcsio->sense_len);
pcsio->ccb_h.status = CAM_SCSI_STATUS_ERROR
| CAM_AUTOSNS_VALID;
goto ckc_e;
}
/*
* target status
*/
if (status) {
if (status == SCSI_STATUS_CHECK_COND) {
if ((pcsio->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0) {
TRM_DPRINTF("trm_RequestSense..................\n");
trm_RequestSense(pACB, pDCB, pSRB);
return;
}
pcsio->scsi_status = SCSI_STATUS_CHECK_COND;
pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
goto ckc_e;
} else if (status == SCSI_STAT_QUEUEFULL) {
bval = (u_int8_t) pDCB->GoingSRBCnt;
bval--;
pDCB->MaxActiveCommandCnt = bval;
trm_RewaitSRB(pDCB, pSRB);
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = 0;
return;
} else if (status == SCSI_STAT_SEL_TIMEOUT) {
pSRB->AdaptStatus = H_SEL_TIMEOUT;
pSRB->TargetStatus = 0;
pcsio->scsi_status = SCSI_STAT_SEL_TIMEOUT;
pccb->ccb_h.status = CAM_SEL_TIMEOUT;
} else if (status == SCSI_STAT_BUSY) {
TRM_DPRINTF("trm: target busy at %s %d\n",
__FILE__, __LINE__);
pcsio->scsi_status = SCSI_STAT_BUSY;
pccb->ccb_h.status = CAM_SCSI_BUSY;
return;
/* The device busy, try again later? */
} else if (status == SCSI_STAT_RESCONFLICT) {
TRM_DPRINTF("trm: target reserved at %s %d\n",
__FILE__, __LINE__);
pcsio->scsi_status = SCSI_STAT_RESCONFLICT;
pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR; /*XXX*/
return;
} else {
pSRB->AdaptStatus = 0;
if (pSRB->RetryCnt) {
pSRB->RetryCnt--;
pSRB->TargetStatus = 0;
pSRB->SRBSGIndex = 0;
if (trm_StartSCSI(pACB, pDCB, pSRB)) {
/*
* If trm_StartSCSI return 1 :
* current interrupt status is interrupt
* disreenable
* It's said that SCSI processor has more
* one SRB need to do
*/
trm_RewaitSRB(pDCB, pSRB);
}
return;
} else {
TRM_DPRINTF("trm: driver stuffup at %s %d\n",
__FILE__, __LINE__);
pccb->ccb_h.status = CAM_SCSI_STATUS_ERROR;
}
}
} else {
/*
* process initiator status..........................
* Adapter (initiator) status
*/
status = pSRB->AdaptStatus;
if (status & H_OVER_UNDER_RUN) {
pSRB->TargetStatus = 0;
pccb->ccb_h.status = CAM_DATA_RUN_ERR;
/* Illegal length (over/under run) */
} else if (pSRB->SRBStatus & PARITY_ERROR) {
TRM_DPRINTF("trm: driver stuffup %s %d\n",
__FILE__, __LINE__);
pDCB->tinfo.goal.period = 0;
pDCB->tinfo.goal.offset = 0;
/* Driver failed to perform operation */
pccb->ccb_h.status = CAM_UNCOR_PARITY;
} else {
/* no error */
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = 0;
pccb->ccb_h.status = CAM_REQ_CMP;
/* there is no error, (sense is invalid) */
}
}
ckc_e:
if (pACB->scan_devices[target_id][target_lun]) {
/*
* if SCSI command in "scan devices" duty
*/
if (pSRB->CmdBlock[0] == TEST_UNIT_READY)
pACB->scan_devices[target_id][target_lun] = 0;
/* SCSI command phase :test unit ready */
else if (pSRB->CmdBlock[0] == INQUIRY) {
/*
* SCSI command phase :inquiry scsi device data
* (type,capacity,manufacture....
*/
if (pccb->ccb_h.status == CAM_SEL_TIMEOUT)
goto NO_DEV;
ptr = (PSCSI_INQDATA) pcsio->data_ptr;
/* page fault */
TRM_DPRINTF("trm_SRBdone..PSCSI_INQDATA:%2x \n",
ptr->DevType);
bval1 = ptr->DevType & SCSI_DEVTYPE;
if (bval1 == SCSI_NODEV) {
NO_DEV:
TRM_DPRINTF("trm_SRBdone NO Device:target_id= %d ,target_lun= %d \n",
target_id,
target_lun);
intflag = splcam();
pACB->scan_devices[target_id][target_lun] = 0;
/* no device set scan device flag =0*/
/* pDCB Q link */
/* move the head of DCB to tempDCB*/
pTempDCB=pACB->pLinkDCB;
/* search current DCB for pass link */
while (pTempDCB->pNextDCB != pDCB) {
pTempDCB = pTempDCB->pNextDCB;
}
/*
* when the current DCB found than connect
* current DCB tail
*/
/* to the DCB tail that before current DCB */
pTempDCB->pNextDCB = pDCB->pNextDCB;
/*
* if there was only one DCB ,connect his tail
* to his head
*/
if (pACB->pLinkDCB == pDCB)
pACB->pLinkDCB = pTempDCB->pNextDCB;
if (pACB->pDCBRunRobin == pDCB)
pACB->pDCBRunRobin = pTempDCB->pNextDCB;
pDCB->DCBstatus &= ~DS_IN_QUEUE;
pACB->DeviceCnt--;
if (pACB->DeviceCnt == 0) {
pACB->pLinkDCB = NULL;
pACB->pDCBRunRobin = NULL;
}
splx(intflag);
} else {
#ifdef trm_DEBUG1
int j;
for (j = 0; j < 28; j++) {
TRM_DPRINTF("ptr=%2x ",
((u_int8_t *)ptr)[j]);
}
#endif
pDCB->DevType = bval1;
if (bval1 == SCSI_DASD ||
bval1 == SCSI_OPTICAL) {
if ((((ptr->Vers & 0x07) >= 2) ||
((ptr->RDF & 0x0F) == 2)) &&
(ptr->Flags & SCSI_INQ_CMDQUEUE) &&
(pDCB->DevMode & TAG_QUEUING_) &&
(pDCB->DevMode & EN_DISCONNECT_)) {
if (pDCB->DevMode &
TAG_QUEUING_) {
pDCB->
MaxActiveCommandCnt =
pACB->TagMaxNum;
pDCB->SyncMode |=
EN_TAG_QUEUING;
pDCB->tinfo.disc_tag |=
TRM_CUR_TAGENB;
} else {
pDCB->SyncMode |=
EN_ATN_STOP;
pDCB->tinfo.disc_tag &=
~TRM_CUR_TAGENB;
}
}
}
}
/* pSRB->CmdBlock[0] == INQUIRY */
}
/* pACB->scan_devices[target_id][target_lun] */
}
intflag = splcam();
/* ReleaseSRB(pDCB, pSRB); */
if (pSRB == pDCB->pGoingSRB)
pDCB->pGoingSRB = pSRB->pNextSRB;
else {
psrb = pDCB->pGoingSRB;
while (psrb->pNextSRB != pSRB) {
psrb = psrb->pNextSRB;
}
psrb->pNextSRB = pSRB->pNextSRB;
if (pSRB == pDCB->pGoingLastSRB) {
pDCB->pGoingLastSRB = psrb;
}
}
pSRB->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB = pSRB;
pDCB->GoingSRBCnt--;
trm_DoWaitingSRB(pACB);
splx(intflag);
/* Notify cmd done */
xpt_done (pccb);
}
static void
trm_DoingSRB_Done(PACB pACB)
{
PDCB pDCB, pdcb;
PSRB psrb, psrb2;
u_int16_t cnt, i;
union ccb *pccb;
pDCB = pACB->pLinkDCB;
if (pDCB == NULL)
return;
pdcb = pDCB;
do {
cnt = pdcb->GoingSRBCnt;
psrb = pdcb->pGoingSRB;
for (i = 0; i < cnt; i++) {
psrb2 = psrb->pNextSRB;
pccb = psrb->pccb;
pccb->ccb_h.status = CAM_SEL_TIMEOUT;
/* ReleaseSRB(pDCB, pSRB); */
psrb->pNextSRB = pACB->pFreeSRB;
pACB->pFreeSRB = psrb;
xpt_done(pccb);
psrb = psrb2;
}
pdcb->GoingSRBCnt = 0;;
pdcb->pGoingSRB = NULL;
pdcb = pdcb->pNextDCB;
}
while (pdcb != pDCB);
}
static void
trm_ResetSCSIBus(PACB pACB)
{
int intflag;
intflag = splcam();
pACB->ACBFlag |= RESET_DEV;
trm_reg_write16(DO_RSTSCSI,TRMREG_SCSI_CONTROL);
while (!(trm_reg_read16(TRMREG_SCSI_INTSTATUS) & INT_SCSIRESET));
splx(intflag);
return;
}
static void
trm_ScsiRstDetect(PACB pACB)
{
int intflag;
u_long wlval;
TRM_DPRINTF("trm_ScsiRstDetect \n");
wlval = 1000;
while (--wlval)
DELAY(1000);
intflag = splcam();
trm_reg_write8(STOPDMAXFER,TRMREG_DMA_CONTROL);
trm_reg_write16(DO_CLRFIFO,TRMREG_SCSI_CONTROL);
if (pACB->ACBFlag & RESET_DEV)
pACB->ACBFlag |= RESET_DONE;
else {
pACB->ACBFlag |= RESET_DETECT;
trm_ResetDevParam(pACB);
/* trm_DoingSRB_Done(pACB); ???? */
trm_RecoverSRB(pACB);
pACB->pActiveDCB = NULL;
pACB->ACBFlag = 0;
trm_DoWaitingSRB(pACB);
}
splx(intflag);
return;
}
static void
trm_RequestSense(PACB pACB, PDCB pDCB, PSRB pSRB)
{
union ccb *pccb;
struct ccb_scsiio *pcsio;
pccb = pSRB->pccb;
pcsio = &pccb->csio;
pSRB->SRBFlag |= AUTO_REQSENSE;
pSRB->Segment0[0] = *((u_long *) &(pSRB->CmdBlock[0]));
pSRB->Segment0[1] = *((u_long *) &(pSRB->CmdBlock[4]));
pSRB->Segment1[0] = (u_long) ((pSRB->ScsiCmdLen << 8) +
pSRB->SRBSGCount);
pSRB->Segment1[1] = pSRB->SRBTotalXferLength; /* ?????????? */
/* $$$$$$ Status of initiator/target $$$$$$$$ */
pSRB->AdaptStatus = 0;
pSRB->TargetStatus = 0;
/* $$$$$$ Status of initiator/target $$$$$$$$ */
pSRB->SRBTotalXferLength = sizeof(pcsio->sense_data);
pSRB->SgSenseTemp.address = pSRB->pSRBSGL->address;
pSRB->SgSenseTemp.length = pSRB->pSRBSGL->length;
pSRB->pSRBSGL->address = trm_get_sense_bufaddr(pACB, pSRB);
pSRB->pSRBSGL->length = (u_long) sizeof(struct scsi_sense_data);
pSRB->SRBSGCount = 1;
pSRB->SRBSGIndex = 0;
*((u_long *) &(pSRB->CmdBlock[0])) = 0x00000003;
pSRB->CmdBlock[1] = pDCB->IdentifyMsg << 5;
*((u_int16_t *) &(pSRB->CmdBlock[4])) = pcsio->sense_len;
pSRB->ScsiCmdLen = 6;
if (trm_StartSCSI(pACB, pDCB, pSRB))
/*
* If trm_StartSCSI return 1 :
* current interrupt status is interrupt disreenable
* It's said that SCSI processor has more one SRB need to do
*/
trm_RewaitSRB(pDCB, pSRB);
}
static void
trm_EnableMsgOutAbort2(PACB pACB, PSRB pSRB)
{
pSRB->MsgCnt = 1;
trm_reg_write16(DO_SETATN, TRMREG_SCSI_CONTROL);
}
static void
trm_EnableMsgOutAbort1(PACB pACB, PSRB pSRB)
{
pSRB->MsgOutBuf[0] = MSG_ABORT;
trm_EnableMsgOutAbort2(pACB, pSRB);
}
static void
trm_initDCB(PACB pACB, PDCB pDCB, u_int16_t unit,u_int32_t i,u_int32_t j)
{
PNVRAMTYPE pEEpromBuf;
u_int8_t bval,PeriodIndex;
u_int target_id,target_lun;
PDCB pTempDCB;
int intflag;
target_id = i;
target_lun = j;
/*
* Using the lun 0 device to init other DCB first, if the device
* has been initialized.
* I don't want init sync arguments one by one, it is the same.
*/
if (target_lun != 0 &&
(pACB->DCBarray[target_id][0].DCBstatus & DS_IN_QUEUE))
bcopy(&pACB->DCBarray[target_id][0], pDCB,
sizeof(TRM_DCB));
intflag = splcam();
if (pACB->pLinkDCB == 0) {
pACB->pLinkDCB = pDCB;
/*
* RunRobin impersonate the role
* that let each device had good proportion
* about SCSI command proceeding
*/
pACB->pDCBRunRobin = pDCB;
pDCB->pNextDCB = pDCB;
} else {
pTempDCB=pACB->pLinkDCB;
/* search the last nod of DCB link */
while (pTempDCB->pNextDCB != pACB->pLinkDCB)
pTempDCB = pTempDCB->pNextDCB;
/* connect current DCB with last DCB tail */
pTempDCB->pNextDCB = pDCB;
/* connect current DCB tail to this DCB Q head */
pDCB->pNextDCB=pACB->pLinkDCB;
}
splx(intflag);
pACB->DeviceCnt++;
pDCB->TargetID = target_id;
pDCB->TargetLUN = target_lun;
pDCB->pWaitingSRB = NULL;
pDCB->pGoingSRB = NULL;
pDCB->GoingSRBCnt = 0;
pDCB->pActiveSRB = NULL;
pDCB->MaxActiveCommandCnt = 1;
pDCB->DCBFlag = 0;
pDCB->DCBstatus |= DS_IN_QUEUE;
/* $$$$$$$ */
pEEpromBuf = &trm_eepromBuf[unit];
pDCB->DevMode = pEEpromBuf->NvramTarget[target_id].NvmTarCfg0;
pDCB->AdpMode = pEEpromBuf->NvramChannelCfg;
/* $$$$$$$ */
/*
* disconnect enable ?
*/
if (pDCB->DevMode & NTC_DO_DISCONNECT) {
bval = 0xC0;
pDCB->tinfo.disc_tag |= TRM_USR_DISCENB ;
} else {
bval = 0x80;
pDCB->tinfo.disc_tag &= ~(TRM_USR_DISCENB);
}
bval |= target_lun;
pDCB->IdentifyMsg = bval;
if (target_lun != 0 &&
(pACB->DCBarray[target_id][0].DCBstatus & DS_IN_QUEUE))
return;
/* $$$$$$$ */
/*
* tag Qing enable ?
*/
if (pDCB->DevMode & TAG_QUEUING_) {
pDCB->tinfo.disc_tag |= TRM_USR_TAGENB ;
} else
pDCB->tinfo.disc_tag &= ~(TRM_USR_TAGENB);
/* $$$$$$$ */
/*
* wide nego ,sync nego enable ?
*/
pDCB->SyncPeriod = 0;
pDCB->SyncOffset = 0;
PeriodIndex = pEEpromBuf->NvramTarget[target_id].NvmTarPeriod & 0x07;
if(pACB->AdaptType==1) {/* is U2? */
pDCB->MaxNegoPeriod=dc395u2x_clock_period[ PeriodIndex ];
pDCB->tinfo.user.period=pDCB->MaxNegoPeriod;
pDCB->tinfo.user.offset=(pDCB->SyncMode & SYNC_NEGO_ENABLE) ? 31 : 0;
} else {
pDCB->MaxNegoPeriod=dc395x_clock_period[ PeriodIndex ];
pDCB->tinfo.user.period=pDCB->MaxNegoPeriod;
pDCB->tinfo.user.offset=(pDCB->SyncMode & SYNC_NEGO_ENABLE) ? 15 : 0;
}
pDCB->SyncMode = 0;
if ((pDCB->DevMode & NTC_DO_WIDE_NEGO) &&
(pACB->Config & HCC_WIDE_CARD))
pDCB->SyncMode |= WIDE_NEGO_ENABLE;
/* enable wide nego */
if (pDCB->DevMode & NTC_DO_SYNC_NEGO)
pDCB->SyncMode |= SYNC_NEGO_ENABLE;
/* enable sync nego */
/* $$$$$$$ */
/*
* Fill in tinfo structure.
*/
pDCB->tinfo.user.width = (pDCB->SyncMode & WIDE_NEGO_ENABLE) ?
MSG_EXT_WDTR_BUS_16_BIT : MSG_EXT_WDTR_BUS_8_BIT;
pDCB->tinfo.current.period = 0;
pDCB->tinfo.current.offset = 0;
pDCB->tinfo.current.width = MSG_EXT_WDTR_BUS_8_BIT;
}
static void
trm_srbmapSG(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
PSRB pSRB;
pSRB=(PSRB) arg;
pSRB->SRBSGPhyAddr=segs->ds_addr;
return;
}
static int
trm_initSRB(PACB pACB)
{
u_int16_t i;
PSRB pSRB;
for(i = 0; i < TRM_MAX_SRB_CNT; i++) {
pSRB = (PSRB)&pACB->pFreeSRB[i];
/* DMA tag for our S/G structures */
if(bus_dma_tag_create(
/*parent_dmat*/pSRB->parent_dmat,
/*alignment*/ 1,
/*boundary*/ 0,
/*lowaddr*/ BUS_SPACE_MAXADDR,
/*highaddr*/ BUS_SPACE_MAXADDR,
/*filter*/ NULL,
/*filterarg*/ NULL,
/*maxsize*/ TRM_MAX_SG_LISTENTRY * sizeof(SGentry),
/*nsegments*/ 1,
/*maxsegsz*/ TRM_MAXTRANSFER_SIZE,
/*flags*/ 0,
/*dmat*/ &pSRB->sg_dmat) != 0) {
return ENXIO;
}
if(bus_dmamem_alloc(pSRB->sg_dmat, (void **)&pSRB->pSRBSGL,
BUS_DMA_NOWAIT, &pSRB->sg_dmamap) !=0 ) {
return ENXIO;
}
bus_dmamap_load(pSRB->sg_dmat, pSRB->sg_dmamap, pSRB->pSRBSGL,
TRM_MAX_SG_LISTENTRY * sizeof(SGentry),
trm_srbmapSG, pSRB, /*flags*/0);
if(i != TRM_MAX_SRB_CNT - 1) {
/*
** link all SRB
*/
pSRB->pNextSRB = &pACB->pFreeSRB[i+1];
} else {
/*
** load NULL to NextSRB of the last SRB
*/
pSRB->pNextSRB = NULL;
}
pSRB->TagNumber = i;
}
return (0);
}
static void
trm_initACB(PACB pACB, u_int8_t adaptType, u_int16_t unit)
{
PNVRAMTYPE pEEpromBuf;
pEEpromBuf = &trm_eepromBuf[unit];
pACB->max_id = 15;
if (pEEpromBuf->NvramChannelCfg & NAC_SCANLUN)
pACB->max_lun = 7;
else
pACB->max_lun = 0;
TRM_DPRINTF("trm: pACB->max_id= %d pACB->max_lun= %d \n",
pACB->max_id, pACB->max_lun);
pACB->pLinkDCB = NULL;
pACB->pDCBRunRobin = NULL;
pACB->pActiveDCB = NULL;
pACB->AdapterUnit = (u_int8_t)unit;
pACB->AdaptSCSIID = pEEpromBuf->NvramScsiId;
pACB->AdaptSCSILUN = 0;
pACB->DeviceCnt = 0;
pACB->AdaptType = adaptType;
pACB->TagMaxNum = 2 << pEEpromBuf->NvramMaxTag;
pACB->ACBFlag = 0;
return;
}
static void
NVRAM_trm_write_all(PNVRAMTYPE pEEpromBuf,PACB pACB)
{
u_int8_t *bpEeprom = (u_int8_t *) pEEpromBuf;
u_int8_t bAddr;
/* Enable SEEPROM */
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) | EN_EEPROM),
TRMREG_GEN_CONTROL);
/*
* Write enable
*/
NVRAM_trm_write_cmd(pACB, 0x04, 0xFF);
trm_reg_write8(0, TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
for (bAddr = 0; bAddr < 128; bAddr++, bpEeprom++) {
NVRAM_trm_set_data(pACB, bAddr, *bpEeprom);
}
/*
* Write disable
*/
NVRAM_trm_write_cmd(pACB, 0x04, 0x00);
trm_reg_write8(0 , TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
/* Disable SEEPROM */
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) & ~EN_EEPROM),
TRMREG_GEN_CONTROL);
return;
}
static void
NVRAM_trm_set_data(PACB pACB, u_int8_t bAddr, u_int8_t bData)
{
int i;
u_int8_t bSendData;
/*
* Send write command & address
*/
NVRAM_trm_write_cmd(pACB, 0x05, bAddr);
/*
* Write data
*/
for (i = 0; i < 8; i++, bData <<= 1) {
bSendData = NVR_SELECT;
if (bData & 0x80)
/* Start from bit 7 */
bSendData |= NVR_BITOUT;
trm_reg_write8(bSendData , TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
}
trm_reg_write8(NVR_SELECT , TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
/*
* Disable chip select
*/
trm_reg_write8(0 , TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
trm_reg_write8(NVR_SELECT ,TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
/*
* Wait for write ready
*/
while (1) {
trm_reg_write8((NVR_SELECT | NVR_CLOCK), TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
trm_reg_write8(NVR_SELECT, TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
if (trm_reg_read8(TRMREG_GEN_NVRAM) & NVR_BITIN) {
break;
}
}
/*
* Disable chip select
*/
trm_reg_write8(0, TRMREG_GEN_NVRAM);
return;
}
static void
NVRAM_trm_read_all(PNVRAMTYPE pEEpromBuf, PACB pACB)
{
u_int8_t *bpEeprom = (u_int8_t*) pEEpromBuf;
u_int8_t bAddr;
/*
* Enable SEEPROM
*/
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) | EN_EEPROM),
TRMREG_GEN_CONTROL);
for (bAddr = 0; bAddr < 128; bAddr++, bpEeprom++)
*bpEeprom = NVRAM_trm_get_data(pACB, bAddr);
/*
* Disable SEEPROM
*/
trm_reg_write8((trm_reg_read8(TRMREG_GEN_CONTROL) & ~EN_EEPROM),
TRMREG_GEN_CONTROL);
return;
}
static u_int8_t
NVRAM_trm_get_data(PACB pACB, u_int8_t bAddr)
{
int i;
u_int8_t bReadData, bData = 0;
/*
* Send read command & address
*/
NVRAM_trm_write_cmd(pACB, 0x06, bAddr);
for (i = 0; i < 8; i++) {
/*
* Read data
*/
trm_reg_write8((NVR_SELECT | NVR_CLOCK) , TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
trm_reg_write8(NVR_SELECT , TRMREG_GEN_NVRAM);
/*
* Get data bit while falling edge
*/
bReadData = trm_reg_read8(TRMREG_GEN_NVRAM);
bData <<= 1;
if (bReadData & NVR_BITIN) {
bData |= 1;
}
NVRAM_trm_wait_30us(pACB);
}
/*
* Disable chip select
*/
trm_reg_write8(0, TRMREG_GEN_NVRAM);
return (bData);
}
static void
NVRAM_trm_wait_30us(PACB pACB)
{
/* ScsiPortStallExecution(30); wait 30 us */
trm_reg_write8(5, TRMREG_GEN_TIMER);
while (!(trm_reg_read8(TRMREG_GEN_STATUS) & GTIMEOUT));
return;
}
static void
NVRAM_trm_write_cmd(PACB pACB, u_int8_t bCmd, u_int8_t bAddr)
{
int i;
u_int8_t bSendData;
for (i = 0; i < 3; i++, bCmd <<= 1) {
/*
* Program SB+OP code
*/
bSendData = NVR_SELECT;
if (bCmd & 0x04)
bSendData |= NVR_BITOUT;
/* start from bit 2 */
trm_reg_write8(bSendData, TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
}
for (i = 0; i < 7; i++, bAddr <<= 1) {
/*
* Program address
*/
bSendData = NVR_SELECT;
if (bAddr & 0x40)
/* Start from bit 6 */
bSendData |= NVR_BITOUT;
trm_reg_write8(bSendData , TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
trm_reg_write8((bSendData | NVR_CLOCK), TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
}
trm_reg_write8(NVR_SELECT, TRMREG_GEN_NVRAM);
NVRAM_trm_wait_30us(pACB);
}
static void
trm_check_eeprom(PNVRAMTYPE pEEpromBuf, PACB pACB)
{
u_int16_t *wpEeprom = (u_int16_t *) pEEpromBuf;
u_int16_t wAddr, wCheckSum;
u_long dAddr, *dpEeprom;
NVRAM_trm_read_all(pEEpromBuf,pACB);
wCheckSum = 0;
for (wAddr = 0, wpEeprom = (u_int16_t *) pEEpromBuf;
wAddr < 64; wAddr++, wpEeprom++) {
wCheckSum += *wpEeprom;
}
if (wCheckSum != 0x1234) {
/*
* Checksum error, load default
*/
pEEpromBuf->NvramSubVendorID[0] = (u_int8_t) PCI_Vendor_ID_TEKRAM;
pEEpromBuf->NvramSubVendorID[1] =
(u_int8_t) (PCI_Vendor_ID_TEKRAM >> 8);
pEEpromBuf->NvramSubSysID[0] = (u_int8_t) PCI_Device_ID_TRM_S1040;
pEEpromBuf->NvramSubSysID[1] =
(u_int8_t) (PCI_Device_ID_TRM_S1040 >> 8);
pEEpromBuf->NvramSubClass = 0x00;
pEEpromBuf->NvramVendorID[0] = (u_int8_t) PCI_Vendor_ID_TEKRAM;
pEEpromBuf->NvramVendorID[1] =
(u_int8_t) (PCI_Vendor_ID_TEKRAM >> 8);
pEEpromBuf->NvramDeviceID[0] = (u_int8_t) PCI_Device_ID_TRM_S1040;
pEEpromBuf->NvramDeviceID[1] =
(u_int8_t) (PCI_Device_ID_TRM_S1040 >> 8);
pEEpromBuf->NvramReserved = 0x00;
for (dAddr = 0, dpEeprom = (u_long *) pEEpromBuf->NvramTarget;
dAddr < 16; dAddr++, dpEeprom++) {
*dpEeprom = 0x00000077;
/* NvmTarCfg3,NvmTarCfg2,NvmTarPeriod,NvmTarCfg0 */
}
*dpEeprom++ = 0x04000F07;
/* NvramMaxTag,NvramDelayTime,NvramChannelCfg,NvramScsiId */
*dpEeprom++ = 0x00000015;
/* NvramReserved1,NvramBootLun,NvramBootTarget,NvramReserved0 */
for (dAddr = 0; dAddr < 12; dAddr++, dpEeprom++)
*dpEeprom = 0x00;
pEEpromBuf->NvramCheckSum = 0x00;
for (wAddr = 0, wCheckSum = 0, wpEeprom = (u_int16_t *) pEEpromBuf;
wAddr < 63; wAddr++, wpEeprom++)
wCheckSum += *wpEeprom;
*wpEeprom = 0x1234 - wCheckSum;
NVRAM_trm_write_all(pEEpromBuf,pACB);
}
return;
}
static int
trm_initAdapter(PACB pACB, u_int16_t unit)
{
PNVRAMTYPE pEEpromBuf;
u_int16_t wval;
u_int8_t bval;
pEEpromBuf = &trm_eepromBuf[unit];
/* 250ms selection timeout */
trm_reg_write8(SEL_TIMEOUT, TRMREG_SCSI_TIMEOUT);
/* Mask all the interrupt */
trm_reg_write8(0x00, TRMREG_DMA_INTEN);
trm_reg_write8(0x00, TRMREG_SCSI_INTEN);
/* Reset SCSI module */
trm_reg_write16(DO_RSTMODULE, TRMREG_SCSI_CONTROL);
/* program configuration 0 */
pACB->Config = HCC_AUTOTERM | HCC_PARITY;
if (trm_reg_read8(TRMREG_GEN_STATUS) & WIDESCSI)
pACB->Config |= HCC_WIDE_CARD;
if (pEEpromBuf->NvramChannelCfg & NAC_POWERON_SCSI_RESET)
pACB->Config |= HCC_SCSI_RESET;
if (pACB->Config & HCC_PARITY)
bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK;
else
bval = PHASELATCH | INITIATOR | BLOCKRST ;
trm_reg_write8(bval,TRMREG_SCSI_CONFIG0);
/* program configuration 1 */
trm_reg_write8(0x13, TRMREG_SCSI_CONFIG1);
/* program Host ID */
bval = pEEpromBuf->NvramScsiId;
trm_reg_write8(bval, TRMREG_SCSI_HOSTID);
/* set ansynchronous transfer */
trm_reg_write8(0x00, TRMREG_SCSI_OFFSET);
/* Trun LED control off*/
wval = trm_reg_read16(TRMREG_GEN_CONTROL) & 0x7F;
trm_reg_write16(wval, TRMREG_GEN_CONTROL);
/* DMA config */
wval = trm_reg_read16(TRMREG_DMA_CONFIG) | DMA_ENHANCE;
trm_reg_write16(wval, TRMREG_DMA_CONFIG);
/* Clear pending interrupt status */
trm_reg_read8(TRMREG_SCSI_INTSTATUS);
/* Enable SCSI interrupt */
trm_reg_write8(0x7F, TRMREG_SCSI_INTEN);
trm_reg_write8(EN_SCSIINTR, TRMREG_DMA_INTEN);
return (0);
}
static void
trm_mapSRB(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
PACB pACB;
pACB = (PACB)arg;
pACB->srb_physbase = segs->ds_addr;
}
static void
trm_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
bus_addr_t *baddr;
baddr = (bus_addr_t *)arg;
*baddr = segs->ds_addr;
}
static PACB
trm_init(u_int16_t unit, device_t dev)
{
PACB pACB;
int rid = PCIR_MAPS, i = 0, j = 0;
u_int16_t adaptType = 0;
pACB = (PACB) device_get_softc(dev);
if (!pACB) {
printf("trm%d: cannot allocate ACB !\n", unit);
return (NULL);
}
bzero (pACB, sizeof (struct _ACB));
pACB->iores = bus_alloc_resource(dev, SYS_RES_IOPORT,
&rid, 0, ~0, 1, RF_ACTIVE);
if (pACB->iores == NULL) {
printf("trm_init: bus_alloc_resource failed!\n");
return (NULL);
}
switch (pci_get_devid(dev)) {
case PCI_DEVICEID_TRMS1040:
adaptType = 0;
break;
case PCI_DEVICEID_TRMS2080:
adaptType = 1;
break;
default:
printf("trm_init %d: unknown adapter type!\n", unit);
goto bad;
}
pACB->dev = dev;
pACB->tag = rman_get_bustag(pACB->iores);
pACB->bsh = rman_get_bushandle(pACB->iores);
if (bus_dma_tag_create(/*parent_dmat*/ pACB->parent_dmat,
/*alignment*/ 1,
/*boundary*/ 0,
/*lowaddr*/ BUS_SPACE_MAXADDR,
/*highaddr*/ BUS_SPACE_MAXADDR,
/*filter*/ NULL,
/*filterarg*/ NULL,
/*maxsize*/ MAXBSIZE,
/*nsegments*/ TRM_NSEG,
/*maxsegsz*/ TRM_MAXTRANSFER_SIZE,
/*flags*/ BUS_DMA_ALLOCNOW,
&pACB->buffer_dmat) != 0)
goto bad;
/* DMA tag for our ccb structures */
if(bus_dma_tag_create(
/*parent_dmat*/pACB->parent_dmat,
/*alignment*/ 1,
/*boundary*/ 0,
/*lowaddr*/ BUS_SPACE_MAXADDR,
/*highaddr*/ BUS_SPACE_MAXADDR,
/*filter*/ NULL,
/*filterarg*/ NULL,
/*maxsize*/ TRM_MAX_SRB_CNT * sizeof(TRM_SRB),
/*nsegments*/ 1,
/*maxsegsz*/ TRM_MAXTRANSFER_SIZE,
/*flags*/ 0,
/*dmat*/ &pACB->srb_dmat) != 0) {
printf("trm_init %d: bus_dma_tag_create SRB failure\n", unit);
goto bad;
}
if (bus_dmamem_alloc(pACB->srb_dmat, (void **)&pACB->pFreeSRB,
BUS_DMA_NOWAIT, &pACB->srb_dmamap) != 0) {
printf("trm_init %d: bus_dmamem_alloc SRB failure\n", unit);
goto bad;
}
bus_dmamap_load(pACB->srb_dmat, pACB->srb_dmamap, pACB->pFreeSRB,
TRM_MAX_SRB_CNT * sizeof(TRM_SRB), trm_mapSRB, pACB,
/* flags */0);
/* Create, allocate, and map DMA buffers for autosense data */
if (bus_dma_tag_create(/*parent_dmat*/NULL, /*alignment*/1,
/*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
sizeof(struct scsi_sense_data) * TRM_MAX_SRB_CNT,
/*nsegments*/1,
/*maxsegsz*/TRM_MAXTRANSFER_SIZE,
/*flags*/0, &pACB->sense_dmat) != 0) {
if (bootverbose)
device_printf(dev, "cannot create sense buffer dmat\n");
goto bad;
}
if (bus_dmamem_alloc(pACB->sense_dmat, (void **)&pACB->sense_buffers,
BUS_DMA_NOWAIT, &pACB->sense_dmamap) != 0)
goto bad;
bus_dmamap_load(pACB->sense_dmat, pACB->sense_dmamap,
pACB->sense_buffers,
sizeof(struct scsi_sense_data) * TRM_MAX_SRB_CNT,
trm_dmamap_cb, &pACB->sense_busaddr, /*flags*/0);
trm_check_eeprom(&trm_eepromBuf[unit],pACB);
trm_initACB(pACB, adaptType, unit);
for (i = 0; i < (pACB->max_id + 1); i++) {
if (pACB->AdaptSCSIID == i)
continue;
for(j = 0; j < (pACB->max_lun + 1); j++) {
pACB->scan_devices[i][j] = 1;
/* we assume we need to scan all devices */
trm_initDCB(pACB, &pACB->DCBarray[i][j], unit, i, j);
}
}
bzero(pACB->pFreeSRB, TRM_MAX_SRB_CNT * sizeof(TRM_SRB));
if (trm_initSRB(pACB)) {
printf("trm_initSRB: error\n");
goto bad;
}
if (trm_initAdapter(pACB, unit)) {
printf("trm_initAdapter: initial ERROR\n");
goto bad;
}
return (pACB);
bad:
if (pACB->iores)
bus_release_resource(dev, SYS_RES_IOPORT, PCIR_MAPS,
pACB->iores);
if (pACB->sense_dmamap) {
bus_dmamap_unload(pACB->sense_dmat, pACB->sense_dmamap);
bus_dmamem_free(pACB->sense_dmat, pACB->sense_buffers,
pACB->sense_dmamap);
bus_dmamap_destroy(pACB->sense_dmat, pACB->sense_dmamap);
}
if (pACB->sense_dmat)
bus_dma_tag_destroy(pACB->sense_dmat);
if (pACB->srb_dmamap) {
bus_dmamap_unload(pACB->srb_dmat, pACB->srb_dmamap);
bus_dmamem_free(pACB->srb_dmat, pACB->pFreeSRB,
pACB->srb_dmamap);
bus_dmamap_destroy(pACB->srb_dmat, pACB->srb_dmamap);
}
if (pACB->srb_dmat)
bus_dma_tag_destroy(pACB->srb_dmat);
if (pACB->buffer_dmat)
bus_dma_tag_destroy(pACB->buffer_dmat);
return (NULL);
}
static int
trm_attach(device_t dev)
{
struct cam_devq *device_Q;
u_long device_id;
PACB pACB = 0;
int rid = 0;
int unit = device_get_unit(dev);
device_id = pci_get_devid(dev);
/*
* These cards do not allow memory mapped accesses
*/
if ((pACB = trm_init((u_int16_t) unit,
dev)) == NULL) {
printf("trm%d: trm_init error!\n",unit);
return (ENXIO);
}
/* After setting up the adapter, map our interrupt */
/*
* Now let the CAM generic SCSI layer find the SCSI devices on the bus
* start queue to reset to the idle loop.
* Create device queue of SIM(s)
* (MAX_START_JOB - 1) : max_sim_transactions
*/
pACB->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0,
~0, 1, RF_SHAREABLE | RF_ACTIVE);
if (pACB->irq == NULL ||
bus_setup_intr(dev, pACB->irq,
INTR_TYPE_CAM, trm_Interrupt, pACB, &pACB->ih)) {
printf("trm%d: register Interrupt handler error!\n", unit);
goto bad;
}
device_Q = cam_simq_alloc(TRM_MAX_START_JOB);
if (device_Q == NULL){
printf("trm%d: device_Q == NULL !\n",unit);
goto bad;
}
/*
* Now tell the generic SCSI layer
* about our bus.
* If this is the xpt layer creating a sim, then it's OK
* to wait for an allocation.
* XXX Should we pass in a flag to indicate that wait is OK?
*
* SIM allocation
*
* SCSI Interface Modules
* The sim driver creates a sim for each controller. The sim device
* queue is separately created in order to allow resource sharing betwee
* sims. For instance, a driver may create one sim for each channel of
* a multi-channel controller and use the same queue for each channel.
* In this way, the queue resources are shared across all the channels
* of the multi-channel controller.
* trm_action : sim_action_func
* trm_poll : sim_poll_func
* "trm" : sim_name ,if sim_name = "xpt" ..M_DEVBUF,M_WAITOK
* pACB : *softc if sim_name <> "xpt" ..M_DEVBUF,M_NOWAIT
* pACB->unit : unit
* 1 : max_dev_transactions
* MAX_TAGS : max_tagged_dev_transactions
*
* *******Construct our first channel SIM entry
*/
pACB->psim = cam_sim_alloc(trm_action,
trm_poll,
"trm",
pACB,
unit,
1,
TRM_MAX_TAGS_CMD_QUEUE,
device_Q);
if (pACB->psim == NULL) {
printf("trm%d: SIM allocate fault !\n",unit);
cam_simq_free(device_Q); /* SIM allocate fault*/
goto bad;
}
if (xpt_bus_register(pACB->psim, 0) != CAM_SUCCESS) {
printf("trm%d: xpt_bus_register fault !\n",unit);
goto bad;
}
if (xpt_create_path(&pACB->ppath,
NULL,
cam_sim_path(pACB->psim),
CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
printf("trm%d: xpt_create_path fault !\n",unit);
xpt_bus_deregister(cam_sim_path(pACB->psim));
goto bad;
}
return (0);
bad:
if (pACB->iores)
bus_release_resource(dev, SYS_RES_IOPORT, PCIR_MAPS,
pACB->iores);
if (pACB->srb_dmamap) {
bus_dmamap_unload(pACB->srb_dmat, pACB->srb_dmamap);
bus_dmamem_free(pACB->srb_dmat, pACB->pFreeSRB,
pACB->srb_dmamap);
bus_dmamap_destroy(pACB->srb_dmat, pACB->srb_dmamap);
}
if (pACB->srb_dmat)
bus_dma_tag_destroy(pACB->srb_dmat);
if (pACB->sense_dmamap) {
bus_dmamap_unload(pACB->sense_dmat, pACB->sense_dmamap);
bus_dmamem_free(pACB->sense_dmat, pACB->sense_buffers,
pACB->sense_dmamap);
bus_dmamap_destroy(pACB->sense_dmat, pACB->sense_dmamap);
}
if (pACB->sense_dmat)
bus_dma_tag_destroy(pACB->sense_dmat);
if (pACB->buffer_dmat)
bus_dma_tag_destroy(pACB->buffer_dmat);
if (pACB->ih)
bus_teardown_intr(dev, pACB->irq, pACB->ih);
if (pACB->irq)
bus_release_resource(dev, SYS_RES_IRQ, 0, pACB->irq);
if (pACB->psim)
cam_sim_free(pACB->psim, TRUE);
return (ENXIO);
}
/*
* pci_device
* trm_probe (device_t tag, pcidi_t type)
*
*/
static int
trm_probe(device_t dev)
{
switch (pci_get_devid(dev)) {
case PCI_DEVICEID_TRMS1040:
device_set_desc(dev,
"Tekram DC395U/UW/F DC315/U Fast20 Wide SCSI Adapter");
return (0);
case PCI_DEVICEID_TRMS2080:
device_set_desc(dev,
"Tekram DC395U2D/U2W Fast40 Wide SCSI Adapter");
return 0;
default:
return (ENXIO);
}
}
static int
trm_detach(device_t dev)
{
PACB pACB = device_get_softc(dev);
bus_release_resource(dev, SYS_RES_IOPORT, PCIR_MAPS, pACB->iores);
bus_dmamap_unload(pACB->srb_dmat, pACB->srb_dmamap);
bus_dmamem_free(pACB->srb_dmat, pACB->pFreeSRB,
pACB->srb_dmamap);
bus_dmamap_destroy(pACB->srb_dmat, pACB->srb_dmamap);
bus_dma_tag_destroy(pACB->srb_dmat);
bus_dmamap_unload(pACB->sense_dmat, pACB->sense_dmamap);
bus_dmamem_free(pACB->sense_dmat, pACB->sense_buffers,
pACB->sense_dmamap);
bus_dmamap_destroy(pACB->sense_dmat, pACB->sense_dmamap);
bus_dma_tag_destroy(pACB->sense_dmat);
bus_dma_tag_destroy(pACB->buffer_dmat);
bus_teardown_intr(dev, pACB->irq, pACB->ih);
bus_release_resource(dev, SYS_RES_IRQ, 0, pACB->irq);
xpt_async(AC_LOST_DEVICE, pACB->ppath, NULL);
xpt_free_path(pACB->ppath);
xpt_bus_deregister(cam_sim_path(pACB->psim));
cam_sim_free(pACB->psim, TRUE);
return (0);
}
static device_method_t trm_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, trm_probe),
DEVMETHOD(device_attach, trm_attach),
DEVMETHOD(device_detach, trm_detach),
{ 0, 0 }
};
static driver_t trm_driver = {
"trm", trm_methods, sizeof(struct _ACB)
};
static devclass_t trm_devclass;
DRIVER_MODULE(trm, pci, trm_driver, trm_devclass, 0, 0);
Reference in New Issue View Git Blame Copy Permalink