d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
97933a41fb
freebsd-nq/sys/dev/mps/mps_user.c
Kenneth D. Merry 6d4ffcb4ac Changes to make mps(4) and mpr(4) handle reinit with reallocation. 
When the mps(4) and mpr(4) drivers need to reinitialize the
firmware, they sometimes need to reallocate all of the memory
allocated by the driver.  The reallocation happens whenever the IOC
Facts change.  That should only happen after a firmware upgrade.

If the reinitialization happens as a result of a timed out command
sent to the card, the command that timed out and triggered the
reinit may have been freed if iocfacts_allocate() reallocated all
memory.  If the caller attempts to access the command after that,
the kernel will panic because the caller will be dereferencing
freed memory.

The solution is to set a flag in the softc when we reallocate,
and avoid dereferencing the command strucure if we've reallocated.

The changes are largely the same in both drivers, since mpr(4) is a
derivative of mps(4).

 o In iocfacts_allocate(), if the IOC Facts have changed and we
   need to reallocate, set the REALLOCATED flag in the softc.

 o Change wait_command() to take a struct mps_command ** instead of
   a struct mps_command *.  This allows us to NULL out the caller's
   command pointer if we have to reinit the controller and the data
   structures get reallocated.  (The REALLOCATED flag will be set
   in the softc if that has happened.)

 o In every place that calls wait_command(), make sure we handle
   the case where the command is NULL after the call.

 o The mpr(4) driver has mpr_request_polled() which can also
   reinitialize the card.  Also check for reallocation there.

Reviewed by:	scottl, slm
MFC after:	1 week
Sponsored by:	Spectra Logic
2017-08-10 14:59:17 +00:00

2425 lines
66 KiB
C
Raw Blame History

/*-
* Copyright (c) 2008 Yahoo!, Inc.
* All rights reserved.
* Written by: John Baldwin <jhb@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD userland interface
*/
/*-
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_compat.h"
/* TODO Move headers to mpsvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/selinfo.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/sysctl.h>
#include <sys/ioccom.h>
#include <sys/endian.h>
#include <sys/queue.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/proc.h>
#include <sys/sysent.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/scsi/scsi_all.h>
#include <dev/mps/mpi/mpi2_type.h>
#include <dev/mps/mpi/mpi2.h>
#include <dev/mps/mpi/mpi2_ioc.h>
#include <dev/mps/mpi/mpi2_cnfg.h>
#include <dev/mps/mpi/mpi2_init.h>
#include <dev/mps/mpi/mpi2_tool.h>
#include <dev/mps/mps_ioctl.h>
#include <dev/mps/mpsvar.h>
#include <dev/mps/mps_table.h>
#include <dev/mps/mps_sas.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
static d_open_t mps_open;
static d_close_t mps_close;
static d_ioctl_t mps_ioctl_devsw;
static struct cdevsw mps_cdevsw = {
.d_version = D_VERSION,
.d_flags = 0,
.d_open = mps_open,
.d_close = mps_close,
.d_ioctl = mps_ioctl_devsw,
.d_name = "mps",
};
typedef int (mps_user_f)(struct mps_command *, struct mps_usr_command *);
static mps_user_f mpi_pre_ioc_facts;
static mps_user_f mpi_pre_port_facts;
static mps_user_f mpi_pre_fw_download;
static mps_user_f mpi_pre_fw_upload;
static mps_user_f mpi_pre_sata_passthrough;
static mps_user_f mpi_pre_smp_passthrough;
static mps_user_f mpi_pre_config;
static mps_user_f mpi_pre_sas_io_unit_control;
static int mps_user_read_cfg_header(struct mps_softc *,
struct mps_cfg_page_req *);
static int mps_user_read_cfg_page(struct mps_softc *,
struct mps_cfg_page_req *, void *);
static int mps_user_read_extcfg_header(struct mps_softc *,
struct mps_ext_cfg_page_req *);
static int mps_user_read_extcfg_page(struct mps_softc *,
struct mps_ext_cfg_page_req *, void *);
static int mps_user_write_cfg_page(struct mps_softc *,
struct mps_cfg_page_req *, void *);
static int mps_user_setup_request(struct mps_command *,
struct mps_usr_command *);
static int mps_user_command(struct mps_softc *, struct mps_usr_command *);
static int mps_user_pass_thru(struct mps_softc *sc, mps_pass_thru_t *data);
static void mps_user_get_adapter_data(struct mps_softc *sc,
mps_adapter_data_t *data);
static void mps_user_read_pci_info(struct mps_softc *sc,
mps_pci_info_t *data);
static uint8_t mps_get_fw_diag_buffer_number(struct mps_softc *sc,
uint32_t unique_id);
static int mps_post_fw_diag_buffer(struct mps_softc *sc,
mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code);
static int mps_release_fw_diag_buffer(struct mps_softc *sc,
mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code,
uint32_t diag_type);
static int mps_diag_register(struct mps_softc *sc,
mps_fw_diag_register_t *diag_register, uint32_t *return_code);
static int mps_diag_unregister(struct mps_softc *sc,
mps_fw_diag_unregister_t *diag_unregister, uint32_t *return_code);
static int mps_diag_query(struct mps_softc *sc, mps_fw_diag_query_t *diag_query,
uint32_t *return_code);
static int mps_diag_read_buffer(struct mps_softc *sc,
mps_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf,
uint32_t *return_code);
static int mps_diag_release(struct mps_softc *sc,
mps_fw_diag_release_t *diag_release, uint32_t *return_code);
static int mps_do_diag_action(struct mps_softc *sc, uint32_t action,
uint8_t *diag_action, uint32_t length, uint32_t *return_code);
static int mps_user_diag_action(struct mps_softc *sc, mps_diag_action_t *data);
static void mps_user_event_query(struct mps_softc *sc, mps_event_query_t *data);
static void mps_user_event_enable(struct mps_softc *sc,
mps_event_enable_t *data);
static int mps_user_event_report(struct mps_softc *sc,
mps_event_report_t *data);
static int mps_user_reg_access(struct mps_softc *sc, mps_reg_access_t *data);
static int mps_user_btdh(struct mps_softc *sc, mps_btdh_mapping_t *data);
static MALLOC_DEFINE(M_MPSUSER, "mps_user", "Buffers for mps(4) ioctls");
/* Macros from compat/freebsd32/freebsd32.h */
#define PTRIN(v) (void *)(uintptr_t)(v)
#define PTROUT(v) (uint32_t)(uintptr_t)(v)
#define CP(src,dst,fld) do { (dst).fld = (src).fld; } while (0)
#define PTRIN_CP(src,dst,fld) \
do { (dst).fld = PTRIN((src).fld); } while (0)
#define PTROUT_CP(src,dst,fld) \
do { (dst).fld = PTROUT((src).fld); } while (0)
int
mps_attach_user(struct mps_softc *sc)
{
int unit;
unit = device_get_unit(sc->mps_dev);
sc->mps_cdev = make_dev(&mps_cdevsw, unit, UID_ROOT, GID_OPERATOR, 0640,
"mps%d", unit);
if (sc->mps_cdev == NULL) {
return (ENOMEM);
}
sc->mps_cdev->si_drv1 = sc;
return (0);
}
void
mps_detach_user(struct mps_softc *sc)
{
/* XXX: do a purge of pending requests? */
if (sc->mps_cdev != NULL)
destroy_dev(sc->mps_cdev);
}
static int
mps_open(struct cdev *dev, int flags, int fmt, struct thread *td)
{
return (0);
}
static int
mps_close(struct cdev *dev, int flags, int fmt, struct thread *td)
{
return (0);
}
static int
mps_user_read_cfg_header(struct mps_softc *sc,
struct mps_cfg_page_req *page_req)
{
MPI2_CONFIG_PAGE_HEADER *hdr;
struct mps_config_params params;
int error;
hdr = &params.hdr.Struct;
params.action = MPI2_CONFIG_ACTION_PAGE_HEADER;
params.page_address = le32toh(page_req->page_address);
hdr->PageVersion = 0;
hdr->PageLength = 0;
hdr->PageNumber = page_req->header.PageNumber;
hdr->PageType = page_req->header.PageType;
params.buffer = NULL;
params.length = 0;
params.callback = NULL;
if ((error = mps_read_config_page(sc, &params)) != 0) {
/*
* Leave the request. Without resetting the chip, it's
* still owned by it and we'll just get into trouble
* freeing it now. Mark it as abandoned so that if it
* shows up later it can be freed.
*/
mps_printf(sc, "read_cfg_header timed out\n");
return (ETIMEDOUT);
}
page_req->ioc_status = htole16(params.status);
if ((page_req->ioc_status & MPI2_IOCSTATUS_MASK) ==
MPI2_IOCSTATUS_SUCCESS) {
bcopy(hdr, &page_req->header, sizeof(page_req->header));
}
return (0);
}
static int
mps_user_read_cfg_page(struct mps_softc *sc, struct mps_cfg_page_req *page_req,
void *buf)
{
MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr;
struct mps_config_params params;
int error;
reqhdr = buf;
hdr = &params.hdr.Struct;
hdr->PageVersion = reqhdr->PageVersion;
hdr->PageLength = reqhdr->PageLength;
hdr->PageNumber = reqhdr->PageNumber;
hdr->PageType = reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK;
params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
params.page_address = le32toh(page_req->page_address);
params.buffer = buf;
params.length = le32toh(page_req->len);
params.callback = NULL;
if ((error = mps_read_config_page(sc, &params)) != 0) {
mps_printf(sc, "mps_user_read_cfg_page timed out\n");
return (ETIMEDOUT);
}
page_req->ioc_status = htole16(params.status);
return (0);
}
static int
mps_user_read_extcfg_header(struct mps_softc *sc,
struct mps_ext_cfg_page_req *ext_page_req)
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr;
struct mps_config_params params;
int error;
hdr = &params.hdr.Ext;
params.action = MPI2_CONFIG_ACTION_PAGE_HEADER;
hdr->PageVersion = ext_page_req->header.PageVersion;
hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
hdr->ExtPageLength = 0;
hdr->PageNumber = ext_page_req->header.PageNumber;
hdr->ExtPageType = ext_page_req->header.ExtPageType;
params.page_address = le32toh(ext_page_req->page_address);
params.buffer = NULL;
params.length = 0;
params.callback = NULL;
if ((error = mps_read_config_page(sc, &params)) != 0) {
/*
* Leave the request. Without resetting the chip, it's
* still owned by it and we'll just get into trouble
* freeing it now. Mark it as abandoned so that if it
* shows up later it can be freed.
*/
mps_printf(sc, "mps_user_read_extcfg_header timed out\n");
return (ETIMEDOUT);
}
ext_page_req->ioc_status = htole16(params.status);
if ((ext_page_req->ioc_status & MPI2_IOCSTATUS_MASK) ==
MPI2_IOCSTATUS_SUCCESS) {
ext_page_req->header.PageVersion = hdr->PageVersion;
ext_page_req->header.PageNumber = hdr->PageNumber;
ext_page_req->header.PageType = hdr->PageType;
ext_page_req->header.ExtPageLength = hdr->ExtPageLength;
ext_page_req->header.ExtPageType = hdr->ExtPageType;
}
return (0);
}
static int
mps_user_read_extcfg_page(struct mps_softc *sc,
struct mps_ext_cfg_page_req *ext_page_req, void *buf)
{
MPI2_CONFIG_EXTENDED_PAGE_HEADER *reqhdr, *hdr;
struct mps_config_params params;
int error;
reqhdr = buf;
hdr = &params.hdr.Ext;
params.action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
params.page_address = le32toh(ext_page_req->page_address);
hdr->PageVersion = reqhdr->PageVersion;
hdr->PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
hdr->PageNumber = reqhdr->PageNumber;
hdr->ExtPageType = reqhdr->ExtPageType;
hdr->ExtPageLength = reqhdr->ExtPageLength;
params.buffer = buf;
params.length = le32toh(ext_page_req->len);
params.callback = NULL;
if ((error = mps_read_config_page(sc, &params)) != 0) {
mps_printf(sc, "mps_user_read_extcfg_page timed out\n");
return (ETIMEDOUT);
}
ext_page_req->ioc_status = htole16(params.status);
return (0);
}
static int
mps_user_write_cfg_page(struct mps_softc *sc,
struct mps_cfg_page_req *page_req, void *buf)
{
MPI2_CONFIG_PAGE_HEADER *reqhdr, *hdr;
struct mps_config_params params;
u_int hdr_attr;
int error;
reqhdr = buf;
hdr = &params.hdr.Struct;
hdr_attr = reqhdr->PageType & MPI2_CONFIG_PAGEATTR_MASK;
if (hdr_attr != MPI2_CONFIG_PAGEATTR_CHANGEABLE &&
hdr_attr != MPI2_CONFIG_PAGEATTR_PERSISTENT) {
mps_printf(sc, "page type 0x%x not changeable\n",
reqhdr->PageType & MPI2_CONFIG_PAGETYPE_MASK);
return (EINVAL);
}
/*
* There isn't any point in restoring stripped out attributes
* if you then mask them going down to issue the request.
*/
hdr->PageVersion = reqhdr->PageVersion;
hdr->PageLength = reqhdr->PageLength;
hdr->PageNumber = reqhdr->PageNumber;
hdr->PageType = reqhdr->PageType;
params.action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
params.page_address = le32toh(page_req->page_address);
params.buffer = buf;
params.length = le32toh(page_req->len);
params.callback = NULL;
if ((error = mps_write_config_page(sc, &params)) != 0) {
mps_printf(sc, "mps_write_cfg_page timed out\n");
return (ETIMEDOUT);
}
page_req->ioc_status = htole16(params.status);
return (0);
}
void
mpi_init_sge(struct mps_command *cm, void *req, void *sge)
{
int off, space;
space = (int)cm->cm_sc->facts->IOCRequestFrameSize * 4;
off = (uintptr_t)sge - (uintptr_t)req;
KASSERT(off < space, ("bad pointers %p %p, off %d, space %d",
req, sge, off, space));
cm->cm_sge = sge;
cm->cm_sglsize = space - off;
}
/*
* Prepare the mps_command for an IOC_FACTS request.
*/
static int
mpi_pre_ioc_facts(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_IOC_FACTS_REQUEST *req = (void *)cm->cm_req;
MPI2_IOC_FACTS_REPLY *rpl;
if (cmd->req_len != sizeof *req)
return (EINVAL);
if (cmd->rpl_len != sizeof *rpl)
return (EINVAL);
cm->cm_sge = NULL;
cm->cm_sglsize = 0;
return (0);
}
/*
* Prepare the mps_command for a PORT_FACTS request.
*/
static int
mpi_pre_port_facts(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_PORT_FACTS_REQUEST *req = (void *)cm->cm_req;
MPI2_PORT_FACTS_REPLY *rpl;
if (cmd->req_len != sizeof *req)
return (EINVAL);
if (cmd->rpl_len != sizeof *rpl)
return (EINVAL);
cm->cm_sge = NULL;
cm->cm_sglsize = 0;
return (0);
}
/*
* Prepare the mps_command for a FW_DOWNLOAD request.
*/
static int
mpi_pre_fw_download(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_FW_DOWNLOAD_REQUEST *req = (void *)cm->cm_req;
MPI2_FW_DOWNLOAD_REPLY *rpl;
MPI2_FW_DOWNLOAD_TCSGE tc;
int error;
/*
* This code assumes there is room in the request's SGL for
* the TransactionContext plus at least a SGL chain element.
*/
CTASSERT(sizeof req->SGL >= sizeof tc + MPS_SGC_SIZE);
if (cmd->req_len != sizeof *req)
return (EINVAL);
if (cmd->rpl_len != sizeof *rpl)
return (EINVAL);
if (cmd->len == 0)
return (EINVAL);
error = copyin(cmd->buf, cm->cm_data, cmd->len);
if (error != 0)
return (error);
mpi_init_sge(cm, req, &req->SGL);
bzero(&tc, sizeof tc);
/*
* For now, the F/W image must be provided in a single request.
*/
if ((req->MsgFlags & MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT) == 0)
return (EINVAL);
if (req->TotalImageSize != cmd->len)
return (EINVAL);
/*
* The value of the first two elements is specified in the
* Fusion-MPT Message Passing Interface document.
*/
tc.ContextSize = 0;
tc.DetailsLength = 12;
tc.ImageOffset = 0;
tc.ImageSize = cmd->len;
cm->cm_flags |= MPS_CM_FLAGS_DATAOUT;
return (mps_push_sge(cm, &tc, sizeof tc, 0));
}
/*
* Prepare the mps_command for a FW_UPLOAD request.
*/
static int
mpi_pre_fw_upload(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_FW_UPLOAD_REQUEST *req = (void *)cm->cm_req;
MPI2_FW_UPLOAD_REPLY *rpl;
MPI2_FW_UPLOAD_TCSGE tc;
/*
* This code assumes there is room in the request's SGL for
* the TransactionContext plus at least a SGL chain element.
*/
CTASSERT(sizeof req->SGL >= sizeof tc + MPS_SGC_SIZE);
if (cmd->req_len != sizeof *req)
return (EINVAL);
if (cmd->rpl_len != sizeof *rpl)
return (EINVAL);
mpi_init_sge(cm, req, &req->SGL);
bzero(&tc, sizeof tc);
/*
* The value of the first two elements is specified in the
* Fusion-MPT Message Passing Interface document.
*/
tc.ContextSize = 0;
tc.DetailsLength = 12;
/*
* XXX Is there any reason to fetch a partial image? I.e. to
* set ImageOffset to something other than 0?
*/
tc.ImageOffset = 0;
tc.ImageSize = cmd->len;
cm->cm_flags |= MPS_CM_FLAGS_DATAIN;
return (mps_push_sge(cm, &tc, sizeof tc, 0));
}
/*
* Prepare the mps_command for a SATA_PASSTHROUGH request.
*/
static int
mpi_pre_sata_passthrough(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_SATA_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req;
MPI2_SATA_PASSTHROUGH_REPLY *rpl;
if (cmd->req_len != sizeof *req)
return (EINVAL);
if (cmd->rpl_len != sizeof *rpl)
return (EINVAL);
mpi_init_sge(cm, req, &req->SGL);
return (0);
}
/*
* Prepare the mps_command for a SMP_PASSTHROUGH request.
*/
static int
mpi_pre_smp_passthrough(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_SMP_PASSTHROUGH_REQUEST *req = (void *)cm->cm_req;
MPI2_SMP_PASSTHROUGH_REPLY *rpl;
if (cmd->req_len != sizeof *req)
return (EINVAL);
if (cmd->rpl_len != sizeof *rpl)
return (EINVAL);
mpi_init_sge(cm, req, &req->SGL);
return (0);
}
/*
* Prepare the mps_command for a CONFIG request.
*/
static int
mpi_pre_config(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_CONFIG_REQUEST *req = (void *)cm->cm_req;
MPI2_CONFIG_REPLY *rpl;
if (cmd->req_len != sizeof *req)
return (EINVAL);
if (cmd->rpl_len != sizeof *rpl)
return (EINVAL);
mpi_init_sge(cm, req, &req->PageBufferSGE);
return (0);
}
/*
* Prepare the mps_command for a SAS_IO_UNIT_CONTROL request.
*/
static int
mpi_pre_sas_io_unit_control(struct mps_command *cm,
struct mps_usr_command *cmd)
{
cm->cm_sge = NULL;
cm->cm_sglsize = 0;
return (0);
}
/*
* A set of functions to prepare an mps_command for the various
* supported requests.
*/
struct mps_user_func {
U8 Function;
mps_user_f *f_pre;
} mps_user_func_list[] = {
{ MPI2_FUNCTION_IOC_FACTS, mpi_pre_ioc_facts },
{ MPI2_FUNCTION_PORT_FACTS, mpi_pre_port_facts },
{ MPI2_FUNCTION_FW_DOWNLOAD, mpi_pre_fw_download },
{ MPI2_FUNCTION_FW_UPLOAD, mpi_pre_fw_upload },
{ MPI2_FUNCTION_SATA_PASSTHROUGH, mpi_pre_sata_passthrough },
{ MPI2_FUNCTION_SMP_PASSTHROUGH, mpi_pre_smp_passthrough},
{ MPI2_FUNCTION_CONFIG, mpi_pre_config},
{ MPI2_FUNCTION_SAS_IO_UNIT_CONTROL, mpi_pre_sas_io_unit_control },
{ 0xFF, NULL } /* list end */
};
static int
mps_user_setup_request(struct mps_command *cm, struct mps_usr_command *cmd)
{
MPI2_REQUEST_HEADER *hdr = (MPI2_REQUEST_HEADER *)cm->cm_req;
struct mps_user_func *f;
for (f = mps_user_func_list; f->f_pre != NULL; f++) {
if (hdr->Function == f->Function)
return (f->f_pre(cm, cmd));
}
return (EINVAL);
}
static int
mps_user_command(struct mps_softc *sc, struct mps_usr_command *cmd)
{
MPI2_REQUEST_HEADER *hdr;
MPI2_DEFAULT_REPLY *rpl;
void *buf = NULL;
struct mps_command *cm = NULL;
int err = 0;
int sz;
mps_lock(sc);
cm = mps_alloc_command(sc);
if (cm == NULL) {
mps_printf(sc, "%s: no mps requests\n", __func__);
err = ENOMEM;
goto RetFree;
}
mps_unlock(sc);
hdr = (MPI2_REQUEST_HEADER *)cm->cm_req;
mps_dprint(sc, MPS_USER, "%s: req %p %d rpl %p %d\n", __func__,
cmd->req, cmd->req_len, cmd->rpl, cmd->rpl_len);
if (cmd->req_len > (int)sc->facts->IOCRequestFrameSize * 4) {
err = EINVAL;
goto RetFreeUnlocked;
}
err = copyin(cmd->req, hdr, cmd->req_len);
if (err != 0)
goto RetFreeUnlocked;
mps_dprint(sc, MPS_USER, "%s: Function %02X MsgFlags %02X\n", __func__,
hdr->Function, hdr->MsgFlags);
if (cmd->len > 0) {
buf = malloc(cmd->len, M_MPSUSER, M_WAITOK|M_ZERO);
cm->cm_data = buf;
cm->cm_length = cmd->len;
} else {
cm->cm_data = NULL;
cm->cm_length = 0;
}
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
err = mps_user_setup_request(cm, cmd);
if (err == EINVAL) {
mps_printf(sc, "%s: unsupported parameter or unsupported "
"function in request (function = 0x%X)\n", __func__,
hdr->Function);
}
if (err != 0)
goto RetFreeUnlocked;
mps_lock(sc);
err = mps_wait_command(sc, &cm, 60, CAN_SLEEP);
if (err || (cm == NULL)) {
mps_printf(sc, "%s: invalid request: error %d\n",
__func__, err);
goto RetFree;
}
rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply;
if (rpl != NULL)
sz = rpl->MsgLength * 4;
else
sz = 0;
if (sz > cmd->rpl_len) {
mps_printf(sc, "%s: user reply buffer (%d) smaller than "
"returned buffer (%d)\n", __func__, cmd->rpl_len, sz);
sz = cmd->rpl_len;
}
mps_unlock(sc);
copyout(rpl, cmd->rpl, sz);
if (buf != NULL)
copyout(buf, cmd->buf, cmd->len);
mps_dprint(sc, MPS_USER, "%s: reply size %d\n", __func__, sz);
RetFreeUnlocked:
mps_lock(sc);
RetFree:
if (cm != NULL)
mps_free_command(sc, cm);
mps_unlock(sc);
if (buf != NULL)
free(buf, M_MPSUSER);
return (err);
}
static int
mps_user_pass_thru(struct mps_softc *sc, mps_pass_thru_t *data)
{
MPI2_REQUEST_HEADER *hdr, tmphdr;
MPI2_DEFAULT_REPLY *rpl = NULL;
struct mps_command *cm = NULL;
int err = 0, dir = 0, sz;
uint8_t function = 0;
u_int sense_len;
struct mpssas_target *targ = NULL;
/*
* Only allow one passthru command at a time. Use the MPS_FLAGS_BUSY
* bit to denote that a passthru is being processed.
*/
mps_lock(sc);
if (sc->mps_flags & MPS_FLAGS_BUSY) {
mps_dprint(sc, MPS_USER, "%s: Only one passthru command "
"allowed at a single time.", __func__);
mps_unlock(sc);
return (EBUSY);
}
sc->mps_flags |= MPS_FLAGS_BUSY;
mps_unlock(sc);
/*
* Do some validation on data direction. Valid cases are:
* 1) DataSize is 0 and direction is NONE
* 2) DataSize is non-zero and one of:
* a) direction is READ or
* b) direction is WRITE or
* c) direction is BOTH and DataOutSize is non-zero
* If valid and the direction is BOTH, change the direction to READ.
* if valid and the direction is not BOTH, make sure DataOutSize is 0.
*/
if (((data->DataSize == 0) &&
(data->DataDirection == MPS_PASS_THRU_DIRECTION_NONE)) ||
((data->DataSize != 0) &&
((data->DataDirection == MPS_PASS_THRU_DIRECTION_READ) ||
(data->DataDirection == MPS_PASS_THRU_DIRECTION_WRITE) ||
((data->DataDirection == MPS_PASS_THRU_DIRECTION_BOTH) &&
(data->DataOutSize != 0))))) {
if (data->DataDirection == MPS_PASS_THRU_DIRECTION_BOTH)
data->DataDirection = MPS_PASS_THRU_DIRECTION_READ;
else
data->DataOutSize = 0;
} else
return (EINVAL);
mps_dprint(sc, MPS_USER, "%s: req 0x%jx %d rpl 0x%jx %d "
"data in 0x%jx %d data out 0x%jx %d data dir %d\n", __func__,
data->PtrRequest, data->RequestSize, data->PtrReply,
data->ReplySize, data->PtrData, data->DataSize,
data->PtrDataOut, data->DataOutSize, data->DataDirection);
/*
* copy in the header so we know what we're dealing with before we
* commit to allocating a command for it.
*/
err = copyin(PTRIN(data->PtrRequest), &tmphdr, data->RequestSize);
if (err != 0)
goto RetFreeUnlocked;
if (data->RequestSize > (int)sc->facts->IOCRequestFrameSize * 4) {
err = EINVAL;
goto RetFreeUnlocked;
}
function = tmphdr.Function;
mps_dprint(sc, MPS_USER, "%s: Function %02X MsgFlags %02X\n", __func__,
function, tmphdr.MsgFlags);
/*
* Handle a passthru TM request.
*/
if (function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
MPI2_SCSI_TASK_MANAGE_REQUEST *task;
mps_lock(sc);
cm = mpssas_alloc_tm(sc);
if (cm == NULL) {
err = EINVAL;
goto Ret;
}
/* Copy the header in. Only a small fixup is needed. */
task = (MPI2_SCSI_TASK_MANAGE_REQUEST *)cm->cm_req;
bcopy(&tmphdr, task, data->RequestSize);
task->TaskMID = cm->cm_desc.Default.SMID;
cm->cm_data = NULL;
cm->cm_desc.HighPriority.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
cm->cm_complete = NULL;
cm->cm_complete_data = NULL;
targ = mpssas_find_target_by_handle(sc->sassc, 0,
task->DevHandle);
if (targ == NULL) {
mps_dprint(sc, MPS_INFO,
"%s %d : invalid handle for requested TM 0x%x \n",
__func__, __LINE__, task->DevHandle);
err = 1;
} else {
mpssas_prepare_for_tm(sc, cm, targ, CAM_LUN_WILDCARD);
err = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
}
if (err != 0) {
err = EIO;
mps_dprint(sc, MPS_FAULT, "%s: task management failed",
__func__);
}
/*
* Copy the reply data and sense data to user space.
*/
if ((cm != NULL) && (cm->cm_reply != NULL)) {
rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply;
sz = rpl->MsgLength * 4;
if (sz > data->ReplySize) {
mps_printf(sc, "%s: user reply buffer (%d) "
"smaller than returned buffer (%d)\n",
__func__, data->ReplySize, sz);
}
mps_unlock(sc);
copyout(cm->cm_reply, PTRIN(data->PtrReply),
data->ReplySize);
mps_lock(sc);
}
mpssas_free_tm(sc, cm);
goto Ret;
}
mps_lock(sc);
cm = mps_alloc_command(sc);
if (cm == NULL) {
mps_printf(sc, "%s: no mps requests\n", __func__);
err = ENOMEM;
goto Ret;
}
mps_unlock(sc);
hdr = (MPI2_REQUEST_HEADER *)cm->cm_req;
bcopy(&tmphdr, hdr, data->RequestSize);
/*
* Do some checking to make sure the IOCTL request contains a valid
* request. Then set the SGL info.
*/
mpi_init_sge(cm, hdr, (void *)((uint8_t *)hdr + data->RequestSize));
/*
* Set up for read, write or both. From check above, DataOutSize will
* be 0 if direction is READ or WRITE, but it will have some non-zero
* value if the direction is BOTH. So, just use the biggest size to get
* the cm_data buffer size. If direction is BOTH, 2 SGLs need to be set
* up; the first is for the request and the second will contain the
* response data. cm_out_len needs to be set here and this will be used
* when the SGLs are set up.
*/
cm->cm_data = NULL;
cm->cm_length = MAX(data->DataSize, data->DataOutSize);
cm->cm_out_len = data->DataOutSize;
cm->cm_flags = 0;
if (cm->cm_length != 0) {
cm->cm_data = malloc(cm->cm_length, M_MPSUSER, M_WAITOK |
M_ZERO);
cm->cm_flags = MPS_CM_FLAGS_DATAIN;
if (data->DataOutSize) {
cm->cm_flags |= MPS_CM_FLAGS_DATAOUT;
err = copyin(PTRIN(data->PtrDataOut),
cm->cm_data, data->DataOutSize);
} else if (data->DataDirection ==
MPS_PASS_THRU_DIRECTION_WRITE) {
cm->cm_flags = MPS_CM_FLAGS_DATAOUT;
err = copyin(PTRIN(data->PtrData),
cm->cm_data, data->DataSize);
}
if (err != 0)
mps_dprint(sc, MPS_FAULT, "%s: failed to copy "
"IOCTL data from user space\n", __func__);
}
cm->cm_flags |= MPS_CM_FLAGS_SGE_SIMPLE;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
/*
* Set up Sense buffer and SGL offset for IO passthru. SCSI IO request
* uses SCSI IO descriptor.
*/
if ((function == MPI2_FUNCTION_SCSI_IO_REQUEST) ||
(function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
MPI2_SCSI_IO_REQUEST *scsi_io_req;
scsi_io_req = (MPI2_SCSI_IO_REQUEST *)hdr;
/*
* Put SGE for data and data_out buffer at the end of
* scsi_io_request message header (64 bytes in total).
* Following above SGEs, the residual space will be used by
* sense data.
*/
scsi_io_req->SenseBufferLength = (uint8_t)(data->RequestSize -
64);
scsi_io_req->SenseBufferLowAddress = htole32(cm->cm_sense_busaddr);
/*
* Set SGLOffset0 value. This is the number of dwords that SGL
* is offset from the beginning of MPI2_SCSI_IO_REQUEST struct.
*/
scsi_io_req->SGLOffset0 = 24;
/*
* Setup descriptor info. RAID passthrough must use the
* default request descriptor which is already set, so if this
* is a SCSI IO request, change the descriptor to SCSI IO.
* Also, if this is a SCSI IO request, handle the reply in the
* mpssas_scsio_complete function.
*/
if (function == MPI2_FUNCTION_SCSI_IO_REQUEST) {
cm->cm_desc.SCSIIO.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
cm->cm_desc.SCSIIO.DevHandle = scsi_io_req->DevHandle;
/*
* Make sure the DevHandle is not 0 because this is a
* likely error.
*/
if (scsi_io_req->DevHandle == 0) {
err = EINVAL;
goto RetFreeUnlocked;
}
}
}
mps_lock(sc);
err = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
if (err || (cm == NULL)) {
mps_printf(sc, "%s: invalid request: error %d\n", __func__,
err);
mps_unlock(sc);
goto RetFreeUnlocked;
}
/*
* Sync the DMA data, if any. Then copy the data to user space.
*/
if (cm->cm_data != NULL) {
if (cm->cm_flags & MPS_CM_FLAGS_DATAIN)
dir = BUS_DMASYNC_POSTREAD;
else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT)
dir = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir);
bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
if (cm->cm_flags & MPS_CM_FLAGS_DATAIN) {
mps_unlock(sc);
err = copyout(cm->cm_data,
PTRIN(data->PtrData), data->DataSize);
mps_lock(sc);
if (err != 0)
mps_dprint(sc, MPS_FAULT, "%s: failed to copy "
"IOCTL data to user space\n", __func__);
}
}
/*
* Copy the reply data and sense data to user space.
*/
if (cm->cm_reply != NULL) {
rpl = (MPI2_DEFAULT_REPLY *)cm->cm_reply;
sz = rpl->MsgLength * 4;
if (sz > data->ReplySize) {
mps_printf(sc, "%s: user reply buffer (%d) smaller "
"than returned buffer (%d)\n", __func__,
data->ReplySize, sz);
}
mps_unlock(sc);
copyout(cm->cm_reply, PTRIN(data->PtrReply), data->ReplySize);
mps_lock(sc);
if ((function == MPI2_FUNCTION_SCSI_IO_REQUEST) ||
(function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH)) {
if (((MPI2_SCSI_IO_REPLY *)rpl)->SCSIState &
MPI2_SCSI_STATE_AUTOSENSE_VALID) {
sense_len =
MIN((le32toh(((MPI2_SCSI_IO_REPLY *)rpl)->SenseCount)),
sizeof(struct scsi_sense_data));
mps_unlock(sc);
copyout(cm->cm_sense, cm->cm_req + 64, sense_len);
mps_lock(sc);
}
}
}
mps_unlock(sc);
RetFreeUnlocked:
mps_lock(sc);
if (cm != NULL) {
if (cm->cm_data)
free(cm->cm_data, M_MPSUSER);
mps_free_command(sc, cm);
}
Ret:
sc->mps_flags &= ~MPS_FLAGS_BUSY;
mps_unlock(sc);
return (err);
}
static void
mps_user_get_adapter_data(struct mps_softc *sc, mps_adapter_data_t *data)
{
Mpi2ConfigReply_t mpi_reply;
Mpi2BiosPage3_t config_page;
/*
* Use the PCI interface functions to get the Bus, Device, and Function
* information.
*/
data->PciInformation.u.bits.BusNumber = pci_get_bus(sc->mps_dev);
data->PciInformation.u.bits.DeviceNumber = pci_get_slot(sc->mps_dev);
data->PciInformation.u.bits.FunctionNumber =
pci_get_function(sc->mps_dev);
/*
* Get the FW version that should already be saved in IOC Facts.
*/
data->MpiFirmwareVersion = sc->facts->FWVersion.Word;
/*
* General device info.
*/
data->AdapterType = MPSIOCTL_ADAPTER_TYPE_SAS2;
if (sc->mps_flags & MPS_FLAGS_WD_AVAILABLE)
data->AdapterType = MPSIOCTL_ADAPTER_TYPE_SAS2_SSS6200;
data->PCIDeviceHwId = pci_get_device(sc->mps_dev);
data->PCIDeviceHwRev = pci_read_config(sc->mps_dev, PCIR_REVID, 1);
data->SubSystemId = pci_get_subdevice(sc->mps_dev);
data->SubsystemVendorId = pci_get_subvendor(sc->mps_dev);
/*
* Get the driver version.
*/
strcpy((char *)&data->DriverVersion[0], MPS_DRIVER_VERSION);
/*
* Need to get BIOS Config Page 3 for the BIOS Version.
*/
data->BiosVersion = 0;
mps_lock(sc);
if (mps_config_get_bios_pg3(sc, &mpi_reply, &config_page))
printf("%s: Error while retrieving BIOS Version\n", __func__);
else
data->BiosVersion = config_page.BiosVersion;
mps_unlock(sc);
}
static void
mps_user_read_pci_info(struct mps_softc *sc, mps_pci_info_t *data)
{
int i;
/*
* Use the PCI interface functions to get the Bus, Device, and Function
* information.
*/
data->BusNumber = pci_get_bus(sc->mps_dev);
data->DeviceNumber = pci_get_slot(sc->mps_dev);
data->FunctionNumber = pci_get_function(sc->mps_dev);
/*
* Now get the interrupt vector and the pci header. The vector can
* only be 0 right now. The header is the first 256 bytes of config
* space.
*/
data->InterruptVector = 0;
for (i = 0; i < sizeof (data->PciHeader); i++) {
data->PciHeader[i] = pci_read_config(sc->mps_dev, i, 1);
}
}
static uint8_t
mps_get_fw_diag_buffer_number(struct mps_softc *sc, uint32_t unique_id)
{
uint8_t index;
for (index = 0; index < MPI2_DIAG_BUF_TYPE_COUNT; index++) {
if (sc->fw_diag_buffer_list[index].unique_id == unique_id) {
return (index);
}
}
return (MPS_FW_DIAGNOSTIC_UID_NOT_FOUND);
}
static int
mps_post_fw_diag_buffer(struct mps_softc *sc,
mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code)
{
MPI2_DIAG_BUFFER_POST_REQUEST *req;
MPI2_DIAG_BUFFER_POST_REPLY *reply = NULL;
struct mps_command *cm = NULL;
int i, status;
/*
* If buffer is not enabled, just leave.
*/
*return_code = MPS_FW_DIAG_ERROR_POST_FAILED;
if (!pBuffer->enabled) {
return (MPS_DIAG_FAILURE);
}
/*
* Clear some flags initially.
*/
pBuffer->force_release = FALSE;
pBuffer->valid_data = FALSE;
pBuffer->owned_by_firmware = FALSE;
/*
* Get a command.
*/
cm = mps_alloc_command(sc);
if (cm == NULL) {
mps_printf(sc, "%s: no mps requests\n", __func__);
return (MPS_DIAG_FAILURE);
}
/*
* Build the request for releasing the FW Diag Buffer and send it.
*/
req = (MPI2_DIAG_BUFFER_POST_REQUEST *)cm->cm_req;
req->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
req->BufferType = pBuffer->buffer_type;
req->ExtendedType = pBuffer->extended_type;
req->BufferLength = pBuffer->size;
for (i = 0; i < (sizeof(req->ProductSpecific) / 4); i++)
req->ProductSpecific[i] = pBuffer->product_specific[i];
mps_from_u64(sc->fw_diag_busaddr, &req->BufferAddress);
cm->cm_data = NULL;
cm->cm_length = 0;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_complete_data = NULL;
/*
* Send command synchronously.
*/
status = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
if (status || (cm == NULL)) {
mps_printf(sc, "%s: invalid request: error %d\n", __func__,
status);
status = MPS_DIAG_FAILURE;
goto done;
}
/*
* Process POST reply.
*/
reply = (MPI2_DIAG_BUFFER_POST_REPLY *)cm->cm_reply;
if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS) {
status = MPS_DIAG_FAILURE;
mps_dprint(sc, MPS_FAULT, "%s: post of FW Diag Buffer failed "
"with IOCStatus = 0x%x, IOCLogInfo = 0x%x and "
"TransferLength = 0x%x\n", __func__,
le16toh(reply->IOCStatus), le32toh(reply->IOCLogInfo),
le32toh(reply->TransferLength));
goto done;
}
/*
* Post was successful.
*/
pBuffer->valid_data = TRUE;
pBuffer->owned_by_firmware = TRUE;
*return_code = MPS_FW_DIAG_ERROR_SUCCESS;
status = MPS_DIAG_SUCCESS;
done:
if (cm != NULL)
mps_free_command(sc, cm);
return (status);
}
static int
mps_release_fw_diag_buffer(struct mps_softc *sc,
mps_fw_diagnostic_buffer_t *pBuffer, uint32_t *return_code,
uint32_t diag_type)
{
MPI2_DIAG_RELEASE_REQUEST *req;
MPI2_DIAG_RELEASE_REPLY *reply = NULL;
struct mps_command *cm = NULL;
int status;
/*
* If buffer is not enabled, just leave.
*/
*return_code = MPS_FW_DIAG_ERROR_RELEASE_FAILED;
if (!pBuffer->enabled) {
mps_dprint(sc, MPS_USER, "%s: This buffer type is not "
"supported by the IOC", __func__);
return (MPS_DIAG_FAILURE);
}
/*
* Clear some flags initially.
*/
pBuffer->force_release = FALSE;
pBuffer->valid_data = FALSE;
pBuffer->owned_by_firmware = FALSE;
/*
* Get a command.
*/
cm = mps_alloc_command(sc);
if (cm == NULL) {
mps_printf(sc, "%s: no mps requests\n", __func__);
return (MPS_DIAG_FAILURE);
}
/*
* Build the request for releasing the FW Diag Buffer and send it.
*/
req = (MPI2_DIAG_RELEASE_REQUEST *)cm->cm_req;
req->Function = MPI2_FUNCTION_DIAG_RELEASE;
req->BufferType = pBuffer->buffer_type;
cm->cm_data = NULL;
cm->cm_length = 0;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_complete_data = NULL;
/*
* Send command synchronously.
*/
status = mps_wait_command(sc, &cm, 30, CAN_SLEEP);
if (status || (cm == NULL)) {
mps_printf(sc, "%s: invalid request: error %d\n", __func__,
status);
status = MPS_DIAG_FAILURE;
goto done;
}
/*
* Process RELEASE reply.
*/
reply = (MPI2_DIAG_RELEASE_REPLY *)cm->cm_reply;
if (((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS) || pBuffer->owned_by_firmware) {
status = MPS_DIAG_FAILURE;
mps_dprint(sc, MPS_FAULT, "%s: release of FW Diag Buffer "
"failed with IOCStatus = 0x%x and IOCLogInfo = 0x%x\n",
__func__, le16toh(reply->IOCStatus),
le32toh(reply->IOCLogInfo));
goto done;
}
/*
* Release was successful.
*/
*return_code = MPS_FW_DIAG_ERROR_SUCCESS;
status = MPS_DIAG_SUCCESS;
/*
* If this was for an UNREGISTER diag type command, clear the unique ID.
*/
if (diag_type == MPS_FW_DIAG_TYPE_UNREGISTER) {
pBuffer->unique_id = MPS_FW_DIAG_INVALID_UID;
}
done:
if (cm != NULL)
mps_free_command(sc, cm);
return (status);
}
static int
mps_diag_register(struct mps_softc *sc, mps_fw_diag_register_t *diag_register,
uint32_t *return_code)
{
mps_fw_diagnostic_buffer_t *pBuffer;
uint8_t extended_type, buffer_type, i;
uint32_t buffer_size;
uint32_t unique_id;
int status;
extended_type = diag_register->ExtendedType;
buffer_type = diag_register->BufferType;
buffer_size = diag_register->RequestedBufferSize;
unique_id = diag_register->UniqueId;
/*
* Check for valid buffer type
*/
if (buffer_type >= MPI2_DIAG_BUF_TYPE_COUNT) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
return (MPS_DIAG_FAILURE);
}
/*
* Get the current buffer and look up the unique ID. The unique ID
* should not be found. If it is, the ID is already in use.
*/
i = mps_get_fw_diag_buffer_number(sc, unique_id);
pBuffer = &sc->fw_diag_buffer_list[buffer_type];
if (i != MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
return (MPS_DIAG_FAILURE);
}
/*
* The buffer's unique ID should not be registered yet, and the given
* unique ID cannot be 0.
*/
if ((pBuffer->unique_id != MPS_FW_DIAG_INVALID_UID) ||
(unique_id == MPS_FW_DIAG_INVALID_UID)) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
return (MPS_DIAG_FAILURE);
}
/*
* If this buffer is already posted as immediate, just change owner.
*/
if (pBuffer->immediate && pBuffer->owned_by_firmware &&
(pBuffer->unique_id == MPS_FW_DIAG_INVALID_UID)) {
pBuffer->immediate = FALSE;
pBuffer->unique_id = unique_id;
return (MPS_DIAG_SUCCESS);
}
/*
* Post a new buffer after checking if it's enabled. The DMA buffer
* that is allocated will be contiguous (nsegments = 1).
*/
if (!pBuffer->enabled) {
*return_code = MPS_FW_DIAG_ERROR_NO_BUFFER;
return (MPS_DIAG_FAILURE);
}
if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
buffer_size, /* maxsize */
1, /* nsegments */
buffer_size, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->fw_diag_dmat)) {
device_printf(sc->mps_dev, "Cannot allocate FW diag buffer DMA "
"tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->fw_diag_dmat, (void **)&sc->fw_diag_buffer,
BUS_DMA_NOWAIT, &sc->fw_diag_map)) {
device_printf(sc->mps_dev, "Cannot allocate FW diag buffer "
"memory\n");
return (ENOMEM);
}
bzero(sc->fw_diag_buffer, buffer_size);
bus_dmamap_load(sc->fw_diag_dmat, sc->fw_diag_map, sc->fw_diag_buffer,
buffer_size, mps_memaddr_cb, &sc->fw_diag_busaddr, 0);
pBuffer->size = buffer_size;
/*
* Copy the given info to the diag buffer and post the buffer.
*/
pBuffer->buffer_type = buffer_type;
pBuffer->immediate = FALSE;
if (buffer_type == MPI2_DIAG_BUF_TYPE_TRACE) {
for (i = 0; i < (sizeof (pBuffer->product_specific) / 4);
i++) {
pBuffer->product_specific[i] =
diag_register->ProductSpecific[i];
}
}
pBuffer->extended_type = extended_type;
pBuffer->unique_id = unique_id;
status = mps_post_fw_diag_buffer(sc, pBuffer, return_code);
/*
* In case there was a failure, free the DMA buffer.
*/
if (status == MPS_DIAG_FAILURE) {
if (sc->fw_diag_busaddr != 0)
bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map);
if (sc->fw_diag_buffer != NULL)
bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer,
sc->fw_diag_map);
if (sc->fw_diag_dmat != NULL)
bus_dma_tag_destroy(sc->fw_diag_dmat);
}
return (status);
}
static int
mps_diag_unregister(struct mps_softc *sc,
mps_fw_diag_unregister_t *diag_unregister, uint32_t *return_code)
{
mps_fw_diagnostic_buffer_t *pBuffer;
uint8_t i;
uint32_t unique_id;
int status;
unique_id = diag_unregister->UniqueId;
/*
* Get the current buffer and look up the unique ID. The unique ID
* should be there.
*/
i = mps_get_fw_diag_buffer_number(sc, unique_id);
if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
return (MPS_DIAG_FAILURE);
}
pBuffer = &sc->fw_diag_buffer_list[i];
/*
* Try to release the buffer from FW before freeing it. If release
* fails, don't free the DMA buffer in case FW tries to access it
* later. If buffer is not owned by firmware, can't release it.
*/
if (!pBuffer->owned_by_firmware) {
status = MPS_DIAG_SUCCESS;
} else {
status = mps_release_fw_diag_buffer(sc, pBuffer, return_code,
MPS_FW_DIAG_TYPE_UNREGISTER);
}
/*
* At this point, return the current status no matter what happens with
* the DMA buffer.
*/
pBuffer->unique_id = MPS_FW_DIAG_INVALID_UID;
if (status == MPS_DIAG_SUCCESS) {
if (sc->fw_diag_busaddr != 0)
bus_dmamap_unload(sc->fw_diag_dmat, sc->fw_diag_map);
if (sc->fw_diag_buffer != NULL)
bus_dmamem_free(sc->fw_diag_dmat, sc->fw_diag_buffer,
sc->fw_diag_map);
if (sc->fw_diag_dmat != NULL)
bus_dma_tag_destroy(sc->fw_diag_dmat);
}
return (status);
}
static int
mps_diag_query(struct mps_softc *sc, mps_fw_diag_query_t *diag_query,
uint32_t *return_code)
{
mps_fw_diagnostic_buffer_t *pBuffer;
uint8_t i;
uint32_t unique_id;
unique_id = diag_query->UniqueId;
/*
* If ID is valid, query on ID.
* If ID is invalid, query on buffer type.
*/
if (unique_id == MPS_FW_DIAG_INVALID_UID) {
i = diag_query->BufferType;
if (i >= MPI2_DIAG_BUF_TYPE_COUNT) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
return (MPS_DIAG_FAILURE);
}
} else {
i = mps_get_fw_diag_buffer_number(sc, unique_id);
if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
return (MPS_DIAG_FAILURE);
}
}
/*
* Fill query structure with the diag buffer info.
*/
pBuffer = &sc->fw_diag_buffer_list[i];
diag_query->BufferType = pBuffer->buffer_type;
diag_query->ExtendedType = pBuffer->extended_type;
if (diag_query->BufferType == MPI2_DIAG_BUF_TYPE_TRACE) {
for (i = 0; i < (sizeof(diag_query->ProductSpecific) / 4);
i++) {
diag_query->ProductSpecific[i] =
pBuffer->product_specific[i];
}
}
diag_query->TotalBufferSize = pBuffer->size;
diag_query->DriverAddedBufferSize = 0;
diag_query->UniqueId = pBuffer->unique_id;
diag_query->ApplicationFlags = 0;
diag_query->DiagnosticFlags = 0;
/*
* Set/Clear application flags
*/
if (pBuffer->immediate) {
diag_query->ApplicationFlags &= ~MPS_FW_DIAG_FLAG_APP_OWNED;
} else {
diag_query->ApplicationFlags |= MPS_FW_DIAG_FLAG_APP_OWNED;
}
if (pBuffer->valid_data || pBuffer->owned_by_firmware) {
diag_query->ApplicationFlags |= MPS_FW_DIAG_FLAG_BUFFER_VALID;
} else {
diag_query->ApplicationFlags &= ~MPS_FW_DIAG_FLAG_BUFFER_VALID;
}
if (pBuffer->owned_by_firmware) {
diag_query->ApplicationFlags |=
MPS_FW_DIAG_FLAG_FW_BUFFER_ACCESS;
} else {
diag_query->ApplicationFlags &=
~MPS_FW_DIAG_FLAG_FW_BUFFER_ACCESS;
}
return (MPS_DIAG_SUCCESS);
}
static int
mps_diag_read_buffer(struct mps_softc *sc,
mps_diag_read_buffer_t *diag_read_buffer, uint8_t *ioctl_buf,
uint32_t *return_code)
{
mps_fw_diagnostic_buffer_t *pBuffer;
uint8_t i, *pData;
uint32_t unique_id;
int status;
unique_id = diag_read_buffer->UniqueId;
/*
* Get the current buffer and look up the unique ID. The unique ID
* should be there.
*/
i = mps_get_fw_diag_buffer_number(sc, unique_id);
if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
return (MPS_DIAG_FAILURE);
}
pBuffer = &sc->fw_diag_buffer_list[i];
/*
* Make sure requested read is within limits
*/
if (diag_read_buffer->StartingOffset + diag_read_buffer->BytesToRead >
pBuffer->size) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
return (MPS_DIAG_FAILURE);
}
/*
* Copy the requested data from DMA to the diag_read_buffer. The DMA
* buffer that was allocated is one contiguous buffer.
*/
pData = (uint8_t *)(sc->fw_diag_buffer +
diag_read_buffer->StartingOffset);
if (copyout(pData, ioctl_buf, diag_read_buffer->BytesToRead) != 0)
return (MPS_DIAG_FAILURE);
diag_read_buffer->Status = 0;
/*
* Set or clear the Force Release flag.
*/
if (pBuffer->force_release) {
diag_read_buffer->Flags |= MPS_FW_DIAG_FLAG_FORCE_RELEASE;
} else {
diag_read_buffer->Flags &= ~MPS_FW_DIAG_FLAG_FORCE_RELEASE;
}
/*
* If buffer is to be reregistered, make sure it's not already owned by
* firmware first.
*/
status = MPS_DIAG_SUCCESS;
if (!pBuffer->owned_by_firmware) {
if (diag_read_buffer->Flags & MPS_FW_DIAG_FLAG_REREGISTER) {
status = mps_post_fw_diag_buffer(sc, pBuffer,
return_code);
}
}
return (status);
}
static int
mps_diag_release(struct mps_softc *sc, mps_fw_diag_release_t *diag_release,
uint32_t *return_code)
{
mps_fw_diagnostic_buffer_t *pBuffer;
uint8_t i;
uint32_t unique_id;
int status;
unique_id = diag_release->UniqueId;
/*
* Get the current buffer and look up the unique ID. The unique ID
* should be there.
*/
i = mps_get_fw_diag_buffer_number(sc, unique_id);
if (i == MPS_FW_DIAGNOSTIC_UID_NOT_FOUND) {
*return_code = MPS_FW_DIAG_ERROR_INVALID_UID;
return (MPS_DIAG_FAILURE);
}
pBuffer = &sc->fw_diag_buffer_list[i];
/*
* If buffer is not owned by firmware, it's already been released.
*/
if (!pBuffer->owned_by_firmware) {
*return_code = MPS_FW_DIAG_ERROR_ALREADY_RELEASED;
return (MPS_DIAG_FAILURE);
}
/*
* Release the buffer.
*/
status = mps_release_fw_diag_buffer(sc, pBuffer, return_code,
MPS_FW_DIAG_TYPE_RELEASE);
return (status);
}
static int
mps_do_diag_action(struct mps_softc *sc, uint32_t action, uint8_t *diag_action,
uint32_t length, uint32_t *return_code)
{
mps_fw_diag_register_t diag_register;
mps_fw_diag_unregister_t diag_unregister;
mps_fw_diag_query_t diag_query;
mps_diag_read_buffer_t diag_read_buffer;
mps_fw_diag_release_t diag_release;
int status = MPS_DIAG_SUCCESS;
uint32_t original_return_code;
original_return_code = *return_code;
*return_code = MPS_FW_DIAG_ERROR_SUCCESS;
switch (action) {
case MPS_FW_DIAG_TYPE_REGISTER:
if (!length) {
*return_code =
MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
status = MPS_DIAG_FAILURE;
break;
}
if (copyin(diag_action, &diag_register,
sizeof(diag_register)) != 0)
return (MPS_DIAG_FAILURE);
status = mps_diag_register(sc, &diag_register,
return_code);
break;
case MPS_FW_DIAG_TYPE_UNREGISTER:
if (length < sizeof(diag_unregister)) {
*return_code =
MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
status = MPS_DIAG_FAILURE;
break;
}
if (copyin(diag_action, &diag_unregister,
sizeof(diag_unregister)) != 0)
return (MPS_DIAG_FAILURE);
status = mps_diag_unregister(sc, &diag_unregister,
return_code);
break;
case MPS_FW_DIAG_TYPE_QUERY:
if (length < sizeof (diag_query)) {
*return_code =
MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
status = MPS_DIAG_FAILURE;
break;
}
if (copyin(diag_action, &diag_query, sizeof(diag_query))
!= 0)
return (MPS_DIAG_FAILURE);
status = mps_diag_query(sc, &diag_query, return_code);
if (status == MPS_DIAG_SUCCESS)
if (copyout(&diag_query, diag_action,
sizeof (diag_query)) != 0)
return (MPS_DIAG_FAILURE);
break;
case MPS_FW_DIAG_TYPE_READ_BUFFER:
if (copyin(diag_action, &diag_read_buffer,
sizeof(diag_read_buffer)) != 0)
return (MPS_DIAG_FAILURE);
if (length < diag_read_buffer.BytesToRead) {
*return_code =
MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
status = MPS_DIAG_FAILURE;
break;
}
status = mps_diag_read_buffer(sc, &diag_read_buffer,
PTRIN(diag_read_buffer.PtrDataBuffer),
return_code);
if (status == MPS_DIAG_SUCCESS) {
if (copyout(&diag_read_buffer, diag_action,
sizeof(diag_read_buffer) -
sizeof(diag_read_buffer.PtrDataBuffer)) !=
0)
return (MPS_DIAG_FAILURE);
}
break;
case MPS_FW_DIAG_TYPE_RELEASE:
if (length < sizeof(diag_release)) {
*return_code =
MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
status = MPS_DIAG_FAILURE;
break;
}
if (copyin(diag_action, &diag_release,
sizeof(diag_release)) != 0)
return (MPS_DIAG_FAILURE);
status = mps_diag_release(sc, &diag_release,
return_code);
break;
default:
*return_code = MPS_FW_DIAG_ERROR_INVALID_PARAMETER;
status = MPS_DIAG_FAILURE;
break;
}
if ((status == MPS_DIAG_FAILURE) &&
(original_return_code == MPS_FW_DIAG_NEW) &&
(*return_code != MPS_FW_DIAG_ERROR_SUCCESS))
status = MPS_DIAG_SUCCESS;
return (status);
}
static int
mps_user_diag_action(struct mps_softc *sc, mps_diag_action_t *data)
{
int status;
/*
* Only allow one diag action at one time.
*/
if (sc->mps_flags & MPS_FLAGS_BUSY) {
mps_dprint(sc, MPS_USER, "%s: Only one FW diag command "
"allowed at a single time.", __func__);
return (EBUSY);
}
sc->mps_flags |= MPS_FLAGS_BUSY;
/*
* Send diag action request
*/
if (data->Action == MPS_FW_DIAG_TYPE_REGISTER ||
data->Action == MPS_FW_DIAG_TYPE_UNREGISTER ||
data->Action == MPS_FW_DIAG_TYPE_QUERY ||
data->Action == MPS_FW_DIAG_TYPE_READ_BUFFER ||
data->Action == MPS_FW_DIAG_TYPE_RELEASE) {
status = mps_do_diag_action(sc, data->Action,
PTRIN(data->PtrDiagAction), data->Length,
&data->ReturnCode);
} else
status = EINVAL;
sc->mps_flags &= ~MPS_FLAGS_BUSY;
return (status);
}
/*
* Copy the event recording mask and the event queue size out. For
* clarification, the event recording mask (events_to_record) is not the same
* thing as the event mask (event_mask). events_to_record has a bit set for
* every event type that is to be recorded by the driver, and event_mask has a
* bit cleared for every event that is allowed into the driver from the IOC.
* They really have nothing to do with each other.
*/
static void
mps_user_event_query(struct mps_softc *sc, mps_event_query_t *data)
{
uint8_t i;
mps_lock(sc);
data->Entries = MPS_EVENT_QUEUE_SIZE;
for (i = 0; i < 4; i++) {
data->Types[i] = sc->events_to_record[i];
}
mps_unlock(sc);
}
/*
* Set the driver's event mask according to what's been given. See
* mps_user_event_query for explanation of the event recording mask and the IOC
* event mask. It's the app's responsibility to enable event logging by setting
* the bits in events_to_record. Initially, no events will be logged.
*/
static void
mps_user_event_enable(struct mps_softc *sc, mps_event_enable_t *data)
{
uint8_t i;
mps_lock(sc);
for (i = 0; i < 4; i++) {
sc->events_to_record[i] = data->Types[i];
}
mps_unlock(sc);
}
/*
* Copy out the events that have been recorded, up to the max events allowed.
*/
static int
mps_user_event_report(struct mps_softc *sc, mps_event_report_t *data)
{
int status = 0;
uint32_t size;
mps_lock(sc);
size = data->Size;
if ((size >= sizeof(sc->recorded_events)) && (status == 0)) {
mps_unlock(sc);
if (copyout((void *)sc->recorded_events,
PTRIN(data->PtrEvents), size) != 0)
status = EFAULT;
mps_lock(sc);
} else {
/*
* data->Size value is not large enough to copy event data.
*/
status = EFAULT;
}
/*
* Change size value to match the number of bytes that were copied.
*/
if (status == 0)
data->Size = sizeof(sc->recorded_events);
mps_unlock(sc);
return (status);
}
/*
* Record events into the driver from the IOC if they are not masked.
*/
void
mpssas_record_event(struct mps_softc *sc,
MPI2_EVENT_NOTIFICATION_REPLY *event_reply)
{
uint32_t event;
int i, j;
uint16_t event_data_len;
boolean_t sendAEN = FALSE;
event = event_reply->Event;
/*
* Generate a system event to let anyone who cares know that a
* LOG_ENTRY_ADDED event has occurred. This is sent no matter what the
* event mask is set to.
*/
if (event == MPI2_EVENT_LOG_ENTRY_ADDED) {
sendAEN = TRUE;
}
/*
* Record the event only if its corresponding bit is set in
* events_to_record. event_index is the index into recorded_events and
* event_number is the overall number of an event being recorded since
* start-of-day. event_index will roll over; event_number will never
* roll over.
*/
i = (uint8_t)(event / 32);
j = (uint8_t)(event % 32);
if ((i < 4) && ((1 << j) & sc->events_to_record[i])) {
i = sc->event_index;
sc->recorded_events[i].Type = event;
sc->recorded_events[i].Number = ++sc->event_number;
bzero(sc->recorded_events[i].Data, MPS_MAX_EVENT_DATA_LENGTH *
4);
event_data_len = event_reply->EventDataLength;
if (event_data_len > 0) {
/*
* Limit data to size in m_event entry
*/
if (event_data_len > MPS_MAX_EVENT_DATA_LENGTH) {
event_data_len = MPS_MAX_EVENT_DATA_LENGTH;
}
for (j = 0; j < event_data_len; j++) {
sc->recorded_events[i].Data[j] =
event_reply->EventData[j];
}
/*
* check for index wrap-around
*/
if (++i == MPS_EVENT_QUEUE_SIZE) {
i = 0;
}
sc->event_index = (uint8_t)i;
/*
* Set flag to send the event.
*/
sendAEN = TRUE;
}
}
/*
* Generate a system event if flag is set to let anyone who cares know
* that an event has occurred.
*/
if (sendAEN) {
//SLM-how to send a system event (see kqueue, kevent)
// (void) ddi_log_sysevent(mpt->m_dip, DDI_VENDOR_LSI, "MPT_SAS",
// "SAS", NULL, NULL, DDI_NOSLEEP);
}
}
static int
mps_user_reg_access(struct mps_softc *sc, mps_reg_access_t *data)
{
int status = 0;
switch (data->Command) {
/*
* IO access is not supported.
*/
case REG_IO_READ:
case REG_IO_WRITE:
mps_dprint(sc, MPS_USER, "IO access is not supported. "
"Use memory access.");
status = EINVAL;
break;
case REG_MEM_READ:
data->RegData = mps_regread(sc, data->RegOffset);
break;
case REG_MEM_WRITE:
mps_regwrite(sc, data->RegOffset, data->RegData);
break;
default:
status = EINVAL;
break;
}
return (status);
}
static int
mps_user_btdh(struct mps_softc *sc, mps_btdh_mapping_t *data)
{
uint8_t bt2dh = FALSE;
uint8_t dh2bt = FALSE;
uint16_t dev_handle, bus, target;
bus = data->Bus;
target = data->TargetID;
dev_handle = data->DevHandle;
/*
* When DevHandle is 0xFFFF and Bus/Target are not 0xFFFF, use Bus/
* Target to get DevHandle. When Bus/Target are 0xFFFF and DevHandle is
* not 0xFFFF, use DevHandle to get Bus/Target. Anything else is
* invalid.
*/
if ((bus == 0xFFFF) && (target == 0xFFFF) && (dev_handle != 0xFFFF))
dh2bt = TRUE;
if ((dev_handle == 0xFFFF) && (bus != 0xFFFF) && (target != 0xFFFF))
bt2dh = TRUE;
if (!dh2bt && !bt2dh)
return (EINVAL);
/*
* Only handle bus of 0. Make sure target is within range.
*/
if (bt2dh) {
if (bus != 0)
return (EINVAL);
if (target > sc->max_devices) {
mps_dprint(sc, MPS_FAULT, "Target ID is out of range "
"for Bus/Target to DevHandle mapping.");
return (EINVAL);
}
dev_handle = sc->mapping_table[target].dev_handle;
if (dev_handle)
data->DevHandle = dev_handle;
} else {
bus = 0;
target = mps_mapping_get_tid_from_handle(sc, dev_handle);
data->Bus = bus;
data->TargetID = target;
}
return (0);
}
static int
mps_ioctl(struct cdev *dev, u_long cmd, void *arg, int flag,
struct thread *td)
{
struct mps_softc *sc;
struct mps_cfg_page_req *page_req;
struct mps_ext_cfg_page_req *ext_page_req;
void *mps_page;
int error, msleep_ret;
mps_page = NULL;
sc = dev->si_drv1;
page_req = (void *)arg;
ext_page_req = (void *)arg;
switch (cmd) {
case MPSIO_READ_CFG_HEADER:
mps_lock(sc);
error = mps_user_read_cfg_header(sc, page_req);
mps_unlock(sc);
break;
case MPSIO_READ_CFG_PAGE:
mps_page = malloc(page_req->len, M_MPSUSER, M_WAITOK | M_ZERO);
error = copyin(page_req->buf, mps_page,
sizeof(MPI2_CONFIG_PAGE_HEADER));
if (error)
break;
mps_lock(sc);
error = mps_user_read_cfg_page(sc, page_req, mps_page);
mps_unlock(sc);
if (error)
break;
error = copyout(mps_page, page_req->buf, page_req->len);
break;
case MPSIO_READ_EXT_CFG_HEADER:
mps_lock(sc);
error = mps_user_read_extcfg_header(sc, ext_page_req);
mps_unlock(sc);
break;
case MPSIO_READ_EXT_CFG_PAGE:
mps_page = malloc(ext_page_req->len, M_MPSUSER, M_WAITOK|M_ZERO);
error = copyin(ext_page_req->buf, mps_page,
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
if (error)
break;
mps_lock(sc);
error = mps_user_read_extcfg_page(sc, ext_page_req, mps_page);
mps_unlock(sc);
if (error)
break;
error = copyout(mps_page, ext_page_req->buf, ext_page_req->len);
break;
case MPSIO_WRITE_CFG_PAGE:
mps_page = malloc(page_req->len, M_MPSUSER, M_WAITOK|M_ZERO);
error = copyin(page_req->buf, mps_page, page_req->len);
if (error)
break;
mps_lock(sc);
error = mps_user_write_cfg_page(sc, page_req, mps_page);
mps_unlock(sc);
break;
case MPSIO_MPS_COMMAND:
error = mps_user_command(sc, (struct mps_usr_command *)arg);
break;
case MPTIOCTL_PASS_THRU:
/*
* The user has requested to pass through a command to be
* executed by the MPT firmware. Call our routine which does
* this. Only allow one passthru IOCTL at one time.
*/
error = mps_user_pass_thru(sc, (mps_pass_thru_t *)arg);
break;
case MPTIOCTL_GET_ADAPTER_DATA:
/*
* The user has requested to read adapter data. Call our
* routine which does this.
*/
error = 0;
mps_user_get_adapter_data(sc, (mps_adapter_data_t *)arg);
break;
case MPTIOCTL_GET_PCI_INFO:
/*
* The user has requested to read pci info. Call
* our routine which does this.
*/
mps_lock(sc);
error = 0;
mps_user_read_pci_info(sc, (mps_pci_info_t *)arg);
mps_unlock(sc);
break;
case MPTIOCTL_RESET_ADAPTER:
mps_lock(sc);
sc->port_enable_complete = 0;
uint32_t reinit_start = time_uptime;
error = mps_reinit(sc);
/* Sleep for 300 second. */
msleep_ret = msleep(&sc->port_enable_complete, &sc->mps_mtx, PRIBIO,
"mps_porten", 300 * hz);
mps_unlock(sc);
if (msleep_ret)
printf("Port Enable did not complete after Diag "
"Reset msleep error %d.\n", msleep_ret);
else
mps_dprint(sc, MPS_USER,
"Hard Reset with Port Enable completed in %d seconds.\n",
(uint32_t) (time_uptime - reinit_start));
break;
case MPTIOCTL_DIAG_ACTION:
/*
* The user has done a diag buffer action. Call our routine
* which does this. Only allow one diag action at one time.
*/
mps_lock(sc);
error = mps_user_diag_action(sc, (mps_diag_action_t *)arg);
mps_unlock(sc);
break;
case MPTIOCTL_EVENT_QUERY:
/*
* The user has done an event query. Call our routine which does
* this.
*/
error = 0;
mps_user_event_query(sc, (mps_event_query_t *)arg);
break;
case MPTIOCTL_EVENT_ENABLE:
/*
* The user has done an event enable. Call our routine which
* does this.
*/
error = 0;
mps_user_event_enable(sc, (mps_event_enable_t *)arg);
break;
case MPTIOCTL_EVENT_REPORT:
/*
* The user has done an event report. Call our routine which
* does this.
*/
error = mps_user_event_report(sc, (mps_event_report_t *)arg);
break;
case MPTIOCTL_REG_ACCESS:
/*
* The user has requested register access. Call our routine
* which does this.
*/
mps_lock(sc);
error = mps_user_reg_access(sc, (mps_reg_access_t *)arg);
mps_unlock(sc);
break;
case MPTIOCTL_BTDH_MAPPING:
/*
* The user has requested to translate a bus/target to a
* DevHandle or a DevHandle to a bus/target. Call our routine
* which does this.
*/
error = mps_user_btdh(sc, (mps_btdh_mapping_t *)arg);
break;
default:
error = ENOIOCTL;
break;
}
if (mps_page != NULL)
free(mps_page, M_MPSUSER);
return (error);
}
#ifdef COMPAT_FREEBSD32
struct mps_cfg_page_req32 {
MPI2_CONFIG_PAGE_HEADER header;
uint32_t page_address;
uint32_t buf;
int len;
uint16_t ioc_status;
};
struct mps_ext_cfg_page_req32 {
MPI2_CONFIG_EXTENDED_PAGE_HEADER header;
uint32_t page_address;
uint32_t buf;
int len;
uint16_t ioc_status;
};
struct mps_raid_action32 {
uint8_t action;
uint8_t volume_bus;
uint8_t volume_id;
uint8_t phys_disk_num;
uint32_t action_data_word;
uint32_t buf;
int len;
uint32_t volume_status;
uint32_t action_data[4];
uint16_t action_status;
uint16_t ioc_status;
uint8_t write;
};
struct mps_usr_command32 {
uint32_t req;
uint32_t req_len;
uint32_t rpl;
uint32_t rpl_len;
uint32_t buf;
int len;
uint32_t flags;
};
#define MPSIO_READ_CFG_HEADER32 _IOWR('M', 200, struct mps_cfg_page_req32)
#define MPSIO_READ_CFG_PAGE32 _IOWR('M', 201, struct mps_cfg_page_req32)
#define MPSIO_READ_EXT_CFG_HEADER32 _IOWR('M', 202, struct mps_ext_cfg_page_req32)
#define MPSIO_READ_EXT_CFG_PAGE32 _IOWR('M', 203, struct mps_ext_cfg_page_req32)
#define MPSIO_WRITE_CFG_PAGE32 _IOWR('M', 204, struct mps_cfg_page_req32)
#define MPSIO_RAID_ACTION32 _IOWR('M', 205, struct mps_raid_action32)
#define MPSIO_MPS_COMMAND32 _IOWR('M', 210, struct mps_usr_command32)
static int
mps_ioctl32(struct cdev *dev, u_long cmd32, void *_arg, int flag,
struct thread *td)
{
struct mps_cfg_page_req32 *page32 = _arg;
struct mps_ext_cfg_page_req32 *ext32 = _arg;
struct mps_raid_action32 *raid32 = _arg;
struct mps_usr_command32 *user32 = _arg;
union {
struct mps_cfg_page_req page;
struct mps_ext_cfg_page_req ext;
struct mps_raid_action raid;
struct mps_usr_command user;
} arg;
u_long cmd;
int error;
switch (cmd32) {
case MPSIO_READ_CFG_HEADER32:
case MPSIO_READ_CFG_PAGE32:
case MPSIO_WRITE_CFG_PAGE32:
if (cmd32 == MPSIO_READ_CFG_HEADER32)
cmd = MPSIO_READ_CFG_HEADER;
else if (cmd32 == MPSIO_READ_CFG_PAGE32)
cmd = MPSIO_READ_CFG_PAGE;
else
cmd = MPSIO_WRITE_CFG_PAGE;
CP(*page32, arg.page, header);
CP(*page32, arg.page, page_address);
PTRIN_CP(*page32, arg.page, buf);
CP(*page32, arg.page, len);
CP(*page32, arg.page, ioc_status);
break;
case MPSIO_READ_EXT_CFG_HEADER32:
case MPSIO_READ_EXT_CFG_PAGE32:
if (cmd32 == MPSIO_READ_EXT_CFG_HEADER32)
cmd = MPSIO_READ_EXT_CFG_HEADER;
else
cmd = MPSIO_READ_EXT_CFG_PAGE;
CP(*ext32, arg.ext, header);
CP(*ext32, arg.ext, page_address);
PTRIN_CP(*ext32, arg.ext, buf);
CP(*ext32, arg.ext, len);
CP(*ext32, arg.ext, ioc_status);
break;
case MPSIO_RAID_ACTION32:
cmd = MPSIO_RAID_ACTION;
CP(*raid32, arg.raid, action);
CP(*raid32, arg.raid, volume_bus);
CP(*raid32, arg.raid, volume_id);
CP(*raid32, arg.raid, phys_disk_num);
CP(*raid32, arg.raid, action_data_word);
PTRIN_CP(*raid32, arg.raid, buf);
CP(*raid32, arg.raid, len);
CP(*raid32, arg.raid, volume_status);
bcopy(raid32->action_data, arg.raid.action_data,
sizeof arg.raid.action_data);
CP(*raid32, arg.raid, ioc_status);
CP(*raid32, arg.raid, write);
break;
case MPSIO_MPS_COMMAND32:
cmd = MPSIO_MPS_COMMAND;
PTRIN_CP(*user32, arg.user, req);
CP(*user32, arg.user, req_len);
PTRIN_CP(*user32, arg.user, rpl);
CP(*user32, arg.user, rpl_len);
PTRIN_CP(*user32, arg.user, buf);
CP(*user32, arg.user, len);
CP(*user32, arg.user, flags);
break;
default:
return (ENOIOCTL);
}
error = mps_ioctl(dev, cmd, &arg, flag, td);
if (error == 0 && (cmd32 & IOC_OUT) != 0) {
switch (cmd32) {
case MPSIO_READ_CFG_HEADER32:
case MPSIO_READ_CFG_PAGE32:
case MPSIO_WRITE_CFG_PAGE32:
CP(arg.page, *page32, header);
CP(arg.page, *page32, page_address);
PTROUT_CP(arg.page, *page32, buf);
CP(arg.page, *page32, len);
CP(arg.page, *page32, ioc_status);
break;
case MPSIO_READ_EXT_CFG_HEADER32:
case MPSIO_READ_EXT_CFG_PAGE32:
CP(arg.ext, *ext32, header);
CP(arg.ext, *ext32, page_address);
PTROUT_CP(arg.ext, *ext32, buf);
CP(arg.ext, *ext32, len);
CP(arg.ext, *ext32, ioc_status);
break;
case MPSIO_RAID_ACTION32:
CP(arg.raid, *raid32, action);
CP(arg.raid, *raid32, volume_bus);
CP(arg.raid, *raid32, volume_id);
CP(arg.raid, *raid32, phys_disk_num);
CP(arg.raid, *raid32, action_data_word);
PTROUT_CP(arg.raid, *raid32, buf);
CP(arg.raid, *raid32, len);
CP(arg.raid, *raid32, volume_status);
bcopy(arg.raid.action_data, raid32->action_data,
sizeof arg.raid.action_data);
CP(arg.raid, *raid32, ioc_status);
CP(arg.raid, *raid32, write);
break;
case MPSIO_MPS_COMMAND32:
PTROUT_CP(arg.user, *user32, req);
CP(arg.user, *user32, req_len);
PTROUT_CP(arg.user, *user32, rpl);
CP(arg.user, *user32, rpl_len);
PTROUT_CP(arg.user, *user32, buf);
CP(arg.user, *user32, len);
CP(arg.user, *user32, flags);
break;
}
}
return (error);
}
#endif /* COMPAT_FREEBSD32 */
static int
mps_ioctl_devsw(struct cdev *dev, u_long com, caddr_t arg, int flag,
struct thread *td)
{
#ifdef COMPAT_FREEBSD32
if (SV_CURPROC_FLAG(SV_ILP32))
return (mps_ioctl32(dev, com, arg, flag, td));
#endif
return (mps_ioctl(dev, com, arg, flag, td));
}
Reference in New Issue View Git Blame Copy Permalink