freebsd-nq/sys/cam/ctl/ctl_ioctl.h
Pedro F. Giffuni bec9534d1d sys/cam: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:12:43 +00:00

844 lines
23 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2003 Silicon Graphics International Corp.
* Copyright (c) 2011 Spectra Logic Corporation
* Copyright (c) 2014-2017 Alexander Motin <mav@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
* $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_ioctl.h#4 $
* $FreeBSD$
*/
/*
* CAM Target Layer ioctl interface.
*
* Author: Ken Merry <ken@FreeBSD.org>
*/
#ifndef _CTL_IOCTL_H_
#define _CTL_IOCTL_H_
#ifdef ICL_KERNEL_PROXY
#include <sys/socket.h>
#endif
#include <sys/ioccom.h>
#define CTL_DEFAULT_DEV "/dev/cam/ctl"
/*
* Maximum number of targets we support.
*/
#define CTL_MAX_TARGETS 1
/*
* Maximum target ID we support.
*/
#define CTL_MAX_TARGID 15
/*
* Maximum number of initiators per port.
*/
#define CTL_MAX_INIT_PER_PORT 2048
/* Hopefully this won't conflict with new misc devices that pop up */
#define CTL_MINOR 225
/* Legacy statistics accumulated for every port for every LU. */
//#define CTL_LEGACY_STATS 1
typedef enum {
CTL_DELAY_TYPE_NONE,
CTL_DELAY_TYPE_CONT,
CTL_DELAY_TYPE_ONESHOT
} ctl_delay_type;
typedef enum {
CTL_DELAY_LOC_NONE,
CTL_DELAY_LOC_DATAMOVE,
CTL_DELAY_LOC_DONE,
} ctl_delay_location;
typedef enum {
CTL_DELAY_STATUS_NONE,
CTL_DELAY_STATUS_OK,
CTL_DELAY_STATUS_INVALID_LUN,
CTL_DELAY_STATUS_INVALID_TYPE,
CTL_DELAY_STATUS_INVALID_LOC,
CTL_DELAY_STATUS_NOT_IMPLEMENTED
} ctl_delay_status;
struct ctl_io_delay_info {
uint32_t lun_id;
ctl_delay_type delay_type;
ctl_delay_location delay_loc;
uint32_t delay_secs;
ctl_delay_status status;
};
typedef enum {
CTL_STATS_NO_IO,
CTL_STATS_READ,
CTL_STATS_WRITE
} ctl_stat_types;
#define CTL_STATS_NUM_TYPES 3
typedef enum {
CTL_SS_OK,
CTL_SS_NEED_MORE_SPACE,
CTL_SS_ERROR
} ctl_stats_status;
typedef enum {
CTL_STATS_FLAG_NONE = 0x00,
CTL_STATS_FLAG_TIME_VALID = 0x01
} ctl_stats_flags;
#ifdef CTL_LEGACY_STATS
typedef enum {
CTL_LUN_STATS_NO_BLOCKSIZE = 0x01
} ctl_lun_stats_flags;
struct ctl_lun_io_port_stats {
uint32_t targ_port;
uint64_t bytes[CTL_STATS_NUM_TYPES];
uint64_t operations[CTL_STATS_NUM_TYPES];
struct bintime time[CTL_STATS_NUM_TYPES];
uint64_t num_dmas[CTL_STATS_NUM_TYPES];
struct bintime dma_time[CTL_STATS_NUM_TYPES];
};
struct ctl_lun_io_stats {
uint8_t device_type;
uint64_t lun_number;
uint32_t blocksize;
ctl_lun_stats_flags flags;
struct ctl_lun_io_port_stats *ports;
};
struct ctl_stats {
int alloc_len; /* passed to kernel */
struct ctl_lun_io_stats *lun_stats; /* passed to/from kernel */
int fill_len; /* passed to userland */
int num_luns; /* passed to userland */
ctl_stats_status status; /* passed to userland */
ctl_stats_flags flags; /* passed to userland */
struct timespec timestamp; /* passed to userland */
};
#endif /* CTL_LEGACY_STATS */
struct ctl_io_stats {
uint32_t item;
uint64_t bytes[CTL_STATS_NUM_TYPES];
uint64_t operations[CTL_STATS_NUM_TYPES];
uint64_t dmas[CTL_STATS_NUM_TYPES];
struct bintime time[CTL_STATS_NUM_TYPES];
struct bintime dma_time[CTL_STATS_NUM_TYPES];
};
struct ctl_get_io_stats {
struct ctl_io_stats *stats; /* passed to/from kernel */
size_t alloc_len; /* passed to kernel */
size_t fill_len; /* passed to userland */
int first_item; /* passed to kernel */
int num_items; /* passed to userland */
ctl_stats_status status; /* passed to userland */
ctl_stats_flags flags; /* passed to userland */
struct timespec timestamp; /* passed to userland */
};
/*
* The types of errors that can be injected:
*
* NONE: No error specified.
* ABORTED: SSD_KEY_ABORTED_COMMAND, 0x45, 0x00
* MEDIUM_ERR: Medium error, different asc/ascq depending on read/write.
* UA: Unit attention.
* CUSTOM: User specifies the sense data.
* TYPE: Mask to use with error types.
*
* Flags that affect injection behavior:
* CONTINUOUS: This error will stay around until explicitly cleared.
* DESCRIPTOR: Use descriptor sense instead of fixed sense.
*/
typedef enum {
CTL_LUN_INJ_NONE = 0x000,
CTL_LUN_INJ_ABORTED = 0x001,
CTL_LUN_INJ_MEDIUM_ERR = 0x002,
CTL_LUN_INJ_UA = 0x003,
CTL_LUN_INJ_CUSTOM = 0x004,
CTL_LUN_INJ_TYPE = 0x0ff,
CTL_LUN_INJ_CONTINUOUS = 0x100,
CTL_LUN_INJ_DESCRIPTOR = 0x200
} ctl_lun_error;
/*
* Flags to specify what type of command the given error pattern will
* execute on. The first group of types can be ORed together.
*
* READ: Any read command.
* WRITE: Any write command.
* READWRITE: Any read or write command.
* READCAP: Any read capacity command.
* TUR: Test Unit Ready.
* ANY: Any command.
* MASK: Mask for basic command patterns.
*
* Special types:
*
* CMD: The CDB to act on is specified in struct ctl_error_desc_cmd.
* RANGE: For read/write commands, act when the LBA is in the
* specified range.
*/
typedef enum {
CTL_LUN_PAT_NONE = 0x000,
CTL_LUN_PAT_READ = 0x001,
CTL_LUN_PAT_WRITE = 0x002,
CTL_LUN_PAT_READWRITE = CTL_LUN_PAT_READ | CTL_LUN_PAT_WRITE,
CTL_LUN_PAT_READCAP = 0x004,
CTL_LUN_PAT_TUR = 0x008,
CTL_LUN_PAT_ANY = 0x0ff,
CTL_LUN_PAT_MASK = 0x0ff,
CTL_LUN_PAT_CMD = 0x100,
CTL_LUN_PAT_RANGE = 0x200
} ctl_lun_error_pattern;
/*
* This structure allows the user to specify a particular CDB pattern to
* look for.
*
* cdb_pattern: Fill in the relevant bytes to look for in the CDB.
* cdb_valid_bytes: Bitmask specifying valid bytes in the cdb_pattern.
* flags: Specify any command flags (see ctl_io_flags) that
* should be set.
*/
struct ctl_error_desc_cmd {
uint8_t cdb_pattern[CTL_MAX_CDBLEN];
uint32_t cdb_valid_bytes;
uint32_t flags;
};
/*
* Error injection descriptor.
*
* lun_id LUN to act on.
* lun_error: The type of error to inject. See above for descriptions.
* error_pattern: What kind of command to act on. See above.
* cmd_desc: For CTL_LUN_PAT_CMD only.
* lba_range: For CTL_LUN_PAT_RANGE only.
* custom_sense: Specify sense. For CTL_LUN_INJ_CUSTOM only.
* serial: Serial number returned by the kernel. Use for deletion.
* links: Kernel use only.
*/
struct ctl_error_desc {
uint32_t lun_id; /* To kernel */
ctl_lun_error lun_error; /* To kernel */
ctl_lun_error_pattern error_pattern; /* To kernel */
struct ctl_error_desc_cmd cmd_desc; /* To kernel */
struct ctl_lba_len lba_range; /* To kernel */
struct scsi_sense_data custom_sense; /* To kernel */
uint64_t serial; /* From kernel */
STAILQ_ENTRY(ctl_error_desc) links; /* Kernel use only */
};
typedef enum {
CTL_OOA_FLAG_NONE = 0x00,
CTL_OOA_FLAG_ALL_LUNS = 0x01
} ctl_ooa_flags;
typedef enum {
CTL_OOA_OK,
CTL_OOA_NEED_MORE_SPACE,
CTL_OOA_ERROR
} ctl_get_ooa_status;
typedef enum {
CTL_OOACMD_FLAG_NONE = 0x00,
CTL_OOACMD_FLAG_DMA = 0x01,
CTL_OOACMD_FLAG_BLOCKED = 0x02,
CTL_OOACMD_FLAG_ABORT = 0x04,
CTL_OOACMD_FLAG_RTR = 0x08,
CTL_OOACMD_FLAG_DMA_QUEUED = 0x10
} ctl_ooa_cmd_flags;
struct ctl_ooa_entry {
ctl_ooa_cmd_flags cmd_flags;
uint8_t cdb[CTL_MAX_CDBLEN];
uint8_t cdb_len;
uint32_t tag_num;
uint32_t lun_num;
struct bintime start_bt;
};
struct ctl_ooa {
ctl_ooa_flags flags; /* passed to kernel */
uint64_t lun_num; /* passed to kernel */
uint32_t alloc_len; /* passed to kernel */
uint32_t alloc_num; /* passed to kernel */
struct ctl_ooa_entry *entries; /* filled in kernel */
uint32_t fill_len; /* passed to userland */
uint32_t fill_num; /* passed to userland */
uint32_t dropped_num; /* passed to userland */
struct bintime cur_bt; /* passed to userland */
ctl_get_ooa_status status; /* passed to userland */
};
typedef enum {
CTL_LUN_NOSTATUS,
CTL_LUN_OK,
CTL_LUN_ERROR,
CTL_LUN_WARNING
} ctl_lun_status;
#define CTL_ERROR_STR_LEN 160
#define CTL_BEARG_RD 0x01
#define CTL_BEARG_WR 0x02
#define CTL_BEARG_RW (CTL_BEARG_RD|CTL_BEARG_WR)
#define CTL_BEARG_ASCII 0x04
/*
* Backend Argument:
*
* namelen: Length of the name field, including the terminating NUL.
*
* name: Name of the parameter. This must be NUL-terminated.
*
* flags: Flags for the parameter, see above for values.
*
* vallen: Length of the value in bytes, including the terminating NUL.
*
* value: Value to be set/fetched. This must be NUL-terminated.
*
* kname: For kernel use only.
*
* kvalue: For kernel use only.
*/
struct ctl_be_arg {
unsigned int namelen;
char *name;
int flags;
unsigned int vallen;
void *value;
char *kname;
void *kvalue;
};
typedef enum {
CTL_LUNREQ_CREATE,
CTL_LUNREQ_RM,
CTL_LUNREQ_MODIFY,
} ctl_lunreq_type;
/*
* The ID_REQ flag is used to say that the caller has requested a
* particular LUN ID in the req_lun_id field. If we cannot allocate that
* LUN ID, the ctl_add_lun() call will fail.
*
* The STOPPED flag tells us that the LUN should default to the powered
* off state. It will return 0x04,0x02 until it is powered up. ("Logical
* unit not ready, initializing command required.")
*
* The NO_MEDIA flag tells us that the LUN has no media inserted.
*
* The PRIMARY flag tells us that this LUN is registered as a Primary LUN
* which is accessible via the Master shelf controller in an HA. This flag
* being set indicates a Primary LUN. This flag being reset represents a
* Secondary LUN controlled by the Secondary controller in an HA
* configuration. Flag is applicable at this time to T_DIRECT types.
*
* The SERIAL_NUM flag tells us that the serial_num field is filled in and
* valid for use in SCSI INQUIRY VPD page 0x80.
*
* The DEVID flag tells us that the device_id field is filled in and
* valid for use in SCSI INQUIRY VPD page 0x83.
*
* The DEV_TYPE flag tells us that the device_type field is filled in.
*
* The EJECTED flag tells us that the removable LUN has tray open.
*
* The UNMAP flag tells us that this LUN supports UNMAP.
*
* The OFFLINE flag tells us that this LUN can not access backing store.
*/
typedef enum {
CTL_LUN_FLAG_ID_REQ = 0x01,
CTL_LUN_FLAG_STOPPED = 0x02,
CTL_LUN_FLAG_NO_MEDIA = 0x04,
CTL_LUN_FLAG_PRIMARY = 0x08,
CTL_LUN_FLAG_SERIAL_NUM = 0x10,
CTL_LUN_FLAG_DEVID = 0x20,
CTL_LUN_FLAG_DEV_TYPE = 0x40,
CTL_LUN_FLAG_UNMAP = 0x80,
CTL_LUN_FLAG_EJECTED = 0x100,
CTL_LUN_FLAG_READONLY = 0x200
} ctl_backend_lun_flags;
/*
* LUN creation parameters:
*
* flags: Various LUN flags, see above.
*
* device_type: The SCSI device type. e.g. 0 for Direct Access,
* 3 for Processor, etc. Only certain backends may
* support setting this field. The CTL_LUN_FLAG_DEV_TYPE
* flag should be set in the flags field if the device
* type is set.
*
* lun_size_bytes: The size of the LUN in bytes. For some backends
* this is relevant (e.g. ramdisk), for others, it may
* be ignored in favor of using the properties of the
* backing store. If specified, this should be a
* multiple of the blocksize.
*
* The actual size of the LUN is returned in this
* field.
*
* blocksize_bytes: The LUN blocksize in bytes. For some backends this
* is relevant, for others it may be ignored in
* favor of using the properties of the backing store.
*
* The actual blocksize of the LUN is returned in this
* field.
*
* req_lun_id: The requested LUN ID. The CTL_LUN_FLAG_ID_REQ flag
* should be set if this is set. The request will be
* granted if the LUN number is available, otherwise
* the LUN addition request will fail.
*
* The allocated LUN number is returned in this field.
*
* serial_num: This is the value returned in SCSI INQUIRY VPD page
* 0x80. If it is specified, the CTL_LUN_FLAG_SERIAL_NUM
* flag should be set.
*
* The serial number value used is returned in this
* field.
*
* device_id: This is the value returned in the T10 vendor ID
* based DESIGNATOR field in the SCSI INQUIRY VPD page
* 0x83 data. If it is specified, the CTL_LUN_FLAG_DEVID
* flag should be set.
*
* The device id value used is returned in this field.
*/
struct ctl_lun_create_params {
ctl_backend_lun_flags flags;
uint8_t device_type;
uint64_t lun_size_bytes;
uint32_t blocksize_bytes;
uint32_t req_lun_id;
uint8_t serial_num[CTL_SN_LEN];
uint8_t device_id[CTL_DEVID_LEN];
};
/*
* LUN removal parameters:
*
* lun_id: The number of the LUN to delete. This must be set.
* The LUN must be backed by the given backend.
*/
struct ctl_lun_rm_params {
uint32_t lun_id;
};
/*
* LUN modification parameters:
*
* lun_id: The number of the LUN to modify. This must be set.
* The LUN must be backed by the given backend.
*
* lun_size_bytes: The size of the LUN in bytes. If zero, update
* the size using the backing file size, if possible.
*/
struct ctl_lun_modify_params {
uint32_t lun_id;
uint64_t lun_size_bytes;
};
/*
* Union of request type data. Fill in the appropriate union member for
* the request type.
*/
union ctl_lunreq_data {
struct ctl_lun_create_params create;
struct ctl_lun_rm_params rm;
struct ctl_lun_modify_params modify;
};
/*
* LUN request interface:
*
* backend: This is required, and is NUL-terminated a string
* that is the name of the backend, like "ramdisk" or
* "block".
*
* reqtype: The type of request, CTL_LUNREQ_CREATE to create a
* LUN, CTL_LUNREQ_RM to delete a LUN.
*
* reqdata: Request type-specific information. See the
* description of individual the union members above
* for more information.
*
* num_be_args: This is the number of backend-specific arguments
* in the be_args array.
*
* be_args: This is an array of backend-specific arguments.
* See above for a description of the fields in this
* structure.
*
* status: Status of the LUN request.
*
* error_str: If the status is CTL_LUN_ERROR, this will
* contain a string describing the error.
*
* kern_be_args: For kernel use only.
*/
struct ctl_lun_req {
#define CTL_BE_NAME_LEN 32
char backend[CTL_BE_NAME_LEN];
ctl_lunreq_type reqtype;
union ctl_lunreq_data reqdata;
int num_be_args;
struct ctl_be_arg *be_args;
ctl_lun_status status;
char error_str[CTL_ERROR_STR_LEN];
struct ctl_be_arg *kern_be_args;
};
/*
* LUN list status:
*
* NONE: No status.
*
* OK: Request completed successfully.
*
* NEED_MORE_SPACE: The allocated length of the entries field is too
* small for the available data.
*
* ERROR: An error occurred, look at the error string for a
* description of the error.
*/
typedef enum {
CTL_LUN_LIST_NONE,
CTL_LUN_LIST_OK,
CTL_LUN_LIST_NEED_MORE_SPACE,
CTL_LUN_LIST_ERROR
} ctl_lun_list_status;
/*
* LUN list interface
*
* backend_name: This is a NUL-terminated string. If the string
* length is 0, then all LUNs on all backends will
* be enumerated. Otherwise this is the name of the
* backend to be enumerated, like "ramdisk" or "block".
*
* alloc_len: The length of the data buffer allocated for entries.
* In order to properly size the buffer, make one call
* with alloc_len set to 0, and then use the returned
* dropped_len as the buffer length to allocate and
* pass in on a subsequent call.
*
* lun_xml: XML-formatted information on the requested LUNs.
*
* fill_len: The amount of data filled in the storage for entries.
*
* status: The status of the request. See above for the
* description of the values of this field.
*
* error_str: If the status indicates an error, this string will
* be filled in to describe the error.
*/
struct ctl_lun_list {
char backend[CTL_BE_NAME_LEN]; /* passed to kernel*/
uint32_t alloc_len; /* passed to kernel */
char *lun_xml; /* filled in kernel */
uint32_t fill_len; /* passed to userland */
ctl_lun_list_status status; /* passed to userland */
char error_str[CTL_ERROR_STR_LEN];
/* passed to userland */
};
/*
* Port request interface:
*
* driver: This is required, and is NUL-terminated a string
* that is the name of the frontend, like "iscsi" .
*
* reqtype: The type of request, CTL_REQ_CREATE to create a
* port, CTL_REQ_REMOVE to delete a port.
*
* num_be_args: This is the number of frontend-specific arguments
* in the be_args array.
*
* be_args: This is an array of frontend-specific arguments.
* See above for a description of the fields in this
* structure.
*
* status: Status of the request.
*
* error_str: If the status is CTL_LUN_ERROR, this will
* contain a string describing the error.
*
* kern_be_args: For kernel use only.
*/
typedef enum {
CTL_REQ_CREATE,
CTL_REQ_REMOVE,
CTL_REQ_MODIFY,
} ctl_req_type;
struct ctl_req {
char driver[CTL_DRIVER_NAME_LEN];
ctl_req_type reqtype;
int num_args;
struct ctl_be_arg *args;
ctl_lun_status status;
char error_str[CTL_ERROR_STR_LEN];
struct ctl_be_arg *kern_args;
};
/*
* iSCSI status
*
* OK: Request completed successfully.
*
* ERROR: An error occurred, look at the error string for a
* description of the error.
*
* CTL_ISCSI_LIST_NEED_MORE_SPACE:
* User has to pass larger buffer for CTL_ISCSI_LIST ioctl.
*/
typedef enum {
CTL_ISCSI_OK,
CTL_ISCSI_ERROR,
CTL_ISCSI_LIST_NEED_MORE_SPACE,
CTL_ISCSI_SESSION_NOT_FOUND
} ctl_iscsi_status;
typedef enum {
CTL_ISCSI_HANDOFF,
CTL_ISCSI_LIST,
CTL_ISCSI_LOGOUT,
CTL_ISCSI_TERMINATE,
CTL_ISCSI_LIMITS,
#if defined(ICL_KERNEL_PROXY) || 1
/*
* We actually need those in all cases, but leave the ICL_KERNEL_PROXY,
* to remember to remove them along with rest of proxy code, eventually.
*/
CTL_ISCSI_LISTEN,
CTL_ISCSI_ACCEPT,
CTL_ISCSI_SEND,
CTL_ISCSI_RECEIVE,
#endif
} ctl_iscsi_type;
typedef enum {
CTL_ISCSI_DIGEST_NONE,
CTL_ISCSI_DIGEST_CRC32C
} ctl_iscsi_digest;
#define CTL_ISCSI_NAME_LEN 224 /* 223 bytes, by RFC 3720, + '\0' */
#define CTL_ISCSI_ADDR_LEN 47 /* INET6_ADDRSTRLEN + '\0' */
#define CTL_ISCSI_ALIAS_LEN 128 /* Arbitrary. */
#define CTL_ISCSI_OFFLOAD_LEN 8 /* Arbitrary. */
struct ctl_iscsi_handoff_params {
char initiator_name[CTL_ISCSI_NAME_LEN];
char initiator_addr[CTL_ISCSI_ADDR_LEN];
char initiator_alias[CTL_ISCSI_ALIAS_LEN];
uint8_t initiator_isid[6];
char target_name[CTL_ISCSI_NAME_LEN];
int socket;
int portal_group_tag;
/*
* Connection parameters negotiated by ctld(8).
*/
ctl_iscsi_digest header_digest;
ctl_iscsi_digest data_digest;
uint32_t cmdsn;
uint32_t statsn;
int max_recv_data_segment_length;
int max_burst_length;
int first_burst_length;
uint32_t immediate_data;
char offload[CTL_ISCSI_OFFLOAD_LEN];
#ifdef ICL_KERNEL_PROXY
int connection_id;
#else
int spare;
#endif
int max_send_data_segment_length;
};
struct ctl_iscsi_list_params {
uint32_t alloc_len; /* passed to kernel */
char *conn_xml; /* filled in kernel */
uint32_t fill_len; /* passed to userland */
int spare[4];
};
struct ctl_iscsi_logout_params {
int connection_id; /* passed to kernel */
char initiator_name[CTL_ISCSI_NAME_LEN];
/* passed to kernel */
char initiator_addr[CTL_ISCSI_ADDR_LEN];
/* passed to kernel */
int all; /* passed to kernel */
int spare[4];
};
struct ctl_iscsi_terminate_params {
int connection_id; /* passed to kernel */
char initiator_name[CTL_ISCSI_NAME_LEN];
/* passed to kernel */
char initiator_addr[CTL_ISCSI_NAME_LEN];
/* passed to kernel */
int all; /* passed to kernel */
int spare[4];
};
struct ctl_iscsi_limits_params {
/* passed to kernel */
char offload[CTL_ISCSI_OFFLOAD_LEN];
/* passed to userland */
size_t spare;
int max_recv_data_segment_length;
int max_send_data_segment_length;
int max_burst_length;
int first_burst_length;
};
#ifdef ICL_KERNEL_PROXY
struct ctl_iscsi_listen_params {
int iser;
int domain;
int socktype;
int protocol;
struct sockaddr *addr;
socklen_t addrlen;
int portal_id;
int spare[4];
};
struct ctl_iscsi_accept_params {
int connection_id;
int portal_id;
struct sockaddr *initiator_addr;
socklen_t initiator_addrlen;
int spare[4];
};
struct ctl_iscsi_send_params {
int connection_id;
void *bhs;
size_t spare;
void *spare2;
size_t data_segment_len;
void *data_segment;
int spare3[4];
};
struct ctl_iscsi_receive_params {
int connection_id;
void *bhs;
size_t spare;
void *spare2;
size_t data_segment_len;
void *data_segment;
int spare3[4];
};
#endif /* ICL_KERNEL_PROXY */
union ctl_iscsi_data {
struct ctl_iscsi_handoff_params handoff;
struct ctl_iscsi_list_params list;
struct ctl_iscsi_logout_params logout;
struct ctl_iscsi_terminate_params terminate;
struct ctl_iscsi_limits_params limits;
#ifdef ICL_KERNEL_PROXY
struct ctl_iscsi_listen_params listen;
struct ctl_iscsi_accept_params accept;
struct ctl_iscsi_send_params send;
struct ctl_iscsi_receive_params receive;
#endif
};
/*
* iSCSI interface
*
* status: The status of the request. See above for the
* description of the values of this field.
*
* error_str: If the status indicates an error, this string will
* be filled in to describe the error.
*/
struct ctl_iscsi {
ctl_iscsi_type type; /* passed to kernel */
union ctl_iscsi_data data; /* passed to kernel */
ctl_iscsi_status status; /* passed to userland */
char error_str[CTL_ERROR_STR_LEN];
/* passed to userland */
};
struct ctl_lun_map {
uint32_t port;
uint32_t plun;
uint32_t lun;
};
#define CTL_IO _IOWR(CTL_MINOR, 0x00, union ctl_io)
#define CTL_ENABLE_PORT _IOW(CTL_MINOR, 0x04, struct ctl_port_entry)
#define CTL_DISABLE_PORT _IOW(CTL_MINOR, 0x05, struct ctl_port_entry)
#define CTL_DELAY_IO _IOWR(CTL_MINOR, 0x10, struct ctl_io_delay_info)
#define CTL_GETSTATS _IOWR(CTL_MINOR, 0x15, struct ctl_stats)
#define CTL_ERROR_INJECT _IOWR(CTL_MINOR, 0x16, struct ctl_error_desc)
#define CTL_GET_OOA _IOWR(CTL_MINOR, 0x18, struct ctl_ooa)
#define CTL_DUMP_STRUCTS _IO(CTL_MINOR, 0x19)
#define CTL_LUN_REQ _IOWR(CTL_MINOR, 0x21, struct ctl_lun_req)
#define CTL_LUN_LIST _IOWR(CTL_MINOR, 0x22, struct ctl_lun_list)
#define CTL_ERROR_INJECT_DELETE _IOW(CTL_MINOR, 0x23, struct ctl_error_desc)
#define CTL_SET_PORT_WWNS _IOW(CTL_MINOR, 0x24, struct ctl_port_entry)
#define CTL_ISCSI _IOWR(CTL_MINOR, 0x25, struct ctl_iscsi)
#define CTL_PORT_REQ _IOWR(CTL_MINOR, 0x26, struct ctl_req)
#define CTL_PORT_LIST _IOWR(CTL_MINOR, 0x27, struct ctl_lun_list)
#define CTL_LUN_MAP _IOW(CTL_MINOR, 0x28, struct ctl_lun_map)
#define CTL_GET_LUN_STATS _IOWR(CTL_MINOR, 0x29, struct ctl_get_io_stats)
#define CTL_GET_PORT_STATS _IOWR(CTL_MINOR, 0x2a, struct ctl_get_io_stats)
#endif /* _CTL_IOCTL_H_ */
/*
* vim: ts=8
*/