d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
99e349db92
freebsd-nq/module/zfs/dmu_objset.c
Matthew Ahrens e8b96c6007 Illumos #4045 write throttle & i/o scheduler performance work 
4045 zfs write throttle & i/o scheduler performance work

1. The ZFS i/o scheduler (vdev_queue.c) now divides i/os into 5 classes: sync
read, sync write, async read, async write, and scrub/resilver.  The scheduler
issues a number of concurrent i/os from each class to the device.  Once a class
has been selected, an i/o is selected from this class using either an elevator
algorithem (async, scrub classes) or FIFO (sync classes).  The number of
concurrent async write i/os is tuned dynamically based on i/o load, to achieve
good sync i/o latency when there is not a high load of writes, and good write
throughput when there is.  See the block comment in vdev_queue.c (reproduced
below) for more details.

2. The write throttle (dsl_pool_tempreserve_space() and
txg_constrain_throughput()) is rewritten to produce much more consistent delays
when under constant load.  The new write throttle is based on the amount of
dirty data, rather than guesses about future performance of the system.  When
there is a lot of dirty data, each transaction (e.g. write() syscall) will be
delayed by the same small amount.  This eliminates the "brick wall of wait"
that the old write throttle could hit, causing all transactions to wait several
seconds until the next txg opens.  One of the keys to the new write throttle is
decrementing the amount of dirty data as i/o completes, rather than at the end
of spa_sync().  Note that the write throttle is only applied once the i/o
scheduler is issuing the maximum number of outstanding async writes.  See the
block comments in dsl_pool.c and above dmu_tx_delay() (reproduced below) for
more details.

This diff has several other effects, including:

 * the commonly-tuned global variable zfs_vdev_max_pending has been removed;
use per-class zfs_vdev_*_max_active values or zfs_vdev_max_active instead.

 * the size of each txg (meaning the amount of dirty data written, and thus the
time it takes to write out) is now controlled differently.  There is no longer
an explicit time goal; the primary determinant is amount of dirty data.
Systems that are under light or medium load will now often see that a txg is
always syncing, but the impact to performance (e.g. read latency) is minimal.
Tune zfs_dirty_data_max and zfs_dirty_data_sync to control this.

 * zio_taskq_batch_pct = 75 -- Only use 75% of all CPUs for compression,
checksum, etc.  This improves latency by not allowing these CPU-intensive tasks
to consume all CPU (on machines with at least 4 CPU's; the percentage is
rounded up).

--matt

APPENDIX: problems with the current i/o scheduler

The current ZFS i/o scheduler (vdev_queue.c) is deadline based.  The problem
with this is that if there are always i/os pending, then certain classes of
i/os can see very long delays.

For example, if there are always synchronous reads outstanding, then no async
writes will be serviced until they become "past due".  One symptom of this
situation is that each pass of the txg sync takes at least several seconds
(typically 3 seconds).

If many i/os become "past due" (their deadline is in the past), then we must
service all of these overdue i/os before any new i/os.  This happens when we
enqueue a batch of async writes for the txg sync, with deadlines 2.5 seconds in
the future.  If we can't complete all the i/os in 2.5 seconds (e.g. because
there were always reads pending), then these i/os will become past due.  Now we
must service all the "async" writes (which could be hundreds of megabytes)
before we service any reads, introducing considerable latency to synchronous
i/os (reads or ZIL writes).

Notes on porting to ZFS on Linux:

- zio_t gained new members io_physdone and io_phys_children.  Because
  object caches in the Linux port call the constructor only once at
  allocation time, objects may contain residual data when retrieved
  from the cache. Therefore zio_create() was updated to zero out the two
  new fields.

- vdev_mirror_pending() relied on the depth of the per-vdev pending queue
  (vq->vq_pending_tree) to select the least-busy leaf vdev to read from.
  This tree has been replaced by vq->vq_active_tree which is now used
  for the same purpose.

- vdev_queue_init() used the value of zfs_vdev_max_pending to determine
  the number of vdev I/O buffers to pre-allocate.  That global no longer
  exists, so we instead use the sum of the *_max_active values for each of
  the five I/O classes described above.

- The Illumos implementation of dmu_tx_delay() delays a transaction by
  sleeping in condition variable embedded in the thread
  (curthread->t_delay_cv).  We do not have an equivalent CV to use in
  Linux, so this change replaced the delay logic with a wrapper called
  zfs_sleep_until(). This wrapper could be adopted upstream and in other
  downstream ports to abstract away operating system-specific delay logic.

- These tunables are added as module parameters, and descriptions added
  to the zfs-module-parameters.5 man page.

  spa_asize_inflation
  zfs_deadman_synctime_ms
  zfs_vdev_max_active
  zfs_vdev_async_write_active_min_dirty_percent
  zfs_vdev_async_write_active_max_dirty_percent
  zfs_vdev_async_read_max_active
  zfs_vdev_async_read_min_active
  zfs_vdev_async_write_max_active
  zfs_vdev_async_write_min_active
  zfs_vdev_scrub_max_active
  zfs_vdev_scrub_min_active
  zfs_vdev_sync_read_max_active
  zfs_vdev_sync_read_min_active
  zfs_vdev_sync_write_max_active
  zfs_vdev_sync_write_min_active
  zfs_dirty_data_max_percent
  zfs_delay_min_dirty_percent
  zfs_dirty_data_max_max_percent
  zfs_dirty_data_max
  zfs_dirty_data_max_max
  zfs_dirty_data_sync
  zfs_delay_scale

  The latter four have type unsigned long, whereas they are uint64_t in
  Illumos.  This accommodates Linux's module_param() supported types, but
  means they may overflow on 32-bit architectures.

  The values zfs_dirty_data_max and zfs_dirty_data_max_max are the most
  likely to overflow on 32-bit systems, since they express physical RAM
  sizes in bytes.  In fact, Illumos initializes zfs_dirty_data_max_max to
  2^32 which does overflow. To resolve that, this port instead initializes
  it in arc_init() to 25% of physical RAM, and adds the tunable
  zfs_dirty_data_max_max_percent to override that percentage.  While this
  solution doesn't completely avoid the overflow issue, it should be a
  reasonable default for most systems, and the minority of affected
  systems can work around the issue by overriding the defaults.

- Fixed reversed logic in comment above zfs_delay_scale declaration.

- Clarified comments in vdev_queue.c regarding when per-queue minimums take
  effect.

- Replaced dmu_tx_write_limit in the dmu_tx kstat file
  with dmu_tx_dirty_delay and dmu_tx_dirty_over_max.  The first counts
  how many times a transaction has been delayed because the pool dirty
  data has exceeded zfs_delay_min_dirty_percent.  The latter counts how
  many times the pool dirty data has exceeded zfs_dirty_data_max (which
  we expect to never happen).

- The original patch would have regressed the bug fixed in
  zfsonlinux/zfs@c418410, which prevented users from setting the
  zfs_vdev_aggregation_limit tuning larger than SPA_MAXBLOCKSIZE.
  A similar fix is added to vdev_queue_aggregate().

- In vdev_queue_io_to_issue(), dynamically allocate 'zio_t search' on the
  heap instead of the stack.  In Linux we can't afford such large
  structures on the stack.

Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Adam Leventhal <ahl@delphix.com>
Reviewed by: Christopher Siden <christopher.siden@delphix.com>
Reviewed by: Ned Bass <bass6@llnl.gov>
Reviewed by: Brendan Gregg <brendan.gregg@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>

References:
  http://www.illumos.org/issues/4045
  illumos/illumos-gate@69962b5647

Ported-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #1913
2013-12-06 09:32:43 -08:00

1824 lines
44 KiB
C
Raw Blame History

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2013 by Delphix. All rights reserved.
* Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
*/
/* Portions Copyright 2010 Robert Milkowski */
#include <sys/cred.h>
#include <sys/zfs_context.h>
#include <sys/dmu_objset.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_prop.h>
#include <sys/dsl_pool.h>
#include <sys/dsl_synctask.h>
#include <sys/dsl_deleg.h>
#include <sys/dnode.h>
#include <sys/dbuf.h>
#include <sys/zvol.h>
#include <sys/dmu_tx.h>
#include <sys/zap.h>
#include <sys/zil.h>
#include <sys/dmu_impl.h>
#include <sys/zfs_ioctl.h>
#include <sys/sa.h>
#include <sys/zfs_onexit.h>
#include <sys/dsl_destroy.h>
/*
* Needed to close a window in dnode_move() that allows the objset to be freed
* before it can be safely accessed.
*/
krwlock_t os_lock;
void
dmu_objset_init(void)
{
rw_init(&os_lock, NULL, RW_DEFAULT, NULL);
}
void
dmu_objset_fini(void)
{
rw_destroy(&os_lock);
}
spa_t *
dmu_objset_spa(objset_t *os)
{
return (os->os_spa);
}
zilog_t *
dmu_objset_zil(objset_t *os)
{
return (os->os_zil);
}
dsl_pool_t *
dmu_objset_pool(objset_t *os)
{
dsl_dataset_t *ds;
if ((ds = os->os_dsl_dataset) != NULL && ds->ds_dir)
return (ds->ds_dir->dd_pool);
else
return (spa_get_dsl(os->os_spa));
}
dsl_dataset_t *
dmu_objset_ds(objset_t *os)
{
return (os->os_dsl_dataset);
}
dmu_objset_type_t
dmu_objset_type(objset_t *os)
{
return (os->os_phys->os_type);
}
void
dmu_objset_name(objset_t *os, char *buf)
{
dsl_dataset_name(os->os_dsl_dataset, buf);
}
uint64_t
dmu_objset_id(objset_t *os)
{
dsl_dataset_t *ds = os->os_dsl_dataset;
return (ds ? ds->ds_object : 0);
}
uint64_t
dmu_objset_syncprop(objset_t *os)
{
return (os->os_sync);
}
uint64_t
dmu_objset_logbias(objset_t *os)
{
return (os->os_logbias);
}
static void
checksum_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
/*
* Inheritance should have been done by now.
*/
ASSERT(newval != ZIO_CHECKSUM_INHERIT);
os->os_checksum = zio_checksum_select(newval, ZIO_CHECKSUM_ON_VALUE);
}
static void
compression_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
/*
* Inheritance and range checking should have been done by now.
*/
ASSERT(newval != ZIO_COMPRESS_INHERIT);
os->os_compress = zio_compress_select(newval, ZIO_COMPRESS_ON_VALUE);
}
static void
copies_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
/*
* Inheritance and range checking should have been done by now.
*/
ASSERT(newval > 0);
ASSERT(newval <= spa_max_replication(os->os_spa));
os->os_copies = newval;
}
static void
dedup_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
spa_t *spa = os->os_spa;
enum zio_checksum checksum;
/*
* Inheritance should have been done by now.
*/
ASSERT(newval != ZIO_CHECKSUM_INHERIT);
checksum = zio_checksum_dedup_select(spa, newval, ZIO_CHECKSUM_OFF);
os->os_dedup_checksum = checksum & ZIO_CHECKSUM_MASK;
os->os_dedup_verify = !!(checksum & ZIO_CHECKSUM_VERIFY);
}
static void
primary_cache_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
/*
* Inheritance and range checking should have been done by now.
*/
ASSERT(newval == ZFS_CACHE_ALL || newval == ZFS_CACHE_NONE ||
newval == ZFS_CACHE_METADATA);
os->os_primary_cache = newval;
}
static void
secondary_cache_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
/*
* Inheritance and range checking should have been done by now.
*/
ASSERT(newval == ZFS_CACHE_ALL || newval == ZFS_CACHE_NONE ||
newval == ZFS_CACHE_METADATA);
os->os_secondary_cache = newval;
}
static void
sync_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
/*
* Inheritance and range checking should have been done by now.
*/
ASSERT(newval == ZFS_SYNC_STANDARD || newval == ZFS_SYNC_ALWAYS ||
newval == ZFS_SYNC_DISABLED);
os->os_sync = newval;
if (os->os_zil)
zil_set_sync(os->os_zil, newval);
}
static void
logbias_changed_cb(void *arg, uint64_t newval)
{
objset_t *os = arg;
ASSERT(newval == ZFS_LOGBIAS_LATENCY ||
newval == ZFS_LOGBIAS_THROUGHPUT);
os->os_logbias = newval;
if (os->os_zil)
zil_set_logbias(os->os_zil, newval);
}
void
dmu_objset_byteswap(void *buf, size_t size)
{
objset_phys_t *osp = buf;
ASSERT(size == OBJSET_OLD_PHYS_SIZE || size == sizeof (objset_phys_t));
dnode_byteswap(&osp->os_meta_dnode);
byteswap_uint64_array(&osp->os_zil_header, sizeof (zil_header_t));
osp->os_type = BSWAP_64(osp->os_type);
osp->os_flags = BSWAP_64(osp->os_flags);
if (size == sizeof (objset_phys_t)) {
dnode_byteswap(&osp->os_userused_dnode);
dnode_byteswap(&osp->os_groupused_dnode);
}
}
int
dmu_objset_open_impl(spa_t *spa, dsl_dataset_t *ds, blkptr_t *bp,
objset_t **osp)
{
objset_t *os;
int i, err;
ASSERT(ds == NULL || MUTEX_HELD(&ds->ds_opening_lock));
os = kmem_zalloc(sizeof (objset_t), KM_PUSHPAGE);
os->os_dsl_dataset = ds;
os->os_spa = spa;
os->os_rootbp = bp;
if (!BP_IS_HOLE(os->os_rootbp)) {
uint32_t aflags = ARC_WAIT;
zbookmark_t zb;
SET_BOOKMARK(&zb, ds ? ds->ds_object : DMU_META_OBJSET,
ZB_ROOT_OBJECT, ZB_ROOT_LEVEL, ZB_ROOT_BLKID);
if (DMU_OS_IS_L2CACHEABLE(os))
aflags |= ARC_L2CACHE;
if (DMU_OS_IS_L2COMPRESSIBLE(os))
aflags |= ARC_L2COMPRESS;
dprintf_bp(os->os_rootbp, "reading %s", "");
err = arc_read(NULL, spa, os->os_rootbp,
arc_getbuf_func, &os->os_phys_buf,
ZIO_PRIORITY_SYNC_READ, ZIO_FLAG_CANFAIL, &aflags, &zb);
if (err != 0) {
kmem_free(os, sizeof (objset_t));
/* convert checksum errors into IO errors */
if (err == ECKSUM)
err = SET_ERROR(EIO);
return (err);
}
/* Increase the blocksize if we are permitted. */
if (spa_version(spa) >= SPA_VERSION_USERSPACE &&
arc_buf_size(os->os_phys_buf) < sizeof (objset_phys_t)) {
arc_buf_t *buf = arc_buf_alloc(spa,
sizeof (objset_phys_t), &os->os_phys_buf,
ARC_BUFC_METADATA);
bzero(buf->b_data, sizeof (objset_phys_t));
bcopy(os->os_phys_buf->b_data, buf->b_data,
arc_buf_size(os->os_phys_buf));
(void) arc_buf_remove_ref(os->os_phys_buf,
&os->os_phys_buf);
os->os_phys_buf = buf;
}
os->os_phys = os->os_phys_buf->b_data;
os->os_flags = os->os_phys->os_flags;
} else {
int size = spa_version(spa) >= SPA_VERSION_USERSPACE ?
sizeof (objset_phys_t) : OBJSET_OLD_PHYS_SIZE;
os->os_phys_buf = arc_buf_alloc(spa, size,
&os->os_phys_buf, ARC_BUFC_METADATA);
os->os_phys = os->os_phys_buf->b_data;
bzero(os->os_phys, size);
}
/*
* Note: the changed_cb will be called once before the register
* func returns, thus changing the checksum/compression from the
* default (fletcher2/off). Snapshots don't need to know about
* checksum/compression/copies.
*/
if (ds) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_PRIMARYCACHE),
primary_cache_changed_cb, os);
if (err == 0) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_SECONDARYCACHE),
secondary_cache_changed_cb, os);
}
if (!dsl_dataset_is_snapshot(ds)) {
if (err == 0) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_CHECKSUM),
checksum_changed_cb, os);
}
if (err == 0) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_COMPRESSION),
compression_changed_cb, os);
}
if (err == 0) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_COPIES),
copies_changed_cb, os);
}
if (err == 0) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_DEDUP),
dedup_changed_cb, os);
}
if (err == 0) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_LOGBIAS),
logbias_changed_cb, os);
}
if (err == 0) {
err = dsl_prop_register(ds,
zfs_prop_to_name(ZFS_PROP_SYNC),
sync_changed_cb, os);
}
}
if (err != 0) {
VERIFY(arc_buf_remove_ref(os->os_phys_buf,
&os->os_phys_buf));
kmem_free(os, sizeof (objset_t));
return (err);
}
} else if (ds == NULL) {
/* It's the meta-objset. */
os->os_checksum = ZIO_CHECKSUM_FLETCHER_4;
os->os_compress = ZIO_COMPRESS_LZJB;
os->os_copies = spa_max_replication(spa);
os->os_dedup_checksum = ZIO_CHECKSUM_OFF;
os->os_dedup_verify = 0;
os->os_logbias = 0;
os->os_sync = 0;
os->os_primary_cache = ZFS_CACHE_ALL;
os->os_secondary_cache = ZFS_CACHE_ALL;
}
if (ds == NULL || !dsl_dataset_is_snapshot(ds))
os->os_zil_header = os->os_phys->os_zil_header;
os->os_zil = zil_alloc(os, &os->os_zil_header);
for (i = 0; i < TXG_SIZE; i++) {
list_create(&os->os_dirty_dnodes[i], sizeof (dnode_t),
offsetof(dnode_t, dn_dirty_link[i]));
list_create(&os->os_free_dnodes[i], sizeof (dnode_t),
offsetof(dnode_t, dn_dirty_link[i]));
}
list_create(&os->os_dnodes, sizeof (dnode_t),
offsetof(dnode_t, dn_link));
list_create(&os->os_downgraded_dbufs, sizeof (dmu_buf_impl_t),
offsetof(dmu_buf_impl_t, db_link));
mutex_init(&os->os_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&os->os_obj_lock, NULL, MUTEX_DEFAULT, NULL);
mutex_init(&os->os_user_ptr_lock, NULL, MUTEX_DEFAULT, NULL);
DMU_META_DNODE(os) = dnode_special_open(os,
&os->os_phys->os_meta_dnode, DMU_META_DNODE_OBJECT,
&os->os_meta_dnode);
if (arc_buf_size(os->os_phys_buf) >= sizeof (objset_phys_t)) {
DMU_USERUSED_DNODE(os) = dnode_special_open(os,
&os->os_phys->os_userused_dnode, DMU_USERUSED_OBJECT,
&os->os_userused_dnode);
DMU_GROUPUSED_DNODE(os) = dnode_special_open(os,
&os->os_phys->os_groupused_dnode, DMU_GROUPUSED_OBJECT,
&os->os_groupused_dnode);
}
/*
* We should be the only thread trying to do this because we
* have ds_opening_lock
*/
if (ds) {
mutex_enter(&ds->ds_lock);
ASSERT(ds->ds_objset == NULL);
ds->ds_objset = os;
mutex_exit(&ds->ds_lock);
}
*osp = os;
return (0);
}
int
dmu_objset_from_ds(dsl_dataset_t *ds, objset_t **osp)
{
int err = 0;
mutex_enter(&ds->ds_opening_lock);
*osp = ds->ds_objset;
if (*osp == NULL) {
err = dmu_objset_open_impl(dsl_dataset_get_spa(ds),
ds, dsl_dataset_get_blkptr(ds), osp);
}
mutex_exit(&ds->ds_opening_lock);
return (err);
}
/*
* Holds the pool while the objset is held. Therefore only one objset
* can be held at a time.
*/
int
dmu_objset_hold(const char *name, void *tag, objset_t **osp)
{
dsl_pool_t *dp;
dsl_dataset_t *ds;
int err;
err = dsl_pool_hold(name, tag, &dp);
if (err != 0)
return (err);
err = dsl_dataset_hold(dp, name, tag, &ds);
if (err != 0) {
dsl_pool_rele(dp, tag);
return (err);
}
err = dmu_objset_from_ds(ds, osp);
if (err != 0) {
dsl_dataset_rele(ds, tag);
dsl_pool_rele(dp, tag);
}
return (err);
}
/*
* dsl_pool must not be held when this is called.
* Upon successful return, there will be a longhold on the dataset,
* and the dsl_pool will not be held.
*/
int
dmu_objset_own(const char *name, dmu_objset_type_t type,
boolean_t readonly, void *tag, objset_t **osp)
{
dsl_pool_t *dp;
dsl_dataset_t *ds;
int err;
err = dsl_pool_hold(name, FTAG, &dp);
if (err != 0)
return (err);
err = dsl_dataset_own(dp, name, tag, &ds);
if (err != 0) {
dsl_pool_rele(dp, FTAG);
return (err);
}
err = dmu_objset_from_ds(ds, osp);
dsl_pool_rele(dp, FTAG);
if (err != 0) {
dsl_dataset_disown(ds, tag);
} else if (type != DMU_OST_ANY && type != (*osp)->os_phys->os_type) {
dsl_dataset_disown(ds, tag);
return (SET_ERROR(EINVAL));
} else if (!readonly && dsl_dataset_is_snapshot(ds)) {
dsl_dataset_disown(ds, tag);
return (SET_ERROR(EROFS));
}
return (err);
}
void
dmu_objset_rele(objset_t *os, void *tag)
{
dsl_pool_t *dp = dmu_objset_pool(os);
dsl_dataset_rele(os->os_dsl_dataset, tag);
dsl_pool_rele(dp, tag);
}
/*
* When we are called, os MUST refer to an objset associated with a dataset
* that is owned by 'tag'; that is, is held and long held by 'tag' and ds_owner
* == tag. We will then release and reacquire ownership of the dataset while
* holding the pool config_rwlock to avoid intervening namespace or ownership
* changes may occur.
*
* This exists solely to accommodate zfs_ioc_userspace_upgrade()'s desire to
* release the hold on its dataset and acquire a new one on the dataset of the
* same name so that it can be partially torn down and reconstructed.
*/
void
dmu_objset_refresh_ownership(objset_t *os, void *tag)
{
dsl_pool_t *dp;
dsl_dataset_t *ds, *newds;
char name[MAXNAMELEN];
ds = os->os_dsl_dataset;
VERIFY3P(ds, !=, NULL);
VERIFY3P(ds->ds_owner, ==, tag);
VERIFY(dsl_dataset_long_held(ds));
dsl_dataset_name(ds, name);
dp = dmu_objset_pool(os);
dsl_pool_config_enter(dp, FTAG);
dmu_objset_disown(os, tag);
VERIFY0(dsl_dataset_own(dp, name, tag, &newds));
VERIFY3P(newds, ==, os->os_dsl_dataset);
dsl_pool_config_exit(dp, FTAG);
}
void
dmu_objset_disown(objset_t *os, void *tag)
{
dsl_dataset_disown(os->os_dsl_dataset, tag);
}
void
dmu_objset_evict_dbufs(objset_t *os)
{
dnode_t *dn;
mutex_enter(&os->os_lock);
/* process the mdn last, since the other dnodes have holds on it */
list_remove(&os->os_dnodes, DMU_META_DNODE(os));
list_insert_tail(&os->os_dnodes, DMU_META_DNODE(os));
/*
* Find the first dnode with holds. We have to do this dance
* because dnode_add_ref() only works if you already have a
* hold. If there are no holds then it has no dbufs so OK to
* skip.
*/
for (dn = list_head(&os->os_dnodes);
dn && !dnode_add_ref(dn, FTAG);
dn = list_next(&os->os_dnodes, dn))
continue;
while (dn) {
dnode_t *next_dn = dn;
do {
next_dn = list_next(&os->os_dnodes, next_dn);
} while (next_dn && !dnode_add_ref(next_dn, FTAG));
mutex_exit(&os->os_lock);
dnode_evict_dbufs(dn);
dnode_rele(dn, FTAG);
mutex_enter(&os->os_lock);
dn = next_dn;
}
mutex_exit(&os->os_lock);
}
void
dmu_objset_evict(objset_t *os)
{
int t;
dsl_dataset_t *ds = os->os_dsl_dataset;
for (t = 0; t < TXG_SIZE; t++)
ASSERT(!dmu_objset_is_dirty(os, t));
if (ds) {
if (!dsl_dataset_is_snapshot(ds)) {
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_CHECKSUM),
checksum_changed_cb, os));
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_COMPRESSION),
compression_changed_cb, os));
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_COPIES),
copies_changed_cb, os));
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_DEDUP),
dedup_changed_cb, os));
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_LOGBIAS),
logbias_changed_cb, os));
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_SYNC),
sync_changed_cb, os));
}
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_PRIMARYCACHE),
primary_cache_changed_cb, os));
VERIFY0(dsl_prop_unregister(ds,
zfs_prop_to_name(ZFS_PROP_SECONDARYCACHE),
secondary_cache_changed_cb, os));
}
if (os->os_sa)
sa_tear_down(os);
dmu_objset_evict_dbufs(os);
dnode_special_close(&os->os_meta_dnode);
if (DMU_USERUSED_DNODE(os)) {
dnode_special_close(&os->os_userused_dnode);
dnode_special_close(&os->os_groupused_dnode);
}
zil_free(os->os_zil);
ASSERT3P(list_head(&os->os_dnodes), ==, NULL);
VERIFY(arc_buf_remove_ref(os->os_phys_buf, &os->os_phys_buf));
/*
* This is a barrier to prevent the objset from going away in
* dnode_move() until we can safely ensure that the objset is still in
* use. We consider the objset valid before the barrier and invalid
* after the barrier.
*/
rw_enter(&os_lock, RW_READER);
rw_exit(&os_lock);
mutex_destroy(&os->os_lock);
mutex_destroy(&os->os_obj_lock);
mutex_destroy(&os->os_user_ptr_lock);
kmem_free(os, sizeof (objset_t));
}
timestruc_t
dmu_objset_snap_cmtime(objset_t *os)
{
return (dsl_dir_snap_cmtime(os->os_dsl_dataset->ds_dir));
}
/* called from dsl for meta-objset */
objset_t *
dmu_objset_create_impl(spa_t *spa, dsl_dataset_t *ds, blkptr_t *bp,
dmu_objset_type_t type, dmu_tx_t *tx)
{
objset_t *os;
dnode_t *mdn;
ASSERT(dmu_tx_is_syncing(tx));
if (ds != NULL)
VERIFY0(dmu_objset_from_ds(ds, &os));
else
VERIFY0(dmu_objset_open_impl(spa, NULL, bp, &os));
mdn = DMU_META_DNODE(os);
dnode_allocate(mdn, DMU_OT_DNODE, 1 << DNODE_BLOCK_SHIFT,
DN_MAX_INDBLKSHIFT, DMU_OT_NONE, 0, tx);
/*
* We don't want to have to increase the meta-dnode's nlevels
* later, because then we could do it in quescing context while
* we are also accessing it in open context.
*
* This precaution is not necessary for the MOS (ds == NULL),
* because the MOS is only updated in syncing context.
* This is most fortunate: the MOS is the only objset that
* needs to be synced multiple times as spa_sync() iterates
* to convergence, so minimizing its dn_nlevels matters.
*/
if (ds != NULL) {
int levels = 1;
/*
* Determine the number of levels necessary for the meta-dnode
* to contain DN_MAX_OBJECT dnodes.
*/
while ((uint64_t)mdn->dn_nblkptr << (mdn->dn_datablkshift +
(levels - 1) * (mdn->dn_indblkshift - SPA_BLKPTRSHIFT)) <
DN_MAX_OBJECT * sizeof (dnode_phys_t))
levels++;
mdn->dn_next_nlevels[tx->tx_txg & TXG_MASK] =
mdn->dn_nlevels = levels;
}
ASSERT(type != DMU_OST_NONE);
ASSERT(type != DMU_OST_ANY);
ASSERT(type < DMU_OST_NUMTYPES);
os->os_phys->os_type = type;
if (dmu_objset_userused_enabled(os)) {
os->os_phys->os_flags |= OBJSET_FLAG_USERACCOUNTING_COMPLETE;
os->os_flags = os->os_phys->os_flags;
}
dsl_dataset_dirty(ds, tx);
return (os);
}
typedef struct dmu_objset_create_arg {
const char *doca_name;
cred_t *doca_cred;
void (*doca_userfunc)(objset_t *os, void *arg,
cred_t *cr, dmu_tx_t *tx);
void *doca_userarg;
dmu_objset_type_t doca_type;
uint64_t doca_flags;
} dmu_objset_create_arg_t;
/*ARGSUSED*/
static int
dmu_objset_create_check(void *arg, dmu_tx_t *tx)
{
dmu_objset_create_arg_t *doca = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_dir_t *pdd;
const char *tail;
int error;
if (strchr(doca->doca_name, '@') != NULL)
return (SET_ERROR(EINVAL));
error = dsl_dir_hold(dp, doca->doca_name, FTAG, &pdd, &tail);
if (error != 0)
return (error);
if (tail == NULL) {
dsl_dir_rele(pdd, FTAG);
return (SET_ERROR(EEXIST));
}
dsl_dir_rele(pdd, FTAG);
return (0);
}
static void
dmu_objset_create_sync(void *arg, dmu_tx_t *tx)
{
dmu_objset_create_arg_t *doca = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_dir_t *pdd;
const char *tail;
dsl_dataset_t *ds;
uint64_t obj;
blkptr_t *bp;
objset_t *os;
VERIFY0(dsl_dir_hold(dp, doca->doca_name, FTAG, &pdd, &tail));
obj = dsl_dataset_create_sync(pdd, tail, NULL, doca->doca_flags,
doca->doca_cred, tx);
VERIFY0(dsl_dataset_hold_obj(pdd->dd_pool, obj, FTAG, &ds));
bp = dsl_dataset_get_blkptr(ds);
os = dmu_objset_create_impl(pdd->dd_pool->dp_spa,
ds, bp, doca->doca_type, tx);
if (doca->doca_userfunc != NULL) {
doca->doca_userfunc(os, doca->doca_userarg,
doca->doca_cred, tx);
}
spa_history_log_internal_ds(ds, "create", tx, "");
dsl_dataset_rele(ds, FTAG);
dsl_dir_rele(pdd, FTAG);
}
int
dmu_objset_create(const char *name, dmu_objset_type_t type, uint64_t flags,
void (*func)(objset_t *os, void *arg, cred_t *cr, dmu_tx_t *tx), void *arg)
{
dmu_objset_create_arg_t doca;
doca.doca_name = name;
doca.doca_cred = CRED();
doca.doca_flags = flags;
doca.doca_userfunc = func;
doca.doca_userarg = arg;
doca.doca_type = type;
return (dsl_sync_task(name,
dmu_objset_create_check, dmu_objset_create_sync, &doca, 5));
}
typedef struct dmu_objset_clone_arg {
const char *doca_clone;
const char *doca_origin;
cred_t *doca_cred;
} dmu_objset_clone_arg_t;
/*ARGSUSED*/
static int
dmu_objset_clone_check(void *arg, dmu_tx_t *tx)
{
dmu_objset_clone_arg_t *doca = arg;
dsl_dir_t *pdd;
const char *tail;
int error;
dsl_dataset_t *origin;
dsl_pool_t *dp = dmu_tx_pool(tx);
if (strchr(doca->doca_clone, '@') != NULL)
return (SET_ERROR(EINVAL));
error = dsl_dir_hold(dp, doca->doca_clone, FTAG, &pdd, &tail);
if (error != 0)
return (error);
if (tail == NULL) {
dsl_dir_rele(pdd, FTAG);
return (SET_ERROR(EEXIST));
}
/* You can't clone across pools. */
if (pdd->dd_pool != dp) {
dsl_dir_rele(pdd, FTAG);
return (SET_ERROR(EXDEV));
}
dsl_dir_rele(pdd, FTAG);
error = dsl_dataset_hold(dp, doca->doca_origin, FTAG, &origin);
if (error != 0)
return (error);
/* You can't clone across pools. */
if (origin->ds_dir->dd_pool != dp) {
dsl_dataset_rele(origin, FTAG);
return (SET_ERROR(EXDEV));
}
/* You can only clone snapshots, not the head datasets. */
if (!dsl_dataset_is_snapshot(origin)) {
dsl_dataset_rele(origin, FTAG);
return (SET_ERROR(EINVAL));
}
dsl_dataset_rele(origin, FTAG);
return (0);
}
static void
dmu_objset_clone_sync(void *arg, dmu_tx_t *tx)
{
dmu_objset_clone_arg_t *doca = arg;
dsl_pool_t *dp = dmu_tx_pool(tx);
dsl_dir_t *pdd;
const char *tail;
dsl_dataset_t *origin, *ds;
uint64_t obj;
char namebuf[MAXNAMELEN];
VERIFY0(dsl_dir_hold(dp, doca->doca_clone, FTAG, &pdd, &tail));
VERIFY0(dsl_dataset_hold(dp, doca->doca_origin, FTAG, &origin));
obj = dsl_dataset_create_sync(pdd, tail, origin, 0,
doca->doca_cred, tx);
VERIFY0(dsl_dataset_hold_obj(pdd->dd_pool, obj, FTAG, &ds));
dsl_dataset_name(origin, namebuf);
spa_history_log_internal_ds(ds, "clone", tx,
"origin=%s (%llu)", namebuf, origin->ds_object);
dsl_dataset_rele(ds, FTAG);
dsl_dataset_rele(origin, FTAG);
dsl_dir_rele(pdd, FTAG);
}
int
dmu_objset_clone(const char *clone, const char *origin)
{
dmu_objset_clone_arg_t doca;
doca.doca_clone = clone;
doca.doca_origin = origin;
doca.doca_cred = CRED();
return (dsl_sync_task(clone,
dmu_objset_clone_check, dmu_objset_clone_sync, &doca, 5));
}
int
dmu_objset_snapshot_one(const char *fsname, const char *snapname)
{
int err;
char *longsnap = kmem_asprintf("%s@%s", fsname, snapname);
nvlist_t *snaps = fnvlist_alloc();
fnvlist_add_boolean(snaps, longsnap);
strfree(longsnap);
err = dsl_dataset_snapshot(snaps, NULL, NULL);
fnvlist_free(snaps);
return (err);
}
static void
dmu_objset_sync_dnodes(list_t *list, list_t *newlist, dmu_tx_t *tx)
{
dnode_t *dn;
while ((dn = list_head(list))) {
ASSERT(dn->dn_object != DMU_META_DNODE_OBJECT);
ASSERT(dn->dn_dbuf->db_data_pending);
/*
* Initialize dn_zio outside dnode_sync() because the
* meta-dnode needs to set it ouside dnode_sync().
*/
dn->dn_zio = dn->dn_dbuf->db_data_pending->dr_zio;
ASSERT(dn->dn_zio);
ASSERT3U(dn->dn_nlevels, <=, DN_MAX_LEVELS);
list_remove(list, dn);
if (newlist) {
(void) dnode_add_ref(dn, newlist);
list_insert_tail(newlist, dn);
}
dnode_sync(dn, tx);
}
}
/* ARGSUSED */
static void
dmu_objset_write_ready(zio_t *zio, arc_buf_t *abuf, void *arg)
{
int i;
blkptr_t *bp = zio->io_bp;
objset_t *os = arg;
dnode_phys_t *dnp = &os->os_phys->os_meta_dnode;
ASSERT3P(bp, ==, os->os_rootbp);
ASSERT3U(BP_GET_TYPE(bp), ==, DMU_OT_OBJSET);
ASSERT0(BP_GET_LEVEL(bp));
/*
* Update rootbp fill count: it should be the number of objects
* allocated in the object set (not counting the "special"
* objects that are stored in the objset_phys_t -- the meta
* dnode and user/group accounting objects).
*/
bp->blk_fill = 0;
for (i = 0; i < dnp->dn_nblkptr; i++)
bp->blk_fill += dnp->dn_blkptr[i].blk_fill;
}
/* ARGSUSED */
static void
dmu_objset_write_done(zio_t *zio, arc_buf_t *abuf, void *arg)
{
blkptr_t *bp = zio->io_bp;
blkptr_t *bp_orig = &zio->io_bp_orig;
objset_t *os = arg;
if (zio->io_flags & ZIO_FLAG_IO_REWRITE) {
ASSERT(BP_EQUAL(bp, bp_orig));
} else {
dsl_dataset_t *ds = os->os_dsl_dataset;
dmu_tx_t *tx = os->os_synctx;
(void) dsl_dataset_block_kill(ds, bp_orig, tx, B_TRUE);
dsl_dataset_block_born(ds, bp, tx);
}
}
/* called from dsl */
void
dmu_objset_sync(objset_t *os, zio_t *pio, dmu_tx_t *tx)
{
int txgoff;
zbookmark_t zb;
zio_prop_t zp;
zio_t *zio;
list_t *list;
list_t *newlist = NULL;
dbuf_dirty_record_t *dr;
dprintf_ds(os->os_dsl_dataset, "txg=%llu\n", tx->tx_txg);
ASSERT(dmu_tx_is_syncing(tx));
/* XXX the write_done callback should really give us the tx... */
os->os_synctx = tx;
if (os->os_dsl_dataset == NULL) {
/*
* This is the MOS. If we have upgraded,
* spa_max_replication() could change, so reset
* os_copies here.
*/
os->os_copies = spa_max_replication(os->os_spa);
}
/*
* Create the root block IO
*/
SET_BOOKMARK(&zb, os->os_dsl_dataset ?
os->os_dsl_dataset->ds_object : DMU_META_OBJSET,
ZB_ROOT_OBJECT, ZB_ROOT_LEVEL, ZB_ROOT_BLKID);
arc_release(os->os_phys_buf, &os->os_phys_buf);
dmu_write_policy(os, NULL, 0, 0, &zp);
zio = arc_write(pio, os->os_spa, tx->tx_txg,
os->os_rootbp, os->os_phys_buf, DMU_OS_IS_L2CACHEABLE(os),
DMU_OS_IS_L2COMPRESSIBLE(os), &zp, dmu_objset_write_ready,
NULL, dmu_objset_write_done, os, ZIO_PRIORITY_ASYNC_WRITE,
ZIO_FLAG_MUSTSUCCEED, &zb);
/*
* Sync special dnodes - the parent IO for the sync is the root block
*/
DMU_META_DNODE(os)->dn_zio = zio;
dnode_sync(DMU_META_DNODE(os), tx);
os->os_phys->os_flags = os->os_flags;
if (DMU_USERUSED_DNODE(os) &&
DMU_USERUSED_DNODE(os)->dn_type != DMU_OT_NONE) {
DMU_USERUSED_DNODE(os)->dn_zio = zio;
dnode_sync(DMU_USERUSED_DNODE(os), tx);
DMU_GROUPUSED_DNODE(os)->dn_zio = zio;
dnode_sync(DMU_GROUPUSED_DNODE(os), tx);
}
txgoff = tx->tx_txg & TXG_MASK;
if (dmu_objset_userused_enabled(os)) {
newlist = &os->os_synced_dnodes;
/*
* We must create the list here because it uses the
* dn_dirty_link[] of this txg.
*/
list_create(newlist, sizeof (dnode_t),
offsetof(dnode_t, dn_dirty_link[txgoff]));
}
dmu_objset_sync_dnodes(&os->os_free_dnodes[txgoff], newlist, tx);
dmu_objset_sync_dnodes(&os->os_dirty_dnodes[txgoff], newlist, tx);
list = &DMU_META_DNODE(os)->dn_dirty_records[txgoff];
while ((dr = list_head(list))) {
ASSERT0(dr->dr_dbuf->db_level);
list_remove(list, dr);
if (dr->dr_zio)
zio_nowait(dr->dr_zio);
}
/*
* Free intent log blocks up to this tx.
*/
zil_sync(os->os_zil, tx);
os->os_phys->os_zil_header = os->os_zil_header;
zio_nowait(zio);
}
boolean_t
dmu_objset_is_dirty(objset_t *os, uint64_t txg)
{
return (!list_is_empty(&os->os_dirty_dnodes[txg & TXG_MASK]) ||
!list_is_empty(&os->os_free_dnodes[txg & TXG_MASK]));
}
static objset_used_cb_t *used_cbs[DMU_OST_NUMTYPES];
void
dmu_objset_register_type(dmu_objset_type_t ost, objset_used_cb_t *cb)
{
used_cbs[ost] = cb;
}
boolean_t
dmu_objset_userused_enabled(objset_t *os)
{
return (spa_version(os->os_spa) >= SPA_VERSION_USERSPACE &&
used_cbs[os->os_phys->os_type] != NULL &&
DMU_USERUSED_DNODE(os) != NULL);
}
static void
do_userquota_update(objset_t *os, uint64_t used, uint64_t flags,
uint64_t user, uint64_t group, boolean_t subtract, dmu_tx_t *tx)
{
if ((flags & DNODE_FLAG_USERUSED_ACCOUNTED)) {
int64_t delta = DNODE_SIZE + used;
if (subtract)
delta = -delta;
VERIFY3U(0, ==, zap_increment_int(os, DMU_USERUSED_OBJECT,
user, delta, tx));
VERIFY3U(0, ==, zap_increment_int(os, DMU_GROUPUSED_OBJECT,
group, delta, tx));
}
}
void
dmu_objset_do_userquota_updates(objset_t *os, dmu_tx_t *tx)
{
dnode_t *dn;
list_t *list = &os->os_synced_dnodes;
ASSERT(list_head(list) == NULL || dmu_objset_userused_enabled(os));
while ((dn = list_head(list))) {
int flags;
ASSERT(!DMU_OBJECT_IS_SPECIAL(dn->dn_object));
ASSERT(dn->dn_phys->dn_type == DMU_OT_NONE ||
dn->dn_phys->dn_flags &
DNODE_FLAG_USERUSED_ACCOUNTED);
/* Allocate the user/groupused objects if necessary. */
if (DMU_USERUSED_DNODE(os)->dn_type == DMU_OT_NONE) {
VERIFY(0 == zap_create_claim(os,
DMU_USERUSED_OBJECT,
DMU_OT_USERGROUP_USED, DMU_OT_NONE, 0, tx));
VERIFY(0 == zap_create_claim(os,
DMU_GROUPUSED_OBJECT,
DMU_OT_USERGROUP_USED, DMU_OT_NONE, 0, tx));
}
/*
* We intentionally modify the zap object even if the
* net delta is zero. Otherwise
* the block of the zap obj could be shared between
* datasets but need to be different between them after
* a bprewrite.
*/
flags = dn->dn_id_flags;
ASSERT(flags);
if (flags & DN_ID_OLD_EXIST) {
do_userquota_update(os, dn->dn_oldused, dn->dn_oldflags,
dn->dn_olduid, dn->dn_oldgid, B_TRUE, tx);
}
if (flags & DN_ID_NEW_EXIST) {
do_userquota_update(os, DN_USED_BYTES(dn->dn_phys),
dn->dn_phys->dn_flags, dn->dn_newuid,
dn->dn_newgid, B_FALSE, tx);
}
mutex_enter(&dn->dn_mtx);
dn->dn_oldused = 0;
dn->dn_oldflags = 0;
if (dn->dn_id_flags & DN_ID_NEW_EXIST) {
dn->dn_olduid = dn->dn_newuid;
dn->dn_oldgid = dn->dn_newgid;
dn->dn_id_flags |= DN_ID_OLD_EXIST;
if (dn->dn_bonuslen == 0)
dn->dn_id_flags |= DN_ID_CHKED_SPILL;
else
dn->dn_id_flags |= DN_ID_CHKED_BONUS;
}
dn->dn_id_flags &= ~(DN_ID_NEW_EXIST);
mutex_exit(&dn->dn_mtx);
list_remove(list, dn);
dnode_rele(dn, list);
}
}
/*
* Returns a pointer to data to find uid/gid from
*
* If a dirty record for transaction group that is syncing can't
* be found then NULL is returned. In the NULL case it is assumed
* the uid/gid aren't changing.
*/
static void *
dmu_objset_userquota_find_data(dmu_buf_impl_t *db, dmu_tx_t *tx)
{
dbuf_dirty_record_t *dr, **drp;
void *data;
if (db->db_dirtycnt == 0)
return (db->db.db_data); /* Nothing is changing */
for (drp = &db->db_last_dirty; (dr = *drp) != NULL; drp = &dr->dr_next)
if (dr->dr_txg == tx->tx_txg)
break;
if (dr == NULL) {
data = NULL;
} else {
dnode_t *dn;
DB_DNODE_ENTER(dr->dr_dbuf);
dn = DB_DNODE(dr->dr_dbuf);
if (dn->dn_bonuslen == 0 &&
dr->dr_dbuf->db_blkid == DMU_SPILL_BLKID)
data = dr->dt.dl.dr_data->b_data;
else
data = dr->dt.dl.dr_data;
DB_DNODE_EXIT(dr->dr_dbuf);
}
return (data);
}
void
dmu_objset_userquota_get_ids(dnode_t *dn, boolean_t before, dmu_tx_t *tx)
{
objset_t *os = dn->dn_objset;
void *data = NULL;
dmu_buf_impl_t *db = NULL;
uint64_t *user = NULL;
uint64_t *group = NULL;
int flags = dn->dn_id_flags;
int error;
boolean_t have_spill = B_FALSE;
if (!dmu_objset_userused_enabled(dn->dn_objset))
return;
if (before && (flags & (DN_ID_CHKED_BONUS|DN_ID_OLD_EXIST|
DN_ID_CHKED_SPILL)))
return;
if (before && dn->dn_bonuslen != 0)
data = DN_BONUS(dn->dn_phys);
else if (!before && dn->dn_bonuslen != 0) {
if (dn->dn_bonus) {
db = dn->dn_bonus;
mutex_enter(&db->db_mtx);
data = dmu_objset_userquota_find_data(db, tx);
} else {
data = DN_BONUS(dn->dn_phys);
}
} else if (dn->dn_bonuslen == 0 && dn->dn_bonustype == DMU_OT_SA) {
int rf = 0;
if (RW_WRITE_HELD(&dn->dn_struct_rwlock))
rf |= DB_RF_HAVESTRUCT;
error = dmu_spill_hold_by_dnode(dn,
rf | DB_RF_MUST_SUCCEED,
FTAG, (dmu_buf_t **)&db);
ASSERT(error == 0);
mutex_enter(&db->db_mtx);
data = (before) ? db->db.db_data :
dmu_objset_userquota_find_data(db, tx);
have_spill = B_TRUE;
} else {
mutex_enter(&dn->dn_mtx);
dn->dn_id_flags |= DN_ID_CHKED_BONUS;
mutex_exit(&dn->dn_mtx);
return;
}
if (before) {
ASSERT(data);
user = &dn->dn_olduid;
group = &dn->dn_oldgid;
} else if (data) {
user = &dn->dn_newuid;
group = &dn->dn_newgid;
}
/*
* Must always call the callback in case the object
* type has changed and that type isn't an object type to track
*/
error = used_cbs[os->os_phys->os_type](dn->dn_bonustype, data,
user, group);
/*
* Preserve existing uid/gid when the callback can't determine
* what the new uid/gid are and the callback returned EEXIST.
* The EEXIST error tells us to just use the existing uid/gid.
* If we don't know what the old values are then just assign
* them to 0, since that is a new file being created.
*/
if (!before && data == NULL && error == EEXIST) {
if (flags & DN_ID_OLD_EXIST) {
dn->dn_newuid = dn->dn_olduid;
dn->dn_newgid = dn->dn_oldgid;
} else {
dn->dn_newuid = 0;
dn->dn_newgid = 0;
}
error = 0;
}
if (db)
mutex_exit(&db->db_mtx);
mutex_enter(&dn->dn_mtx);
if (error == 0 && before)
dn->dn_id_flags |= DN_ID_OLD_EXIST;
if (error == 0 && !before)
dn->dn_id_flags |= DN_ID_NEW_EXIST;
if (have_spill) {
dn->dn_id_flags |= DN_ID_CHKED_SPILL;
} else {
dn->dn_id_flags |= DN_ID_CHKED_BONUS;
}
mutex_exit(&dn->dn_mtx);
if (have_spill)
dmu_buf_rele((dmu_buf_t *)db, FTAG);
}
boolean_t
dmu_objset_userspace_present(objset_t *os)
{
return (os->os_phys->os_flags &
OBJSET_FLAG_USERACCOUNTING_COMPLETE);
}
int
dmu_objset_userspace_upgrade(objset_t *os)
{
uint64_t obj;
int err = 0;
if (dmu_objset_userspace_present(os))
return (0);
if (!dmu_objset_userused_enabled(os))
return (SET_ERROR(ENOTSUP));
if (dmu_objset_is_snapshot(os))
return (SET_ERROR(EINVAL));
/*
* We simply need to mark every object dirty, so that it will be
* synced out and now accounted. If this is called
* concurrently, or if we already did some work before crashing,
* that's fine, since we track each object's accounted state
* independently.
*/
for (obj = 0; err == 0; err = dmu_object_next(os, &obj, FALSE, 0)) {
dmu_tx_t *tx;
dmu_buf_t *db;
int objerr;
if (issig(JUSTLOOKING) && issig(FORREAL))
return (SET_ERROR(EINTR));
objerr = dmu_bonus_hold(os, obj, FTAG, &db);
if (objerr != 0)
continue;
tx = dmu_tx_create(os);
dmu_tx_hold_bonus(tx, obj);
objerr = dmu_tx_assign(tx, TXG_WAIT);
if (objerr != 0) {
dmu_tx_abort(tx);
continue;
}
dmu_buf_will_dirty(db, tx);
dmu_buf_rele(db, FTAG);
dmu_tx_commit(tx);
}
os->os_flags |= OBJSET_FLAG_USERACCOUNTING_COMPLETE;
txg_wait_synced(dmu_objset_pool(os), 0);
return (0);
}
void
dmu_objset_space(objset_t *os, uint64_t *refdbytesp, uint64_t *availbytesp,
uint64_t *usedobjsp, uint64_t *availobjsp)
{
dsl_dataset_space(os->os_dsl_dataset, refdbytesp, availbytesp,
usedobjsp, availobjsp);
}
uint64_t
dmu_objset_fsid_guid(objset_t *os)
{
return (dsl_dataset_fsid_guid(os->os_dsl_dataset));
}
void
dmu_objset_fast_stat(objset_t *os, dmu_objset_stats_t *stat)
{
stat->dds_type = os->os_phys->os_type;
if (os->os_dsl_dataset)
dsl_dataset_fast_stat(os->os_dsl_dataset, stat);
}
void
dmu_objset_stats(objset_t *os, nvlist_t *nv)
{
ASSERT(os->os_dsl_dataset ||
os->os_phys->os_type == DMU_OST_META);
if (os->os_dsl_dataset != NULL)
dsl_dataset_stats(os->os_dsl_dataset, nv);
dsl_prop_nvlist_add_uint64(nv, ZFS_PROP_TYPE,
os->os_phys->os_type);
dsl_prop_nvlist_add_uint64(nv, ZFS_PROP_USERACCOUNTING,
dmu_objset_userspace_present(os));
}
int
dmu_objset_is_snapshot(objset_t *os)
{
if (os->os_dsl_dataset != NULL)
return (dsl_dataset_is_snapshot(os->os_dsl_dataset));
else
return (B_FALSE);
}
int
dmu_snapshot_realname(objset_t *os, char *name, char *real, int maxlen,
boolean_t *conflict)
{
dsl_dataset_t *ds = os->os_dsl_dataset;
uint64_t ignored;
if (ds->ds_phys->ds_snapnames_zapobj == 0)
return (SET_ERROR(ENOENT));
return (zap_lookup_norm(ds->ds_dir->dd_pool->dp_meta_objset,
ds->ds_phys->ds_snapnames_zapobj, name, 8, 1, &ignored, MT_FIRST,
real, maxlen, conflict));
}
int
dmu_snapshot_list_next(objset_t *os, int namelen, char *name,
uint64_t *idp, uint64_t *offp, boolean_t *case_conflict)
{
dsl_dataset_t *ds = os->os_dsl_dataset;
zap_cursor_t cursor;
zap_attribute_t attr;
ASSERT(dsl_pool_config_held(dmu_objset_pool(os)));
if (ds->ds_phys->ds_snapnames_zapobj == 0)
return (SET_ERROR(ENOENT));
zap_cursor_init_serialized(&cursor,
ds->ds_dir->dd_pool->dp_meta_objset,
ds->ds_phys->ds_snapnames_zapobj, *offp);
if (zap_cursor_retrieve(&cursor, &attr) != 0) {
zap_cursor_fini(&cursor);
return (SET_ERROR(ENOENT));
}
if (strlen(attr.za_name) + 1 > namelen) {
zap_cursor_fini(&cursor);
return (SET_ERROR(ENAMETOOLONG));
}
(void) strcpy(name, attr.za_name);
if (idp)
*idp = attr.za_first_integer;
if (case_conflict)
*case_conflict = attr.za_normalization_conflict;
zap_cursor_advance(&cursor);
*offp = zap_cursor_serialize(&cursor);
zap_cursor_fini(&cursor);
return (0);
}
int
dmu_snapshot_lookup(objset_t *os, const char *name, uint64_t *value)
{
return dsl_dataset_snap_lookup(os->os_dsl_dataset, name, value);
}
int
dmu_dir_list_next(objset_t *os, int namelen, char *name,
uint64_t *idp, uint64_t *offp)
{
dsl_dir_t *dd = os->os_dsl_dataset->ds_dir;
zap_cursor_t cursor;
zap_attribute_t attr;
/* there is no next dir on a snapshot! */
if (os->os_dsl_dataset->ds_object !=
dd->dd_phys->dd_head_dataset_obj)
return (SET_ERROR(ENOENT));
zap_cursor_init_serialized(&cursor,
dd->dd_pool->dp_meta_objset,
dd->dd_phys->dd_child_dir_zapobj, *offp);
if (zap_cursor_retrieve(&cursor, &attr) != 0) {
zap_cursor_fini(&cursor);
return (SET_ERROR(ENOENT));
}
if (strlen(attr.za_name) + 1 > namelen) {
zap_cursor_fini(&cursor);
return (SET_ERROR(ENAMETOOLONG));
}
(void) strcpy(name, attr.za_name);
if (idp)
*idp = attr.za_first_integer;
zap_cursor_advance(&cursor);
*offp = zap_cursor_serialize(&cursor);
zap_cursor_fini(&cursor);
return (0);
}
/*
* Find objsets under and including ddobj, call func(ds) on each.
*/
int
dmu_objset_find_dp(dsl_pool_t *dp, uint64_t ddobj,
int func(dsl_pool_t *, dsl_dataset_t *, void *), void *arg, int flags)
{
dsl_dir_t *dd;
dsl_dataset_t *ds;
zap_cursor_t zc;
zap_attribute_t *attr;
uint64_t thisobj;
int err;
ASSERT(dsl_pool_config_held(dp));
err = dsl_dir_hold_obj(dp, ddobj, NULL, FTAG, &dd);
if (err != 0)
return (err);
/* Don't visit hidden ($MOS & $ORIGIN) objsets. */
if (dd->dd_myname[0] == '$') {
dsl_dir_rele(dd, FTAG);
return (0);
}
thisobj = dd->dd_phys->dd_head_dataset_obj;
attr = kmem_alloc(sizeof (zap_attribute_t), KM_PUSHPAGE);
/*
* Iterate over all children.
*/
if (flags & DS_FIND_CHILDREN) {
for (zap_cursor_init(&zc, dp->dp_meta_objset,
dd->dd_phys->dd_child_dir_zapobj);
zap_cursor_retrieve(&zc, attr) == 0;
(void) zap_cursor_advance(&zc)) {
ASSERT3U(attr->za_integer_length, ==,
sizeof (uint64_t));
ASSERT3U(attr->za_num_integers, ==, 1);
err = dmu_objset_find_dp(dp, attr->za_first_integer,
func, arg, flags);
if (err != 0)
break;
}
zap_cursor_fini(&zc);
if (err != 0) {
dsl_dir_rele(dd, FTAG);
kmem_free(attr, sizeof (zap_attribute_t));
return (err);
}
}
/*
* Iterate over all snapshots.
*/
if (flags & DS_FIND_SNAPSHOTS) {
dsl_dataset_t *ds;
err = dsl_dataset_hold_obj(dp, thisobj, FTAG, &ds);
if (err == 0) {
uint64_t snapobj = ds->ds_phys->ds_snapnames_zapobj;
dsl_dataset_rele(ds, FTAG);
for (zap_cursor_init(&zc, dp->dp_meta_objset, snapobj);
zap_cursor_retrieve(&zc, attr) == 0;
(void) zap_cursor_advance(&zc)) {
ASSERT3U(attr->za_integer_length, ==,
sizeof (uint64_t));
ASSERT3U(attr->za_num_integers, ==, 1);
err = dsl_dataset_hold_obj(dp,
attr->za_first_integer, FTAG, &ds);
if (err != 0)
break;
err = func(dp, ds, arg);
dsl_dataset_rele(ds, FTAG);
if (err != 0)
break;
}
zap_cursor_fini(&zc);
}
}
dsl_dir_rele(dd, FTAG);
kmem_free(attr, sizeof (zap_attribute_t));
if (err != 0)
return (err);
/*
* Apply to self.
*/
err = dsl_dataset_hold_obj(dp, thisobj, FTAG, &ds);
if (err != 0)
return (err);
err = func(dp, ds, arg);
dsl_dataset_rele(ds, FTAG);
return (err);
}
/*
* Find all objsets under name, and for each, call 'func(child_name, arg)'.
* The dp_config_rwlock must not be held when this is called, and it
* will not be held when the callback is called.
* Therefore this function should only be used when the pool is not changing
* (e.g. in syncing context), or the callback can deal with the possible races.
*/
static int
dmu_objset_find_impl(spa_t *spa, const char *name,
int func(const char *, void *), void *arg, int flags)
{
dsl_dir_t *dd;
dsl_pool_t *dp = spa_get_dsl(spa);
dsl_dataset_t *ds;
zap_cursor_t zc;
zap_attribute_t *attr;
char *child;
uint64_t thisobj;
int err;
dsl_pool_config_enter(dp, FTAG);
err = dsl_dir_hold(dp, name, FTAG, &dd, NULL);
if (err != 0) {
dsl_pool_config_exit(dp, FTAG);
return (err);
}
/* Don't visit hidden ($MOS & $ORIGIN) objsets. */
if (dd->dd_myname[0] == '$') {
dsl_dir_rele(dd, FTAG);
dsl_pool_config_exit(dp, FTAG);
return (0);
}
thisobj = dd->dd_phys->dd_head_dataset_obj;
attr = kmem_alloc(sizeof (zap_attribute_t), KM_PUSHPAGE);
/*
* Iterate over all children.
*/
if (flags & DS_FIND_CHILDREN) {
for (zap_cursor_init(&zc, dp->dp_meta_objset,
dd->dd_phys->dd_child_dir_zapobj);
zap_cursor_retrieve(&zc, attr) == 0;
(void) zap_cursor_advance(&zc)) {
ASSERT3U(attr->za_integer_length, ==,
sizeof (uint64_t));
ASSERT3U(attr->za_num_integers, ==, 1);
child = kmem_asprintf("%s/%s", name, attr->za_name);
dsl_pool_config_exit(dp, FTAG);
err = dmu_objset_find_impl(spa, child,
func, arg, flags);
dsl_pool_config_enter(dp, FTAG);
strfree(child);
if (err != 0)
break;
}
zap_cursor_fini(&zc);
if (err != 0) {
dsl_dir_rele(dd, FTAG);
dsl_pool_config_exit(dp, FTAG);
kmem_free(attr, sizeof (zap_attribute_t));
return (err);
}
}
/*
* Iterate over all snapshots.
*/
if (flags & DS_FIND_SNAPSHOTS) {
err = dsl_dataset_hold_obj(dp, thisobj, FTAG, &ds);
if (err == 0) {
uint64_t snapobj = ds->ds_phys->ds_snapnames_zapobj;
dsl_dataset_rele(ds, FTAG);
for (zap_cursor_init(&zc, dp->dp_meta_objset, snapobj);
zap_cursor_retrieve(&zc, attr) == 0;
(void) zap_cursor_advance(&zc)) {
ASSERT3U(attr->za_integer_length, ==,
sizeof (uint64_t));
ASSERT3U(attr->za_num_integers, ==, 1);
child = kmem_asprintf("%s@%s",
name, attr->za_name);
dsl_pool_config_exit(dp, FTAG);
err = func(child, arg);
dsl_pool_config_enter(dp, FTAG);
strfree(child);
if (err != 0)
break;
}
zap_cursor_fini(&zc);
}
}
dsl_dir_rele(dd, FTAG);
kmem_free(attr, sizeof (zap_attribute_t));
dsl_pool_config_exit(dp, FTAG);
if (err != 0)
return (err);
/* Apply to self. */
return (func(name, arg));
}
/*
* See comment above dmu_objset_find_impl().
*/
int
dmu_objset_find(char *name, int func(const char *, void *), void *arg,
int flags)
{
spa_t *spa;
int error;
error = spa_open(name, &spa, FTAG);
if (error != 0)
return (error);
error = dmu_objset_find_impl(spa, name, func, arg, flags);
spa_close(spa, FTAG);
return (error);
}
void
dmu_objset_set_user(objset_t *os, void *user_ptr)
{
ASSERT(MUTEX_HELD(&os->os_user_ptr_lock));
os->os_user_ptr = user_ptr;
}
void *
dmu_objset_get_user(objset_t *os)
{
ASSERT(MUTEX_HELD(&os->os_user_ptr_lock));
return (os->os_user_ptr);
}
/*
* Determine name of filesystem, given name of snapshot.
* buf must be at least MAXNAMELEN bytes
*/
int
dmu_fsname(const char *snapname, char *buf)
{
char *atp = strchr(snapname, '@');
if (atp == NULL)
return (SET_ERROR(EINVAL));
if (atp - snapname >= MAXNAMELEN)
return (SET_ERROR(ENAMETOOLONG));
(void) strlcpy(buf, snapname, atp - snapname + 1);
return (0);
}
#if defined(_KERNEL) && defined(HAVE_SPL)
EXPORT_SYMBOL(dmu_objset_zil);
EXPORT_SYMBOL(dmu_objset_pool);
EXPORT_SYMBOL(dmu_objset_ds);
EXPORT_SYMBOL(dmu_objset_type);
EXPORT_SYMBOL(dmu_objset_name);
EXPORT_SYMBOL(dmu_objset_hold);
EXPORT_SYMBOL(dmu_objset_own);
EXPORT_SYMBOL(dmu_objset_rele);
EXPORT_SYMBOL(dmu_objset_disown);
EXPORT_SYMBOL(dmu_objset_from_ds);
EXPORT_SYMBOL(dmu_objset_create);
EXPORT_SYMBOL(dmu_objset_clone);
EXPORT_SYMBOL(dmu_objset_stats);
EXPORT_SYMBOL(dmu_objset_fast_stat);
EXPORT_SYMBOL(dmu_objset_spa);
EXPORT_SYMBOL(dmu_objset_space);
EXPORT_SYMBOL(dmu_objset_fsid_guid);
EXPORT_SYMBOL(dmu_objset_find);
EXPORT_SYMBOL(dmu_objset_byteswap);
EXPORT_SYMBOL(dmu_objset_evict_dbufs);
EXPORT_SYMBOL(dmu_objset_snap_cmtime);
EXPORT_SYMBOL(dmu_objset_sync);
EXPORT_SYMBOL(dmu_objset_is_dirty);
EXPORT_SYMBOL(dmu_objset_create_impl);
EXPORT_SYMBOL(dmu_objset_open_impl);
EXPORT_SYMBOL(dmu_objset_evict);
EXPORT_SYMBOL(dmu_objset_register_type);
EXPORT_SYMBOL(dmu_objset_do_userquota_updates);
EXPORT_SYMBOL(dmu_objset_userquota_get_ids);
EXPORT_SYMBOL(dmu_objset_userused_enabled);
EXPORT_SYMBOL(dmu_objset_userspace_upgrade);
EXPORT_SYMBOL(dmu_objset_userspace_present);
#endif
Reference in New Issue View Git Blame Copy Permalink