d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-nq/sys/dev
History
Adrian Chadd 9a97e25edf Implement setting the short preamble bit if it's needed for the current node. 
Short preamble rates are only for legacy rates; MCS rate codes don't have a short
preamble code like this.
2011-02-21 03:52:51 +00:00
..
aac
We can pass a format string and args to panic(), so instead of using
2011-02-04 15:45:48 +00:00
acpi_support
Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier.
2011-01-19 00:57:58 +00:00
acpica
Rework r218685. Copy just enough data for the resource type.
2011-02-14 20:05:37 +00:00
adb
…
adlink
Remove an unnecessary INTR_MPSAFE and a comment suggesting it was
2011-01-06 21:02:14 +00:00
advansys
…
ae
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
age
Forgot to remove unlock of the driver lock from age_start_locked() when
2011-01-13 13:04:49 +00:00
agp
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC
2010-10-31 18:27:05 +00:00
aha
…
ahb
…
ahci
Restore DH89xxCC/Patsburg chip IDs accentally dropped at r218596.
2011-02-12 13:28:50 +00:00
aic
…
aic7xxx
Revert r213765. This is required because our build infrastructure uses
2010-10-14 19:19:19 +00:00
alc
alc_rev was used without initialization such that it failed to
2011-01-31 20:00:43 +00:00
ale
Fix some bugs in my last set of changes to ale(4):
2011-01-18 16:27:40 +00:00
amd
…
amdsbwd
amdsbwd: fix nonsensical timeout calculations
2010-05-31 09:07:23 +00:00
amdtemp
…
amr
Fix clang warning on empty statement.
2010-07-28 16:24:11 +00:00
an
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
arcmsr
Workaround build for PAE case for now - revert the PHYS
2010-11-14 05:05:41 +00:00
asmc
…
asr
Don't zero 'Info' after setting it up in the ASR_IOCTL_COMPAT case.
2010-11-25 21:51:43 +00:00
ata
Support for the new Patsburg PCH chipset:
2011-02-01 01:05:11 +00:00
ath
Implement setting the short preamble bit if it's needed for the current node.
2011-02-21 03:52:51 +00:00
atkbdc
Only use the BIOS-supplied IRQ for the atkbdc device for a child atkbd
2010-12-21 12:49:37 +00:00
auxio
…
bce
- Updated firmware which improves small packet performance.
2011-02-11 00:41:49 +00:00
bfe
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
bge
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
bktr
Fix build on architectures where PAGE_SIZE is a long (sparc64, powerpc).
2010-07-13 19:27:20 +00:00
bm
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
buslogic
Remove some always-true comparisons.
2011-01-18 15:23:16 +00:00
bwi
Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
2011-01-17 20:15:15 +00:00
bwn
Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
2011-01-17 20:15:15 +00:00
cardbus
…
cas
- Fix and enable support for flow control.
2010-11-22 22:06:30 +00:00
ce
Revert r213793.
2010-10-13 17:38:23 +00:00
cfe
Start using the 'init_static_kenv()' API provided by r198561 to initialize
2010-08-11 02:13:50 +00:00
cfi
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ciss
Cosmetic: make it less confusing when displaying RAID 1 level, that might
2010-10-02 08:18:19 +00:00
cm
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cmx
…
coretemp
Catch known CPUs before using IA32_TEMPERATURE_TARGET.
2010-08-04 00:25:13 +00:00
cp
Revert r213793.
2010-10-13 17:38:23 +00:00
cpuctl
…
cpufreq
…
cs
Use bus space functions rather than inw/outw
2011-01-29 00:53:58 +00:00
ct
…
ctau
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
cxgb
Explicitly wire the user buffer rather than doing it implicitly in
2011-01-27 00:34:12 +00:00
cxgbe
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters.
2011-02-18 08:00:26 +00:00
cy
…
dc
s/u_intXX_t/uintXX_t/g
2011-02-19 03:32:10 +00:00
dcons
…
de
…
digi
…
dpms
…
dpt
…
drm
Introduce and use a new VM interface for temporarily pinning pages. This
2010-12-25 21:26:56 +00:00
e1000
Fix the shared code to be consistent with Intel-internal,
2011-02-12 00:07:40 +00:00
ed
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
eisa
…
en
Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need
2011-01-18 21:14:23 +00:00
ep
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
esp
Include <machine/ofw_machdep.h> for OF_getscsinitid().
2010-05-10 20:02:39 +00:00
et
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
ex
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
exca
…
fatm
Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need
2011-01-18 21:14:23 +00:00
fb
Use the preload_fetch_addr() and preload_fetch_size() convenience
2011-02-13 19:25:48 +00:00
fdc
Fix a regression from r200554, which broke fdc(4) attachment to acpi(4).
2010-05-30 03:45:41 +00:00
fdt
Don't operate on the parent of the PCI node. It's the PCI node itself
2011-01-29 21:14:29 +00:00
fe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
firewire
Remove references to MAKEDEV(8)
2010-11-15 05:25:51 +00:00
flash
Modify the spi flash driver to allow smaller read IO sizes, but enforce
2011-02-16 20:07:44 +00:00
fxp
Fix a regression introduced in r215906. The change made in r215906
2011-02-15 18:16:04 +00:00
gem
- Fix and enable support for flow control.
2010-11-22 22:13:26 +00:00
glxsb
…
gpio
Add a GPIO driver for the Gateworks Cambria platform.
2010-11-11 20:18:33 +00:00
hatm
…
hifn
No need to zero the softc. It's allocated with M_ZERO.
2010-12-18 14:24:24 +00:00
hme
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
hptiop
Report transport type in XPT_PATH_INQ.
2010-06-19 13:41:17 +00:00
hptmv
Report transport type in XPT_PATH_INQ.
2010-06-19 13:42:14 +00:00
hptrr
Pass a format string to make_dev().
2010-10-13 14:41:52 +00:00
hwpmc
Fix two aliases that had the same name but were pointing to different
2010-10-04 17:22:18 +00:00
ic
…
ichsmb
Support for the new Patsburg PCH chipset:
2011-02-01 01:05:11 +00:00
ichwd
Support for the new Patsburg PCH chipset:
2011-02-01 01:05:11 +00:00
ida
…
ie
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ieee488
Implement more of __ibsta: END and SRQI status bits (taken out of the
2010-12-10 22:20:11 +00:00
if_ndis
Revert the ndis part of r212122, windrv_stub.c already adds a MODULE_VERSION
2011-01-22 21:33:18 +00:00
iicbus
There are PowerMacs which do not have a hwsensor-location property
2011-01-18 21:47:30 +00:00
iir
…
io
- Extract the IODEV_PIO interface from ia64 and make it MI.
2010-04-28 15:38:01 +00:00
ipmi
Fix test for double-nul characters that terminate the string table at
2010-07-29 13:46:37 +00:00
ips
…
ipw
Enable 5.5 and 11Mbit TX rates.
2010-05-11 17:14:17 +00:00
iscsi/initiator
Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need
2011-01-18 21:14:23 +00:00
isp
- Use the correct DMA tag/map pair for synchronize the FC scratch area.
2011-02-14 21:50:51 +00:00
ispfw
Update firmware to more recent versions.
2011-01-05 23:15:22 +00:00
iwi
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
iwn
Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
2011-01-17 20:15:15 +00:00
ixgb
Do not allocate multicast array memory in multicast filter
2010-08-28 00:34:22 +00:00
ixgbe
Don't bother to run the flowcontrol code if there
2011-01-22 00:19:15 +00:00
jme
- Add a locked variant of jme_start() and invoke it directly while holding
2011-01-13 14:42:43 +00:00
joy
…
kbd
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
kbdmux
Explicitly tell the compiler that we don't care about the return value
2010-10-13 11:37:12 +00:00
ksyms
…
le
Use convenience functions where possible instead of accessing the PCI
2010-12-18 14:21:28 +00:00
led
Fix an incorrect use of sbuf_overflowed() after a call to sbuf_finish().
2010-09-09 18:35:08 +00:00
lge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
lindev
…
lmc
Merge amd64 and i386 bus.h and move the resulting header to x86. Replace
2010-12-20 16:39:43 +00:00
malo
Use convenience functions where possible instead of accessing the PCI
2010-12-18 14:21:28 +00:00
mc146818
…
mca
…
mcd
…
md
Use the preload_fetch_addr() and preload_fetch_size() convenience
2011-02-09 19:31:10 +00:00
mem
Add reader/writer lock around mem_range_attr_get() and mem_range_attr_set().
2011-01-17 22:58:28 +00:00
mfi
When masking direct and processor devices during an inquiry, properly
2010-12-06 17:02:56 +00:00
mge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
mii
Add Realtek RTL8201E 10/100 PHY found in RTL8105E controller. The
2011-01-26 21:07:44 +00:00
mk48txx
…
mlx
…
mly
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
mmc
Fix 32bit bit fields handling. This fixes card serial number fetching.
2011-01-17 19:31:34 +00:00
mn
…
mps
Fix several issues with the mps(4) driver.
2011-02-18 17:06:06 +00:00
mpt
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
mse
…
msk
Introduce signed and unsigned version of CTLTYPE_QUAD, renaming
2011-01-19 23:00:25 +00:00
mvs
Workaround strange situation when EDMA_RESQIP register returns zero instead
2010-10-20 07:47:31 +00:00
mwl
The mwl's HAL manages an array of MWL_MBSS_MAX VAPs where the first 8 are
2010-12-31 09:50:15 +00:00
mxge
Use a regular taskqueue rather than a fast taskqueue for mxge(4).
2011-01-07 16:07:29 +00:00
my
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ncv
…
nfe
Reinitialize driver when MTU is changed and driver is running.
2011-01-24 17:53:58 +00:00
nge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nmdm
…
nsp
…
null
Mark /dev/zero and /dev/null as eternal.
2010-08-06 09:47:48 +00:00
nve
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
nvram
…
nxge
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
ofw
Return IEEE 1275 compliant error codes.
2010-11-11 13:42:46 +00:00
patm
Fix a few more SYSCTL_PROC() that were missing a CTLFLAG type specifier.
2011-01-19 00:57:58 +00:00
pbio
…
pccard
Fix typos.
2010-11-09 10:59:09 +00:00
pccbb
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
pcf
…
pci
Use the preload_fetch_addr() and preload_fetch_size() convenience
2011-02-13 19:26:51 +00:00
pcn
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
pdq
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
powermac_nvram
Add support for the Sharp/Micron flash chips to powermac_mvram(4).
2010-09-05 20:04:02 +00:00
ppbus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ppc
- Add support for MosChip 9865 Single 1284 Printer port
2011-02-19 17:38:51 +00:00
pst
…
pty
Finish r210923, 210926. Mark some devices as eternal.
2011-01-04 10:59:38 +00:00
puc
Add Exar octal PCI UART.
2010-12-18 02:54:51 +00:00
quicc
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
ral
Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
2011-01-17 20:15:15 +00:00
random
Finish r210923, 210926. Mark some devices as eternal.
2011-01-04 10:59:38 +00:00
rc
…
re
Add initial support for RTL8401E PCIe Fast Ethernet.
2011-02-16 21:59:42 +00:00
rndtest
…
rp
…
safe
…
sbni
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
scc
…
scd
…
sdhci
…
sec
Convert Freescale PowerPC platforms to FDT convention.
2010-07-11 21:08:29 +00:00
sf
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sge
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
si
…
siba
Fix double ;;
2010-12-06 10:24:06 +00:00
siis
Add missing part of r217877.
2011-01-26 13:10:07 +00:00
sio
Based on discussions on the svn-src mailing list, rework r218195:
2011-02-08 00:16:36 +00:00
sis
Rework RX filter programming by providing separate handler for
2011-01-18 17:50:14 +00:00
sk
Fix a long standing bug in programming station address for Yukon
2010-11-06 22:07:22 +00:00
smbus
…
smc
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
sn
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snc
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
snp
…
sound
- Make an enum for all the umidi USB transfers.
2011-02-18 07:37:30 +00:00
speaker
…
spibus
bus_add_child: change type of order parameter to u_int
2010-09-10 11:19:03 +00:00
ste
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
stg
…
stge
o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control
2010-11-14 13:26:10 +00:00
streams
…
sym
- On sparc64 obtain the initiator ID from the Open Firmware device tree
2010-04-27 18:05:33 +00:00
syscons
Rename a variable to match scvidctl.c.
2010-11-30 17:34:15 +00:00
tdfx
Remove references to MAKEDEV(8)
2010-11-15 05:25:51 +00:00
ti
Neither the page lock nor the page queues lock is required to unwire and
2010-05-03 15:51:59 +00:00
tl
- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective
2010-10-24 12:51:02 +00:00
tpm
Add tpm(4) driver for Trusted Platform Module.
2010-08-12 00:16:18 +00:00
trm
MFp4: Large set of CAM inprovements.
2010-01-28 08:41:30 +00:00
tsec
Don't use the MAC address in the device tree if it's all zeroes
2011-01-28 23:40:13 +00:00
twa
Fix a compile problem introduced with r212008 on 32bit:
2010-09-04 16:27:14 +00:00
twe
…
tx
Converted the remainder of the NIC drivers to use the mii_attach()
2010-10-15 15:00:30 +00:00
txp
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly.
2011-01-12 19:53:56 +00:00
uart
In uart_tty_outwakeup(), check CTS/RTS flow control settings and
2011-01-24 18:34:16 +00:00
ubsec
Cast the bus_size_t to a intmax_t rather than assuming type-punning to
2010-03-29 17:26:24 +00:00
usb
Add more udav device ID's.
2011-02-19 22:53:50 +00:00
utopia
…
vge
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vkbd
…
vr
Convert the PHY drivers to honor the mii_flags passed down and convert
2010-10-15 14:52:11 +00:00
vte
Remove debugging leftovers.
2010-12-31 01:23:04 +00:00
vx
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
watchdog
…
wb
Fix indentation in r213894.
2010-11-07 12:29:26 +00:00
wds
…
wi
sysctl(8) should use the CTLTYPE to determine the type of data when
2011-01-19 17:04:07 +00:00
wl
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
wpi
Pull ieee80211_ratectl_node_init() calls from drivers into net80211.
2011-01-17 20:15:15 +00:00
xe
Add new tunable 'net.link.ifqmaxlen' to set default send interface
2010-05-03 07:32:50 +00:00
xen
Fix bug in the netfront driver that caused excessive packet drops during
2011-01-29 02:36:45 +00:00
xl
Add flow control for 3C905B and newer controllers. Note, these
2010-11-14 23:53:13 +00:00