freebsd-nq/sys/dev/cxgb/cxgb_osdep.h

265 lines
7.8 KiB
C

/**************************************************************************
Copyright (c) 2007, Chelsio Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the Chelsio Corporation nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
$FreeBSD$
***************************************************************************/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ctype.h>
#include <sys/endian.h>
#include <sys/bus.h>
#include <dev/mii/mii.h>
#include <dev/cxgb/common/cxgb_version.h>
#include <dev/cxgb/cxgb_config.h>
#ifndef _CXGB_OSDEP_H_
#define _CXGB_OSDEP_H_
typedef struct adapter adapter_t;
struct sge_rspq;
struct t3_mbuf_hdr {
struct mbuf *mh_head;
struct mbuf *mh_tail;
};
#if __FreeBSD_version > 700030
#define INTR_FILTERS
#define FIRMWARE_LATEST
#endif
#if ((__FreeBSD_version > 602103) && (__FreeBSD_version < 700000))
#define FIRMWARE_LATEST
#endif
#if __FreeBSD_version > 700000
#define MSI_SUPPORTED
#define TSO_SUPPORTED
#define VLAN_SUPPORTED
#define TASKQUEUE_CURRENT
#endif
/*
* Workaround for weird Chelsio issue
*/
#if __FreeBSD_version > 700029
#define PRIV_SUPPORTED
#endif
#define CXGB_TX_CLEANUP_THRESHOLD 32
#ifdef DEBUG_PRINT
#define DPRINTF printf
#else
#define DPRINTF(...)
#endif
#define TX_MAX_SIZE (1 << 16) /* 64KB */
#define TX_MAX_SEGS 36 /* maximum supported by card */
#define TX_MAX_DESC 4 /* max descriptors per packet */
#define TX_START_MAX_DESC (TX_MAX_DESC << 1) /* maximum number of descriptors
* call to start used per */
#define TX_CLEAN_MAX_DESC (TX_MAX_DESC << 2) /* maximum tx descriptors
* to clean per iteration */
#if defined(__i386__) || defined(__amd64__)
#define mb() __asm volatile("mfence":::"memory")
#define rmb() __asm volatile("lfence":::"memory")
#define wmb() __asm volatile("sfence" ::: "memory")
#define smp_mb() mb()
#define USE_PREFETCH
#ifdef USE_PREFETCH
#define L1_CACHE_BYTES 64
static __inline
void prefetch(void *x)
{
__asm volatile("prefetcht0 %0" :: "m" (*(unsigned long *)x));
}
#else
#define prefetch(x)
#endif
#else /* !i386 && !amd64 */
#define mb()
#define rmb()
#define wmb()
#define smp_mb()
#endif
#define DBG_RX (1 << 0)
static const int debug_flags = DBG_RX;
#ifdef DEBUG_PRINT
#define DBG(flag, msg) do { \
if ((flag & debug_flags)) \
printf msg; \
} while (0)
#else
#define DBG(...)
#endif
#define promisc_rx_mode(rm) ((rm)->port->ifp->if_flags & IFF_PROMISC)
#define allmulti_rx_mode(rm) ((rm)->port->ifp->if_flags & IFF_ALLMULTI)
#define CH_ERR(adap, fmt, ...)device_printf(adap->dev, fmt, ##__VA_ARGS__);
#define CH_WARN(adap, fmt, ...) device_printf(adap->dev, fmt, ##__VA_ARGS__)
#define CH_ALERT(adap, fmt, ...) device_printf(adap->dev, fmt, ##__VA_ARGS__)
#define t3_os_sleep(x) DELAY((x) * 1000)
/* Standard PHY definitions */
#define BMCR_LOOPBACK BMCR_LOOP
#define BMCR_ISOLATE BMCR_ISO
#define BMCR_ANENABLE BMCR_AUTOEN
#define BMCR_SPEED1000 BMCR_SPEED1
#define BMCR_SPEED100 BMCR_SPEED0
#define BMCR_ANRESTART BMCR_STARTNEG
#define BMCR_FULLDPLX BMCR_FDX
#define BMSR_LSTATUS BMSR_LINK
#define BMSR_ANEGCOMPLETE BMSR_ACOMP
#define MII_LPA MII_ANLPAR
#define MII_ADVERTISE MII_ANAR
#define MII_CTRL1000 MII_100T2CR
#define ADVERTISE_PAUSE_CAP ANAR_FC
#define ADVERTISE_PAUSE_ASYM 0x0800
#define ADVERTISE_1000HALF ANAR_X_HD
#define ADVERTISE_1000FULL ANAR_X_FD
#define ADVERTISE_10FULL ANAR_10_FD
#define ADVERTISE_10HALF ANAR_10
#define ADVERTISE_100FULL ANAR_TX_FD
#define ADVERTISE_100HALF ANAR_TX
/* Standard PCI Extended Capaibilities definitions */
#define PCI_CAP_ID_VPD 0x03
#define PCI_VPD_ADDR 2
#define PCI_VPD_ADDR_F 0x8000
#define PCI_VPD_DATA 4
#define PCI_CAP_ID_EXP 0x10
#define PCI_EXP_DEVCTL 8
#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0
#define PCI_EXP_LNKCTL 16
#define PCI_EXP_LNKSTA 18
/*
* Linux compatibility macros
*/
/* Some simple translations */
#define __devinit
#define udelay(x) DELAY(x)
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#define le32_to_cpu(x) le32toh(x)
#define cpu_to_le32(x) htole32(x)
#define swab32(x) bswap32(x)
#define simple_strtoul strtoul
/* More types and endian definitions */
typedef uint8_t u8;
typedef uint16_t u16;
typedef uint32_t u32;
typedef uint64_t u64;
typedef uint8_t __u8;
typedef uint16_t __u16;
typedef uint32_t __u32;
typedef uint8_t __be8;
typedef uint16_t __be16;
typedef uint32_t __be32;
typedef uint64_t __be64;
#if BYTE_ORDER == BIG_ENDIAN
#define __BIG_ENDIAN_BITFIELD
#elif BYTE_ORDER == LITTLE_ENDIAN
#define __LITTLE_ENDIAN_BITFIELD
#else
#error "Must set BYTE_ORDER"
#endif
/* Indicates what features are supported by the interface. */
#define SUPPORTED_10baseT_Half (1 << 0)
#define SUPPORTED_10baseT_Full (1 << 1)
#define SUPPORTED_100baseT_Half (1 << 2)
#define SUPPORTED_100baseT_Full (1 << 3)
#define SUPPORTED_1000baseT_Half (1 << 4)
#define SUPPORTED_1000baseT_Full (1 << 5)
#define SUPPORTED_Autoneg (1 << 6)
#define SUPPORTED_TP (1 << 7)
#define SUPPORTED_AUI (1 << 8)
#define SUPPORTED_MII (1 << 9)
#define SUPPORTED_FIBRE (1 << 10)
#define SUPPORTED_BNC (1 << 11)
#define SUPPORTED_10000baseT_Full (1 << 12)
#define SUPPORTED_Pause (1 << 13)
#define SUPPORTED_Asym_Pause (1 << 14)
/* Indicates what features are advertised by the interface. */
#define ADVERTISED_10baseT_Half (1 << 0)
#define ADVERTISED_10baseT_Full (1 << 1)
#define ADVERTISED_100baseT_Half (1 << 2)
#define ADVERTISED_100baseT_Full (1 << 3)
#define ADVERTISED_1000baseT_Half (1 << 4)
#define ADVERTISED_1000baseT_Full (1 << 5)
#define ADVERTISED_Autoneg (1 << 6)
#define ADVERTISED_TP (1 << 7)
#define ADVERTISED_AUI (1 << 8)
#define ADVERTISED_MII (1 << 9)
#define ADVERTISED_FIBRE (1 << 10)
#define ADVERTISED_BNC (1 << 11)
#define ADVERTISED_10000baseT_Full (1 << 12)
#define ADVERTISED_Pause (1 << 13)
#define ADVERTISED_Asym_Pause (1 << 14)
/* Enable or disable autonegotiation. If this is set to enable,
* the forced link modes above are completely ignored.
*/
#define AUTONEG_DISABLE 0x00
#define AUTONEG_ENABLE 0x01
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
#define SPEED_10000 10000
#define DUPLEX_HALF 0
#define DUPLEX_FULL 1
#endif