freebsd-nq/sys/dev/iicbus/twsi/twsi.h
Emmanuel Vadot b74b94d2a1 twsi: Rework how we handle the i2c messages
We use to handle each message separately in i2c_transfer but that cannot
work with message with NOSTOP as it confuses the controller that we disable
the interrupts and start a new message.
Handle every message in the interrupt handler and fire a new start condition
if the previous message have NOSTOP, the controller understand this as a
repeated start.
This fixes booting on Allwinner A10/A20 platform where before the i2c controller
used to write 0 to the PMIC register that control the regulators as it though that
this was the continuation of the write message.

Tested on:   A20 BananaPi, Cubieboard 1 (kevans)
Reported by:	kevans
MFC after:	1 month
2020-01-10 18:52:14 +00:00

88 lines
2.5 KiB
C

/*-
* Copyright (C) 2008 MARVELL INTERNATIONAL LTD.
* All rights reserved.
*
* Developed by Semihalf.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of MARVELL nor the names of contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _TWSI_H_
#define _TWSI_H_
#ifdef EXT_RESOURCES
#include <dev/extres/clk/clk.h>
#endif
struct twsi_baud_rate {
uint32_t raw;
int param;
int m;
int n;
};
struct twsi_softc {
device_t dev;
struct resource *res[2];
struct mtx mutex;
device_t iicbus;
#ifdef EXT_RESOURCES
clk_t clk_core;
clk_t clk_reg;
#endif
void * intrhand;
bool have_intr;
struct iic_msg *msgs;
uint32_t nmsgs;
uint32_t msg_idx;
uint16_t sent_bytes;
uint16_t recv_bytes;
int transfer;
int error;
uint32_t control_val;
bool need_ack;
bus_size_t reg_data;
bus_size_t reg_slave_addr;
bus_size_t reg_slave_ext_addr;
bus_size_t reg_control;
bus_size_t reg_status;
bus_size_t reg_baud_rate;
bus_size_t reg_soft_reset;
struct twsi_baud_rate baud_rate[IIC_FASTEST + 1];
};
DECLARE_CLASS(twsi_driver);
#define TWSI_BAUD_RATE_PARAM(M,N) ((((M) << 3) | ((N) & 0x7)) & 0x7f)
int twsi_attach(device_t);
int twsi_detach(device_t);
#endif /* _TWSI_H_ */