freebsd-nq/module/zfs/spa.c
Matthew Ahrens 9e052db462 OpenZFS 9290 - device removal reduces redundancy of mirrors
Mirrors are supposed to provide redundancy in the face of whole-disk
failure and silent damage (e.g. some data on disk is not right, but ZFS
hasn't detected the whole device as being broken). However, the current
device removal implementation bypasses some of the mirror's redundancy.
Note that in no case is incorrect data returned, but we might get a
checksum error when we should have been able to find the right data.

There are two underlying problems:

1. When we remove a mirror device, we only read one side of the mirror.
Since we can't verify the checksum, this side may be silently bad, but
the good data is on the other side of the mirror (which we didn't read).
This can cause the removal to "bake in" the busted data – all copies of
the data in the new location are the same, busted version, while we left
the good version behind.

The fix for this is to read and copy both sides of the mirror. If the
old and new vdevs are mirrors, we will read both sides of the old
mirror, and write each copy to the corresponding side of the new mirror.
(If the old and new vdevs have a different number of children, we will
do this as best as possible.) Even though we aren't verifying checksums,
this ensures that as long as there's a good copy of the data, we'll have
a good copy after the removal, even if there's silent damage to one side
of the mirror. If we're removing a mirror that has some silent damage,
we'll have exactly the same damage in the new location (assuming that
the new location is also a mirror).

2. When we read from an indirect vdev that points to a mirror vdev, we
only consider one copy of the data. This can lead to reduced effective
redundancy, because we might read a bad copy of the data from one side
of the mirror, and not retry the other, good side of the mirror.

Note that the problem is not with the removal process, but rather after
the removal has completed (having copied correct data to both sides of
the mirror), if one side of the new mirror is silently damaged, we
encounter the problem when reading the relocated data via the indirect
vdev. Also note that the problem doesn't occur when ZFS knows that one
side of the mirror is bad, e.g. when a disk entirely fails or is
offlined.

The impact is that reads (from indirect vdevs that point to mirrors) may
return a checksum error even though the good data exists on one side of
the mirror, and scrub doesn't repair all data on the mirror (if some of
it is pointed to via an indirect vdev).

The fix for this is complicated by "split blocks" - one logical block
may be split into two (or more) pieces with each piece moved to a
different new location. In this case we need to read all versions of
each split (one from each side of the mirror), and figure out which
combination of versions results in the correct checksum, and then repair
the incorrect versions.

This ensures that we supply the same redundancy whether you use device
removal or not. For example, if a mirror has small silent errors on all
of its children, we can still reconstruct the correct data, as long as
those errors are at sufficiently-separated offsets (specifically,
separated by the largest block size - default of 128KB, but up to 16MB).

Porting notes:

* A new indirect vdev check was moved from dsl_scan_needs_resilver_cb()
  to dsl_scan_needs_resilver(), which was added to ZoL as part of the
  sequential scrub work.

* Passed NULL for zfs_ereport_post_checksum()'s zbookmark_phys_t
  parameter.  The extra parameter is unique to ZoL.

* When posting indirect checksum errors the ABD can be passed directly,
  zfs_ereport_post_checksum() is not yet ABD-aware in OpenZFS.

Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Tim Chase <tim@chase2k.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Ported-by: Tim Chase <tim@chase2k.com>

OpenZFS-issue: https://illumos.org/issues/9290
OpenZFS-commit: https://github.com/openzfs/openzfs/pull/591
Closes #6900
2018-04-14 12:21:39 -07:00

7259 lines
197 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2017 by Delphix. All rights reserved.
* Copyright (c) 2015, Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2013, 2014, Nexenta Systems, Inc. All rights reserved.
* Copyright (c) 2014 Spectra Logic Corporation, All rights reserved.
* Copyright 2013 Saso Kiselkov. All rights reserved.
* Copyright (c) 2014 Integros [integros.com]
* Copyright 2016 Toomas Soome <tsoome@me.com>
* Copyright (c) 2016 Actifio, Inc. All rights reserved.
* Copyright (c) 2017 Datto Inc.
* Copyright 2017 Joyent, Inc.
*/
/*
* SPA: Storage Pool Allocator
*
* This file contains all the routines used when modifying on-disk SPA state.
* This includes opening, importing, destroying, exporting a pool, and syncing a
* pool.
*/
#include <sys/zfs_context.h>
#include <sys/fm/fs/zfs.h>
#include <sys/spa_impl.h>
#include <sys/zio.h>
#include <sys/zio_checksum.h>
#include <sys/dmu.h>
#include <sys/dmu_tx.h>
#include <sys/zap.h>
#include <sys/zil.h>
#include <sys/ddt.h>
#include <sys/vdev_impl.h>
#include <sys/vdev_removal.h>
#include <sys/vdev_indirect_mapping.h>
#include <sys/vdev_indirect_births.h>
#include <sys/vdev_disk.h>
#include <sys/metaslab.h>
#include <sys/metaslab_impl.h>
#include <sys/mmp.h>
#include <sys/uberblock_impl.h>
#include <sys/txg.h>
#include <sys/avl.h>
#include <sys/bpobj.h>
#include <sys/dmu_traverse.h>
#include <sys/dmu_objset.h>
#include <sys/unique.h>
#include <sys/dsl_pool.h>
#include <sys/dsl_dataset.h>
#include <sys/dsl_dir.h>
#include <sys/dsl_prop.h>
#include <sys/dsl_synctask.h>
#include <sys/fs/zfs.h>
#include <sys/arc.h>
#include <sys/callb.h>
#include <sys/systeminfo.h>
#include <sys/spa_boot.h>
#include <sys/zfs_ioctl.h>
#include <sys/dsl_scan.h>
#include <sys/zfeature.h>
#include <sys/dsl_destroy.h>
#include <sys/zvol.h>
#ifdef _KERNEL
#include <sys/fm/protocol.h>
#include <sys/fm/util.h>
#include <sys/bootprops.h>
#include <sys/callb.h>
#include <sys/cpupart.h>
#include <sys/pool.h>
#include <sys/sysdc.h>
#include <sys/zone.h>
#endif /* _KERNEL */
#include "zfs_prop.h"
#include "zfs_comutil.h"
/*
* The interval, in seconds, at which failed configuration cache file writes
* should be retried.
*/
int zfs_ccw_retry_interval = 300;
typedef enum zti_modes {
ZTI_MODE_FIXED, /* value is # of threads (min 1) */
ZTI_MODE_BATCH, /* cpu-intensive; value is ignored */
ZTI_MODE_NULL, /* don't create a taskq */
ZTI_NMODES
} zti_modes_t;
#define ZTI_P(n, q) { ZTI_MODE_FIXED, (n), (q) }
#define ZTI_PCT(n) { ZTI_MODE_ONLINE_PERCENT, (n), 1 }
#define ZTI_BATCH { ZTI_MODE_BATCH, 0, 1 }
#define ZTI_NULL { ZTI_MODE_NULL, 0, 0 }
#define ZTI_N(n) ZTI_P(n, 1)
#define ZTI_ONE ZTI_N(1)
typedef struct zio_taskq_info {
zti_modes_t zti_mode;
uint_t zti_value;
uint_t zti_count;
} zio_taskq_info_t;
static const char *const zio_taskq_types[ZIO_TASKQ_TYPES] = {
"iss", "iss_h", "int", "int_h"
};
/*
* This table defines the taskq settings for each ZFS I/O type. When
* initializing a pool, we use this table to create an appropriately sized
* taskq. Some operations are low volume and therefore have a small, static
* number of threads assigned to their taskqs using the ZTI_N(#) or ZTI_ONE
* macros. Other operations process a large amount of data; the ZTI_BATCH
* macro causes us to create a taskq oriented for throughput. Some operations
* are so high frequency and short-lived that the taskq itself can become a a
* point of lock contention. The ZTI_P(#, #) macro indicates that we need an
* additional degree of parallelism specified by the number of threads per-
* taskq and the number of taskqs; when dispatching an event in this case, the
* particular taskq is chosen at random.
*
* The different taskq priorities are to handle the different contexts (issue
* and interrupt) and then to reserve threads for ZIO_PRIORITY_NOW I/Os that
* need to be handled with minimum delay.
*/
const zio_taskq_info_t zio_taskqs[ZIO_TYPES][ZIO_TASKQ_TYPES] = {
/* ISSUE ISSUE_HIGH INTR INTR_HIGH */
{ ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* NULL */
{ ZTI_N(8), ZTI_NULL, ZTI_P(12, 8), ZTI_NULL }, /* READ */
{ ZTI_BATCH, ZTI_N(5), ZTI_P(12, 8), ZTI_N(5) }, /* WRITE */
{ ZTI_P(12, 8), ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* FREE */
{ ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* CLAIM */
{ ZTI_ONE, ZTI_NULL, ZTI_ONE, ZTI_NULL }, /* IOCTL */
};
static void spa_sync_version(void *arg, dmu_tx_t *tx);
static void spa_sync_props(void *arg, dmu_tx_t *tx);
static boolean_t spa_has_active_shared_spare(spa_t *spa);
static inline int spa_load_impl(spa_t *spa, uint64_t, nvlist_t *config,
spa_load_state_t state, spa_import_type_t type, boolean_t trust_config,
char **ereport);
static void spa_vdev_resilver_done(spa_t *spa);
uint_t zio_taskq_batch_pct = 75; /* 1 thread per cpu in pset */
id_t zio_taskq_psrset_bind = PS_NONE;
boolean_t zio_taskq_sysdc = B_TRUE; /* use SDC scheduling class */
uint_t zio_taskq_basedc = 80; /* base duty cycle */
boolean_t spa_create_process = B_TRUE; /* no process ==> no sysdc */
/*
* This (illegal) pool name is used when temporarily importing a spa_t in order
* to get the vdev stats associated with the imported devices.
*/
#define TRYIMPORT_NAME "$import"
/*
* ==========================================================================
* SPA properties routines
* ==========================================================================
*/
/*
* Add a (source=src, propname=propval) list to an nvlist.
*/
static void
spa_prop_add_list(nvlist_t *nvl, zpool_prop_t prop, char *strval,
uint64_t intval, zprop_source_t src)
{
const char *propname = zpool_prop_to_name(prop);
nvlist_t *propval;
VERIFY(nvlist_alloc(&propval, NV_UNIQUE_NAME, KM_SLEEP) == 0);
VERIFY(nvlist_add_uint64(propval, ZPROP_SOURCE, src) == 0);
if (strval != NULL)
VERIFY(nvlist_add_string(propval, ZPROP_VALUE, strval) == 0);
else
VERIFY(nvlist_add_uint64(propval, ZPROP_VALUE, intval) == 0);
VERIFY(nvlist_add_nvlist(nvl, propname, propval) == 0);
nvlist_free(propval);
}
/*
* Get property values from the spa configuration.
*/
static void
spa_prop_get_config(spa_t *spa, nvlist_t **nvp)
{
vdev_t *rvd = spa->spa_root_vdev;
dsl_pool_t *pool = spa->spa_dsl_pool;
uint64_t size, alloc, cap, version;
const zprop_source_t src = ZPROP_SRC_NONE;
spa_config_dirent_t *dp;
metaslab_class_t *mc = spa_normal_class(spa);
ASSERT(MUTEX_HELD(&spa->spa_props_lock));
if (rvd != NULL) {
alloc = metaslab_class_get_alloc(spa_normal_class(spa));
size = metaslab_class_get_space(spa_normal_class(spa));
spa_prop_add_list(*nvp, ZPOOL_PROP_NAME, spa_name(spa), 0, src);
spa_prop_add_list(*nvp, ZPOOL_PROP_SIZE, NULL, size, src);
spa_prop_add_list(*nvp, ZPOOL_PROP_ALLOCATED, NULL, alloc, src);
spa_prop_add_list(*nvp, ZPOOL_PROP_FREE, NULL,
size - alloc, src);
spa_prop_add_list(*nvp, ZPOOL_PROP_FRAGMENTATION, NULL,
metaslab_class_fragmentation(mc), src);
spa_prop_add_list(*nvp, ZPOOL_PROP_EXPANDSZ, NULL,
metaslab_class_expandable_space(mc), src);
spa_prop_add_list(*nvp, ZPOOL_PROP_READONLY, NULL,
(spa_mode(spa) == FREAD), src);
cap = (size == 0) ? 0 : (alloc * 100 / size);
spa_prop_add_list(*nvp, ZPOOL_PROP_CAPACITY, NULL, cap, src);
spa_prop_add_list(*nvp, ZPOOL_PROP_DEDUPRATIO, NULL,
ddt_get_pool_dedup_ratio(spa), src);
spa_prop_add_list(*nvp, ZPOOL_PROP_HEALTH, NULL,
rvd->vdev_state, src);
version = spa_version(spa);
if (version == zpool_prop_default_numeric(ZPOOL_PROP_VERSION)) {
spa_prop_add_list(*nvp, ZPOOL_PROP_VERSION, NULL,
version, ZPROP_SRC_DEFAULT);
} else {
spa_prop_add_list(*nvp, ZPOOL_PROP_VERSION, NULL,
version, ZPROP_SRC_LOCAL);
}
}
if (pool != NULL) {
/*
* The $FREE directory was introduced in SPA_VERSION_DEADLISTS,
* when opening pools before this version freedir will be NULL.
*/
if (pool->dp_free_dir != NULL) {
spa_prop_add_list(*nvp, ZPOOL_PROP_FREEING, NULL,
dsl_dir_phys(pool->dp_free_dir)->dd_used_bytes,
src);
} else {
spa_prop_add_list(*nvp, ZPOOL_PROP_FREEING,
NULL, 0, src);
}
if (pool->dp_leak_dir != NULL) {
spa_prop_add_list(*nvp, ZPOOL_PROP_LEAKED, NULL,
dsl_dir_phys(pool->dp_leak_dir)->dd_used_bytes,
src);
} else {
spa_prop_add_list(*nvp, ZPOOL_PROP_LEAKED,
NULL, 0, src);
}
}
spa_prop_add_list(*nvp, ZPOOL_PROP_GUID, NULL, spa_guid(spa), src);
if (spa->spa_comment != NULL) {
spa_prop_add_list(*nvp, ZPOOL_PROP_COMMENT, spa->spa_comment,
0, ZPROP_SRC_LOCAL);
}
if (spa->spa_root != NULL)
spa_prop_add_list(*nvp, ZPOOL_PROP_ALTROOT, spa->spa_root,
0, ZPROP_SRC_LOCAL);
if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_BLOCKS)) {
spa_prop_add_list(*nvp, ZPOOL_PROP_MAXBLOCKSIZE, NULL,
MIN(zfs_max_recordsize, SPA_MAXBLOCKSIZE), ZPROP_SRC_NONE);
} else {
spa_prop_add_list(*nvp, ZPOOL_PROP_MAXBLOCKSIZE, NULL,
SPA_OLD_MAXBLOCKSIZE, ZPROP_SRC_NONE);
}
if (spa_feature_is_enabled(spa, SPA_FEATURE_LARGE_DNODE)) {
spa_prop_add_list(*nvp, ZPOOL_PROP_MAXDNODESIZE, NULL,
DNODE_MAX_SIZE, ZPROP_SRC_NONE);
} else {
spa_prop_add_list(*nvp, ZPOOL_PROP_MAXDNODESIZE, NULL,
DNODE_MIN_SIZE, ZPROP_SRC_NONE);
}
if ((dp = list_head(&spa->spa_config_list)) != NULL) {
if (dp->scd_path == NULL) {
spa_prop_add_list(*nvp, ZPOOL_PROP_CACHEFILE,
"none", 0, ZPROP_SRC_LOCAL);
} else if (strcmp(dp->scd_path, spa_config_path) != 0) {
spa_prop_add_list(*nvp, ZPOOL_PROP_CACHEFILE,
dp->scd_path, 0, ZPROP_SRC_LOCAL);
}
}
}
/*
* Get zpool property values.
*/
int
spa_prop_get(spa_t *spa, nvlist_t **nvp)
{
objset_t *mos = spa->spa_meta_objset;
zap_cursor_t zc;
zap_attribute_t za;
int err;
err = nvlist_alloc(nvp, NV_UNIQUE_NAME, KM_SLEEP);
if (err)
return (err);
mutex_enter(&spa->spa_props_lock);
/*
* Get properties from the spa config.
*/
spa_prop_get_config(spa, nvp);
/* If no pool property object, no more prop to get. */
if (mos == NULL || spa->spa_pool_props_object == 0) {
mutex_exit(&spa->spa_props_lock);
goto out;
}
/*
* Get properties from the MOS pool property object.
*/
for (zap_cursor_init(&zc, mos, spa->spa_pool_props_object);
(err = zap_cursor_retrieve(&zc, &za)) == 0;
zap_cursor_advance(&zc)) {
uint64_t intval = 0;
char *strval = NULL;
zprop_source_t src = ZPROP_SRC_DEFAULT;
zpool_prop_t prop;
if ((prop = zpool_name_to_prop(za.za_name)) == ZPOOL_PROP_INVAL)
continue;
switch (za.za_integer_length) {
case 8:
/* integer property */
if (za.za_first_integer !=
zpool_prop_default_numeric(prop))
src = ZPROP_SRC_LOCAL;
if (prop == ZPOOL_PROP_BOOTFS) {
dsl_pool_t *dp;
dsl_dataset_t *ds = NULL;
dp = spa_get_dsl(spa);
dsl_pool_config_enter(dp, FTAG);
if ((err = dsl_dataset_hold_obj(dp,
za.za_first_integer, FTAG, &ds))) {
dsl_pool_config_exit(dp, FTAG);
break;
}
strval = kmem_alloc(ZFS_MAX_DATASET_NAME_LEN,
KM_SLEEP);
dsl_dataset_name(ds, strval);
dsl_dataset_rele(ds, FTAG);
dsl_pool_config_exit(dp, FTAG);
} else {
strval = NULL;
intval = za.za_first_integer;
}
spa_prop_add_list(*nvp, prop, strval, intval, src);
if (strval != NULL)
kmem_free(strval, ZFS_MAX_DATASET_NAME_LEN);
break;
case 1:
/* string property */
strval = kmem_alloc(za.za_num_integers, KM_SLEEP);
err = zap_lookup(mos, spa->spa_pool_props_object,
za.za_name, 1, za.za_num_integers, strval);
if (err) {
kmem_free(strval, za.za_num_integers);
break;
}
spa_prop_add_list(*nvp, prop, strval, 0, src);
kmem_free(strval, za.za_num_integers);
break;
default:
break;
}
}
zap_cursor_fini(&zc);
mutex_exit(&spa->spa_props_lock);
out:
if (err && err != ENOENT) {
nvlist_free(*nvp);
*nvp = NULL;
return (err);
}
return (0);
}
/*
* Validate the given pool properties nvlist and modify the list
* for the property values to be set.
*/
static int
spa_prop_validate(spa_t *spa, nvlist_t *props)
{
nvpair_t *elem;
int error = 0, reset_bootfs = 0;
uint64_t objnum = 0;
boolean_t has_feature = B_FALSE;
elem = NULL;
while ((elem = nvlist_next_nvpair(props, elem)) != NULL) {
uint64_t intval;
char *strval, *slash, *check, *fname;
const char *propname = nvpair_name(elem);
zpool_prop_t prop = zpool_name_to_prop(propname);
switch (prop) {
case ZPOOL_PROP_INVAL:
if (!zpool_prop_feature(propname)) {
error = SET_ERROR(EINVAL);
break;
}
/*
* Sanitize the input.
*/
if (nvpair_type(elem) != DATA_TYPE_UINT64) {
error = SET_ERROR(EINVAL);
break;
}
if (nvpair_value_uint64(elem, &intval) != 0) {
error = SET_ERROR(EINVAL);
break;
}
if (intval != 0) {
error = SET_ERROR(EINVAL);
break;
}
fname = strchr(propname, '@') + 1;
if (zfeature_lookup_name(fname, NULL) != 0) {
error = SET_ERROR(EINVAL);
break;
}
has_feature = B_TRUE;
break;
case ZPOOL_PROP_VERSION:
error = nvpair_value_uint64(elem, &intval);
if (!error &&
(intval < spa_version(spa) ||
intval > SPA_VERSION_BEFORE_FEATURES ||
has_feature))
error = SET_ERROR(EINVAL);
break;
case ZPOOL_PROP_DELEGATION:
case ZPOOL_PROP_AUTOREPLACE:
case ZPOOL_PROP_LISTSNAPS:
case ZPOOL_PROP_AUTOEXPAND:
error = nvpair_value_uint64(elem, &intval);
if (!error && intval > 1)
error = SET_ERROR(EINVAL);
break;
case ZPOOL_PROP_MULTIHOST:
error = nvpair_value_uint64(elem, &intval);
if (!error && intval > 1)
error = SET_ERROR(EINVAL);
if (!error && !spa_get_hostid())
error = SET_ERROR(ENOTSUP);
break;
case ZPOOL_PROP_BOOTFS:
/*
* If the pool version is less than SPA_VERSION_BOOTFS,
* or the pool is still being created (version == 0),
* the bootfs property cannot be set.
*/
if (spa_version(spa) < SPA_VERSION_BOOTFS) {
error = SET_ERROR(ENOTSUP);
break;
}
/*
* Make sure the vdev config is bootable
*/
if (!vdev_is_bootable(spa->spa_root_vdev)) {
error = SET_ERROR(ENOTSUP);
break;
}
reset_bootfs = 1;
error = nvpair_value_string(elem, &strval);
if (!error) {
objset_t *os;
uint64_t propval;
if (strval == NULL || strval[0] == '\0') {
objnum = zpool_prop_default_numeric(
ZPOOL_PROP_BOOTFS);
break;
}
error = dmu_objset_hold(strval, FTAG, &os);
if (error)
break;
/*
* Must be ZPL, and its property settings
* must be supported by GRUB (compression
* is not gzip, and large blocks or large
* dnodes are not used).
*/
if (dmu_objset_type(os) != DMU_OST_ZFS) {
error = SET_ERROR(ENOTSUP);
} else if ((error =
dsl_prop_get_int_ds(dmu_objset_ds(os),
zfs_prop_to_name(ZFS_PROP_COMPRESSION),
&propval)) == 0 &&
!BOOTFS_COMPRESS_VALID(propval)) {
error = SET_ERROR(ENOTSUP);
} else if ((error =
dsl_prop_get_int_ds(dmu_objset_ds(os),
zfs_prop_to_name(ZFS_PROP_DNODESIZE),
&propval)) == 0 &&
propval != ZFS_DNSIZE_LEGACY) {
error = SET_ERROR(ENOTSUP);
} else {
objnum = dmu_objset_id(os);
}
dmu_objset_rele(os, FTAG);
}
break;
case ZPOOL_PROP_FAILUREMODE:
error = nvpair_value_uint64(elem, &intval);
if (!error && intval > ZIO_FAILURE_MODE_PANIC)
error = SET_ERROR(EINVAL);
/*
* This is a special case which only occurs when
* the pool has completely failed. This allows
* the user to change the in-core failmode property
* without syncing it out to disk (I/Os might
* currently be blocked). We do this by returning
* EIO to the caller (spa_prop_set) to trick it
* into thinking we encountered a property validation
* error.
*/
if (!error && spa_suspended(spa)) {
spa->spa_failmode = intval;
error = SET_ERROR(EIO);
}
break;
case ZPOOL_PROP_CACHEFILE:
if ((error = nvpair_value_string(elem, &strval)) != 0)
break;
if (strval[0] == '\0')
break;
if (strcmp(strval, "none") == 0)
break;
if (strval[0] != '/') {
error = SET_ERROR(EINVAL);
break;
}
slash = strrchr(strval, '/');
ASSERT(slash != NULL);
if (slash[1] == '\0' || strcmp(slash, "/.") == 0 ||
strcmp(slash, "/..") == 0)
error = SET_ERROR(EINVAL);
break;
case ZPOOL_PROP_COMMENT:
if ((error = nvpair_value_string(elem, &strval)) != 0)
break;
for (check = strval; *check != '\0'; check++) {
if (!isprint(*check)) {
error = SET_ERROR(EINVAL);
break;
}
}
if (strlen(strval) > ZPROP_MAX_COMMENT)
error = SET_ERROR(E2BIG);
break;
case ZPOOL_PROP_DEDUPDITTO:
if (spa_version(spa) < SPA_VERSION_DEDUP)
error = SET_ERROR(ENOTSUP);
else
error = nvpair_value_uint64(elem, &intval);
if (error == 0 &&
intval != 0 && intval < ZIO_DEDUPDITTO_MIN)
error = SET_ERROR(EINVAL);
break;
default:
break;
}
if (error)
break;
}
if (!error && reset_bootfs) {
error = nvlist_remove(props,
zpool_prop_to_name(ZPOOL_PROP_BOOTFS), DATA_TYPE_STRING);
if (!error) {
error = nvlist_add_uint64(props,
zpool_prop_to_name(ZPOOL_PROP_BOOTFS), objnum);
}
}
return (error);
}
void
spa_configfile_set(spa_t *spa, nvlist_t *nvp, boolean_t need_sync)
{
char *cachefile;
spa_config_dirent_t *dp;
if (nvlist_lookup_string(nvp, zpool_prop_to_name(ZPOOL_PROP_CACHEFILE),
&cachefile) != 0)
return;
dp = kmem_alloc(sizeof (spa_config_dirent_t),
KM_SLEEP);
if (cachefile[0] == '\0')
dp->scd_path = spa_strdup(spa_config_path);
else if (strcmp(cachefile, "none") == 0)
dp->scd_path = NULL;
else
dp->scd_path = spa_strdup(cachefile);
list_insert_head(&spa->spa_config_list, dp);
if (need_sync)
spa_async_request(spa, SPA_ASYNC_CONFIG_UPDATE);
}
int
spa_prop_set(spa_t *spa, nvlist_t *nvp)
{
int error;
nvpair_t *elem = NULL;
boolean_t need_sync = B_FALSE;
if ((error = spa_prop_validate(spa, nvp)) != 0)
return (error);
while ((elem = nvlist_next_nvpair(nvp, elem)) != NULL) {
zpool_prop_t prop = zpool_name_to_prop(nvpair_name(elem));
if (prop == ZPOOL_PROP_CACHEFILE ||
prop == ZPOOL_PROP_ALTROOT ||
prop == ZPOOL_PROP_READONLY)
continue;
if (prop == ZPOOL_PROP_VERSION || prop == ZPOOL_PROP_INVAL) {
uint64_t ver;
if (prop == ZPOOL_PROP_VERSION) {
VERIFY(nvpair_value_uint64(elem, &ver) == 0);
} else {
ASSERT(zpool_prop_feature(nvpair_name(elem)));
ver = SPA_VERSION_FEATURES;
need_sync = B_TRUE;
}
/* Save time if the version is already set. */
if (ver == spa_version(spa))
continue;
/*
* In addition to the pool directory object, we might
* create the pool properties object, the features for
* read object, the features for write object, or the
* feature descriptions object.
*/
error = dsl_sync_task(spa->spa_name, NULL,
spa_sync_version, &ver,
6, ZFS_SPACE_CHECK_RESERVED);
if (error)
return (error);
continue;
}
need_sync = B_TRUE;
break;
}
if (need_sync) {
return (dsl_sync_task(spa->spa_name, NULL, spa_sync_props,
nvp, 6, ZFS_SPACE_CHECK_RESERVED));
}
return (0);
}
/*
* If the bootfs property value is dsobj, clear it.
*/
void
spa_prop_clear_bootfs(spa_t *spa, uint64_t dsobj, dmu_tx_t *tx)
{
if (spa->spa_bootfs == dsobj && spa->spa_pool_props_object != 0) {
VERIFY(zap_remove(spa->spa_meta_objset,
spa->spa_pool_props_object,
zpool_prop_to_name(ZPOOL_PROP_BOOTFS), tx) == 0);
spa->spa_bootfs = 0;
}
}
/*ARGSUSED*/
static int
spa_change_guid_check(void *arg, dmu_tx_t *tx)
{
ASSERTV(uint64_t *newguid = arg);
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
vdev_t *rvd = spa->spa_root_vdev;
uint64_t vdev_state;
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
vdev_state = rvd->vdev_state;
spa_config_exit(spa, SCL_STATE, FTAG);
if (vdev_state != VDEV_STATE_HEALTHY)
return (SET_ERROR(ENXIO));
ASSERT3U(spa_guid(spa), !=, *newguid);
return (0);
}
static void
spa_change_guid_sync(void *arg, dmu_tx_t *tx)
{
uint64_t *newguid = arg;
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
uint64_t oldguid;
vdev_t *rvd = spa->spa_root_vdev;
oldguid = spa_guid(spa);
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
rvd->vdev_guid = *newguid;
rvd->vdev_guid_sum += (*newguid - oldguid);
vdev_config_dirty(rvd);
spa_config_exit(spa, SCL_STATE, FTAG);
spa_history_log_internal(spa, "guid change", tx, "old=%llu new=%llu",
oldguid, *newguid);
}
/*
* Change the GUID for the pool. This is done so that we can later
* re-import a pool built from a clone of our own vdevs. We will modify
* the root vdev's guid, our own pool guid, and then mark all of our
* vdevs dirty. Note that we must make sure that all our vdevs are
* online when we do this, or else any vdevs that weren't present
* would be orphaned from our pool. We are also going to issue a
* sysevent to update any watchers.
*/
int
spa_change_guid(spa_t *spa)
{
int error;
uint64_t guid;
mutex_enter(&spa->spa_vdev_top_lock);
mutex_enter(&spa_namespace_lock);
guid = spa_generate_guid(NULL);
error = dsl_sync_task(spa->spa_name, spa_change_guid_check,
spa_change_guid_sync, &guid, 5, ZFS_SPACE_CHECK_RESERVED);
if (error == 0) {
spa_write_cachefile(spa, B_FALSE, B_TRUE);
spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_REGUID);
}
mutex_exit(&spa_namespace_lock);
mutex_exit(&spa->spa_vdev_top_lock);
return (error);
}
/*
* ==========================================================================
* SPA state manipulation (open/create/destroy/import/export)
* ==========================================================================
*/
static int
spa_error_entry_compare(const void *a, const void *b)
{
const spa_error_entry_t *sa = (const spa_error_entry_t *)a;
const spa_error_entry_t *sb = (const spa_error_entry_t *)b;
int ret;
ret = memcmp(&sa->se_bookmark, &sb->se_bookmark,
sizeof (zbookmark_phys_t));
return (AVL_ISIGN(ret));
}
/*
* Utility function which retrieves copies of the current logs and
* re-initializes them in the process.
*/
void
spa_get_errlists(spa_t *spa, avl_tree_t *last, avl_tree_t *scrub)
{
ASSERT(MUTEX_HELD(&spa->spa_errlist_lock));
bcopy(&spa->spa_errlist_last, last, sizeof (avl_tree_t));
bcopy(&spa->spa_errlist_scrub, scrub, sizeof (avl_tree_t));
avl_create(&spa->spa_errlist_scrub,
spa_error_entry_compare, sizeof (spa_error_entry_t),
offsetof(spa_error_entry_t, se_avl));
avl_create(&spa->spa_errlist_last,
spa_error_entry_compare, sizeof (spa_error_entry_t),
offsetof(spa_error_entry_t, se_avl));
}
static void
spa_taskqs_init(spa_t *spa, zio_type_t t, zio_taskq_type_t q)
{
const zio_taskq_info_t *ztip = &zio_taskqs[t][q];
enum zti_modes mode = ztip->zti_mode;
uint_t value = ztip->zti_value;
uint_t count = ztip->zti_count;
spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q];
char name[32];
uint_t flags = 0;
boolean_t batch = B_FALSE;
if (mode == ZTI_MODE_NULL) {
tqs->stqs_count = 0;
tqs->stqs_taskq = NULL;
return;
}
ASSERT3U(count, >, 0);
tqs->stqs_count = count;
tqs->stqs_taskq = kmem_alloc(count * sizeof (taskq_t *), KM_SLEEP);
switch (mode) {
case ZTI_MODE_FIXED:
ASSERT3U(value, >=, 1);
value = MAX(value, 1);
flags |= TASKQ_DYNAMIC;
break;
case ZTI_MODE_BATCH:
batch = B_TRUE;
flags |= TASKQ_THREADS_CPU_PCT;
value = MIN(zio_taskq_batch_pct, 100);
break;
default:
panic("unrecognized mode for %s_%s taskq (%u:%u) in "
"spa_activate()",
zio_type_name[t], zio_taskq_types[q], mode, value);
break;
}
for (uint_t i = 0; i < count; i++) {
taskq_t *tq;
if (count > 1) {
(void) snprintf(name, sizeof (name), "%s_%s_%u",
zio_type_name[t], zio_taskq_types[q], i);
} else {
(void) snprintf(name, sizeof (name), "%s_%s",
zio_type_name[t], zio_taskq_types[q]);
}
if (zio_taskq_sysdc && spa->spa_proc != &p0) {
if (batch)
flags |= TASKQ_DC_BATCH;
tq = taskq_create_sysdc(name, value, 50, INT_MAX,
spa->spa_proc, zio_taskq_basedc, flags);
} else {
pri_t pri = maxclsyspri;
/*
* The write issue taskq can be extremely CPU
* intensive. Run it at slightly less important
* priority than the other taskqs. Under Linux this
* means incrementing the priority value on platforms
* like illumos it should be decremented.
*/
if (t == ZIO_TYPE_WRITE && q == ZIO_TASKQ_ISSUE)
pri++;
tq = taskq_create_proc(name, value, pri, 50,
INT_MAX, spa->spa_proc, flags);
}
tqs->stqs_taskq[i] = tq;
}
}
static void
spa_taskqs_fini(spa_t *spa, zio_type_t t, zio_taskq_type_t q)
{
spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q];
if (tqs->stqs_taskq == NULL) {
ASSERT3U(tqs->stqs_count, ==, 0);
return;
}
for (uint_t i = 0; i < tqs->stqs_count; i++) {
ASSERT3P(tqs->stqs_taskq[i], !=, NULL);
taskq_destroy(tqs->stqs_taskq[i]);
}
kmem_free(tqs->stqs_taskq, tqs->stqs_count * sizeof (taskq_t *));
tqs->stqs_taskq = NULL;
}
/*
* Dispatch a task to the appropriate taskq for the ZFS I/O type and priority.
* Note that a type may have multiple discrete taskqs to avoid lock contention
* on the taskq itself. In that case we choose which taskq at random by using
* the low bits of gethrtime().
*/
void
spa_taskq_dispatch_ent(spa_t *spa, zio_type_t t, zio_taskq_type_t q,
task_func_t *func, void *arg, uint_t flags, taskq_ent_t *ent)
{
spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q];
taskq_t *tq;
ASSERT3P(tqs->stqs_taskq, !=, NULL);
ASSERT3U(tqs->stqs_count, !=, 0);
if (tqs->stqs_count == 1) {
tq = tqs->stqs_taskq[0];
} else {
tq = tqs->stqs_taskq[((uint64_t)gethrtime()) % tqs->stqs_count];
}
taskq_dispatch_ent(tq, func, arg, flags, ent);
}
/*
* Same as spa_taskq_dispatch_ent() but block on the task until completion.
*/
void
spa_taskq_dispatch_sync(spa_t *spa, zio_type_t t, zio_taskq_type_t q,
task_func_t *func, void *arg, uint_t flags)
{
spa_taskqs_t *tqs = &spa->spa_zio_taskq[t][q];
taskq_t *tq;
taskqid_t id;
ASSERT3P(tqs->stqs_taskq, !=, NULL);
ASSERT3U(tqs->stqs_count, !=, 0);
if (tqs->stqs_count == 1) {
tq = tqs->stqs_taskq[0];
} else {
tq = tqs->stqs_taskq[((uint64_t)gethrtime()) % tqs->stqs_count];
}
id = taskq_dispatch(tq, func, arg, flags);
if (id)
taskq_wait_id(tq, id);
}
static void
spa_create_zio_taskqs(spa_t *spa)
{
for (int t = 0; t < ZIO_TYPES; t++) {
for (int q = 0; q < ZIO_TASKQ_TYPES; q++) {
spa_taskqs_init(spa, t, q);
}
}
}
/*
* Disabled until spa_thread() can be adapted for Linux.
*/
#undef HAVE_SPA_THREAD
#if defined(_KERNEL) && defined(HAVE_SPA_THREAD)
static void
spa_thread(void *arg)
{
callb_cpr_t cprinfo;
spa_t *spa = arg;
user_t *pu = PTOU(curproc);
CALLB_CPR_INIT(&cprinfo, &spa->spa_proc_lock, callb_generic_cpr,
spa->spa_name);
ASSERT(curproc != &p0);
(void) snprintf(pu->u_psargs, sizeof (pu->u_psargs),
"zpool-%s", spa->spa_name);
(void) strlcpy(pu->u_comm, pu->u_psargs, sizeof (pu->u_comm));
/* bind this thread to the requested psrset */
if (zio_taskq_psrset_bind != PS_NONE) {
pool_lock();
mutex_enter(&cpu_lock);
mutex_enter(&pidlock);
mutex_enter(&curproc->p_lock);
if (cpupart_bind_thread(curthread, zio_taskq_psrset_bind,
0, NULL, NULL) == 0) {
curthread->t_bind_pset = zio_taskq_psrset_bind;
} else {
cmn_err(CE_WARN,
"Couldn't bind process for zfs pool \"%s\" to "
"pset %d\n", spa->spa_name, zio_taskq_psrset_bind);
}
mutex_exit(&curproc->p_lock);
mutex_exit(&pidlock);
mutex_exit(&cpu_lock);
pool_unlock();
}
if (zio_taskq_sysdc) {
sysdc_thread_enter(curthread, 100, 0);
}
spa->spa_proc = curproc;
spa->spa_did = curthread->t_did;
spa_create_zio_taskqs(spa);
mutex_enter(&spa->spa_proc_lock);
ASSERT(spa->spa_proc_state == SPA_PROC_CREATED);
spa->spa_proc_state = SPA_PROC_ACTIVE;
cv_broadcast(&spa->spa_proc_cv);
CALLB_CPR_SAFE_BEGIN(&cprinfo);
while (spa->spa_proc_state == SPA_PROC_ACTIVE)
cv_wait(&spa->spa_proc_cv, &spa->spa_proc_lock);
CALLB_CPR_SAFE_END(&cprinfo, &spa->spa_proc_lock);
ASSERT(spa->spa_proc_state == SPA_PROC_DEACTIVATE);
spa->spa_proc_state = SPA_PROC_GONE;
spa->spa_proc = &p0;
cv_broadcast(&spa->spa_proc_cv);
CALLB_CPR_EXIT(&cprinfo); /* drops spa_proc_lock */
mutex_enter(&curproc->p_lock);
lwp_exit();
}
#endif
/*
* Activate an uninitialized pool.
*/
static void
spa_activate(spa_t *spa, int mode)
{
ASSERT(spa->spa_state == POOL_STATE_UNINITIALIZED);
spa->spa_state = POOL_STATE_ACTIVE;
spa->spa_mode = mode;
spa->spa_normal_class = metaslab_class_create(spa, zfs_metaslab_ops);
spa->spa_log_class = metaslab_class_create(spa, zfs_metaslab_ops);
/* Try to create a covering process */
mutex_enter(&spa->spa_proc_lock);
ASSERT(spa->spa_proc_state == SPA_PROC_NONE);
ASSERT(spa->spa_proc == &p0);
spa->spa_did = 0;
#ifdef HAVE_SPA_THREAD
/* Only create a process if we're going to be around a while. */
if (spa_create_process && strcmp(spa->spa_name, TRYIMPORT_NAME) != 0) {
if (newproc(spa_thread, (caddr_t)spa, syscid, maxclsyspri,
NULL, 0) == 0) {
spa->spa_proc_state = SPA_PROC_CREATED;
while (spa->spa_proc_state == SPA_PROC_CREATED) {
cv_wait(&spa->spa_proc_cv,
&spa->spa_proc_lock);
}
ASSERT(spa->spa_proc_state == SPA_PROC_ACTIVE);
ASSERT(spa->spa_proc != &p0);
ASSERT(spa->spa_did != 0);
} else {
#ifdef _KERNEL
cmn_err(CE_WARN,
"Couldn't create process for zfs pool \"%s\"\n",
spa->spa_name);
#endif
}
}
#endif /* HAVE_SPA_THREAD */
mutex_exit(&spa->spa_proc_lock);
/* If we didn't create a process, we need to create our taskqs. */
if (spa->spa_proc == &p0) {
spa_create_zio_taskqs(spa);
}
for (size_t i = 0; i < TXG_SIZE; i++)
spa->spa_txg_zio[i] = zio_root(spa, NULL, NULL, 0);
list_create(&spa->spa_config_dirty_list, sizeof (vdev_t),
offsetof(vdev_t, vdev_config_dirty_node));
list_create(&spa->spa_evicting_os_list, sizeof (objset_t),
offsetof(objset_t, os_evicting_node));
list_create(&spa->spa_state_dirty_list, sizeof (vdev_t),
offsetof(vdev_t, vdev_state_dirty_node));
txg_list_create(&spa->spa_vdev_txg_list, spa,
offsetof(struct vdev, vdev_txg_node));
avl_create(&spa->spa_errlist_scrub,
spa_error_entry_compare, sizeof (spa_error_entry_t),
offsetof(spa_error_entry_t, se_avl));
avl_create(&spa->spa_errlist_last,
spa_error_entry_compare, sizeof (spa_error_entry_t),
offsetof(spa_error_entry_t, se_avl));
spa_keystore_init(&spa->spa_keystore);
/*
* This taskq is used to perform zvol-minor-related tasks
* asynchronously. This has several advantages, including easy
* resolution of various deadlocks (zfsonlinux bug #3681).
*
* The taskq must be single threaded to ensure tasks are always
* processed in the order in which they were dispatched.
*
* A taskq per pool allows one to keep the pools independent.
* This way if one pool is suspended, it will not impact another.
*
* The preferred location to dispatch a zvol minor task is a sync
* task. In this context, there is easy access to the spa_t and minimal
* error handling is required because the sync task must succeed.
*/
spa->spa_zvol_taskq = taskq_create("z_zvol", 1, defclsyspri,
1, INT_MAX, 0);
/*
* Taskq dedicated to prefetcher threads: this is used to prevent the
* pool traverse code from monopolizing the global (and limited)
* system_taskq by inappropriately scheduling long running tasks on it.
*/
spa->spa_prefetch_taskq = taskq_create("z_prefetch", boot_ncpus,
defclsyspri, 1, INT_MAX, TASKQ_DYNAMIC);
/*
* The taskq to upgrade datasets in this pool. Currently used by
* feature SPA_FEATURE_USEROBJ_ACCOUNTING/SPA_FEATURE_PROJECT_QUOTA.
*/
spa->spa_upgrade_taskq = taskq_create("z_upgrade", boot_ncpus,
defclsyspri, 1, INT_MAX, TASKQ_DYNAMIC);
}
/*
* Opposite of spa_activate().
*/
static void
spa_deactivate(spa_t *spa)
{
ASSERT(spa->spa_sync_on == B_FALSE);
ASSERT(spa->spa_dsl_pool == NULL);
ASSERT(spa->spa_root_vdev == NULL);
ASSERT(spa->spa_async_zio_root == NULL);
ASSERT(spa->spa_state != POOL_STATE_UNINITIALIZED);
spa_evicting_os_wait(spa);
if (spa->spa_zvol_taskq) {
taskq_destroy(spa->spa_zvol_taskq);
spa->spa_zvol_taskq = NULL;
}
if (spa->spa_prefetch_taskq) {
taskq_destroy(spa->spa_prefetch_taskq);
spa->spa_prefetch_taskq = NULL;
}
if (spa->spa_upgrade_taskq) {
taskq_destroy(spa->spa_upgrade_taskq);
spa->spa_upgrade_taskq = NULL;
}
txg_list_destroy(&spa->spa_vdev_txg_list);
list_destroy(&spa->spa_config_dirty_list);
list_destroy(&spa->spa_evicting_os_list);
list_destroy(&spa->spa_state_dirty_list);
taskq_cancel_id(system_delay_taskq, spa->spa_deadman_tqid);
for (int t = 0; t < ZIO_TYPES; t++) {
for (int q = 0; q < ZIO_TASKQ_TYPES; q++) {
spa_taskqs_fini(spa, t, q);
}
}
for (size_t i = 0; i < TXG_SIZE; i++) {
ASSERT3P(spa->spa_txg_zio[i], !=, NULL);
VERIFY0(zio_wait(spa->spa_txg_zio[i]));
spa->spa_txg_zio[i] = NULL;
}
metaslab_class_destroy(spa->spa_normal_class);
spa->spa_normal_class = NULL;
metaslab_class_destroy(spa->spa_log_class);
spa->spa_log_class = NULL;
/*
* If this was part of an import or the open otherwise failed, we may
* still have errors left in the queues. Empty them just in case.
*/
spa_errlog_drain(spa);
avl_destroy(&spa->spa_errlist_scrub);
avl_destroy(&spa->spa_errlist_last);
spa_keystore_fini(&spa->spa_keystore);
spa->spa_state = POOL_STATE_UNINITIALIZED;
mutex_enter(&spa->spa_proc_lock);
if (spa->spa_proc_state != SPA_PROC_NONE) {
ASSERT(spa->spa_proc_state == SPA_PROC_ACTIVE);
spa->spa_proc_state = SPA_PROC_DEACTIVATE;
cv_broadcast(&spa->spa_proc_cv);
while (spa->spa_proc_state == SPA_PROC_DEACTIVATE) {
ASSERT(spa->spa_proc != &p0);
cv_wait(&spa->spa_proc_cv, &spa->spa_proc_lock);
}
ASSERT(spa->spa_proc_state == SPA_PROC_GONE);
spa->spa_proc_state = SPA_PROC_NONE;
}
ASSERT(spa->spa_proc == &p0);
mutex_exit(&spa->spa_proc_lock);
/*
* We want to make sure spa_thread() has actually exited the ZFS
* module, so that the module can't be unloaded out from underneath
* it.
*/
if (spa->spa_did != 0) {
thread_join(spa->spa_did);
spa->spa_did = 0;
}
}
/*
* Verify a pool configuration, and construct the vdev tree appropriately. This
* will create all the necessary vdevs in the appropriate layout, with each vdev
* in the CLOSED state. This will prep the pool before open/creation/import.
* All vdev validation is done by the vdev_alloc() routine.
*/
static int
spa_config_parse(spa_t *spa, vdev_t **vdp, nvlist_t *nv, vdev_t *parent,
uint_t id, int atype)
{
nvlist_t **child;
uint_t children;
int error;
if ((error = vdev_alloc(spa, vdp, nv, parent, id, atype)) != 0)
return (error);
if ((*vdp)->vdev_ops->vdev_op_leaf)
return (0);
error = nvlist_lookup_nvlist_array(nv, ZPOOL_CONFIG_CHILDREN,
&child, &children);
if (error == ENOENT)
return (0);
if (error) {
vdev_free(*vdp);
*vdp = NULL;
return (SET_ERROR(EINVAL));
}
for (int c = 0; c < children; c++) {
vdev_t *vd;
if ((error = spa_config_parse(spa, &vd, child[c], *vdp, c,
atype)) != 0) {
vdev_free(*vdp);
*vdp = NULL;
return (error);
}
}
ASSERT(*vdp != NULL);
return (0);
}
/*
* Opposite of spa_load().
*/
static void
spa_unload(spa_t *spa)
{
int i;
ASSERT(MUTEX_HELD(&spa_namespace_lock));
/*
* Stop async tasks.
*/
spa_async_suspend(spa);
/*
* Stop syncing.
*/
if (spa->spa_sync_on) {
txg_sync_stop(spa->spa_dsl_pool);
spa->spa_sync_on = B_FALSE;
}
/*
* Even though vdev_free() also calls vdev_metaslab_fini, we need
* to call it earlier, before we wait for async i/o to complete.
* This ensures that there is no async metaslab prefetching, by
* calling taskq_wait(mg_taskq).
*/
if (spa->spa_root_vdev != NULL) {
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
for (int c = 0; c < spa->spa_root_vdev->vdev_children; c++)
vdev_metaslab_fini(spa->spa_root_vdev->vdev_child[c]);
spa_config_exit(spa, SCL_ALL, FTAG);
}
if (spa->spa_mmp.mmp_thread)
mmp_thread_stop(spa);
/*
* Wait for any outstanding async I/O to complete.
*/
if (spa->spa_async_zio_root != NULL) {
for (int i = 0; i < max_ncpus; i++)
(void) zio_wait(spa->spa_async_zio_root[i]);
kmem_free(spa->spa_async_zio_root, max_ncpus * sizeof (void *));
spa->spa_async_zio_root = NULL;
}
if (spa->spa_vdev_removal != NULL) {
spa_vdev_removal_destroy(spa->spa_vdev_removal);
spa->spa_vdev_removal = NULL;
}
spa_condense_fini(spa);
bpobj_close(&spa->spa_deferred_bpobj);
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
/*
* Close all vdevs.
*/
if (spa->spa_root_vdev)
vdev_free(spa->spa_root_vdev);
ASSERT(spa->spa_root_vdev == NULL);
/*
* Close the dsl pool.
*/
if (spa->spa_dsl_pool) {
dsl_pool_close(spa->spa_dsl_pool);
spa->spa_dsl_pool = NULL;
spa->spa_meta_objset = NULL;
}
ddt_unload(spa);
/*
* Drop and purge level 2 cache
*/
spa_l2cache_drop(spa);
for (i = 0; i < spa->spa_spares.sav_count; i++)
vdev_free(spa->spa_spares.sav_vdevs[i]);
if (spa->spa_spares.sav_vdevs) {
kmem_free(spa->spa_spares.sav_vdevs,
spa->spa_spares.sav_count * sizeof (void *));
spa->spa_spares.sav_vdevs = NULL;
}
if (spa->spa_spares.sav_config) {
nvlist_free(spa->spa_spares.sav_config);
spa->spa_spares.sav_config = NULL;
}
spa->spa_spares.sav_count = 0;
for (i = 0; i < spa->spa_l2cache.sav_count; i++) {
vdev_clear_stats(spa->spa_l2cache.sav_vdevs[i]);
vdev_free(spa->spa_l2cache.sav_vdevs[i]);
}
if (spa->spa_l2cache.sav_vdevs) {
kmem_free(spa->spa_l2cache.sav_vdevs,
spa->spa_l2cache.sav_count * sizeof (void *));
spa->spa_l2cache.sav_vdevs = NULL;
}
if (spa->spa_l2cache.sav_config) {
nvlist_free(spa->spa_l2cache.sav_config);
spa->spa_l2cache.sav_config = NULL;
}
spa->spa_l2cache.sav_count = 0;
spa->spa_async_suspended = 0;
spa->spa_indirect_vdevs_loaded = B_FALSE;
if (spa->spa_comment != NULL) {
spa_strfree(spa->spa_comment);
spa->spa_comment = NULL;
}
spa_config_exit(spa, SCL_ALL, FTAG);
}
/*
* Load (or re-load) the current list of vdevs describing the active spares for
* this pool. When this is called, we have some form of basic information in
* 'spa_spares.sav_config'. We parse this into vdevs, try to open them, and
* then re-generate a more complete list including status information.
*/
void
spa_load_spares(spa_t *spa)
{
nvlist_t **spares;
uint_t nspares;
int i;
vdev_t *vd, *tvd;
ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL);
/*
* First, close and free any existing spare vdevs.
*/
for (i = 0; i < spa->spa_spares.sav_count; i++) {
vd = spa->spa_spares.sav_vdevs[i];
/* Undo the call to spa_activate() below */
if ((tvd = spa_lookup_by_guid(spa, vd->vdev_guid,
B_FALSE)) != NULL && tvd->vdev_isspare)
spa_spare_remove(tvd);
vdev_close(vd);
vdev_free(vd);
}
if (spa->spa_spares.sav_vdevs)
kmem_free(spa->spa_spares.sav_vdevs,
spa->spa_spares.sav_count * sizeof (void *));
if (spa->spa_spares.sav_config == NULL)
nspares = 0;
else
VERIFY(nvlist_lookup_nvlist_array(spa->spa_spares.sav_config,
ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0);
spa->spa_spares.sav_count = (int)nspares;
spa->spa_spares.sav_vdevs = NULL;
if (nspares == 0)
return;
/*
* Construct the array of vdevs, opening them to get status in the
* process. For each spare, there is potentially two different vdev_t
* structures associated with it: one in the list of spares (used only
* for basic validation purposes) and one in the active vdev
* configuration (if it's spared in). During this phase we open and
* validate each vdev on the spare list. If the vdev also exists in the
* active configuration, then we also mark this vdev as an active spare.
*/
spa->spa_spares.sav_vdevs = kmem_zalloc(nspares * sizeof (void *),
KM_SLEEP);
for (i = 0; i < spa->spa_spares.sav_count; i++) {
VERIFY(spa_config_parse(spa, &vd, spares[i], NULL, 0,
VDEV_ALLOC_SPARE) == 0);
ASSERT(vd != NULL);
spa->spa_spares.sav_vdevs[i] = vd;
if ((tvd = spa_lookup_by_guid(spa, vd->vdev_guid,
B_FALSE)) != NULL) {
if (!tvd->vdev_isspare)
spa_spare_add(tvd);
/*
* We only mark the spare active if we were successfully
* able to load the vdev. Otherwise, importing a pool
* with a bad active spare would result in strange
* behavior, because multiple pool would think the spare
* is actively in use.
*
* There is a vulnerability here to an equally bizarre
* circumstance, where a dead active spare is later
* brought back to life (onlined or otherwise). Given
* the rarity of this scenario, and the extra complexity
* it adds, we ignore the possibility.
*/
if (!vdev_is_dead(tvd))
spa_spare_activate(tvd);
}
vd->vdev_top = vd;
vd->vdev_aux = &spa->spa_spares;
if (vdev_open(vd) != 0)
continue;
if (vdev_validate_aux(vd) == 0)
spa_spare_add(vd);
}
/*
* Recompute the stashed list of spares, with status information
* this time.
*/
VERIFY(nvlist_remove(spa->spa_spares.sav_config, ZPOOL_CONFIG_SPARES,
DATA_TYPE_NVLIST_ARRAY) == 0);
spares = kmem_alloc(spa->spa_spares.sav_count * sizeof (void *),
KM_SLEEP);
for (i = 0; i < spa->spa_spares.sav_count; i++)
spares[i] = vdev_config_generate(spa,
spa->spa_spares.sav_vdevs[i], B_TRUE, VDEV_CONFIG_SPARE);
VERIFY(nvlist_add_nvlist_array(spa->spa_spares.sav_config,
ZPOOL_CONFIG_SPARES, spares, spa->spa_spares.sav_count) == 0);
for (i = 0; i < spa->spa_spares.sav_count; i++)
nvlist_free(spares[i]);
kmem_free(spares, spa->spa_spares.sav_count * sizeof (void *));
}
/*
* Load (or re-load) the current list of vdevs describing the active l2cache for
* this pool. When this is called, we have some form of basic information in
* 'spa_l2cache.sav_config'. We parse this into vdevs, try to open them, and
* then re-generate a more complete list including status information.
* Devices which are already active have their details maintained, and are
* not re-opened.
*/
void
spa_load_l2cache(spa_t *spa)
{
nvlist_t **l2cache = NULL;
uint_t nl2cache;
int i, j, oldnvdevs;
uint64_t guid;
vdev_t *vd, **oldvdevs, **newvdevs;
spa_aux_vdev_t *sav = &spa->spa_l2cache;
ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL);
oldvdevs = sav->sav_vdevs;
oldnvdevs = sav->sav_count;
sav->sav_vdevs = NULL;
sav->sav_count = 0;
if (sav->sav_config == NULL) {
nl2cache = 0;
newvdevs = NULL;
goto out;
}
VERIFY(nvlist_lookup_nvlist_array(sav->sav_config,
ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0);
newvdevs = kmem_alloc(nl2cache * sizeof (void *), KM_SLEEP);
/*
* Process new nvlist of vdevs.
*/
for (i = 0; i < nl2cache; i++) {
VERIFY(nvlist_lookup_uint64(l2cache[i], ZPOOL_CONFIG_GUID,
&guid) == 0);
newvdevs[i] = NULL;
for (j = 0; j < oldnvdevs; j++) {
vd = oldvdevs[j];
if (vd != NULL && guid == vd->vdev_guid) {
/*
* Retain previous vdev for add/remove ops.
*/
newvdevs[i] = vd;
oldvdevs[j] = NULL;
break;
}
}
if (newvdevs[i] == NULL) {
/*
* Create new vdev
*/
VERIFY(spa_config_parse(spa, &vd, l2cache[i], NULL, 0,
VDEV_ALLOC_L2CACHE) == 0);
ASSERT(vd != NULL);
newvdevs[i] = vd;
/*
* Commit this vdev as an l2cache device,
* even if it fails to open.
*/
spa_l2cache_add(vd);
vd->vdev_top = vd;
vd->vdev_aux = sav;
spa_l2cache_activate(vd);
if (vdev_open(vd) != 0)
continue;
(void) vdev_validate_aux(vd);
if (!vdev_is_dead(vd))
l2arc_add_vdev(spa, vd);
}
}
sav->sav_vdevs = newvdevs;
sav->sav_count = (int)nl2cache;
/*
* Recompute the stashed list of l2cache devices, with status
* information this time.
*/
VERIFY(nvlist_remove(sav->sav_config, ZPOOL_CONFIG_L2CACHE,
DATA_TYPE_NVLIST_ARRAY) == 0);
if (sav->sav_count > 0)
l2cache = kmem_alloc(sav->sav_count * sizeof (void *),
KM_SLEEP);
for (i = 0; i < sav->sav_count; i++)
l2cache[i] = vdev_config_generate(spa,
sav->sav_vdevs[i], B_TRUE, VDEV_CONFIG_L2CACHE);
VERIFY(nvlist_add_nvlist_array(sav->sav_config,
ZPOOL_CONFIG_L2CACHE, l2cache, sav->sav_count) == 0);
out:
/*
* Purge vdevs that were dropped
*/
for (i = 0; i < oldnvdevs; i++) {
uint64_t pool;
vd = oldvdevs[i];
if (vd != NULL) {
ASSERT(vd->vdev_isl2cache);
if (spa_l2cache_exists(vd->vdev_guid, &pool) &&
pool != 0ULL && l2arc_vdev_present(vd))
l2arc_remove_vdev(vd);
vdev_clear_stats(vd);
vdev_free(vd);
}
}
if (oldvdevs)
kmem_free(oldvdevs, oldnvdevs * sizeof (void *));
for (i = 0; i < sav->sav_count; i++)
nvlist_free(l2cache[i]);
if (sav->sav_count)
kmem_free(l2cache, sav->sav_count * sizeof (void *));
}
static int
load_nvlist(spa_t *spa, uint64_t obj, nvlist_t **value)
{
dmu_buf_t *db;
char *packed = NULL;
size_t nvsize = 0;
int error;
*value = NULL;
error = dmu_bonus_hold(spa->spa_meta_objset, obj, FTAG, &db);
if (error)
return (error);
nvsize = *(uint64_t *)db->db_data;
dmu_buf_rele(db, FTAG);
packed = vmem_alloc(nvsize, KM_SLEEP);
error = dmu_read(spa->spa_meta_objset, obj, 0, nvsize, packed,
DMU_READ_PREFETCH);
if (error == 0)
error = nvlist_unpack(packed, nvsize, value, 0);
vmem_free(packed, nvsize);
return (error);
}
/*
* Checks to see if the given vdev could not be opened, in which case we post a
* sysevent to notify the autoreplace code that the device has been removed.
*/
static void
spa_check_removed(vdev_t *vd)
{
for (int c = 0; c < vd->vdev_children; c++)
spa_check_removed(vd->vdev_child[c]);
if (vd->vdev_ops->vdev_op_leaf && vdev_is_dead(vd) &&
vdev_is_concrete(vd)) {
zfs_post_autoreplace(vd->vdev_spa, vd);
spa_event_notify(vd->vdev_spa, vd, NULL, ESC_ZFS_VDEV_CHECK);
}
}
static void
spa_config_valid_zaps(vdev_t *vd, vdev_t *mvd)
{
ASSERT3U(vd->vdev_children, ==, mvd->vdev_children);
vd->vdev_top_zap = mvd->vdev_top_zap;
vd->vdev_leaf_zap = mvd->vdev_leaf_zap;
for (uint64_t i = 0; i < vd->vdev_children; i++) {
spa_config_valid_zaps(vd->vdev_child[i], mvd->vdev_child[i]);
}
}
/*
* Validate the current config against the MOS config
*/
static boolean_t
spa_config_valid(spa_t *spa, nvlist_t *config)
{
vdev_t *mrvd, *rvd = spa->spa_root_vdev;
nvlist_t *nv;
VERIFY(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nv) == 0);
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
VERIFY(spa_config_parse(spa, &mrvd, nv, NULL, 0, VDEV_ALLOC_LOAD) == 0);
ASSERT3U(rvd->vdev_children, ==, mrvd->vdev_children);
/*
* If we're doing a normal import, then build up any additional
* diagnostic information about missing devices in this config.
* We'll pass this up to the user for further processing.
*/
if (!(spa->spa_import_flags & ZFS_IMPORT_MISSING_LOG)) {
nvlist_t **child, *nv;
uint64_t idx = 0;
child = kmem_alloc(rvd->vdev_children * sizeof (nvlist_t *),
KM_SLEEP);
VERIFY(nvlist_alloc(&nv, NV_UNIQUE_NAME, KM_SLEEP) == 0);
for (int c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
vdev_t *mtvd = mrvd->vdev_child[c];
if (tvd->vdev_ops == &vdev_missing_ops &&
mtvd->vdev_ops != &vdev_missing_ops &&
mtvd->vdev_islog)
child[idx++] = vdev_config_generate(spa, mtvd,
B_FALSE, 0);
}
if (idx) {
VERIFY(nvlist_add_nvlist_array(nv,
ZPOOL_CONFIG_CHILDREN, child, idx) == 0);
VERIFY(nvlist_add_nvlist(spa->spa_load_info,
ZPOOL_CONFIG_MISSING_DEVICES, nv) == 0);
for (int i = 0; i < idx; i++)
nvlist_free(child[i]);
}
nvlist_free(nv);
kmem_free(child, rvd->vdev_children * sizeof (char **));
}
/*
* Compare the root vdev tree with the information we have
* from the MOS config (mrvd). Check each top-level vdev
* with the corresponding MOS config top-level (mtvd).
*/
for (int c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
vdev_t *mtvd = mrvd->vdev_child[c];
/*
* Resolve any "missing" vdevs in the current configuration.
* Also trust the MOS config about any "indirect" vdevs.
* If we find that the MOS config has more accurate information
* about the top-level vdev then use that vdev instead.
*/
if ((tvd->vdev_ops == &vdev_missing_ops &&
mtvd->vdev_ops != &vdev_missing_ops) ||
(mtvd->vdev_ops == &vdev_indirect_ops &&
tvd->vdev_ops != &vdev_indirect_ops)) {
/*
* Device specific actions.
*/
if (mtvd->vdev_islog) {
if (!(spa->spa_import_flags &
ZFS_IMPORT_MISSING_LOG)) {
continue;
}
spa_set_log_state(spa, SPA_LOG_CLEAR);
} else if (mtvd->vdev_ops != &vdev_indirect_ops) {
continue;
}
/*
* Swap the missing vdev with the data we were
* able to obtain from the MOS config.
*/
vdev_remove_child(rvd, tvd);
vdev_remove_child(mrvd, mtvd);
vdev_add_child(rvd, mtvd);
vdev_add_child(mrvd, tvd);
vdev_reopen(rvd);
} else {
if (mtvd->vdev_islog) {
/*
* Load the slog device's state from the MOS
* config since it's possible that the label
* does not contain the most up-to-date
* information.
*/
vdev_load_log_state(tvd, mtvd);
vdev_reopen(tvd);
}
/*
* Per-vdev ZAP info is stored exclusively in the MOS.
*/
spa_config_valid_zaps(tvd, mtvd);
}
/*
* Never trust this info from userland; always use what's
* in the MOS. This prevents it from getting out of sync
* with the rest of the info in the MOS.
*/
tvd->vdev_removing = mtvd->vdev_removing;
tvd->vdev_indirect_config = mtvd->vdev_indirect_config;
}
vdev_free(mrvd);
spa_config_exit(spa, SCL_ALL, FTAG);
/*
* Ensure we were able to validate the config.
*/
return (rvd->vdev_guid_sum == spa->spa_uberblock.ub_guid_sum);
}
/*
* Check for missing log devices
*/
static boolean_t
spa_check_logs(spa_t *spa)
{
boolean_t rv = B_FALSE;
dsl_pool_t *dp = spa_get_dsl(spa);
switch (spa->spa_log_state) {
default:
break;
case SPA_LOG_MISSING:
/* need to recheck in case slog has been restored */
case SPA_LOG_UNKNOWN:
rv = (dmu_objset_find_dp(dp, dp->dp_root_dir_obj,
zil_check_log_chain, NULL, DS_FIND_CHILDREN) != 0);
if (rv)
spa_set_log_state(spa, SPA_LOG_MISSING);
break;
}
return (rv);
}
static boolean_t
spa_passivate_log(spa_t *spa)
{
vdev_t *rvd = spa->spa_root_vdev;
boolean_t slog_found = B_FALSE;
ASSERT(spa_config_held(spa, SCL_ALLOC, RW_WRITER));
if (!spa_has_slogs(spa))
return (B_FALSE);
for (int c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
if (tvd->vdev_islog) {
metaslab_group_passivate(mg);
slog_found = B_TRUE;
}
}
return (slog_found);
}
static void
spa_activate_log(spa_t *spa)
{
vdev_t *rvd = spa->spa_root_vdev;
ASSERT(spa_config_held(spa, SCL_ALLOC, RW_WRITER));
for (int c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
if (tvd->vdev_islog)
metaslab_group_activate(mg);
}
}
int
spa_reset_logs(spa_t *spa)
{
int error;
error = dmu_objset_find(spa_name(spa), zil_reset,
NULL, DS_FIND_CHILDREN);
if (error == 0) {
/*
* We successfully offlined the log device, sync out the
* current txg so that the "stubby" block can be removed
* by zil_sync().
*/
txg_wait_synced(spa->spa_dsl_pool, 0);
}
return (error);
}
static void
spa_aux_check_removed(spa_aux_vdev_t *sav)
{
for (int i = 0; i < sav->sav_count; i++)
spa_check_removed(sav->sav_vdevs[i]);
}
void
spa_claim_notify(zio_t *zio)
{
spa_t *spa = zio->io_spa;
if (zio->io_error)
return;
mutex_enter(&spa->spa_props_lock); /* any mutex will do */
if (spa->spa_claim_max_txg < zio->io_bp->blk_birth)
spa->spa_claim_max_txg = zio->io_bp->blk_birth;
mutex_exit(&spa->spa_props_lock);
}
typedef struct spa_load_error {
uint64_t sle_meta_count;
uint64_t sle_data_count;
} spa_load_error_t;
static void
spa_load_verify_done(zio_t *zio)
{
blkptr_t *bp = zio->io_bp;
spa_load_error_t *sle = zio->io_private;
dmu_object_type_t type = BP_GET_TYPE(bp);
int error = zio->io_error;
spa_t *spa = zio->io_spa;
abd_free(zio->io_abd);
if (error) {
if ((BP_GET_LEVEL(bp) != 0 || DMU_OT_IS_METADATA(type)) &&
type != DMU_OT_INTENT_LOG)
atomic_inc_64(&sle->sle_meta_count);
else
atomic_inc_64(&sle->sle_data_count);
}
mutex_enter(&spa->spa_scrub_lock);
spa->spa_load_verify_ios--;
cv_broadcast(&spa->spa_scrub_io_cv);
mutex_exit(&spa->spa_scrub_lock);
}
/*
* Maximum number of concurrent scrub i/os to create while verifying
* a pool while importing it.
*/
int spa_load_verify_maxinflight = 10000;
int spa_load_verify_metadata = B_TRUE;
int spa_load_verify_data = B_TRUE;
/*ARGSUSED*/
static int
spa_load_verify_cb(spa_t *spa, zilog_t *zilog, const blkptr_t *bp,
const zbookmark_phys_t *zb, const dnode_phys_t *dnp, void *arg)
{
if (bp == NULL || BP_IS_HOLE(bp) || BP_IS_EMBEDDED(bp))
return (0);
/*
* Note: normally this routine will not be called if
* spa_load_verify_metadata is not set. However, it may be useful
* to manually set the flag after the traversal has begun.
*/
if (!spa_load_verify_metadata)
return (0);
if (!BP_IS_METADATA(bp) && !spa_load_verify_data)
return (0);
zio_t *rio = arg;
size_t size = BP_GET_PSIZE(bp);
mutex_enter(&spa->spa_scrub_lock);
while (spa->spa_load_verify_ios >= spa_load_verify_maxinflight)
cv_wait(&spa->spa_scrub_io_cv, &spa->spa_scrub_lock);
spa->spa_load_verify_ios++;
mutex_exit(&spa->spa_scrub_lock);
zio_nowait(zio_read(rio, spa, bp, abd_alloc_for_io(size, B_FALSE), size,
spa_load_verify_done, rio->io_private, ZIO_PRIORITY_SCRUB,
ZIO_FLAG_SPECULATIVE | ZIO_FLAG_CANFAIL |
ZIO_FLAG_SCRUB | ZIO_FLAG_RAW, zb));
return (0);
}
/* ARGSUSED */
int
verify_dataset_name_len(dsl_pool_t *dp, dsl_dataset_t *ds, void *arg)
{
if (dsl_dataset_namelen(ds) >= ZFS_MAX_DATASET_NAME_LEN)
return (SET_ERROR(ENAMETOOLONG));
return (0);
}
static int
spa_load_verify(spa_t *spa)
{
zio_t *rio;
spa_load_error_t sle = { 0 };
zpool_rewind_policy_t policy;
boolean_t verify_ok = B_FALSE;
int error = 0;
zpool_get_rewind_policy(spa->spa_config, &policy);
if (policy.zrp_request & ZPOOL_NEVER_REWIND)
return (0);
dsl_pool_config_enter(spa->spa_dsl_pool, FTAG);
error = dmu_objset_find_dp(spa->spa_dsl_pool,
spa->spa_dsl_pool->dp_root_dir_obj, verify_dataset_name_len, NULL,
DS_FIND_CHILDREN);
dsl_pool_config_exit(spa->spa_dsl_pool, FTAG);
if (error != 0)
return (error);
rio = zio_root(spa, NULL, &sle,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE);
if (spa_load_verify_metadata) {
error = traverse_pool(spa, spa->spa_verify_min_txg,
TRAVERSE_PRE | TRAVERSE_PREFETCH_METADATA |
TRAVERSE_NO_DECRYPT, spa_load_verify_cb, rio);
}
(void) zio_wait(rio);
spa->spa_load_meta_errors = sle.sle_meta_count;
spa->spa_load_data_errors = sle.sle_data_count;
if (!error && sle.sle_meta_count <= policy.zrp_maxmeta &&
sle.sle_data_count <= policy.zrp_maxdata) {
int64_t loss = 0;
verify_ok = B_TRUE;
spa->spa_load_txg = spa->spa_uberblock.ub_txg;
spa->spa_load_txg_ts = spa->spa_uberblock.ub_timestamp;
loss = spa->spa_last_ubsync_txg_ts - spa->spa_load_txg_ts;
VERIFY(nvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_LOAD_TIME, spa->spa_load_txg_ts) == 0);
VERIFY(nvlist_add_int64(spa->spa_load_info,
ZPOOL_CONFIG_REWIND_TIME, loss) == 0);
VERIFY(nvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_LOAD_DATA_ERRORS, sle.sle_data_count) == 0);
} else {
spa->spa_load_max_txg = spa->spa_uberblock.ub_txg;
}
if (error) {
if (error != ENXIO && error != EIO)
error = SET_ERROR(EIO);
return (error);
}
return (verify_ok ? 0 : EIO);
}
/*
* Find a value in the pool props object.
*/
static void
spa_prop_find(spa_t *spa, zpool_prop_t prop, uint64_t *val)
{
(void) zap_lookup(spa->spa_meta_objset, spa->spa_pool_props_object,
zpool_prop_to_name(prop), sizeof (uint64_t), 1, val);
}
/*
* Find a value in the pool directory object.
*/
static int
spa_dir_prop(spa_t *spa, const char *name, uint64_t *val)
{
return (zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
name, sizeof (uint64_t), 1, val));
}
static int
spa_vdev_err(vdev_t *vdev, vdev_aux_t aux, int err)
{
vdev_set_state(vdev, B_TRUE, VDEV_STATE_CANT_OPEN, aux);
return (SET_ERROR(err));
}
/*
* Fix up config after a partly-completed split. This is done with the
* ZPOOL_CONFIG_SPLIT nvlist. Both the splitting pool and the split-off
* pool have that entry in their config, but only the splitting one contains
* a list of all the guids of the vdevs that are being split off.
*
* This function determines what to do with that list: either rejoin
* all the disks to the pool, or complete the splitting process. To attempt
* the rejoin, each disk that is offlined is marked online again, and
* we do a reopen() call. If the vdev label for every disk that was
* marked online indicates it was successfully split off (VDEV_AUX_SPLIT_POOL)
* then we call vdev_split() on each disk, and complete the split.
*
* Otherwise we leave the config alone, with all the vdevs in place in
* the original pool.
*/
static void
spa_try_repair(spa_t *spa, nvlist_t *config)
{
uint_t extracted;
uint64_t *glist;
uint_t i, gcount;
nvlist_t *nvl;
vdev_t **vd;
boolean_t attempt_reopen;
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_SPLIT, &nvl) != 0)
return;
/* check that the config is complete */
if (nvlist_lookup_uint64_array(nvl, ZPOOL_CONFIG_SPLIT_LIST,
&glist, &gcount) != 0)
return;
vd = kmem_zalloc(gcount * sizeof (vdev_t *), KM_SLEEP);
/* attempt to online all the vdevs & validate */
attempt_reopen = B_TRUE;
for (i = 0; i < gcount; i++) {
if (glist[i] == 0) /* vdev is hole */
continue;
vd[i] = spa_lookup_by_guid(spa, glist[i], B_FALSE);
if (vd[i] == NULL) {
/*
* Don't bother attempting to reopen the disks;
* just do the split.
*/
attempt_reopen = B_FALSE;
} else {
/* attempt to re-online it */
vd[i]->vdev_offline = B_FALSE;
}
}
if (attempt_reopen) {
vdev_reopen(spa->spa_root_vdev);
/* check each device to see what state it's in */
for (extracted = 0, i = 0; i < gcount; i++) {
if (vd[i] != NULL &&
vd[i]->vdev_stat.vs_aux != VDEV_AUX_SPLIT_POOL)
break;
++extracted;
}
}
/*
* If every disk has been moved to the new pool, or if we never
* even attempted to look at them, then we split them off for
* good.
*/
if (!attempt_reopen || gcount == extracted) {
for (i = 0; i < gcount; i++)
if (vd[i] != NULL)
vdev_split(vd[i]);
vdev_reopen(spa->spa_root_vdev);
}
kmem_free(vd, gcount * sizeof (vdev_t *));
}
static int
spa_load(spa_t *spa, spa_load_state_t state, spa_import_type_t type,
boolean_t mosconfig)
{
nvlist_t *config = spa->spa_config;
char *ereport = FM_EREPORT_ZFS_POOL;
char *comment;
int error;
uint64_t pool_guid;
nvlist_t *nvl;
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_GUID, &pool_guid))
return (SET_ERROR(EINVAL));
ASSERT(spa->spa_comment == NULL);
if (nvlist_lookup_string(config, ZPOOL_CONFIG_COMMENT, &comment) == 0)
spa->spa_comment = spa_strdup(comment);
/*
* Versioning wasn't explicitly added to the label until later, so if
* it's not present treat it as the initial version.
*/
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_VERSION,
&spa->spa_ubsync.ub_version) != 0)
spa->spa_ubsync.ub_version = SPA_VERSION_INITIAL;
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_TXG,
&spa->spa_config_txg);
if ((state == SPA_LOAD_IMPORT || state == SPA_LOAD_TRYIMPORT) &&
spa_guid_exists(pool_guid, 0)) {
error = SET_ERROR(EEXIST);
} else {
spa->spa_config_guid = pool_guid;
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_SPLIT,
&nvl) == 0) {
VERIFY(nvlist_dup(nvl, &spa->spa_config_splitting,
KM_SLEEP) == 0);
}
nvlist_free(spa->spa_load_info);
spa->spa_load_info = fnvlist_alloc();
gethrestime(&spa->spa_loaded_ts);
error = spa_load_impl(spa, pool_guid, config, state, type,
mosconfig, &ereport);
}
/*
* Don't count references from objsets that are already closed
* and are making their way through the eviction process.
*/
spa_evicting_os_wait(spa);
spa->spa_minref = refcount_count(&spa->spa_refcount);
if (error) {
if (error != EEXIST) {
spa->spa_loaded_ts.tv_sec = 0;
spa->spa_loaded_ts.tv_nsec = 0;
}
if (error != EBADF) {
zfs_ereport_post(ereport, spa, NULL, NULL, NULL, 0, 0);
}
}
spa->spa_load_state = error ? SPA_LOAD_ERROR : SPA_LOAD_NONE;
spa->spa_ena = 0;
return (error);
}
#ifdef ZFS_DEBUG
/*
* Count the number of per-vdev ZAPs associated with all of the vdevs in the
* vdev tree rooted in the given vd, and ensure that each ZAP is present in the
* spa's per-vdev ZAP list.
*/
static uint64_t
vdev_count_verify_zaps(vdev_t *vd)
{
spa_t *spa = vd->vdev_spa;
uint64_t total = 0;
if (vd->vdev_top_zap != 0) {
total++;
ASSERT0(zap_lookup_int(spa->spa_meta_objset,
spa->spa_all_vdev_zaps, vd->vdev_top_zap));
}
if (vd->vdev_leaf_zap != 0) {
total++;
ASSERT0(zap_lookup_int(spa->spa_meta_objset,
spa->spa_all_vdev_zaps, vd->vdev_leaf_zap));
}
for (uint64_t i = 0; i < vd->vdev_children; i++) {
total += vdev_count_verify_zaps(vd->vdev_child[i]);
}
return (total);
}
#endif
/*
* Determine whether the activity check is required.
*/
static boolean_t
spa_activity_check_required(spa_t *spa, uberblock_t *ub, nvlist_t *label,
nvlist_t *config)
{
uint64_t state = 0;
uint64_t hostid = 0;
uint64_t tryconfig_txg = 0;
uint64_t tryconfig_timestamp = 0;
nvlist_t *nvinfo;
if (nvlist_exists(config, ZPOOL_CONFIG_LOAD_INFO)) {
nvinfo = fnvlist_lookup_nvlist(config, ZPOOL_CONFIG_LOAD_INFO);
(void) nvlist_lookup_uint64(nvinfo, ZPOOL_CONFIG_MMP_TXG,
&tryconfig_txg);
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_TIMESTAMP,
&tryconfig_timestamp);
}
(void) nvlist_lookup_uint64(config, ZPOOL_CONFIG_POOL_STATE, &state);
/*
* Disable the MMP activity check - This is used by zdb which
* is intended to be used on potentially active pools.
*/
if (spa->spa_import_flags & ZFS_IMPORT_SKIP_MMP)
return (B_FALSE);
/*
* Skip the activity check when the MMP feature is disabled.
*/
if (ub->ub_mmp_magic == MMP_MAGIC && ub->ub_mmp_delay == 0)
return (B_FALSE);
/*
* If the tryconfig_* values are nonzero, they are the results of an
* earlier tryimport. If they match the uberblock we just found, then
* the pool has not changed and we return false so we do not test a
* second time.
*/
if (tryconfig_txg && tryconfig_txg == ub->ub_txg &&
tryconfig_timestamp && tryconfig_timestamp == ub->ub_timestamp)
return (B_FALSE);
/*
* Allow the activity check to be skipped when importing the pool
* on the same host which last imported it. Since the hostid from
* configuration may be stale use the one read from the label.
*/
if (nvlist_exists(label, ZPOOL_CONFIG_HOSTID))
hostid = fnvlist_lookup_uint64(label, ZPOOL_CONFIG_HOSTID);
if (hostid == spa_get_hostid())
return (B_FALSE);
/*
* Skip the activity test when the pool was cleanly exported.
*/
if (state != POOL_STATE_ACTIVE)
return (B_FALSE);
return (B_TRUE);
}
/*
* Perform the import activity check. If the user canceled the import or
* we detected activity then fail.
*/
static int
spa_activity_check(spa_t *spa, uberblock_t *ub, nvlist_t *config)
{
uint64_t import_intervals = MAX(zfs_multihost_import_intervals, 1);
uint64_t txg = ub->ub_txg;
uint64_t timestamp = ub->ub_timestamp;
uint64_t import_delay = NANOSEC;
hrtime_t import_expire;
nvlist_t *mmp_label = NULL;
vdev_t *rvd = spa->spa_root_vdev;
kcondvar_t cv;
kmutex_t mtx;
int error = 0;
cv_init(&cv, NULL, CV_DEFAULT, NULL);
mutex_init(&mtx, NULL, MUTEX_DEFAULT, NULL);
mutex_enter(&mtx);
/*
* If ZPOOL_CONFIG_MMP_TXG is present an activity check was performed
* during the earlier tryimport. If the txg recorded there is 0 then
* the pool is known to be active on another host.
*
* Otherwise, the pool might be in use on another node. Check for
* changes in the uberblocks on disk if necessary.
*/
if (nvlist_exists(config, ZPOOL_CONFIG_LOAD_INFO)) {
nvlist_t *nvinfo = fnvlist_lookup_nvlist(config,
ZPOOL_CONFIG_LOAD_INFO);
if (nvlist_exists(nvinfo, ZPOOL_CONFIG_MMP_TXG) &&
fnvlist_lookup_uint64(nvinfo, ZPOOL_CONFIG_MMP_TXG) == 0) {
vdev_uberblock_load(rvd, ub, &mmp_label);
error = SET_ERROR(EREMOTEIO);
goto out;
}
}
/*
* Preferentially use the zfs_multihost_interval from the node which
* last imported the pool. This value is stored in an MMP uberblock as.
*
* ub_mmp_delay * vdev_count_leaves() == zfs_multihost_interval
*/
if (ub->ub_mmp_magic == MMP_MAGIC && ub->ub_mmp_delay)
import_delay = MAX(import_delay, import_intervals *
ub->ub_mmp_delay * MAX(vdev_count_leaves(spa), 1));
/* Apply a floor using the local default values. */
import_delay = MAX(import_delay, import_intervals *
MSEC2NSEC(MAX(zfs_multihost_interval, MMP_MIN_INTERVAL)));
zfs_dbgmsg("import_delay=%llu ub_mmp_delay=%llu import_intervals=%u "
"leaves=%u", import_delay, ub->ub_mmp_delay, import_intervals,
vdev_count_leaves(spa));
/* Add a small random factor in case of simultaneous imports (0-25%) */
import_expire = gethrtime() + import_delay +
(import_delay * spa_get_random(250) / 1000);
while (gethrtime() < import_expire) {
vdev_uberblock_load(rvd, ub, &mmp_label);
if (txg != ub->ub_txg || timestamp != ub->ub_timestamp) {
error = SET_ERROR(EREMOTEIO);
break;
}
if (mmp_label) {
nvlist_free(mmp_label);
mmp_label = NULL;
}
error = cv_timedwait_sig(&cv, &mtx, ddi_get_lbolt() + hz);
if (error != -1) {
error = SET_ERROR(EINTR);
break;
}
error = 0;
}
out:
mutex_exit(&mtx);
mutex_destroy(&mtx);
cv_destroy(&cv);
/*
* If the pool is determined to be active store the status in the
* spa->spa_load_info nvlist. If the remote hostname or hostid are
* available from configuration read from disk store them as well.
* This allows 'zpool import' to generate a more useful message.
*
* ZPOOL_CONFIG_MMP_STATE - observed pool status (mandatory)
* ZPOOL_CONFIG_MMP_HOSTNAME - hostname from the active pool
* ZPOOL_CONFIG_MMP_HOSTID - hostid from the active pool
*/
if (error == EREMOTEIO) {
char *hostname = "<unknown>";
uint64_t hostid = 0;
if (mmp_label) {
if (nvlist_exists(mmp_label, ZPOOL_CONFIG_HOSTNAME)) {
hostname = fnvlist_lookup_string(mmp_label,
ZPOOL_CONFIG_HOSTNAME);
fnvlist_add_string(spa->spa_load_info,
ZPOOL_CONFIG_MMP_HOSTNAME, hostname);
}
if (nvlist_exists(mmp_label, ZPOOL_CONFIG_HOSTID)) {
hostid = fnvlist_lookup_uint64(mmp_label,
ZPOOL_CONFIG_HOSTID);
fnvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_MMP_HOSTID, hostid);
}
}
fnvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_MMP_STATE, MMP_STATE_ACTIVE);
fnvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_MMP_TXG, 0);
error = spa_vdev_err(rvd, VDEV_AUX_ACTIVE, EREMOTEIO);
}
if (mmp_label)
nvlist_free(mmp_label);
return (error);
}
/*
* Load an existing storage pool, using the pool's builtin spa_config as a
* source of configuration information.
*/
__attribute__((always_inline))
static inline int
spa_load_impl(spa_t *spa, uint64_t pool_guid, nvlist_t *config,
spa_load_state_t state, spa_import_type_t type, boolean_t trust_config,
char **ereport)
{
int error = 0;
nvlist_t *nvroot = NULL;
nvlist_t *label;
vdev_t *rvd;
uberblock_t *ub = &spa->spa_uberblock;
uint64_t children, config_cache_txg = spa->spa_config_txg;
int orig_mode = spa->spa_mode;
int parse;
uint64_t obj;
boolean_t missing_feat_write = B_FALSE;
boolean_t activity_check = B_FALSE;
/*
* If this is an untrusted config, access the pool in read-only mode.
* This prevents things like resilvering recently removed devices.
*/
if (!trust_config)
spa->spa_mode = FREAD;
ASSERT(MUTEX_HELD(&spa_namespace_lock));
spa->spa_load_state = state;
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvroot))
return (SET_ERROR(EINVAL));
parse = (type == SPA_IMPORT_EXISTING ?
VDEV_ALLOC_LOAD : VDEV_ALLOC_SPLIT);
/*
* Create "The Godfather" zio to hold all async IOs
*/
spa->spa_async_zio_root = kmem_alloc(max_ncpus * sizeof (void *),
KM_SLEEP);
for (int i = 0; i < max_ncpus; i++) {
spa->spa_async_zio_root[i] = zio_root(spa, NULL, NULL,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE |
ZIO_FLAG_GODFATHER);
}
/*
* Parse the configuration into a vdev tree. We explicitly set the
* value that will be returned by spa_version() since parsing the
* configuration requires knowing the version number.
*/
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
error = spa_config_parse(spa, &rvd, nvroot, NULL, 0, parse);
spa_config_exit(spa, SCL_ALL, FTAG);
if (error != 0)
return (error);
ASSERT(spa->spa_root_vdev == rvd);
ASSERT3U(spa->spa_min_ashift, >=, SPA_MINBLOCKSHIFT);
ASSERT3U(spa->spa_max_ashift, <=, SPA_MAXBLOCKSHIFT);
if (type != SPA_IMPORT_ASSEMBLE) {
ASSERT(spa_guid(spa) == pool_guid);
}
/*
* Try to open all vdevs, loading each label in the process.
*/
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
error = vdev_open(rvd);
spa_config_exit(spa, SCL_ALL, FTAG);
if (error != 0)
return (error);
/*
* We need to validate the vdev labels against the configuration that
* we have in hand, which is dependent on the setting of mosconfig. If
* mosconfig is true then we're validating the vdev labels based on
* that config. Otherwise, we're validating against the cached config
* (zpool.cache) that was read when we loaded the zfs module, and then
* later we will recursively call spa_load() and validate against
* the vdev config.
*
* If we're assembling a new pool that's been split off from an
* existing pool, the labels haven't yet been updated so we skip
* validation for now.
*/
if (type != SPA_IMPORT_ASSEMBLE) {
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
error = vdev_validate(rvd, trust_config);
spa_config_exit(spa, SCL_ALL, FTAG);
if (error != 0)
return (error);
if (rvd->vdev_state <= VDEV_STATE_CANT_OPEN)
return (SET_ERROR(ENXIO));
}
/*
* Find the best uberblock.
*/
vdev_uberblock_load(rvd, ub, &label);
/*
* If we weren't able to find a single valid uberblock, return failure.
*/
if (ub->ub_txg == 0) {
nvlist_free(label);
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, ENXIO));
}
/*
* For pools which have the multihost property on determine if the
* pool is truly inactive and can be safely imported. Prevent
* hosts which don't have a hostid set from importing the pool.
*/
activity_check = spa_activity_check_required(spa, ub, label, config);
if (activity_check) {
if (ub->ub_mmp_magic == MMP_MAGIC && ub->ub_mmp_delay &&
spa_get_hostid() == 0) {
nvlist_free(label);
fnvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_MMP_STATE, MMP_STATE_NO_HOSTID);
return (spa_vdev_err(rvd, VDEV_AUX_ACTIVE, EREMOTEIO));
}
error = spa_activity_check(spa, ub, config);
if (error) {
nvlist_free(label);
return (error);
}
fnvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_MMP_STATE, MMP_STATE_INACTIVE);
fnvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_MMP_TXG, ub->ub_txg);
}
/*
* If the pool has an unsupported version we can't open it.
*/
if (!SPA_VERSION_IS_SUPPORTED(ub->ub_version)) {
nvlist_free(label);
return (spa_vdev_err(rvd, VDEV_AUX_VERSION_NEWER, ENOTSUP));
}
if (ub->ub_version >= SPA_VERSION_FEATURES) {
nvlist_t *features;
/*
* If we weren't able to find what's necessary for reading the
* MOS in the label, return failure.
*/
if (label == NULL || nvlist_lookup_nvlist(label,
ZPOOL_CONFIG_FEATURES_FOR_READ, &features) != 0) {
nvlist_free(label);
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA,
ENXIO));
}
/*
* Update our in-core representation with the definitive values
* from the label.
*/
nvlist_free(spa->spa_label_features);
VERIFY(nvlist_dup(features, &spa->spa_label_features, 0) == 0);
}
nvlist_free(label);
/*
* Look through entries in the label nvlist's features_for_read. If
* there is a feature listed there which we don't understand then we
* cannot open a pool.
*/
if (ub->ub_version >= SPA_VERSION_FEATURES) {
nvlist_t *unsup_feat;
VERIFY(nvlist_alloc(&unsup_feat, NV_UNIQUE_NAME, KM_SLEEP) ==
0);
for (nvpair_t *nvp = nvlist_next_nvpair(spa->spa_label_features,
NULL); nvp != NULL;
nvp = nvlist_next_nvpair(spa->spa_label_features, nvp)) {
if (!zfeature_is_supported(nvpair_name(nvp))) {
VERIFY(nvlist_add_string(unsup_feat,
nvpair_name(nvp), "") == 0);
}
}
if (!nvlist_empty(unsup_feat)) {
VERIFY(nvlist_add_nvlist(spa->spa_load_info,
ZPOOL_CONFIG_UNSUP_FEAT, unsup_feat) == 0);
nvlist_free(unsup_feat);
return (spa_vdev_err(rvd, VDEV_AUX_UNSUP_FEAT,
ENOTSUP));
}
nvlist_free(unsup_feat);
}
/*
* If the vdev guid sum doesn't match the uberblock, we have an
* incomplete configuration. We first check to see if the pool
* is aware of the complete config (i.e ZPOOL_CONFIG_VDEV_CHILDREN).
* If it is, defer the vdev_guid_sum check till later so we
* can handle missing vdevs.
*/
if (nvlist_lookup_uint64(config, ZPOOL_CONFIG_VDEV_CHILDREN,
&children) != 0 && trust_config && type != SPA_IMPORT_ASSEMBLE &&
rvd->vdev_guid_sum != ub->ub_guid_sum)
return (spa_vdev_err(rvd, VDEV_AUX_BAD_GUID_SUM, ENXIO));
if (type != SPA_IMPORT_ASSEMBLE && spa->spa_config_splitting) {
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa_try_repair(spa, config);
spa_config_exit(spa, SCL_ALL, FTAG);
nvlist_free(spa->spa_config_splitting);
spa->spa_config_splitting = NULL;
}
/*
* Initialize internal SPA structures.
*/
spa->spa_state = POOL_STATE_ACTIVE;
spa->spa_ubsync = spa->spa_uberblock;
spa->spa_verify_min_txg = spa->spa_extreme_rewind ?
TXG_INITIAL - 1 : spa_last_synced_txg(spa) - TXG_DEFER_SIZE - 1;
spa->spa_first_txg = spa->spa_last_ubsync_txg ?
spa->spa_last_ubsync_txg : spa_last_synced_txg(spa) + 1;
spa->spa_claim_max_txg = spa->spa_first_txg;
spa->spa_prev_software_version = ub->ub_software_version;
/*
* Everything that we read before we do spa_remove_init() must
* have been rewritten after the last device removal was initiated.
* Otherwise we could be reading from indirect vdevs before
* we have loaded their mappings.
*/
error = dsl_pool_init(spa, spa->spa_first_txg, &spa->spa_dsl_pool);
if (error)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
spa->spa_meta_objset = spa->spa_dsl_pool->dp_meta_objset;
if (spa_dir_prop(spa, DMU_POOL_CONFIG, &spa->spa_config_object) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
/*
* Validate the config, using the MOS config to fill in any
* information which might be missing. If we fail to validate
* the config then declare the pool unfit for use. If we're
* assembling a pool from a split, the log is not transferred
* over.
*/
if (type != SPA_IMPORT_ASSEMBLE) {
nvlist_t *mos_config;
if (load_nvlist(spa, spa->spa_config_object, &mos_config) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
if (!spa_config_valid(spa, mos_config)) {
nvlist_free(mos_config);
return (spa_vdev_err(rvd, VDEV_AUX_BAD_GUID_SUM,
ENXIO));
}
nvlist_free(mos_config);
/*
* Now that we've validated the config, check the state of the
* root vdev. If it can't be opened, it indicates one or
* more toplevel vdevs are faulted.
*/
if (rvd->vdev_state <= VDEV_STATE_CANT_OPEN)
return (SET_ERROR(ENXIO));
}
/*
* Everything that we read before spa_remove_init() must be stored
* on concreted vdevs. Therefore we do this as early as possible.
*/
if (spa_remove_init(spa) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
if (spa_version(spa) >= SPA_VERSION_FEATURES) {
boolean_t missing_feat_read = B_FALSE;
nvlist_t *unsup_feat, *enabled_feat;
if (spa_dir_prop(spa, DMU_POOL_FEATURES_FOR_READ,
&spa->spa_feat_for_read_obj) != 0) {
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
}
if (spa_dir_prop(spa, DMU_POOL_FEATURES_FOR_WRITE,
&spa->spa_feat_for_write_obj) != 0) {
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
}
if (spa_dir_prop(spa, DMU_POOL_FEATURE_DESCRIPTIONS,
&spa->spa_feat_desc_obj) != 0) {
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
}
enabled_feat = fnvlist_alloc();
unsup_feat = fnvlist_alloc();
if (!spa_features_check(spa, B_FALSE,
unsup_feat, enabled_feat))
missing_feat_read = B_TRUE;
if (spa_writeable(spa) || state == SPA_LOAD_TRYIMPORT) {
if (!spa_features_check(spa, B_TRUE,
unsup_feat, enabled_feat)) {
missing_feat_write = B_TRUE;
}
}
fnvlist_add_nvlist(spa->spa_load_info,
ZPOOL_CONFIG_ENABLED_FEAT, enabled_feat);
if (!nvlist_empty(unsup_feat)) {
fnvlist_add_nvlist(spa->spa_load_info,
ZPOOL_CONFIG_UNSUP_FEAT, unsup_feat);
}
fnvlist_free(enabled_feat);
fnvlist_free(unsup_feat);
if (!missing_feat_read) {
fnvlist_add_boolean(spa->spa_load_info,
ZPOOL_CONFIG_CAN_RDONLY);
}
/*
* If the state is SPA_LOAD_TRYIMPORT, our objective is
* twofold: to determine whether the pool is available for
* import in read-write mode and (if it is not) whether the
* pool is available for import in read-only mode. If the pool
* is available for import in read-write mode, it is displayed
* as available in userland; if it is not available for import
* in read-only mode, it is displayed as unavailable in
* userland. If the pool is available for import in read-only
* mode but not read-write mode, it is displayed as unavailable
* in userland with a special note that the pool is actually
* available for open in read-only mode.
*
* As a result, if the state is SPA_LOAD_TRYIMPORT and we are
* missing a feature for write, we must first determine whether
* the pool can be opened read-only before returning to
* userland in order to know whether to display the
* abovementioned note.
*/
if (missing_feat_read || (missing_feat_write &&
spa_writeable(spa))) {
return (spa_vdev_err(rvd, VDEV_AUX_UNSUP_FEAT,
ENOTSUP));
}
/*
* Load refcounts for ZFS features from disk into an in-memory
* cache during SPA initialization.
*/
for (spa_feature_t i = 0; i < SPA_FEATURES; i++) {
uint64_t refcount;
error = feature_get_refcount_from_disk(spa,
&spa_feature_table[i], &refcount);
if (error == 0) {
spa->spa_feat_refcount_cache[i] = refcount;
} else if (error == ENOTSUP) {
spa->spa_feat_refcount_cache[i] =
SPA_FEATURE_DISABLED;
} else {
return (spa_vdev_err(rvd,
VDEV_AUX_CORRUPT_DATA, EIO));
}
}
}
if (spa_feature_is_active(spa, SPA_FEATURE_ENABLED_TXG)) {
if (spa_dir_prop(spa, DMU_POOL_FEATURE_ENABLED_TXG,
&spa->spa_feat_enabled_txg_obj) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
}
spa->spa_is_initializing = B_TRUE;
error = dsl_pool_open(spa->spa_dsl_pool);
spa->spa_is_initializing = B_FALSE;
if (error != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
if (!trust_config) {
uint64_t hostid;
nvlist_t *policy = NULL;
nvlist_t *mos_config;
if (load_nvlist(spa, spa->spa_config_object, &mos_config) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
if (!spa_is_root(spa) && nvlist_lookup_uint64(mos_config,
ZPOOL_CONFIG_HOSTID, &hostid) == 0) {
char *hostname;
unsigned long myhostid = 0;
VERIFY(nvlist_lookup_string(mos_config,
ZPOOL_CONFIG_HOSTNAME, &hostname) == 0);
myhostid = spa_get_hostid();
if (hostid && myhostid && hostid != myhostid) {
nvlist_free(mos_config);
return (SET_ERROR(EBADF));
}
}
if (nvlist_lookup_nvlist(spa->spa_config,
ZPOOL_REWIND_POLICY, &policy) == 0)
VERIFY(nvlist_add_nvlist(mos_config,
ZPOOL_REWIND_POLICY, policy) == 0);
spa_config_set(spa, mos_config);
spa_unload(spa);
spa_deactivate(spa);
spa_activate(spa, orig_mode);
return (spa_load(spa, state, SPA_IMPORT_EXISTING, B_TRUE));
}
/* Grab the checksum salt from the MOS. */
error = zap_lookup(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_CHECKSUM_SALT, 1,
sizeof (spa->spa_cksum_salt.zcs_bytes),
spa->spa_cksum_salt.zcs_bytes);
if (error == ENOENT) {
/* Generate a new salt for subsequent use */
(void) random_get_pseudo_bytes(spa->spa_cksum_salt.zcs_bytes,
sizeof (spa->spa_cksum_salt.zcs_bytes));
} else if (error != 0) {
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
}
if (spa_dir_prop(spa, DMU_POOL_SYNC_BPOBJ, &obj) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
error = bpobj_open(&spa->spa_deferred_bpobj, spa->spa_meta_objset, obj);
if (error != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
/*
* Load the bit that tells us to use the new accounting function
* (raid-z deflation). If we have an older pool, this will not
* be present.
*/
error = spa_dir_prop(spa, DMU_POOL_DEFLATE, &spa->spa_deflate);
if (error != 0 && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
error = spa_dir_prop(spa, DMU_POOL_CREATION_VERSION,
&spa->spa_creation_version);
if (error != 0 && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
/*
* Load the persistent error log. If we have an older pool, this will
* not be present.
*/
error = spa_dir_prop(spa, DMU_POOL_ERRLOG_LAST, &spa->spa_errlog_last);
if (error != 0 && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
error = spa_dir_prop(spa, DMU_POOL_ERRLOG_SCRUB,
&spa->spa_errlog_scrub);
if (error != 0 && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
/*
* Load the history object. If we have an older pool, this
* will not be present.
*/
error = spa_dir_prop(spa, DMU_POOL_HISTORY, &spa->spa_history);
if (error != 0 && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
/*
* Load the per-vdev ZAP map. If we have an older pool, this will not
* be present; in this case, defer its creation to a later time to
* avoid dirtying the MOS this early / out of sync context. See
* spa_sync_config_object.
*/
/* The sentinel is only available in the MOS config. */
nvlist_t *mos_config;
if (load_nvlist(spa, spa->spa_config_object, &mos_config) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
error = spa_dir_prop(spa, DMU_POOL_VDEV_ZAP_MAP,
&spa->spa_all_vdev_zaps);
if (error == ENOENT) {
VERIFY(!nvlist_exists(mos_config,
ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS));
spa->spa_avz_action = AVZ_ACTION_INITIALIZE;
ASSERT0(vdev_count_verify_zaps(spa->spa_root_vdev));
} else if (error != 0) {
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
} else if (!nvlist_exists(mos_config, ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS)) {
/*
* An older version of ZFS overwrote the sentinel value, so
* we have orphaned per-vdev ZAPs in the MOS. Defer their
* destruction to later; see spa_sync_config_object.
*/
spa->spa_avz_action = AVZ_ACTION_DESTROY;
/*
* We're assuming that no vdevs have had their ZAPs created
* before this. Better be sure of it.
*/
ASSERT0(vdev_count_verify_zaps(spa->spa_root_vdev));
}
nvlist_free(mos_config);
/*
* If we're assembling the pool from the split-off vdevs of
* an existing pool, we don't want to attach the spares & cache
* devices.
*/
/*
* Load any hot spares for this pool.
*/
error = spa_dir_prop(spa, DMU_POOL_SPARES, &spa->spa_spares.sav_object);
if (error != 0 && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
if (error == 0 && type != SPA_IMPORT_ASSEMBLE) {
ASSERT(spa_version(spa) >= SPA_VERSION_SPARES);
if (load_nvlist(spa, spa->spa_spares.sav_object,
&spa->spa_spares.sav_config) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa_load_spares(spa);
spa_config_exit(spa, SCL_ALL, FTAG);
} else if (error == 0) {
spa->spa_spares.sav_sync = B_TRUE;
}
/*
* Load any level 2 ARC devices for this pool.
*/
error = spa_dir_prop(spa, DMU_POOL_L2CACHE,
&spa->spa_l2cache.sav_object);
if (error != 0 && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
if (error == 0 && type != SPA_IMPORT_ASSEMBLE) {
ASSERT(spa_version(spa) >= SPA_VERSION_L2CACHE);
if (load_nvlist(spa, spa->spa_l2cache.sav_object,
&spa->spa_l2cache.sav_config) != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa_load_l2cache(spa);
spa_config_exit(spa, SCL_ALL, FTAG);
} else if (error == 0) {
spa->spa_l2cache.sav_sync = B_TRUE;
}
spa->spa_delegation = zpool_prop_default_numeric(ZPOOL_PROP_DELEGATION);
error = spa_dir_prop(spa, DMU_POOL_PROPS, &spa->spa_pool_props_object);
if (error && error != ENOENT)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
if (error == 0) {
uint64_t autoreplace = 0;
spa_prop_find(spa, ZPOOL_PROP_BOOTFS, &spa->spa_bootfs);
spa_prop_find(spa, ZPOOL_PROP_AUTOREPLACE, &autoreplace);
spa_prop_find(spa, ZPOOL_PROP_DELEGATION, &spa->spa_delegation);
spa_prop_find(spa, ZPOOL_PROP_FAILUREMODE, &spa->spa_failmode);
spa_prop_find(spa, ZPOOL_PROP_AUTOEXPAND, &spa->spa_autoexpand);
spa_prop_find(spa, ZPOOL_PROP_MULTIHOST, &spa->spa_multihost);
spa_prop_find(spa, ZPOOL_PROP_DEDUPDITTO,
&spa->spa_dedup_ditto);
spa->spa_autoreplace = (autoreplace != 0);
}
/*
* If the 'multihost' property is set, then never allow a pool to
* be imported when the system hostid is zero. The exception to
* this rule is zdb which is always allowed to access pools.
*/
if (spa_multihost(spa) && spa_get_hostid() == 0 &&
(spa->spa_import_flags & ZFS_IMPORT_SKIP_MMP) == 0) {
fnvlist_add_uint64(spa->spa_load_info,
ZPOOL_CONFIG_MMP_STATE, MMP_STATE_NO_HOSTID);
return (spa_vdev_err(rvd, VDEV_AUX_ACTIVE, EREMOTEIO));
}
/*
* If the 'autoreplace' property is set, then post a resource notifying
* the ZFS DE that it should not issue any faults for unopenable
* devices. We also iterate over the vdevs, and post a sysevent for any
* unopenable vdevs so that the normal autoreplace handler can take
* over.
*/
if (spa->spa_autoreplace && state != SPA_LOAD_TRYIMPORT) {
spa_check_removed(spa->spa_root_vdev);
/*
* For the import case, this is done in spa_import(), because
* at this point we're using the spare definitions from
* the MOS config, not necessarily from the userland config.
*/
if (state != SPA_LOAD_IMPORT) {
spa_aux_check_removed(&spa->spa_spares);
spa_aux_check_removed(&spa->spa_l2cache);
}
}
/*
* Load the vdev state for all toplevel vdevs.
*/
error = vdev_load(rvd);
if (error != 0) {
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error));
}
error = spa_condense_init(spa);
if (error != 0) {
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, error));
}
/*
* Propagate the leaf DTLs we just loaded all the way up the tree.
*/
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
vdev_dtl_reassess(rvd, 0, 0, B_FALSE);
spa_config_exit(spa, SCL_ALL, FTAG);
/*
* Load the DDTs (dedup tables).
*/
error = ddt_load(spa);
if (error != 0)
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA, EIO));
spa_update_dspace(spa);
if (type != SPA_IMPORT_ASSEMBLE && spa_writeable(spa) &&
spa_check_logs(spa)) {
*ereport = FM_EREPORT_ZFS_LOG_REPLAY;
return (spa_vdev_err(rvd, VDEV_AUX_BAD_LOG, ENXIO));
}
if (missing_feat_write) {
ASSERT(state == SPA_LOAD_TRYIMPORT);
/*
* At this point, we know that we can open the pool in
* read-only mode but not read-write mode. We now have enough
* information and can return to userland.
*/
return (spa_vdev_err(rvd, VDEV_AUX_UNSUP_FEAT, ENOTSUP));
}
/*
* We've successfully opened the pool, verify that we're ready
* to start pushing transactions.
*/
if (state != SPA_LOAD_TRYIMPORT) {
if ((error = spa_load_verify(spa)))
return (spa_vdev_err(rvd, VDEV_AUX_CORRUPT_DATA,
error));
}
if (spa_writeable(spa) && (state == SPA_LOAD_RECOVER ||
spa->spa_load_max_txg == UINT64_MAX)) {
dmu_tx_t *tx;
int need_update = B_FALSE;
dsl_pool_t *dp = spa_get_dsl(spa);
/*
* We must check this before we start the sync thread, because
* we only want to start a condense thread for condense
* operations that were in progress when the pool was
* imported. Once we start syncing, spa_sync() could
* initiate a condense (and start a thread for it). In
* that case it would be wrong to start a second
* condense thread.
*/
boolean_t condense_in_progress =
(spa->spa_condensing_indirect != NULL);
ASSERT(state != SPA_LOAD_TRYIMPORT);
/*
* Claim log blocks that haven't been committed yet.
* This must all happen in a single txg.
* Note: spa_claim_max_txg is updated by spa_claim_notify(),
* invoked from zil_claim_log_block()'s i/o done callback.
* Price of rollback is that we abandon the log.
*/
spa->spa_claiming = B_TRUE;
tx = dmu_tx_create_assigned(dp, spa_first_txg(spa));
(void) dmu_objset_find_dp(dp, dp->dp_root_dir_obj,
zil_claim, tx, DS_FIND_CHILDREN);
dmu_tx_commit(tx);
spa->spa_claiming = B_FALSE;
spa_set_log_state(spa, SPA_LOG_GOOD);
spa->spa_sync_on = B_TRUE;
txg_sync_start(spa->spa_dsl_pool);
mmp_thread_start(spa);
/*
* Wait for all claims to sync. We sync up to the highest
* claimed log block birth time so that claimed log blocks
* don't appear to be from the future. spa_claim_max_txg
* will have been set for us by either zil_check_log_chain()
* (invoked from spa_check_logs()) or zil_claim() above.
*/
txg_wait_synced(spa->spa_dsl_pool, spa->spa_claim_max_txg);
/*
* If the config cache is stale, or we have uninitialized
* metaslabs (see spa_vdev_add()), then update the config.
*
* If this is a verbatim import, trust the current
* in-core spa_config and update the disk labels.
*/
if (config_cache_txg != spa->spa_config_txg ||
state == SPA_LOAD_IMPORT ||
state == SPA_LOAD_RECOVER ||
(spa->spa_import_flags & ZFS_IMPORT_VERBATIM))
need_update = B_TRUE;
for (int c = 0; c < rvd->vdev_children; c++)
if (rvd->vdev_child[c]->vdev_ms_array == 0)
need_update = B_TRUE;
/*
* Update the config cache asychronously in case we're the
* root pool, in which case the config cache isn't writable yet.
*/
if (need_update)
spa_async_request(spa, SPA_ASYNC_CONFIG_UPDATE);
/*
* Check all DTLs to see if anything needs resilvering.
*/
if (!dsl_scan_resilvering(spa->spa_dsl_pool) &&
vdev_resilver_needed(rvd, NULL, NULL))
spa_async_request(spa, SPA_ASYNC_RESILVER);
/*
* Log the fact that we booted up (so that we can detect if
* we rebooted in the middle of an operation).
*/
spa_history_log_version(spa, "open", NULL);
/*
* Delete any inconsistent datasets.
*/
(void) dmu_objset_find(spa_name(spa),
dsl_destroy_inconsistent, NULL, DS_FIND_CHILDREN);
/*
* Clean up any stale temporary dataset userrefs.
*/
dsl_pool_clean_tmp_userrefs(spa->spa_dsl_pool);
/*
* Note: unlike condensing, we don't need an analogous
* "removal_in_progress" dance because no other thread
* can start a removal while we hold the spa_namespace_lock.
*/
spa_restart_removal(spa);
if (condense_in_progress)
spa_condense_indirect_restart(spa);
}
return (0);
}
static int
spa_load_retry(spa_t *spa, spa_load_state_t state, int mosconfig)
{
int mode = spa->spa_mode;
spa_unload(spa);
spa_deactivate(spa);
spa->spa_load_max_txg = spa->spa_uberblock.ub_txg - 1;
spa_activate(spa, mode);
spa_async_suspend(spa);
return (spa_load(spa, state, SPA_IMPORT_EXISTING, mosconfig));
}
/*
* If spa_load() fails this function will try loading prior txg's. If
* 'state' is SPA_LOAD_RECOVER and one of these loads succeeds the pool
* will be rewound to that txg. If 'state' is not SPA_LOAD_RECOVER this
* function will not rewind the pool and will return the same error as
* spa_load().
*/
static int
spa_load_best(spa_t *spa, spa_load_state_t state, int mosconfig,
uint64_t max_request, int rewind_flags)
{
nvlist_t *loadinfo = NULL;
nvlist_t *config = NULL;
int load_error, rewind_error;
uint64_t safe_rewind_txg;
uint64_t min_txg;
if (spa->spa_load_txg && state == SPA_LOAD_RECOVER) {
spa->spa_load_max_txg = spa->spa_load_txg;
spa_set_log_state(spa, SPA_LOG_CLEAR);
} else {
spa->spa_load_max_txg = max_request;
if (max_request != UINT64_MAX)
spa->spa_extreme_rewind = B_TRUE;
}
load_error = rewind_error = spa_load(spa, state, SPA_IMPORT_EXISTING,
mosconfig);
if (load_error == 0)
return (0);
if (spa->spa_root_vdev != NULL)
config = spa_config_generate(spa, NULL, -1ULL, B_TRUE);
spa->spa_last_ubsync_txg = spa->spa_uberblock.ub_txg;
spa->spa_last_ubsync_txg_ts = spa->spa_uberblock.ub_timestamp;
if (rewind_flags & ZPOOL_NEVER_REWIND) {
nvlist_free(config);
return (load_error);
}
if (state == SPA_LOAD_RECOVER) {
/* Price of rolling back is discarding txgs, including log */
spa_set_log_state(spa, SPA_LOG_CLEAR);
} else {
/*
* If we aren't rolling back save the load info from our first
* import attempt so that we can restore it after attempting
* to rewind.
*/
loadinfo = spa->spa_load_info;
spa->spa_load_info = fnvlist_alloc();
}
spa->spa_load_max_txg = spa->spa_last_ubsync_txg;
safe_rewind_txg = spa->spa_last_ubsync_txg - TXG_DEFER_SIZE;
min_txg = (rewind_flags & ZPOOL_EXTREME_REWIND) ?
TXG_INITIAL : safe_rewind_txg;
/*
* Continue as long as we're finding errors, we're still within
* the acceptable rewind range, and we're still finding uberblocks
*/
while (rewind_error && spa->spa_uberblock.ub_txg >= min_txg &&
spa->spa_uberblock.ub_txg <= spa->spa_load_max_txg) {
if (spa->spa_load_max_txg < safe_rewind_txg)
spa->spa_extreme_rewind = B_TRUE;
rewind_error = spa_load_retry(spa, state, mosconfig);
}
spa->spa_extreme_rewind = B_FALSE;
spa->spa_load_max_txg = UINT64_MAX;
if (config && (rewind_error || state != SPA_LOAD_RECOVER))
spa_config_set(spa, config);
else
nvlist_free(config);
if (state == SPA_LOAD_RECOVER) {
ASSERT3P(loadinfo, ==, NULL);
return (rewind_error);
} else {
/* Store the rewind info as part of the initial load info */
fnvlist_add_nvlist(loadinfo, ZPOOL_CONFIG_REWIND_INFO,
spa->spa_load_info);
/* Restore the initial load info */
fnvlist_free(spa->spa_load_info);
spa->spa_load_info = loadinfo;
return (load_error);
}
}
/*
* Pool Open/Import
*
* The import case is identical to an open except that the configuration is sent
* down from userland, instead of grabbed from the configuration cache. For the
* case of an open, the pool configuration will exist in the
* POOL_STATE_UNINITIALIZED state.
*
* The stats information (gen/count/ustats) is used to gather vdev statistics at
* the same time open the pool, without having to keep around the spa_t in some
* ambiguous state.
*/
static int
spa_open_common(const char *pool, spa_t **spapp, void *tag, nvlist_t *nvpolicy,
nvlist_t **config)
{
spa_t *spa;
spa_load_state_t state = SPA_LOAD_OPEN;
int error;
int locked = B_FALSE;
int firstopen = B_FALSE;
*spapp = NULL;
/*
* As disgusting as this is, we need to support recursive calls to this
* function because dsl_dir_open() is called during spa_load(), and ends
* up calling spa_open() again. The real fix is to figure out how to
* avoid dsl_dir_open() calling this in the first place.
*/
if (MUTEX_NOT_HELD(&spa_namespace_lock)) {
mutex_enter(&spa_namespace_lock);
locked = B_TRUE;
}
if ((spa = spa_lookup(pool)) == NULL) {
if (locked)
mutex_exit(&spa_namespace_lock);
return (SET_ERROR(ENOENT));
}
if (spa->spa_state == POOL_STATE_UNINITIALIZED) {
zpool_rewind_policy_t policy;
firstopen = B_TRUE;
zpool_get_rewind_policy(nvpolicy ? nvpolicy : spa->spa_config,
&policy);
if (policy.zrp_request & ZPOOL_DO_REWIND)
state = SPA_LOAD_RECOVER;
spa_activate(spa, spa_mode_global);
if (state != SPA_LOAD_RECOVER)
spa->spa_last_ubsync_txg = spa->spa_load_txg = 0;
error = spa_load_best(spa, state, B_FALSE, policy.zrp_txg,
policy.zrp_request);
if (error == EBADF) {
/*
* If vdev_validate() returns failure (indicated by
* EBADF), it indicates that one of the vdevs indicates
* that the pool has been exported or destroyed. If
* this is the case, the config cache is out of sync and
* we should remove the pool from the namespace.
*/
spa_unload(spa);
spa_deactivate(spa);
spa_write_cachefile(spa, B_TRUE, B_TRUE);
spa_remove(spa);
if (locked)
mutex_exit(&spa_namespace_lock);
return (SET_ERROR(ENOENT));
}
if (error) {
/*
* We can't open the pool, but we still have useful
* information: the state of each vdev after the
* attempted vdev_open(). Return this to the user.
*/
if (config != NULL && spa->spa_config) {
VERIFY(nvlist_dup(spa->spa_config, config,
KM_SLEEP) == 0);
VERIFY(nvlist_add_nvlist(*config,
ZPOOL_CONFIG_LOAD_INFO,
spa->spa_load_info) == 0);
}
spa_unload(spa);
spa_deactivate(spa);
spa->spa_last_open_failed = error;
if (locked)
mutex_exit(&spa_namespace_lock);
*spapp = NULL;
return (error);
}
}
spa_open_ref(spa, tag);
if (config != NULL)
*config = spa_config_generate(spa, NULL, -1ULL, B_TRUE);
/*
* If we've recovered the pool, pass back any information we
* gathered while doing the load.
*/
if (state == SPA_LOAD_RECOVER) {
VERIFY(nvlist_add_nvlist(*config, ZPOOL_CONFIG_LOAD_INFO,
spa->spa_load_info) == 0);
}
if (locked) {
spa->spa_last_open_failed = 0;
spa->spa_last_ubsync_txg = 0;
spa->spa_load_txg = 0;
mutex_exit(&spa_namespace_lock);
}
if (firstopen)
zvol_create_minors(spa, spa_name(spa), B_TRUE);
*spapp = spa;
return (0);
}
int
spa_open_rewind(const char *name, spa_t **spapp, void *tag, nvlist_t *policy,
nvlist_t **config)
{
return (spa_open_common(name, spapp, tag, policy, config));
}
int
spa_open(const char *name, spa_t **spapp, void *tag)
{
return (spa_open_common(name, spapp, tag, NULL, NULL));
}
/*
* Lookup the given spa_t, incrementing the inject count in the process,
* preventing it from being exported or destroyed.
*/
spa_t *
spa_inject_addref(char *name)
{
spa_t *spa;
mutex_enter(&spa_namespace_lock);
if ((spa = spa_lookup(name)) == NULL) {
mutex_exit(&spa_namespace_lock);
return (NULL);
}
spa->spa_inject_ref++;
mutex_exit(&spa_namespace_lock);
return (spa);
}
void
spa_inject_delref(spa_t *spa)
{
mutex_enter(&spa_namespace_lock);
spa->spa_inject_ref--;
mutex_exit(&spa_namespace_lock);
}
/*
* Add spares device information to the nvlist.
*/
static void
spa_add_spares(spa_t *spa, nvlist_t *config)
{
nvlist_t **spares;
uint_t i, nspares;
nvlist_t *nvroot;
uint64_t guid;
vdev_stat_t *vs;
uint_t vsc;
uint64_t pool;
ASSERT(spa_config_held(spa, SCL_CONFIG, RW_READER));
if (spa->spa_spares.sav_count == 0)
return;
VERIFY(nvlist_lookup_nvlist(config,
ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0);
VERIFY(nvlist_lookup_nvlist_array(spa->spa_spares.sav_config,
ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0);
if (nspares != 0) {
VERIFY(nvlist_add_nvlist_array(nvroot,
ZPOOL_CONFIG_SPARES, spares, nspares) == 0);
VERIFY(nvlist_lookup_nvlist_array(nvroot,
ZPOOL_CONFIG_SPARES, &spares, &nspares) == 0);
/*
* Go through and find any spares which have since been
* repurposed as an active spare. If this is the case, update
* their status appropriately.
*/
for (i = 0; i < nspares; i++) {
VERIFY(nvlist_lookup_uint64(spares[i],
ZPOOL_CONFIG_GUID, &guid) == 0);
if (spa_spare_exists(guid, &pool, NULL) &&
pool != 0ULL) {
VERIFY(nvlist_lookup_uint64_array(
spares[i], ZPOOL_CONFIG_VDEV_STATS,
(uint64_t **)&vs, &vsc) == 0);
vs->vs_state = VDEV_STATE_CANT_OPEN;
vs->vs_aux = VDEV_AUX_SPARED;
}
}
}
}
/*
* Add l2cache device information to the nvlist, including vdev stats.
*/
static void
spa_add_l2cache(spa_t *spa, nvlist_t *config)
{
nvlist_t **l2cache;
uint_t i, j, nl2cache;
nvlist_t *nvroot;
uint64_t guid;
vdev_t *vd;
vdev_stat_t *vs;
uint_t vsc;
ASSERT(spa_config_held(spa, SCL_CONFIG, RW_READER));
if (spa->spa_l2cache.sav_count == 0)
return;
VERIFY(nvlist_lookup_nvlist(config,
ZPOOL_CONFIG_VDEV_TREE, &nvroot) == 0);
VERIFY(nvlist_lookup_nvlist_array(spa->spa_l2cache.sav_config,
ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0);
if (nl2cache != 0) {
VERIFY(nvlist_add_nvlist_array(nvroot,
ZPOOL_CONFIG_L2CACHE, l2cache, nl2cache) == 0);
VERIFY(nvlist_lookup_nvlist_array(nvroot,
ZPOOL_CONFIG_L2CACHE, &l2cache, &nl2cache) == 0);
/*
* Update level 2 cache device stats.
*/
for (i = 0; i < nl2cache; i++) {
VERIFY(nvlist_lookup_uint64(l2cache[i],
ZPOOL_CONFIG_GUID, &guid) == 0);
vd = NULL;
for (j = 0; j < spa->spa_l2cache.sav_count; j++) {
if (guid ==
spa->spa_l2cache.sav_vdevs[j]->vdev_guid) {
vd = spa->spa_l2cache.sav_vdevs[j];
break;
}
}
ASSERT(vd != NULL);
VERIFY(nvlist_lookup_uint64_array(l2cache[i],
ZPOOL_CONFIG_VDEV_STATS, (uint64_t **)&vs, &vsc)
== 0);
vdev_get_stats(vd, vs);
vdev_config_generate_stats(vd, l2cache[i]);
}
}
}
static void
spa_feature_stats_from_disk(spa_t *spa, nvlist_t *features)
{
zap_cursor_t zc;
zap_attribute_t za;
if (spa->spa_feat_for_read_obj != 0) {
for (zap_cursor_init(&zc, spa->spa_meta_objset,
spa->spa_feat_for_read_obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
ASSERT(za.za_integer_length == sizeof (uint64_t) &&
za.za_num_integers == 1);
VERIFY0(nvlist_add_uint64(features, za.za_name,
za.za_first_integer));
}
zap_cursor_fini(&zc);
}
if (spa->spa_feat_for_write_obj != 0) {
for (zap_cursor_init(&zc, spa->spa_meta_objset,
spa->spa_feat_for_write_obj);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
ASSERT(za.za_integer_length == sizeof (uint64_t) &&
za.za_num_integers == 1);
VERIFY0(nvlist_add_uint64(features, za.za_name,
za.za_first_integer));
}
zap_cursor_fini(&zc);
}
}
static void
spa_feature_stats_from_cache(spa_t *spa, nvlist_t *features)
{
int i;
for (i = 0; i < SPA_FEATURES; i++) {
zfeature_info_t feature = spa_feature_table[i];
uint64_t refcount;
if (feature_get_refcount(spa, &feature, &refcount) != 0)
continue;
VERIFY0(nvlist_add_uint64(features, feature.fi_guid, refcount));
}
}
/*
* Store a list of pool features and their reference counts in the
* config.
*
* The first time this is called on a spa, allocate a new nvlist, fetch
* the pool features and reference counts from disk, then save the list
* in the spa. In subsequent calls on the same spa use the saved nvlist
* and refresh its values from the cached reference counts. This
* ensures we don't block here on I/O on a suspended pool so 'zpool
* clear' can resume the pool.
*/
static void
spa_add_feature_stats(spa_t *spa, nvlist_t *config)
{
nvlist_t *features;
ASSERT(spa_config_held(spa, SCL_CONFIG, RW_READER));
mutex_enter(&spa->spa_feat_stats_lock);
features = spa->spa_feat_stats;
if (features != NULL) {
spa_feature_stats_from_cache(spa, features);
} else {
VERIFY0(nvlist_alloc(&features, NV_UNIQUE_NAME, KM_SLEEP));
spa->spa_feat_stats = features;
spa_feature_stats_from_disk(spa, features);
}
VERIFY0(nvlist_add_nvlist(config, ZPOOL_CONFIG_FEATURE_STATS,
features));
mutex_exit(&spa->spa_feat_stats_lock);
}
int
spa_get_stats(const char *name, nvlist_t **config,
char *altroot, size_t buflen)
{
int error;
spa_t *spa;
*config = NULL;
error = spa_open_common(name, &spa, FTAG, NULL, config);
if (spa != NULL) {
/*
* This still leaves a window of inconsistency where the spares
* or l2cache devices could change and the config would be
* self-inconsistent.
*/
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
if (*config != NULL) {
uint64_t loadtimes[2];
loadtimes[0] = spa->spa_loaded_ts.tv_sec;
loadtimes[1] = spa->spa_loaded_ts.tv_nsec;
VERIFY(nvlist_add_uint64_array(*config,
ZPOOL_CONFIG_LOADED_TIME, loadtimes, 2) == 0);
VERIFY(nvlist_add_uint64(*config,
ZPOOL_CONFIG_ERRCOUNT,
spa_get_errlog_size(spa)) == 0);
if (spa_suspended(spa)) {
VERIFY(nvlist_add_uint64(*config,
ZPOOL_CONFIG_SUSPENDED,
spa->spa_failmode) == 0);
VERIFY(nvlist_add_uint64(*config,
ZPOOL_CONFIG_SUSPENDED_REASON,
spa->spa_suspended) == 0);
}
spa_add_spares(spa, *config);
spa_add_l2cache(spa, *config);
spa_add_feature_stats(spa, *config);
}
}
/*
* We want to get the alternate root even for faulted pools, so we cheat
* and call spa_lookup() directly.
*/
if (altroot) {
if (spa == NULL) {
mutex_enter(&spa_namespace_lock);
spa = spa_lookup(name);
if (spa)
spa_altroot(spa, altroot, buflen);
else
altroot[0] = '\0';
spa = NULL;
mutex_exit(&spa_namespace_lock);
} else {
spa_altroot(spa, altroot, buflen);
}
}
if (spa != NULL) {
spa_config_exit(spa, SCL_CONFIG, FTAG);
spa_close(spa, FTAG);
}
return (error);
}
/*
* Validate that the auxiliary device array is well formed. We must have an
* array of nvlists, each which describes a valid leaf vdev. If this is an
* import (mode is VDEV_ALLOC_SPARE), then we allow corrupted spares to be
* specified, as long as they are well-formed.
*/
static int
spa_validate_aux_devs(spa_t *spa, nvlist_t *nvroot, uint64_t crtxg, int mode,
spa_aux_vdev_t *sav, const char *config, uint64_t version,
vdev_labeltype_t label)
{
nvlist_t **dev;
uint_t i, ndev;
vdev_t *vd;
int error;
ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL);
/*
* It's acceptable to have no devs specified.
*/
if (nvlist_lookup_nvlist_array(nvroot, config, &dev, &ndev) != 0)
return (0);
if (ndev == 0)
return (SET_ERROR(EINVAL));
/*
* Make sure the pool is formatted with a version that supports this
* device type.
*/
if (spa_version(spa) < version)
return (SET_ERROR(ENOTSUP));
/*
* Set the pending device list so we correctly handle device in-use
* checking.
*/
sav->sav_pending = dev;
sav->sav_npending = ndev;
for (i = 0; i < ndev; i++) {
if ((error = spa_config_parse(spa, &vd, dev[i], NULL, 0,
mode)) != 0)
goto out;
if (!vd->vdev_ops->vdev_op_leaf) {
vdev_free(vd);
error = SET_ERROR(EINVAL);
goto out;
}
vd->vdev_top = vd;
if ((error = vdev_open(vd)) == 0 &&
(error = vdev_label_init(vd, crtxg, label)) == 0) {
VERIFY(nvlist_add_uint64(dev[i], ZPOOL_CONFIG_GUID,
vd->vdev_guid) == 0);
}
vdev_free(vd);
if (error &&
(mode != VDEV_ALLOC_SPARE && mode != VDEV_ALLOC_L2CACHE))
goto out;
else
error = 0;
}
out:
sav->sav_pending = NULL;
sav->sav_npending = 0;
return (error);
}
static int
spa_validate_aux(spa_t *spa, nvlist_t *nvroot, uint64_t crtxg, int mode)
{
int error;
ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL);
if ((error = spa_validate_aux_devs(spa, nvroot, crtxg, mode,
&spa->spa_spares, ZPOOL_CONFIG_SPARES, SPA_VERSION_SPARES,
VDEV_LABEL_SPARE)) != 0) {
return (error);
}
return (spa_validate_aux_devs(spa, nvroot, crtxg, mode,
&spa->spa_l2cache, ZPOOL_CONFIG_L2CACHE, SPA_VERSION_L2CACHE,
VDEV_LABEL_L2CACHE));
}
static void
spa_set_aux_vdevs(spa_aux_vdev_t *sav, nvlist_t **devs, int ndevs,
const char *config)
{
int i;
if (sav->sav_config != NULL) {
nvlist_t **olddevs;
uint_t oldndevs;
nvlist_t **newdevs;
/*
* Generate new dev list by concatenating with the
* current dev list.
*/
VERIFY(nvlist_lookup_nvlist_array(sav->sav_config, config,
&olddevs, &oldndevs) == 0);
newdevs = kmem_alloc(sizeof (void *) *
(ndevs + oldndevs), KM_SLEEP);
for (i = 0; i < oldndevs; i++)
VERIFY(nvlist_dup(olddevs[i], &newdevs[i],
KM_SLEEP) == 0);
for (i = 0; i < ndevs; i++)
VERIFY(nvlist_dup(devs[i], &newdevs[i + oldndevs],
KM_SLEEP) == 0);
VERIFY(nvlist_remove(sav->sav_config, config,
DATA_TYPE_NVLIST_ARRAY) == 0);
VERIFY(nvlist_add_nvlist_array(sav->sav_config,
config, newdevs, ndevs + oldndevs) == 0);
for (i = 0; i < oldndevs + ndevs; i++)
nvlist_free(newdevs[i]);
kmem_free(newdevs, (oldndevs + ndevs) * sizeof (void *));
} else {
/*
* Generate a new dev list.
*/
VERIFY(nvlist_alloc(&sav->sav_config, NV_UNIQUE_NAME,
KM_SLEEP) == 0);
VERIFY(nvlist_add_nvlist_array(sav->sav_config, config,
devs, ndevs) == 0);
}
}
/*
* Stop and drop level 2 ARC devices
*/
void
spa_l2cache_drop(spa_t *spa)
{
vdev_t *vd;
int i;
spa_aux_vdev_t *sav = &spa->spa_l2cache;
for (i = 0; i < sav->sav_count; i++) {
uint64_t pool;
vd = sav->sav_vdevs[i];
ASSERT(vd != NULL);
if (spa_l2cache_exists(vd->vdev_guid, &pool) &&
pool != 0ULL && l2arc_vdev_present(vd))
l2arc_remove_vdev(vd);
}
}
/*
* Verify encryption parameters for spa creation. If we are encrypting, we must
* have the encryption feature flag enabled.
*/
static int
spa_create_check_encryption_params(dsl_crypto_params_t *dcp,
boolean_t has_encryption)
{
if (dcp->cp_crypt != ZIO_CRYPT_OFF &&
dcp->cp_crypt != ZIO_CRYPT_INHERIT &&
!has_encryption)
return (SET_ERROR(ENOTSUP));
return (dmu_objset_create_crypt_check(NULL, dcp));
}
/*
* Pool Creation
*/
int
spa_create(const char *pool, nvlist_t *nvroot, nvlist_t *props,
nvlist_t *zplprops, dsl_crypto_params_t *dcp)
{
spa_t *spa;
char *altroot = NULL;
vdev_t *rvd;
dsl_pool_t *dp;
dmu_tx_t *tx;
int error = 0;
uint64_t txg = TXG_INITIAL;
nvlist_t **spares, **l2cache;
uint_t nspares, nl2cache;
uint64_t version, obj, root_dsobj = 0;
boolean_t has_features;
boolean_t has_encryption;
spa_feature_t feat;
char *feat_name;
char *poolname;
nvlist_t *nvl;
if (nvlist_lookup_string(props, "tname", &poolname) != 0)
poolname = (char *)pool;
/*
* If this pool already exists, return failure.
*/
mutex_enter(&spa_namespace_lock);
if (spa_lookup(poolname) != NULL) {
mutex_exit(&spa_namespace_lock);
return (SET_ERROR(EEXIST));
}
/*
* Allocate a new spa_t structure.
*/
nvl = fnvlist_alloc();
fnvlist_add_string(nvl, ZPOOL_CONFIG_POOL_NAME, pool);
(void) nvlist_lookup_string(props,
zpool_prop_to_name(ZPOOL_PROP_ALTROOT), &altroot);
spa = spa_add(poolname, nvl, altroot);
fnvlist_free(nvl);
spa_activate(spa, spa_mode_global);
if (props && (error = spa_prop_validate(spa, props))) {
spa_deactivate(spa);
spa_remove(spa);
mutex_exit(&spa_namespace_lock);
return (error);
}
/*
* Temporary pool names should never be written to disk.
*/
if (poolname != pool)
spa->spa_import_flags |= ZFS_IMPORT_TEMP_NAME;
has_features = B_FALSE;
has_encryption = B_FALSE;
for (nvpair_t *elem = nvlist_next_nvpair(props, NULL);
elem != NULL; elem = nvlist_next_nvpair(props, elem)) {
if (zpool_prop_feature(nvpair_name(elem))) {
has_features = B_TRUE;
feat_name = strchr(nvpair_name(elem), '@') + 1;
VERIFY0(zfeature_lookup_name(feat_name, &feat));
if (feat == SPA_FEATURE_ENCRYPTION)
has_encryption = B_TRUE;
}
}
/* verify encryption params, if they were provided */
if (dcp != NULL) {
error = spa_create_check_encryption_params(dcp, has_encryption);
if (error != 0) {
spa_deactivate(spa);
spa_remove(spa);
mutex_exit(&spa_namespace_lock);
return (error);
}
}
if (has_features || nvlist_lookup_uint64(props,
zpool_prop_to_name(ZPOOL_PROP_VERSION), &version) != 0) {
version = SPA_VERSION;
}
ASSERT(SPA_VERSION_IS_SUPPORTED(version));
spa->spa_first_txg = txg;
spa->spa_uberblock.ub_txg = txg - 1;
spa->spa_uberblock.ub_version = version;
spa->spa_ubsync = spa->spa_uberblock;
spa->spa_load_state = SPA_LOAD_CREATE;
spa->spa_removing_phys.sr_state = DSS_NONE;
spa->spa_removing_phys.sr_removing_vdev = -1;
spa->spa_removing_phys.sr_prev_indirect_vdev = -1;
/*
* Create "The Godfather" zio to hold all async IOs
*/
spa->spa_async_zio_root = kmem_alloc(max_ncpus * sizeof (void *),
KM_SLEEP);
for (int i = 0; i < max_ncpus; i++) {
spa->spa_async_zio_root[i] = zio_root(spa, NULL, NULL,
ZIO_FLAG_CANFAIL | ZIO_FLAG_SPECULATIVE |
ZIO_FLAG_GODFATHER);
}
/*
* Create the root vdev.
*/
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
error = spa_config_parse(spa, &rvd, nvroot, NULL, 0, VDEV_ALLOC_ADD);
ASSERT(error != 0 || rvd != NULL);
ASSERT(error != 0 || spa->spa_root_vdev == rvd);
if (error == 0 && !zfs_allocatable_devs(nvroot))
error = SET_ERROR(EINVAL);
if (error == 0 &&
(error = vdev_create(rvd, txg, B_FALSE)) == 0 &&
(error = spa_validate_aux(spa, nvroot, txg,
VDEV_ALLOC_ADD)) == 0) {
for (int c = 0; c < rvd->vdev_children; c++) {
vdev_metaslab_set_size(rvd->vdev_child[c]);
vdev_expand(rvd->vdev_child[c], txg);
}
}
spa_config_exit(spa, SCL_ALL, FTAG);
if (error != 0) {
spa_unload(spa);
spa_deactivate(spa);
spa_remove(spa);
mutex_exit(&spa_namespace_lock);
return (error);
}
/*
* Get the list of spares, if specified.
*/
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES,
&spares, &nspares) == 0) {
VERIFY(nvlist_alloc(&spa->spa_spares.sav_config, NV_UNIQUE_NAME,
KM_SLEEP) == 0);
VERIFY(nvlist_add_nvlist_array(spa->spa_spares.sav_config,
ZPOOL_CONFIG_SPARES, spares, nspares) == 0);
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa_load_spares(spa);
spa_config_exit(spa, SCL_ALL, FTAG);
spa->spa_spares.sav_sync = B_TRUE;
}
/*
* Get the list of level 2 cache devices, if specified.
*/
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE,
&l2cache, &nl2cache) == 0) {
VERIFY(nvlist_alloc(&spa->spa_l2cache.sav_config,
NV_UNIQUE_NAME, KM_SLEEP) == 0);
VERIFY(nvlist_add_nvlist_array(spa->spa_l2cache.sav_config,
ZPOOL_CONFIG_L2CACHE, l2cache, nl2cache) == 0);
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa_load_l2cache(spa);
spa_config_exit(spa, SCL_ALL, FTAG);
spa->spa_l2cache.sav_sync = B_TRUE;
}
spa->spa_is_initializing = B_TRUE;
spa->spa_dsl_pool = dp = dsl_pool_create(spa, zplprops, dcp, txg);
spa->spa_is_initializing = B_FALSE;
/*
* Create DDTs (dedup tables).
*/
ddt_create(spa);
spa_update_dspace(spa);
tx = dmu_tx_create_assigned(dp, txg);
/*
* Create the pool's history object.
*/
if (version >= SPA_VERSION_ZPOOL_HISTORY && !spa->spa_history)
spa_history_create_obj(spa, tx);
spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_CREATE);
spa_history_log_version(spa, "create", tx);
/*
* Create the pool config object.
*/
spa->spa_config_object = dmu_object_alloc(spa->spa_meta_objset,
DMU_OT_PACKED_NVLIST, SPA_CONFIG_BLOCKSIZE,
DMU_OT_PACKED_NVLIST_SIZE, sizeof (uint64_t), tx);
if (zap_add(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CONFIG,
sizeof (uint64_t), 1, &spa->spa_config_object, tx) != 0) {
cmn_err(CE_PANIC, "failed to add pool config");
}
if (zap_add(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CREATION_VERSION,
sizeof (uint64_t), 1, &version, tx) != 0) {
cmn_err(CE_PANIC, "failed to add pool version");
}
/* Newly created pools with the right version are always deflated. */
if (version >= SPA_VERSION_RAIDZ_DEFLATE) {
spa->spa_deflate = TRUE;
if (zap_add(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_DEFLATE,
sizeof (uint64_t), 1, &spa->spa_deflate, tx) != 0) {
cmn_err(CE_PANIC, "failed to add deflate");
}
}
/*
* Create the deferred-free bpobj. Turn off compression
* because sync-to-convergence takes longer if the blocksize
* keeps changing.
*/
obj = bpobj_alloc(spa->spa_meta_objset, 1 << 14, tx);
dmu_object_set_compress(spa->spa_meta_objset, obj,
ZIO_COMPRESS_OFF, tx);
if (zap_add(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_SYNC_BPOBJ,
sizeof (uint64_t), 1, &obj, tx) != 0) {
cmn_err(CE_PANIC, "failed to add bpobj");
}
VERIFY3U(0, ==, bpobj_open(&spa->spa_deferred_bpobj,
spa->spa_meta_objset, obj));
/*
* Generate some random noise for salted checksums to operate on.
*/
(void) random_get_pseudo_bytes(spa->spa_cksum_salt.zcs_bytes,
sizeof (spa->spa_cksum_salt.zcs_bytes));
/*
* Set pool properties.
*/
spa->spa_bootfs = zpool_prop_default_numeric(ZPOOL_PROP_BOOTFS);
spa->spa_delegation = zpool_prop_default_numeric(ZPOOL_PROP_DELEGATION);
spa->spa_failmode = zpool_prop_default_numeric(ZPOOL_PROP_FAILUREMODE);
spa->spa_autoexpand = zpool_prop_default_numeric(ZPOOL_PROP_AUTOEXPAND);
spa->spa_multihost = zpool_prop_default_numeric(ZPOOL_PROP_MULTIHOST);
if (props != NULL) {
spa_configfile_set(spa, props, B_FALSE);
spa_sync_props(props, tx);
}
dmu_tx_commit(tx);
/*
* If the root dataset is encrypted we will need to create key mappings
* for the zio layer before we start to write any data to disk and hold
* them until after the first txg has been synced. Waiting for the first
* transaction to complete also ensures that our bean counters are
* appropriately updated.
*/
if (dp->dp_root_dir->dd_crypto_obj != 0) {
root_dsobj = dsl_dir_phys(dp->dp_root_dir)->dd_head_dataset_obj;
VERIFY0(spa_keystore_create_mapping_impl(spa, root_dsobj,
dp->dp_root_dir, FTAG));
}
spa->spa_sync_on = B_TRUE;
txg_sync_start(dp);
mmp_thread_start(spa);
txg_wait_synced(dp, txg);
if (dp->dp_root_dir->dd_crypto_obj != 0)
VERIFY0(spa_keystore_remove_mapping(spa, root_dsobj, FTAG));
spa_write_cachefile(spa, B_FALSE, B_TRUE);
/*
* Don't count references from objsets that are already closed
* and are making their way through the eviction process.
*/
spa_evicting_os_wait(spa);
spa->spa_minref = refcount_count(&spa->spa_refcount);
spa->spa_load_state = SPA_LOAD_NONE;
mutex_exit(&spa_namespace_lock);
return (0);
}
/*
* Import a non-root pool into the system.
*/
int
spa_import(char *pool, nvlist_t *config, nvlist_t *props, uint64_t flags)
{
spa_t *spa;
char *altroot = NULL;
spa_load_state_t state = SPA_LOAD_IMPORT;
zpool_rewind_policy_t policy;
uint64_t mode = spa_mode_global;
uint64_t readonly = B_FALSE;
int error;
nvlist_t *nvroot;
nvlist_t **spares, **l2cache;
uint_t nspares, nl2cache;
/*
* If a pool with this name exists, return failure.
*/
mutex_enter(&spa_namespace_lock);
if (spa_lookup(pool) != NULL) {
mutex_exit(&spa_namespace_lock);
return (SET_ERROR(EEXIST));
}
/*
* Create and initialize the spa structure.
*/
(void) nvlist_lookup_string(props,
zpool_prop_to_name(ZPOOL_PROP_ALTROOT), &altroot);
(void) nvlist_lookup_uint64(props,
zpool_prop_to_name(ZPOOL_PROP_READONLY), &readonly);
if (readonly)
mode = FREAD;
spa = spa_add(pool, config, altroot);
spa->spa_import_flags = flags;
/*
* Verbatim import - Take a pool and insert it into the namespace
* as if it had been loaded at boot.
*/
if (spa->spa_import_flags & ZFS_IMPORT_VERBATIM) {
if (props != NULL)
spa_configfile_set(spa, props, B_FALSE);
spa_write_cachefile(spa, B_FALSE, B_TRUE);
spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_IMPORT);
mutex_exit(&spa_namespace_lock);
return (0);
}
spa_activate(spa, mode);
/*
* Don't start async tasks until we know everything is healthy.
*/
spa_async_suspend(spa);
zpool_get_rewind_policy(config, &policy);
if (policy.zrp_request & ZPOOL_DO_REWIND)
state = SPA_LOAD_RECOVER;
/*
* Pass off the heavy lifting to spa_load(). Pass TRUE for mosconfig
* because the user-supplied config is actually the one to trust when
* doing an import.
*/
if (state != SPA_LOAD_RECOVER)
spa->spa_last_ubsync_txg = spa->spa_load_txg = 0;
error = spa_load_best(spa, state, B_TRUE, policy.zrp_txg,
policy.zrp_request);
/*
* Propagate anything learned while loading the pool and pass it
* back to caller (i.e. rewind info, missing devices, etc).
*/
VERIFY(nvlist_add_nvlist(config, ZPOOL_CONFIG_LOAD_INFO,
spa->spa_load_info) == 0);
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
/*
* Toss any existing sparelist, as it doesn't have any validity
* anymore, and conflicts with spa_has_spare().
*/
if (spa->spa_spares.sav_config) {
nvlist_free(spa->spa_spares.sav_config);
spa->spa_spares.sav_config = NULL;
spa_load_spares(spa);
}
if (spa->spa_l2cache.sav_config) {
nvlist_free(spa->spa_l2cache.sav_config);
spa->spa_l2cache.sav_config = NULL;
spa_load_l2cache(spa);
}
VERIFY(nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE,
&nvroot) == 0);
spa_config_exit(spa, SCL_ALL, FTAG);
if (props != NULL)
spa_configfile_set(spa, props, B_FALSE);
if (error != 0 || (props && spa_writeable(spa) &&
(error = spa_prop_set(spa, props)))) {
spa_unload(spa);
spa_deactivate(spa);
spa_remove(spa);
mutex_exit(&spa_namespace_lock);
return (error);
}
spa_async_resume(spa);
/*
* Override any spares and level 2 cache devices as specified by
* the user, as these may have correct device names/devids, etc.
*/
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES,
&spares, &nspares) == 0) {
if (spa->spa_spares.sav_config)
VERIFY(nvlist_remove(spa->spa_spares.sav_config,
ZPOOL_CONFIG_SPARES, DATA_TYPE_NVLIST_ARRAY) == 0);
else
VERIFY(nvlist_alloc(&spa->spa_spares.sav_config,
NV_UNIQUE_NAME, KM_SLEEP) == 0);
VERIFY(nvlist_add_nvlist_array(spa->spa_spares.sav_config,
ZPOOL_CONFIG_SPARES, spares, nspares) == 0);
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa_load_spares(spa);
spa_config_exit(spa, SCL_ALL, FTAG);
spa->spa_spares.sav_sync = B_TRUE;
}
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE,
&l2cache, &nl2cache) == 0) {
if (spa->spa_l2cache.sav_config)
VERIFY(nvlist_remove(spa->spa_l2cache.sav_config,
ZPOOL_CONFIG_L2CACHE, DATA_TYPE_NVLIST_ARRAY) == 0);
else
VERIFY(nvlist_alloc(&spa->spa_l2cache.sav_config,
NV_UNIQUE_NAME, KM_SLEEP) == 0);
VERIFY(nvlist_add_nvlist_array(spa->spa_l2cache.sav_config,
ZPOOL_CONFIG_L2CACHE, l2cache, nl2cache) == 0);
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa_load_l2cache(spa);
spa_config_exit(spa, SCL_ALL, FTAG);
spa->spa_l2cache.sav_sync = B_TRUE;
}
/*
* Check for any removed devices.
*/
if (spa->spa_autoreplace) {
spa_aux_check_removed(&spa->spa_spares);
spa_aux_check_removed(&spa->spa_l2cache);
}
if (spa_writeable(spa)) {
/*
* Update the config cache to include the newly-imported pool.
*/
spa_config_update(spa, SPA_CONFIG_UPDATE_POOL);
}
/*
* It's possible that the pool was expanded while it was exported.
* We kick off an async task to handle this for us.
*/
spa_async_request(spa, SPA_ASYNC_AUTOEXPAND);
spa_history_log_version(spa, "import", NULL);
spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_IMPORT);
zvol_create_minors(spa, pool, B_TRUE);
mutex_exit(&spa_namespace_lock);
return (0);
}
nvlist_t *
spa_tryimport(nvlist_t *tryconfig)
{
nvlist_t *config = NULL;
char *poolname;
spa_t *spa;
uint64_t state;
int error;
if (nvlist_lookup_string(tryconfig, ZPOOL_CONFIG_POOL_NAME, &poolname))
return (NULL);
if (nvlist_lookup_uint64(tryconfig, ZPOOL_CONFIG_POOL_STATE, &state))
return (NULL);
/*
* Create and initialize the spa structure.
*/
mutex_enter(&spa_namespace_lock);
spa = spa_add(TRYIMPORT_NAME, tryconfig, NULL);
spa_activate(spa, FREAD);
/*
* Pass off the heavy lifting to spa_load().
* Pass TRUE for mosconfig because the user-supplied config
* is actually the one to trust when doing an import.
*/
error = spa_load(spa, SPA_LOAD_TRYIMPORT, SPA_IMPORT_EXISTING, B_TRUE);
/*
* If 'tryconfig' was at least parsable, return the current config.
*/
if (spa->spa_root_vdev != NULL) {
config = spa_config_generate(spa, NULL, -1ULL, B_TRUE);
VERIFY(nvlist_add_string(config, ZPOOL_CONFIG_POOL_NAME,
poolname) == 0);
VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_POOL_STATE,
state) == 0);
VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_TIMESTAMP,
spa->spa_uberblock.ub_timestamp) == 0);
VERIFY(nvlist_add_nvlist(config, ZPOOL_CONFIG_LOAD_INFO,
spa->spa_load_info) == 0);
VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_ERRATA,
spa->spa_errata) == 0);
/*
* If the bootfs property exists on this pool then we
* copy it out so that external consumers can tell which
* pools are bootable.
*/
if ((!error || error == EEXIST) && spa->spa_bootfs) {
char *tmpname = kmem_alloc(MAXPATHLEN, KM_SLEEP);
/*
* We have to play games with the name since the
* pool was opened as TRYIMPORT_NAME.
*/
if (dsl_dsobj_to_dsname(spa_name(spa),
spa->spa_bootfs, tmpname) == 0) {
char *cp;
char *dsname;
dsname = kmem_alloc(MAXPATHLEN, KM_SLEEP);
cp = strchr(tmpname, '/');
if (cp == NULL) {
(void) strlcpy(dsname, tmpname,
MAXPATHLEN);
} else {
(void) snprintf(dsname, MAXPATHLEN,
"%s/%s", poolname, ++cp);
}
VERIFY(nvlist_add_string(config,
ZPOOL_CONFIG_BOOTFS, dsname) == 0);
kmem_free(dsname, MAXPATHLEN);
}
kmem_free(tmpname, MAXPATHLEN);
}
/*
* Add the list of hot spares and level 2 cache devices.
*/
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
spa_add_spares(spa, config);
spa_add_l2cache(spa, config);
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
spa_unload(spa);
spa_deactivate(spa);
spa_remove(spa);
mutex_exit(&spa_namespace_lock);
return (config);
}
/*
* Pool export/destroy
*
* The act of destroying or exporting a pool is very simple. We make sure there
* is no more pending I/O and any references to the pool are gone. Then, we
* update the pool state and sync all the labels to disk, removing the
* configuration from the cache afterwards. If the 'hardforce' flag is set, then
* we don't sync the labels or remove the configuration cache.
*/
static int
spa_export_common(char *pool, int new_state, nvlist_t **oldconfig,
boolean_t force, boolean_t hardforce)
{
spa_t *spa;
if (oldconfig)
*oldconfig = NULL;
if (!(spa_mode_global & FWRITE))
return (SET_ERROR(EROFS));
mutex_enter(&spa_namespace_lock);
if ((spa = spa_lookup(pool)) == NULL) {
mutex_exit(&spa_namespace_lock);
return (SET_ERROR(ENOENT));
}
/*
* Put a hold on the pool, drop the namespace lock, stop async tasks,
* reacquire the namespace lock, and see if we can export.
*/
spa_open_ref(spa, FTAG);
mutex_exit(&spa_namespace_lock);
spa_async_suspend(spa);
if (spa->spa_zvol_taskq) {
zvol_remove_minors(spa, spa_name(spa), B_TRUE);
taskq_wait(spa->spa_zvol_taskq);
}
mutex_enter(&spa_namespace_lock);
spa_close(spa, FTAG);
if (spa->spa_state == POOL_STATE_UNINITIALIZED)
goto export_spa;
/*
* The pool will be in core if it's openable, in which case we can
* modify its state. Objsets may be open only because they're dirty,
* so we have to force it to sync before checking spa_refcnt.
*/
if (spa->spa_sync_on) {
txg_wait_synced(spa->spa_dsl_pool, 0);
spa_evicting_os_wait(spa);
}
/*
* A pool cannot be exported or destroyed if there are active
* references. If we are resetting a pool, allow references by
* fault injection handlers.
*/
if (!spa_refcount_zero(spa) ||
(spa->spa_inject_ref != 0 &&
new_state != POOL_STATE_UNINITIALIZED)) {
spa_async_resume(spa);
mutex_exit(&spa_namespace_lock);
return (SET_ERROR(EBUSY));
}
if (spa->spa_sync_on) {
/*
* A pool cannot be exported if it has an active shared spare.
* This is to prevent other pools stealing the active spare
* from an exported pool. At user's own will, such pool can
* be forcedly exported.
*/
if (!force && new_state == POOL_STATE_EXPORTED &&
spa_has_active_shared_spare(spa)) {
spa_async_resume(spa);
mutex_exit(&spa_namespace_lock);
return (SET_ERROR(EXDEV));
}
/*
* We want this to be reflected on every label,
* so mark them all dirty. spa_unload() will do the
* final sync that pushes these changes out.
*/
if (new_state != POOL_STATE_UNINITIALIZED && !hardforce) {
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
spa->spa_state = new_state;
spa->spa_final_txg = spa_last_synced_txg(spa) +
TXG_DEFER_SIZE + 1;
vdev_config_dirty(spa->spa_root_vdev);
spa_config_exit(spa, SCL_ALL, FTAG);
}
}
export_spa:
if (new_state == POOL_STATE_DESTROYED)
spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_DESTROY);
else if (new_state == POOL_STATE_EXPORTED)
spa_event_notify(spa, NULL, NULL, ESC_ZFS_POOL_EXPORT);
if (spa->spa_state != POOL_STATE_UNINITIALIZED) {
spa_unload(spa);
spa_deactivate(spa);
}
if (oldconfig && spa->spa_config)
VERIFY(nvlist_dup(spa->spa_config, oldconfig, 0) == 0);
if (new_state != POOL_STATE_UNINITIALIZED) {
if (!hardforce)
spa_write_cachefile(spa, B_TRUE, B_TRUE);
spa_remove(spa);
}
mutex_exit(&spa_namespace_lock);
return (0);
}
/*
* Destroy a storage pool.
*/
int
spa_destroy(char *pool)
{
return (spa_export_common(pool, POOL_STATE_DESTROYED, NULL,
B_FALSE, B_FALSE));
}
/*
* Export a storage pool.
*/
int
spa_export(char *pool, nvlist_t **oldconfig, boolean_t force,
boolean_t hardforce)
{
return (spa_export_common(pool, POOL_STATE_EXPORTED, oldconfig,
force, hardforce));
}
/*
* Similar to spa_export(), this unloads the spa_t without actually removing it
* from the namespace in any way.
*/
int
spa_reset(char *pool)
{
return (spa_export_common(pool, POOL_STATE_UNINITIALIZED, NULL,
B_FALSE, B_FALSE));
}
/*
* ==========================================================================
* Device manipulation
* ==========================================================================
*/
/*
* Add a device to a storage pool.
*/
int
spa_vdev_add(spa_t *spa, nvlist_t *nvroot)
{
uint64_t txg, id;
int error;
vdev_t *rvd = spa->spa_root_vdev;
vdev_t *vd, *tvd;
nvlist_t **spares, **l2cache;
uint_t nspares, nl2cache;
ASSERT(spa_writeable(spa));
txg = spa_vdev_enter(spa);
if ((error = spa_config_parse(spa, &vd, nvroot, NULL, 0,
VDEV_ALLOC_ADD)) != 0)
return (spa_vdev_exit(spa, NULL, txg, error));
spa->spa_pending_vdev = vd; /* spa_vdev_exit() will clear this */
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_SPARES, &spares,
&nspares) != 0)
nspares = 0;
if (nvlist_lookup_nvlist_array(nvroot, ZPOOL_CONFIG_L2CACHE, &l2cache,
&nl2cache) != 0)
nl2cache = 0;
if (vd->vdev_children == 0 && nspares == 0 && nl2cache == 0)
return (spa_vdev_exit(spa, vd, txg, EINVAL));
if (vd->vdev_children != 0 &&
(error = vdev_create(vd, txg, B_FALSE)) != 0)
return (spa_vdev_exit(spa, vd, txg, error));
/*
* We must validate the spares and l2cache devices after checking the
* children. Otherwise, vdev_inuse() will blindly overwrite the spare.
*/
if ((error = spa_validate_aux(spa, nvroot, txg, VDEV_ALLOC_ADD)) != 0)
return (spa_vdev_exit(spa, vd, txg, error));
/*
* If we are in the middle of a device removal, we can only add
* devices which match the existing devices in the pool.
* If we are in the middle of a removal, or have some indirect
* vdevs, we can not add raidz toplevels.
*/
if (spa->spa_vdev_removal != NULL ||
spa->spa_removing_phys.sr_prev_indirect_vdev != -1) {
for (int c = 0; c < vd->vdev_children; c++) {
tvd = vd->vdev_child[c];
if (spa->spa_vdev_removal != NULL &&
tvd->vdev_ashift != spa->spa_max_ashift) {
return (spa_vdev_exit(spa, vd, txg, EINVAL));
}
/* Fail if top level vdev is raidz */
if (tvd->vdev_ops == &vdev_raidz_ops) {
return (spa_vdev_exit(spa, vd, txg, EINVAL));
}
/*
* Need the top level mirror to be
* a mirror of leaf vdevs only
*/
if (tvd->vdev_ops == &vdev_mirror_ops) {
for (uint64_t cid = 0;
cid < tvd->vdev_children; cid++) {
vdev_t *cvd = tvd->vdev_child[cid];
if (!cvd->vdev_ops->vdev_op_leaf) {
return (spa_vdev_exit(spa, vd,
txg, EINVAL));
}
}
}
}
}
for (int c = 0; c < vd->vdev_children; c++) {
/*
* Set the vdev id to the first hole, if one exists.
*/
for (id = 0; id < rvd->vdev_children; id++) {
if (rvd->vdev_child[id]->vdev_ishole) {
vdev_free(rvd->vdev_child[id]);
break;
}
}
tvd = vd->vdev_child[c];
vdev_remove_child(vd, tvd);
tvd->vdev_id = id;
vdev_add_child(rvd, tvd);
vdev_config_dirty(tvd);
}
if (nspares != 0) {
spa_set_aux_vdevs(&spa->spa_spares, spares, nspares,
ZPOOL_CONFIG_SPARES);
spa_load_spares(spa);
spa->spa_spares.sav_sync = B_TRUE;
}
if (nl2cache != 0) {
spa_set_aux_vdevs(&spa->spa_l2cache, l2cache, nl2cache,
ZPOOL_CONFIG_L2CACHE);
spa_load_l2cache(spa);
spa->spa_l2cache.sav_sync = B_TRUE;
}
/*
* We have to be careful when adding new vdevs to an existing pool.
* If other threads start allocating from these vdevs before we
* sync the config cache, and we lose power, then upon reboot we may
* fail to open the pool because there are DVAs that the config cache
* can't translate. Therefore, we first add the vdevs without
* initializing metaslabs; sync the config cache (via spa_vdev_exit());
* and then let spa_config_update() initialize the new metaslabs.
*
* spa_load() checks for added-but-not-initialized vdevs, so that
* if we lose power at any point in this sequence, the remaining
* steps will be completed the next time we load the pool.
*/
(void) spa_vdev_exit(spa, vd, txg, 0);
mutex_enter(&spa_namespace_lock);
spa_config_update(spa, SPA_CONFIG_UPDATE_POOL);
spa_event_notify(spa, NULL, NULL, ESC_ZFS_VDEV_ADD);
mutex_exit(&spa_namespace_lock);
return (0);
}
/*
* Attach a device to a mirror. The arguments are the path to any device
* in the mirror, and the nvroot for the new device. If the path specifies
* a device that is not mirrored, we automatically insert the mirror vdev.
*
* If 'replacing' is specified, the new device is intended to replace the
* existing device; in this case the two devices are made into their own
* mirror using the 'replacing' vdev, which is functionally identical to
* the mirror vdev (it actually reuses all the same ops) but has a few
* extra rules: you can't attach to it after it's been created, and upon
* completion of resilvering, the first disk (the one being replaced)
* is automatically detached.
*/
int
spa_vdev_attach(spa_t *spa, uint64_t guid, nvlist_t *nvroot, int replacing)
{
uint64_t txg, dtl_max_txg;
ASSERTV(vdev_t *rvd = spa->spa_root_vdev);
vdev_t *oldvd, *newvd, *newrootvd, *pvd, *tvd;
vdev_ops_t *pvops;
char *oldvdpath, *newvdpath;
int newvd_isspare;
int error;
ASSERT(spa_writeable(spa));
txg = spa_vdev_enter(spa);
oldvd = spa_lookup_by_guid(spa, guid, B_FALSE);
if (spa->spa_vdev_removal != NULL)
return (spa_vdev_exit(spa, NULL, txg, EBUSY));
if (oldvd == NULL)
return (spa_vdev_exit(spa, NULL, txg, ENODEV));
if (!oldvd->vdev_ops->vdev_op_leaf)
return (spa_vdev_exit(spa, NULL, txg, ENOTSUP));
pvd = oldvd->vdev_parent;
if ((error = spa_config_parse(spa, &newrootvd, nvroot, NULL, 0,
VDEV_ALLOC_ATTACH)) != 0)
return (spa_vdev_exit(spa, NULL, txg, EINVAL));
if (newrootvd->vdev_children != 1)
return (spa_vdev_exit(spa, newrootvd, txg, EINVAL));
newvd = newrootvd->vdev_child[0];
if (!newvd->vdev_ops->vdev_op_leaf)
return (spa_vdev_exit(spa, newrootvd, txg, EINVAL));
if ((error = vdev_create(newrootvd, txg, replacing)) != 0)
return (spa_vdev_exit(spa, newrootvd, txg, error));
/*
* Spares can't replace logs
*/
if (oldvd->vdev_top->vdev_islog && newvd->vdev_isspare)
return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
if (!replacing) {
/*
* For attach, the only allowable parent is a mirror or the root
* vdev.
*/
if (pvd->vdev_ops != &vdev_mirror_ops &&
pvd->vdev_ops != &vdev_root_ops)
return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
pvops = &vdev_mirror_ops;
} else {
/*
* Active hot spares can only be replaced by inactive hot
* spares.
*/
if (pvd->vdev_ops == &vdev_spare_ops &&
oldvd->vdev_isspare &&
!spa_has_spare(spa, newvd->vdev_guid))
return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
/*
* If the source is a hot spare, and the parent isn't already a
* spare, then we want to create a new hot spare. Otherwise, we
* want to create a replacing vdev. The user is not allowed to
* attach to a spared vdev child unless the 'isspare' state is
* the same (spare replaces spare, non-spare replaces
* non-spare).
*/
if (pvd->vdev_ops == &vdev_replacing_ops &&
spa_version(spa) < SPA_VERSION_MULTI_REPLACE) {
return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
} else if (pvd->vdev_ops == &vdev_spare_ops &&
newvd->vdev_isspare != oldvd->vdev_isspare) {
return (spa_vdev_exit(spa, newrootvd, txg, ENOTSUP));
}
if (newvd->vdev_isspare)
pvops = &vdev_spare_ops;
else
pvops = &vdev_replacing_ops;
}
/*
* Make sure the new device is big enough.
*/
if (newvd->vdev_asize < vdev_get_min_asize(oldvd))
return (spa_vdev_exit(spa, newrootvd, txg, EOVERFLOW));
/*
* The new device cannot have a higher alignment requirement
* than the top-level vdev.
*/
if (newvd->vdev_ashift > oldvd->vdev_top->vdev_ashift)
return (spa_vdev_exit(spa, newrootvd, txg, EDOM));
/*
* If this is an in-place replacement, update oldvd's path and devid
* to make it distinguishable from newvd, and unopenable from now on.
*/
if (strcmp(oldvd->vdev_path, newvd->vdev_path) == 0) {
spa_strfree(oldvd->vdev_path);
oldvd->vdev_path = kmem_alloc(strlen(newvd->vdev_path) + 5,
KM_SLEEP);
(void) sprintf(oldvd->vdev_path, "%s/%s",
newvd->vdev_path, "old");
if (oldvd->vdev_devid != NULL) {
spa_strfree(oldvd->vdev_devid);
oldvd->vdev_devid = NULL;
}
}
/* mark the device being resilvered */
newvd->vdev_resilver_txg = txg;
/*
* If the parent is not a mirror, or if we're replacing, insert the new
* mirror/replacing/spare vdev above oldvd.
*/
if (pvd->vdev_ops != pvops)
pvd = vdev_add_parent(oldvd, pvops);
ASSERT(pvd->vdev_top->vdev_parent == rvd);
ASSERT(pvd->vdev_ops == pvops);
ASSERT(oldvd->vdev_parent == pvd);
/*
* Extract the new device from its root and add it to pvd.
*/
vdev_remove_child(newrootvd, newvd);
newvd->vdev_id = pvd->vdev_children;
newvd->vdev_crtxg = oldvd->vdev_crtxg;
vdev_add_child(pvd, newvd);
/*
* Reevaluate the parent vdev state.
*/
vdev_propagate_state(pvd);
tvd = newvd->vdev_top;
ASSERT(pvd->vdev_top == tvd);
ASSERT(tvd->vdev_parent == rvd);
vdev_config_dirty(tvd);
/*
* Set newvd's DTL to [TXG_INITIAL, dtl_max_txg) so that we account
* for any dmu_sync-ed blocks. It will propagate upward when
* spa_vdev_exit() calls vdev_dtl_reassess().
*/
dtl_max_txg = txg + TXG_CONCURRENT_STATES;
vdev_dtl_dirty(newvd, DTL_MISSING, TXG_INITIAL,
dtl_max_txg - TXG_INITIAL);
if (newvd->vdev_isspare) {
spa_spare_activate(newvd);
spa_event_notify(spa, newvd, NULL, ESC_ZFS_VDEV_SPARE);
}
oldvdpath = spa_strdup(oldvd->vdev_path);
newvdpath = spa_strdup(newvd->vdev_path);
newvd_isspare = newvd->vdev_isspare;
/*
* Mark newvd's DTL dirty in this txg.
*/
vdev_dirty(tvd, VDD_DTL, newvd, txg);
/*
* Schedule the resilver to restart in the future. We do this to
* ensure that dmu_sync-ed blocks have been stitched into the
* respective datasets.
*/
dsl_resilver_restart(spa->spa_dsl_pool, dtl_max_txg);
if (spa->spa_bootfs)
spa_event_notify(spa, newvd, NULL, ESC_ZFS_BOOTFS_VDEV_ATTACH);
spa_event_notify(spa, newvd, NULL, ESC_ZFS_VDEV_ATTACH);
/*
* Commit the config
*/
(void) spa_vdev_exit(spa, newrootvd, dtl_max_txg, 0);
spa_history_log_internal(spa, "vdev attach", NULL,
"%s vdev=%s %s vdev=%s",
replacing && newvd_isspare ? "spare in" :
replacing ? "replace" : "attach", newvdpath,
replacing ? "for" : "to", oldvdpath);
spa_strfree(oldvdpath);
spa_strfree(newvdpath);
return (0);
}
/*
* Detach a device from a mirror or replacing vdev.
*
* If 'replace_done' is specified, only detach if the parent
* is a replacing vdev.
*/
int
spa_vdev_detach(spa_t *spa, uint64_t guid, uint64_t pguid, int replace_done)
{
uint64_t txg;
int error;
ASSERTV(vdev_t *rvd = spa->spa_root_vdev);
vdev_t *vd, *pvd, *cvd, *tvd;
boolean_t unspare = B_FALSE;
uint64_t unspare_guid = 0;
char *vdpath;
ASSERT(spa_writeable(spa));
txg = spa_vdev_enter(spa);
vd = spa_lookup_by_guid(spa, guid, B_FALSE);
if (vd == NULL)
return (spa_vdev_exit(spa, NULL, txg, ENODEV));
if (!vd->vdev_ops->vdev_op_leaf)
return (spa_vdev_exit(spa, NULL, txg, ENOTSUP));
pvd = vd->vdev_parent;
/*
* If the parent/child relationship is not as expected, don't do it.
* Consider M(A,R(B,C)) -- that is, a mirror of A with a replacing
* vdev that's replacing B with C. The user's intent in replacing
* is to go from M(A,B) to M(A,C). If the user decides to cancel
* the replace by detaching C, the expected behavior is to end up
* M(A,B). But suppose that right after deciding to detach C,
* the replacement of B completes. We would have M(A,C), and then
* ask to detach C, which would leave us with just A -- not what
* the user wanted. To prevent this, we make sure that the
* parent/child relationship hasn't changed -- in this example,
* that C's parent is still the replacing vdev R.
*/
if (pvd->vdev_guid != pguid && pguid != 0)
return (spa_vdev_exit(spa, NULL, txg, EBUSY));
/*
* Only 'replacing' or 'spare' vdevs can be replaced.
*/
if (replace_done && pvd->vdev_ops != &vdev_replacing_ops &&
pvd->vdev_ops != &vdev_spare_ops)
return (spa_vdev_exit(spa, NULL, txg, ENOTSUP));
ASSERT(pvd->vdev_ops != &vdev_spare_ops ||
spa_version(spa) >= SPA_VERSION_SPARES);
/*
* Only mirror, replacing, and spare vdevs support detach.
*/
if (pvd->vdev_ops != &vdev_replacing_ops &&
pvd->vdev_ops != &vdev_mirror_ops &&
pvd->vdev_ops != &vdev_spare_ops)
return (spa_vdev_exit(spa, NULL, txg, ENOTSUP));
/*
* If this device has the only valid copy of some data,
* we cannot safely detach it.
*/
if (vdev_dtl_required(vd))
return (spa_vdev_exit(spa, NULL, txg, EBUSY));
ASSERT(pvd->vdev_children >= 2);
/*
* If we are detaching the second disk from a replacing vdev, then
* check to see if we changed the original vdev's path to have "/old"
* at the end in spa_vdev_attach(). If so, undo that change now.
*/
if (pvd->vdev_ops == &vdev_replacing_ops && vd->vdev_id > 0 &&
vd->vdev_path != NULL) {
size_t len = strlen(vd->vdev_path);
for (int c = 0; c < pvd->vdev_children; c++) {
cvd = pvd->vdev_child[c];
if (cvd == vd || cvd->vdev_path == NULL)
continue;
if (strncmp(cvd->vdev_path, vd->vdev_path, len) == 0 &&
strcmp(cvd->vdev_path + len, "/old") == 0) {
spa_strfree(cvd->vdev_path);
cvd->vdev_path = spa_strdup(vd->vdev_path);
break;
}
}
}
/*
* If we are detaching the original disk from a spare, then it implies
* that the spare should become a real disk, and be removed from the
* active spare list for the pool.
*/
if (pvd->vdev_ops == &vdev_spare_ops &&
vd->vdev_id == 0 &&
pvd->vdev_child[pvd->vdev_children - 1]->vdev_isspare)
unspare = B_TRUE;
/*
* Erase the disk labels so the disk can be used for other things.
* This must be done after all other error cases are handled,
* but before we disembowel vd (so we can still do I/O to it).
* But if we can't do it, don't treat the error as fatal --
* it may be that the unwritability of the disk is the reason
* it's being detached!
*/
error = vdev_label_init(vd, 0, VDEV_LABEL_REMOVE);
/*
* Remove vd from its parent and compact the parent's children.
*/
vdev_remove_child(pvd, vd);
vdev_compact_children(pvd);
/*
* Remember one of the remaining children so we can get tvd below.
*/
cvd = pvd->vdev_child[pvd->vdev_children - 1];
/*
* If we need to remove the remaining child from the list of hot spares,
* do it now, marking the vdev as no longer a spare in the process.
* We must do this before vdev_remove_parent(), because that can
* change the GUID if it creates a new toplevel GUID. For a similar
* reason, we must remove the spare now, in the same txg as the detach;
* otherwise someone could attach a new sibling, change the GUID, and
* the subsequent attempt to spa_vdev_remove(unspare_guid) would fail.
*/
if (unspare) {
ASSERT(cvd->vdev_isspare);
spa_spare_remove(cvd);
unspare_guid = cvd->vdev_guid;
(void) spa_vdev_remove(spa, unspare_guid, B_TRUE);
cvd->vdev_unspare = B_TRUE;
}
/*
* If the parent mirror/replacing vdev only has one child,
* the parent is no longer needed. Remove it from the tree.
*/
if (pvd->vdev_children == 1) {
if (pvd->vdev_ops == &vdev_spare_ops)
cvd->vdev_unspare = B_FALSE;
vdev_remove_parent(cvd);
}
/*
* We don't set tvd until now because the parent we just removed
* may have been the previous top-level vdev.
*/
tvd = cvd->vdev_top;
ASSERT(tvd->vdev_parent == rvd);
/*
* Reevaluate the parent vdev state.
*/
vdev_propagate_state(cvd);
/*
* If the 'autoexpand' property is set on the pool then automatically
* try to expand the size of the pool. For example if the device we
* just detached was smaller than the others, it may be possible to
* add metaslabs (i.e. grow the pool). We need to reopen the vdev
* first so that we can obtain the updated sizes of the leaf vdevs.
*/
if (spa->spa_autoexpand) {
vdev_reopen(tvd);
vdev_expand(tvd, txg);
}
vdev_config_dirty(tvd);
/*
* Mark vd's DTL as dirty in this txg. vdev_dtl_sync() will see that
* vd->vdev_detached is set and free vd's DTL object in syncing context.
* But first make sure we're not on any *other* txg's DTL list, to
* prevent vd from being accessed after it's freed.
*/
vdpath = spa_strdup(vd->vdev_path ? vd->vdev_path : "none");
for (int t = 0; t < TXG_SIZE; t++)
(void) txg_list_remove_this(&tvd->vdev_dtl_list, vd, t);
vd->vdev_detached = B_TRUE;
vdev_dirty(tvd, VDD_DTL, vd, txg);
spa_event_notify(spa, vd, NULL, ESC_ZFS_VDEV_REMOVE);
/* hang on to the spa before we release the lock */
spa_open_ref(spa, FTAG);
error = spa_vdev_exit(spa, vd, txg, 0);
spa_history_log_internal(spa, "detach", NULL,
"vdev=%s", vdpath);
spa_strfree(vdpath);
/*
* If this was the removal of the original device in a hot spare vdev,
* then we want to go through and remove the device from the hot spare
* list of every other pool.
*/
if (unspare) {
spa_t *altspa = NULL;
mutex_enter(&spa_namespace_lock);
while ((altspa = spa_next(altspa)) != NULL) {
if (altspa->spa_state != POOL_STATE_ACTIVE ||
altspa == spa)
continue;
spa_open_ref(altspa, FTAG);
mutex_exit(&spa_namespace_lock);
(void) spa_vdev_remove(altspa, unspare_guid, B_TRUE);
mutex_enter(&spa_namespace_lock);
spa_close(altspa, FTAG);
}
mutex_exit(&spa_namespace_lock);
/* search the rest of the vdevs for spares to remove */
spa_vdev_resilver_done(spa);
}
/* all done with the spa; OK to release */
mutex_enter(&spa_namespace_lock);
spa_close(spa, FTAG);
mutex_exit(&spa_namespace_lock);
return (error);
}
/*
* Split a set of devices from their mirrors, and create a new pool from them.
*/
int
spa_vdev_split_mirror(spa_t *spa, char *newname, nvlist_t *config,
nvlist_t *props, boolean_t exp)
{
int error = 0;
uint64_t txg, *glist;
spa_t *newspa;
uint_t c, children, lastlog;
nvlist_t **child, *nvl, *tmp;
dmu_tx_t *tx;
char *altroot = NULL;
vdev_t *rvd, **vml = NULL; /* vdev modify list */
boolean_t activate_slog;
ASSERT(spa_writeable(spa));
txg = spa_vdev_enter(spa);
/* clear the log and flush everything up to now */
activate_slog = spa_passivate_log(spa);
(void) spa_vdev_config_exit(spa, NULL, txg, 0, FTAG);
error = spa_reset_logs(spa);
txg = spa_vdev_config_enter(spa);
if (activate_slog)
spa_activate_log(spa);
if (error != 0)
return (spa_vdev_exit(spa, NULL, txg, error));
/* check new spa name before going any further */
if (spa_lookup(newname) != NULL)
return (spa_vdev_exit(spa, NULL, txg, EEXIST));
/*
* scan through all the children to ensure they're all mirrors
*/
if (nvlist_lookup_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, &nvl) != 0 ||
nvlist_lookup_nvlist_array(nvl, ZPOOL_CONFIG_CHILDREN, &child,
&children) != 0)
return (spa_vdev_exit(spa, NULL, txg, EINVAL));
/* first, check to ensure we've got the right child count */
rvd = spa->spa_root_vdev;
lastlog = 0;
for (c = 0; c < rvd->vdev_children; c++) {
vdev_t *vd = rvd->vdev_child[c];
/* don't count the holes & logs as children */
if (vd->vdev_islog || !vdev_is_concrete(vd)) {
if (lastlog == 0)
lastlog = c;
continue;
}
lastlog = 0;
}
if (children != (lastlog != 0 ? lastlog : rvd->vdev_children))
return (spa_vdev_exit(spa, NULL, txg, EINVAL));
/* next, ensure no spare or cache devices are part of the split */
if (nvlist_lookup_nvlist(nvl, ZPOOL_CONFIG_SPARES, &tmp) == 0 ||
nvlist_lookup_nvlist(nvl, ZPOOL_CONFIG_L2CACHE, &tmp) == 0)
return (spa_vdev_exit(spa, NULL, txg, EINVAL));
vml = kmem_zalloc(children * sizeof (vdev_t *), KM_SLEEP);
glist = kmem_zalloc(children * sizeof (uint64_t), KM_SLEEP);
/* then, loop over each vdev and validate it */
for (c = 0; c < children; c++) {
uint64_t is_hole = 0;
(void) nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_IS_HOLE,
&is_hole);
if (is_hole != 0) {
if (spa->spa_root_vdev->vdev_child[c]->vdev_ishole ||
spa->spa_root_vdev->vdev_child[c]->vdev_islog) {
continue;
} else {
error = SET_ERROR(EINVAL);
break;
}
}
/* which disk is going to be split? */
if (nvlist_lookup_uint64(child[c], ZPOOL_CONFIG_GUID,
&glist[c]) != 0) {
error = SET_ERROR(EINVAL);
break;
}
/* look it up in the spa */
vml[c] = spa_lookup_by_guid(spa, glist[c], B_FALSE);
if (vml[c] == NULL) {
error = SET_ERROR(ENODEV);
break;
}
/* make sure there's nothing stopping the split */
if (vml[c]->vdev_parent->vdev_ops != &vdev_mirror_ops ||
vml[c]->vdev_islog ||
!vdev_is_concrete(vml[c]) ||
vml[c]->vdev_isspare ||
vml[c]->vdev_isl2cache ||
!vdev_writeable(vml[c]) ||
vml[c]->vdev_children != 0 ||
vml[c]->vdev_state != VDEV_STATE_HEALTHY ||
c != spa->spa_root_vdev->vdev_child[c]->vdev_id) {
error = SET_ERROR(EINVAL);
break;
}
if (vdev_dtl_required(vml[c])) {
error = SET_ERROR(EBUSY);
break;
}
/* we need certain info from the top level */
VERIFY(nvlist_add_uint64(child[c], ZPOOL_CONFIG_METASLAB_ARRAY,
vml[c]->vdev_top->vdev_ms_array) == 0);
VERIFY(nvlist_add_uint64(child[c], ZPOOL_CONFIG_METASLAB_SHIFT,
vml[c]->vdev_top->vdev_ms_shift) == 0);
VERIFY(nvlist_add_uint64(child[c], ZPOOL_CONFIG_ASIZE,
vml[c]->vdev_top->vdev_asize) == 0);
VERIFY(nvlist_add_uint64(child[c], ZPOOL_CONFIG_ASHIFT,
vml[c]->vdev_top->vdev_ashift) == 0);
/* transfer per-vdev ZAPs */
ASSERT3U(vml[c]->vdev_leaf_zap, !=, 0);
VERIFY0(nvlist_add_uint64(child[c],
ZPOOL_CONFIG_VDEV_LEAF_ZAP, vml[c]->vdev_leaf_zap));
ASSERT3U(vml[c]->vdev_top->vdev_top_zap, !=, 0);
VERIFY0(nvlist_add_uint64(child[c],
ZPOOL_CONFIG_VDEV_TOP_ZAP,
vml[c]->vdev_parent->vdev_top_zap));
}
if (error != 0) {
kmem_free(vml, children * sizeof (vdev_t *));
kmem_free(glist, children * sizeof (uint64_t));
return (spa_vdev_exit(spa, NULL, txg, error));
}
/* stop writers from using the disks */
for (c = 0; c < children; c++) {
if (vml[c] != NULL)
vml[c]->vdev_offline = B_TRUE;
}
vdev_reopen(spa->spa_root_vdev);
/*
* Temporarily record the splitting vdevs in the spa config. This
* will disappear once the config is regenerated.
*/
VERIFY(nvlist_alloc(&nvl, NV_UNIQUE_NAME, KM_SLEEP) == 0);
VERIFY(nvlist_add_uint64_array(nvl, ZPOOL_CONFIG_SPLIT_LIST,
glist, children) == 0);
kmem_free(glist, children * sizeof (uint64_t));
mutex_enter(&spa->spa_props_lock);
VERIFY(nvlist_add_nvlist(spa->spa_config, ZPOOL_CONFIG_SPLIT,
nvl) == 0);
mutex_exit(&spa->spa_props_lock);
spa->spa_config_splitting = nvl;
vdev_config_dirty(spa->spa_root_vdev);
/* configure and create the new pool */
VERIFY(nvlist_add_string(config, ZPOOL_CONFIG_POOL_NAME, newname) == 0);
VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_POOL_STATE,
exp ? POOL_STATE_EXPORTED : POOL_STATE_ACTIVE) == 0);
VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_VERSION,
spa_version(spa)) == 0);
VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_POOL_TXG,
spa->spa_config_txg) == 0);
VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_POOL_GUID,
spa_generate_guid(NULL)) == 0);
VERIFY0(nvlist_add_boolean(config, ZPOOL_CONFIG_HAS_PER_VDEV_ZAPS));
(void) nvlist_lookup_string(props,
zpool_prop_to_name(ZPOOL_PROP_ALTROOT), &altroot);
/* add the new pool to the namespace */
newspa = spa_add(newname, config, altroot);
newspa->spa_avz_action = AVZ_ACTION_REBUILD;
newspa->spa_config_txg = spa->spa_config_txg;
spa_set_log_state(newspa, SPA_LOG_CLEAR);
/* release the spa config lock, retaining the namespace lock */
spa_vdev_config_exit(spa, NULL, txg, 0, FTAG);
if (zio_injection_enabled)
zio_handle_panic_injection(spa, FTAG, 1);
spa_activate(newspa, spa_mode_global);
spa_async_suspend(newspa);
/* create the new pool from the disks of the original pool */
error = spa_load(newspa, SPA_LOAD_IMPORT, SPA_IMPORT_ASSEMBLE, B_TRUE);
if (error)
goto out;
/* if that worked, generate a real config for the new pool */
if (newspa->spa_root_vdev != NULL) {
VERIFY(nvlist_alloc(&newspa->spa_config_splitting,
NV_UNIQUE_NAME, KM_SLEEP) == 0);
VERIFY(nvlist_add_uint64(newspa->spa_config_splitting,
ZPOOL_CONFIG_SPLIT_GUID, spa_guid(spa)) == 0);
spa_config_set(newspa, spa_config_generate(newspa, NULL, -1ULL,
B_TRUE));
}
/* set the props */
if (props != NULL) {
spa_configfile_set(newspa, props, B_FALSE);
error = spa_prop_set(newspa, props);
if (error)
goto out;
}
/* flush everything */
txg = spa_vdev_config_enter(newspa);
vdev_config_dirty(newspa->spa_root_vdev);
(void) spa_vdev_config_exit(newspa, NULL, txg, 0, FTAG);
if (zio_injection_enabled)
zio_handle_panic_injection(spa, FTAG, 2);
spa_async_resume(newspa);
/* finally, update the original pool's config */
txg = spa_vdev_config_enter(spa);
tx = dmu_tx_create_dd(spa_get_dsl(spa)->dp_mos_dir);
error = dmu_tx_assign(tx, TXG_WAIT);
if (error != 0)
dmu_tx_abort(tx);
for (c = 0; c < children; c++) {
if (vml[c] != NULL) {
vdev_split(vml[c]);
if (error == 0)
spa_history_log_internal(spa, "detach", tx,
"vdev=%s", vml[c]->vdev_path);
vdev_free(vml[c]);
}
}
spa->spa_avz_action = AVZ_ACTION_REBUILD;
vdev_config_dirty(spa->spa_root_vdev);
spa->spa_config_splitting = NULL;
nvlist_free(nvl);
if (error == 0)
dmu_tx_commit(tx);
(void) spa_vdev_exit(spa, NULL, txg, 0);
if (zio_injection_enabled)
zio_handle_panic_injection(spa, FTAG, 3);
/* split is complete; log a history record */
spa_history_log_internal(newspa, "split", NULL,
"from pool %s", spa_name(spa));
kmem_free(vml, children * sizeof (vdev_t *));
/* if we're not going to mount the filesystems in userland, export */
if (exp)
error = spa_export_common(newname, POOL_STATE_EXPORTED, NULL,
B_FALSE, B_FALSE);
return (error);
out:
spa_unload(newspa);
spa_deactivate(newspa);
spa_remove(newspa);
txg = spa_vdev_config_enter(spa);
/* re-online all offlined disks */
for (c = 0; c < children; c++) {
if (vml[c] != NULL)
vml[c]->vdev_offline = B_FALSE;
}
vdev_reopen(spa->spa_root_vdev);
nvlist_free(spa->spa_config_splitting);
spa->spa_config_splitting = NULL;
(void) spa_vdev_exit(spa, NULL, txg, error);
kmem_free(vml, children * sizeof (vdev_t *));
return (error);
}
/*
* Find any device that's done replacing, or a vdev marked 'unspare' that's
* currently spared, so we can detach it.
*/
static vdev_t *
spa_vdev_resilver_done_hunt(vdev_t *vd)
{
vdev_t *newvd, *oldvd;
for (int c = 0; c < vd->vdev_children; c++) {
oldvd = spa_vdev_resilver_done_hunt(vd->vdev_child[c]);
if (oldvd != NULL)
return (oldvd);
}
/*
* Check for a completed replacement. We always consider the first
* vdev in the list to be the oldest vdev, and the last one to be
* the newest (see spa_vdev_attach() for how that works). In
* the case where the newest vdev is faulted, we will not automatically
* remove it after a resilver completes. This is OK as it will require
* user intervention to determine which disk the admin wishes to keep.
*/
if (vd->vdev_ops == &vdev_replacing_ops) {
ASSERT(vd->vdev_children > 1);
newvd = vd->vdev_child[vd->vdev_children - 1];
oldvd = vd->vdev_child[0];
if (vdev_dtl_empty(newvd, DTL_MISSING) &&
vdev_dtl_empty(newvd, DTL_OUTAGE) &&
!vdev_dtl_required(oldvd))
return (oldvd);
}
/*
* Check for a completed resilver with the 'unspare' flag set.
*/
if (vd->vdev_ops == &vdev_spare_ops) {
vdev_t *first = vd->vdev_child[0];
vdev_t *last = vd->vdev_child[vd->vdev_children - 1];
if (last->vdev_unspare) {
oldvd = first;
newvd = last;
} else if (first->vdev_unspare) {
oldvd = last;
newvd = first;
} else {
oldvd = NULL;
}
if (oldvd != NULL &&
vdev_dtl_empty(newvd, DTL_MISSING) &&
vdev_dtl_empty(newvd, DTL_OUTAGE) &&
!vdev_dtl_required(oldvd))
return (oldvd);
/*
* If there are more than two spares attached to a disk,
* and those spares are not required, then we want to
* attempt to free them up now so that they can be used
* by other pools. Once we're back down to a single
* disk+spare, we stop removing them.
*/
if (vd->vdev_children > 2) {
newvd = vd->vdev_child[1];
if (newvd->vdev_isspare && last->vdev_isspare &&
vdev_dtl_empty(last, DTL_MISSING) &&
vdev_dtl_empty(last, DTL_OUTAGE) &&
!vdev_dtl_required(newvd))
return (newvd);
}
}
return (NULL);
}
static void
spa_vdev_resilver_done(spa_t *spa)
{
vdev_t *vd, *pvd, *ppvd;
uint64_t guid, sguid, pguid, ppguid;
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
while ((vd = spa_vdev_resilver_done_hunt(spa->spa_root_vdev)) != NULL) {
pvd = vd->vdev_parent;
ppvd = pvd->vdev_parent;
guid = vd->vdev_guid;
pguid = pvd->vdev_guid;
ppguid = ppvd->vdev_guid;
sguid = 0;
/*
* If we have just finished replacing a hot spared device, then
* we need to detach the parent's first child (the original hot
* spare) as well.
*/
if (ppvd->vdev_ops == &vdev_spare_ops && pvd->vdev_id == 0 &&
ppvd->vdev_children == 2) {
ASSERT(pvd->vdev_ops == &vdev_replacing_ops);
sguid = ppvd->vdev_child[1]->vdev_guid;
}
ASSERT(vd->vdev_resilver_txg == 0 || !vdev_dtl_required(vd));
spa_config_exit(spa, SCL_ALL, FTAG);
if (spa_vdev_detach(spa, guid, pguid, B_TRUE) != 0)
return;
if (sguid && spa_vdev_detach(spa, sguid, ppguid, B_TRUE) != 0)
return;
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
}
spa_config_exit(spa, SCL_ALL, FTAG);
}
/*
* Update the stored path or FRU for this vdev.
*/
int
spa_vdev_set_common(spa_t *spa, uint64_t guid, const char *value,
boolean_t ispath)
{
vdev_t *vd;
boolean_t sync = B_FALSE;
ASSERT(spa_writeable(spa));
spa_vdev_state_enter(spa, SCL_ALL);
if ((vd = spa_lookup_by_guid(spa, guid, B_TRUE)) == NULL)
return (spa_vdev_state_exit(spa, NULL, ENOENT));
if (!vd->vdev_ops->vdev_op_leaf)
return (spa_vdev_state_exit(spa, NULL, ENOTSUP));
if (ispath) {
if (strcmp(value, vd->vdev_path) != 0) {
spa_strfree(vd->vdev_path);
vd->vdev_path = spa_strdup(value);
sync = B_TRUE;
}
} else {
if (vd->vdev_fru == NULL) {
vd->vdev_fru = spa_strdup(value);
sync = B_TRUE;
} else if (strcmp(value, vd->vdev_fru) != 0) {
spa_strfree(vd->vdev_fru);
vd->vdev_fru = spa_strdup(value);
sync = B_TRUE;
}
}
return (spa_vdev_state_exit(spa, sync ? vd : NULL, 0));
}
int
spa_vdev_setpath(spa_t *spa, uint64_t guid, const char *newpath)
{
return (spa_vdev_set_common(spa, guid, newpath, B_TRUE));
}
int
spa_vdev_setfru(spa_t *spa, uint64_t guid, const char *newfru)
{
return (spa_vdev_set_common(spa, guid, newfru, B_FALSE));
}
/*
* ==========================================================================
* SPA Scanning
* ==========================================================================
*/
int
spa_scrub_pause_resume(spa_t *spa, pool_scrub_cmd_t cmd)
{
ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == 0);
if (dsl_scan_resilvering(spa->spa_dsl_pool))
return (SET_ERROR(EBUSY));
return (dsl_scrub_set_pause_resume(spa->spa_dsl_pool, cmd));
}
int
spa_scan_stop(spa_t *spa)
{
ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == 0);
if (dsl_scan_resilvering(spa->spa_dsl_pool))
return (SET_ERROR(EBUSY));
return (dsl_scan_cancel(spa->spa_dsl_pool));
}
int
spa_scan(spa_t *spa, pool_scan_func_t func)
{
ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == 0);
if (func >= POOL_SCAN_FUNCS || func == POOL_SCAN_NONE)
return (SET_ERROR(ENOTSUP));
/*
* If a resilver was requested, but there is no DTL on a
* writeable leaf device, we have nothing to do.
*/
if (func == POOL_SCAN_RESILVER &&
!vdev_resilver_needed(spa->spa_root_vdev, NULL, NULL)) {
spa_async_request(spa, SPA_ASYNC_RESILVER_DONE);
return (0);
}
return (dsl_scan(spa->spa_dsl_pool, func));
}
/*
* ==========================================================================
* SPA async task processing
* ==========================================================================
*/
static void
spa_async_remove(spa_t *spa, vdev_t *vd)
{
if (vd->vdev_remove_wanted) {
vd->vdev_remove_wanted = B_FALSE;
vd->vdev_delayed_close = B_FALSE;
vdev_set_state(vd, B_FALSE, VDEV_STATE_REMOVED, VDEV_AUX_NONE);
/*
* We want to clear the stats, but we don't want to do a full
* vdev_clear() as that will cause us to throw away
* degraded/faulted state as well as attempt to reopen the
* device, all of which is a waste.
*/
vd->vdev_stat.vs_read_errors = 0;
vd->vdev_stat.vs_write_errors = 0;
vd->vdev_stat.vs_checksum_errors = 0;
vdev_state_dirty(vd->vdev_top);
}
for (int c = 0; c < vd->vdev_children; c++)
spa_async_remove(spa, vd->vdev_child[c]);
}
static void
spa_async_probe(spa_t *spa, vdev_t *vd)
{
if (vd->vdev_probe_wanted) {
vd->vdev_probe_wanted = B_FALSE;
vdev_reopen(vd); /* vdev_open() does the actual probe */
}
for (int c = 0; c < vd->vdev_children; c++)
spa_async_probe(spa, vd->vdev_child[c]);
}
static void
spa_async_autoexpand(spa_t *spa, vdev_t *vd)
{
if (!spa->spa_autoexpand)
return;
for (int c = 0; c < vd->vdev_children; c++) {
vdev_t *cvd = vd->vdev_child[c];
spa_async_autoexpand(spa, cvd);
}
if (!vd->vdev_ops->vdev_op_leaf || vd->vdev_physpath == NULL)
return;
spa_event_notify(vd->vdev_spa, vd, NULL, ESC_ZFS_VDEV_AUTOEXPAND);
}
static void
spa_async_thread(void *arg)
{
spa_t *spa = (spa_t *)arg;
int tasks;
ASSERT(spa->spa_sync_on);
mutex_enter(&spa->spa_async_lock);
tasks = spa->spa_async_tasks;
spa->spa_async_tasks = 0;
mutex_exit(&spa->spa_async_lock);
/*
* See if the config needs to be updated.
*/
if (tasks & SPA_ASYNC_CONFIG_UPDATE) {
uint64_t old_space, new_space;
mutex_enter(&spa_namespace_lock);
old_space = metaslab_class_get_space(spa_normal_class(spa));
spa_config_update(spa, SPA_CONFIG_UPDATE_POOL);
new_space = metaslab_class_get_space(spa_normal_class(spa));
mutex_exit(&spa_namespace_lock);
/*
* If the pool grew as a result of the config update,
* then log an internal history event.
*/
if (new_space != old_space) {
spa_history_log_internal(spa, "vdev online", NULL,
"pool '%s' size: %llu(+%llu)",
spa_name(spa), new_space, new_space - old_space);
}
}
/*
* See if any devices need to be marked REMOVED.
*/
if (tasks & SPA_ASYNC_REMOVE) {
spa_vdev_state_enter(spa, SCL_NONE);
spa_async_remove(spa, spa->spa_root_vdev);
for (int i = 0; i < spa->spa_l2cache.sav_count; i++)
spa_async_remove(spa, spa->spa_l2cache.sav_vdevs[i]);
for (int i = 0; i < spa->spa_spares.sav_count; i++)
spa_async_remove(spa, spa->spa_spares.sav_vdevs[i]);
(void) spa_vdev_state_exit(spa, NULL, 0);
}
if ((tasks & SPA_ASYNC_AUTOEXPAND) && !spa_suspended(spa)) {
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
spa_async_autoexpand(spa, spa->spa_root_vdev);
spa_config_exit(spa, SCL_CONFIG, FTAG);
}
/*
* See if any devices need to be probed.
*/
if (tasks & SPA_ASYNC_PROBE) {
spa_vdev_state_enter(spa, SCL_NONE);
spa_async_probe(spa, spa->spa_root_vdev);
(void) spa_vdev_state_exit(spa, NULL, 0);
}
/*
* If any devices are done replacing, detach them.
*/
if (tasks & SPA_ASYNC_RESILVER_DONE)
spa_vdev_resilver_done(spa);
/*
* Kick off a resilver.
*/
if (tasks & SPA_ASYNC_RESILVER)
dsl_resilver_restart(spa->spa_dsl_pool, 0);
/*
* Let the world know that we're done.
*/
mutex_enter(&spa->spa_async_lock);
spa->spa_async_thread = NULL;
cv_broadcast(&spa->spa_async_cv);
mutex_exit(&spa->spa_async_lock);
thread_exit();
}
void
spa_async_suspend(spa_t *spa)
{
mutex_enter(&spa->spa_async_lock);
spa->spa_async_suspended++;
while (spa->spa_async_thread != NULL ||
spa->spa_condense_thread != NULL)
cv_wait(&spa->spa_async_cv, &spa->spa_async_lock);
mutex_exit(&spa->spa_async_lock);
spa_vdev_remove_suspend(spa);
}
void
spa_async_resume(spa_t *spa)
{
mutex_enter(&spa->spa_async_lock);
ASSERT(spa->spa_async_suspended != 0);
spa->spa_async_suspended--;
mutex_exit(&spa->spa_async_lock);
spa_restart_removal(spa);
}
static boolean_t
spa_async_tasks_pending(spa_t *spa)
{
uint_t non_config_tasks;
uint_t config_task;
boolean_t config_task_suspended;
non_config_tasks = spa->spa_async_tasks & ~SPA_ASYNC_CONFIG_UPDATE;
config_task = spa->spa_async_tasks & SPA_ASYNC_CONFIG_UPDATE;
if (spa->spa_ccw_fail_time == 0) {
config_task_suspended = B_FALSE;
} else {
config_task_suspended =
(gethrtime() - spa->spa_ccw_fail_time) <
((hrtime_t)zfs_ccw_retry_interval * NANOSEC);
}
return (non_config_tasks || (config_task && !config_task_suspended));
}
static void
spa_async_dispatch(spa_t *spa)
{
mutex_enter(&spa->spa_async_lock);
if (spa_async_tasks_pending(spa) &&
!spa->spa_async_suspended &&
spa->spa_async_thread == NULL &&
rootdir != NULL)
spa->spa_async_thread = thread_create(NULL, 0,
spa_async_thread, spa, 0, &p0, TS_RUN, maxclsyspri);
mutex_exit(&spa->spa_async_lock);
}
void
spa_async_request(spa_t *spa, int task)
{
zfs_dbgmsg("spa=%s async request task=%u", spa->spa_name, task);
mutex_enter(&spa->spa_async_lock);
spa->spa_async_tasks |= task;
mutex_exit(&spa->spa_async_lock);
}
/*
* ==========================================================================
* SPA syncing routines
* ==========================================================================
*/
static int
bpobj_enqueue_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
bpobj_t *bpo = arg;
bpobj_enqueue(bpo, bp, tx);
return (0);
}
static int
spa_free_sync_cb(void *arg, const blkptr_t *bp, dmu_tx_t *tx)
{
zio_t *zio = arg;
zio_nowait(zio_free_sync(zio, zio->io_spa, dmu_tx_get_txg(tx), bp,
zio->io_flags));
return (0);
}
/*
* Note: this simple function is not inlined to make it easier to dtrace the
* amount of time spent syncing frees.
*/
static void
spa_sync_frees(spa_t *spa, bplist_t *bpl, dmu_tx_t *tx)
{
zio_t *zio = zio_root(spa, NULL, NULL, 0);
bplist_iterate(bpl, spa_free_sync_cb, zio, tx);
VERIFY(zio_wait(zio) == 0);
}
/*
* Note: this simple function is not inlined to make it easier to dtrace the
* amount of time spent syncing deferred frees.
*/
static void
spa_sync_deferred_frees(spa_t *spa, dmu_tx_t *tx)
{
zio_t *zio = zio_root(spa, NULL, NULL, 0);
VERIFY3U(bpobj_iterate(&spa->spa_deferred_bpobj,
spa_free_sync_cb, zio, tx), ==, 0);
VERIFY0(zio_wait(zio));
}
static void
spa_sync_nvlist(spa_t *spa, uint64_t obj, nvlist_t *nv, dmu_tx_t *tx)
{
char *packed = NULL;
size_t bufsize;
size_t nvsize = 0;
dmu_buf_t *db;
VERIFY(nvlist_size(nv, &nvsize, NV_ENCODE_XDR) == 0);
/*
* Write full (SPA_CONFIG_BLOCKSIZE) blocks of configuration
* information. This avoids the dmu_buf_will_dirty() path and
* saves us a pre-read to get data we don't actually care about.
*/
bufsize = P2ROUNDUP((uint64_t)nvsize, SPA_CONFIG_BLOCKSIZE);
packed = vmem_alloc(bufsize, KM_SLEEP);
VERIFY(nvlist_pack(nv, &packed, &nvsize, NV_ENCODE_XDR,
KM_SLEEP) == 0);
bzero(packed + nvsize, bufsize - nvsize);
dmu_write(spa->spa_meta_objset, obj, 0, bufsize, packed, tx);
vmem_free(packed, bufsize);
VERIFY(0 == dmu_bonus_hold(spa->spa_meta_objset, obj, FTAG, &db));
dmu_buf_will_dirty(db, tx);
*(uint64_t *)db->db_data = nvsize;
dmu_buf_rele(db, FTAG);
}
static void
spa_sync_aux_dev(spa_t *spa, spa_aux_vdev_t *sav, dmu_tx_t *tx,
const char *config, const char *entry)
{
nvlist_t *nvroot;
nvlist_t **list;
int i;
if (!sav->sav_sync)
return;
/*
* Update the MOS nvlist describing the list of available devices.
* spa_validate_aux() will have already made sure this nvlist is
* valid and the vdevs are labeled appropriately.
*/
if (sav->sav_object == 0) {
sav->sav_object = dmu_object_alloc(spa->spa_meta_objset,
DMU_OT_PACKED_NVLIST, 1 << 14, DMU_OT_PACKED_NVLIST_SIZE,
sizeof (uint64_t), tx);
VERIFY(zap_update(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, entry, sizeof (uint64_t), 1,
&sav->sav_object, tx) == 0);
}
VERIFY(nvlist_alloc(&nvroot, NV_UNIQUE_NAME, KM_SLEEP) == 0);
if (sav->sav_count == 0) {
VERIFY(nvlist_add_nvlist_array(nvroot, config, NULL, 0) == 0);
} else {
list = kmem_alloc(sav->sav_count*sizeof (void *), KM_SLEEP);
for (i = 0; i < sav->sav_count; i++)
list[i] = vdev_config_generate(spa, sav->sav_vdevs[i],
B_FALSE, VDEV_CONFIG_L2CACHE);
VERIFY(nvlist_add_nvlist_array(nvroot, config, list,
sav->sav_count) == 0);
for (i = 0; i < sav->sav_count; i++)
nvlist_free(list[i]);
kmem_free(list, sav->sav_count * sizeof (void *));
}
spa_sync_nvlist(spa, sav->sav_object, nvroot, tx);
nvlist_free(nvroot);
sav->sav_sync = B_FALSE;
}
/*
* Rebuild spa's all-vdev ZAP from the vdev ZAPs indicated in each vdev_t.
* The all-vdev ZAP must be empty.
*/
static void
spa_avz_build(vdev_t *vd, uint64_t avz, dmu_tx_t *tx)
{
spa_t *spa = vd->vdev_spa;
if (vd->vdev_top_zap != 0) {
VERIFY0(zap_add_int(spa->spa_meta_objset, avz,
vd->vdev_top_zap, tx));
}
if (vd->vdev_leaf_zap != 0) {
VERIFY0(zap_add_int(spa->spa_meta_objset, avz,
vd->vdev_leaf_zap, tx));
}
for (uint64_t i = 0; i < vd->vdev_children; i++) {
spa_avz_build(vd->vdev_child[i], avz, tx);
}
}
static void
spa_sync_config_object(spa_t *spa, dmu_tx_t *tx)
{
nvlist_t *config;
/*
* If the pool is being imported from a pre-per-vdev-ZAP version of ZFS,
* its config may not be dirty but we still need to build per-vdev ZAPs.
* Similarly, if the pool is being assembled (e.g. after a split), we
* need to rebuild the AVZ although the config may not be dirty.
*/
if (list_is_empty(&spa->spa_config_dirty_list) &&
spa->spa_avz_action == AVZ_ACTION_NONE)
return;
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
ASSERT(spa->spa_avz_action == AVZ_ACTION_NONE ||
spa->spa_avz_action == AVZ_ACTION_INITIALIZE ||
spa->spa_all_vdev_zaps != 0);
if (spa->spa_avz_action == AVZ_ACTION_REBUILD) {
/* Make and build the new AVZ */
uint64_t new_avz = zap_create(spa->spa_meta_objset,
DMU_OTN_ZAP_METADATA, DMU_OT_NONE, 0, tx);
spa_avz_build(spa->spa_root_vdev, new_avz, tx);
/* Diff old AVZ with new one */
zap_cursor_t zc;
zap_attribute_t za;
for (zap_cursor_init(&zc, spa->spa_meta_objset,
spa->spa_all_vdev_zaps);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
uint64_t vdzap = za.za_first_integer;
if (zap_lookup_int(spa->spa_meta_objset, new_avz,
vdzap) == ENOENT) {
/*
* ZAP is listed in old AVZ but not in new one;
* destroy it
*/
VERIFY0(zap_destroy(spa->spa_meta_objset, vdzap,
tx));
}
}
zap_cursor_fini(&zc);
/* Destroy the old AVZ */
VERIFY0(zap_destroy(spa->spa_meta_objset,
spa->spa_all_vdev_zaps, tx));
/* Replace the old AVZ in the dir obj with the new one */
VERIFY0(zap_update(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_VDEV_ZAP_MAP,
sizeof (new_avz), 1, &new_avz, tx));
spa->spa_all_vdev_zaps = new_avz;
} else if (spa->spa_avz_action == AVZ_ACTION_DESTROY) {
zap_cursor_t zc;
zap_attribute_t za;
/* Walk through the AVZ and destroy all listed ZAPs */
for (zap_cursor_init(&zc, spa->spa_meta_objset,
spa->spa_all_vdev_zaps);
zap_cursor_retrieve(&zc, &za) == 0;
zap_cursor_advance(&zc)) {
uint64_t zap = za.za_first_integer;
VERIFY0(zap_destroy(spa->spa_meta_objset, zap, tx));
}
zap_cursor_fini(&zc);
/* Destroy and unlink the AVZ itself */
VERIFY0(zap_destroy(spa->spa_meta_objset,
spa->spa_all_vdev_zaps, tx));
VERIFY0(zap_remove(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_VDEV_ZAP_MAP, tx));
spa->spa_all_vdev_zaps = 0;
}
if (spa->spa_all_vdev_zaps == 0) {
spa->spa_all_vdev_zaps = zap_create_link(spa->spa_meta_objset,
DMU_OTN_ZAP_METADATA, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_VDEV_ZAP_MAP, tx);
}
spa->spa_avz_action = AVZ_ACTION_NONE;
/* Create ZAPs for vdevs that don't have them. */
vdev_construct_zaps(spa->spa_root_vdev, tx);
config = spa_config_generate(spa, spa->spa_root_vdev,
dmu_tx_get_txg(tx), B_FALSE);
/*
* If we're upgrading the spa version then make sure that
* the config object gets updated with the correct version.
*/
if (spa->spa_ubsync.ub_version < spa->spa_uberblock.ub_version)
fnvlist_add_uint64(config, ZPOOL_CONFIG_VERSION,
spa->spa_uberblock.ub_version);
spa_config_exit(spa, SCL_STATE, FTAG);
nvlist_free(spa->spa_config_syncing);
spa->spa_config_syncing = config;
spa_sync_nvlist(spa, spa->spa_config_object, config, tx);
}
static void
spa_sync_version(void *arg, dmu_tx_t *tx)
{
uint64_t *versionp = arg;
uint64_t version = *versionp;
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
/*
* Setting the version is special cased when first creating the pool.
*/
ASSERT(tx->tx_txg != TXG_INITIAL);
ASSERT(SPA_VERSION_IS_SUPPORTED(version));
ASSERT(version >= spa_version(spa));
spa->spa_uberblock.ub_version = version;
vdev_config_dirty(spa->spa_root_vdev);
spa_history_log_internal(spa, "set", tx, "version=%lld", version);
}
/*
* Set zpool properties.
*/
static void
spa_sync_props(void *arg, dmu_tx_t *tx)
{
nvlist_t *nvp = arg;
spa_t *spa = dmu_tx_pool(tx)->dp_spa;
objset_t *mos = spa->spa_meta_objset;
nvpair_t *elem = NULL;
mutex_enter(&spa->spa_props_lock);
while ((elem = nvlist_next_nvpair(nvp, elem))) {
uint64_t intval;
char *strval, *fname;
zpool_prop_t prop;
const char *propname;
zprop_type_t proptype;
spa_feature_t fid;
switch (prop = zpool_name_to_prop(nvpair_name(elem))) {
case ZPOOL_PROP_INVAL:
/*
* We checked this earlier in spa_prop_validate().
*/
ASSERT(zpool_prop_feature(nvpair_name(elem)));
fname = strchr(nvpair_name(elem), '@') + 1;
VERIFY0(zfeature_lookup_name(fname, &fid));
spa_feature_enable(spa, fid, tx);
spa_history_log_internal(spa, "set", tx,
"%s=enabled", nvpair_name(elem));
break;
case ZPOOL_PROP_VERSION:
intval = fnvpair_value_uint64(elem);
/*
* The version is synced separately before other
* properties and should be correct by now.
*/
ASSERT3U(spa_version(spa), >=, intval);
break;
case ZPOOL_PROP_ALTROOT:
/*
* 'altroot' is a non-persistent property. It should
* have been set temporarily at creation or import time.
*/
ASSERT(spa->spa_root != NULL);
break;
case ZPOOL_PROP_READONLY:
case ZPOOL_PROP_CACHEFILE:
/*
* 'readonly' and 'cachefile' are also non-persisitent
* properties.
*/
break;
case ZPOOL_PROP_COMMENT:
strval = fnvpair_value_string(elem);
if (spa->spa_comment != NULL)
spa_strfree(spa->spa_comment);
spa->spa_comment = spa_strdup(strval);
/*
* We need to dirty the configuration on all the vdevs
* so that their labels get updated. It's unnecessary
* to do this for pool creation since the vdev's
* configuration has already been dirtied.
*/
if (tx->tx_txg != TXG_INITIAL)
vdev_config_dirty(spa->spa_root_vdev);
spa_history_log_internal(spa, "set", tx,
"%s=%s", nvpair_name(elem), strval);
break;
default:
/*
* Set pool property values in the poolprops mos object.
*/
if (spa->spa_pool_props_object == 0) {
spa->spa_pool_props_object =
zap_create_link(mos, DMU_OT_POOL_PROPS,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_PROPS,
tx);
}
/* normalize the property name */
propname = zpool_prop_to_name(prop);
proptype = zpool_prop_get_type(prop);
if (nvpair_type(elem) == DATA_TYPE_STRING) {
ASSERT(proptype == PROP_TYPE_STRING);
strval = fnvpair_value_string(elem);
VERIFY0(zap_update(mos,
spa->spa_pool_props_object, propname,
1, strlen(strval) + 1, strval, tx));
spa_history_log_internal(spa, "set", tx,
"%s=%s", nvpair_name(elem), strval);
} else if (nvpair_type(elem) == DATA_TYPE_UINT64) {
intval = fnvpair_value_uint64(elem);
if (proptype == PROP_TYPE_INDEX) {
const char *unused;
VERIFY0(zpool_prop_index_to_string(
prop, intval, &unused));
}
VERIFY0(zap_update(mos,
spa->spa_pool_props_object, propname,
8, 1, &intval, tx));
spa_history_log_internal(spa, "set", tx,
"%s=%lld", nvpair_name(elem), intval);
} else {
ASSERT(0); /* not allowed */
}
switch (prop) {
case ZPOOL_PROP_DELEGATION:
spa->spa_delegation = intval;
break;
case ZPOOL_PROP_BOOTFS:
spa->spa_bootfs = intval;
break;
case ZPOOL_PROP_FAILUREMODE:
spa->spa_failmode = intval;
break;
case ZPOOL_PROP_AUTOEXPAND:
spa->spa_autoexpand = intval;
if (tx->tx_txg != TXG_INITIAL)
spa_async_request(spa,
SPA_ASYNC_AUTOEXPAND);
break;
case ZPOOL_PROP_MULTIHOST:
spa->spa_multihost = intval;
break;
case ZPOOL_PROP_DEDUPDITTO:
spa->spa_dedup_ditto = intval;
break;
default:
break;
}
}
}
mutex_exit(&spa->spa_props_lock);
}
/*
* Perform one-time upgrade on-disk changes. spa_version() does not
* reflect the new version this txg, so there must be no changes this
* txg to anything that the upgrade code depends on after it executes.
* Therefore this must be called after dsl_pool_sync() does the sync
* tasks.
*/
static void
spa_sync_upgrades(spa_t *spa, dmu_tx_t *tx)
{
dsl_pool_t *dp = spa->spa_dsl_pool;
ASSERT(spa->spa_sync_pass == 1);
rrw_enter(&dp->dp_config_rwlock, RW_WRITER, FTAG);
if (spa->spa_ubsync.ub_version < SPA_VERSION_ORIGIN &&
spa->spa_uberblock.ub_version >= SPA_VERSION_ORIGIN) {
dsl_pool_create_origin(dp, tx);
/* Keeping the origin open increases spa_minref */
spa->spa_minref += 3;
}
if (spa->spa_ubsync.ub_version < SPA_VERSION_NEXT_CLONES &&
spa->spa_uberblock.ub_version >= SPA_VERSION_NEXT_CLONES) {
dsl_pool_upgrade_clones(dp, tx);
}
if (spa->spa_ubsync.ub_version < SPA_VERSION_DIR_CLONES &&
spa->spa_uberblock.ub_version >= SPA_VERSION_DIR_CLONES) {
dsl_pool_upgrade_dir_clones(dp, tx);
/* Keeping the freedir open increases spa_minref */
spa->spa_minref += 3;
}
if (spa->spa_ubsync.ub_version < SPA_VERSION_FEATURES &&
spa->spa_uberblock.ub_version >= SPA_VERSION_FEATURES) {
spa_feature_create_zap_objects(spa, tx);
}
/*
* LZ4_COMPRESS feature's behaviour was changed to activate_on_enable
* when possibility to use lz4 compression for metadata was added
* Old pools that have this feature enabled must be upgraded to have
* this feature active
*/
if (spa->spa_uberblock.ub_version >= SPA_VERSION_FEATURES) {
boolean_t lz4_en = spa_feature_is_enabled(spa,
SPA_FEATURE_LZ4_COMPRESS);
boolean_t lz4_ac = spa_feature_is_active(spa,
SPA_FEATURE_LZ4_COMPRESS);
if (lz4_en && !lz4_ac)
spa_feature_incr(spa, SPA_FEATURE_LZ4_COMPRESS, tx);
}
/*
* If we haven't written the salt, do so now. Note that the
* feature may not be activated yet, but that's fine since
* the presence of this ZAP entry is backwards compatible.
*/
if (zap_contains(spa->spa_meta_objset, DMU_POOL_DIRECTORY_OBJECT,
DMU_POOL_CHECKSUM_SALT) == ENOENT) {
VERIFY0(zap_add(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_CHECKSUM_SALT, 1,
sizeof (spa->spa_cksum_salt.zcs_bytes),
spa->spa_cksum_salt.zcs_bytes, tx));
}
rrw_exit(&dp->dp_config_rwlock, FTAG);
}
static void
vdev_indirect_state_sync_verify(vdev_t *vd)
{
ASSERTV(vdev_indirect_mapping_t *vim = vd->vdev_indirect_mapping);
ASSERTV(vdev_indirect_births_t *vib = vd->vdev_indirect_births);
if (vd->vdev_ops == &vdev_indirect_ops) {
ASSERT(vim != NULL);
ASSERT(vib != NULL);
}
if (vdev_obsolete_sm_object(vd) != 0) {
ASSERT(vd->vdev_obsolete_sm != NULL);
ASSERT(vd->vdev_removing ||
vd->vdev_ops == &vdev_indirect_ops);
ASSERT(vdev_indirect_mapping_num_entries(vim) > 0);
ASSERT(vdev_indirect_mapping_bytes_mapped(vim) > 0);
ASSERT3U(vdev_obsolete_sm_object(vd), ==,
space_map_object(vd->vdev_obsolete_sm));
ASSERT3U(vdev_indirect_mapping_bytes_mapped(vim), >=,
space_map_allocated(vd->vdev_obsolete_sm));
}
ASSERT(vd->vdev_obsolete_segments != NULL);
/*
* Since frees / remaps to an indirect vdev can only
* happen in syncing context, the obsolete segments
* tree must be empty when we start syncing.
*/
ASSERT0(range_tree_space(vd->vdev_obsolete_segments));
}
/*
* Sync the specified transaction group. New blocks may be dirtied as
* part of the process, so we iterate until it converges.
*/
void
spa_sync(spa_t *spa, uint64_t txg)
{
dsl_pool_t *dp = spa->spa_dsl_pool;
objset_t *mos = spa->spa_meta_objset;
bplist_t *free_bpl = &spa->spa_free_bplist[txg & TXG_MASK];
vdev_t *rvd = spa->spa_root_vdev;
vdev_t *vd;
dmu_tx_t *tx;
int error;
uint32_t max_queue_depth = zfs_vdev_async_write_max_active *
zfs_vdev_queue_depth_pct / 100;
VERIFY(spa_writeable(spa));
/*
* Wait for i/os issued in open context that need to complete
* before this txg syncs.
*/
VERIFY0(zio_wait(spa->spa_txg_zio[txg & TXG_MASK]));
spa->spa_txg_zio[txg & TXG_MASK] = zio_root(spa, NULL, NULL, 0);
/*
* Lock out configuration changes.
*/
spa_config_enter(spa, SCL_CONFIG, FTAG, RW_READER);
spa->spa_syncing_txg = txg;
spa->spa_sync_pass = 0;
mutex_enter(&spa->spa_alloc_lock);
VERIFY0(avl_numnodes(&spa->spa_alloc_tree));
mutex_exit(&spa->spa_alloc_lock);
/*
* If there are any pending vdev state changes, convert them
* into config changes that go out with this transaction group.
*/
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
while (list_head(&spa->spa_state_dirty_list) != NULL) {
/*
* We need the write lock here because, for aux vdevs,
* calling vdev_config_dirty() modifies sav_config.
* This is ugly and will become unnecessary when we
* eliminate the aux vdev wart by integrating all vdevs
* into the root vdev tree.
*/
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_WRITER);
while ((vd = list_head(&spa->spa_state_dirty_list)) != NULL) {
vdev_state_clean(vd);
vdev_config_dirty(vd);
}
spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER);
}
spa_config_exit(spa, SCL_STATE, FTAG);
tx = dmu_tx_create_assigned(dp, txg);
spa->spa_sync_starttime = gethrtime();
taskq_cancel_id(system_delay_taskq, spa->spa_deadman_tqid);
spa->spa_deadman_tqid = taskq_dispatch_delay(system_delay_taskq,
spa_deadman, spa, TQ_SLEEP, ddi_get_lbolt() +
NSEC_TO_TICK(spa->spa_deadman_synctime));
/*
* If we are upgrading to SPA_VERSION_RAIDZ_DEFLATE this txg,
* set spa_deflate if we have no raid-z vdevs.
*/
if (spa->spa_ubsync.ub_version < SPA_VERSION_RAIDZ_DEFLATE &&
spa->spa_uberblock.ub_version >= SPA_VERSION_RAIDZ_DEFLATE) {
int i;
for (i = 0; i < rvd->vdev_children; i++) {
vd = rvd->vdev_child[i];
if (vd->vdev_deflate_ratio != SPA_MINBLOCKSIZE)
break;
}
if (i == rvd->vdev_children) {
spa->spa_deflate = TRUE;
VERIFY(0 == zap_add(spa->spa_meta_objset,
DMU_POOL_DIRECTORY_OBJECT, DMU_POOL_DEFLATE,
sizeof (uint64_t), 1, &spa->spa_deflate, tx));
}
}
/*
* Set the top-level vdev's max queue depth. Evaluate each
* top-level's async write queue depth in case it changed.
* The max queue depth will not change in the middle of syncing
* out this txg.
*/
uint64_t queue_depth_total = 0;
for (int c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
if (mg == NULL || mg->mg_class != spa_normal_class(spa) ||
!metaslab_group_initialized(mg))
continue;
/*
* It is safe to do a lock-free check here because only async
* allocations look at mg_max_alloc_queue_depth, and async
* allocations all happen from spa_sync().
*/
ASSERT0(refcount_count(&mg->mg_alloc_queue_depth));
mg->mg_max_alloc_queue_depth = max_queue_depth;
queue_depth_total += mg->mg_max_alloc_queue_depth;
}
metaslab_class_t *mc = spa_normal_class(spa);
ASSERT0(refcount_count(&mc->mc_alloc_slots));
mc->mc_alloc_max_slots = queue_depth_total;
mc->mc_alloc_throttle_enabled = zio_dva_throttle_enabled;
ASSERT3U(mc->mc_alloc_max_slots, <=,
max_queue_depth * rvd->vdev_children);
for (int c = 0; c < rvd->vdev_children; c++) {
vdev_t *vd = rvd->vdev_child[c];
vdev_indirect_state_sync_verify(vd);
if (vdev_indirect_should_condense(vd)) {
spa_condense_indirect_start_sync(vd, tx);
break;
}
}
/*
* Iterate to convergence.
*/
do {
int pass = ++spa->spa_sync_pass;
spa_sync_config_object(spa, tx);
spa_sync_aux_dev(spa, &spa->spa_spares, tx,
ZPOOL_CONFIG_SPARES, DMU_POOL_SPARES);
spa_sync_aux_dev(spa, &spa->spa_l2cache, tx,
ZPOOL_CONFIG_L2CACHE, DMU_POOL_L2CACHE);
spa_errlog_sync(spa, txg);
dsl_pool_sync(dp, txg);
if (pass < zfs_sync_pass_deferred_free) {
spa_sync_frees(spa, free_bpl, tx);
} else {
/*
* We can not defer frees in pass 1, because
* we sync the deferred frees later in pass 1.
*/
ASSERT3U(pass, >, 1);
bplist_iterate(free_bpl, bpobj_enqueue_cb,
&spa->spa_deferred_bpobj, tx);
}
ddt_sync(spa, txg);
dsl_scan_sync(dp, tx);
if (spa->spa_vdev_removal != NULL)
svr_sync(spa, tx);
while ((vd = txg_list_remove(&spa->spa_vdev_txg_list, txg))
!= NULL)
vdev_sync(vd, txg);
if (pass == 1) {
spa_sync_upgrades(spa, tx);
ASSERT3U(txg, >=,
spa->spa_uberblock.ub_rootbp.blk_birth);
/*
* Note: We need to check if the MOS is dirty
* because we could have marked the MOS dirty
* without updating the uberblock (e.g. if we
* have sync tasks but no dirty user data). We
* need to check the uberblock's rootbp because
* it is updated if we have synced out dirty
* data (though in this case the MOS will most
* likely also be dirty due to second order
* effects, we don't want to rely on that here).
*/
if (spa->spa_uberblock.ub_rootbp.blk_birth < txg &&
!dmu_objset_is_dirty(mos, txg)) {
/*
* Nothing changed on the first pass,
* therefore this TXG is a no-op. Avoid
* syncing deferred frees, so that we
* can keep this TXG as a no-op.
*/
ASSERT(txg_list_empty(&dp->dp_dirty_datasets,
txg));
ASSERT(txg_list_empty(&dp->dp_dirty_dirs, txg));
ASSERT(txg_list_empty(&dp->dp_sync_tasks, txg));
break;
}
spa_sync_deferred_frees(spa, tx);
}
} while (dmu_objset_is_dirty(mos, txg));
#ifdef ZFS_DEBUG
if (!list_is_empty(&spa->spa_config_dirty_list)) {
/*
* Make sure that the number of ZAPs for all the vdevs matches
* the number of ZAPs in the per-vdev ZAP list. This only gets
* called if the config is dirty; otherwise there may be
* outstanding AVZ operations that weren't completed in
* spa_sync_config_object.
*/
uint64_t all_vdev_zap_entry_count;
ASSERT0(zap_count(spa->spa_meta_objset,
spa->spa_all_vdev_zaps, &all_vdev_zap_entry_count));
ASSERT3U(vdev_count_verify_zaps(spa->spa_root_vdev), ==,
all_vdev_zap_entry_count);
}
#endif
if (spa->spa_vdev_removal != NULL) {
ASSERT0(spa->spa_vdev_removal->svr_bytes_done[txg & TXG_MASK]);
}
/*
* Rewrite the vdev configuration (which includes the uberblock)
* to commit the transaction group.
*
* If there are no dirty vdevs, we sync the uberblock to a few
* random top-level vdevs that are known to be visible in the
* config cache (see spa_vdev_add() for a complete description).
* If there *are* dirty vdevs, sync the uberblock to all vdevs.
*/
for (;;) {
/*
* We hold SCL_STATE to prevent vdev open/close/etc.
* while we're attempting to write the vdev labels.
*/
spa_config_enter(spa, SCL_STATE, FTAG, RW_READER);
if (list_is_empty(&spa->spa_config_dirty_list)) {
vdev_t *svd[SPA_DVAS_PER_BP];
int svdcount = 0;
int children = rvd->vdev_children;
int c0 = spa_get_random(children);
for (int c = 0; c < children; c++) {
vd = rvd->vdev_child[(c0 + c) % children];
if (vd->vdev_ms_array == 0 || vd->vdev_islog ||
!vdev_is_concrete(vd))
continue;
svd[svdcount++] = vd;
if (svdcount == SPA_DVAS_PER_BP)
break;
}
error = vdev_config_sync(svd, svdcount, txg);
} else {
error = vdev_config_sync(rvd->vdev_child,
rvd->vdev_children, txg);
}
if (error == 0)
spa->spa_last_synced_guid = rvd->vdev_guid;
spa_config_exit(spa, SCL_STATE, FTAG);
if (error == 0)
break;
zio_suspend(spa, NULL, ZIO_SUSPEND_IOERR);
zio_resume_wait(spa);
}
dmu_tx_commit(tx);
taskq_cancel_id(system_delay_taskq, spa->spa_deadman_tqid);
spa->spa_deadman_tqid = 0;
/*
* Clear the dirty config list.
*/
while ((vd = list_head(&spa->spa_config_dirty_list)) != NULL)
vdev_config_clean(vd);
/*
* Now that the new config has synced transactionally,
* let it become visible to the config cache.
*/
if (spa->spa_config_syncing != NULL) {
spa_config_set(spa, spa->spa_config_syncing);
spa->spa_config_txg = txg;
spa->spa_config_syncing = NULL;
}
dsl_pool_sync_done(dp, txg);
mutex_enter(&spa->spa_alloc_lock);
VERIFY0(avl_numnodes(&spa->spa_alloc_tree));
mutex_exit(&spa->spa_alloc_lock);
/*
* Update usable space statistics.
*/
while ((vd = txg_list_remove(&spa->spa_vdev_txg_list, TXG_CLEAN(txg))))
vdev_sync_done(vd, txg);
spa_update_dspace(spa);
/*
* It had better be the case that we didn't dirty anything
* since vdev_config_sync().
*/
ASSERT(txg_list_empty(&dp->dp_dirty_datasets, txg));
ASSERT(txg_list_empty(&dp->dp_dirty_dirs, txg));
ASSERT(txg_list_empty(&spa->spa_vdev_txg_list, txg));
spa->spa_sync_pass = 0;
/*
* Update the last synced uberblock here. We want to do this at
* the end of spa_sync() so that consumers of spa_last_synced_txg()
* will be guaranteed that all the processing associated with
* that txg has been completed.
*/
spa->spa_ubsync = spa->spa_uberblock;
spa_config_exit(spa, SCL_CONFIG, FTAG);
spa_handle_ignored_writes(spa);
/*
* If any async tasks have been requested, kick them off.
*/
spa_async_dispatch(spa);
}
/*
* Sync all pools. We don't want to hold the namespace lock across these
* operations, so we take a reference on the spa_t and drop the lock during the
* sync.
*/
void
spa_sync_allpools(void)
{
spa_t *spa = NULL;
mutex_enter(&spa_namespace_lock);
while ((spa = spa_next(spa)) != NULL) {
if (spa_state(spa) != POOL_STATE_ACTIVE ||
!spa_writeable(spa) || spa_suspended(spa))
continue;
spa_open_ref(spa, FTAG);
mutex_exit(&spa_namespace_lock);
txg_wait_synced(spa_get_dsl(spa), 0);
mutex_enter(&spa_namespace_lock);
spa_close(spa, FTAG);
}
mutex_exit(&spa_namespace_lock);
}
/*
* ==========================================================================
* Miscellaneous routines
* ==========================================================================
*/
/*
* Remove all pools in the system.
*/
void
spa_evict_all(void)
{
spa_t *spa;
/*
* Remove all cached state. All pools should be closed now,
* so every spa in the AVL tree should be unreferenced.
*/
mutex_enter(&spa_namespace_lock);
while ((spa = spa_next(NULL)) != NULL) {
/*
* Stop async tasks. The async thread may need to detach
* a device that's been replaced, which requires grabbing
* spa_namespace_lock, so we must drop it here.
*/
spa_open_ref(spa, FTAG);
mutex_exit(&spa_namespace_lock);
spa_async_suspend(spa);
mutex_enter(&spa_namespace_lock);
spa_close(spa, FTAG);
if (spa->spa_state != POOL_STATE_UNINITIALIZED) {
spa_unload(spa);
spa_deactivate(spa);
}
spa_remove(spa);
}
mutex_exit(&spa_namespace_lock);
}
vdev_t *
spa_lookup_by_guid(spa_t *spa, uint64_t guid, boolean_t aux)
{
vdev_t *vd;
int i;
if ((vd = vdev_lookup_by_guid(spa->spa_root_vdev, guid)) != NULL)
return (vd);
if (aux) {
for (i = 0; i < spa->spa_l2cache.sav_count; i++) {
vd = spa->spa_l2cache.sav_vdevs[i];
if (vd->vdev_guid == guid)
return (vd);
}
for (i = 0; i < spa->spa_spares.sav_count; i++) {
vd = spa->spa_spares.sav_vdevs[i];
if (vd->vdev_guid == guid)
return (vd);
}
}
return (NULL);
}
void
spa_upgrade(spa_t *spa, uint64_t version)
{
ASSERT(spa_writeable(spa));
spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
/*
* This should only be called for a non-faulted pool, and since a
* future version would result in an unopenable pool, this shouldn't be
* possible.
*/
ASSERT(SPA_VERSION_IS_SUPPORTED(spa->spa_uberblock.ub_version));
ASSERT3U(version, >=, spa->spa_uberblock.ub_version);
spa->spa_uberblock.ub_version = version;
vdev_config_dirty(spa->spa_root_vdev);
spa_config_exit(spa, SCL_ALL, FTAG);
txg_wait_synced(spa_get_dsl(spa), 0);
}
boolean_t
spa_has_spare(spa_t *spa, uint64_t guid)
{
int i;
uint64_t spareguid;
spa_aux_vdev_t *sav = &spa->spa_spares;
for (i = 0; i < sav->sav_count; i++)
if (sav->sav_vdevs[i]->vdev_guid == guid)
return (B_TRUE);
for (i = 0; i < sav->sav_npending; i++) {
if (nvlist_lookup_uint64(sav->sav_pending[i], ZPOOL_CONFIG_GUID,
&spareguid) == 0 && spareguid == guid)
return (B_TRUE);
}
return (B_FALSE);
}
/*
* Check if a pool has an active shared spare device.
* Note: reference count of an active spare is 2, as a spare and as a replace
*/
static boolean_t
spa_has_active_shared_spare(spa_t *spa)
{
int i, refcnt;
uint64_t pool;
spa_aux_vdev_t *sav = &spa->spa_spares;
for (i = 0; i < sav->sav_count; i++) {
if (spa_spare_exists(sav->sav_vdevs[i]->vdev_guid, &pool,
&refcnt) && pool != 0ULL && pool == spa_guid(spa) &&
refcnt > 2)
return (B_TRUE);
}
return (B_FALSE);
}
sysevent_t *
spa_event_create(spa_t *spa, vdev_t *vd, nvlist_t *hist_nvl, const char *name)
{
sysevent_t *ev = NULL;
#ifdef _KERNEL
nvlist_t *resource;
resource = zfs_event_create(spa, vd, FM_SYSEVENT_CLASS, name, hist_nvl);
if (resource) {
ev = kmem_alloc(sizeof (sysevent_t), KM_SLEEP);
ev->resource = resource;
}
#endif
return (ev);
}
void
spa_event_post(sysevent_t *ev)
{
#ifdef _KERNEL
if (ev) {
zfs_zevent_post(ev->resource, NULL, zfs_zevent_post_cb);
kmem_free(ev, sizeof (*ev));
}
#endif
}
/*
* Post a zevent corresponding to the given sysevent. The 'name' must be one
* of the event definitions in sys/sysevent/eventdefs.h. The payload will be
* filled in from the spa and (optionally) the vdev. This doesn't do anything
* in the userland libzpool, as we don't want consumers to misinterpret ztest
* or zdb as real changes.
*/
void
spa_event_notify(spa_t *spa, vdev_t *vd, nvlist_t *hist_nvl, const char *name)
{
spa_event_post(spa_event_create(spa, vd, hist_nvl, name));
}
#if defined(_KERNEL) && defined(HAVE_SPL)
/* state manipulation functions */
EXPORT_SYMBOL(spa_open);
EXPORT_SYMBOL(spa_open_rewind);
EXPORT_SYMBOL(spa_get_stats);
EXPORT_SYMBOL(spa_create);
EXPORT_SYMBOL(spa_import);
EXPORT_SYMBOL(spa_tryimport);
EXPORT_SYMBOL(spa_destroy);
EXPORT_SYMBOL(spa_export);
EXPORT_SYMBOL(spa_reset);
EXPORT_SYMBOL(spa_async_request);
EXPORT_SYMBOL(spa_async_suspend);
EXPORT_SYMBOL(spa_async_resume);
EXPORT_SYMBOL(spa_inject_addref);
EXPORT_SYMBOL(spa_inject_delref);
EXPORT_SYMBOL(spa_scan_stat_init);
EXPORT_SYMBOL(spa_scan_get_stats);
/* device maniion */
EXPORT_SYMBOL(spa_vdev_add);
EXPORT_SYMBOL(spa_vdev_attach);
EXPORT_SYMBOL(spa_vdev_detach);
EXPORT_SYMBOL(spa_vdev_setpath);
EXPORT_SYMBOL(spa_vdev_setfru);
EXPORT_SYMBOL(spa_vdev_split_mirror);
/* spare statech is global across all pools) */
EXPORT_SYMBOL(spa_spare_add);
EXPORT_SYMBOL(spa_spare_remove);
EXPORT_SYMBOL(spa_spare_exists);
EXPORT_SYMBOL(spa_spare_activate);
/* L2ARC statech is global across all pools) */
EXPORT_SYMBOL(spa_l2cache_add);
EXPORT_SYMBOL(spa_l2cache_remove);
EXPORT_SYMBOL(spa_l2cache_exists);
EXPORT_SYMBOL(spa_l2cache_activate);
EXPORT_SYMBOL(spa_l2cache_drop);
/* scanning */
EXPORT_SYMBOL(spa_scan);
EXPORT_SYMBOL(spa_scan_stop);
/* spa syncing */
EXPORT_SYMBOL(spa_sync); /* only for DMU use */
EXPORT_SYMBOL(spa_sync_allpools);
/* properties */
EXPORT_SYMBOL(spa_prop_set);
EXPORT_SYMBOL(spa_prop_get);
EXPORT_SYMBOL(spa_prop_clear_bootfs);
/* asynchronous event notification */
EXPORT_SYMBOL(spa_event_notify);
#endif
#if defined(_KERNEL) && defined(HAVE_SPL)
module_param(spa_load_verify_maxinflight, int, 0644);
MODULE_PARM_DESC(spa_load_verify_maxinflight,
"Max concurrent traversal I/Os while verifying pool during import -X");
module_param(spa_load_verify_metadata, int, 0644);
MODULE_PARM_DESC(spa_load_verify_metadata,
"Set to traverse metadata on pool import");
module_param(spa_load_verify_data, int, 0644);
MODULE_PARM_DESC(spa_load_verify_data,
"Set to traverse data on pool import");
/* CSTYLED */
module_param(zio_taskq_batch_pct, uint, 0444);
MODULE_PARM_DESC(zio_taskq_batch_pct,
"Percentage of CPUs to run an IO worker thread");
#endif