306 lines
11 KiB
Groff
306 lines
11 KiB
Groff
.\" Copyright (c) 2006 Broadcom Corporation
|
|
.\" David Christensen <davidch@broadcom.com>. All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\"
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\" 3. Neither the name of Broadcom Corporation nor the name of its contributors
|
|
.\" may be used to endorse or promote products derived from this software
|
|
.\" without specific prior written consent.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS'
|
|
.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
|
|
.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
.\" THE POSSIBILITY OF SUCH DAMAGE.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd December 2, 2006
|
|
.Dt BCE 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm bce
|
|
.Nd "Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet adapter driver"
|
|
.Sh SYNOPSIS
|
|
To compile this driver into the kernel,
|
|
place the following lines in your
|
|
kernel configuration file:
|
|
.Bd -ragged -offset indent
|
|
.Cd "device miibus"
|
|
.Cd "device bce"
|
|
.Ed
|
|
.Pp
|
|
Alternatively, to load the driver as a
|
|
module at boot time, place the following line in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
if_bce_load="YES"
|
|
.Ed
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
driver supports Broadcom's NetXtreme II product family, including the
|
|
BCM5706 and BCM5708 Ethernet controllers.
|
|
.Pp
|
|
The NetXtreme II product family is composed of various Converged NIC (or CNIC)
|
|
Ethernet controllers which support a TCP Offload Engine (TOE), Remote DMA (RDMA),
|
|
and iSCSI acceleration, in addition to standard L2 Ethernet traffic, all on the
|
|
same controller.
|
|
The following features are supported in the
|
|
.Nm
|
|
driver under
|
|
.Fx :
|
|
.Pp
|
|
.Bl -item -offset indent -compact
|
|
.It
|
|
IP/TCP/UDP checksum offload
|
|
.It
|
|
Jumbo frames (up to 9022 bytes)
|
|
.It
|
|
VLAN tag stripping
|
|
.It
|
|
Interrupt coalescing
|
|
.It
|
|
10/100/1000Mbps operation in full-duplex mode
|
|
.It
|
|
10/100Mbps operation in half-duplex mode
|
|
.El
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver supports the following media types:
|
|
.Bl -tag -width ".Cm 10baseT/UTP"
|
|
.It Cm autoselect
|
|
Enable autoselection of the media type and options.
|
|
The user can manually override
|
|
the autoselected mode by adding media options to
|
|
.Xr rc.conf 5 .
|
|
.It Cm 10baseT/UTP
|
|
Set 10Mbps operation.
|
|
The
|
|
.Xr ifconfig 8
|
|
.Cm mediaopt
|
|
option can also be used to select either
|
|
.Cm full-duplex
|
|
or
|
|
.Cm half-duplex
|
|
modes.
|
|
.It Cm 100baseTX
|
|
Set 100Mbps (Fast Ethernet) operation.
|
|
The
|
|
.Xr ifconfig 8
|
|
.Cm mediaopt
|
|
option can also be used to select either
|
|
.Cm full-duplex
|
|
or
|
|
.Cm half-duplex
|
|
modes.
|
|
.It Cm 1000baseTX
|
|
Set 1000baseTX operation over twisted pair.
|
|
Only
|
|
.Cm full-duplex
|
|
mode is supported.
|
|
.El
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver supports the following media options:
|
|
.Bl -tag -width ".Cm full-duplex"
|
|
.It Cm full-duplex
|
|
Force full duplex operation.
|
|
.It Cm half-duplex
|
|
Force half duplex operation.
|
|
.El
|
|
.Pp
|
|
For more information on configuring this device, see
|
|
.Xr ifconfig 8 .
|
|
.Sh HARDWARE
|
|
The
|
|
.Nm
|
|
driver provides support for various NICs based on the Broadcom NetXtreme II
|
|
family of Gigabit Ethernet controllers, including the
|
|
following:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
HP NC370T Multifunction Gigabit Server Adapter
|
|
.It
|
|
HP NC370i Multifunction Gigabit Server Adapter
|
|
.El
|
|
.Sh DIAGNOSTICS
|
|
.Bl -diag
|
|
.It "bce%d: PCI memory allocation failed!"
|
|
The driver has encountered a fatal initialization error.
|
|
.It "bce%d: PCI map interrupt failed!"
|
|
The driver has encountered a fatal initialization error.
|
|
.It "bce%d: Unsupported controller revision (%c%d)"
|
|
The driver does not support the controller revision in use.
|
|
.It "bce%d: SerDes controllers are not supported!"
|
|
The driver does not currently support SerDes/Fiber versions of the
|
|
NetXtreme II controller.
|
|
.It "bce%d: Controller initialization failed!"
|
|
The driver has encountered a fatal initialization error.
|
|
.It "bce%d: NVRAM test failed!"
|
|
The driver could not access the controller NVRAM correctly.
|
|
.It "bce%d: DMA resource allocation failed!"
|
|
The driver could not allocate DMA memory to setup the controllers
|
|
host memory data structures.
|
|
.It "bce%d: Interface allocation failed!"
|
|
The driver could not create a network interface for the controller.
|
|
.It "bce%d: PHY probe failed!"
|
|
The driver could not access the PHY used by the controller.
|
|
.It "bce%d: Failed to setup IRQ!"
|
|
The driver could not initialize the IRQ handler.
|
|
.It "bce%d: Error: PHY read timeout!"
|
|
The driver could not read a PHY register before the timeout period expired.
|
|
.It "bce%d: PHY write timeout!"
|
|
The driver could not write to the PHY register because a timeout occurred.
|
|
.It "bce%d: Timeout error reading NVRAM at offset 0x%08X!"
|
|
The driver could not write to NVRAM because a timeout occurred.
|
|
.It "bce%d: Unknown Flash NVRAM found!"
|
|
The driver does not recognize the NVRAM device being used and therefore
|
|
cannot access it correctly.
|
|
.It "bce%d: Invalid NVRAM magic value!"
|
|
The driver cannot read NVRAM or the NVRAM is corrupt.
|
|
.It "bce%d: Invalid Manufacturing Information NVRAM CRC!"
|
|
The driver cannot read NVRAM or the NVRAM is corrupt.
|
|
.It "bce%d: Invalid Feature Configuration Information NVRAM CRC!"
|
|
The driver cannot read NVRAM or the NVRAM is corrupt.
|
|
.It "bce%d: DMA mapping error!"
|
|
The driver was unable to map memory into DMA addressable space required
|
|
by the controller.
|
|
.It "bce%d: Could not allocate parent DMA tag!"
|
|
The driver could not allocate a PCI compatible DMA tag.
|
|
.It "bce%d: Could not allocate status block DMA tag!"
|
|
The driver could not allocate a DMA tag for the controller's
|
|
status block.
|
|
.It "bce%d: Could not allocate status block DMA memory!"
|
|
The driver could not allocate DMA addressable memory for the controller's
|
|
status block.
|
|
.It "bce_d: Could not map status block DMA memory!"
|
|
The driver could not map the status block memory into the controller's DMA
|
|
address space.
|
|
.It "bce%d: Could not allocate statistics block DMA tag!"
|
|
The driver could not allocate a DMA tag for the controller's
|
|
statistics block.
|
|
.It "bce%d: Could not allocate statistics block DMA memory!"
|
|
The driver could not allocate DMA addressable memory for the controller's
|
|
statistics block.
|
|
.It "bce%d: Could not map statistics block DMA memory!"
|
|
The driver could not map the statistics block memory into the controller's DMA
|
|
address space.
|
|
.It "bce%d: Could not allocate TX descriptor chain DMA tag!"
|
|
The driver could not allocate a DMA tag for the controller's
|
|
TX chain.
|
|
.It "bce%d: Could not allocate TX descriptor chain DMA memory!
|
|
The driver could not allocate DMA addressable memory for the controller's
|
|
TX chain.
|
|
.It "bce%d: Could not map TX descriptor chain DMA memory!"
|
|
The driver could not map the TX descriptor chain memory into the controller's DMA
|
|
address space.
|
|
.It "bce%d: Could not allocate TX mbuf DMA tag!"
|
|
The driver could not allocate a DMA tag for the controller's
|
|
TX mbuf memory.
|
|
.It "bce%d: Unable to create TX mbuf DMA map!"
|
|
The driver could not map the TX mbuf memory into the controller's DMA
|
|
address space.
|
|
.It "bce%d: Could not allocate RX descriptor chain DMA tag!"
|
|
The driver could not allocate a DMA tag for the controller's
|
|
RX chain.
|
|
.It "bce%d: Could not allocate RX descriptor chain "
|
|
The driver could not allocate DMA addressable memory for the controller's
|
|
RX chain.
|
|
.It "bce%d: Could not map RX descriptor chain DMA memory!"
|
|
The driver could not map the RX descriptor chain memory into the controller's DMA
|
|
address space.
|
|
.It "bce%d: Could not allocate RX mbuf DMA tag!"
|
|
The driver could not allocate a DMA tag for the controller's
|
|
RX mbuf memory.
|
|
.It "bce%d: Unable to create RX mbuf DMA map!"
|
|
The driver could not map the RX mbuf memory into the controller's DMA
|
|
address space.
|
|
.It "bce%d: Firmware synchronization timeout!"
|
|
The driver was not able to synchronize with the firmware running on the
|
|
controller.
|
|
The firmware may be stopped or hung.
|
|
.It "bce%d: Invalid Ethernet address!"
|
|
The driver was not able to read a valid Ethernet MAC address from NVRAM.
|
|
.It "bce%d: Reset failed!"
|
|
The driver has encountered a fatal initialization error.
|
|
.It "bce%d: Byte swap is incorrect!"
|
|
The driver has encountered a fatal initialization error.
|
|
Contact the author
|
|
with details of the CPU architecture and system chipset in use.
|
|
.It "bce%d: Firmware did not complete initialization!"
|
|
The driver has encountered a fatal initialization error.
|
|
.It "bce%d: Bootcode not running!"
|
|
The driver has encountered a fatal initialization error.
|
|
.It "bce%d: Error mapping mbuf into RX chain!"
|
|
The driver could not map a RX mbuf into DMA addressable memory.
|
|
.It "bce%d: Error filling RX chain: rx_bd[0x%04X]!"
|
|
The driver was unable to allocate enough mbufs to fill the RX chain
|
|
during initialization.
|
|
Try increasing the number of mbufs available in
|
|
the system, increase system memory, or if using jumbo frames, make sure
|
|
enough 9KB mbufs are available.
|
|
.It "bce%d: Failed to allocate new mbuf, incoming frame dropped!"
|
|
The driver was unable to allocate a new mbuf for the RX chain and reused
|
|
the mbuf for the received frame, dropping the incoming frame in the process.
|
|
Try increasing the number of mbufs available in the system or increase system
|
|
memory.
|
|
.It "bce%d: Controller reset failed!"
|
|
A fatal initialization error has occurred.
|
|
.It "bce%d: Controller initialization failed!"
|
|
A fatal initialization error has occurred.
|
|
.It "bce%d: Block initialization failed!"
|
|
A fatal initialization error has occurred.
|
|
.It "bce%d: Error mapping mbuf into TX chain!"
|
|
The driver could not map a TX mbuf into DMA addressable memory.
|
|
.It "bce%d: Error registering poll function!"
|
|
The driver received an error while attempting to register the poll function.
|
|
.It "bce%d: Changing VLAN_MTU not supported."
|
|
Changing the VLAN MTU is not currently supported by the driver.
|
|
.It "bce%d: Cannot change VLAN_HWTAGGING while management firmware (ASF/IPMI/UMP) is running!"
|
|
Management firmware to support ASF/IPMI/UMP requires that VLAN
|
|
tag stripping be enabled in the controller.
|
|
.It "bce%d: Changing VLAN_HWTAGGING not supported!"
|
|
Disabling VLAN tag stripping is not currently supported by the driver.
|
|
.It "bce%d: Watchdog timeout occurred, resetting!"
|
|
The device has stopped responding to the network, there is a problem
|
|
with the cable connection, or a driver logic problem has occurred..
|
|
.It "bce%d: Fatal attention detected: 0x%08X!"
|
|
A controller hardware failure has occurred.
|
|
If the problem continues replace the controller.
|
|
.El
|
|
.Sh SEE ALSO
|
|
.Xr altq 4 ,
|
|
.Xr arp 4 ,
|
|
.Xr miibus 4 ,
|
|
.Xr netintro 4 ,
|
|
.Xr ng_ether 4 ,
|
|
.Xr vlan 4 ,
|
|
.Xr ifconfig 8
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
device driver first appeared in
|
|
.Fx 6.1 .
|
|
.Sh AUTHORS
|
|
The
|
|
.Nm
|
|
driver was written by
|
|
.An David Christensen Aq davidch@broadcom.com .
|